Age | Commit message (Collapse) | Author |
|
Move the following tools documentation files to the new tools manual:
docs/interop/qemu-img.rst
docs/interop/qemu-nbd.rst
docs/interop/virtfs-proxy-helper.rst
docs/interop/qemu-trace-stap.rst
docs/interop/virtiofsd.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-4-peter.maydell@linaro.org
|
|
The qemu-option-trace.rst.inc file contains a rST documentation
fragment which describes trace options common to qemu-nbd and
qemu-img. We put this file into interop/, but we'd like to move the
qemu-nbd and qemu-img files into the tools/ manual. We could move
the .rst.inc file along with them, but we're eventually going to want
to use it for the main QEMU binary options documentation too, and
that will be in system/. So move qemu-option-trace.rst.inc to the
top-level docs/ directory, where all these files can include it via
.. include:: ../qemu-option-trace.rst.inc
This does have the slight downside that we now need to explicitly
tell Make which manuals use this file rather than relying on
a wildcard for all .rst.inc in the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-3-peter.maydell@linaro.org
|
|
Some of the documentation for QEMU "tools" which are standalone
binaries like qemu-img is an awkward fit in our current 5-manual
split. We've put it into "interop", but they're not really
about interoperability.
Create a new top level manual "tools" which will be a better
home for this documentation. This commit creates an empty
initial manual; we will move the relevant documentation
files in a subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200217155415.30949-2-peter.maydell@linaro.org
|
|
staging
Pull request
This pull request contains a virtio-blk/scsi performance optimization, event
loop scalability improvements, and a qtest-based device fuzzing framework. I
am including the fuzzing patches because I have reviewed them and Thomas Huth
is currently away on leave.
# gpg: Signature made Sat 22 Feb 2020 08:50:05 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request: (31 commits)
fuzz: add documentation to docs/devel/
fuzz: add virtio-scsi fuzz target
fuzz: add virtio-net fuzz target
fuzz: add i440fx fuzz targets
fuzz: add configure flag --enable-fuzzing
fuzz: add target/fuzz makefile rules
fuzz: add support for qos-assisted fuzz targets
fuzz: support for fork-based fuzzing.
main: keep rcu_atfork callback enabled for qtest
exec: keep ram block across fork when using qtest
fuzz: add fuzzer skeleton
libqos: move useful qos-test funcs to qos_external
libqos: split qos-test and libqos makefile vars
libqos: rename i2c_send and i2c_recv
qtest: add in-process incoming command handler
libqtest: make bufwrite rely on the TransportOps
libqtest: add a layer of abstraction to send/recv
qtest: add qtest_server_send abstraction
fuzz: add FUZZ_TARGET module type
module: check module wasn't already initialized
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200220041118.23264-18-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Patch 6a7e2bbee5 docs: add virtiofsd(1) man page introduced new man
page virtiofsd.1. Unfortunately, wrong file location is used as
source for install command. This cause installation of docs fail.
Fixing wrong location so installation is successful.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <1608747495.7195569.1581513386780.JavaMail.zimbra@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Fix a typo in the dependency list for the manpages built from the
'interop' manual, which meant we were accidentally not including
the .hx file in the dependency list.
Fixes: e13c59fa4414215500e6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-4-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Document the virtiofsd(1) program and its command-line options. This
man page is a rST conversion of the original texi documentation that I
wrote.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The hw/*/Kconfig files should be sourced from hw/Kconfig, so there
is no need to pass them along as input files to minikconfig. We should
use the hw/*/Kconfig wildcard only for build dependencies in the Makefile.
With this change, there are now no duplicate entries in the generated
*-softmmu/config-devices.mak.d files anymore, and there is finally a
chance to get rid of stale Kconfig files like hw/bt/Kconfig, too (once
they do not show up in the config-devices.mak.d files now anymore).
Message-Id: <20200203153905.20544-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The virtfs-proxy-helper documentation is currently in
fsdev/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a virtfs-proxy-helper manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a virtfs-proxy-helper manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes. In particular I've split the -u and -g
options into each having their own description text.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20200124162606.8787-9-peter.maydell@linaro.org
|
|
The qemu-trace-stap documentation is currently in
scripts/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a qemu-trace-stap manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a qemu-trace-stap manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
|
|
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-img manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-img manpage
* part of the interop/ Sphinx manual
The qemu-img rST document uses the new hxtool extension
to handle pulling rST fragments out of qemu-img-cmds.hx.
The documentation of the various options and commands is rather
muddled, with some options being described inside the relevant
command description and some in a more general section near the start
of the manual. All the command synopses are replicated in the .hx
file and then again in the manual. A lot of text is also duplicated
in the qemu-img.c code for the help text. I have not attempted to
deal with any of this, but have simply transposed the existing
structure into rST.
As usual, there are some minor formatting changes but no
textual changes, except that as with one or two other conversions
I have dropped the 'see also' section since it's not very
informative and looks odd in the HTML.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
|
|
Sphinx will corrupt its doctree cache if we run two copies
of it in parallel. In commit 6bda415c10d966c8d3 we worked
around this by having separate doctrees for 'html' vs 'manpage'
runs. However now that we have more than one manpage produced
from a single manual we can run into this again when trying
to produce the two manpages.
Use the trick described in 'Atomic Rules in GNU Make'
https://www.cmcrossroads.com/article/atomic-rules-gnu-make
to ensure that we only run the Sphinx manpage builder once
for each manual, even if we're producing several manpages.
This fixes doctree corruption in parallel builds and also
avoids pointlessly running Sphinx more often than we need to.
(In GNU Make 4.3 there is builtin support for this, via
the "&:" syntax, but we can't wait for that to be available
in all the distros we support...)
The generic "one invocation for multiple output files"
machinery is provided as a macro named 'atomic' in rules.mak;
we then wrap this in a more specific macro for defining
the rule and dependencies for the manpages in a Sphinx
manual, to avoid excessive repetition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-2-peter.maydell@linaro.org
|
|
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
libcap-ng reads /proc during capng_get_caps_process, and virtiofsd's
sandboxing doesn't have /proc mounted; thus we have to do the
caps read before we sandbox it and save/restore the state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Only allow system calls that are needed by virtiofsd. All other system
calls cause SIGSYS to be directed at the thread and the process will
coredump.
Restricting system calls reduces the kernel attack surface and limits
what the process can do when compromised.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
with additional entries by:
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: piaojun <piaojun@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Eric Ren <renzhen@linux.alibaba.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Install a vhost-user.json file describing virtiofsd. This allows
libvirt and other management tools to enumerate vhost-user backend
programs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Wire up the building of the virtiofsd in tools.
virtiofsd relies on Linux-specific system calls and seccomp. Anyone
wishing to port it to other host operating systems should do so
carefully and without reducing security.
Only allow building on Linux hosts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The qemu-block-drivers documentation is currently in
docs/qemu-block-drivers.texi in Texinfo format, which we present
to the user as:
* a qemu-block-drivers manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-block-drivers manpage
* part of the system/ Sphinx manual
This follows the same pattern we've done for qemu-ga and qemu-nbd.
We have to drop a cross-reference from the documentation of the
-cdrom option back to the qemu-block-drivers documentation, since
they're no longer within the same texinfo document.
As noted in a comment, the manpage output is slightly compromised
due to limitations in Sphinx. In an ideal world, the HTML output
would have the various headings like 'Disk image file formats'
as top-level section headings (which then appear in the overall
system manual's table-of-contents), and it would not have the
section headings which make sense only for the manpage like
'synopsis', 'description', and 'see also'. Unfortunately, the
mechanism Sphinx provides for restricting pieces of documentation
is limited to the point of being flawed: the 'only::' directive
is implemented as a filter that is applied at a very late stage
in the document processing pipeline, rather than as an early
equivalent of an #ifdef. This means that Sphinx's process of
identifying which section heading markup styles are which levels
of heading gets confused if the 'only::' directive contains
section headings which would affect the heading-level of a
later heading. I have opted to prioritise making the HTML format
look better, with the compromise being that in the manpage
the 'Disk image file formats' &c headings are top-level headings
rather than being sub-headings under the traditional 'Description'
top-level section title.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
|
|
We want a user-facing manual which contains system emulation
documentation. Create an empty one which we can populate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-3-peter.maydell@linaro.org
|
|
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-nbd manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-nbd manpage
* part of the interop/ Sphinx manual
This follows the same pattern as commit 27a296fce982 did for the
qemu-ga manpage.
All the content of the old manpage is retained, except that I have
dropped the "This is free software; see the source for copying
conditions. There is NO warranty..." text that was in the old AUTHOR
section; Sphinx's manpage builder doesn't expect that much text in
the AUTHOR section, and since none of our other manpages have it it
seems easiest to delete it rather than try to figure out where else
in the manpage to put it.
The only other textual change is that I have had to give the
--nocache option its own description ("Equivalent to --cache=none")
because Sphinx doesn't have an equivalent of using item/itemx
to share a description between two options.
Some minor aspects of the formatting have changed, to suit what is
easiest for Sphinx to output. (The most notable is that Sphinx
option section option syntax doesn't support '--option foo=bar'
with bar underlined rather than bold, so we have to switch to
'--option foo=BAR' instead.)
The contents of qemu-option-trace.texi are now duplicated in
docs/interop/qemu-option-trace.rst.inc, until such time as we complete
the conversion of the other files which use it; since it has had only
3 changes in 3 years, this shouldn't be too awkward a burden.
(We use .rst.inc because if this file fragment has a .rst extension
then Sphinx complains about not seeing it in a toctree.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
|
|
The MANUAL_BUILDDIR directory is automatically created by sphinx-build
for the other targets. The index.html target does not use sphinx-build
so we must manually create the directory to avoid the following error:
GEN docs/built/index.html
/bin/sh: docs/built/index.html: No such file or directory
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120163400.603449-1-stefanha@redhat.com
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
QAPI patches for 2020-01-14
# gpg: Signature made Tue 14 Jan 2020 10:15:22 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-01-14:
qapi: Simplify QAPISchemaModularCVisitor
qapi: Fix code generation for empty modules
qapi: Proper intermediate representation for modules
qapi: Generate command registration stuff into separate files
tests/Makefile.include: Fix missing test-qapi-emit-events.[ch]
qapi: Tweak "command returns a nice type" check for clarity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
There is no index.html start page for the QEMU HTML documentation. An
index page is needed so that documentation can be browsed easily on the
web.
This patch adds an index.html.in template file where the QEMU version
number is expanded. It is written in HTML instead of using the existing
sphinx (rST) and texi documentation generators because they are
heavyweight and would make this harder.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191219135620.1626608-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Turn off Sphinx nitpicking as a temporary (?) measure so
sphinx builds complete even with warnings about missing
references.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-11-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qcrypto_random_*, AES and qcrypto_init do not need to be linked as a whole
and are the only parts that are used by user-mode emulation. Place them
in libqemuutil, so that whatever needs them will pick them up automatically.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vhost-user-gpu is always built and installed, but it is not part of the emulator
proper. Cut it if --disable-tools is specified.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
virtfs-proxy-helper is the only user of libcap; everyone else is using
the simpler libcap-ng API. Switch and remove the configure code to
detect libcap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug: - drop remaining -lcap from Makefile
- fix error message in configure]
Signed-off-by: Greg Kurz <groug@kaod.org>
|
|
'remotes/vivier2/tags/trivial-branch-pull-request' into staging
Trivial fixes (20191112)
ivshmem-server, error messages (numa, qom) and
Makefile (bios-microvm) fixes
# gpg: Signature made Tue 12 Nov 2019 10:04:03 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-pull-request:
ivshmem-server: Terminate also on SIGINT
ivshmem-server: Clean up shmem on shutdown
numa: Add missing \n to error message
qom: Fix error message in object_class_property_add()
Makefile: install bios-microvm like other binary blobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit 0d5fae3e52e introduced bios-microvm.bin but forgot to add
it to the list of blobs being installed.
Add it to the list of BLOBS that get installed.
Fixes: 0d5fae3e52e "roms: add microvm-bios (qboot) as binary"
Signed-off-by: Bruce Rogers <brogers@suse.com>
[PMD: Reworded description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191102114346.6445-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
The EDK2 firmware blobs only target the X86/ARM architectures.
Define the DECOMPRESS_EDK2_BLOBS variable and only decompress
the blobs when the variable exists.
See also: 536d2173b2b ("roms: build edk2 firmware binaries ...")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-2-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When hw/$DIR/Kconfig is changed, the corresponding generated
hw/$DIR/config-devices.mak is not being updated.
Fix this by including all the hw/*/Kconfig files to the prerequisite
names of the rule generating the config-devices.mak files.
Fixes: e0e312f3525a (build: switch to Kconfig)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved into plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved directory and merged various fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
|
|
sphinx-build is buggy when multiple processes are using the same
doctree directory in parallel. See the 3-year-old Sphinx bug
report at: https://github.com/sphinx-doc/sphinx/issues/2946
Instead of avoiding parallel builds or adding some kind of
locking, I'm using the simplest solution: just using a different
doctree cache for each builder.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191014150133.14318-1-ehabkost@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The slirp sub-module complains about not being able to find the glib
library on cross-compiles because it is using the default pkg-config
tool (which isn't installed in our cross-build docker images).
Preserve PKG_CONFIG in our host config and pass it down to slirp.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
In commit 27a296fce9821e we switched the qemu-ga manpage over to
being built from Sphinx. The makefile rules for this were correct
for an out-of-tree build, but break for in-tree builds if Sphinx is
present and we're trying to build the documentation.
Specifically, because Sphinx refuses to build output files into
the same directory as its sources, for an in-tree build we tell
it to build into a subdirectory docs/built, and set up a makefile
variable MANUAL_BUILDDIR indicating where the docs are going.
The makefile rule telling Make how to build qemu-ga.8 correctly
used this variable, but the lines adding qemu-ga.8 to the list
of DOCS to be built and the 'make install' rune did not. The
effect was that for an in-tree build we told Make to build
'docs/interop/qemu-ga.8' but did not provide a specific rule for
doing so, which caused Make to fall back to the old rules.make
rule for building any "%.8" file. Make tried to invoke texi2pod
with a bogus command line, resulting in the error:
GEN docs/interop/qemu-ga.8
No filename or title
make: *** [rules.mak:394: docs/interop/qemu-ga.8]
Fix this by using $(MANUAL_BUILDDIR) when constructing the
list of DOCS files we want to build and also in the source
file name we install for 'make install'.
(Among other things, this broke the Shippable CI builds.)
Fixes: 27a296fce9821e
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190919155957.12618-1-peter.maydell@linaro.org
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The qemu-ga documentation is currently in qemu-ga.texi in
Texinfo format, which we present to the user as:
* a qemu-ga manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-ga manpage
* part of the interop/ Sphinx manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
|
|
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
|
|
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage
of including it also if e.g. qemu-ga is requested. The correct
information is available in configure, define it there.
This also has the benefit of not installing the manpages for block layer
tools if the only "tool" being built is the guest agent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|