summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-27s390x: Rename and use constants for short PSW address and maskJanosch Frank
Let's rename PSW_MASK_ESA_ADDR to PSW_MASK_SHORT_ADDR because we're not working with a ESA PSW which would not support the extended addressing bit. Also let's actually use it. Additionally we introduce PSW_MASK_SHORT_CTRL and use it throughout the codebase. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200227092341.38558-1-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26docs: rstfy vfio-ap documentationCornelia Huck
Move to system/, as this is mostly about configuring vfio-ap. Message-Id: <20200213162942.14177-3-cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26docs: rstfy s390 dasd ipl documentationCornelia Huck
While at it, also fix the numbering in 'What QEMU does'. Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200213162942.14177-2-cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26s390/sclp: improve special wait psw logicChristian Borntraeger
There is a special quiesce PSW that we check for "shutdown". Otherwise disabled wait is detected as "crashed". Architecturally we must only check PSW bits 116-127. Fix this. Cc: qemu-stable@nongnu.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1582204582-22995-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26s390x: Add missing vcpu reset functionsJanosch Frank
Up to now we only had an ioctl to reset vcpu data QEMU couldn't reach for the initial reset, which was also called for the clear reset. To be architecture compliant, we also need to clear local interrupts on a normal reset. Because of this and the upcoming protvirt support we need to add ioctls for the missing clear and normal resets. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <20200214151636.8764-3-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26linux-headers: updateCornelia Huck
Update to commit b1da3acc781c ("Merge tag 'ecryptfs-5.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs") Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26target/s390x/translate: Fix RNSBG instructionThomas Huth
RNSBG is handled via the op_rosbg() helper function. But RNSBG has the opcode 0xEC54, i.e. 0x54 as second byte, while op_rosbg() currently checks for 0x55. This seems to be a typo, fix it to use 0x54 instead, so that op_rosbg() does not abort() anymore if a program uses RNSBG. I've checked with a simple test function that I now get the same results with KVM and with TCG: static void test_rnsbg(void) { uint64_t r1, r2; r2 = 0xffff000000000000UL; r1 = 0x123456789bdfaaaaUL; asm volatile (" rnsbg %0,%1,12,61,16 " : "+r"(r1) : "r"(r2)); printf("r1 afterwards: 0x%lx\n", r1); } Buglink: https://bugs.launchpad.net/qemu/+bug/1860920 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200130133417.10531-1-thuth@redhat.com> Fixes: d6c6372e186e ("target-s390: Implement R[NOX]SBG") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* device_del fix (Julia) * FXAM fix (myself) * memdev refactoring (Igor) * memory region API cleanups (Peter, Philippe) * ioeventfd optimization (Stefan) * new WHPX maintainer (Sunil) * Large guest startup optimizations (Chen) # gpg: Signature made Tue 25 Feb 2020 12:42:24 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (104 commits) WHPX: Assigning maintainer for Windows Hypervisor Platform accel/kvm: Check ioctl(KVM_SET_USER_MEMORY_REGION) return value target/i386: check for empty register in FXAM qdev-monitor: Forbid repeated device_del mem-prealloc: optimize large guest startup memory: batch allocate ioeventfds[] in address_space_update_ioeventfds() Avoid cpu_physical_memory_rw() with a constant is_write argument Let cpu_[physical]_memory() calls pass a boolean 'is_write' argument exec: Let cpu_[physical]_memory API use a boolean 'is_write' argument Avoid address_space_rw() with a constant is_write argument Let address_space_rw() calls pass a boolean 'is_write' argument exec: Let address_space_unmap() use a boolean 'is_write' argument hw/virtio: Let vhost_memory_map() use a boolean 'is_write' argument hw/virtio: Let virtqueue_map_iovec() use a boolean 'is_write' argument hw/ide: Let the DMAIntFunc prototype use a boolean 'is_write' argument hw/ide/internal: Remove unused DMARestartFunc typedef Remove unnecessary cast when using the cpu_[physical]_memory API exec: Let the cpu_[physical]_memory API use void pointer arguments Remove unnecessary cast when using the address_space API hw/net: Avoid casting non-const pointer, use address_space_write() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-25Merge branch 'exec_rw_const_v4' of https://github.com/philmd/qemu into HEADPaolo Bonzini
2020-02-25Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200225' into ↵Peter Maydell
staging * create a new 'tools' manual, and move the documentation for qemu-img, qemu-nbd, virtfs-proxy-helper, qemu-trace-stap and virtiofsd to it # gpg: Signature made Tue 25 Feb 2020 11:00:16 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-docs-20200225: docs: Move tools documentation to tools manual docs: Move qemu-option-trace.rst.inc to docs/ docs: Create new 'tools' manual Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-25docs: Move tools documentation to tools manualPeter Maydell
Move the following tools documentation files to the new tools manual: docs/interop/qemu-img.rst docs/interop/qemu-nbd.rst docs/interop/virtfs-proxy-helper.rst docs/interop/qemu-trace-stap.rst docs/interop/virtiofsd.rst Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-4-peter.maydell@linaro.org
2020-02-25docs: Move qemu-option-trace.rst.inc to docs/Peter Maydell
The qemu-option-trace.rst.inc file contains a rST documentation fragment which describes trace options common to qemu-nbd and qemu-img. We put this file into interop/, but we'd like to move the qemu-nbd and qemu-img files into the tools/ manual. We could move the .rst.inc file along with them, but we're eventually going to want to use it for the main QEMU binary options documentation too, and that will be in system/. So move qemu-option-trace.rst.inc to the top-level docs/ directory, where all these files can include it via .. include:: ../qemu-option-trace.rst.inc This does have the slight downside that we now need to explicitly tell Make which manuals use this file rather than relying on a wildcard for all .rst.inc in the manual. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-3-peter.maydell@linaro.org
2020-02-25docs: Create new 'tools' manualPeter Maydell
Some of the documentation for QEMU "tools" which are standalone binaries like qemu-img is an awkward fit in our current 5-manual split. We've put it into "interop", but they're not really about interoperability. Create a new top level manual "tools" which will be a better home for this documentation. This commit creates an empty initial manual; we will move the relevant documentation files in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200217155415.30949-2-peter.maydell@linaro.org
2020-02-25Merge tag 'patchew/20200219160953.13771-1-imammedo@redhat.com' of ↵Paolo Bonzini
https://github.com/patchew-project/qemu into HEAD This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory) and consolidates it around hostmem backend. It allows to * resolve conflicts between global -mem-prealloc and hostmem's "policy" option, fixing premature allocation before binding policy is applied * simplify complicated memory allocation routines which had to deal with 2 ways to allocate RAM. * reuse hostmem backends of a choice for main RAM without adding extra CLI options to duplicate hostmem features. A recent case was -mem-shared, to enable vhost-user on targets that don't support hostmem backends [1] (ex: s390) * move RAM allocation from individual boards into generic machine code and provide them with prepared MemoryRegion. * clean up deprecated NUMA features which were tied to the old API (see patches) - "numa: remove deprecated -mem-path fallback to anonymous RAM" - (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types" - (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes" Introduce a new machine.memory-backend property and wrapper code that aliases global -mem-path and -mem-alloc into automatically created hostmem backend properties (provided memory-backend was not set explicitly given by user). A bulk of trivial patches then follow to incrementally convert individual boards to using machine.memory-backend provided MemoryRegion. Board conversion typically involves: * providing MachineClass::default_ram_size and MachineClass::default_ram_id so generic code could create default backend if user didn't explicitly provide memory-backend or -m options * dropping memory_region_allocate_system_memory() call * using convenience MachineState::ram MemoryRegion, which points to MemoryRegion allocated by ram-memdev On top of that for some boards: * missing ram_size checks are added (typically it were boards with fixed ram size) * ram_size fixups are replaced by checks and hard errors, forcing user to provide correct "-m" values instead of ignoring it and continuing running. After all boards are converted, the old API is removed and memory allocation routines are cleaned up.
2020-02-25WHPX: Assigning maintainer for Windows Hypervisor PlatformSunil Muthuswamy
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Message-Id: <SN4PR2101MB0880E245954826FD91C9D67DC0110@SN4PR2101MB0880.namprd21.prod.outlook.com> Reviewed-by: Justin Terry (VM) <juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-25accel/kvm: Check ioctl(KVM_SET_USER_MEMORY_REGION) return valuePhilippe Mathieu-Daudé
kvm_vm_ioctl() can fail, check its return value, and log an error when it failed. This fixes Coverity CID 1412229: Unchecked return value (CHECKED_RETURN) check_return: Calling kvm_vm_ioctl without checking return value Reported-by: Coverity (CID 1412229) Fixes: 235e8982ad3 ("support using KVM_MEM_READONLY flag for regions") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200221163336.2362-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-25target/i386: check for empty register in FXAMPaolo Bonzini
The fxam instruction returns the wrong result after fdecstp or after an underflow. Check fptags to handle this. Reported-by: <chengang@emindsoft.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-25qdev-monitor: Forbid repeated device_delJulia Suvorova
Device unplug can be done asynchronously. Thus, sending the second device_del before the previous unplug is complete may lead to unexpected results. On PCIe devices, this cancels the hot-unplug process. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200220165556.39388-1-jusual@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-25mem-prealloc: optimize large guest startupbauerchen
[desc]: Large memory VM starts slowly when using -mem-prealloc, and there are some areas to optimize in current method; 1、mmap will be used to alloc threads stack during create page clearing threads, and it will attempt mm->mmap_sem for write lock, but clearing threads have hold read lock, this competition will cause threads createion very slow; 2、methods of calcuating pages for per threads is not well;if we use 64 threads to split 160 hugepage,63 threads clear 2page,1 thread clear 34 page,so the entire speed is very slow; to solve the first problem,we add a mutex in thread function,and start all threads when all threads finished createion; and the second problem, we spread remainder to other threads,in situation that 160 hugepage and 64 threads, there are 32 threads clear 3 pages,and 32 threads clear 2 pages. [test]: 320G 84c VM start time can be reduced to 10s 680G 84c VM start time can be reduced to 18s Signed-off-by: bauerchen <bauerchen@tencent.com> Reviewed-by: Pan Rui <ruippan@tencent.com> Reviewed-by: Ivan Ren <ivanren@tencent.com> [Simplify computation of the number of pages per thread. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-25memory: batch allocate ioeventfds[] in address_space_update_ioeventfds()Stefan Hajnoczi
Reallocing the ioeventfds[] array each time an element is added is very expensive as the number of ioeventfds increases. Batch allocate instead to amortize the cost of realloc. This patch reduces Linux guest boot times from 362s to 140s when there are 2 virtio-blk devices with 1 virtqueue and 99 virtio-blk devices with 32 virtqueues. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200218182226.913977-1-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-24Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request This pull request contains a virtio-blk/scsi performance optimization, event loop scalability improvements, and a qtest-based device fuzzing framework. I am including the fuzzing patches because I have reviewed them and Thomas Huth is currently away on leave. # gpg: Signature made Sat 22 Feb 2020 08:50:05 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: (31 commits) fuzz: add documentation to docs/devel/ fuzz: add virtio-scsi fuzz target fuzz: add virtio-net fuzz target fuzz: add i440fx fuzz targets fuzz: add configure flag --enable-fuzzing fuzz: add target/fuzz makefile rules fuzz: add support for qos-assisted fuzz targets fuzz: support for fork-based fuzzing. main: keep rcu_atfork callback enabled for qtest exec: keep ram block across fork when using qtest fuzz: add fuzzer skeleton libqos: move useful qos-test funcs to qos_external libqos: split qos-test and libqos makefile vars libqos: rename i2c_send and i2c_recv qtest: add in-process incoming command handler libqtest: make bufwrite rely on the TransportOps libqtest: add a layer of abstraction to send/recv qtest: add qtest_server_send abstraction fuzz: add FUZZ_TARGET module type module: check module wasn't already initialized ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-22fuzz: add documentation to docs/devel/Alexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-23-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add virtio-scsi fuzz targetAlexander Bulekov
The virtio-scsi fuzz target sets up and fuzzes the available virtio-scsi queues. After an element is placed on a queue, the fuzzer can select whether to perform a kick, or continue adding elements. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-22-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add virtio-net fuzz targetAlexander Bulekov
The virtio-net fuzz target feeds inputs to all three virtio-net virtqueues, and uses forking to avoid leaking state between fuzz runs. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-21-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add i440fx fuzz targetsAlexander Bulekov
These three targets should simply fuzz reads/writes to a couple ioports, but they mostly serve as examples of different ways to write targets. They demonstrate using qtest and qos for fuzzing, as well as using rebooting and forking to reset state, or not resetting it at all. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-20-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add configure flag --enable-fuzzingAlexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-19-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add target/fuzz makefile rulesAlexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200220041118.23264-18-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add support for qos-assisted fuzz targetsAlexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-17-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: support for fork-based fuzzing.Alexander Bulekov
fork() is a simple way to ensure that state does not leak in between fuzzing runs. Unfortunately, the fuzzer mutation engine relies on bitmaps which contain coverage information for each fuzzing run, and these bitmaps should be copied from the child to the parent(where the mutation occurs). These bitmaps are created through compile-time instrumentation and they are not shared with fork()-ed processes, by default. To address this, we create a shared memory region, adjust its size and map it _over_ the counter region. Furthermore, libfuzzer doesn't generally expose the globals that specify the location of the counters/coverage bitmap. As a workaround, we rely on a custom linker script which forces all of the bitmaps we care about to be placed in a contiguous region, which is easy to locate and mmap over. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-16-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22main: keep rcu_atfork callback enabled for qtestAlexander Bulekov
The qtest-based fuzzer makes use of forking to reset-state between tests. Keep the callback enabled, so the call_rcu thread gets created within the child process. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200220041118.23264-15-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22exec: keep ram block across fork when using qtestAlexander Bulekov
Ram blocks were marked MADV_DONTFORK breaking fuzzing-tests which execute each test-input in a forked process. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-14-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add fuzzer skeletonAlexander Bulekov
tests/fuzz/fuzz.c serves as the entry point for the virtual-device fuzzer. Namely, libfuzzer invokes the LLVMFuzzerInitialize and LLVMFuzzerTestOneInput functions, both of which are defined in this file. This change adds a "FuzzTarget" struct, along with the fuzz_add_target function, which should be used to define new fuzz targets. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-13-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22libqos: move useful qos-test funcs to qos_externalAlexander Bulekov
The moved functions are not specific to qos-test and might be useful elsewhere. For example the virtual-device fuzzer makes use of them for qos-assisted fuzz-targets. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-12-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22libqos: split qos-test and libqos makefile varsAlexander Bulekov
Most qos-related objects were specified in the qos-test-obj-y variable. qos-test-obj-y also included qos-test.o which defines a main(). This made it difficult to repurpose qos-test-obj-y to link anything beside tests/qos-test against libqos. This change separates objects that are libqos-specific and ones that are qos-test specific into different variables. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200220041118.23264-11-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22libqos: rename i2c_send and i2c_recvAlexander Bulekov
The names i2c_send and i2c_recv collide with functions defined in hw/i2c/core.c. This causes an error when linking against libqos and softmmu simultaneously (for example when using qtest inproc). Rename the libqos functions to avoid this. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20200220041118.23264-10-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22qtest: add in-process incoming command handlerAlexander Bulekov
The handler allows a qtest client to send commands to the server by directly calling a function, rather than using a file/CharBackend Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-9-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22libqtest: make bufwrite rely on the TransportOpsAlexander Bulekov
When using qtest "in-process" communication, qtest_sendf directly calls a function in the server (qtest.c). Previously, bufwrite used socket_send, which bypasses the TransportOps enabling the call into qtest.c. This change replaces the socket_send calls with ops->send, maintaining the benefits of the direct socket_send call, while adding support for in-process qtest calls. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-8-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22libqtest: add a layer of abstraction to send/recvAlexander Bulekov
This makes it simple to swap the transport functions for qtest commands to and from the qtest client. For example, now it is possible to directly pass qtest commands to a server handler that exists within the same process, without the standard way of writing to a file descriptor. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-7-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22qtest: add qtest_server_send abstractionAlexander Bulekov
qtest_server_send is a function pointer specifying the handler used to transmit data to the qtest client. In the standard configuration, this calls the CharBackend handler, but now it is possible for other types of handlers, e.g direct-function calls if the qtest client and server exist within the same process (inproc) Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20200220041118.23264-6-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22fuzz: add FUZZ_TARGET module typeAlexander Bulekov
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-5-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22module: check module wasn't already initializedAlexander Bulekov
The virtual-device fuzzer must initialize QOM, prior to running vl:qemu_init, so that it can use the qos_graph to identify the arguments required to initialize a guest for libqos-assisted fuzzing. This change prevents errors when vl:qemu_init tries to (re)initialize the previously initialized QOM module. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200220041118.23264-4-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22softmmu: split off vl.c:main() into main.cAlexander Bulekov
A program might rely on functions implemented in vl.c, but implement its own main(). By placing main into a separate source file, there are no complaints about duplicate main()s when linking against vl.o. For example, the virtual-device fuzzer uses a main() provided by libfuzzer, and needs to perform some initialization before running the softmmu initialization. Now, main simply calls three vl.c functions which handle the guest initialization, main loop and cleanup. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-3-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22softmmu: move vl.c to softmmu/Alexander Bulekov
Move vl.c to a separate directory, similar to linux-user/ Update the chechpatch and get_maintainer scripts, since they relied on /vl.c for top_of_tree checks. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-id: 20200220041118.23264-2-alxndr@bu.edu Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22aio-posix: make AioHandler dispatch O(1) with epollStefan Hajnoczi
File descriptor monitoring is O(1) with epoll(7), but aio_dispatch_handlers() still scans all AioHandlers instead of dispatching just those that are ready. This makes aio_poll() O(n) with respect to the total number of registered handlers. Add a local ready_list to aio_poll() so that each nested aio_poll() builds a list of handlers ready to be dispatched. Since file descriptor polling is level-triggered, nested aio_poll() calls also see fds that were ready in the parent but not yet dispatched. This guarantees that nested aio_poll() invocations will dispatch all fds, even those that became ready before the nested invocation. Since only handlers ready to be dispatched are placed onto the ready_list, the new aio_dispatch_ready_handlers() function provides O(1) dispatch. Note that AioContext polling is still O(n) and currently cannot be fully disabled. This still needs to be fixed before aio_poll() is fully O(1). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-6-stefanha@redhat.com [Fix compilation error on macOS where there is no epoll(87). The aio_epoll() prototype was out of date and aio_add_ready_list() needed to be moved outside the ifdef. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22aio-posix: make AioHandler deletion O(1)Stefan Hajnoczi
It is not necessary to scan all AioHandlers for deletion. Keep a list of deleted handlers instead of scanning the full list of all handlers. The AioHandler->deleted field can be dropped. Let's check if the handler has been inserted into the deleted list instead. Add a new QLIST_IS_INSERTED() API for this check. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-5-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22qemu/queue.h: add QLIST_SAFE_REMOVE()Stefan Hajnoczi
QLIST_REMOVE() assumes the element is in a list. It also leaves the element's linked list pointers dangling. Introduce a safe version of QLIST_REMOVE() and convert open-coded instances of this pattern. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22aio-posix: don't pass ns timeout to epoll_wait()Stefan Hajnoczi
Don't pass the nanosecond timeout into epoll_wait(), which expects milliseconds. The epoll_wait() timeout value does not matter if qemu_poll_ns() determined that the poll fd is ready, but passing a value in the wrong units is still ugly. Pass a 0 timeout to epoll_wait() instead. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22aio-posix: fix use after leaving scope in aio_poll()Stefan Hajnoczi
epoll_handler is a stack variable and must not be accessed after it goes out of scope: if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) { AioHandler epoll_handler; ... add_pollfd(&epoll_handler); ret = aio_epoll(ctx, pollfds, npfd, timeout); } ... ... /* if we have any readable fds, dispatch event */ if (ret > 0) { for (i = 0; i < npfd; i++) { nodes[i]->pfd.revents = pollfds[i].revents; } } nodes[0] is &epoll_handler, which has already gone out of scope. There is no need to use pollfds[] for epoll. We don't need an AioHandler for the epoll fd. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200214171712.541358-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22util/async: make bh_aio_poll() O(1)Stefan Hajnoczi
The ctx->first_bh list contains all created BHs, including those that are not scheduled. The list is iterated by the event loop and therefore has O(n) time complexity with respected to the number of created BHs. Rewrite BHs so that only scheduled or deleted BHs are enqueued. Only BHs that actually require action will be iterated. One semantic change is required: qemu_bh_delete() enqueues the BH and therefore invokes aio_notify(). The tests/test-aio.c:test_source_bh_delete_from_cb() test case assumed that g_main_context_iteration(NULL, false) returns false after qemu_bh_delete() but it now returns true for one iteration. Fix up the test case. This patch makes aio_compute_timeout() and aio_bh_poll() drop from a CPU profile reported by perf-top(1). Previously they combined to 9% CPU utilization when AioContext polling is commented out and the guest has 2 virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32 devices. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200221093951.1414693-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-02-22rcu_queue: add QSLIST functionsPaolo Bonzini
QSLIST is the only family of lists for which we do not have RCU-friendly accessors, add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200220103828.24525-1-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:55:46 +0000