summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-06target/arm: Don't switch to target stack early in v7M exception returnPeter Maydell
Currently our M profile exception return code switches to the target stack pointer relatively early in the process, before it tries to pop the exception frame off the stack. This is awkward for v8M for two reasons: * in v8M the process vs main stack pointer is not selected purely by the value of CONTROL.SPSEL, so updating SPSEL and relying on that to switch to the right stack pointer won't work * the stack we should be reading the stack frame from and the stack we will eventually switch to might not be the same if the guest is doing strange things Change our exception return code to use a 'frame pointer' to read the exception frame rather than assuming that we can switch the live stack pointer this early. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1506092407-26985-3-git-send-email-peter.maydell@linaro.org
2017-10-06nvic: Clear the vector arrays and prigroup on resetPeter Maydell
Reset for devices does not include an automatic clear of the device state (unlike CPU state, where most of the state structure is cleared to zero). Add some missing initialization of NVIC state that meant that the device was left in the wrong state if the guest did a warm reset. (In particular, since we were resetting the computed state like s->exception_prio but not all the state it was computed from like s->vectors[x].active, the NVIC wound up in an inconsistent state that could later trigger assertion failures.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1506092407-26985-2-git-send-email-peter.maydell@linaro.org
2017-10-06hw/arm/xlnx-zynqmp: Mark the "xlnx, zynqmp" device with user_creatable = falseThomas Huth
The device uses serial_hds in its realize function and thus can't be used twice. Apart from that, the comma in its name makes it quite hard to use for the user anyway, since a comma is normally used to separate the device name from its properties when using the "-device" parameter or the "device_add" HMP command. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1506441116-16627-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06hw/sd: fix out-of-bounds check for multi block readsMichael Olbrich
The current code checks if the next block exceeds the size of the card. This generates an error while reading the last block of the card. Do the out-of-bounds check when starting to read a new block to fix this. This issue became visible with increased error checking in Linux 4.13. Cc: qemu-stable@nongnu.org Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20170916091611.10241-1-m.olbrich@pengutronix.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06arm: Fix SMC reporting to EL2 when QEMU provides PSCIJan Kiszka
This properly forwards SMC events to EL2 when PSCI is provided by QEMU itself and, thus, ARM_FEATURE_EL3 is off. Found and tested with the Jailhouse hypervisor. Solution based on suggestions by Peter Maydell. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 4f243068-aaea-776f-d18f-f9e05e7be9cd@siemens.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20171006' into stagingPeter Maydell
s390x changes: - support for IDA (indirect addressing in ccws) via ccw data stream - support for extended TOD-Clock (z14 feature) - various fixes and improvements all over the place # gpg: Signature made Fri 06 Oct 2017 10:52:22 BST # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20171006: (33 commits) hw/s390x: Mark the "sclpquiesce" device with user_creatable = false s390x/tcg: initialize machine check queue s390x/sclp: mark sclp-cpu-hotplug as non-usercreatable s390x/sclp: Mark the sclp device with user_creatable = false s390/kvm: make TOD setting failures fatal for migration s390/kvm: Support for get/set of extended TOD-Clock for guest s390x/css: fix css migration compat handling s390x: sort some devices into categories s390x/tcg: make STFL store into the lowcore s390x: introduce and use S390_MAX_CPUS target/s390x: get rid of next_core_id s390x/cpumodel: fix max STFL(E) bit number s390x: raise CPU hotplug irq after really hotplugged MAINTAINERS: use KVM s390x maintainers for kvm-stubs.c and kvm_s390x.h s390x/3270: handle writes of arbitrary length s390x/3270: IDA support for 3270 via CcwDataStream Revert "s390x/ccw: create s390 phb conditionally" s390x/tcg: make idte/ipte use the new _real mmu s390x/tcg: make testblock use the new _real mmu s390x/tcg: make stora(g) use the new _real mmu ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06hw/s390x: Mark the "sclpquiesce" device with user_creatable = falseThomas Huth
The "sclpquiesce" device is just an internal device that should not be created by the user directly. Though it currently does not seem to cause any obvious trouble when the user instantiates an additional device, let's better mark it with user_creatable = false to avoid unexpected behavior, e.g. because the quiesce notifier gets registered multiple times. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1507193105-15627-1-git-send-email-thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: initialize machine check queueCornelia Huck
Just as for external interrupts and I/O interrupts, we need to initialize mchk_index during cpu reset. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/sclp: mark sclp-cpu-hotplug as non-usercreatableCornelia Huck
A TYPE_SCLP_CPU_HOTPLUG device for handling cpu hotplug events is already created by the sclp event facility. Adding a second TYPE_SCLP_CPU_HOTPLUG device via -device sclp-cpu-hotplug creates an ambiguity in raise_irq_cpu_hotplug(), leading to a crash once a cpu is hotplugged. To fix this, disallow creating a sclp-cpu-hotplug device manually. Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/sclp: Mark the sclp device with user_creatable = falseThomas Huth
The "sclp" device is just an internal device that can not be instantiated by the users. If they try to use it, they only get a simple error message: $ qemu-system-s390x -nographic -device sclp qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be handled by this machine Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is a non-pluggable sysbus device, there is really no way that the "sclp" device can be used by the user, so let's set the user_creatable = false accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390/kvm: make TOD setting failures fatal for migrationCollin L. Walling
If we fail to set a proper TOD clock on the target system, this can already result in some problematic cases. We print several warn messages on source and target in that case. If kvm fails to set a nonzero epoch index, then we must ultimately fail the migration as this will result in a giant time leap backwards. This patch lets the migration fail if we can not set the guest time on the target. On failure the guest will resume normally on the original host machine. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split failure change from epoch index change, minor fixups] Message-Id: <20171004105751.24655-3-borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390/kvm: Support for get/set of extended TOD-Clock for guestCollin L. Walling
Provides an interface for getting and setting the guest's extended TOD-Clock via a single ioctl to kvm. If the ioctl fails because it is not support by kvm, then we fall back to the old style of retrieving the clock via two ioctls. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split failure change from epoch index change] Message-Id: <20171004105751.24655-2-borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> [some cosmetic fixes]
2017-10-06s390x/css: fix css migration compat handlingHalil Pasic
Commit e996583eb3 ("s390x/css: activate ChannelSubSys migration", 2017-07-11) was supposed to enable css migration for virtio-ccw machines starting 2.10, but it ended up effectively enabling it only for 2.10 as the registration of the appropriate VMStateDescription happens in ccw_machine_2_10_instance_options which does not get called for machines more recent than 2_10. Let us move the corresponding chunk of code (which conditionally enables the migration based on the value of the corresponding class property) to ccw_init, which is called for each virtio-ccw machine instance. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reported-by: Thomas Huth <thuth@redhat.com> Message-Id: <20171004110109.16525-1-pasic@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: sort some devices into categoriesCornelia Huck
Add missing categorizations for some s390x devices: - zpci device -> misc - 3270 -> display - vfio-ccw -> misc Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make STFL store into the lowcoreDavid Hildenbrand
Using virtual memory access is wrong and will soon include low-address protection checks, which is to be bypassed for STFL. STFL is a privileged instruction and using LowCore requires !CONFIG_USER_ONLY, so add the ifdef and move the declaration to the right place. This was originally part of a bigger STFL(E) refactoring. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170927170027.8539-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: introduce and use S390_MAX_CPUSDavid Hildenbrand
Will be handy in the future. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-6-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06target/s390x: get rid of next_core_idDavid Hildenbrand
core_id is not needed by linux-user, as the core_id a.k.a. CPU address is only accessible from kernel space. Therefore, drop next_core_id and make cpu_index get autoassigned again for linux-user. While at it, shield core_id and cpuid completely from linux-user. cpuid can also only be queried from kernel space. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-5-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/cpumodel: fix max STFL(E) bit numberDavid Hildenbrand
Not that it would matter in the near future, but it is actually 2048 bytes, therefore 16384 possible bits. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-4-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: raise CPU hotplug irq after really hotpluggedDavid Hildenbrand
Let's move it into the machine, so we trigger the IRQ after setting ms->possible_cpus (which SCLP uses to construct the list of online CPUs). This also fixes a problem reported by Thomas Huth, whereby qemu can be crashed using the none machine qemu-s390x-softmmu -M none -monitor stdio -> device_add qemu-s390-cpu Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06MAINTAINERS: use KVM s390x maintainers for kvm-stubs.c and kvm_s390x.hDavid Hildenbrand
Forgot it when factoring code out into these files. This is 100% s390x KVM material. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170928134609.16985-2-david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/3270: handle writes of arbitrary lengthHalil Pasic
The problem is, that the current implementation places unrealistic and arbitrary constraints on the length of writes to the device (that is the outbound requests), by asserting ccw.count being such that that even the worst case escaped payload will fit an more or less arbitrary sized buffer. Actually on protocol level there is nothing to justify such a limitation. Another strange thing is the return value which more or less reflects the size (written) after escaping instead of before escaping. This is strange, because this return value is used to calculate SCSW.count. Let us teach 3270 how to deal with arbitrary long writes. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reported-by: Jason J . Herne <jjherne@linux.vnet.ibm.com> Tested-by: Jason J . Herne <jjherne@linux.vnet.ibm.com> Message-Id: <20170920172314.102710-3-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/3270: IDA support for 3270 via CcwDataStreamHalil Pasic
Let us convert the 3270 code so it uses the recently introduced CcwDataStream abstraction instead of blindly assuming direct data access. This patch does not change behavior beyond introducing IDA support: for direct data access CCWs everything stays as-is. (If there are bugs, they are also preserved). Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06Revert "s390x/ccw: create s390 phb conditionally"Christian Borntraeger
This reverts commit d32bd032d8fde41281aae34c16a4aa97e9acfeac. Turns out that old QEMUs always created a pci host bridge and for many CPU models the migration from old QEMUs to new QEMUs will fail with qemu-system-s390x: Unknown savevm section or instance 'PCIBUS' 0 qemu-system-s390x: load of migration failed: Invalid argument As a quick fix we will revert the commit and always create the pci host bridge. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [fixed revert to keep the comment fixup, added a comment in the code] Cc: Cornelia Huck <cohuck@redhat.com> Cc: David Hildenbrand <david@redhat.com> Message-Id: <20170928131831.81393-1-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make idte/ipte use the new _real mmuDavid Hildenbrand
We don't wrap addresses in the mmu for the _real case, therefore the behavior should be unchanged. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-7-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make testblock use the new _real mmuDavid Hildenbrand
Low address protection checks will be moved into the mmu later. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-6-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make stora(g) use the new _real mmuDavid Hildenbrand
As we properly handle the return address now, we can drop potential_page_fault(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-5-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: make lura(g) use the new _real mmu.David Hildenbrand
Looks like, lurag was not loading 64bit but only 32bit. As we properly handle the return address now, we can drop potential_page_fault(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: add MMU for real addressesDavid Hildenbrand
This makes it easy to access real addresses (prefix) and in addition checks for valid memory addresses, which is missing when using e.g. stl_phys(). We can later reuse it to implement low address protection checks (then we might even decide to introduce yet another MMU for absolute addresses, just for handling storage keys and low address protection). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-3-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: fix checking for invalid memory checkDavid Hildenbrand
It should have been a >=, but let's directly perform a proper access check to also be able to deal with hotplugged memory later. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170926183318.12995-2-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: support ccw IDAHalil Pasic
Let's add indirect data addressing support for our virtual channel subsystem. This implementation does not bother with any kind of prefetching. We simply step through the IDAL on demand. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-6-pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06390x/css: introduce maximum data address checkingHalil Pasic
The architecture mandates the addresses to be accessed on the first indirection level (that is, the data addresses without IDA, and the (M)IDAW addresses with (M)IDA) to be checked against an CCW format dependent limit maximum address. If a violation is detected, the storage access is not to be performed and a channel program check needs to be generated. As of today, we fail to do this check. Let us stick even closer to the architecture specification. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06virtio-ccw: use ccw data streamHalil Pasic
Replace direct access which implicitly assumes no IDA or MIDA with the new ccw data stream interface which should cope with these transparently in the future. Note that checking the return code for ccw_dstream_* will be done in a follow-on patch. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-4-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: use ccw data streamHalil Pasic
Replace direct access which implicitly assumes no IDA or MIDA with the new ccw data stream interface which should cope with these transparently in the future. Note that checking the return code for ccw_dstream_* will be done in a follow-on patch. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: introduce css data streamHalil Pasic
This is a preparation for introducing handling for indirect data addressing and modified indirect data addressing (CCW). Here we introduce an interface which should make the addressing scheme transparent for the client code. Here we implement only the basic scheme (no IDA or MIDA). Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/kvm: fix and cleanup storing CPU statusDavid Hildenbrand
env->psa is a 64bit value, while we copy 4 bytes into the save area, resulting always in 0 getting stored. Let's try to reduce such errors by using a proper structure. While at it, use correct cpu->be conversion (and get_psw_mask()), as we will be reusing this code for TCG soon. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170922140338.6068-1-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: use generic cpu_model parsingIgor Mammedov
Define default CPU type in generic way in machine class_init and let common machine code handle cpu_model parsing. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: add basic MSA featuresDavid Hildenbrand
The STFLE bits for the MSA (extension) facilities simply indicate that the respective instructions can be executed. The QUERY subfunction can then be used to identify which features exactly are available. Availability of subfunctions can also vary on real hardware. For now, we simply implement a CPU model without any available subfunctions except QUERY (which is always around). As all MSA functions behave quite similarly, we can use one translation handler for now. Prepare the code for implementation of actual subfunctions. At least MSA is helpful for now, as older Linux kernels require this facility when compiled for a z9 model. Allow to enable the facilities for the qemu cpu model. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: move wrap_address() to internal.hDavid Hildenbrand
We want to use it in another file. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/tcg: implement spm (SET PROGRAM MASK)David Hildenbrand
Missing and is used inside Linux in the context of CPACF. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170920153016.3858-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-05Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Thu 05 Oct 2017 15:25:21 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: checkpatch: fix incompatibility with old perl Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20171005' into ↵Peter Maydell
staging HMP pull 2017-10-05 # gpg: Signature made Thu 05 Oct 2017 11:50:13 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20171005: hmp-commands-info: Change "@findex FOO" to "@findex info FOO" hmp-commands-info: Move Texinfo stanzas to conventional place hmp-commands-info: Fix "info rocker-FOO" misspellings hmp: Fix unknown command for subtable hmp: Missing handle_errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05Merge remote-tracking branch 'remotes/kraxel/tags/usb-20171005-pull-request' ↵Peter Maydell
into staging usb bugfixes. # gpg: Signature made Thu 05 Oct 2017 10:04:15 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20171005-pull-request: usb: fix host-stub.c build race usb: Use angle brackets for cacard include directive usb: fix libusb config variable name. hw/usb/bus: Remove bad object_unparent() from usb_try_create_simple() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05checkpatch: fix incompatibility with old perlVladimir Sementsov-Ogievskiy
Do not use '/r' modifier which was introduced in perl 5.14. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Fixes: 3e5875afc0f ("checkpatch: check trace-events code style") Tested-by: Alex Williamson <alex.williamson@redhat.com> Message-id: 20171004154420.34596-1-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-05Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2017-10-04-1' ↵Peter Maydell
into staging Merge qio 2017/10/04 v1 # gpg: Signature made Wed 04 Oct 2017 13:23:04 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2017-10-04-1: io: add trace events for websockets frame handling io: Attempt to send websocket close messages to client io: Reply to ping frames io: Ignore websocket PING and PONG frames io: Allow empty websocket payload io: Add support for fragmented websocket binary frames io: Small updates in preparation for websocket changes ui: Always remove an old VNC channel watch before adding a new one io: use case insensitive check for Connection & Upgrade websock headers io: include full error message in websocket handshake trace io: send proper HTTP response for websocket errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05Merge remote-tracking branch 'remotes/awilliam/tags/vfio-updates-20171003.0' ↵Peter Maydell
into staging VFIO updates 2017-10-03 - NVIDIA GPUDirect Cliques experimental support (Alex Williamson) # gpg: Signature made Tue 03 Oct 2017 22:28:43 BST # gpg: using RSA key 0x239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-updates-20171003.0: vfio/pci: Add NVIDIA GPUDirect Cliques support vfio/pci: Add virtual capabilities quirk infrastructure vfio/pci: Do not unwind on error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 03 Oct 2017 19:53:34 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: aio: fix assert when remove poll during destroy iothread: delay the context release to finalize iothread: export iothread_stop() iothread: provide helpers for internal use qom: provide root container for internal objs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05hmp-commands-info: Change "@findex FOO" to "@findex info FOO"Markus Armbruster
qemu-doc has the monitor commands in the "Function Index". The "info FOO" are listed as "FOO" there. List them as "info FOO" instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-4-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05hmp-commands-info: Move Texinfo stanzas to conventional placeMarkus Armbruster
A command's STEXI..ETEXI stanza follows the command's initializer. Two commands got them backwards. Correct that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-3-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05hmp-commands-info: Fix "info rocker-FOO" misspellingsMarkus Armbruster
Screwed up in commit da76ee7. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002134538.23332-2-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05usb: fix host-stub.c build raceGerd Hoffmann
Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20171004125210.7817-1-kraxel@redhat.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 13:47:22 +0000