summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-20qapi: update the qobject visitor to use QNUM_U64Marc-André Lureau
Switch to use QNum/uint where appropriate to remove i64 limitation. The input visitor will cast i64 input to u64 for compatibility reasons (existing json QMP client already use negative i64 for large u64, and expect an implicit cast in qemu). Note: before the patch, uint64_t values above INT64_MAX are sent over json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the patch, they are sent unmodified. Clearly a bug fix, but we have to consider compatibility issues anyway. libvirt should cope fine, because its parsing of unsigned integers accepts negative values modulo 2^64. There's hope that other clients will, too. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com> [check_native_list() tweaked for consistency with signed case] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20json: learn to parse uint64 numbersMarc-André Lureau
Switch strtoll() usage to qemu_strtoi64() helper while at it. Add a few tests for large numbers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-11-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20qnum: add uint typeMarc-André Lureau
In order to store integer values between INT64_MAX and UINT64_MAX, add a uint64_t internal representation. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-10-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20tests: remove /{qnum, qlist, dict}/destroy testMarc-André Lureau
The tests aren't really useful, or already covered by other simple tests. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-9-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20qapi: Remove visit_start_alternate() parameter promote_intMarc-André Lureau
Before the previous commit, parameter promote_int = true made visit_start_alternate() with an input visitor avoid QTYPE_QINT variants and create QTYPE_QFLOAT variants instead. This was used where QTYPE_QINT variants were invalid. The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering promote_int useless and unused. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20qapi: merge QInt and QFloat in QNumMarc-André Lureau
We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19qapi: Clean up qobject_input_type_number() control flowMarc-André Lureau
Use the more common pattern to error out. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19tests: add more int/number ranges checksMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-5-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [test_visitor_in_uint() tightened slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19tests: Remove test cases for alternates of 'number' and 'int'Marc-André Lureau
Alternates with both a 'number' and an 'int' branch will become invalid when the next patch merges of QFloat and QInt into QNum. More sophisticated alternate code could keep them valid, but since we have no users outside tests, simply drop the tests. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-4-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19object: fix potential leak in gettersMarc-André Lureau
If the property is not of the requested type, the getters will leak a QObject. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-3-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-19qdev: remove PropertyInfo.qtype fieldMarc-André Lureau
Remove dependency on qapi qtype, replace a field by a few PropertyInfo callbacks to set the default value type (introduced in commit 4f2d3d7). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-2-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-15Merge remote-tracking branch 'remotes/rth/tags/pull-s390-20170613' into stagingPeter Maydell
Queued s390 patches # gpg: Signature made Tue 13 Jun 2017 21:22:41 BST # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-s390-20170613: s390x/cpumodel: wire up cpu type + id for TCG target/s390x: rework PGM interrupt psw.addr handling target/s390x: correctly indicate PER nullification Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-15Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170614' ↵Peter Maydell
into staging migration/next for 20170614 # gpg: Signature made Wed 14 Jun 2017 11:16:21 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170614: migration: Don't create decompression threads if not enabled migration: Test for disabled features on reception migration: Remove unneeded includes migration: fix incorrect enable return path migration: Fix compilation with older compilers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-14migration: Don't create decompression threads if not enabledJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- I removed the [HACK] part because previous patch just check that compression pages are not received.
2017-06-14migration: Test for disabled features on receptionJuan Quintela
Right now, if we receive a compressed page while this features are disabled, Bad Things (TM) can happen. Just add a test for them. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- I had XBZRLE here also, but it don't need extra resources on destination, only on source. Additionally libvirt don't enable it on destination, so don't put it here. - initialize invalid_flags at declaration time. - remove extra space (peter)
2017-06-14migration: Remove unneeded includesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-14migration: fix incorrect enable return pathPeter Xu
0425dc9 is actually v1 of that patch, but it was accidentally merged (while there was a v2). That will cause problem when we try to migrate to some old QEMUs when return path is not really there. Let's fix it, then squashing this patch with 0425dc9 will be exactly patch content of v2. Fixes: 0425dc9 ("migration: isolate return path on src") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-14migration: Fix compilation with older compilersJuan Quintela
That typedefs are needed on both files. New compilers (F25 where I work) don't complain about repeating a typedef. But older ones complain. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2017-06-13s390x/cpumodel: wire up cpu type + id for TCGDavid Hildenbrand
Let's properly expose the CPU type (machine-type number) via "STORE CPU ID" and "STORE SUBSYSTEM INFORMATION". As TCG emulates basic mode, the CPU identification number has the format "Annnnn", whereby A is the CPU address, and n are parts of the CPU serial number (0 for us for now). A specification exception will be injected if the address is not aligned to a double word. Low address protection will not be checked as we're missing some more general support for that. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170609133426.11447-3-david@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-13target/s390x: rework PGM interrupt psw.addr handlingDavid Hildenbrand
We can tell from the program interrupt code, whether a program interrupt has to forward the address in the PGM new PSW (suppressing/terminated/completed) to point at the next instruction, or if it is nullifying and the PSW address does not have to be incremented. So let's not modify the PSW address outside of the injection path and handle this internally. We just have to handle instruction length auto detection if no valid instruction length can be provided. This should fix various program interrupt injection paths, where the PSW was not properly forwarded. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170609142156.18767-3-david@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-13target/s390x: correctly indicate PER nullificationDavid Hildenbrand
Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170609142156.18767-2-david@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-13Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20170613' into staging target-arm queue: * vITS: Support save/restore * timer/aspeed: Fix timer enablement when reload is not set * aspped: add temperature sensor device * timer.h: Provide better monotonic time on ARM hosts * exynos4210: various cleanups * exynos4210: support system poweroff # gpg: Signature made Tue 13 Jun 2017 15:05:49 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20170613: hw/intc/arm_gicv3_its: Allow save/restore hw/intc/arm_gicv3_kvm: Implement pending table save hw/intc/arm_gicv3_its: Implement state save/restore kvm-all: Pass an error object to kvm_device_access timer/aspeed: fix timer enablement when a reload is not set aspeed: add a temp sensor device on I2C bus 3 hw/misc: add a TMP42{1, 2, 3} device model timer.h: Provide better monotonic time hw/misc/exynos4210_pmu: Add support for system poweroff hw/intc/exynos4210_gic: Constify array of combiner interrupts hw/arm/exynos: Use type define instead of hard-coded a9mpcore_priv string hw/arm/exynos: Declare local variables in some order hw/arm/exynos: Move DRAM initialization next boards hw/timer/exynos4210_mct: Remove unused defines hw/timer/exynos4210_mct: Cleanup indentation and empty new lines hw/timer/exynos4210_mct: Fix checkpatch style errors hw/intc/exynos4210_gic: Use more meaningful name for local variable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/intc/arm_gicv3_its: Allow save/restoreEric Auger
We change the restoration priority of both the GICv3 and ITS. The GICv3 must be restored before the ITS and the ITS needs to be restored before PCIe devices since it translates their MSI transactions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/intc/arm_gicv3_kvm: Implement pending table saveEric Auger
This patch adds the flush of the LPI pending bits into the redistributor pending tables. This happens on VM stop. There is no explicit restore as the tables are implicitly sync'ed on ITS table restore and on LPI enable at redistributor level. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1497023553-18411-4-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/intc/arm_gicv3_its: Implement state save/restoreEric Auger
We need to handle both registers and ITS tables. While register handling is standard, ITS table handling is more challenging since the kernel API is devised so that the tables are flushed into guest RAM and not in vmstate buffers. Flushing the ITS tables on device pre_save() is too late since the guest RAM is already saved at this point. Table flushing needs to happen when we are sure the vcpus are stopped and before the last dirty page saving. The right point is RUN_STATE_FINISH_MIGRATE but sometimes the VM gets stopped before migration launch so let's simply flush the tables each time the VM gets stopped. For regular ITS registers we just can use vmstate pre_save() and post_load() callbacks. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13kvm-all: Pass an error object to kvm_device_accessEric Auger
In some circumstances, we don't want to abort if the kvm_device_access fails. This will be the case during ITS migration, in case the ITS table save/restore fails because the guest did not program the vITS correctly. So let's pass an error object to the function and return the ioctl value. New callers will be able to make a decision upon this returned value. Existing callers pass &error_abort which will cause the function to abort on failure. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 1497023553-18411-2-git-send-email-eric.auger@redhat.com [PMM: wrapped long line] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13timer/aspeed: fix timer enablement when a reload is not setCédric Le Goater
When a timer is enabled before a reload value is set, the controller waits for a reload value to be set before starting decrementing. This fix tries to cover that case by changing the timer expiry only when a reload value is valid. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1496739312-32304-1-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13aspeed: add a temp sensor device on I2C bus 3Cédric Le Goater
Temperatures can be changed from the monitor with : (qemu) qom-set /machine/unattached/device[2] temperature0 12000 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1496739230-32109-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/misc: add a TMP42{1, 2, 3} device modelCédric Le Goater
Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13timer.h: Provide better monotonic timePranith Kumar
Tested and confirmed that the stretch i386 debian qcow2 image on a raspberry pi 2 works. Fixes: LP#: 893208 <https://bugs.launchpad.net/qemu/+bug/893208/> Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170418191817.10430-1-bobby.prani@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/misc/exynos4210_pmu: Add support for system poweroffKrzysztof Kozlowski
On all Exynos-based boards, the system powers down itself by driving PS_HOLD signal low - eight bit in PS_HOLD_CONTROL register of PMU. Handle writing to respective PMU register to fix power off failure: reboot: Power down Unable to poweroff system shutdown: 31 output lines suppressed due to ratelimiting Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: shutdown Not tainted 4.11.0-rc8 #846 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c031050c>] (unwind_backtrace) from [<c030ba6c>] (show_stack+0x10/0x14) [<c030ba6c>] (show_stack) from [<c05b2800>] (dump_stack+0x88/0x9c) [<c05b2800>] (dump_stack) from [<c03d3140>] (panic+0xdc/0x268) [<c03d3140>] (panic) from [<c0343614>] (do_exit+0xa90/0xab4) [<c0343614>] (do_exit) from [<c035f2dc>] (SyS_reboot+0x164/0x1d0) [<c035f2dc>] (SyS_reboot) from [<c0307c80>] (ret_fast_syscall+0x0/0x3c) Additionally the initial value of PS_HOLD has to be changed because recent Linux kernel (v4.12-rc1) uses regmap cache for this access. When the register is kept at reset value, the kernel will not issue a write to it. Usually the bootloader sets the eight bit of PS_HOLD high so mimic its existence here. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/intc/exynos4210_gic: Constify array of combiner interruptsKrzysztof Kozlowski
The static array of interrupt combiner mappings is not modified so it can be made const for code safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/arm/exynos: Use type define instead of hard-coded a9mpcore_priv stringKrzysztof Kozlowski
Use a define for a9mpcore_priv device type name instead of hard-coded string. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/arm/exynos: Declare local variables in some orderKrzysztof Kozlowski
Bring some more readability by declaring local function variables: first initialized ones and then the rest (with reversed-christmas-tree order). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/arm/exynos: Move DRAM initialization next boardsKrzysztof Kozlowski
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization from exynos4210.c to exynos4_boards.c because DRAM is board specific, not SoC. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/timer/exynos4210_mct: Remove unused definesKrzysztof Kozlowski
Remove defines not used anywhere. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/timer/exynos4210_mct: Cleanup indentation and empty new linesKrzysztof Kozlowski
Statements under 'case' were in some places wrongly indented bringing confusion and making the code less readable. Remove also few unneeded blank lines. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/timer/exynos4210_mct: Fix checkpatch style errorsKrzysztof Kozlowski
Fix checkpatch errors: 1. ERROR: spaces required around that '+' (ctx:VxV) 2. ERROR: spaces required around that '&' (ctx:VxV) No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/intc/exynos4210_gic: Use more meaningful name for local variableKrzysztof Kozlowski
There are to SysBusDevice variables in exynos4210_gic_realize() function: one for the device itself and second for arm_gic device. Add a prefix "gic" to the second one so it will be easier to understand the code. While at it, put local uninitialized 'i' variable at the end, next to other uninitialized ones. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Tue 13 Jun 2017 14:35:25 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: monitor: resurrect handle_qmp_command trace event monitor: add handle_hmp_command trace event Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13monitor: resurrect handle_qmp_command trace eventStefan Hajnoczi
Commit 104fc3027960dd2aa9d310936a6cb201c60e1088 ("qmp: Drop duplicated QMP command object checks") removed the call to trace_handle_qmp_command() while eliminating code duplication. This patch brings the trace event back so QEMU-internal trace events can be correlated with the QMP commands that caused them. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170605104216.22429-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-13monitor: add handle_hmp_command trace eventStefan Hajnoczi
It is often useful to correlate QEMU-internal events with monitor commands that caused them. Trace the full HMP command being executed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170605104216.22429-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-13Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170613' ↵Peter Maydell
into staging migration/next for 20170613 # gpg: Signature made Tue 13 Jun 2017 10:01:45 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170613: migration: Move migration.h to migration/ migration: Move remaining exported functions to migration/misc.h migration: create global_state.c migration: ram_control_* are implemented in qemu_file migration: Commands are only used inside migration.c migration: Move constants to savevm.h migration: Move dump_vmsate_json_to_file() to misc.h migration: Split registration functions from vmstate.h migration: Move self_announce_delay() to misc.h migration: Remove MigrationState from migration_channel_incomming() ram: Now POSTCOPY_ACTIVE is the same that STATUS_ACTIVE ram: Print block stats also in the complete case migration: Don't try to set *errp directly migration: isolate return path on src Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell
# gpg: Signature made Fri 09 Jun 2017 13:41:59 BST # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: block/gluster.c: Handle qdict_array_entries() failure Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170609' ↵Peter Maydell
into staging ppc patch queue 2017-06-09 This batch contains more patches to rework the pseries machine hotplug infrastructure, plus an assorted batch of bugfixes. It contains a start on fixes to restore migration from older machine types on older versions which was broken by some xics changes. There are still a few missing pieces here, though. # gpg: Signature made Fri 09 Jun 2017 06:26:03 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170609: Revert "spapr: fix memory hot-unplugging" xics: drop ICPStateClass::cpu_setup() handler xics: setup cpu at realize time xics: pass appropriate types to realize() handlers. xics: introduce macros for ICP/ICS link properties hw/cpu: core.c can be compiled as common object hw/ppc/spapr: Adjust firmware name for PCI bridges xics: add reset() handler to ICPStateClass pnv_core: drop reference on ICPState object during CPU realization spapr: Rework DRC name handling spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers spapr: Change DRC attach & detach methods to functions spapr: Clean up handling of DR-indicator spapr: Clean up RTAS set-indicator spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state() spapr: Clean up DR entity sense handling pseries: Correct panic behaviour for pseries machine type spapr: fix memory leak in spapr_memory_pre_plug() target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok() target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, vhost: fixes Some fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 08 Jun 2017 20:04:24 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: hw/pcie: fix the generic pcie root port to support migration nvdimm acpi: fix region format interface code vhost-user-bridge: fix iov_restore_front() warning Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13migration: Move migration.h to migration/Juan Quintela
Nothing uses it outside of migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Move remaining exported functions to migration/misc.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: create global_state.cJuan Quintela
It don't belong anywhere else, just the global state where everybody can stick other things. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: ram_control_* are implemented in qemu_fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 21:56:56 +0000