summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-17ppc/pnv: Drop PnvPsiClass::chip_typeGreg Kurz
It isn't used anymore. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157623838530.360005.15470128760871845396.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce PnvPsiClass::compatGreg Kurz
The Processor Service Interface (PSI) model has a chip_type class level attribute, which is used to generate the content of the "compatible" DT property according to the CPU type. Since the PSI model already has specialized classes for each supported CPU type, it seems cleaner to achieve this with QOM. Provide the content of the "compatible" property with a new class level attribute. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157623837974.360005.14706607446188964477.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Drop useless extern annotation for functionsGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <157623837421.360005.412120366652768311.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Fix OCC common area region mappingCédric Le Goater
The OCC common area is mapped at a unique address on the system and each OCC is assigned a segment to expose its sensor data : ------------------------------------------------------------------------- | Start (Offset from | End | Size |Description | | BAR2 base address) | | | | ------------------------------------------------------------------------- | 0x00580000 | 0x005A57FF |150kB |OCC 0 Sensor Data Block| | 0x005A5800 | 0x005CAFFF |150kB |OCC 1 Sensor Data Block| | : | : | : | : | | 0x00686800 | 0x006ABFFF |150kB |OCC 7 Sensor Data Block| | 0x006AC000 | 0x006FFFFF |336kB |Reserved | ------------------------------------------------------------------------- Maximum size is 1.5MB. We could define a "OCC common area" memory region at the machine level and sub regions for each OCC. But it adds some extra complexity to the models. Fix the current layout with a simpler model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191211082912.2625-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce PBA registersCédric Le Goater
The PBA bridge unit (Power Bus Access) connects the OCC (On Chip Controller) to the Power bus and System Memory. The PBA is used to gather sensor data, for power management, for sleep states, for initial boot, among other things. The PBA logic provides a set of four registers PowerBus Access Base Address Registers (PBABAR0..3) which map the OCC address space to the PowerBus space. These registers are setup by the initial FW and define the PowerBus Range of system memory that can be accessed by PBA. The current modeling of the PBABAR registers is done under the common XSCOM handlers. We introduce a specific XSCOM regions for these registers and fix : - BAR sizes and BAR masks - The mapping of the OCC common area. It is common to all chips and should be mapped once. We will address per-OCC area in the next change. - OCC common area is in BAR 3 on P8 Inspired by previous work of Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191211082912.2625-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Make PnvXScomInterface an incomplete typeGreg Kurz
PnvXScomInterface is an interface instance. It should never be dereferenced. Drop the dummy type definition for extra safety, which is the common practice with QOM interfaces. While here also convert the bogus OBJECT_CHECK() to INTERFACE_CHECK(). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157608025541.186670.1577861507610404326.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: populate the DT with realized XSCOM devicesCédric Le Goater
Some devices could be initialized in the instance_init handler but not realized for configuration reasons. Nodes should not be added in the DT for such devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191210135845.19773-3-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Loop on the whole hierarchy to populate the DT with the XSCOM nodesCédric Le Goater
Some PnvXScomInterface objects lie a bit deeper (PnvPBCQState) than the first layer, so we need to loop on the whole object hierarchy to catch them. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191210135845.19773-2-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> [dwg: Corrected error in comment] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Add SPR TBU40Suraj Jitindar Singh
The spr TBU40 is used to set the upper 40 bits of the timebase register, present on POWER5+ and later processors. This register can only be written by the hypervisor, and cannot be read. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Add SPR ASDRSuraj Jitindar Singh
The Access Segment Descriptor Register (ASDR) provides information about the storage element when taking a hypervisor storage interrupt. When performing nested radix address translation, this is normally the guest real address. This register is present on POWER9 processors and later. Implement the ADSR, note read and write access is limited to the hypervisor. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Work [S]PURR implementation and add HV supportSuraj Jitindar Singh
The Processor Utilisation of Resources Register (PURR) and Scaled Processor Utilisation of Resources Register (SPURR) provide an estimate of the resources used by the thread, present on POWER7 and later processors. Currently the [S]PURR registers simply count at the rate of the timebase. Preserve this behaviour but rework the implementation to store an offset like the timebase rather than doing the calculation manually. Also allow hypervisor write access to the register along with the currently available read access. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Implement the VTB for HV accessSuraj Jitindar Singh
The virtual timebase register (VTB) is a 64-bit register which increments at the same rate as the timebase register, present on POWER8 and later processors. The register is able to be read/written by the hypervisor and read by the supervisor. All other accesses are illegal. Currently the VTB is just an alias for the timebase (TB) register. Implement the VTB so that is can be read/written independent of the TB. Make use of the existing method for accessing timebase facilities where by the compensation is stored and used to compute the value on reads/is updated on writes. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: add a LPC Controller model for POWER10Cédric Le Goater
Same a POWER9, only the MMIO window changes. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: add a PSI bridge model for POWER10Cédric Le Goater
The POWER10 PSIHB controller is very similar to the one on POWER9. We should probably introduce a common PnvPsiXive object. The ESB page size should be changed to 64k when P10 support is ready. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/psi: cleanup definitionsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce a POWER10 PnvChip and a powernv10 machineCédric Le Goater
This is an empty shell with the XSCOM bus and cores. The chip controllers will come later. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Add POWER10 DD1.0 model informationCédric Le Goater
This includes in QEMU a new CPU model for the POWER10 processor with the same capabilities of a POWER9 process. The model will be extended when support is completed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Make PPCVirtualHypervisor an incomplete typeGreg Kurz
PPCVirtualHypervisor is an interface instance. It should never be dereferenced. Drop the dummy type definition for extra safety, which is the common practice with QOM interfaces. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157589808041.21182.18121655959115011353.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Ignore the CPU_INTERRUPT_EXITTB interrupt with KVMGreg Kurz
This only makes sense with an emulated CPU. Don't set the bit in CPUState::interrupt_request when using KVM to avoid confusions. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548863423.3650476.16424649423510075159.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Don't use CPUPPCState::irq_input_state with modern Book3s CPU modelsGreg Kurz
The power7_set_irq() and power9_set_irq() functions set this but it is never used actually. Modern Book3s compatible CPUs are only supported by the pnv and spapr machines. They have an interrupt controller, XICS for POWER7/8 and XIVE for POWER9, whose models don't require to track IRQ input states at the CPU level. Drop these lines to avoid confusion. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548862861.3650476.16622818876928044450.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17xics: Don't deassert outputsGreg Kurz
The correct way to do this is to deassert the input pins on the CPU side. This is the case since a previous change. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548862298.3650476.1228720391270249433.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Deassert the external interrupt pin in KVM on resetGreg Kurz
When a CPU is reset, QEMU makes sure no interrupt is pending by clearing CPUPPCstate::pending_interrupts in ppc_cpu_reset(). In the case of a complete machine emulation, eg. a sPAPR machine, an external interrupt request could still be pending in KVM though, eg. an IPI. It will be eventually presented to the guest, which is supposed to acknowledge it at the interrupt controller. If the interrupt controller is emulated in QEMU, either XICS or XIVE, ppc_set_irq() won't deassert the external interrupt pin in KVM since it isn't pending anymore for QEMU. When the vCPU re-enters the guest, the interrupt request is still pending and the vCPU will try again to acknowledge it. This causes an infinite loop and eventually hangs the guest. The code has been broken since the beginning. The issue wasn't hit before because accel=kvm,kernel-irqchip=off is an awkward setup that never got used until recently with the LC92x IBM systems (aka, Boston). Add a ppc_irq_reset() function to do the necessary cleanup, ie. deassert the IRQ pins of the CPU in QEMU and most importantly the external interrupt pin for this vCPU in KVM. Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548861740.3650476.16879693165328764758.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17spapr: Simplify ovec diffDavid Gibson
spapr_ovec_diff(ov, old, new) has somewhat complex semantics. ov is set to those bits which are in new but not old, and it returns as a boolean whether or not there are any bits in old but not new. It turns out that both callers only care about the second, not the first. This is basically equivalent to a bitmap subset operation, which is easier to understand and implement. So replace spapr_ovec_diff() with spapr_ovec_subset(). Cc: Mike Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cedric Le Goater <clg@fr.ibm.com>
2019-12-17spapr: Fold h_cas_compose_response() into h_client_architecture_support()David Gibson
spapr_h_cas_compose_response() handles the last piece of the PAPR feature negotiation process invoked via the ibm,client-architecture-support OF call. Its only caller is h_client_architecture_support() which handles most of the rest of that process. I believe it was placed in a separate file originally to handle some fiddly dependencies between functions, but mostly it's just confusing to have the CAS process split into two pieces like this. Now that compose response is simplified (by just generating the whole device tree anew), it's cleaner to just fold it into h_client_architecture_support(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cedric Le Goater <clg@fr.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-12-17spapr: Improve handling of fdt buffer sizeDavid Gibson
Previously, spapr_build_fdt() constructed the device tree in a fixed buffer of size FDT_MAX_SIZE. This is a bit inflexible, but more importantly it's awkward for the case where we use it during CAS. In that case the guest firmware supplies a buffer and we have to awkwardly check that what we generated fits into it afterwards, after doing a lot of size checks during spapr_build_fdt(). Simplify this by having spapr_build_fdt() take a 'space' parameter. For the CAS case, we pass in the buffer size provided by SLOF, for the machine init case, we continue to pass FDT_MAX_SIZE. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cedric Le Goater <clg@fr.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-12-17spapr: Don't trigger a CAS reboot for XICS/XIVE mode changeoverDavid Gibson
PAPR allows the interrupt controller used on a POWER9 machine (XICS or XIVE) to be selected by the guest operating system, by using the ibm,client-architecture-support (CAS) feature negotiation call. Currently, if the guest selects an interrupt controller different from the one selected at initial boot, this causes the system to be reset with the new model and the boot starts again. This means we run through the SLOF boot process twice, as well as any other bootloader (e.g. grub) in use before the OS calls CAS. This can be confusing and/or inconvenient for users. Thanks to two fairly recent changes, we no longer need this reboot. 1) we now completely regenerate the device tree when CAS is called (meaning we don't need special case updates for all the device tree changes caused by the interrupt controller mode change), 2) we now have explicit code paths to activate and deactivate the different interrupt controllers, rather than just implicitly calling those at machine reset time. We can therefore eliminate the reboot for changing irq mode, simply by putting a call to spapr_irq_update_active_intc() before we call spapr_h_cas_compose_response() (which gives the updated device tree to the guest firmware and OS). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cedric Le Goater <clg@fr.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-12-17ppc: well form kvmppc_hint_smt_possible error hint helperVladimir Sementsov-Ogievskiy
Make kvmppc_hint_smt_possible hint append helper well formed: rename errp to errp_in, as it is IN-parameter here (which is unusual for errp), rename function to be kvmppc_error_append_*_hint. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191127191434.20945-1-vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Dump the XIVE NVT tableCédric Le Goater
This is useful to dump the saved contexts of the vCPUs : configuration of the base END index of the vCPU and the Interrupt Pending Buffer register, which is updated when an interrupt can not be presented. When dumping the NVT table, we skip empty indirect pages which are not necessarily allocated. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-21-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Extend XiveRouter with a get_block_id() handlerCédric Le Goater
When doing CAM line compares, fetch the block id from the interrupt controller which can have set the PC_TCTXT_CHIPID field. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-20-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce a pnv_xive_block_id() helperCédric Le Goater
When PC_TCTXT_CHIPID_OVERRIDE is configured, the PC_TCTXT_CHIPID field overrides the hardwired chip ID in the Powerbus operations and for CAM compares. This is typically used in the one block-per-chip configuration to associate a unique block id number to each IC of the system. Simplify the model with a pnv_xive_block_id() helper and remove 'tctx_chipid' which becomes useless. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-19-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Synthesize interrupt from the saved IPB in the NVTCédric Le Goater
When a vCPU is dispatched on a HW thread, its context is pushed in the thread registers and it is activated by setting the VO bit in the CAM line word2. The HW grabs the associated NVT, pulls the IPB bits and merges them with the IPB of the new context. If interrupts were missed while the vCPU was not dispatched, these are synthesized in this sequence. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-18-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Introduce a xive_tctx_ipb_update() helperCédric Le Goater
We will use it to resend missed interrupts when a vCPU context is pushed on a HW thread. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-17-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Remove the get_tctx() XiveRouter handlerCédric Le Goater
It is now unused. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-16-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Move the TIMA operations to the controller modelCédric Le Goater
On the P9 Processor, the thread interrupt context registers of a CPU can be accessed "directly" when by load/store from the CPU or "indirectly" by the IC through an indirect TIMA page. This requires to configure first the PC_TCTXT_INDIRx registers. Today, we rely on the get_tctx() handler to deduce from the CPU PIR the chip from which the TIMA access is being done. By handling the TIMA memory ops under the interrupt controller model of each machine, we can uniformize the TIMA direct and indirect ops under PowerNV. We can also check that the CPUs have been enabled in the XIVE controller. This prepares ground for the future versions of XIVE. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-15-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Clarify how the TIMA is accessed on a multichip systemCédric Le Goater
The TIMA region gives access to the thread interrupt context registers of a CPU. It is mapped at the same address on all chips and can be accessed by any CPU of the system. To identify the chip from which the access is being done, the PowerBUS uses a 'chip' field in the load/store messages. QEMU does not model these messages, instead, we extract the chip id from the CPU PIR and do a lookup at the machine level to fetch the targeted interrupt controller. Introduce pnv_get_chip() and pnv_xive_tm_get_xive() helpers to clarify this process in pnv_xive_get_tctx(). The latter will be removed in the subsequent patches but the same principle will be kept. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17spapr/xive: Configure number of servers in KVMGreg Kurz
The XIVE KVM devices now has an attribute to configure the number of interrupt servers. This allows to greatly optimize the usage of the VP space in the XIVE HW, and thus to start a lot more VMs. Only set this attribute if available in order to support older POWER9 KVM. The XIVE KVM device now reports the exhaustion of VPs upon the connection of the first VCPU. Check that in order to have a chance to provide a hint to the user. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157478679392.67101.7843580591407950866.stgit@bahia.tlslab.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17spapr/xics: Configure number of servers in KVMGreg Kurz
The XICS-on-XIVE KVM devices now has an attribute to configure the number of interrupt servers. This allows to greatly optimize the usage of the VP space in the XIVE HW, and thus to start a lot more VMs. Only set this attribute if available in order to support older POWER9 KVM and pre-POWER9 XICS KVM devices. The XICS-on-XIVE KVM device now reports the exhaustion of VPs upon the connection of the first VCPU. Check that in order to have a chance to provide a hint to the user. ` Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157478678846.67101.9660531022460517710.stgit@bahia.tlslab.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17spapr: Pass the maximum number of vCPUs to the KVM interrupt controllerGreg Kurz
The XIVE and XICS-on-XIVE KVM devices on POWER9 hosts can greatly reduce their consumption of some scarce HW resources, namely Virtual Presenter identifiers, if they know the maximum number of vCPUs that may run in the VM. Prepare ground for this by passing the value down to xics_kvm_connect() and kvmppc_xive_connect(). This is purely mechanical, no functional change. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157478678301.67101.2717368060417156338.stgit@bahia.tlslab.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17linux-headers: UpdateGreg Kurz
Update to mainline commit be2eca94d144 ("Merge tag 'for-linus-5.5-1'` of git://github.com/cminyard/linux-ipmi") Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157478677756.67101.11558821804418331832.stgit@bahia.tlslab.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Extend the TIMA operation with a XivePresenter parameterCédric Le Goater
The TIMA operations are performed on behalf of the XIVE IVPE sub-engine (Presenter) on the thread interrupt context registers. The current operations supported by the model are simple and do not require access to the controller but more complex operations will need access to the controller NVT table and to its configuration. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Use the XiveFabric and XivePresenter interfacesCédric Le Goater
Now that the machines have handlers implementing the XiveFabric and XivePresenter interfaces, remove xive_presenter_match() and make use of the 'match_nvt' handler of the machine. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/spapr: Implement the XiveFabric interfaceCédric Le Goater
The CAM line matching sequence in the pseries machine does not change much apart from the use of the new QOM interfaces. There is an extra indirection because of the sPAPR IRQ backend of the machine. Only the XIVE backend implements the new 'match_nvt' handler. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Implement the XiveFabric interfaceCédric Le Goater
The CAM line matching on the PowerNV machine now scans all chips of the system and all CPUs of a chip to find a dispatched NVT in the thread contexts. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Introduce a XiveFabric interfaceCédric Le Goater
The XiveFabric QOM interface acts as the PowerBUS interface between the interrupt controller and the system and should be implemented by the QEMU machine. On HW, the XIVE sub-engine is responsible for the communication with the other chip is the Common Queue (CQ) bridge unit. This interface offers a 'match_nvt' handler to perform the CAM line matching when looking for a XIVE Presenter with a dispatched NVT. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Fix TIMA indirect accessCédric Le Goater
When the TIMA of a CPU needs to be accessed from the indirect page, the thread id of the target CPU is first stored in the PC_TCTXT_INDIR0 register. This thread id is relative to the chip and not to the system. Introduce a helper routine to look for a CPU of a given PIR and fix pnv_xive_get_indirect_tctx() to scan only the threads of the local chip and not the whole machine. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce a pnv_xive_is_cpu_enabled() helperCédric Le Goater
and use this helper to exclude CPUs which are not enabled in the XIVE controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Introduce a ppc_cpu_pir() helperCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Loop on the threads of the chip to find a matching NVTCédric Le Goater
CPU_FOREACH() loops on all the CPUs of the machine which is incorrect. Each XIVE Presenter should scan only the HW threads of the chip it belongs to. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Instantiate cores separatelyGreg Kurz
Allocating a big void * array to store multiple objects isn't a recommended practice for various reasons: - no compile time type checking - potential dangling pointers if a reference on an individual is taken and the array is freed later on - duplicate boiler plate everywhere the array is browsed through Allocate an array of pointers and populate it instead. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/xive: Implement the XivePresenter interfaceCédric Le Goater
Each XIVE Router model, sPAPR and PowerNV, now implements the 'match_nvt' handler of the XivePresenter QOM interface. This is simply moving code and taking into account the new API. To be noted that the xive_router_get_tctx() helper is not used anymore when doing CAM matching and will be removed later on after other changes. The XIVE presenter model is still too simple for the PowerNV machine and the CAM matching algo is not correct on multichip system. Subsequent patches will introduce more changes to scan all chips of the system. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 15:29:39 +0000