| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 315d3184525 turned --disable-uuid into a warning only; remove
the check from Travis.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190215094502.32149-2-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
We've had the build break with replication disabled, so lets
test that case in travis.
Suggsted-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190215094502.32149-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The builds are reaching the magic 50 minute limit with regularity so
lets split them up. Rather than doing a full debug build on both just
enable debug tcg for linux-user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
It fails to install homebrew. Unfortunately we cannot mark
it as an expected failure because Travis does not match
allow_failures rows against include rows (only against the
main test matrix, which we do not use at all), so just disable
it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190220105131.23479-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The alternate coroutine builds are really only of interest to people
running KVM (although I think you could use them for TCG if you really
tried). As they tend to run long lets kill two birds with one stone
and fold the --disable-tcg build into them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Re-building the tools and documents by default is a little wasteful as
they are not really affected by the main build options. Split tools
and documents into their own task with a minimal softmmu and
linux-user target list just to check they don't interact badly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The default package set installed on macOS builders from Travis already
includes libffi and gettext as shown by log messages:
Skipping install of libffi formula. It is already up-to-date.
Using libffi
Skipping install of gettext formula. It is already up-to-date.
Using gettext
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
For the two Python jobs, which seem to have the goal of making sure
QEMU builds successfully on the 3.0-3.6 spectrum of Python 3 versions,
the specified version is only applicable if a Python virtual
environment is used. To do that, it's necessary to define the
(primary?) language of the job to be Python.
Also, Travis doesn't have a 3.0 Python installation available for the
chosen distro, 3.4 being the lower version available.
Reference: https://docs.travis-ci.com/user/languages/python/#specifying-python-versions
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-4-crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[ehabkost: Now 3.4 is the lowest Python version available]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
fixup! Travis CI: make specified Python versions usable on jobs
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Travis is slowly catching up. Move to Xenial based images for our
current builds. These are now all proper VMs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The global defaults request "trusty" and "gcc", so matrix entries do not
need to repeat this.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Travis sometimes fails a build because it produces no console output for
over 10 minutes. If this is due to a genuine hang, it would be useful to
have used verbose test output to see where it failed. If this is just
due to tests being very slow, having verbose output might allow the
build to succeed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The Travis container based envs are deprecated:
https://docs.travis-ci.com/user/reference/trusty/
"Container-based infrastructure is currently being deprecated.
Please remove any sudo: false keys in your .travis.yml file
to use the default fully-virtualized Linux infrastructure
instead."
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
One of the matrix entries redefines the script command in order to add
the ${MAKEFLAGS} variable. Ideally ${MAKEFLAGS} would be referenced by
the definition of the ${TEST_CMD} env variable, but this isn't possible
in travis. ${MAKEFLAGS} exists to eliminate duplication of flags in
every "make" command, but this cure causes a worse problem, namely the
reduplication of the "script" command. It is simpler to just insert "-j3"
directly into any "make" command.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Rather than poking homebrew manually we can specify the packages
needed via the homebrew addon. These are only installed on MacOS based
builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The configure script & Makefile are already capable of figuring out
which git submodules are required for a given build platform, and
cloning them at the right time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Matrix entries are defining env variables using two different syntax
styles:
- env: FOO=bar
WIZZ=bang
and
- env:
- FOO=bar
- WIZZ=bang
Switch everything to use the latter style as the more normal indentation
approach.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The current build matrix is constructed from entries listed under the
environment variable config section, as well as the general purpose
build matrix section. Move everything under the general purpose section
so it is clear at a glance what is in the matrix.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Improve the readability of the travis config by adding two blank lines
between each major section and matrix entry.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
We have reached the point where the MacOSX build was regularly timing
out. So as before I've reduced the target list to "major"
architectures to try and bring the build time down. I've added an
additional MacOSX build with the latest XCode with a minimal list of
"most likely" targets on MacOS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
This enables the execution of the acceptance tests on Travis.
Because the Travis environment is based on Ubuntu Trusty, it requires
the python3-pip and python3.4-venv packages.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-4-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
This gives a more useful summary, sorted by descending % coverage,
after the tests have run. The final numbers will give an idea if our
coverage is getting better or worse.
To keep the width sane we need to post process the file that the old
gcovr tool generates. This is done with a mix of sed, awk and column
in the scripts/coverage-summary.sh script.
As quite a lot of lines don't get covered at all we filter out all the
0% lines. If the file doesn't appear it is not being exercised.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Force one config to build 'out-of-tree' (object files and executables
are created in a tree outside the project source code).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Builds only require:
- dtc
- keycodemapdb
- capstone
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: drop wget cache]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
These builds are reaching regular timeouts and probably don't need to
be so widely exercised. ftrace and ust in particular are used in
conjunction with whole system profiling which makes most sense with
KVM setups, hence the native softmmu target.
We also expand simple to cover the multiple log backends while
restricting its scope to user-mode testing only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This build is regularly timing out and even switching off linux-user
wasn't enough. Instead explicitly choose a target list of broadly the
"major" architectures. This is enough to check the gprof build
machinery works without worrying about the actual coverage results.
I did try various YAML constructs for specifying CONFIG with
continuation but couldn't get any of them to work hence the very long
line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
When configure fails in CI systems we must be able to see the contents
of the config.log file to diagnose the root cause.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
[AJB: used Eric's suggested {} form]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
GCC has moved on and so should we. We also enable apt update to ensure
we get the latest build from the toolchain PPA.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Add some commentary and make the selection of Container based Trusty
build explicit. We will need to add VM builds later when using docker.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
As Travis includes Clang 5.0 in its own build environment there is no
point manually building with older Clangs. We still need to test with
the two pythons though so we leave them as minimal system only builds.
We also split the clang build into two as it often exceeds the 40
minute build time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Currently the default testing doesn't exercise the linux-user builds
so there is no point spending time building them. We may want to
enable a separate gcov build once linux-user testing is re-enabled
although it's likely to report very low coverage.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
As all the disabled features only affect system emulation we might as
well disable user mode to save compile time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
As the build times have risen we keep timing out. Split the default
config into system and user builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The log backend is the default one, we don't need to explicitly set it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Travis image is based on Ubuntu Trusty (14.04), since d83414e1fd1 we get:
$ sudo -E \
apt-get -yq --no-install-suggests --no-install-recommends --force-yes \
install \
libaio-dev libattr1-dev libbrlapi-dev libcap-ng-dev libgcc-6-dev \
libgnutls-dev libgtk-3-dev libiscsi-dev liblttng-ust-dev \
libncurses5-dev libnfs-dev libnss3-dev libpixman-1-dev libpng12-dev \
librados-dev libsdl1.2-dev libseccomp-dev libspice-protocol-dev \
libspice-server-dev libssh2-1-dev liburcu-dev libusb-1.0-0-dev \
libvte-2.90-dev sparse uuid-dev
Reading package lists...
Building dependency tree...
Reading state information...
E: Unable to locate package libgcc-6-dev
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The modules and co-routine builds are only really relevant to softmmu
builds and regularly timeout on Travis. Let's disable linux-user
builds here for more headroom.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
|
|
* socket option parsing fix (Daniel)
* SCSI fixes (Fam)
* Readline double-free fix (Greg)
* More HVF attribution fixes (Izik)
* WHPX (Windows Hypervisor Platform Extensions) support (Justin)
* POLLHUP handler (Klim)
* ivshmem fixes (Ladi)
* memfd memory backend (Marc-André)
* improved error message (Marcelo)
* Memory fixes (Peter Xu, Zhecheng)
* Remove obsolete code and comments (Peter M.)
* qdev API improvements (Philippe)
* Add CONFIG_I2C switch (Thomas)
# gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
Add the WHPX acceleration enlightenments
Introduce the WHPX impl
Add the WHPX vcpu API
Add the Windows Hypervisor Platform accelerator.
tests/test-filter-redirector: move close()
tests: use memfd in vhost-user-test
vhost-user-test: make read-guest-mem setup its own qemu
tests: keep compiling failing vhost-user tests
Add memfd based hostmem
memfd: add hugetlbsize argument
memfd: add hugetlb support
memfd: add error argument, instead of perror()
cpus: join thread when removing a vCPU
cpus: hvf: unregister thread with RCU
cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug
cpus: dummy: unregister thread with RCU, exit loop on unplug
cpus: kvm: unregister thread with RCU
cpus: hax: register/unregister thread with RCU, exit loop on unplug
ivshmem: Disable irqfd on device reset
ivshmem: Improve MSI irqfd error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# cpus.c
|
|
It helps ASAN to detect more leaks on coroutine stacks, and to get rid
of some extra warnings.
Before:
tests/test-coroutine -p
/basic/lifecycle
/basic/lifecycle: ==20781==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
==20781==WARNING: ASan is ignoring requested __asan_handle_no_return:
stack top: 0x7ffcb184d000; bottom 0x7ff6c4cfd000; size: 0x0005ecb50000
(25446121472)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
OK
After:
tests/test-coroutine -p /basic/lifecycle
/basic/lifecycle: ==21110==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
OK
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Update travis to fix the build with ASAN annotations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently travis declares ancient python 2.4 is desired. Update that to
2.6 which is the oldest version any targetted distros still needs. If we
just list a python 3 version at the top level this will double the
number of travis jobs we run which is unreasonable.
So arbitrarily pick the clang test matrix entries to build with python
3.0 and 3.6, to extend coverage of python versions, without increasing
job count or build time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-14-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Because global environment variables can be overridden when .travis.yml
is processed by the docker-travis target, the effect of this patch is
that docker-travis now obeys the "J=n" option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
It's fairly easy for --disable-tcg to bitrot. Test it in our CI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170714093016.10897-1-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The Trusty based builds run a little slower than the main container
based ones. This is also true for the latest version of Clang. The
builds are getting very close (and occasionally run over) the 50 minute
timeout. Rather than partitioning by target I just split them into
linux-user and system builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Although we've reduced the matrix to avoid repeating clang builds we can
still add an additional clang build to use the latest stable version of
clang which will typically be available on current distros.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
We test with both gcc and clang in order to detect cases
where clang issues warnings that gcc misses. To achieve
this though we don't need to build QEMU in multiple
different configurations. Just a single clang-on-linux
build will be sufficient, if we have an "all enabled"
config.
This cuts the number of build jobs from 21 to 16,
reducing the load imposed on shared Travis CI infra.
This will make it practical to enable jobs for other
interesting & useful configurations without DOS'ing
Travis to much.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
As it seems easy to break the ThreadSanitizer build we should defend it to
ensure that fixes get applied when it breaks. We use the Ubuntu GCC PPA
to get the latest GCC goodness.
As we need to use the -fuse-ld=gold work around we have to disable the
linux-user targets as these trip up the linker.
The make check run is also disabled for Travis but this can be
re-enabled once the check targets have been fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-13-alex.bennee@linaro.org>
|
|
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
On travis-ci.org, all builds fail with
/usr/include/features.h:324:11: error: unable to open bits/predefs.h
With "make docker-travis@ubuntu", they fail with
/usr/include/features.h:374:13: error: unable to open sys/cdefs.h
With "make docker-travis@fedora", finally, they fail due to sparse
not being able to parse some #pragmas in glib headers. Just kill
the thing from the CI builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: tweak title for my OCD]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
