summaryrefslogtreecommitdiff
path: root/hw
diff options
context:
space:
mode:
Diffstat (limited to 'hw')
-rw-r--r--hw/alpha_sys.h1
-rw-r--r--hw/mips_fulong2e.c7
-rw-r--r--hw/mips_malta.c3
-rw-r--r--hw/pc_piix.c4
-rw-r--r--hw/ppc_newworld.c3
-rw-r--r--hw/ppc_oldworld.c3
-rw-r--r--hw/ppc_prep.c3
-rw-r--r--hw/realview.c3
-rw-r--r--hw/usb-ohci.h9
-rw-r--r--hw/usb-uhci.h10
-rw-r--r--hw/usb.h1
-rw-r--r--hw/usb/bus.c (renamed from hw/usb-bus.c)6
-rw-r--r--hw/usb/core.c (renamed from hw/usb.c)39
-rw-r--r--hw/usb/desc.c (renamed from hw/usb-desc.c)4
-rw-r--r--hw/usb/desc.h (renamed from hw/usb-desc.h)0
-rw-r--r--hw/usb/dev-audio.c (renamed from hw/usb-audio.c)8
-rw-r--r--hw/usb/dev-bluetooth.c (renamed from hw/usb-bt.c)6
-rw-r--r--hw/usb/dev-hid.c (renamed from hw/usb-hid.c)8
-rw-r--r--hw/usb/dev-hub.c (renamed from hw/usb-hub.c)4
-rw-r--r--hw/usb/dev-network.c (renamed from hw/usb-net.c)4
-rw-r--r--hw/usb/dev-serial.c (renamed from hw/usb-serial.c)4
-rw-r--r--hw/usb/dev-smartcard-reader.c (renamed from hw/usb-ccid.c)4
-rw-r--r--hw/usb/dev-storage.c (renamed from hw/usb-msd.c)12
-rw-r--r--hw/usb/dev-wacom.c (renamed from hw/usb-wacom.c)6
-rw-r--r--hw/usb/hcd-ehci.c (renamed from hw/usb-ehci.c)12
-rw-r--r--hw/usb/hcd-musb.c (renamed from hw/usb-musb.c)6
-rw-r--r--hw/usb/hcd-ohci.c (renamed from hw/usb-ohci.c)33
-rw-r--r--hw/usb/hcd-uhci.c (renamed from hw/usb-uhci.c)156
-rw-r--r--hw/usb/hcd-xhci.c (renamed from hw/usb-xhci.c)10
-rw-r--r--hw/usb/host-bsd.c647
-rw-r--r--hw/usb/host-linux.c1913
-rw-r--r--hw/usb/host-stub.c52
-rw-r--r--hw/usb/libhw.c (renamed from hw/usb-libhw.c)2
-rw-r--r--hw/usb/redirect.c1485
-rw-r--r--hw/versatilepb.c3
35 files changed, 4270 insertions, 201 deletions
diff --git a/hw/alpha_sys.h b/hw/alpha_sys.h
index d54b18f8ed..f9506c69a7 100644
--- a/hw/alpha_sys.h
+++ b/hw/alpha_sys.h
@@ -8,7 +8,6 @@
#include "ide.h"
#include "net.h"
#include "pc.h"
-#include "usb-ohci.h"
#include "irq.h"
diff --git a/hw/mips_fulong2e.c b/hw/mips_fulong2e.c
index e3ba9dd42d..efdfdc29ff 100644
--- a/hw/mips_fulong2e.c
+++ b/hw/mips_fulong2e.c
@@ -29,7 +29,6 @@
#include "mips.h"
#include "mips_cpudevs.h"
#include "pci.h"
-#include "usb-uhci.h"
#include "qemu-char.h"
#include "sysemu.h"
#include "audio/audio.h"
@@ -355,8 +354,10 @@ static void mips_fulong2e_init(ram_addr_t ram_size, const char *boot_device,
isa_bus_irqs(isa_bus, i8259);
vt82c686b_ide_init(pci_bus, hd, PCI_DEVFN(FULONG2E_VIA_SLOT, 1));
- usb_uhci_vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2));
- usb_uhci_vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3));
+ pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2),
+ "vt82c686b-usb-uhci");
+ pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3),
+ "vt82c686b-usb-uhci");
smbus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 4),
0xeee1, NULL);
diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index b1563ed2a7..866699dbf0 100644
--- a/hw/mips_malta.c
+++ b/hw/mips_malta.c
@@ -33,7 +33,6 @@
#include "mips.h"
#include "mips_cpudevs.h"
#include "pci.h"
-#include "usb-uhci.h"
#include "vmware_vga.h"
#include "qemu-char.h"
#include "sysemu.h"
@@ -965,7 +964,7 @@ void mips_malta_init (ram_addr_t ram_size,
isa_bus_irqs(isa_bus, s->i8259);
pci_piix4_ide_init(pci_bus, hd, piix4_devfn + 1);
- usb_uhci_piix4_init(pci_bus, piix4_devfn + 2);
+ pci_create_simple(pci_bus, piix4_devfn + 2, "piix4-usb-uhci");
smbus = piix4_pm_init(pci_bus, piix4_devfn + 3, 0x1100,
isa_get_irq(NULL, 9), NULL, 0);
/* TODO: Populate SPD eeprom data. */
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index 6c5c40f5df..3f99f9a7c2 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -28,8 +28,6 @@
#include "pc.h"
#include "apic.h"
#include "pci.h"
-#include "usb-uhci.h"
-#include "usb-ohci.h"
#include "net.h"
#include "boards.h"
#include "ide.h"
@@ -284,7 +282,7 @@ static void pc_init1(MemoryRegion *system_memory,
floppy, idebus[0], idebus[1], rtc_state);
if (pci_enabled && usb_enabled) {
- usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pci_enabled && acpi_enabled) {
diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
index 506187b182..2fec5b4d67 100644
--- a/hw/ppc_newworld.c
+++ b/hw/ppc_newworld.c
@@ -54,7 +54,6 @@
#include "nvram.h"
#include "pc.h"
#include "pci.h"
-#include "usb-ohci.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
@@ -352,7 +351,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
/* U3 needs to use USB for input because Linux doesn't support via-cuda
diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
index 9295a34f59..49c2c9795e 100644
--- a/hw/ppc_oldworld.c
+++ b/hw/ppc_oldworld.c
@@ -34,7 +34,6 @@
#include "net.h"
#include "isa.h"
#include "pci.h"
-#include "usb-ohci.h"
#include "boards.h"
#include "fw_cfg.h"
#include "escc.h"
@@ -278,7 +277,7 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
index eb43fb5849..dc9edd7bf5 100644
--- a/hw/ppc_prep.c
+++ b/hw/ppc_prep.c
@@ -30,7 +30,6 @@
#include "isa.h"
#include "pci.h"
#include "pci_host.h"
-#include "usb-ohci.h"
#include "ppc.h"
#include "boards.h"
#include "qemu-log.h"
@@ -688,7 +687,7 @@ static void ppc_prep_init (ram_addr_t ram_size,
#endif
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59);
diff --git a/hw/realview.c b/hw/realview.c
index ae1bbcdac3..50ea67cb26 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -12,7 +12,6 @@
#include "primecell.h"
#include "devices.h"
#include "pci.h"
-#include "usb-ohci.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
@@ -305,7 +304,7 @@ static void realview_init(ram_addr_t ram_size,
sysbus_connect_irq(busdev, 3, pic[51]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
diff --git a/hw/usb-ohci.h b/hw/usb-ohci.h
deleted file mode 100644
index eefcef3602..0000000000
--- a/hw/usb-ohci.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef QEMU_USB_OHCI_H
-#define QEMU_USB_OHCI_H
-
-#include "qemu-common.h"
-
-void usb_ohci_init_pci(struct PCIBus *bus, int devfn);
-
-#endif
-
diff --git a/hw/usb-uhci.h b/hw/usb-uhci.h
deleted file mode 100644
index 3e4d3777d4..0000000000
--- a/hw/usb-uhci.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef QEMU_USB_UHCI_H
-#define QEMU_USB_UHCI_H
-
-#include "qemu-common.h"
-
-void usb_uhci_piix3_init(PCIBus *bus, int devfn);
-void usb_uhci_piix4_init(PCIBus *bus, int devfn);
-void usb_uhci_vt82c686b_init(PCIBus *bus, int devfn);
-
-#endif
diff --git a/hw/usb.h b/hw/usb.h
index d60d03df9c..e95085f0b3 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -336,6 +336,7 @@ struct USBPacket {
void usb_packet_init(USBPacket *p);
void usb_packet_set_state(USBPacket *p, USBPacketState state);
+void usb_packet_check_state(USBPacket *p, USBPacketState expected);
void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep);
void usb_packet_addbuf(USBPacket *p, void *ptr, size_t len);
int usb_packet_map(USBPacket *p, QEMUSGList *sgl);
diff --git a/hw/usb-bus.c b/hw/usb/bus.c
index 70b7ebc086..d3f835895d 100644
--- a/hw/usb-bus.c
+++ b/hw/usb/bus.c
@@ -1,6 +1,6 @@
-#include "hw.h"
-#include "usb.h"
-#include "qdev.h"
+#include "hw/hw.h"
+#include "hw/usb.h"
+#include "hw/qdev.h"
#include "sysemu.h"
#include "monitor.h"
#include "trace.h"
diff --git a/hw/usb.c b/hw/usb/core.c
index 1ec2e90ef7..a4048fe3e0 100644
--- a/hw/usb.c
+++ b/hw/usb/core.c
@@ -24,7 +24,7 @@
* THE SOFTWARE.
*/
#include "qemu-common.h"
-#include "usb.h"
+#include "hw/usb.h"
#include "iov.h"
#include "trace.h"
@@ -378,7 +378,7 @@ int usb_handle_packet(USBDevice *dev, USBPacket *p)
}
assert(dev == p->ep->dev);
assert(dev->state == USB_STATE_DEFAULT);
- assert(p->state == USB_PACKET_SETUP);
+ usb_packet_check_state(p, USB_PACKET_SETUP);
assert(p->ep != NULL);
if (QTAILQ_EMPTY(&p->ep->queue) || p->ep->pipeline) {
@@ -406,7 +406,7 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
USBEndpoint *ep = p->ep;
int ret;
- assert(p->state == USB_PACKET_ASYNC);
+ usb_packet_check_state(p, USB_PACKET_ASYNC);
assert(QTAILQ_FIRST(&ep->queue) == p);
usb_packet_set_state(p, USB_PACKET_COMPLETE);
QTAILQ_REMOVE(&ep->queue, p, queue);
@@ -417,7 +417,7 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
if (p->state == USB_PACKET_ASYNC) {
break;
}
- assert(p->state == USB_PACKET_QUEUED);
+ usb_packet_check_state(p, USB_PACKET_QUEUED);
ret = usb_process_one(p);
if (ret == USB_RET_ASYNC) {
usb_packet_set_state(p, USB_PACKET_ASYNC);
@@ -450,7 +450,7 @@ void usb_packet_init(USBPacket *p)
qemu_iovec_init(&p->iov, 1);
}
-void usb_packet_set_state(USBPacket *p, USBPacketState state)
+static const char *usb_packet_state_name(USBPacketState state)
{
static const char *name[] = {
[USB_PACKET_UNDEFINED] = "undef",
@@ -460,11 +460,36 @@ void usb_packet_set_state(USBPacket *p, USBPacketState state)
[USB_PACKET_COMPLETE] = "complete",
[USB_PACKET_CANCELED] = "canceled",
};
+ if (state < ARRAY_SIZE(name)) {
+ return name[state];
+ }
+ return "INVALID";
+}
+
+void usb_packet_check_state(USBPacket *p, USBPacketState expected)
+{
+ USBDevice *dev;
+ USBBus *bus;
+
+ if (p->state == expected) {
+ return;
+ }
+ dev = p->ep->dev;
+ bus = usb_bus_from_device(dev);
+ trace_usb_packet_state_fault(bus->busnr, dev->port->path, p->ep->nr, p,
+ usb_packet_state_name(p->state),
+ usb_packet_state_name(expected));
+ assert(!"usb packet state check failed");
+}
+
+void usb_packet_set_state(USBPacket *p, USBPacketState state)
+{
USBDevice *dev = p->ep->dev;
USBBus *bus = usb_bus_from_device(dev);
- trace_usb_packet_state_change(bus->busnr, dev->port->path, p->ep->nr,
- p, name[p->state], name[state]);
+ trace_usb_packet_state_change(bus->busnr, dev->port->path, p->ep->nr, p,
+ usb_packet_state_name(p->state),
+ usb_packet_state_name(state));
p->state = state;
}
diff --git a/hw/usb-desc.c b/hw/usb/desc.c
index ccf85ade9e..9847a75b83 100644
--- a/hw/usb-desc.c
+++ b/hw/usb/desc.c
@@ -1,5 +1,5 @@
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "trace.h"
/* ------------------------------------------------------------------ */
diff --git a/hw/usb-desc.h b/hw/usb/desc.h
index d6e07ea5d2..d6e07ea5d2 100644
--- a/hw/usb-desc.h
+++ b/hw/usb/desc.h
diff --git a/hw/usb-audio.c b/hw/usb/dev-audio.c
index fed136117b..426b95c82b 100644
--- a/hw/usb-audio.c
+++ b/hw/usb/dev-audio.c
@@ -30,10 +30,10 @@
*/
#include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
-#include "hw.h"
-#include "audiodev.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+#include "hw/hw.h"
+#include "hw/audiodev.h"
#include "audio/audio.h"
#define USBAUDIO_VENDOR_NUM 0x46f4 /* CRC16() of "QEMU" */
diff --git a/hw/usb-bt.c b/hw/usb/dev-bluetooth.c
index 23c39ecc23..195370c24a 100644
--- a/hw/usb-bt.c
+++ b/hw/usb/dev-bluetooth.c
@@ -19,10 +19,10 @@
*/
#include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "net.h"
-#include "bt.h"
+#include "hw/bt.h"
struct USBBtState {
USBDevice dev;
diff --git a/hw/usb-hid.c b/hw/usb/dev-hid.c
index 37bca78eca..f29544d954 100644
--- a/hw/usb-hid.c
+++ b/hw/usb/dev-hid.c
@@ -22,12 +22,12 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "hw.h"
+#include "hw/hw.h"
#include "console.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "qemu-timer.h"
-#include "hid.h"
+#include "hw/hid.h"
/* HID interface requests */
#define GET_REPORT 0xa101
diff --git a/hw/usb-hub.c b/hw/usb/dev-hub.c
index a12856e2e9..eb4e711207 100644
--- a/hw/usb-hub.c
+++ b/hw/usb/dev-hub.c
@@ -22,8 +22,8 @@
* THE SOFTWARE.
*/
#include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
//#define DEBUG
diff --git a/hw/usb-net.c b/hw/usb/dev-network.c
index 22b82017e3..cff55f223e 100644
--- a/hw/usb-net.c
+++ b/hw/usb/dev-network.c
@@ -24,8 +24,8 @@
*/
#include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "net.h"
#include "qemu-queue.h"
#include "sysemu.h"
diff --git a/hw/usb-serial.c b/hw/usb/dev-serial.c
index 0aae379b20..8dcac8bc88 100644
--- a/hw/usb-serial.c
+++ b/hw/usb/dev-serial.c
@@ -10,8 +10,8 @@
#include "qemu-common.h"
#include "qemu-error.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "qemu-char.h"
//#define DEBUG_Serial
diff --git a/hw/usb-ccid.c b/hw/usb/dev-smartcard-reader.c
index ced687f288..8e66675d86 100644
--- a/hw/usb-ccid.c
+++ b/hw/usb/dev-smartcard-reader.c
@@ -36,8 +36,8 @@
#include "qemu-common.h"
#include "qemu-error.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
#include "monitor.h"
#include "hw/ccid.h"
diff --git a/hw/usb-msd.c b/hw/usb/dev-storage.c
index c6f08a0313..bdbe7bdd11 100644
--- a/hw/usb-msd.c
+++ b/hw/usb/dev-storage.c
@@ -10,9 +10,9 @@
#include "qemu-common.h"
#include "qemu-option.h"
#include "qemu-config.h"
-#include "usb.h"
-#include "usb-desc.h"
-#include "scsi.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+#include "hw/scsi.h"
#include "console.h"
#include "monitor.h"
#include "sysemu.h"
@@ -193,9 +193,9 @@ static void usb_msd_send_status(MSDState *s, USBPacket *p)
int len;
DPRINTF("Command status %d tag 0x%x, len %zd\n",
- s->csw.status, s->csw.tag, p->iov.size);
+ s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
- assert(s->csw.sig == 0x53425355);
+ assert(s->csw.sig == cpu_to_le32(0x53425355));
len = MIN(sizeof(s->csw), p->iov.size);
usb_packet_copy(p, &s->csw, len);
memset(&s->csw, 0, sizeof(s->csw));
@@ -233,7 +233,7 @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r
s->csw.sig = cpu_to_le32(0x53425355);
s->csw.tag = cpu_to_le32(req->tag);
- s->csw.residue = s->residue;
+ s->csw.residue = cpu_to_le32(s->residue);
s->csw.status = status != 0;
if (s->packet) {
diff --git a/hw/usb-wacom.c b/hw/usb/dev-wacom.c
index 197e2dced5..c1cfd74403 100644
--- a/hw/usb-wacom.c
+++ b/hw/usb/dev-wacom.c
@@ -25,10 +25,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "hw.h"
+#include "hw/hw.h"
#include "console.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
/* Interface requests */
#define WACOM_GET_REPORT 0x2101
diff --git a/hw/usb-ehci.c b/hw/usb/hcd-ehci.c
index df742f7f02..60f9f5bdb5 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -22,10 +22,10 @@
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
-#include "hw.h"
+#include "hw/hw.h"
#include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
#include "monitor.h"
#include "trace.h"
#include "dma.h"
@@ -419,7 +419,6 @@ struct EHCIState {
USBPacket ipacket;
QEMUSGList isgl;
- int isoch_pause;
uint64_t last_run_ns;
};
@@ -907,7 +906,6 @@ static void ehci_reset(void *opaque)
s->astate = EST_INACTIVE;
s->pstate = EST_INACTIVE;
- s->isoch_pause = -1;
s->attach_poll_counter = 0;
for(i = 0; i < NB_PORTS; i++) {
@@ -2150,9 +2148,7 @@ static void ehci_frame_timer(void *opaque)
for (i = 0; i < frames; i++) {
if ( !(ehci->usbsts & USBSTS_HALT)) {
- if (ehci->isoch_pause <= 0) {
- ehci->frindex += 8;
- }
+ ehci->frindex += 8;
if (ehci->frindex > 0x00001fff) {
ehci->frindex = 0;
diff --git a/hw/usb-musb.c b/hw/usb/hcd-musb.c
index 820907a9a9..fa9385ee49 100644
--- a/hw/usb-musb.c
+++ b/hw/usb/hcd-musb.c
@@ -22,9 +22,9 @@
*/
#include "qemu-common.h"
#include "qemu-timer.h"
-#include "usb.h"
-#include "irq.h"
-#include "hw.h"
+#include "hw/usb.h"
+#include "hw/irq.h"
+#include "hw/hw.h"
/* Common USB registers */
#define MUSB_HDRC_FADDR 0x00 /* 8-bit */
diff --git a/hw/usb-ohci.c b/hw/usb/hcd-ohci.c
index 20aaa74250..1a1cc88b1f 100644
--- a/hw/usb-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -26,13 +26,12 @@
* o BIOS work to boot from USB storage
*/
-#include "hw.h"
+#include "hw/hw.h"
#include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
-#include "usb-ohci.h"
-#include "sysbus.h"
-#include "qdev-addr.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
+#include "hw/sysbus.h"
+#include "hw/qdev-addr.h"
//#define DEBUG_OHCI
/* Dump packet contents. */
@@ -122,6 +121,11 @@ struct ohci_hcca {
uint16_t frame, pad;
uint32_t done;
};
+#define HCCA_WRITEBACK_OFFSET offsetof(struct ohci_hcca, frame)
+#define HCCA_WRITEBACK_SIZE 8 /* frame, pad, done */
+
+#define ED_WBACK_OFFSET offsetof(struct ohci_ed, head)
+#define ED_WBACK_SIZE 4
static void ohci_bus_stop(OHCIState *ohci);
static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev);
@@ -569,7 +573,13 @@ static inline int ohci_read_hcca(OHCIState *ohci,
static inline int ohci_put_ed(OHCIState *ohci,
uint32_t addr, struct ohci_ed *ed)
{
- return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2);
+ /* ed->tail is under control of the HCD.
+ * Since just ed->head is changed by HC, just write back this
+ */
+
+ return put_dwords(ohci, addr + ED_WBACK_OFFSET,
+ (uint32_t *)((char *)ed + ED_WBACK_OFFSET),
+ ED_WBACK_SIZE >> 2);
}
static inline int ohci_put_td(OHCIState *ohci,
@@ -588,7 +598,9 @@ static inline int ohci_put_iso_td(OHCIState *ohci,
static inline int ohci_put_hcca(OHCIState *ohci,
uint32_t addr, struct ohci_hcca *hcca)
{
- cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca));
+ cpu_physical_memory_write(addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET,
+ (char *)hcca + HCCA_WRITEBACK_OFFSET,
+ HCCA_WRITEBACK_SIZE);
return 1;
}
@@ -1815,11 +1827,6 @@ static int usb_ohci_initfn_pci(struct PCIDevice *dev)
return 0;
}
-void usb_ohci_init_pci(struct PCIBus *bus, int devfn)
-{
- pci_create_simple(bus, devfn, "pci-ohci");
-}
-
typedef struct {
SysBusDevice busdev;
OHCIState ohci;
diff --git a/hw/usb-uhci.c b/hw/usb/hcd-uhci.c
index 304b84b831..e55dad914c 100644
--- a/hw/usb-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -25,13 +25,13 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "hw.h"
-#include "usb.h"
-#include "pci.h"
+#include "hw/hw.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
#include "qemu-timer.h"
-#include "usb-uhci.h"
#include "iov.h"
#include "dma.h"
+#include "trace.h"
//#define DEBUG
//#define DEBUG_DUMP_DATA
@@ -77,22 +77,13 @@
#define NB_PORTS 2
-#ifdef DEBUG
-#define DPRINTF printf
-
-static const char *pid2str(int pid)
-{
- switch (pid) {
- case USB_TOKEN_SETUP: return "SETUP";
- case USB_TOKEN_IN: return "IN";
- case USB_TOKEN_OUT: return "OUT";
- }
- return "?";
-}
-
-#else
-#define DPRINTF(...)
-#endif
+enum {
+ TD_RESULT_STOP_FRAME = 10,
+ TD_RESULT_COMPLETE,
+ TD_RESULT_NEXT_QH,
+ TD_RESULT_ASYNC_START,
+ TD_RESULT_ASYNC_CONT,
+};
typedef struct UHCIState UHCIState;
typedef struct UHCIAsync UHCIAsync;
@@ -188,6 +179,7 @@ static UHCIQueue *uhci_queue_get(UHCIState *s, UHCI_TD *td)
queue->token = token;
QTAILQ_INIT(&queue->asyncs);
QTAILQ_INSERT_HEAD(&s->queues, queue, next);
+ trace_usb_uhci_queue_add(queue->token);
return queue;
}
@@ -195,23 +187,27 @@ static void uhci_queue_free(UHCIQueue *queue)
{
UHCIState *s = queue->uhci;
+ trace_usb_uhci_queue_del(queue->token);
QTAILQ_REMOVE(&s->queues, queue, next);
g_free(queue);
}
-static UHCIAsync *uhci_async_alloc(UHCIQueue *queue)
+static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t addr)
{
UHCIAsync *async = g_new0(UHCIAsync, 1);
async->queue = queue;
+ async->td = addr;
usb_packet_init(&async->packet);
pci_dma_sglist_init(&async->sgl, &queue->uhci->dev, 1);
+ trace_usb_uhci_packet_add(async->queue->token, async->td);
return async;
}
static void uhci_async_free(UHCIAsync *async)
{
+ trace_usb_uhci_packet_del(async->queue->token, async->td);
usb_packet_cleanup(&async->packet);
qemu_sglist_destroy(&async->sgl);
g_free(async);
@@ -221,19 +217,19 @@ static void uhci_async_link(UHCIAsync *async)
{
UHCIQueue *queue = async->queue;
QTAILQ_INSERT_TAIL(&queue->asyncs, async, next);
+ trace_usb_uhci_packet_link_async(async->queue->token, async->td);
}
static void uhci_async_unlink(UHCIAsync *async)
{
UHCIQueue *queue = async->queue;
QTAILQ_REMOVE(&queue->asyncs, async, next);
+ trace_usb_uhci_packet_unlink_async(async->queue->token, async->td);
}
static void uhci_async_cancel(UHCIAsync *async)
{
- DPRINTF("uhci: cancel td 0x%x token 0x%x done %u\n",
- async->td, async->token, async->done);
-
+ trace_usb_uhci_packet_cancel(async->queue->token, async->td, async->done);
if (!async->done)
usb_cancel_packet(&async->packet);
uhci_async_free(async);
@@ -300,6 +296,7 @@ static void uhci_async_cancel_all(UHCIState *s)
uhci_async_unlink(curr);
uhci_async_cancel(curr);
}
+ uhci_queue_free(queue);
}
}
@@ -350,7 +347,7 @@ static void uhci_reset(void *opaque)
int i;
UHCIPort *port;
- DPRINTF("uhci: full reset\n");
+ trace_usb_uhci_reset();
pci_conf = s->dev.config;
@@ -450,12 +447,13 @@ static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
UHCIState *s = opaque;
addr &= 0x1f;
- DPRINTF("uhci: writew port=0x%04x val=0x%04x\n", addr, val);
+ trace_usb_uhci_mmio_writew(addr, val);
switch(addr) {
case 0x00:
if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
/* start frame processing */
+ trace_usb_uhci_schedule_start();
s->expire_time = qemu_get_clock_ns(vm_clock) +
(get_ticks_per_sec() / FRAME_TIMER_FREQ);
qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock));
@@ -560,7 +558,7 @@ static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
break;
}
- DPRINTF("uhci: readw port=0x%04x val=0x%04x\n", addr, val);
+ trace_usb_uhci_mmio_readw(addr, val);
return val;
}
@@ -570,7 +568,7 @@ static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
UHCIState *s = opaque;
addr &= 0x1f;
- DPRINTF("uhci: writel port=0x%04x val=0x%08x\n", addr, val);
+ trace_usb_uhci_mmio_writel(addr, val);
switch(addr) {
case 0x08:
@@ -593,6 +591,7 @@ static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
val = 0xffffffff;
break;
}
+ trace_usb_uhci_mmio_readl(addr, val);
return val;
}
@@ -728,13 +727,15 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_
if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
*int_mask |= 0x02;
/* short packet: do not update QH */
- DPRINTF("uhci: short packet. td 0x%x token 0x%x\n", async->td, async->token);
- return 1;
+ trace_usb_uhci_packet_complete_shortxfer(async->queue->token,
+ async->td);
+ return TD_RESULT_NEXT_QH;
}
}
/* success */
- return 0;
+ trace_usb_uhci_packet_complete_success(async->queue->token, async->td);
+ return TD_RESULT_COMPLETE;
out:
switch(ret) {
@@ -746,7 +747,8 @@ out:
*int_mask |= 0x01;
}
uhci_update_irq(s);
- return 1;
+ trace_usb_uhci_packet_complete_stall(async->queue->token, async->td);
+ return TD_RESULT_NEXT_QH;
case USB_RET_BABBLE:
td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
@@ -757,13 +759,14 @@ out:
}
uhci_update_irq(s);
/* frame interrupted */
- return -1;
+ trace_usb_uhci_packet_complete_babble(async->queue->token, async->td);
+ return TD_RESULT_STOP_FRAME;
case USB_RET_NAK:
td->ctrl |= TD_CTRL_NAK;
if (pid == USB_TOKEN_SETUP)
break;
- return 1;
+ return TD_RESULT_NEXT_QH;
case USB_RET_IOERROR:
case USB_RET_NODEV:
@@ -783,11 +786,13 @@ out:
if (td->ctrl & TD_CTRL_IOC)
*int_mask |= 0x01;
uhci_update_irq(s);
+ trace_usb_uhci_packet_complete_error(async->queue->token,
+ async->td);
}
}
td->ctrl = (td->ctrl & ~(3 << TD_CTRL_ERROR_SHIFT)) |
(err << TD_CTRL_ERROR_SHIFT);
- return 1;
+ return TD_RESULT_NEXT_QH;
}
static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *int_mask)
@@ -800,7 +805,7 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
/* Is active ? */
if (!(td->ctrl & TD_CTRL_ACTIVE))
- return 1;
+ return TD_RESULT_NEXT_QH;
async = uhci_async_find_td(s, addr, td);
if (async) {
@@ -808,22 +813,19 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
async->queue->valid = 32;
if (!async->done)
- return 1;
+ return TD_RESULT_ASYNC_CONT;
uhci_async_unlink(async);
goto done;
}
/* Allocate new packet */
- async = uhci_async_alloc(uhci_queue_get(s, td));
- if (!async)
- return 1;
+ async = uhci_async_alloc(uhci_queue_get(s, td), addr);
/* valid needs to be large enough to handle 10 frame delay
* for initial isochronous requests
*/
async->queue->valid = 32;
- async->td = addr;
async->isoc = td->ctrl & TD_CTRL_IOS;
max_len = ((td->token >> 21) + 1) & 0x7ff;
@@ -852,12 +854,12 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
uhci_async_free(async);
s->status |= UHCI_STS_HCPERR;
uhci_update_irq(s);
- return -1;
+ return TD_RESULT_STOP_FRAME;
}
if (len == USB_RET_ASYNC) {
uhci_async_link(async);
- return 2;
+ return TD_RESULT_ASYNC_START;
}
async->packet.result = len;
@@ -874,8 +876,6 @@ static void uhci_async_complete(USBPort *port, USBPacket *packet)
UHCIAsync *async = container_of(packet, UHCIAsync, packet);
UHCIState *s = async->queue->uhci;
- DPRINTF("uhci: async complete. td 0x%x token 0x%x\n", async->td, async->token);
-
if (async->isoc) {
UHCI_TD td;
uint32_t link = async->td;
@@ -963,8 +963,9 @@ static void uhci_fill_queue(UHCIState *s, UHCI_TD *td)
if (uhci_queue_token(&ptd) != token) {
break;
}
+ trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
ret = uhci_handle_td(s, plink, &ptd, &int_mask);
- assert(ret == 2); /* got USB_RET_ASYNC */
+ assert(ret == TD_RESULT_ASYNC_START);
assert(int_mask == 0);
plink = ptd.link;
}
@@ -981,8 +982,6 @@ static void uhci_process_frame(UHCIState *s)
frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
- DPRINTF("uhci: processing frame %d addr 0x%x\n" , s->frnum, frame_addr);
-
pci_dma_read(&s->dev, frame_addr, &link, 4);
le32_to_cpus(&link);
@@ -994,6 +993,7 @@ static void uhci_process_frame(UHCIState *s)
for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) {
if (is_qh(link)) {
/* QH */
+ trace_usb_uhci_qh_load(link & ~0xf);
if (qhdb_insert(&qhdb, link)) {
/*
@@ -1006,14 +1006,14 @@ static void uhci_process_frame(UHCIState *s)
* (b) we've reached the usb 1.1 bandwidth, which is
* 1280 bytes/frame.
*/
- DPRINTF("uhci: detected loop. qh 0x%x\n", link);
if (td_count == 0) {
- DPRINTF("uhci: no transaction last round, stop\n");
+ trace_usb_uhci_frame_loop_stop_idle();
break;
} else if (bytes_count >= 1280) {
- DPRINTF("uhci: bandwidth limit reached, stop\n");
+ trace_usb_uhci_frame_loop_stop_bandwidth();
break;
} else {
+ trace_usb_uhci_frame_loop_continue();
td_count = 0;
qhdb_reset(&qhdb);
qhdb_insert(&qhdb, link);
@@ -1024,9 +1024,6 @@ static void uhci_process_frame(UHCIState *s)
le32_to_cpus(&qh.link);
le32_to_cpus(&qh.el_link);
- DPRINTF("uhci: QH 0x%x load. link 0x%x elink 0x%x\n",
- link, qh.link, qh.el_link);
-
if (!is_valid(qh.el_link)) {
/* QH w/o elements */
curr_qh = 0;
@@ -1045,9 +1042,7 @@ static void uhci_process_frame(UHCIState *s)
le32_to_cpus(&td.ctrl);
le32_to_cpus(&td.token);
le32_to_cpus(&td.buffer);
-
- DPRINTF("uhci: TD 0x%x load. link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
- link, td.link, td.ctrl, td.token, curr_qh);
+ trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
old_td_ctrl = td.ctrl;
ret = uhci_handle_td(s, link, &td, &int_mask);
@@ -1058,31 +1053,25 @@ static void uhci_process_frame(UHCIState *s)
}
switch (ret) {
- case -1: /* interrupted frame */
+ case TD_RESULT_STOP_FRAME: /* interrupted frame */
goto out;
- case 1: /* goto next queue */
- DPRINTF("uhci: TD 0x%x skip. "
- "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
- link, td.link, td.ctrl, td.token, curr_qh);
+ case TD_RESULT_NEXT_QH:
+ case TD_RESULT_ASYNC_CONT:
+ trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf);
link = curr_qh ? qh.link : td.link;
continue;
- case 2: /* got USB_RET_ASYNC */
- DPRINTF("uhci: TD 0x%x async. "
- "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
- link, td.link, td.ctrl, td.token, curr_qh);
+ case TD_RESULT_ASYNC_START:
+ trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf);
if (is_valid(td.link)) {
uhci_fill_queue(s, &td);
}
link = curr_qh ? qh.link : td.link;
continue;
- case 0: /* completed TD */
- DPRINTF("uhci: TD 0x%x done. "
- "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
- link, td.link, td.ctrl, td.token, curr_qh);
-
+ case TD_RESULT_COMPLETE:
+ trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf);
link = td.link;
td_count++;
bytes_count += (td.ctrl & 0x7ff) + 1;
@@ -1095,10 +1084,6 @@ static void uhci_process_frame(UHCIState *s)
if (!depth_first(link)) {
/* done with this QH */
-
- DPRINTF("uhci: QH 0x%x done. link 0x%x elink 0x%x\n",
- curr_qh, qh.link, qh.el_link);
-
curr_qh = 0;
link = qh.link;
}
@@ -1125,11 +1110,11 @@ static void uhci_frame_timer(void *opaque)
if (!(s->cmd & UHCI_CMD_RS)) {
/* Full stop */
+ trace_usb_uhci_schedule_stop();
qemu_del_timer(s->frame_timer);
+ uhci_async_cancel_all(s);
/* set hchalted bit in status - UHCI11D 2.1.2 */
s->status |= UHCI_STS_HCHALTED;
-
- DPRINTF("uhci: halted\n");
return;
}
@@ -1144,7 +1129,7 @@ static void uhci_frame_timer(void *opaque)
/* Start new frame */
s->frnum = (s->frnum + 1) & 0x7ff;
- DPRINTF("uhci: new frame #%u\n" , s->frnum);
+ trace_usb_uhci_frame_start(s->frnum);
uhci_async_validate_begin(s);
@@ -1391,18 +1376,3 @@ static void uhci_register_types(void)
}
type_init(uhci_register_types)
-
-void usb_uhci_piix3_init(PCIBus *bus, int devfn)
-{
- pci_create_simple(bus, devfn, "piix3-usb-uhci");
-}
-
-void usb_uhci_piix4_init(PCIBus *bus, int devfn)
-{
- pci_create_simple(bus, devfn, "piix4-usb-uhci");
-}
-
-void usb_uhci_vt82c686b_init(PCIBus *bus, int devfn)
-{
- pci_create_simple(bus, devfn, "vt82c686b-usb-uhci");
-}
diff --git a/hw/usb-xhci.c b/hw/usb/hcd-xhci.c
index e8f1b6e3a5..73b0c7f5e5 100644
--- a/hw/usb-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -18,12 +18,12 @@
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
-#include "hw.h"
+#include "hw/hw.h"
#include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
-#include "qdev-addr.h"
-#include "msi.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
+#include "hw/qdev-addr.h"
+#include "hw/msi.h"
//#define DEBUG_XHCI
//#define DEBUG_DATA
diff --git a/hw/usb/host-bsd.c b/hw/usb/host-bsd.c
new file mode 100644
index 0000000000..ec26266620
--- /dev/null
+++ b/hw/usb/host-bsd.c
@@ -0,0 +1,647 @@
+/*
+ * BSD host USB redirector
+ *
+ * Copyright (c) 2006 Lonnie Mendez
+ * Portions of code and concepts borrowed from
+ * usb-linux.c and libusb's bsd.c and are copyright their respective owners.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "monitor.h"
+#include "hw/usb.h"
+
+/* usb.h declares these */
+#undef USB_SPEED_HIGH
+#undef USB_SPEED_FULL
+#undef USB_SPEED_LOW
+
+#include <sys/ioctl.h>
+#ifndef __DragonFly__
+#include <dev/usb/usb.h>
+#else
+#include <bus/usb/usb.h>
+#endif
+
+/* This value has maximum potential at 16.
+ * You should also set hw.usb.debug to gain
+ * more detailed view.
+ */
+//#define DEBUG
+#define UGEN_DEBUG_LEVEL 0
+
+
+typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id,
+ int vendor_id, int product_id,
+ const char *product_name, int speed);
+static int usb_host_find_device(int *pbus_num, int *paddr,
+ const char *devname);
+
+typedef struct USBHostDevice {
+ USBDevice dev;
+ int ep_fd[USB_MAX_ENDPOINTS];
+ int devfd;
+ char devpath[32];
+} USBHostDevice;
+
+
+static int ensure_ep_open(USBHostDevice *dev, int ep, int mode)
+{
+ char buf[32];
+ int fd;
+
+ /* Get the address for this endpoint */
+ ep = UE_GET_ADDR(ep);
+
+ if (dev->ep_fd[ep] < 0) {
+#if defined(__FreeBSD__) || defined(__DragonFly__)
+ snprintf(buf, sizeof(buf) - 1, "%s.%d", dev->devpath, ep);
+#else
+ snprintf(buf, sizeof(buf) - 1, "%s.%02d", dev->devpath, ep);
+#endif
+ /* Try to open it O_RDWR first for those devices which have in and out
+ * endpoints with the same address (eg 0x02 and 0x82)
+ */
+ fd = open(buf, O_RDWR);
+ if (fd < 0 && errno == ENXIO)
+ fd = open(buf, mode);
+ if (fd < 0) {
+#ifdef DEBUG
+ printf("ensure_ep_open: failed to open device endpoint %s: %s\n",
+ buf, strerror(errno));
+#endif
+ }
+ dev->ep_fd[ep] = fd;
+ }
+
+ return dev->ep_fd[ep];
+}
+
+static void ensure_eps_closed(USBHostDevice *dev)
+{
+ int epnum = 1;
+
+ if (!dev)
+ return;
+
+ while (epnum < USB_MAX_ENDPOINTS) {
+ if (dev->ep_fd[epnum] >= 0) {
+ close(dev->ep_fd[epnum]);
+ dev->ep_fd[epnum] = -1;
+ }
+ epnum++;
+ }
+}
+
+static void usb_host_handle_reset(USBDevice *dev)
+{
+#if 0
+ USBHostDevice *s = (USBHostDevice *)dev;
+#endif
+}
+
+/* XXX:
+ * -check device states against transfer requests
+ * and return appropriate response
+ */
+static int usb_host_handle_control(USBDevice *dev,
+ USBPacket *p,
+ int request,
+ int value,
+ int index,
+ int length,
+ uint8_t *data)
+{
+ USBHostDevice *s = (USBHostDevice *)dev;
+ struct usb_ctl_request req;
+ struct usb_alt_interface aiface;
+ int ret, timeout = 50;
+
+ if ((request >> 8) == UT_WRITE_DEVICE &&
+ (request & 0xff) == UR_SET_ADDRESS) {
+
+ /* specific SET_ADDRESS support */
+ dev->addr = value;
+ return 0;
+ } else if ((request >> 8) == UT_WRITE_DEVICE &&
+ (request & 0xff) == UR_SET_CONFIG) {
+
+ ensure_eps_closed(s); /* can't do this without all eps closed */
+
+ ret = ioctl(s->devfd, USB_SET_CONFIG, &value);
+ if (ret < 0) {
+#ifdef DEBUG
+ printf("handle_control: failed to set configuration - %s\n",
+ strerror(errno));
+#endif
+ return USB_RET_STALL;
+ }
+
+ return 0;
+ } else if ((request >> 8) == UT_WRITE_INTERFACE &&
+ (request & 0xff) == UR_SET_INTERFACE) {
+
+ aiface.uai_interface_index = index;
+ aiface.uai_alt_no = value;
+
+ ensure_eps_closed(s); /* can't do this without all eps closed */
+ ret = ioctl(s->devfd, USB_SET_ALTINTERFACE, &aiface);
+ if (ret < 0) {
+#ifdef DEBUG
+ printf("handle_control: failed to set alternate interface - %s\n",
+ strerror(errno));
+#endif
+ return USB_RET_STALL;
+ }
+
+ return 0;
+ } else {
+ req.ucr_request.bmRequestType = request >> 8;
+ req.ucr_request.bRequest = request & 0xff;
+ USETW(req.ucr_request.wValue, value);
+ USETW(req.ucr_request.wIndex, index);
+ USETW(req.ucr_request.wLength, length);
+ req.ucr_data = data;
+ req.ucr_flags = USBD_SHORT_XFER_OK;
+
+ ret = ioctl(s->devfd, USB_SET_TIMEOUT, &timeout);
+#if defined(__NetBSD__) || defined(__OpenBSD__)
+ if (ret < 0 && errno != EINVAL) {
+#else
+ if (ret < 0) {
+#endif
+#ifdef DEBUG
+ printf("handle_control: setting timeout failed - %s\n",
+ strerror(errno));
+#endif
+ }
+
+ ret = ioctl(s->devfd, USB_DO_REQUEST, &req);
+ /* ugen returns EIO for usbd_do_request_ no matter what
+ * happens with the transfer */
+ if (ret < 0) {
+#ifdef DEBUG
+ printf("handle_control: error after request - %s\n",
+ strerror(errno));
+#endif
+ return USB_RET_NAK; // STALL
+ } else {
+ return req.ucr_actlen;
+ }
+ }
+}
+
+static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = (USBHostDevice *)dev;
+ int ret, fd, mode;
+ int one = 1, shortpacket = 0, timeout = 50;
+ sigset_t new_mask, old_mask;
+ uint8_t devep = p->ep->nr;
+
+ /* protect data transfers from SIGALRM signal */
+ sigemptyset(&new_mask);
+ sigaddset(&new_mask, SIGALRM);
+ sigprocmask(SIG_BLOCK, &new_mask, &old_mask);
+
+ if (p->pid == USB_TOKEN_IN) {
+ devep |= 0x80;
+ mode = O_RDONLY;
+ shortpacket = 1;
+ } else {
+ mode = O_WRONLY;
+ }
+
+ fd = ensure_ep_open(s, devep, mode);
+ if (fd < 0) {
+ sigprocmask(SIG_SETMASK, &old_mask, NULL);
+ return USB_RET_NODEV;
+ }
+
+ if (ioctl(fd, USB_SET_TIMEOUT, &timeout) < 0) {
+#ifdef DEBUG
+ printf("handle_data: failed to set timeout - %s\n",
+ strerror(errno));
+#endif
+ }
+
+ if (shortpacket) {
+ if (ioctl(fd, USB_SET_SHORT_XFER, &one) < 0) {
+#ifdef DEBUG
+ printf("handle_data: failed to set short xfer mode - %s\n",
+ strerror(errno));
+#endif
+ sigprocmask(SIG_SETMASK, &old_mask, NULL);
+ }
+ }
+
+ if (p->pid == USB_TOKEN_IN)
+ ret = readv(fd, p->iov.iov, p->iov.niov);
+ else
+ ret = writev(fd, p->iov.iov, p->iov.niov);
+
+ sigprocmask(SIG_SETMASK, &old_mask, NULL);
+
+ if (ret < 0) {
+#ifdef DEBUG
+ printf("handle_data: error after %s data - %s\n",
+ pid == USB_TOKEN_IN ? "reading" : "writing", strerror(errno));
+#endif
+ switch(errno) {
+ case ETIMEDOUT:
+ case EINTR:
+ return USB_RET_NAK;
+ default:
+ return USB_RET_STALL;
+ }
+ } else {
+ return ret;
+ }
+}
+
+static void usb_host_handle_destroy(USBDevice *opaque)
+{
+ USBHostDevice *s = (USBHostDevice *)opaque;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ if (s->ep_fd[i] >= 0)
+ close(s->ep_fd[i]);
+
+ if (s->devfd < 0)
+ return;
+
+ close(s->devfd);
+
+ g_free(s);
+}
+
+static int usb_host_initfn(USBDevice *dev)
+{
+ return 0;
+}
+
+USBDevice *usb_host_device_open(USBBus *guest_bus, const char *devname)
+{
+ struct usb_device_info bus_info, dev_info;
+ USBDevice *d = NULL, *ret = NULL;
+ USBHostDevice *dev;
+ char ctlpath[PATH_MAX + 1];
+ char buspath[PATH_MAX + 1];
+ int bfd, dfd, bus, address, i;
+ int ugendebug = UGEN_DEBUG_LEVEL;
+
+ if (usb_host_find_device(&bus, &address, devname) < 0) {
+ goto fail;
+ }
+
+ snprintf(buspath, PATH_MAX, "/dev/usb%d", bus);
+
+ bfd = open(buspath, O_RDWR);
+ if (bfd < 0) {
+#ifdef DEBUG
+ printf("usb_host_device_open: failed to open usb bus - %s\n",
+ strerror(errno));
+#endif
+ goto fail;
+ }
+
+ bus_info.udi_addr = address;
+ if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0) {
+#ifdef DEBUG
+ printf("usb_host_device_open: failed to grab bus information - %s\n",
+ strerror(errno));
+#endif
+ goto fail_bfd;
+ }
+
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+ snprintf(ctlpath, PATH_MAX, "/dev/%s", bus_info.udi_devnames[0]);
+#else
+ snprintf(ctlpath, PATH_MAX, "/dev/%s.00", bus_info.udi_devnames[0]);
+#endif
+
+ dfd = open(ctlpath, O_RDWR);
+ if (dfd < 0) {
+ dfd = open(ctlpath, O_RDONLY);
+ if (dfd < 0) {
+#ifdef DEBUG
+ printf("usb_host_device_open: failed to open usb device %s - %s\n",
+ ctlpath, strerror(errno));
+#endif
+ }
+ goto fail_dfd;
+ }
+
+ if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0) {
+#ifdef DEBUG
+ printf("usb_host_device_open: failed to grab device info - %s\n",
+ strerror(errno));
+#endif
+ goto fail_dfd;
+ }
+
+ d = usb_create(guest_bus, "usb-host");
+ dev = DO_UPCAST(USBHostDevice, dev, d);
+
+ if (dev_info.udi_speed == 1) {
+ dev->dev.speed = USB_SPEED_LOW - 1;
+ dev->dev.speedmask = USB_SPEED_MASK_LOW;
+ } else {
+ dev->dev.speed = USB_SPEED_FULL - 1;
+ dev->dev.speedmask = USB_SPEED_MASK_FULL;
+ }
+
+ if (strncmp(dev_info.udi_product, "product", 7) != 0) {
+ pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+ dev_info.udi_product);
+ } else {
+ snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+ "host:%s", devname);
+ }
+
+ pstrcpy(dev->devpath, sizeof(dev->devpath), "/dev/");
+ pstrcat(dev->devpath, sizeof(dev->devpath), dev_info.udi_devnames[0]);
+
+ /* Mark the endpoints as not yet open */
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+ dev->ep_fd[i] = -1;
+ }
+
+ ioctl(dfd, USB_SETDEBUG, &ugendebug);
+
+ ret = (USBDevice *)dev;
+
+fail_dfd:
+ close(dfd);
+fail_bfd:
+ close(bfd);
+fail:
+ return ret;
+}
+
+static void usb_host_class_initfn(ObjectClass *klass, void *data)
+{
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+ uc->product_desc = "USB Host Device";
+ uc->init = usb_host_initfn;
+ uc->handle_reset = usb_host_handle_reset;
+ uc->handle_control = usb_host_handle_control;
+ uc->handle_data = usb_host_handle_data;
+ uc->handle_destroy = usb_host_handle_destroy;
+}
+
+static TypeInfo usb_host_dev_info = {
+ .name = "usb-host",
+ .parent = TYPE_USB_DEVICE,
+ .instance_size = sizeof(USBHostDevice),
+ .class_init = usb_host_class_initfn,
+};
+
+static void usb_host_register_types(void)
+{
+ type_register_static(&usb_host_dev_info);
+}
+
+type_init(usb_host_register_types)
+
+static int usb_host_scan(void *opaque, USBScanFunc *func)
+{
+ struct usb_device_info bus_info;
+ struct usb_device_info dev_info;
+ uint16_t vendor_id, product_id, class_id, speed;
+ int bfd, dfd, bus, address;
+ char busbuf[20], devbuf[20], product_name[256];
+ int ret = 0;
+
+ for (bus = 0; bus < 10; bus++) {
+
+ snprintf(busbuf, sizeof(busbuf) - 1, "/dev/usb%d", bus);
+ bfd = open(busbuf, O_RDWR);
+ if (bfd < 0)
+ continue;
+
+ for (address = 1; address < 127; address++) {
+
+ bus_info.udi_addr = address;
+ if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0)
+ continue;
+
+ /* only list devices that can be used by generic layer */
+ if (strncmp(bus_info.udi_devnames[0], "ugen", 4) != 0)
+ continue;
+
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+ snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s", bus_info.udi_devnames[0]);
+#else
+ snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s.00", bus_info.udi_devnames[0]);
+#endif
+
+ dfd = open(devbuf, O_RDONLY);
+ if (dfd < 0) {
+#ifdef DEBUG
+ printf("usb_host_scan: couldn't open device %s - %s\n", devbuf,
+ strerror(errno));
+#endif
+ continue;
+ }
+
+ if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0)
+ printf("usb_host_scan: couldn't get device information for %s - %s\n",
+ devbuf, strerror(errno));
+
+ /* XXX: might need to fixup endianness of word values before copying over */
+
+ vendor_id = dev_info.udi_vendorNo;
+ product_id = dev_info.udi_productNo;
+ class_id = dev_info.udi_class;
+ speed = dev_info.udi_speed;
+
+ if (strncmp(dev_info.udi_product, "product", 7) != 0)
+ pstrcpy(product_name, sizeof(product_name),
+ dev_info.udi_product);
+ else
+ product_name[0] = '\0';
+
+ ret = func(opaque, bus, address, class_id, vendor_id,
+ product_id, product_name, speed);
+
+ close(dfd);
+
+ if (ret)
+ goto the_end;
+ }
+
+ close(bfd);
+ }
+
+the_end:
+ return ret;
+}
+
+typedef struct FindDeviceState {
+ int vendor_id;
+ int product_id;
+ int bus_num;
+ int addr;
+} FindDeviceState;
+
+static int usb_host_find_device_scan(void *opaque, int bus_num, int addr,
+ int class_id,
+ int vendor_id, int product_id,
+ const char *product_name, int speed)
+{
+ FindDeviceState *s = opaque;
+ if (vendor_id == s->vendor_id &&
+ product_id == s->product_id) {
+ s->bus_num = bus_num;
+ s->addr = addr;
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+
+/* the syntax is :
+ 'bus.addr' (decimal numbers) or
+ 'vendor_id:product_id' (hexa numbers) */
+static int usb_host_find_device(int *pbus_num, int *paddr,
+ const char *devname)
+{
+ const char *p;
+ int ret;
+ FindDeviceState fs;
+
+ p = strchr(devname, '.');
+ if (p) {
+ *pbus_num = strtoul(devname, NULL, 0);
+ *paddr = strtoul(p + 1, NULL, 0);
+ return 0;
+ }
+ p = strchr(devname, ':');
+ if (p) {
+ fs.vendor_id = strtoul(devname, NULL, 16);
+ fs.product_id = strtoul(p + 1, NULL, 16);
+ ret = usb_host_scan(&fs, usb_host_find_device_scan);
+ if (ret) {
+ *pbus_num = fs.bus_num;
+ *paddr = fs.addr;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+/**********************/
+/* USB host device info */
+
+struct usb_class_info {
+ int class;
+ const char *class_name;
+};
+
+static const struct usb_class_info usb_class_info[] = {
+ { USB_CLASS_AUDIO, "Audio"},
+ { USB_CLASS_COMM, "Communication"},
+ { USB_CLASS_HID, "HID"},
+ { USB_CLASS_HUB, "Hub" },
+ { USB_CLASS_PHYSICAL, "Physical" },
+ { USB_CLASS_PRINTER, "Printer" },
+ { USB_CLASS_MASS_STORAGE, "Storage" },
+ { USB_CLASS_CDC_DATA, "Data" },
+ { USB_CLASS_APP_SPEC, "Application Specific" },
+ { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
+ { USB_CLASS_STILL_IMAGE, "Still Image" },
+ { USB_CLASS_CSCID, "Smart Card" },
+ { USB_CLASS_CONTENT_SEC, "Content Security" },
+ { -1, NULL }
+};
+
+static const char *usb_class_str(uint8_t class)
+{
+ const struct usb_class_info *p;
+ for (p = usb_class_info; p->class != -1; p++) {
+ if (p->class == class)
+ break;
+ }
+ return p->class_name;
+}
+
+static void usb_info_device(Monitor *mon, int bus_num, int addr, int class_id,
+ int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ const char *class_str, *speed_str;
+
+ switch(speed) {
+ case USB_SPEED_LOW:
+ speed_str = "1.5";
+ break;
+ case USB_SPEED_FULL:
+ speed_str = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed_str = "480";
+ break;
+ default:
+ speed_str = "?";
+ break;
+ }
+
+ monitor_printf(mon, " Device %d.%d, speed %s Mb/s\n",
+ bus_num, addr, speed_str);
+ class_str = usb_class_str(class_id);
+ if (class_str)
+ monitor_printf(mon, " %s:", class_str);
+ else
+ monitor_printf(mon, " Class %02x:", class_id);
+ monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
+ if (product_name[0] != '\0')
+ monitor_printf(mon, ", %s", product_name);
+ monitor_printf(mon, "\n");
+}
+
+static int usb_host_info_device(void *opaque,
+ int bus_num, int addr,
+ int class_id,
+ int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ Monitor *mon = opaque;
+
+ usb_info_device(mon, bus_num, addr, class_id, vendor_id, product_id,
+ product_name, speed);
+ return 0;
+}
+
+void usb_host_info(Monitor *mon)
+{
+ usb_host_scan(mon, usb_host_info_device);
+}
+
+/* XXX add this */
+int usb_host_device_close(const char *devname)
+{
+ return 0;
+}
diff --git a/hw/usb/host-linux.c b/hw/usb/host-linux.c
new file mode 100644
index 0000000000..90919c242a
--- /dev/null
+++ b/hw/usb/host-linux.c
@@ -0,0 +1,1913 @@
+/*
+ * Linux host USB redirector
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ * Support for host device auto connect & disconnect
+ * Major rewrite to support fully async operation
+ *
+ * Copyright 2008 TJ <linux@tjworld.net>
+ * Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
+ * to the legacy /proc/bus/usb USB device discovery and handling
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "monitor.h"
+#include "sysemu.h"
+#include "trace.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+
+#include <linux/usbdevice_fs.h>
+#include <linux/version.h>
+#include "hw/usb.h"
+
+/* We redefine it to avoid version problems */
+struct usb_ctrltransfer {
+ uint8_t bRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+ uint32_t timeout;
+ void *data;
+};
+
+typedef int USBScanFunc(void *opaque, int bus_num, int addr, const char *port,
+ int class_id, int vendor_id, int product_id,
+ const char *product_name, int speed);
+
+//#define DEBUG
+
+#ifdef DEBUG
+#define DPRINTF printf
+#else
+#define DPRINTF(...)
+#endif
+
+#define PRODUCT_NAME_SZ 32
+#define MAX_PORTLEN 16
+
+/* endpoint association data */
+#define ISO_FRAME_DESC_PER_URB 32
+
+/* devio.c limits single requests to 16k */
+#define MAX_USBFS_BUFFER_SIZE 16384
+
+typedef struct AsyncURB AsyncURB;
+
+struct endp_data {
+ uint8_t halted;
+ uint8_t iso_started;
+ AsyncURB *iso_urb;
+ int iso_urb_idx;
+ int iso_buffer_used;
+ int inflight;
+};
+
+struct USBAutoFilter {
+ uint32_t bus_num;
+ uint32_t addr;
+ char *port;
+ uint32_t vendor_id;
+ uint32_t product_id;
+};
+
+typedef struct USBHostDevice {
+ USBDevice dev;
+ int fd;
+ int hub_fd;
+ int hub_port;
+
+ uint8_t descr[8192];
+ int descr_len;
+ int closing;
+ uint32_t iso_urb_count;
+ Notifier exit;
+
+ struct endp_data ep_in[USB_MAX_ENDPOINTS];
+ struct endp_data ep_out[USB_MAX_ENDPOINTS];
+ QLIST_HEAD(, AsyncURB) aurbs;
+
+ /* Host side address */
+ int bus_num;
+ int addr;
+ char port[MAX_PORTLEN];
+ struct USBAutoFilter match;
+ int seen, errcount;
+
+ QTAILQ_ENTRY(USBHostDevice) next;
+} USBHostDevice;
+
+static QTAILQ_HEAD(, USBHostDevice) hostdevs = QTAILQ_HEAD_INITIALIZER(hostdevs);
+
+static int usb_host_close(USBHostDevice *dev);
+static int parse_filter(const char *spec, struct USBAutoFilter *f);
+static void usb_host_auto_check(void *unused);
+static int usb_host_read_file(char *line, size_t line_size,
+ const char *device_file, const char *device_name);
+static int usb_linux_update_endp_table(USBHostDevice *s);
+
+static int usb_host_usbfs_type(USBHostDevice *s, USBPacket *p)
+{
+ static const int usbfs[] = {
+ [USB_ENDPOINT_XFER_CONTROL] = USBDEVFS_URB_TYPE_CONTROL,
+ [USB_ENDPOINT_XFER_ISOC] = USBDEVFS_URB_TYPE_ISO,
+ [USB_ENDPOINT_XFER_BULK] = USBDEVFS_URB_TYPE_BULK,
+ [USB_ENDPOINT_XFER_INT] = USBDEVFS_URB_TYPE_INTERRUPT,
+ };
+ uint8_t type = p->ep->type;
+ assert(type < ARRAY_SIZE(usbfs));
+ return usbfs[type];
+}
+
+static int usb_host_do_reset(USBHostDevice *dev)
+{
+ struct timeval s, e;
+ uint32_t usecs;
+ int ret;
+
+ gettimeofday(&s, NULL);
+ ret = ioctl(dev->fd, USBDEVFS_RESET);
+ gettimeofday(&e, NULL);
+ usecs = (e.tv_sec - s.tv_sec) * 1000000;
+ usecs += e.tv_usec - s.tv_usec;
+ if (usecs > 1000000) {
+ /* more than a second, something is fishy, broken usb device? */
+ fprintf(stderr, "husb: device %d:%d reset took %d.%06d seconds\n",
+ dev->bus_num, dev->addr, usecs / 1000000, usecs % 1000000);
+ }
+ return ret;
+}
+
+static struct endp_data *get_endp(USBHostDevice *s, int pid, int ep)
+{
+ struct endp_data *eps = pid == USB_TOKEN_IN ? s->ep_in : s->ep_out;
+ assert(pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT);
+ assert(ep > 0 && ep <= USB_MAX_ENDPOINTS);
+ return eps + ep - 1;
+}
+
+static int is_isoc(USBHostDevice *s, int pid, int ep)
+{
+ return usb_ep_get_type(&s->dev, pid, ep) == USB_ENDPOINT_XFER_ISOC;
+}
+
+static int is_valid(USBHostDevice *s, int pid, int ep)
+{
+ return usb_ep_get_type(&s->dev, pid, ep) != USB_ENDPOINT_XFER_INVALID;
+}
+
+static int is_halted(USBHostDevice *s, int pid, int ep)
+{
+ return get_endp(s, pid, ep)->halted;
+}
+
+static void clear_halt(USBHostDevice *s, int pid, int ep)
+{
+ trace_usb_host_ep_clear_halt(s->bus_num, s->addr, ep);
+ get_endp(s, pid, ep)->halted = 0;
+}
+
+static void set_halt(USBHostDevice *s, int pid, int ep)
+{
+ if (ep != 0) {
+ trace_usb_host_ep_set_halt(s->bus_num, s->addr, ep);
+ get_endp(s, pid, ep)->halted = 1;
+ }
+}
+
+static int is_iso_started(USBHostDevice *s, int pid, int ep)
+{
+ return get_endp(s, pid, ep)->iso_started;
+}
+
+static void clear_iso_started(USBHostDevice *s, int pid, int ep)
+{
+ trace_usb_host_ep_stop_iso(s->bus_num, s->addr, ep);
+ get_endp(s, pid, ep)->iso_started = 0;
+}
+
+static void set_iso_started(USBHostDevice *s, int pid, int ep)
+{
+ struct endp_data *e = get_endp(s, pid, ep);
+
+ trace_usb_host_ep_start_iso(s->bus_num, s->addr, ep);
+ if (!e->iso_started) {
+ e->iso_started = 1;
+ e->inflight = 0;
+ }
+}
+
+static int change_iso_inflight(USBHostDevice *s, int pid, int ep, int value)
+{
+ struct endp_data *e = get_endp(s, pid, ep);
+
+ e->inflight += value;
+ return e->inflight;
+}
+
+static void set_iso_urb(USBHostDevice *s, int pid, int ep, AsyncURB *iso_urb)
+{
+ get_endp(s, pid, ep)->iso_urb = iso_urb;
+}
+
+static AsyncURB *get_iso_urb(USBHostDevice *s, int pid, int ep)
+{
+ return get_endp(s, pid, ep)->iso_urb;
+}
+
+static void set_iso_urb_idx(USBHostDevice *s, int pid, int ep, int i)
+{
+ get_endp(s, pid, ep)->iso_urb_idx = i;
+}
+
+static int get_iso_urb_idx(USBHostDevice *s, int pid, int ep)
+{
+ return get_endp(s, pid, ep)->iso_urb_idx;
+}
+
+static void set_iso_buffer_used(USBHostDevice *s, int pid, int ep, int i)
+{
+ get_endp(s, pid, ep)->iso_buffer_used = i;
+}
+
+static int get_iso_buffer_used(USBHostDevice *s, int pid, int ep)
+{
+ return get_endp(s, pid, ep)->iso_buffer_used;
+}
+
+/*
+ * Async URB state.
+ * We always allocate iso packet descriptors even for bulk transfers
+ * to simplify allocation and casts.
+ */
+struct AsyncURB
+{
+ struct usbdevfs_urb urb;
+ struct usbdevfs_iso_packet_desc isocpd[ISO_FRAME_DESC_PER_URB];
+ USBHostDevice *hdev;
+ QLIST_ENTRY(AsyncURB) next;
+
+ /* For regular async urbs */
+ USBPacket *packet;
+ int more; /* large transfer, more urbs follow */
+
+ /* For buffered iso handling */
+ int iso_frame_idx; /* -1 means in flight */
+};
+
+static AsyncURB *async_alloc(USBHostDevice *s)
+{
+ AsyncURB *aurb = g_malloc0(sizeof(AsyncURB));
+ aurb->hdev = s;
+ QLIST_INSERT_HEAD(&s->aurbs, aurb, next);
+ return aurb;
+}
+
+static void async_free(AsyncURB *aurb)
+{
+ QLIST_REMOVE(aurb, next);
+ g_free(aurb);
+}
+
+static void do_disconnect(USBHostDevice *s)
+{
+ usb_host_close(s);
+ usb_host_auto_check(NULL);
+}
+
+static void async_complete(void *opaque)
+{
+ USBHostDevice *s = opaque;
+ AsyncURB *aurb;
+ int urbs = 0;
+
+ while (1) {
+ USBPacket *p;
+
+ int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb);
+ if (r < 0) {
+ if (errno == EAGAIN) {
+ if (urbs > 2) {
+ fprintf(stderr, "husb: %d iso urbs finished at once\n", urbs);
+ }
+ return;
+ }
+ if (errno == ENODEV) {
+ if (!s->closing) {
+ trace_usb_host_disconnect(s->bus_num, s->addr);
+ do_disconnect(s);
+ }
+ return;
+ }
+
+ perror("USBDEVFS_REAPURBNDELAY");
+ return;
+ }
+
+ DPRINTF("husb: async completed. aurb %p status %d alen %d\n",
+ aurb, aurb->urb.status, aurb->urb.actual_length);
+
+ /* If this is a buffered iso urb mark it as complete and don't do
+ anything else (it is handled further in usb_host_handle_iso_data) */
+ if (aurb->iso_frame_idx == -1) {
+ int inflight;
+ int pid = (aurb->urb.endpoint & USB_DIR_IN) ?
+ USB_TOKEN_IN : USB_TOKEN_OUT;
+ int ep = aurb->urb.endpoint & 0xf;
+ if (aurb->urb.status == -EPIPE) {
+ set_halt(s, pid, ep);
+ }
+ aurb->iso_frame_idx = 0;
+ urbs++;
+ inflight = change_iso_inflight(s, pid, ep, -1);
+ if (inflight == 0 && is_iso_started(s, pid, ep)) {
+ fprintf(stderr, "husb: out of buffers for iso stream\n");
+ }
+ continue;
+ }
+
+ p = aurb->packet;
+ trace_usb_host_urb_complete(s->bus_num, s->addr, aurb, aurb->urb.status,
+ aurb->urb.actual_length, aurb->more);
+
+ if (p) {
+ switch (aurb->urb.status) {
+ case 0:
+ p->result += aurb->urb.actual_length;
+ break;
+
+ case -EPIPE:
+ set_halt(s, p->pid, p->ep->nr);
+ p->result = USB_RET_STALL;
+ break;
+
+ case -EOVERFLOW:
+ p->result = USB_RET_BABBLE;
+ break;
+
+ default:
+ p->result = USB_RET_IOERROR;
+ break;
+ }
+
+ if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL) {
+ trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
+ usb_generic_async_ctrl_complete(&s->dev, p);
+ } else if (!aurb->more) {
+ trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
+ usb_packet_complete(&s->dev, p);
+ }
+ }
+
+ async_free(aurb);
+ }
+}
+
+static void usb_host_async_cancel(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+ AsyncURB *aurb;
+
+ QLIST_FOREACH(aurb, &s->aurbs, next) {
+ if (p != aurb->packet) {
+ continue;
+ }
+
+ DPRINTF("husb: async cancel: packet %p, aurb %p\n", p, aurb);
+
+ /* Mark it as dead (see async_complete above) */
+ aurb->packet = NULL;
+
+ int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb);
+ if (r < 0) {
+ DPRINTF("husb: async. discard urb failed errno %d\n", errno);
+ }
+ }
+}
+
+static int usb_host_open_device(int bus, int addr)
+{
+ const char *usbfs = NULL;
+ char filename[32];
+ struct stat st;
+ int fd, rc;
+
+ rc = stat("/dev/bus/usb", &st);
+ if (rc == 0 && S_ISDIR(st.st_mode)) {
+ /* udev-created device nodes available */
+ usbfs = "/dev/bus/usb";
+ } else {
+ /* fallback: usbfs mounted below /proc */
+ usbfs = "/proc/bus/usb";
+ }
+
+ snprintf(filename, sizeof(filename), "%s/%03d/%03d",
+ usbfs, bus, addr);
+ fd = open(filename, O_RDWR | O_NONBLOCK);
+ if (fd < 0) {
+ fprintf(stderr, "husb: open %s: %s\n", filename, strerror(errno));
+ }
+ return fd;
+}
+
+static int usb_host_claim_port(USBHostDevice *s)
+{
+#ifdef USBDEVFS_CLAIM_PORT
+ char *h, hub_name[64], line[1024];
+ int hub_addr, ret;
+
+ snprintf(hub_name, sizeof(hub_name), "%d-%s",
+ s->match.bus_num, s->match.port);
+
+ /* try strip off last ".$portnr" to get hub */
+ h = strrchr(hub_name, '.');
+ if (h != NULL) {
+ s->hub_port = atoi(h+1);
+ *h = '\0';
+ } else {
+ /* no dot in there -> it is the root hub */
+ snprintf(hub_name, sizeof(hub_name), "usb%d",
+ s->match.bus_num);
+ s->hub_port = atoi(s->match.port);
+ }
+
+ if (!usb_host_read_file(line, sizeof(line), "devnum",
+ hub_name)) {
+ return -1;
+ }
+ if (sscanf(line, "%d", &hub_addr) != 1) {
+ return -1;
+ }
+
+ s->hub_fd = usb_host_open_device(s->match.bus_num, hub_addr);
+ if (s->hub_fd < 0) {
+ return -1;
+ }
+
+ ret = ioctl(s->hub_fd, USBDEVFS_CLAIM_PORT, &s->hub_port);
+ if (ret < 0) {
+ close(s->hub_fd);
+ s->hub_fd = -1;
+ return -1;
+ }
+
+ trace_usb_host_claim_port(s->match.bus_num, hub_addr, s->hub_port);
+ return 0;
+#else
+ return -1;
+#endif
+}
+
+static void usb_host_release_port(USBHostDevice *s)
+{
+ if (s->hub_fd == -1) {
+ return;
+ }
+#ifdef USBDEVFS_RELEASE_PORT
+ ioctl(s->hub_fd, USBDEVFS_RELEASE_PORT, &s->hub_port);
+#endif
+ close(s->hub_fd);
+ s->hub_fd = -1;
+}
+
+static int usb_host_disconnect_ifaces(USBHostDevice *dev, int nb_interfaces)
+{
+ /* earlier Linux 2.4 do not support that */
+#ifdef USBDEVFS_DISCONNECT
+ struct usbdevfs_ioctl ctrl;
+ int ret, interface;
+
+ for (interface = 0; interface < nb_interfaces; interface++) {
+ ctrl.ioctl_code = USBDEVFS_DISCONNECT;
+ ctrl.ifno = interface;
+ ctrl.data = 0;
+ ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl);
+ if (ret < 0 && errno != ENODATA) {
+ perror("USBDEVFS_DISCONNECT");
+ return -1;
+ }
+ }
+#endif
+ return 0;
+}
+
+static int usb_linux_get_num_interfaces(USBHostDevice *s)
+{
+ char device_name[64], line[1024];
+ int num_interfaces = 0;
+
+ sprintf(device_name, "%d-%s", s->bus_num, s->port);
+ if (!usb_host_read_file(line, sizeof(line), "bNumInterfaces",
+ device_name)) {
+ return -1;
+ }
+ if (sscanf(line, "%d", &num_interfaces) != 1) {
+ return -1;
+ }
+ return num_interfaces;
+}
+
+static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
+{
+ const char *op = NULL;
+ int dev_descr_len, config_descr_len;
+ int interface, nb_interfaces;
+ int ret, i;
+
+ for (i = 0; i < USB_MAX_INTERFACES; i++) {
+ dev->dev.altsetting[i] = 0;
+ }
+
+ if (configuration == 0) { /* address state - ignore */
+ dev->dev.ninterfaces = 0;
+ dev->dev.configuration = 0;
+ return 1;
+ }
+
+ DPRINTF("husb: claiming interfaces. config %d\n", configuration);
+
+ i = 0;
+ dev_descr_len = dev->descr[0];
+ if (dev_descr_len > dev->descr_len) {
+ fprintf(stderr, "husb: update iface failed. descr too short\n");
+ return 0;
+ }
+
+ i += dev_descr_len;
+ while (i < dev->descr_len) {
+ DPRINTF("husb: i is %d, descr_len is %d, dl %d, dt %d\n",
+ i, dev->descr_len,
+ dev->descr[i], dev->descr[i+1]);
+
+ if (dev->descr[i+1] != USB_DT_CONFIG) {
+ i += dev->descr[i];
+ continue;
+ }
+ config_descr_len = dev->descr[i];
+
+ DPRINTF("husb: config #%d need %d\n", dev->descr[i + 5], configuration);
+
+ if (configuration == dev->descr[i + 5]) {
+ configuration = dev->descr[i + 5];
+ break;
+ }
+
+ i += config_descr_len;
+ }
+
+ if (i >= dev->descr_len) {
+ fprintf(stderr,
+ "husb: update iface failed. no matching configuration\n");
+ return 0;
+ }
+ nb_interfaces = dev->descr[i + 4];
+
+ if (usb_host_disconnect_ifaces(dev, nb_interfaces) < 0) {
+ goto fail;
+ }
+
+ /* XXX: only grab if all interfaces are free */
+ for (interface = 0; interface < nb_interfaces; interface++) {
+ op = "USBDEVFS_CLAIMINTERFACE";
+ ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface);
+ if (ret < 0) {
+ goto fail;
+ }
+ }
+
+ trace_usb_host_claim_interfaces(dev->bus_num, dev->addr,
+ nb_interfaces, configuration);
+
+ dev->dev.ninterfaces = nb_interfaces;
+ dev->dev.configuration = configuration;
+ return 1;
+
+fail:
+ if (errno == ENODEV) {
+ do_disconnect(dev);
+ }
+ perror(op);
+ return 0;
+}
+
+static int usb_host_release_interfaces(USBHostDevice *s)
+{
+ int ret, i;
+
+ trace_usb_host_release_interfaces(s->bus_num, s->addr);
+
+ for (i = 0; i < s->dev.ninterfaces; i++) {
+ ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i);
+ if (ret < 0) {
+ perror("USBDEVFS_RELEASEINTERFACE");
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static void usb_host_handle_reset(USBDevice *dev)
+{
+ USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+
+ trace_usb_host_reset(s->bus_num, s->addr);
+
+ usb_host_do_reset(s);;
+
+ usb_host_claim_interfaces(s, 0);
+ usb_linux_update_endp_table(s);
+}
+
+static void usb_host_handle_destroy(USBDevice *dev)
+{
+ USBHostDevice *s = (USBHostDevice *)dev;
+
+ usb_host_release_port(s);
+ usb_host_close(s);
+ QTAILQ_REMOVE(&hostdevs, s, next);
+ qemu_remove_exit_notifier(&s->exit);
+}
+
+/* iso data is special, we need to keep enough urbs in flight to make sure
+ that the controller never runs out of them, otherwise the device will
+ likely suffer a buffer underrun / overrun. */
+static AsyncURB *usb_host_alloc_iso(USBHostDevice *s, int pid, uint8_t ep)
+{
+ AsyncURB *aurb;
+ int i, j, len = usb_ep_get_max_packet_size(&s->dev, pid, ep);
+
+ aurb = g_malloc0(s->iso_urb_count * sizeof(*aurb));
+ for (i = 0; i < s->iso_urb_count; i++) {
+ aurb[i].urb.endpoint = ep;
+ aurb[i].urb.buffer_length = ISO_FRAME_DESC_PER_URB * len;
+ aurb[i].urb.buffer = g_malloc(aurb[i].urb.buffer_length);
+ aurb[i].urb.type = USBDEVFS_URB_TYPE_ISO;
+ aurb[i].urb.flags = USBDEVFS_URB_ISO_ASAP;
+ aurb[i].urb.number_of_packets = ISO_FRAME_DESC_PER_URB;
+ for (j = 0 ; j < ISO_FRAME_DESC_PER_URB; j++)
+ aurb[i].urb.iso_frame_desc[j].length = len;
+ if (pid == USB_TOKEN_IN) {
+ aurb[i].urb.endpoint |= 0x80;
+ /* Mark as fully consumed (idle) */
+ aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB;
+ }
+ }
+ set_iso_urb(s, pid, ep, aurb);
+
+ return aurb;
+}
+
+static void usb_host_stop_n_free_iso(USBHostDevice *s, int pid, uint8_t ep)
+{
+ AsyncURB *aurb;
+ int i, ret, killed = 0, free = 1;
+
+ aurb = get_iso_urb(s, pid, ep);
+ if (!aurb) {
+ return;
+ }
+
+ for (i = 0; i < s->iso_urb_count; i++) {
+ /* in flight? */
+ if (aurb[i].iso_frame_idx == -1) {
+ ret = ioctl(s->fd, USBDEVFS_DISCARDURB, &aurb[i]);
+ if (ret < 0) {
+ perror("USBDEVFS_DISCARDURB");
+ free = 0;
+ continue;
+ }
+ killed++;
+ }
+ }
+
+ /* Make sure any urbs we've killed are reaped before we free them */
+ if (killed) {
+ async_complete(s);
+ }
+
+ for (i = 0; i < s->iso_urb_count; i++) {
+ g_free(aurb[i].urb.buffer);
+ }
+
+ if (free)
+ g_free(aurb);
+ else
+ printf("husb: leaking iso urbs because of discard failure\n");
+ set_iso_urb(s, pid, ep, NULL);
+ set_iso_urb_idx(s, pid, ep, 0);
+ clear_iso_started(s, pid, ep);
+}
+
+static int urb_status_to_usb_ret(int status)
+{
+ switch (status) {
+ case -EPIPE:
+ return USB_RET_STALL;
+ case -EOVERFLOW:
+ return USB_RET_BABBLE;
+ default:
+ return USB_RET_IOERROR;
+ }
+}
+
+static int usb_host_handle_iso_data(USBHostDevice *s, USBPacket *p, int in)
+{
+ AsyncURB *aurb;
+ int i, j, ret, max_packet_size, offset, len = 0;
+ uint8_t *buf;
+
+ max_packet_size = p->ep->max_packet_size;
+ if (max_packet_size == 0)
+ return USB_RET_NAK;
+
+ aurb = get_iso_urb(s, p->pid, p->ep->nr);
+ if (!aurb) {
+ aurb = usb_host_alloc_iso(s, p->pid, p->ep->nr);
+ }
+
+ i = get_iso_urb_idx(s, p->pid, p->ep->nr);
+ j = aurb[i].iso_frame_idx;
+ if (j >= 0 && j < ISO_FRAME_DESC_PER_URB) {
+ if (in) {
+ /* Check urb status */
+ if (aurb[i].urb.status) {
+ len = urb_status_to_usb_ret(aurb[i].urb.status);
+ /* Move to the next urb */
+ aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB - 1;
+ /* Check frame status */
+ } else if (aurb[i].urb.iso_frame_desc[j].status) {
+ len = urb_status_to_usb_ret(
+ aurb[i].urb.iso_frame_desc[j].status);
+ /* Check the frame fits */
+ } else if (aurb[i].urb.iso_frame_desc[j].actual_length
+ > p->iov.size) {
+ printf("husb: received iso data is larger then packet\n");
+ len = USB_RET_BABBLE;
+ /* All good copy data over */
+ } else {
+ len = aurb[i].urb.iso_frame_desc[j].actual_length;
+ buf = aurb[i].urb.buffer +
+ j * aurb[i].urb.iso_frame_desc[0].length;
+ usb_packet_copy(p, buf, len);
+ }
+ } else {
+ len = p->iov.size;
+ offset = (j == 0) ? 0 : get_iso_buffer_used(s, p->pid, p->ep->nr);
+
+ /* Check the frame fits */
+ if (len > max_packet_size) {
+ printf("husb: send iso data is larger then max packet size\n");
+ return USB_RET_NAK;
+ }
+
+ /* All good copy data over */
+ usb_packet_copy(p, aurb[i].urb.buffer + offset, len);
+ aurb[i].urb.iso_frame_desc[j].length = len;
+ offset += len;
+ set_iso_buffer_used(s, p->pid, p->ep->nr, offset);
+
+ /* Start the stream once we have buffered enough data */
+ if (!is_iso_started(s, p->pid, p->ep->nr) && i == 1 && j == 8) {
+ set_iso_started(s, p->pid, p->ep->nr);
+ }
+ }
+ aurb[i].iso_frame_idx++;
+ if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
+ i = (i + 1) % s->iso_urb_count;
+ set_iso_urb_idx(s, p->pid, p->ep->nr, i);
+ }
+ } else {
+ if (in) {
+ set_iso_started(s, p->pid, p->ep->nr);
+ } else {
+ DPRINTF("hubs: iso out error no free buffer, dropping packet\n");
+ }
+ }
+
+ if (is_iso_started(s, p->pid, p->ep->nr)) {
+ /* (Re)-submit all fully consumed / filled urbs */
+ for (i = 0; i < s->iso_urb_count; i++) {
+ if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
+ ret = ioctl(s->fd, USBDEVFS_SUBMITURB, &aurb[i]);
+ if (ret < 0) {
+ perror("USBDEVFS_SUBMITURB");
+ if (!in || len == 0) {
+ switch(errno) {
+ case ETIMEDOUT:
+ len = USB_RET_NAK;
+ break;
+ case EPIPE:
+ default:
+ len = USB_RET_STALL;
+ }
+ }
+ break;
+ }
+ aurb[i].iso_frame_idx = -1;
+ change_iso_inflight(s, p->pid, p->ep->nr, 1);
+ }
+ }
+ }
+
+ return len;
+}
+
+static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
+{
+ USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+ struct usbdevfs_urb *urb;
+ AsyncURB *aurb;
+ int ret, rem, prem, v;
+ uint8_t *pbuf;
+ uint8_t ep;
+
+ trace_usb_host_req_data(s->bus_num, s->addr,
+ p->pid == USB_TOKEN_IN,
+ p->ep->nr, p->iov.size);
+
+ if (!is_valid(s, p->pid, p->ep->nr)) {
+ trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+ return USB_RET_NAK;
+ }
+
+ if (p->pid == USB_TOKEN_IN) {
+ ep = p->ep->nr | 0x80;
+ } else {
+ ep = p->ep->nr;
+ }
+
+ if (is_halted(s, p->pid, p->ep->nr)) {
+ unsigned int arg = ep;
+ ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &arg);
+ if (ret < 0) {
+ perror("USBDEVFS_CLEAR_HALT");
+ trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+ return USB_RET_NAK;
+ }
+ clear_halt(s, p->pid, p->ep->nr);
+ }
+
+ if (is_isoc(s, p->pid, p->ep->nr)) {
+ return usb_host_handle_iso_data(s, p, p->pid == USB_TOKEN_IN);
+ }
+
+ v = 0;
+ prem = p->iov.iov[v].iov_len;
+ pbuf = p->iov.iov[v].iov_base;
+ rem = p->iov.size;
+ while (rem) {
+ if (prem == 0) {
+ v++;
+ assert(v < p->iov.niov);
+ prem = p->iov.iov[v].iov_len;
+ pbuf = p->iov.iov[v].iov_base;
+ assert(prem <= rem);
+ }
+ aurb = async_alloc(s);
+ aurb->packet = p;
+
+ urb = &aurb->urb;
+ urb->endpoint = ep;
+ urb->type = usb_host_usbfs_type(s, p);
+ urb->usercontext = s;
+ urb->buffer = pbuf;
+ urb->buffer_length = prem;
+
+ if (urb->buffer_length > MAX_USBFS_BUFFER_SIZE) {
+ urb->buffer_length = MAX_USBFS_BUFFER_SIZE;
+ }
+ pbuf += urb->buffer_length;
+ prem -= urb->buffer_length;
+ rem -= urb->buffer_length;
+ if (rem) {
+ aurb->more = 1;
+ }
+
+ trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
+ urb->buffer_length, aurb->more);
+ ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+ DPRINTF("husb: data submit: ep 0x%x, len %u, more %d, packet %p, aurb %p\n",
+ urb->endpoint, urb->buffer_length, aurb->more, p, aurb);
+
+ if (ret < 0) {
+ perror("USBDEVFS_SUBMITURB");
+ async_free(aurb);
+
+ switch(errno) {
+ case ETIMEDOUT:
+ trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+ return USB_RET_NAK;
+ case EPIPE:
+ default:
+ trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_STALL);
+ return USB_RET_STALL;
+ }
+ }
+ }
+
+ return USB_RET_ASYNC;
+}
+
+static int ctrl_error(void)
+{
+ if (errno == ETIMEDOUT) {
+ return USB_RET_NAK;
+ } else {
+ return USB_RET_STALL;
+ }
+}
+
+static int usb_host_set_address(USBHostDevice *s, int addr)
+{
+ trace_usb_host_set_address(s->bus_num, s->addr, addr);
+ s->dev.addr = addr;
+ return 0;
+}
+
+static int usb_host_set_config(USBHostDevice *s, int config)
+{
+ int ret, first = 1;
+
+ trace_usb_host_set_config(s->bus_num, s->addr, config);
+
+ usb_host_release_interfaces(s);
+
+again:
+ ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config);
+
+ DPRINTF("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno);
+
+ if (ret < 0 && errno == EBUSY && first) {
+ /* happens if usb device is in use by host drivers */
+ int count = usb_linux_get_num_interfaces(s);
+ if (count > 0) {
+ DPRINTF("husb: busy -> disconnecting %d interfaces\n", count);
+ usb_host_disconnect_ifaces(s, count);
+ first = 0;
+ goto again;
+ }
+ }
+
+ if (ret < 0) {
+ return ctrl_error();
+ }
+ usb_host_claim_interfaces(s, config);
+ usb_linux_update_endp_table(s);
+ return 0;
+}
+
+static int usb_host_set_interface(USBHostDevice *s, int iface, int alt)
+{
+ struct usbdevfs_setinterface si;
+ int i, ret;
+
+ trace_usb_host_set_interface(s->bus_num, s->addr, iface, alt);
+
+ for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
+ if (is_isoc(s, USB_TOKEN_IN, i)) {
+ usb_host_stop_n_free_iso(s, USB_TOKEN_IN, i);
+ }
+ if (is_isoc(s, USB_TOKEN_OUT, i)) {
+ usb_host_stop_n_free_iso(s, USB_TOKEN_OUT, i);
+ }
+ }
+
+ if (iface >= USB_MAX_INTERFACES) {
+ return USB_RET_STALL;
+ }
+
+ si.interface = iface;
+ si.altsetting = alt;
+ ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si);
+
+ DPRINTF("husb: ctrl set iface %d altset %d ret %d errno %d\n",
+ iface, alt, ret, errno);
+
+ if (ret < 0) {
+ return ctrl_error();
+ }
+
+ s->dev.altsetting[iface] = alt;
+ usb_linux_update_endp_table(s);
+ return 0;
+}
+
+static int usb_host_handle_control(USBDevice *dev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
+{
+ USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+ struct usbdevfs_urb *urb;
+ AsyncURB *aurb;
+ int ret;
+
+ /*
+ * Process certain standard device requests.
+ * These are infrequent and are processed synchronously.
+ */
+
+ /* Note request is (bRequestType << 8) | bRequest */
+ trace_usb_host_req_control(s->bus_num, s->addr, request, value, index);
+
+ switch (request) {
+ case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+ return usb_host_set_address(s, value);
+
+ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+ return usb_host_set_config(s, value & 0xff);
+
+ case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+ return usb_host_set_interface(s, index, value);
+ }
+
+ /* The rest are asynchronous */
+
+ if (length > sizeof(dev->data_buf)) {
+ fprintf(stderr, "husb: ctrl buffer too small (%d > %zu)\n",
+ length, sizeof(dev->data_buf));
+ return USB_RET_STALL;
+ }
+
+ aurb = async_alloc(s);
+ aurb->packet = p;
+
+ /*
+ * Setup ctrl transfer.
+ *
+ * s->ctrl is laid out such that data buffer immediately follows
+ * 'req' struct which is exactly what usbdevfs expects.
+ */
+ urb = &aurb->urb;
+
+ urb->type = USBDEVFS_URB_TYPE_CONTROL;
+ urb->endpoint = p->ep->nr;
+
+ urb->buffer = &dev->setup_buf;
+ urb->buffer_length = length + 8;
+
+ urb->usercontext = s;
+
+ trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
+ urb->buffer_length, aurb->more);
+ ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+ DPRINTF("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb);
+
+ if (ret < 0) {
+ DPRINTF("husb: submit failed. errno %d\n", errno);
+ async_free(aurb);
+
+ switch(errno) {
+ case ETIMEDOUT:
+ return USB_RET_NAK;
+ case EPIPE:
+ default:
+ return USB_RET_STALL;
+ }
+ }
+
+ return USB_RET_ASYNC;
+}
+
+static uint8_t usb_linux_get_alt_setting(USBHostDevice *s,
+ uint8_t configuration, uint8_t interface)
+{
+ char device_name[64], line[1024];
+ int alt_setting;
+
+ sprintf(device_name, "%d-%s:%d.%d", s->bus_num, s->port,
+ (int)configuration, (int)interface);
+
+ if (!usb_host_read_file(line, sizeof(line), "bAlternateSetting",
+ device_name)) {
+ /* Assume alt 0 on error */
+ return 0;
+ }
+ if (sscanf(line, "%d", &alt_setting) != 1) {
+ /* Assume alt 0 on error */
+ return 0;
+ }
+ return alt_setting;
+}
+
+/* returns 1 on problem encountered or 0 for success */
+static int usb_linux_update_endp_table(USBHostDevice *s)
+{
+ uint8_t *descriptors;
+ uint8_t devep, type, alt_interface;
+ uint16_t raw;
+ int interface, length, i, ep, pid;
+ struct endp_data *epd;
+
+ usb_ep_init(&s->dev);
+
+ if (s->dev.configuration == 0) {
+ /* not configured yet -- leave all endpoints disabled */
+ return 0;
+ }
+
+ /* get the desired configuration, interface, and endpoint descriptors
+ * from device description */
+ descriptors = &s->descr[18];
+ length = s->descr_len - 18;
+ i = 0;
+
+ while (i < length) {
+ if (descriptors[i + 1] != USB_DT_CONFIG) {
+ fprintf(stderr, "invalid descriptor data\n");
+ return 1;
+ } else if (descriptors[i + 5] != s->dev.configuration) {
+ DPRINTF("not requested configuration %d\n", s->dev.configuration);
+ i += (descriptors[i + 3] << 8) + descriptors[i + 2];
+ continue;
+ }
+ i += descriptors[i];
+
+ if (descriptors[i + 1] != USB_DT_INTERFACE ||
+ (descriptors[i + 1] == USB_DT_INTERFACE &&
+ descriptors[i + 4] == 0)) {
+ i += descriptors[i];
+ continue;
+ }
+
+ interface = descriptors[i + 2];
+ alt_interface = usb_linux_get_alt_setting(s, s->dev.configuration,
+ interface);
+
+ /* the current interface descriptor is the active interface
+ * and has endpoints */
+ if (descriptors[i + 3] != alt_interface) {
+ i += descriptors[i];
+ continue;
+ }
+
+ /* advance to the endpoints */
+ while (i < length && descriptors[i +1] != USB_DT_ENDPOINT) {
+ i += descriptors[i];
+ }
+
+ if (i >= length)
+ break;
+
+ while (i < length) {
+ if (descriptors[i + 1] != USB_DT_ENDPOINT) {
+ break;
+ }
+
+ devep = descriptors[i + 2];
+ pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT;
+ ep = devep & 0xf;
+ if (ep == 0) {
+ fprintf(stderr, "usb-linux: invalid ep descriptor, ep == 0\n");
+ return 1;
+ }
+
+ type = descriptors[i + 3] & 0x3;
+ raw = descriptors[i + 4] + (descriptors[i + 5] << 8);
+ usb_ep_set_max_packet_size(&s->dev, pid, ep, raw);
+ assert(usb_ep_get_type(&s->dev, pid, ep) ==
+ USB_ENDPOINT_XFER_INVALID);
+ usb_ep_set_type(&s->dev, pid, ep, type);
+ usb_ep_set_ifnum(&s->dev, pid, ep, interface);
+ if (type == USB_ENDPOINT_XFER_BULK) {
+ usb_ep_set_pipeline(&s->dev, pid, ep, true);
+ }
+
+ epd = get_endp(s, pid, ep);
+ epd->halted = 0;
+
+ i += descriptors[i];
+ }
+ }
+#ifdef DEBUG
+ usb_ep_dump(&s->dev);
+#endif
+ return 0;
+}
+
+/*
+ * Check if we can safely redirect a usb2 device to a usb1 virtual controller,
+ * this function assumes this is safe, if:
+ * 1) There are no isoc endpoints
+ * 2) There are no interrupt endpoints with a max_packet_size > 64
+ * Note bulk endpoints with a max_packet_size > 64 in theory also are not
+ * usb1 compatible, but in practice this seems to work fine.
+ */
+static int usb_linux_full_speed_compat(USBHostDevice *dev)
+{
+ int i, packet_size;
+
+ /*
+ * usb_linux_update_endp_table only registers info about ep in the current
+ * interface altsettings, so we need to parse the descriptors again.
+ */
+ for (i = 0; (i + 5) < dev->descr_len; i += dev->descr[i]) {
+ if (dev->descr[i + 1] == USB_DT_ENDPOINT) {
+ switch (dev->descr[i + 3] & 0x3) {
+ case 0x00: /* CONTROL */
+ break;
+ case 0x01: /* ISO */
+ return 0;
+ case 0x02: /* BULK */
+ break;
+ case 0x03: /* INTERRUPT */
+ packet_size = dev->descr[i + 4] + (dev->descr[i + 5] << 8);
+ if (packet_size > 64)
+ return 0;
+ break;
+ }
+ }
+ }
+ return 1;
+}
+
+static int usb_host_open(USBHostDevice *dev, int bus_num,
+ int addr, const char *port,
+ const char *prod_name, int speed)
+{
+ int fd = -1, ret;
+
+ trace_usb_host_open_started(bus_num, addr);
+
+ if (dev->fd != -1) {
+ goto fail;
+ }
+
+ fd = usb_host_open_device(bus_num, addr);
+ if (fd < 0) {
+ goto fail;
+ }
+ DPRINTF("husb: opened %s\n", buf);
+
+ dev->bus_num = bus_num;
+ dev->addr = addr;
+ strcpy(dev->port, port);
+ dev->fd = fd;
+
+ /* read the device description */
+ dev->descr_len = read(fd, dev->descr, sizeof(dev->descr));
+ if (dev->descr_len <= 0) {
+ perror("husb: reading device data failed");
+ goto fail;
+ }
+
+#ifdef DEBUG
+ {
+ int x;
+ printf("=== begin dumping device descriptor data ===\n");
+ for (x = 0; x < dev->descr_len; x++) {
+ printf("%02x ", dev->descr[x]);
+ }
+ printf("\n=== end dumping device descriptor data ===\n");
+ }
+#endif
+
+
+ /* start unconfigured -- we'll wait for the guest to set a configuration */
+ if (!usb_host_claim_interfaces(dev, 0)) {
+ goto fail;
+ }
+
+ ret = usb_linux_update_endp_table(dev);
+ if (ret) {
+ goto fail;
+ }
+
+ if (speed == -1) {
+ struct usbdevfs_connectinfo ci;
+
+ ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
+ if (ret < 0) {
+ perror("usb_host_device_open: USBDEVFS_CONNECTINFO");
+ goto fail;
+ }
+
+ if (ci.slow) {
+ speed = USB_SPEED_LOW;
+ } else {
+ speed = USB_SPEED_HIGH;
+ }
+ }
+ dev->dev.speed = speed;
+ dev->dev.speedmask = (1 << speed);
+ if (dev->dev.speed == USB_SPEED_HIGH && usb_linux_full_speed_compat(dev)) {
+ dev->dev.speedmask |= USB_SPEED_MASK_FULL;
+ }
+
+ trace_usb_host_open_success(bus_num, addr);
+
+ if (!prod_name || prod_name[0] == '\0') {
+ snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+ "host:%d.%d", bus_num, addr);
+ } else {
+ pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+ prod_name);
+ }
+
+ ret = usb_device_attach(&dev->dev);
+ if (ret) {
+ goto fail;
+ }
+
+ /* USB devio uses 'write' flag to check for async completions */
+ qemu_set_fd_handler(dev->fd, NULL, async_complete, dev);
+
+ return 0;
+
+fail:
+ trace_usb_host_open_failure(bus_num, addr);
+ if (dev->fd != -1) {
+ close(dev->fd);
+ dev->fd = -1;
+ }
+ return -1;
+}
+
+static int usb_host_close(USBHostDevice *dev)
+{
+ int i;
+
+ if (dev->fd == -1) {
+ return -1;
+ }
+
+ trace_usb_host_close(dev->bus_num, dev->addr);
+
+ qemu_set_fd_handler(dev->fd, NULL, NULL, NULL);
+ dev->closing = 1;
+ for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
+ if (is_isoc(dev, USB_TOKEN_IN, i)) {
+ usb_host_stop_n_free_iso(dev, USB_TOKEN_IN, i);
+ }
+ if (is_isoc(dev, USB_TOKEN_OUT, i)) {
+ usb_host_stop_n_free_iso(dev, USB_TOKEN_OUT, i);
+ }
+ }
+ async_complete(dev);
+ dev->closing = 0;
+ if (dev->dev.attached) {
+ usb_device_detach(&dev->dev);
+ }
+ usb_host_do_reset(dev);
+ close(dev->fd);
+ dev->fd = -1;
+ return 0;
+}
+
+static void usb_host_exit_notifier(struct Notifier *n, void *data)
+{
+ USBHostDevice *s = container_of(n, USBHostDevice, exit);
+
+ usb_host_release_port(s);
+ if (s->fd != -1) {
+ usb_host_do_reset(s);;
+ }
+}
+
+static int usb_host_initfn(USBDevice *dev)
+{
+ USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+
+ dev->auto_attach = 0;
+ s->fd = -1;
+ s->hub_fd = -1;
+
+ QTAILQ_INSERT_TAIL(&hostdevs, s, next);
+ s->exit.notify = usb_host_exit_notifier;
+ qemu_add_exit_notifier(&s->exit);
+ usb_host_auto_check(NULL);
+
+ if (s->match.bus_num != 0 && s->match.port != NULL) {
+ usb_host_claim_port(s);
+ }
+ return 0;
+}
+
+static const VMStateDescription vmstate_usb_host = {
+ .name = "usb-host",
+ .unmigratable = 1,
+};
+
+static Property usb_host_dev_properties[] = {
+ DEFINE_PROP_UINT32("hostbus", USBHostDevice, match.bus_num, 0),
+ DEFINE_PROP_UINT32("hostaddr", USBHostDevice, match.addr, 0),
+ DEFINE_PROP_STRING("hostport", USBHostDevice, match.port),
+ DEFINE_PROP_HEX32("vendorid", USBHostDevice, match.vendor_id, 0),
+ DEFINE_PROP_HEX32("productid", USBHostDevice, match.product_id, 0),
+ DEFINE_PROP_UINT32("isobufs", USBHostDevice, iso_urb_count, 4),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usb_host_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+ uc->init = usb_host_initfn;
+ uc->product_desc = "USB Host Device";
+ uc->cancel_packet = usb_host_async_cancel;
+ uc->handle_data = usb_host_handle_data;
+ uc->handle_control = usb_host_handle_control;
+ uc->handle_reset = usb_host_handle_reset;
+ uc->handle_destroy = usb_host_handle_destroy;
+ dc->vmsd = &vmstate_usb_host;
+ dc->props = usb_host_dev_properties;
+}
+
+static TypeInfo usb_host_dev_info = {
+ .name = "usb-host",
+ .parent = TYPE_USB_DEVICE,
+ .instance_size = sizeof(USBHostDevice),
+ .class_init = usb_host_class_initfn,
+};
+
+static void usb_host_register_types(void)
+{
+ type_register_static(&usb_host_dev_info);
+ usb_legacy_register("usb-host", "host", usb_host_device_open);
+}
+
+type_init(usb_host_register_types)
+
+USBDevice *usb_host_device_open(USBBus *bus, const char *devname)
+{
+ struct USBAutoFilter filter;
+ USBDevice *dev;
+ char *p;
+
+ dev = usb_create(bus, "usb-host");
+
+ if (strstr(devname, "auto:")) {
+ if (parse_filter(devname, &filter) < 0) {
+ goto fail;
+ }
+ } else {
+ if ((p = strchr(devname, '.'))) {
+ filter.bus_num = strtoul(devname, NULL, 0);
+ filter.addr = strtoul(p + 1, NULL, 0);
+ filter.vendor_id = 0;
+ filter.product_id = 0;
+ } else if ((p = strchr(devname, ':'))) {
+ filter.bus_num = 0;
+ filter.addr = 0;
+ filter.vendor_id = strtoul(devname, NULL, 16);
+ filter.product_id = strtoul(p + 1, NULL, 16);
+ } else {
+ goto fail;
+ }
+ }
+
+ qdev_prop_set_uint32(&dev->qdev, "hostbus", filter.bus_num);
+ qdev_prop_set_uint32(&dev->qdev, "hostaddr", filter.addr);
+ qdev_prop_set_uint32(&dev->qdev, "vendorid", filter.vendor_id);
+ qdev_prop_set_uint32(&dev->qdev, "productid", filter.product_id);
+ qdev_init_nofail(&dev->qdev);
+ return dev;
+
+fail:
+ qdev_free(&dev->qdev);
+ return NULL;
+}
+
+int usb_host_device_close(const char *devname)
+{
+#if 0
+ char product_name[PRODUCT_NAME_SZ];
+ int bus_num, addr;
+ USBHostDevice *s;
+
+ if (strstr(devname, "auto:")) {
+ return usb_host_auto_del(devname);
+ }
+ if (usb_host_find_device(&bus_num, &addr, product_name,
+ sizeof(product_name), devname) < 0) {
+ return -1;
+ }
+ s = hostdev_find(bus_num, addr);
+ if (s) {
+ usb_device_delete_addr(s->bus_num, s->dev.addr);
+ return 0;
+ }
+#endif
+
+ return -1;
+}
+
+/*
+ * Read sys file-system device file
+ *
+ * @line address of buffer to put file contents in
+ * @line_size size of line
+ * @device_file path to device file (printf format string)
+ * @device_name device being opened (inserted into device_file)
+ *
+ * @return 0 failed, 1 succeeded ('line' contains data)
+ */
+static int usb_host_read_file(char *line, size_t line_size,
+ const char *device_file, const char *device_name)
+{
+ FILE *f;
+ int ret = 0;
+ char filename[PATH_MAX];
+
+ snprintf(filename, PATH_MAX, "/sys/bus/usb/devices/%s/%s", device_name,
+ device_file);
+ f = fopen(filename, "r");
+ if (f) {
+ ret = fgets(line, line_size, f) != NULL;
+ fclose(f);
+ }
+
+ return ret;
+}
+
+/*
+ * Use /sys/bus/usb/devices/ directory to determine host's USB
+ * devices.
+ *
+ * This code is based on Robert Schiele's original patches posted to
+ * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950
+ */
+static int usb_host_scan(void *opaque, USBScanFunc *func)
+{
+ DIR *dir = NULL;
+ char line[1024];
+ int bus_num, addr, speed, class_id, product_id, vendor_id;
+ int ret = 0;
+ char port[MAX_PORTLEN];
+ char product_name[512];
+ struct dirent *de;
+
+ dir = opendir("/sys/bus/usb/devices");
+ if (!dir) {
+ perror("husb: opendir /sys/bus/usb/devices");
+ fprintf(stderr, "husb: please make sure sysfs is mounted at /sys\n");
+ goto the_end;
+ }
+
+ while ((de = readdir(dir))) {
+ if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) {
+ if (sscanf(de->d_name, "%d-%7[0-9.]", &bus_num, port) < 2) {
+ continue;
+ }
+
+ if (!usb_host_read_file(line, sizeof(line), "devnum", de->d_name)) {
+ goto the_end;
+ }
+ if (sscanf(line, "%d", &addr) != 1) {
+ goto the_end;
+ }
+ if (!usb_host_read_file(line, sizeof(line), "bDeviceClass",
+ de->d_name)) {
+ goto the_end;
+ }
+ if (sscanf(line, "%x", &class_id) != 1) {
+ goto the_end;
+ }
+
+ if (!usb_host_read_file(line, sizeof(line), "idVendor",
+ de->d_name)) {
+ goto the_end;
+ }
+ if (sscanf(line, "%x", &vendor_id) != 1) {
+ goto the_end;
+ }
+ if (!usb_host_read_file(line, sizeof(line), "idProduct",
+ de->d_name)) {
+ goto the_end;
+ }
+ if (sscanf(line, "%x", &product_id) != 1) {
+ goto the_end;
+ }
+ if (!usb_host_read_file(line, sizeof(line), "product",
+ de->d_name)) {
+ *product_name = 0;
+ } else {
+ if (strlen(line) > 0) {
+ line[strlen(line) - 1] = '\0';
+ }
+ pstrcpy(product_name, sizeof(product_name), line);
+ }
+
+ if (!usb_host_read_file(line, sizeof(line), "speed", de->d_name)) {
+ goto the_end;
+ }
+ if (!strcmp(line, "5000\n")) {
+ speed = USB_SPEED_SUPER;
+ } else if (!strcmp(line, "480\n")) {
+ speed = USB_SPEED_HIGH;
+ } else if (!strcmp(line, "1.5\n")) {
+ speed = USB_SPEED_LOW;
+ } else {
+ speed = USB_SPEED_FULL;
+ }
+
+ ret = func(opaque, bus_num, addr, port, class_id, vendor_id,
+ product_id, product_name, speed);
+ if (ret) {
+ goto the_end;
+ }
+ }
+ }
+ the_end:
+ if (dir) {
+ closedir(dir);
+ }
+ return ret;
+}
+
+static QEMUTimer *usb_auto_timer;
+
+static int usb_host_auto_scan(void *opaque, int bus_num,
+ int addr, const char *port,
+ int class_id, int vendor_id, int product_id,
+ const char *product_name, int speed)
+{
+ struct USBAutoFilter *f;
+ struct USBHostDevice *s;
+
+ /* Ignore hubs */
+ if (class_id == 9)
+ return 0;
+
+ QTAILQ_FOREACH(s, &hostdevs, next) {
+ f = &s->match;
+
+ if (f->bus_num > 0 && f->bus_num != bus_num) {
+ continue;
+ }
+ if (f->addr > 0 && f->addr != addr) {
+ continue;
+ }
+ if (f->port != NULL && (port == NULL || strcmp(f->port, port) != 0)) {
+ continue;
+ }
+
+ if (f->vendor_id > 0 && f->vendor_id != vendor_id) {
+ continue;
+ }
+
+ if (f->product_id > 0 && f->product_id != product_id) {
+ continue;
+ }
+ /* We got a match */
+ s->seen++;
+ if (s->errcount >= 3) {
+ return 0;
+ }
+
+ /* Already attached ? */
+ if (s->fd != -1) {
+ return 0;
+ }
+ DPRINTF("husb: auto open: bus_num %d addr %d\n", bus_num, addr);
+
+ if (usb_host_open(s, bus_num, addr, port, product_name, speed) < 0) {
+ s->errcount++;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void usb_host_auto_check(void *unused)
+{
+ struct USBHostDevice *s;
+ int unconnected = 0;
+
+ usb_host_scan(NULL, usb_host_auto_scan);
+
+ QTAILQ_FOREACH(s, &hostdevs, next) {
+ if (s->fd == -1) {
+ unconnected++;
+ }
+ if (s->seen == 0) {
+ s->errcount = 0;
+ }
+ s->seen = 0;
+ }
+
+ if (unconnected == 0) {
+ /* nothing to watch */
+ if (usb_auto_timer) {
+ qemu_del_timer(usb_auto_timer);
+ trace_usb_host_auto_scan_disabled();
+ }
+ return;
+ }
+
+ if (!usb_auto_timer) {
+ usb_auto_timer = qemu_new_timer_ms(rt_clock, usb_host_auto_check, NULL);
+ if (!usb_auto_timer) {
+ return;
+ }
+ trace_usb_host_auto_scan_enabled();
+ }
+ qemu_mod_timer(usb_auto_timer, qemu_get_clock_ms(rt_clock) + 2000);
+}
+
+/*
+ * Autoconnect filter
+ * Format:
+ * auto:bus:dev[:vid:pid]
+ * auto:bus.dev[:vid:pid]
+ *
+ * bus - bus number (dec, * means any)
+ * dev - device number (dec, * means any)
+ * vid - vendor id (hex, * means any)
+ * pid - product id (hex, * means any)
+ *
+ * See 'lsusb' output.
+ */
+static int parse_filter(const char *spec, struct USBAutoFilter *f)
+{
+ enum { BUS, DEV, VID, PID, DONE };
+ const char *p = spec;
+ int i;
+
+ f->bus_num = 0;
+ f->addr = 0;
+ f->vendor_id = 0;
+ f->product_id = 0;
+
+ for (i = BUS; i < DONE; i++) {
+ p = strpbrk(p, ":.");
+ if (!p) {
+ break;
+ }
+ p++;
+
+ if (*p == '*') {
+ continue;
+ }
+ switch(i) {
+ case BUS: f->bus_num = strtol(p, NULL, 10); break;
+ case DEV: f->addr = strtol(p, NULL, 10); break;
+ case VID: f->vendor_id = strtol(p, NULL, 16); break;
+ case PID: f->product_id = strtol(p, NULL, 16); break;
+ }
+ }
+
+ if (i < DEV) {
+ fprintf(stderr, "husb: invalid auto filter spec %s\n", spec);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**********************/
+/* USB host device info */
+
+struct usb_class_info {
+ int class;
+ const char *class_name;
+};
+
+static const struct usb_class_info usb_class_info[] = {
+ { USB_CLASS_AUDIO, "Audio"},
+ { USB_CLASS_COMM, "Communication"},
+ { USB_CLASS_HID, "HID"},
+ { USB_CLASS_HUB, "Hub" },
+ { USB_CLASS_PHYSICAL, "Physical" },
+ { USB_CLASS_PRINTER, "Printer" },
+ { USB_CLASS_MASS_STORAGE, "Storage" },
+ { USB_CLASS_CDC_DATA, "Data" },
+ { USB_CLASS_APP_SPEC, "Application Specific" },
+ { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
+ { USB_CLASS_STILL_IMAGE, "Still Image" },
+ { USB_CLASS_CSCID, "Smart Card" },
+ { USB_CLASS_CONTENT_SEC, "Content Security" },
+ { -1, NULL }
+};
+
+static const char *usb_class_str(uint8_t class)
+{
+ const struct usb_class_info *p;
+ for(p = usb_class_info; p->class != -1; p++) {
+ if (p->class == class) {
+ break;
+ }
+ }
+ return p->class_name;
+}
+
+static void usb_info_device(Monitor *mon, int bus_num,
+ int addr, const char *port,
+ int class_id, int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ const char *class_str, *speed_str;
+
+ switch(speed) {
+ case USB_SPEED_LOW:
+ speed_str = "1.5";
+ break;
+ case USB_SPEED_FULL:
+ speed_str = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed_str = "480";
+ break;
+ case USB_SPEED_SUPER:
+ speed_str = "5000";
+ break;
+ default:
+ speed_str = "?";
+ break;
+ }
+
+ monitor_printf(mon, " Bus %d, Addr %d, Port %s, Speed %s Mb/s\n",
+ bus_num, addr, port, speed_str);
+ class_str = usb_class_str(class_id);
+ if (class_str) {
+ monitor_printf(mon, " %s:", class_str);
+ } else {
+ monitor_printf(mon, " Class %02x:", class_id);
+ }
+ monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
+ if (product_name[0] != '\0') {
+ monitor_printf(mon, ", %s", product_name);
+ }
+ monitor_printf(mon, "\n");
+}
+
+static int usb_host_info_device(void *opaque, int bus_num, int addr,
+ const char *path, int class_id,
+ int vendor_id, int product_id,
+ const char *product_name,
+ int speed)
+{
+ Monitor *mon = opaque;
+
+ usb_info_device(mon, bus_num, addr, path, class_id, vendor_id, product_id,
+ product_name, speed);
+ return 0;
+}
+
+static void dec2str(int val, char *str, size_t size)
+{
+ if (val == 0) {
+ snprintf(str, size, "*");
+ } else {
+ snprintf(str, size, "%d", val);
+ }
+}
+
+static void hex2str(int val, char *str, size_t size)
+{
+ if (val == 0) {
+ snprintf(str, size, "*");
+ } else {
+ snprintf(str, size, "%04x", val);
+ }
+}
+
+void usb_host_info(Monitor *mon)
+{
+ struct USBAutoFilter *f;
+ struct USBHostDevice *s;
+
+ usb_host_scan(mon, usb_host_info_device);
+
+ if (QTAILQ_EMPTY(&hostdevs)) {
+ return;
+ }
+
+ monitor_printf(mon, " Auto filters:\n");
+ QTAILQ_FOREACH(s, &hostdevs, next) {
+ char bus[10], addr[10], vid[10], pid[10];
+ f = &s->match;
+ dec2str(f->bus_num, bus, sizeof(bus));
+ dec2str(f->addr, addr, sizeof(addr));
+ hex2str(f->vendor_id, vid, sizeof(vid));
+ hex2str(f->product_id, pid, sizeof(pid));
+ monitor_printf(mon, " Bus %s, Addr %s, Port %s, ID %s:%s\n",
+ bus, addr, f->port ? f->port : "*", vid, pid);
+ }
+}
diff --git a/hw/usb/host-stub.c b/hw/usb/host-stub.c
new file mode 100644
index 0000000000..b4e10c12ca
--- /dev/null
+++ b/hw/usb/host-stub.c
@@ -0,0 +1,52 @@
+/*
+ * Stub host USB redirector
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ * Support for host device auto connect & disconnect
+ * Major rewrite to support fully async operation
+ *
+ * Copyright 2008 TJ <linux@tjworld.net>
+ * Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
+ * to the legacy /proc/bus/usb USB device discovery and handling
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "console.h"
+#include "hw/usb.h"
+#include "monitor.h"
+
+void usb_host_info(Monitor *mon)
+{
+ monitor_printf(mon, "USB host devices not supported\n");
+}
+
+/* XXX: modify configure to compile the right host driver */
+USBDevice *usb_host_device_open(USBBus *bus, const char *devname)
+{
+ return NULL;
+}
+
+int usb_host_device_close(const char *devname)
+{
+ return 0;
+}
diff --git a/hw/usb-libhw.c b/hw/usb/libhw.c
index 162b42bd5b..2462351389 100644
--- a/hw/usb-libhw.c
+++ b/hw/usb/libhw.c
@@ -21,7 +21,7 @@
*/
#include "qemu-common.h"
#include "cpu-common.h"
-#include "usb.h"
+#include "hw/usb.h"
#include "dma.h"
int usb_packet_map(USBPacket *p, QEMUSGList *sgl)
diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c
new file mode 100644
index 0000000000..8e9f175dbb
--- /dev/null
+++ b/hw/usb/redirect.c
@@ -0,0 +1,1485 @@
+/*
+ * USB redirector usb-guest
+ *
+ * Copyright (c) 2011 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "monitor.h"
+#include "sysemu.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+#include <usbredirparser.h>
+#include <usbredirfilter.h>
+
+#include "hw/usb.h"
+
+#define MAX_ENDPOINTS 32
+#define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f))
+#define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f))
+
+typedef struct AsyncURB AsyncURB;
+typedef struct USBRedirDevice USBRedirDevice;
+
+/* Struct to hold buffered packets (iso or int input packets) */
+struct buf_packet {
+ uint8_t *data;
+ int len;
+ int status;
+ QTAILQ_ENTRY(buf_packet)next;
+};
+
+struct endp_data {
+ uint8_t type;
+ uint8_t interval;
+ uint8_t interface; /* bInterfaceNumber this ep belongs to */
+ uint8_t iso_started;
+ uint8_t iso_error; /* For reporting iso errors to the HC */
+ uint8_t interrupt_started;
+ uint8_t interrupt_error;
+ uint8_t bufpq_prefilled;
+ uint8_t bufpq_dropping_packets;
+ QTAILQ_HEAD(, buf_packet) bufpq;
+ int bufpq_size;
+ int bufpq_target_size;
+};
+
+struct USBRedirDevice {
+ USBDevice dev;
+ /* Properties */
+ CharDriverState *cs;
+ uint8_t debug;
+ char *filter_str;
+ /* Data passed from chardev the fd_read cb to the usbredirparser read cb */
+ const uint8_t *read_buf;
+ int read_buf_size;
+ /* For async handling of open/close */
+ QEMUBH *open_close_bh;
+ /* To delay the usb attach in case of quick chardev close + open */
+ QEMUTimer *attach_timer;
+ int64_t next_attach_time;
+ struct usbredirparser *parser;
+ struct endp_data endpoint[MAX_ENDPOINTS];
+ uint32_t packet_id;
+ QTAILQ_HEAD(, AsyncURB) asyncq;
+ /* Data for device filtering */
+ struct usb_redir_device_connect_header device_info;
+ struct usb_redir_interface_info_header interface_info;
+ struct usbredirfilter_rule *filter_rules;
+ int filter_rules_count;
+};
+
+struct AsyncURB {
+ USBRedirDevice *dev;
+ USBPacket *packet;
+ uint32_t packet_id;
+ int get;
+ union {
+ struct usb_redir_control_packet_header control_packet;
+ struct usb_redir_bulk_packet_header bulk_packet;
+ struct usb_redir_interrupt_packet_header interrupt_packet;
+ };
+ QTAILQ_ENTRY(AsyncURB)next;
+};
+
+static void usbredir_hello(void *priv, struct usb_redir_hello_header *h);
+static void usbredir_device_connect(void *priv,
+ struct usb_redir_device_connect_header *device_connect);
+static void usbredir_device_disconnect(void *priv);
+static void usbredir_interface_info(void *priv,
+ struct usb_redir_interface_info_header *interface_info);
+static void usbredir_ep_info(void *priv,
+ struct usb_redir_ep_info_header *ep_info);
+static void usbredir_configuration_status(void *priv, uint32_t id,
+ struct usb_redir_configuration_status_header *configuration_status);
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+ struct usb_redir_alt_setting_status_header *alt_setting_status);
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+ struct usb_redir_iso_stream_status_header *iso_stream_status);
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+ struct usb_redir_interrupt_receiving_status_header
+ *interrupt_receiving_status);
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+ struct usb_redir_bulk_streams_status_header *bulk_streams_status);
+static void usbredir_control_packet(void *priv, uint32_t id,
+ struct usb_redir_control_packet_header *control_packet,
+ uint8_t *data, int data_len);
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+ struct usb_redir_bulk_packet_header *bulk_packet,
+ uint8_t *data, int data_len);
+static void usbredir_iso_packet(void *priv, uint32_t id,
+ struct usb_redir_iso_packet_header *iso_packet,
+ uint8_t *data, int data_len);
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+ struct usb_redir_interrupt_packet_header *interrupt_header,
+ uint8_t *data, int data_len);
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+ int status, int actual_len);
+
+#define VERSION "qemu usb-redir guest " QEMU_VERSION
+
+/*
+ * Logging stuff
+ */
+
+#define ERROR(...) \
+ do { \
+ if (dev->debug >= usbredirparser_error) { \
+ error_report("usb-redir error: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define WARNING(...) \
+ do { \
+ if (dev->debug >= usbredirparser_warning) { \
+ error_report("usb-redir warning: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define INFO(...) \
+ do { \
+ if (dev->debug >= usbredirparser_info) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define DPRINTF(...) \
+ do { \
+ if (dev->debug >= usbredirparser_debug) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define DPRINTF2(...) \
+ do { \
+ if (dev->debug >= usbredirparser_debug_data) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+
+static void usbredir_log(void *priv, int level, const char *msg)
+{
+ USBRedirDevice *dev = priv;
+
+ if (dev->debug < level) {
+ return;
+ }
+
+ error_report("%s", msg);
+}
+
+static void usbredir_log_data(USBRedirDevice *dev, const char *desc,
+ const uint8_t *data, int len)
+{
+ int i, j, n;
+
+ if (dev->debug < usbredirparser_debug_data) {
+ return;
+ }
+
+ for (i = 0; i < len; i += j) {
+ char buf[128];
+
+ n = sprintf(buf, "%s", desc);
+ for (j = 0; j < 8 && i + j < len; j++) {
+ n += sprintf(buf + n, " %02X", data[i + j]);
+ }
+ error_report("%s", buf);
+ }
+}
+
+/*
+ * usbredirparser io functions
+ */
+
+static int usbredir_read(void *priv, uint8_t *data, int count)
+{
+ USBRedirDevice *dev = priv;
+
+ if (dev->read_buf_size < count) {
+ count = dev->read_buf_size;
+ }
+
+ memcpy(data, dev->read_buf, count);
+
+ dev->read_buf_size -= count;
+ if (dev->read_buf_size) {
+ dev->read_buf += count;
+ } else {
+ dev->read_buf = NULL;
+ }
+
+ return count;
+}
+
+static int usbredir_write(void *priv, uint8_t *data, int count)
+{
+ USBRedirDevice *dev = priv;
+
+ if (!dev->cs->opened) {
+ return 0;
+ }
+
+ return qemu_chr_fe_write(dev->cs, data, count);
+}
+
+/*
+ * Async and buffered packets helpers
+ */
+
+static AsyncURB *async_alloc(USBRedirDevice *dev, USBPacket *p)
+{
+ AsyncURB *aurb = (AsyncURB *) g_malloc0(sizeof(AsyncURB));
+ aurb->dev = dev;
+ aurb->packet = p;
+ aurb->packet_id = dev->packet_id;
+ QTAILQ_INSERT_TAIL(&dev->asyncq, aurb, next);
+ dev->packet_id++;
+
+ return aurb;
+}
+
+static void async_free(USBRedirDevice *dev, AsyncURB *aurb)
+{
+ QTAILQ_REMOVE(&dev->asyncq, aurb, next);
+ g_free(aurb);
+}
+
+static AsyncURB *async_find(USBRedirDevice *dev, uint32_t packet_id)
+{
+ AsyncURB *aurb;
+
+ QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+ if (aurb->packet_id == packet_id) {
+ return aurb;
+ }
+ }
+ ERROR("could not find async urb for packet_id %u\n", packet_id);
+ return NULL;
+}
+
+static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ AsyncURB *aurb;
+
+ QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+ if (p != aurb->packet) {
+ continue;
+ }
+
+ DPRINTF("async cancel id %u\n", aurb->packet_id);
+ usbredirparser_send_cancel_data_packet(dev->parser, aurb->packet_id);
+ usbredirparser_do_write(dev->parser);
+
+ /* Mark it as dead */
+ aurb->packet = NULL;
+ break;
+ }
+}
+
+static void bufp_alloc(USBRedirDevice *dev,
+ uint8_t *data, int len, int status, uint8_t ep)
+{
+ struct buf_packet *bufp;
+
+ if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets &&
+ dev->endpoint[EP2I(ep)].bufpq_size >
+ 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) {
+ DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1;
+ }
+ /* Since we're interupting the stream anyways, drop enough packets to get
+ back to our target buffer size */
+ if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) {
+ if (dev->endpoint[EP2I(ep)].bufpq_size >
+ dev->endpoint[EP2I(ep)].bufpq_target_size) {
+ free(data);
+ return;
+ }
+ dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+ }
+
+ bufp = g_malloc(sizeof(struct buf_packet));
+ bufp->data = data;
+ bufp->len = len;
+ bufp->status = status;
+ QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+ dev->endpoint[EP2I(ep)].bufpq_size++;
+}
+
+static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp,
+ uint8_t ep)
+{
+ QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+ dev->endpoint[EP2I(ep)].bufpq_size--;
+ free(bufp->data);
+ g_free(bufp);
+}
+
+static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep)
+{
+ struct buf_packet *buf, *buf_next;
+
+ QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) {
+ bufp_free(dev, buf, ep);
+ }
+}
+
+/*
+ * USBDevice callbacks
+ */
+
+static void usbredir_handle_reset(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+ DPRINTF("reset device\n");
+ usbredirparser_send_reset(dev->parser);
+ usbredirparser_do_write(dev->parser);
+}
+
+static int usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p,
+ uint8_t ep)
+{
+ int status, len;
+ if (!dev->endpoint[EP2I(ep)].iso_started &&
+ !dev->endpoint[EP2I(ep)].iso_error) {
+ struct usb_redir_start_iso_stream_header start_iso = {
+ .endpoint = ep,
+ };
+ int pkts_per_sec;
+
+ if (dev->dev.speed == USB_SPEED_HIGH) {
+ pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval;
+ } else {
+ pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval;
+ }
+ /* Testing has shown that we need circa 60 ms buffer */
+ dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000;
+
+ /* Aim for approx 100 interrupts / second on the client to
+ balance latency and interrupt load */
+ start_iso.pkts_per_urb = pkts_per_sec / 100;
+ if (start_iso.pkts_per_urb < 1) {
+ start_iso.pkts_per_urb = 1;
+ } else if (start_iso.pkts_per_urb > 32) {
+ start_iso.pkts_per_urb = 32;
+ }
+
+ start_iso.no_urbs = (dev->endpoint[EP2I(ep)].bufpq_target_size +
+ start_iso.pkts_per_urb - 1) /
+ start_iso.pkts_per_urb;
+ /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest
+ as overflow buffer. Also see the usbredir protocol documentation */
+ if (!(ep & USB_DIR_IN)) {
+ start_iso.no_urbs *= 2;
+ }
+ if (start_iso.no_urbs > 16) {
+ start_iso.no_urbs = 16;
+ }
+
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso);
+ usbredirparser_do_write(dev->parser);
+ DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n",
+ pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep);
+ dev->endpoint[EP2I(ep)].iso_started = 1;
+ dev->endpoint[EP2I(ep)].bufpq_prefilled = 0;
+ dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+ }
+
+ if (ep & USB_DIR_IN) {
+ struct buf_packet *isop;
+
+ if (dev->endpoint[EP2I(ep)].iso_started &&
+ !dev->endpoint[EP2I(ep)].bufpq_prefilled) {
+ if (dev->endpoint[EP2I(ep)].bufpq_size <
+ dev->endpoint[EP2I(ep)].bufpq_target_size) {
+ return usbredir_handle_status(dev, 0, 0);
+ }
+ dev->endpoint[EP2I(ep)].bufpq_prefilled = 1;
+ }
+
+ isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+ if (isop == NULL) {
+ DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n",
+ ep, dev->endpoint[EP2I(ep)].iso_error);
+ /* Re-fill the buffer */
+ dev->endpoint[EP2I(ep)].bufpq_prefilled = 0;
+ /* Check iso_error for stream errors, otherwise its an underrun */
+ status = dev->endpoint[EP2I(ep)].iso_error;
+ dev->endpoint[EP2I(ep)].iso_error = 0;
+ return status ? USB_RET_IOERROR : 0;
+ }
+ DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep,
+ isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size);
+
+ status = isop->status;
+ if (status != usb_redir_success) {
+ bufp_free(dev, isop, ep);
+ return USB_RET_IOERROR;
+ }
+
+ len = isop->len;
+ if (len > p->iov.size) {
+ ERROR("received iso data is larger then packet ep %02X (%d > %d)\n",
+ ep, len, (int)p->iov.size);
+ bufp_free(dev, isop, ep);
+ return USB_RET_BABBLE;
+ }
+ usb_packet_copy(p, isop->data, len);
+ bufp_free(dev, isop, ep);
+ return len;
+ } else {
+ /* If the stream was not started because of a pending error don't
+ send the packet to the usb-host */
+ if (dev->endpoint[EP2I(ep)].iso_started) {
+ struct usb_redir_iso_packet_header iso_packet = {
+ .endpoint = ep,
+ .length = p->iov.size
+ };
+ uint8_t buf[p->iov.size];
+ /* No id, we look at the ep when receiving a status back */
+ usb_packet_copy(p, buf, p->iov.size);
+ usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet,
+ buf, p->iov.size);
+ usbredirparser_do_write(dev->parser);
+ }
+ status = dev->endpoint[EP2I(ep)].iso_error;
+ dev->endpoint[EP2I(ep)].iso_error = 0;
+ DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status,
+ p->iov.size);
+ return usbredir_handle_status(dev, status, p->iov.size);
+ }
+}
+
+static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep)
+{
+ struct usb_redir_stop_iso_stream_header stop_iso_stream = {
+ .endpoint = ep
+ };
+ if (dev->endpoint[EP2I(ep)].iso_started) {
+ usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream);
+ DPRINTF("iso stream stopped ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].iso_started = 0;
+ }
+ dev->endpoint[EP2I(ep)].iso_error = 0;
+ usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p,
+ uint8_t ep)
+{
+ AsyncURB *aurb = async_alloc(dev, p);
+ struct usb_redir_bulk_packet_header bulk_packet;
+
+ DPRINTF("bulk-out ep %02X len %zd id %u\n", ep,
+ p->iov.size, aurb->packet_id);
+
+ bulk_packet.endpoint = ep;
+ bulk_packet.length = p->iov.size;
+ bulk_packet.stream_id = 0;
+ aurb->bulk_packet = bulk_packet;
+
+ if (ep & USB_DIR_IN) {
+ usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+ &bulk_packet, NULL, 0);
+ } else {
+ uint8_t buf[p->iov.size];
+ usb_packet_copy(p, buf, p->iov.size);
+ usbredir_log_data(dev, "bulk data out:", buf, p->iov.size);
+ usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+ &bulk_packet, buf, p->iov.size);
+ }
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_interrupt_data(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ if (ep & USB_DIR_IN) {
+ /* Input interrupt endpoint, buffered packet input */
+ struct buf_packet *intp;
+ int status, len;
+
+ if (!dev->endpoint[EP2I(ep)].interrupt_started &&
+ !dev->endpoint[EP2I(ep)].interrupt_error) {
+ struct usb_redir_start_interrupt_receiving_header start_int = {
+ .endpoint = ep,
+ };
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_start_interrupt_receiving(dev->parser, 0,
+ &start_int);
+ usbredirparser_do_write(dev->parser);
+ DPRINTF("interrupt recv started ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 1;
+ /* We don't really want to drop interrupt packets ever, but
+ having some upper limit to how much we buffer is good. */
+ dev->endpoint[EP2I(ep)].bufpq_target_size = 1000;
+ dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+ }
+
+ intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+ if (intp == NULL) {
+ DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep);
+ /* Check interrupt_error for stream errors */
+ status = dev->endpoint[EP2I(ep)].interrupt_error;
+ dev->endpoint[EP2I(ep)].interrupt_error = 0;
+ if (status) {
+ return usbredir_handle_status(dev, status, 0);
+ }
+ return USB_RET_NAK;
+ }
+ DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep,
+ intp->status, intp->len);
+
+ status = intp->status;
+ if (status != usb_redir_success) {
+ bufp_free(dev, intp, ep);
+ return usbredir_handle_status(dev, status, 0);
+ }
+
+ len = intp->len;
+ if (len > p->iov.size) {
+ ERROR("received int data is larger then packet ep %02X\n", ep);
+ bufp_free(dev, intp, ep);
+ return USB_RET_BABBLE;
+ }
+ usb_packet_copy(p, intp->data, len);
+ bufp_free(dev, intp, ep);
+ return len;
+ } else {
+ /* Output interrupt endpoint, normal async operation */
+ AsyncURB *aurb = async_alloc(dev, p);
+ struct usb_redir_interrupt_packet_header interrupt_packet;
+ uint8_t buf[p->iov.size];
+
+ DPRINTF("interrupt-out ep %02X len %zd id %u\n", ep, p->iov.size,
+ aurb->packet_id);
+
+ interrupt_packet.endpoint = ep;
+ interrupt_packet.length = p->iov.size;
+ aurb->interrupt_packet = interrupt_packet;
+
+ usb_packet_copy(p, buf, p->iov.size);
+ usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size);
+ usbredirparser_send_interrupt_packet(dev->parser, aurb->packet_id,
+ &interrupt_packet, buf, p->iov.size);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+ }
+}
+
+static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev,
+ uint8_t ep)
+{
+ struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = {
+ .endpoint = ep
+ };
+ if (dev->endpoint[EP2I(ep)].interrupt_started) {
+ usbredirparser_send_stop_interrupt_receiving(dev->parser, 0,
+ &stop_interrupt_recv);
+ DPRINTF("interrupt recv stopped ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 0;
+ }
+ dev->endpoint[EP2I(ep)].interrupt_error = 0;
+ usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_data(USBDevice *udev, USBPacket *p)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ uint8_t ep;
+
+ ep = p->ep->nr;
+ if (p->pid == USB_TOKEN_IN) {
+ ep |= USB_DIR_IN;
+ }
+
+ switch (dev->endpoint[EP2I(ep)].type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ERROR("handle_data called for control transfer on ep %02X\n", ep);
+ return USB_RET_NAK;
+ case USB_ENDPOINT_XFER_ISOC:
+ return usbredir_handle_iso_data(dev, p, ep);
+ case USB_ENDPOINT_XFER_BULK:
+ return usbredir_handle_bulk_data(dev, p, ep);
+ case USB_ENDPOINT_XFER_INT:
+ return usbredir_handle_interrupt_data(dev, p, ep);
+ default:
+ ERROR("handle_data ep %02X has unknown type %d\n", ep,
+ dev->endpoint[EP2I(ep)].type);
+ return USB_RET_NAK;
+ }
+}
+
+static int usbredir_set_config(USBRedirDevice *dev, USBPacket *p,
+ int config)
+{
+ struct usb_redir_set_configuration_header set_config;
+ AsyncURB *aurb = async_alloc(dev, p);
+ int i;
+
+ DPRINTF("set config %d id %u\n", config, aurb->packet_id);
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ switch (dev->endpoint[i].type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ usbredir_stop_iso_stream(dev, I2EP(i));
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (i & 0x10) {
+ usbredir_stop_interrupt_receiving(dev, I2EP(i));
+ }
+ break;
+ }
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+
+ set_config.configuration = config;
+ usbredirparser_send_set_configuration(dev->parser, aurb->packet_id,
+ &set_config);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_get_config(USBRedirDevice *dev, USBPacket *p)
+{
+ AsyncURB *aurb = async_alloc(dev, p);
+
+ DPRINTF("get config id %u\n", aurb->packet_id);
+
+ aurb->get = 1;
+ usbredirparser_send_get_configuration(dev->parser, aurb->packet_id);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_set_interface(USBRedirDevice *dev, USBPacket *p,
+ int interface, int alt)
+{
+ struct usb_redir_set_alt_setting_header set_alt;
+ AsyncURB *aurb = async_alloc(dev, p);
+ int i;
+
+ DPRINTF("set interface %d alt %d id %u\n", interface, alt,
+ aurb->packet_id);
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ if (dev->endpoint[i].interface == interface) {
+ switch (dev->endpoint[i].type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ usbredir_stop_iso_stream(dev, I2EP(i));
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (i & 0x10) {
+ usbredir_stop_interrupt_receiving(dev, I2EP(i));
+ }
+ break;
+ }
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+ }
+
+ set_alt.interface = interface;
+ set_alt.alt = alt;
+ usbredirparser_send_set_alt_setting(dev->parser, aurb->packet_id,
+ &set_alt);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_get_interface(USBRedirDevice *dev, USBPacket *p,
+ int interface)
+{
+ struct usb_redir_get_alt_setting_header get_alt;
+ AsyncURB *aurb = async_alloc(dev, p);
+
+ DPRINTF("get interface %d id %u\n", interface, aurb->packet_id);
+
+ get_alt.interface = interface;
+ aurb->get = 1;
+ usbredirparser_send_get_alt_setting(dev->parser, aurb->packet_id,
+ &get_alt);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_control(USBDevice *udev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ struct usb_redir_control_packet_header control_packet;
+ AsyncURB *aurb;
+
+ /* Special cases for certain standard device requests */
+ switch (request) {
+ case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+ DPRINTF("set address %d\n", value);
+ dev->dev.addr = value;
+ return 0;
+ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+ return usbredir_set_config(dev, p, value & 0xff);
+ case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+ return usbredir_get_config(dev, p);
+ case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+ return usbredir_set_interface(dev, p, index, value);
+ case InterfaceRequest | USB_REQ_GET_INTERFACE:
+ return usbredir_get_interface(dev, p, index);
+ }
+
+ /* "Normal" ctrl requests */
+ aurb = async_alloc(dev, p);
+
+ /* Note request is (bRequestType << 8) | bRequest */
+ DPRINTF("ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %u\n",
+ request >> 8, request & 0xff, value, index, length,
+ aurb->packet_id);
+
+ control_packet.request = request & 0xFF;
+ control_packet.requesttype = request >> 8;
+ control_packet.endpoint = control_packet.requesttype & USB_DIR_IN;
+ control_packet.value = value;
+ control_packet.index = index;
+ control_packet.length = length;
+ aurb->control_packet = control_packet;
+
+ if (control_packet.requesttype & USB_DIR_IN) {
+ usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+ &control_packet, NULL, 0);
+ } else {
+ usbredir_log_data(dev, "ctrl data out:", data, length);
+ usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+ &control_packet, data, length);
+ }
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+/*
+ * Close events can be triggered by usbredirparser_do_write which gets called
+ * from within the USBDevice data / control packet callbacks and doing a
+ * usb_detach from within these callbacks is not a good idea.
+ *
+ * So we use a bh handler to take care of close events. We also handle
+ * open events from this callback to make sure that a close directly followed
+ * by an open gets handled in the right order.
+ */
+static void usbredir_open_close_bh(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+ uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, };
+
+ usbredir_device_disconnect(dev);
+
+ if (dev->parser) {
+ usbredirparser_destroy(dev->parser);
+ dev->parser = NULL;
+ }
+
+ if (dev->cs->opened) {
+ dev->parser = qemu_oom_check(usbredirparser_create());
+ dev->parser->priv = dev;
+ dev->parser->log_func = usbredir_log;
+ dev->parser->read_func = usbredir_read;
+ dev->parser->write_func = usbredir_write;
+ dev->parser->hello_func = usbredir_hello;
+ dev->parser->device_connect_func = usbredir_device_connect;
+ dev->parser->device_disconnect_func = usbredir_device_disconnect;
+ dev->parser->interface_info_func = usbredir_interface_info;
+ dev->parser->ep_info_func = usbredir_ep_info;
+ dev->parser->configuration_status_func = usbredir_configuration_status;
+ dev->parser->alt_setting_status_func = usbredir_alt_setting_status;
+ dev->parser->iso_stream_status_func = usbredir_iso_stream_status;
+ dev->parser->interrupt_receiving_status_func =
+ usbredir_interrupt_receiving_status;
+ dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status;
+ dev->parser->control_packet_func = usbredir_control_packet;
+ dev->parser->bulk_packet_func = usbredir_bulk_packet;
+ dev->parser->iso_packet_func = usbredir_iso_packet;
+ dev->parser->interrupt_packet_func = usbredir_interrupt_packet;
+ dev->read_buf = NULL;
+ dev->read_buf_size = 0;
+
+ usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version);
+ usbredirparser_caps_set_cap(caps, usb_redir_cap_filter);
+ usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 0);
+ usbredirparser_do_write(dev->parser);
+ }
+}
+
+static void usbredir_do_attach(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+
+ usb_device_attach(&dev->dev);
+}
+
+/*
+ * chardev callbacks
+ */
+
+static int usbredir_chardev_can_read(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+
+ if (dev->parser) {
+ /* usbredir_parser_do_read will consume *all* data we give it */
+ return 1024 * 1024;
+ } else {
+ /* usbredir_open_close_bh hasn't handled the open event yet */
+ return 0;
+ }
+}
+
+static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size)
+{
+ USBRedirDevice *dev = opaque;
+
+ /* No recursion allowed! */
+ assert(dev->read_buf == NULL);
+
+ dev->read_buf = buf;
+ dev->read_buf_size = size;
+
+ usbredirparser_do_read(dev->parser);
+ /* Send any acks, etc. which may be queued now */
+ usbredirparser_do_write(dev->parser);
+}
+
+static void usbredir_chardev_event(void *opaque, int event)
+{
+ USBRedirDevice *dev = opaque;
+
+ switch (event) {
+ case CHR_EVENT_OPENED:
+ case CHR_EVENT_CLOSED:
+ qemu_bh_schedule(dev->open_close_bh);
+ break;
+ }
+}
+
+/*
+ * init + destroy
+ */
+
+static int usbredir_initfn(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ int i;
+
+ if (dev->cs == NULL) {
+ qerror_report(QERR_MISSING_PARAMETER, "chardev");
+ return -1;
+ }
+
+ if (dev->filter_str) {
+ i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|",
+ &dev->filter_rules,
+ &dev->filter_rules_count);
+ if (i) {
+ qerror_report(QERR_INVALID_PARAMETER_VALUE, "filter",
+ "a usb device filter string");
+ return -1;
+ }
+ }
+
+ dev->open_close_bh = qemu_bh_new(usbredir_open_close_bh, dev);
+ dev->attach_timer = qemu_new_timer_ms(vm_clock, usbredir_do_attach, dev);
+
+ QTAILQ_INIT(&dev->asyncq);
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ QTAILQ_INIT(&dev->endpoint[i].bufpq);
+ }
+
+ /* We'll do the attach once we receive the speed from the usb-host */
+ udev->auto_attach = 0;
+
+ /* Let the backend know we are ready */
+ qemu_chr_fe_open(dev->cs);
+ qemu_chr_add_handlers(dev->cs, usbredir_chardev_can_read,
+ usbredir_chardev_read, usbredir_chardev_event, dev);
+
+ return 0;
+}
+
+static void usbredir_cleanup_device_queues(USBRedirDevice *dev)
+{
+ AsyncURB *aurb, *next_aurb;
+ int i;
+
+ QTAILQ_FOREACH_SAFE(aurb, &dev->asyncq, next, next_aurb) {
+ async_free(dev, aurb);
+ }
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+}
+
+static void usbredir_handle_destroy(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+ qemu_chr_fe_close(dev->cs);
+ qemu_chr_delete(dev->cs);
+ /* Note must be done after qemu_chr_close, as that causes a close event */
+ qemu_bh_delete(dev->open_close_bh);
+
+ qemu_del_timer(dev->attach_timer);
+ qemu_free_timer(dev->attach_timer);
+
+ usbredir_cleanup_device_queues(dev);
+
+ if (dev->parser) {
+ usbredirparser_destroy(dev->parser);
+ }
+
+ free(dev->filter_rules);
+}
+
+static int usbredir_check_filter(USBRedirDevice *dev)
+{
+ if (dev->interface_info.interface_count == 0) {
+ ERROR("No interface info for device\n");
+ goto error;
+ }
+
+ if (dev->filter_rules) {
+ if (!usbredirparser_peer_has_cap(dev->parser,
+ usb_redir_cap_connect_device_version)) {
+ ERROR("Device filter specified and peer does not have the "
+ "connect_device_version capability\n");
+ goto error;
+ }
+
+ if (usbredirfilter_check(
+ dev->filter_rules,
+ dev->filter_rules_count,
+ dev->device_info.device_class,
+ dev->device_info.device_subclass,
+ dev->device_info.device_protocol,
+ dev->interface_info.interface_class,
+ dev->interface_info.interface_subclass,
+ dev->interface_info.interface_protocol,
+ dev->interface_info.interface_count,
+ dev->device_info.vendor_id,
+ dev->device_info.product_id,
+ dev->device_info.device_version_bcd,
+ 0) != 0) {
+ goto error;
+ }
+ }
+
+ return 0;
+
+error:
+ usbredir_device_disconnect(dev);
+ if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) {
+ usbredirparser_send_filter_reject(dev->parser);
+ usbredirparser_do_write(dev->parser);
+ }
+ return -1;
+}
+
+/*
+ * usbredirparser packet complete callbacks
+ */
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+ int status, int actual_len)
+{
+ switch (status) {
+ case usb_redir_success:
+ return actual_len;
+ case usb_redir_stall:
+ return USB_RET_STALL;
+ case usb_redir_cancelled:
+ WARNING("returning cancelled packet to HC?\n");
+ return USB_RET_NAK;
+ case usb_redir_inval:
+ WARNING("got invalid param error from usb-host?\n");
+ return USB_RET_NAK;
+ case usb_redir_ioerror:
+ case usb_redir_timeout:
+ default:
+ return USB_RET_IOERROR;
+ }
+}
+
+static void usbredir_hello(void *priv, struct usb_redir_hello_header *h)
+{
+ USBRedirDevice *dev = priv;
+
+ /* Try to send the filter info now that we've the usb-host's caps */
+ if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) &&
+ dev->filter_rules) {
+ usbredirparser_send_filter_filter(dev->parser, dev->filter_rules,
+ dev->filter_rules_count);
+ usbredirparser_do_write(dev->parser);
+ }
+}
+
+static void usbredir_device_connect(void *priv,
+ struct usb_redir_device_connect_header *device_connect)
+{
+ USBRedirDevice *dev = priv;
+ const char *speed;
+
+ if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+ ERROR("Received device connect while already connected\n");
+ return;
+ }
+
+ switch (device_connect->speed) {
+ case usb_redir_speed_low:
+ speed = "low speed";
+ dev->dev.speed = USB_SPEED_LOW;
+ break;
+ case usb_redir_speed_full:
+ speed = "full speed";
+ dev->dev.speed = USB_SPEED_FULL;
+ break;
+ case usb_redir_speed_high:
+ speed = "high speed";
+ dev->dev.speed = USB_SPEED_HIGH;
+ break;
+ case usb_redir_speed_super:
+ speed = "super speed";
+ dev->dev.speed = USB_SPEED_SUPER;
+ break;
+ default:
+ speed = "unknown speed";
+ dev->dev.speed = USB_SPEED_FULL;
+ }
+
+ if (usbredirparser_peer_has_cap(dev->parser,
+ usb_redir_cap_connect_device_version)) {
+ INFO("attaching %s device %04x:%04x version %d.%d class %02x\n",
+ speed, device_connect->vendor_id, device_connect->product_id,
+ ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 +
+ ((device_connect->device_version_bcd & 0x0f00) >> 8),
+ ((device_connect->device_version_bcd & 0x00f0) >> 4) * 10 +
+ ((device_connect->device_version_bcd & 0x000f) >> 0),
+ device_connect->device_class);
+ } else {
+ INFO("attaching %s device %04x:%04x class %02x\n", speed,
+ device_connect->vendor_id, device_connect->product_id,
+ device_connect->device_class);
+ }
+
+ dev->dev.speedmask = (1 << dev->dev.speed);
+ dev->device_info = *device_connect;
+
+ if (usbredir_check_filter(dev)) {
+ WARNING("Device %04x:%04x rejected by device filter, not attaching\n",
+ device_connect->vendor_id, device_connect->product_id);
+ return;
+ }
+
+ qemu_mod_timer(dev->attach_timer, dev->next_attach_time);
+}
+
+static void usbredir_device_disconnect(void *priv)
+{
+ USBRedirDevice *dev = priv;
+ int i;
+
+ /* Stop any pending attaches */
+ qemu_del_timer(dev->attach_timer);
+
+ if (dev->dev.attached) {
+ usb_device_detach(&dev->dev);
+ /*
+ * Delay next usb device attach to give the guest a chance to see
+ * see the detach / attach in case of quick close / open succession
+ */
+ dev->next_attach_time = qemu_get_clock_ms(vm_clock) + 200;
+ }
+
+ /* Reset state so that the next dev connected starts with a clean slate */
+ usbredir_cleanup_device_queues(dev);
+ memset(dev->endpoint, 0, sizeof(dev->endpoint));
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ QTAILQ_INIT(&dev->endpoint[i].bufpq);
+ }
+ usb_ep_init(&dev->dev);
+ dev->interface_info.interface_count = 0;
+}
+
+static void usbredir_interface_info(void *priv,
+ struct usb_redir_interface_info_header *interface_info)
+{
+ USBRedirDevice *dev = priv;
+
+ dev->interface_info = *interface_info;
+
+ /*
+ * If we receive interface info after the device has already been
+ * connected (ie on a set_config), re-check the filter.
+ */
+ if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+ if (usbredir_check_filter(dev)) {
+ ERROR("Device no longer matches filter after interface info "
+ "change, disconnecting!\n");
+ }
+ }
+}
+
+static void usbredir_ep_info(void *priv,
+ struct usb_redir_ep_info_header *ep_info)
+{
+ USBRedirDevice *dev = priv;
+ struct USBEndpoint *usb_ep;
+ int i;
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ dev->endpoint[i].type = ep_info->type[i];
+ dev->endpoint[i].interval = ep_info->interval[i];
+ dev->endpoint[i].interface = ep_info->interface[i];
+ switch (dev->endpoint[i].type) {
+ case usb_redir_type_invalid:
+ break;
+ case usb_redir_type_iso:
+ case usb_redir_type_interrupt:
+ if (dev->endpoint[i].interval == 0) {
+ ERROR("Received 0 interval for isoc or irq endpoint\n");
+ usbredir_device_disconnect(dev);
+ }
+ /* Fall through */
+ case usb_redir_type_control:
+ case usb_redir_type_bulk:
+ DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i),
+ dev->endpoint[i].type, dev->endpoint[i].interface);
+ break;
+ default:
+ ERROR("Received invalid endpoint type\n");
+ usbredir_device_disconnect(dev);
+ return;
+ }
+ usb_ep = usb_ep_get(&dev->dev,
+ (i & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT,
+ i & 0x0f);
+ usb_ep->type = dev->endpoint[i].type;
+ usb_ep->ifnum = dev->endpoint[i].interface;
+ }
+}
+
+static void usbredir_configuration_status(void *priv, uint32_t id,
+ struct usb_redir_configuration_status_header *config_status)
+{
+ USBRedirDevice *dev = priv;
+ AsyncURB *aurb;
+ int len = 0;
+
+ DPRINTF("set config status %d config %d id %u\n", config_status->status,
+ config_status->configuration, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+ if (aurb->packet) {
+ if (aurb->get) {
+ dev->dev.data_buf[0] = config_status->configuration;
+ len = 1;
+ }
+ aurb->packet->result =
+ usbredir_handle_status(dev, config_status->status, len);
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+}
+
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+ struct usb_redir_alt_setting_status_header *alt_setting_status)
+{
+ USBRedirDevice *dev = priv;
+ AsyncURB *aurb;
+ int len = 0;
+
+ DPRINTF("alt status %d intf %d alt %d id: %u\n",
+ alt_setting_status->status,
+ alt_setting_status->interface,
+ alt_setting_status->alt, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+ if (aurb->packet) {
+ if (aurb->get) {
+ dev->dev.data_buf[0] = alt_setting_status->alt;
+ len = 1;
+ }
+ aurb->packet->result =
+ usbredir_handle_status(dev, alt_setting_status->status, len);
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+}
+
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+ struct usb_redir_iso_stream_status_header *iso_stream_status)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = iso_stream_status->endpoint;
+
+ DPRINTF("iso status %d ep %02X id %u\n", iso_stream_status->status,
+ ep, id);
+
+ if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) {
+ return;
+ }
+
+ dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status;
+ if (iso_stream_status->status == usb_redir_stall) {
+ DPRINTF("iso stream stopped by peer ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].iso_started = 0;
+ }
+}
+
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+ struct usb_redir_interrupt_receiving_status_header
+ *interrupt_receiving_status)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = interrupt_receiving_status->endpoint;
+
+ DPRINTF("interrupt recv status %d ep %02X id %u\n",
+ interrupt_receiving_status->status, ep, id);
+
+ if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) {
+ return;
+ }
+
+ dev->endpoint[EP2I(ep)].interrupt_error =
+ interrupt_receiving_status->status;
+ if (interrupt_receiving_status->status == usb_redir_stall) {
+ DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 0;
+ }
+}
+
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+ struct usb_redir_bulk_streams_status_header *bulk_streams_status)
+{
+}
+
+static void usbredir_control_packet(void *priv, uint32_t id,
+ struct usb_redir_control_packet_header *control_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ int len = control_packet->length;
+ AsyncURB *aurb;
+
+ DPRINTF("ctrl-in status %d len %d id %u\n", control_packet->status,
+ len, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ free(data);
+ return;
+ }
+
+ aurb->control_packet.status = control_packet->status;
+ aurb->control_packet.length = control_packet->length;
+ if (memcmp(&aurb->control_packet, control_packet,
+ sizeof(*control_packet))) {
+ ERROR("return control packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ len = usbredir_handle_status(dev, control_packet->status, len);
+ if (len > 0) {
+ usbredir_log_data(dev, "ctrl data in:", data, data_len);
+ if (data_len <= sizeof(dev->dev.data_buf)) {
+ memcpy(dev->dev.data_buf, data, data_len);
+ } else {
+ ERROR("ctrl buffer too small (%d > %zu)\n",
+ data_len, sizeof(dev->dev.data_buf));
+ len = USB_RET_STALL;
+ }
+ }
+ aurb->packet->result = len;
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ free(data);
+}
+
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+ struct usb_redir_bulk_packet_header *bulk_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = bulk_packet->endpoint;
+ int len = bulk_packet->length;
+ AsyncURB *aurb;
+
+ DPRINTF("bulk-in status %d ep %02X len %d id %u\n", bulk_packet->status,
+ ep, len, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ free(data);
+ return;
+ }
+
+ if (aurb->bulk_packet.endpoint != bulk_packet->endpoint ||
+ aurb->bulk_packet.stream_id != bulk_packet->stream_id) {
+ ERROR("return bulk packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ len = usbredir_handle_status(dev, bulk_packet->status, len);
+ if (len > 0) {
+ usbredir_log_data(dev, "bulk data in:", data, data_len);
+ if (data_len <= aurb->packet->iov.size) {
+ usb_packet_copy(aurb->packet, data, data_len);
+ } else {
+ ERROR("bulk buffer too small (%d > %zd)\n", data_len,
+ aurb->packet->iov.size);
+ len = USB_RET_STALL;
+ }
+ }
+ aurb->packet->result = len;
+ usb_packet_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ free(data);
+}
+
+static void usbredir_iso_packet(void *priv, uint32_t id,
+ struct usb_redir_iso_packet_header *iso_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = iso_packet->endpoint;
+
+ DPRINTF2("iso-in status %d ep %02X len %d id %u\n", iso_packet->status, ep,
+ data_len, id);
+
+ if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) {
+ ERROR("received iso packet for non iso endpoint %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ if (dev->endpoint[EP2I(ep)].iso_started == 0) {
+ DPRINTF("received iso packet for non started stream ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ /* bufp_alloc also adds the packet to the ep queue */
+ bufp_alloc(dev, data, data_len, iso_packet->status, ep);
+}
+
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+ struct usb_redir_interrupt_packet_header *interrupt_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = interrupt_packet->endpoint;
+
+ DPRINTF("interrupt-in status %d ep %02X len %d id %u\n",
+ interrupt_packet->status, ep, data_len, id);
+
+ if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) {
+ ERROR("received int packet for non interrupt endpoint %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ if (ep & USB_DIR_IN) {
+ if (dev->endpoint[EP2I(ep)].interrupt_started == 0) {
+ DPRINTF("received int packet while not started ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ /* bufp_alloc also adds the packet to the ep queue */
+ bufp_alloc(dev, data, data_len, interrupt_packet->status, ep);
+ } else {
+ int len = interrupt_packet->length;
+
+ AsyncURB *aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+
+ if (aurb->interrupt_packet.endpoint != interrupt_packet->endpoint) {
+ ERROR("return int packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ aurb->packet->result = usbredir_handle_status(dev,
+ interrupt_packet->status, len);
+ usb_packet_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ }
+}
+
+static Property usbredir_properties[] = {
+ DEFINE_PROP_CHR("chardev", USBRedirDevice, cs),
+ DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, 0),
+ DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usbredir_class_initfn(ObjectClass *klass, void *data)
+{
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ uc->init = usbredir_initfn;
+ uc->product_desc = "USB Redirection Device";
+ uc->handle_destroy = usbredir_handle_destroy;
+ uc->cancel_packet = usbredir_cancel_packet;
+ uc->handle_reset = usbredir_handle_reset;
+ uc->handle_data = usbredir_handle_data;
+ uc->handle_control = usbredir_handle_control;
+ dc->props = usbredir_properties;
+}
+
+static TypeInfo usbredir_dev_info = {
+ .name = "usb-redir",
+ .parent = TYPE_USB_DEVICE,
+ .instance_size = sizeof(USBRedirDevice),
+ .class_init = usbredir_class_initfn,
+};
+
+static void usbredir_register_types(void)
+{
+ type_register_static(&usbredir_dev_info);
+}
+
+type_init(usbredir_register_types)
diff --git a/hw/versatilepb.c b/hw/versatilepb.c
index b9102f4a54..c1687a5b89 100644
--- a/hw/versatilepb.c
+++ b/hw/versatilepb.c
@@ -13,7 +13,6 @@
#include "net.h"
#include "sysemu.h"
#include "pci.h"
-#include "usb-ohci.h"
#include "boards.h"
#include "blockdev.h"
#include "exec-memory.h"
@@ -240,7 +239,7 @@ static void versatile_init(ram_addr_t ram_size,
}
}
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 08:57:08 +0000