diff options
Diffstat (limited to 'hw/i386/acpi-build.c')
| -rw-r--r-- | hw/i386/acpi-build.c | 127 |
1 files changed, 120 insertions, 7 deletions
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index 266d9b534b..12ff55fcfb 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -2517,12 +2517,105 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker) */ #define IOAPIC_SB_DEVID (uint64_t)PCI_BUILD_BDF(0, PCI_DEVFN(0x14, 0)) +/* + * Insert IVHD entry for device and recurse, insert alias, or insert range as + * necessary for the PCI topology. + */ +static void +insert_ivhd(PCIBus *bus, PCIDevice *dev, void *opaque) +{ + GArray *table_data = opaque; + uint32_t entry; + + /* "Select" IVHD entry, type 0x2 */ + entry = PCI_BUILD_BDF(pci_bus_num(bus), dev->devfn) << 8 | 0x2; + build_append_int_noprefix(table_data, entry, 4); + + if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) { + PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev)); + uint8_t sec = pci_bus_num(sec_bus); + uint8_t sub = dev->config[PCI_SUBORDINATE_BUS]; + + if (pci_bus_is_express(sec_bus)) { + /* + * Walk the bus if there are subordinates, otherwise use a range + * to cover an entire leaf bus. We could potentially also use a + * range for traversed buses, but we'd need to take care not to + * create both Select and Range entries covering the same device. + * This is easier and potentially more compact. + * + * An example bare metal system seems to use Select entries for + * root ports without a slot (ie. built-ins) and Range entries + * when there is a slot. The same system also only hard-codes + * the alias range for an onboard PCIe-to-PCI bridge, apparently + * making no effort to support nested bridges. We attempt to + * be more thorough here. + */ + if (sec == sub) { /* leaf bus */ + /* "Start of Range" IVHD entry, type 0x3 */ + entry = PCI_BUILD_BDF(sec, PCI_DEVFN(0, 0)) << 8 | 0x3; + build_append_int_noprefix(table_data, entry, 4); + /* "End of Range" IVHD entry, type 0x4 */ + entry = PCI_BUILD_BDF(sub, PCI_DEVFN(31, 7)) << 8 | 0x4; + build_append_int_noprefix(table_data, entry, 4); + } else { + pci_for_each_device(sec_bus, sec, insert_ivhd, table_data); + } + } else { + /* + * If the secondary bus is conventional, then we need to create an + * Alias range for everything downstream. The range covers the + * first devfn on the secondary bus to the last devfn on the + * subordinate bus. The alias target depends on legacy versus + * express bridges, just as in pci_device_iommu_address_space(). + * DeviceIDa vs DeviceIDb as per the AMD IOMMU spec. + */ + uint16_t dev_id_a, dev_id_b; + + dev_id_a = PCI_BUILD_BDF(sec, PCI_DEVFN(0, 0)); + + if (pci_is_express(dev) && + pcie_cap_get_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE) { + dev_id_b = dev_id_a; + } else { + dev_id_b = PCI_BUILD_BDF(pci_bus_num(bus), dev->devfn); + } + + /* "Alias Start of Range" IVHD entry, type 0x43, 8 bytes */ + build_append_int_noprefix(table_data, dev_id_a << 8 | 0x43, 4); + build_append_int_noprefix(table_data, dev_id_b << 8 | 0x0, 4); + + /* "End of Range" IVHD entry, type 0x4 */ + entry = PCI_BUILD_BDF(sub, PCI_DEVFN(31, 7)) << 8 | 0x4; + build_append_int_noprefix(table_data, entry, 4); + } + } +} + +/* For all PCI host bridges, walk and insert IVHD entries */ +static int +ivrs_host_bridges(Object *obj, void *opaque) +{ + GArray *ivhd_blob = opaque; + + if (object_dynamic_cast(obj, TYPE_PCI_HOST_BRIDGE)) { + PCIBus *bus = PCI_HOST_BRIDGE(obj)->bus; + + if (bus) { + pci_for_each_device(bus, pci_bus_num(bus), insert_ivhd, ivhd_blob); + } + } + + return 0; +} + static void build_amd_iommu(GArray *table_data, BIOSLinker *linker) { - int ivhd_table_len = 28; + int ivhd_table_len = 24; int iommu_start = table_data->len; AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default()); + GArray *ivhd_blob = g_array_new(false, true, 1); /* IVRS header */ acpi_data_push(table_data, sizeof(AcpiTableHeader)); @@ -2544,12 +2637,34 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker) 1); /* + * A PCI bus walk, for each PCI host bridge, is necessary to create a + * complete set of IVHD entries. Do this into a separate blob so that we + * can calculate the total IVRS table length here and then append the new + * blob further below. Fall back to an entry covering all devices, which + * is sufficient when no aliases are present. + */ + object_child_foreach_recursive(object_get_root(), + ivrs_host_bridges, ivhd_blob); + + if (!ivhd_blob->len) { + /* + * Type 1 device entry reporting all devices + * These are 4-byte device entries currently reporting the range of + * Refer to Spec - Table 95:IVHD Device Entry Type Codes(4-byte) + */ + build_append_int_noprefix(ivhd_blob, 0x0000001, 4); + } + + ivhd_table_len += ivhd_blob->len; + + /* * When interrupt remapping is supported, we add a special IVHD device * for type IO-APIC. */ if (x86_iommu_ir_supported(x86_iommu_get_default())) { ivhd_table_len += 8; } + /* IVHD length */ build_append_int_noprefix(table_data, ivhd_table_len, 2); /* DeviceID */ @@ -2569,12 +2684,10 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker) (1UL << 2) | /* GTSup */ (1UL << 6), /* GASup */ 4); - /* - * Type 1 device entry reporting all devices - * These are 4-byte device entries currently reporting the range of - * Refer to Spec - Table 95:IVHD Device Entry Type Codes(4-byte) - */ - build_append_int_noprefix(table_data, 0x0000001, 4); + + /* IVHD entries as found above */ + g_array_append_vals(table_data, ivhd_blob->data, ivhd_blob->len); + g_array_free(ivhd_blob, TRUE); /* * Add a special IVHD device type. |