diff options
-rw-r--r-- | Makefile.target | 2 | ||||
-rw-r--r-- | hw/integratorcp.c | 27 | ||||
-rw-r--r-- | hw/smc91c111.c | 680 | ||||
-rw-r--r-- | vl.h | 3 |
4 files changed, 698 insertions, 14 deletions
diff --git a/Makefile.target b/Makefile.target index dd33e790ae..adc8537139 100644 --- a/Makefile.target +++ b/Makefile.target @@ -325,7 +325,7 @@ VL_OBJS+= slavio_timer.o slavio_serial.o slavio_misc.o fdc.o esp.o endif endif ifeq ($(TARGET_BASE_ARCH), arm) -VL_OBJS+= integratorcp.o ps2.o +VL_OBJS+= integratorcp.o ps2.o smc91c111.o endif ifdef CONFIG_GDBSTUB VL_OBJS+=gdbstub.o diff --git a/hw/integratorcp.c b/hw/integratorcp.c index 957a94389c..1979c39439 100644 --- a/hw/integratorcp.c +++ b/hw/integratorcp.c @@ -305,8 +305,6 @@ typedef struct icp_pic_state int parent_irq; } icp_pic_state; -static void icp_pic_set_level(icp_pic_state *, int, int); - static void icp_pic_update(icp_pic_state *s) { CPUState *env; @@ -314,8 +312,8 @@ static void icp_pic_update(icp_pic_state *s) uint32_t flags; flags = (s->level & s->irq_enabled); - icp_pic_set_level((icp_pic_state *)s->parent, s->parent_irq, - flags != 0); + pic_set_irq_new(s->parent, s->parent_irq, + flags != 0); return; } /* Raise CPU interrupt. */ @@ -332,12 +330,13 @@ static void icp_pic_update(icp_pic_state *s) } } -static void icp_pic_set_level(icp_pic_state *s, int n, int level) +void pic_set_irq_new(void *opaque, int irq, int level) { + icp_pic_state *s = (icp_pic_state *)opaque; if (level) - s->level |= 1 << n; + s->level |= 1 << irq; else - s->level &= ~(1 << n); + s->level &= ~(1 << irq); icp_pic_update(s); } @@ -385,11 +384,11 @@ static void icp_pic_write(void *opaque, target_phys_addr_t offset, break; case 4: /* INT_SOFTSET */ if (value & 1) - icp_pic_set_level(s, 0, 1); + pic_set_irq_new(s, 0, 1); break; case 5: /* INT_SOFTCLR */ if (value & 1) - icp_pic_set_level(s, 0, 0); + pic_set_irq_new(s, 0, 0); break; case 10: /* FRQ_ENABLESET */ s->fiq_enabled |= value; @@ -513,9 +512,9 @@ static void icp_pit_update(icp_pit_state *s, int64_t now) /* Update interrupts. */ for (n = 0; n < 3; n++) { if (s->int_level[n] && (s->control[n] & 0x20)) { - icp_pic_set_level(s->pic, 5 + n, 1); + pic_set_irq_new(s->pic, 5 + n, 1); } else { - icp_pic_set_level(s->pic, 5 + n, 0); + pic_set_irq_new(s->pic, 5 + n, 0); } if (next - s->expires[n] < 0) next = s->expires[n]; @@ -731,7 +730,7 @@ static void pl011_update(pl011_state *s) uint32_t flags; flags = s->int_level & s->int_enabled; - icp_pic_set_level(s->pic, s->irq, flags != 0); + pic_set_irq_new(s->pic, s->irq, flags != 0); } static uint32_t pl011_read(void *opaque, target_phys_addr_t offset) @@ -1020,7 +1019,7 @@ static void icp_kmi_update(void *opaque, int level) s->pending = level; raise = (s->pending && (s->cr & 0x10) != 0) || (s->cr & 0x08) != 0; - icp_pic_set_level(s->pic, s->irq, raise); + pic_set_irq_new(s->pic, s->irq, raise); } static uint32_t icp_kmi_read(void *opaque, target_phys_addr_t offset) @@ -1196,6 +1195,8 @@ static void integratorcp_init(int ram_size, int vga_ram_size, int boot_device, icp_control_init(0xcb000000); icp_kmi_init(0x18000000, pic, 3, 0); icp_kmi_init(0x19000000, pic, 4, 1); + if (nd_table[0].vlan) + smc91c111_init(&nd_table[0], 0xc8000000, pic, 27); /* Load the kernel. */ if (!kernel_filename) { diff --git a/hw/smc91c111.c b/hw/smc91c111.c new file mode 100644 index 0000000000..54433c4320 --- /dev/null +++ b/hw/smc91c111.c @@ -0,0 +1,680 @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licenced under the GPL + */ + +#include "vl.h" +/* For crc32 */ +#include <zlib.h> + +/* Number of 2k memory pages available. */ +#define NUM_PACKETS 4 + +typedef struct { + uint32_t base; + VLANClientState *vc; + uint16_t tcr; + uint16_t rcr; + uint16_t cr; + uint16_t ctr; + uint16_t gpr; + uint16_t ptr; + uint16_t ercv; + void *pic; + int irq; + int bank; + int packet_num; + int tx_alloc; + /* Bitmask of allocated packets. */ + int allocated; + int tx_fifo_len; + int tx_fifo[NUM_PACKETS]; + int rx_fifo_len; + int rx_fifo[NUM_PACKETS]; + /* Packet buffer memory. */ + uint8_t data[2048][NUM_PACKETS]; + uint8_t int_level; + uint8_t int_mask; + uint8_t macaddr[6]; +} smc91c111_state; + +#define RCR_SOFT_RST 0x8000 +#define RCR_STRIP_CRC 0x0200 +#define RCR_RXEN 0x0100 + +#define TCR_EPH_LOOP 0x2000 +#define TCR_NOCRC 0x0100 +#define TCR_PAD_EN 0x0080 +#define TCR_FORCOL 0x0004 +#define TCR_LOOP 0x0002 +#define TCR_TXEN 0x0001 + +#define INT_MD 0x80 +#define INT_ERCV 0x40 +#define INT_EPH 0x20 +#define INT_RX_OVRN 0x10 +#define INT_ALLOC 0x08 +#define INT_TX_EMPTY 0x04 +#define INT_TX 0x02 +#define INT_RCV 0x01 + +#define CTR_AUTO_RELEASE 0x0800 +#define CTR_RELOAD 0x0002 +#define CTR_STORE 0x0001 + +#define RS_ALGNERR 0x8000 +#define RS_BRODCAST 0x4000 +#define RS_BADCRC 0x2000 +#define RS_ODDFRAME 0x1000 +#define RS_TOOLONG 0x0800 +#define RS_TOOSHORT 0x0400 +#define RS_MULTICAST 0x0001 + +/* Update interrupt status. */ +static void smc91c111_update(smc91c111_state *s) +{ + int level; + + if (s->tx_fifo_len == 0) + s->int_level |= INT_TX_EMPTY; + level = (s->int_level & s->int_mask) != 0; + pic_set_irq_new(s->pic, s->irq, level); +} + +/* Try to allocate a packet. Returns 0x80 on failure. */ +static int smc91c111_allocate_packet(smc91c111_state *s) +{ + int i; + if (s->allocated == (1 << NUM_PACKETS) - 1) { + return 0x80; + } + + for (i = 0; i < NUM_PACKETS; i++) { + if ((s->allocated & (1 << i)) == 0) + break; + } + s->allocated |= 1 << i; + return i; +} + + +/* Process a pending TX allocate. */ +static void smc91c111_tx_alloc(smc91c111_state *s) +{ + s->tx_alloc = smc91c111_allocate_packet(s); + if (s->tx_alloc == 0x80) + return; + s->int_level |= INT_ALLOC; + smc91c111_update(s); +} + +/* Remove and item from the RX FIFO. */ +static void smc91c111_pop_rx_fifo(smc91c111_state *s) +{ + int i; + + s->rx_fifo_len--; + if (s->rx_fifo_len) { + for (i = 0; i < s->rx_fifo_len; i++) + s->rx_fifo[i] = s->rx_fifo[i + 1]; + s->int_level |= INT_RCV; + } else { + s->int_level &= ~INT_RCV; + } + smc91c111_update(s); +} + +/* Release the memory allocated to a packet. */ +static void smc91c111_release_packet(smc91c111_state *s, int packet) +{ + s->allocated &= ~(1 << packet); + if (s->tx_alloc == 0x80) + smc91c111_tx_alloc(s); +} + +/* Flush the TX FIFO. */ +static void smc91c111_do_tx(smc91c111_state *s) +{ + int i; + int len; + int control; + int add_crc; + uint32_t crc; + int packetnum; + uint8_t *p; + + if ((s->tcr & TCR_TXEN) == 0) + return; + if (s->tx_fifo_len == 0) + return; + for (i = 0; i < s->tx_fifo_len; i++) { + packetnum = s->tx_fifo[i]; + p = &s->data[packetnum][0]; + /* Set status word. */ + *(p++) = 0x01; + *(p++) = 0x40; + len = *(p++); + len |= ((int)*(p++)) << 8; + len -= 6; + control = p[len + 1]; + if (control & 0x20) + len++; + /* ??? This overwrites the data following the buffer. + Don't know what real hardware does. */ + if (len < 64 && (s->tcr & TCR_PAD_EN)) { + memset(p + len, 0, 64 - len); + len = 64; + } +#if 0 + /* The card is supposed to append the CRC to the frame. However + none of the other network traffic has the CRC appended. + Suspect this is low level ethernet detail we don't need to worry + about. */ + add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0; + if (add_crc) { + crc = crc32(~0, p, len); + memcpy(p + len, &crc, 4); + len += 4; + } +#else + add_crc = 0; +#endif + if (s->ctr & CTR_AUTO_RELEASE) + smc91c111_release_packet(s, packetnum); + qemu_send_packet(s->vc, p, len); + } + s->tx_fifo_len = 0; + if ((s->ctr & CTR_AUTO_RELEASE) == 0) + s->int_level |= INT_TX; + smc91c111_update(s); +} + +/* Add a packet to the TX FIFO. */ +static void smc91c111_queue_tx(smc91c111_state *s, int packet) +{ + if (s->tx_fifo_len == NUM_PACKETS) + return; + s->tx_fifo[s->tx_fifo_len++] = packet; + smc91c111_do_tx(s); +} + +static void smc91c111_reset(smc91c111_state *s) +{ + s->bank = 0; + s->tx_fifo_len = 0; + s->rx_fifo_len = 0; + s->allocated = 0; + s->packet_num = 0; + s->tx_alloc = 0; + s->tcr = 0; + s->rcr = 0; + s->cr = 0xa0b1; + s->ctr = 0x1210; + s->ptr = 0; + s->ercv = 0x1f; + s->int_level = INT_TX_EMPTY; + s->int_mask = 0; + smc91c111_update(s); +} + +#define SET_LOW(name, val) s->name = (s->name & 0xff00) | val +#define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8) + +static void smc91c111_writeb(void *opaque, target_phys_addr_t offset, + uint32_t value) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + + offset -= s->base; + if (offset == 14) { + s->bank = value; + return; + } + if (offset == 15) + return; + switch (s->bank) { + case 0: + switch (offset) { + case 0: /* TCR */ + SET_LOW(tcr, value); + return; + case 1: + SET_HIGH(tcr, value); + return; + case 4: /* RCR */ + SET_LOW(rcr, value); + return; + case 5: + SET_HIGH(rcr, value); + if (s->rcr & RCR_SOFT_RST) + smc91c111_reset(s); + return; + case 10: case 11: /* RPCR */ + /* Ignored */ + return; + } + break; + + case 1: + switch (offset) { + case 0: /* CONFIG */ + SET_LOW(cr, value); + return; + case 1: + SET_HIGH(cr,value); + return; + case 2: case 3: /* BASE */ + case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ + /* Not implemented. */ + return; + case 10: /* Genral Purpose */ + SET_LOW(gpr, value); + return; + case 11: + SET_HIGH(gpr, value); + return; + case 12: /* Control */ + if (value & 1) + fprintf(stderr, "smc91c111:EEPROM store not implemented\n"); + if (value & 2) + fprintf(stderr, "smc91c111:EEPROM reload not implemented\n"); + value &= ~3; + SET_LOW(ctr, value); + return; + case 13: + SET_HIGH(ctr, value); + return; + } + break; + + case 2: + switch (offset) { + case 0: /* MMU Command */ + switch (value >> 5) { + case 0: /* no-op */ + break; + case 1: /* Allocate for TX. */ + s->tx_alloc = 0x80; + s->int_level &= ~INT_ALLOC; + smc91c111_update(s); + smc91c111_tx_alloc(s); + break; + case 2: /* Reset MMU. */ + s->allocated = 0; + s->tx_fifo_len = 0; + s->rx_fifo_len = 0; + s->tx_alloc = 0; + break; + case 3: /* Remove from RX FIFO. */ + smc91c111_pop_rx_fifo(s); + break; + case 4: /* Remove from RX FIFO and release. */ + if (s->rx_fifo_len > 0) { + smc91c111_release_packet(s, s->rx_fifo[0]); + } + smc91c111_pop_rx_fifo(s); + break; + case 5: /* Release. */ + smc91c111_release_packet(s, s->packet_num); + break; + case 6: /* Add to TX FIFO. */ + smc91c111_queue_tx(s, s->packet_num); + break; + case 7: /* Reset TX FIFO. */ + s->tx_fifo_len = 0; + break; + } + return; + case 1: + /* Ignore. */ + return; + case 2: /* Packet Number Register */ + s->packet_num = value; + return; + case 3: case 4: case 5: + /* Should be readonly, but linux writes to them anyway. Ignore. */ + return; + case 6: /* Pointer */ + SET_LOW(ptr, value); + return; + case 7: + SET_HIGH(ptr, value); + return; + case 8: case 9: case 10: case 11: /* Data */ + { + int p; + int n; + + if (s->ptr & 0x8000) + n = s->rx_fifo[0]; + else + n = s->packet_num; + p = s->ptr & 0x07ff; + if (s->ptr & 0x4000) { + s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff); + } else { + p += (offset & 3); + } + s->data[n][p] = value; + } + return; + case 12: /* Interrupt ACK. */ + s->int_level &= ~(value & 0xd6); + smc91c111_update(s); + return; + case 13: /* Interrupt mask. */ + s->int_mask = value; + smc91c111_update(s); + return; + } + break;; + + case 3: + switch (offset) { + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: + /* Multicast table. */ + /* Not implemented. */ + return; + case 8: case 9: /* Management Interface. */ + /* Not implemented. */ + return; + case 12: /* Early receive. */ + s->ercv = value & 0x1f; + case 13: + /* Ignore. */ + return; + } + break; + } + cpu_abort (cpu_single_env, "smc91c111_write: Bad reg %d:%x\n", + s->bank, offset); +} + +static uint32_t smc91c111_readb(void *opaque, target_phys_addr_t offset) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + + offset -= s->base; + if (offset == 14) { + return s->bank; + } + if (offset == 15) + return 0x33; + switch (s->bank) { + case 0: + switch (offset) { + case 0: /* TCR */ + return s->tcr & 0xff; + case 1: + return s->tcr >> 8; + case 2: /* EPH Status */ + return 0; + case 3: + return 0x40; + case 4: /* RCR */ + return s->rcr & 0xff; + case 5: + return s->rcr >> 8; + case 6: /* Counter */ + case 7: + /* Not implemented. */ + return 0; + case 8: /* Free memory available. */ + { + int i; + int n; + n = 0; + for (i = 0; i < NUM_PACKETS; i++) { + if (s->allocated & (1 << i)) + n++; + } + return n; + } + case 9: /* Memory size. */ + return NUM_PACKETS; + case 10: case 11: /* RPCR */ + /* Not implemented. */ + return 0; + } + break; + + case 1: + switch (offset) { + case 0: /* CONFIG */ + return s->cr & 0xff; + case 1: + return s->cr >> 8; + case 2: case 3: /* BASE */ + /* Not implemented. */ + return 0; + case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ + return s->macaddr[offset - 4]; + case 10: /* General Purpose */ + return s->gpr & 0xff; + case 11: + return s->gpr >> 8; + case 12: /* Control */ + return s->ctr & 0xff; + case 13: + return s->ctr >> 8; + } + break; + + case 2: + switch (offset) { + case 0: case 1: /* MMUCR Busy bit. */ + return 0; + case 2: /* Packet Number. */ + return s->packet_num; + case 3: /* Allocation Result. */ + return s->tx_alloc; + case 4: /* TX FIFO */ + if (s->tx_fifo_len == 0) + return 0x80; + else + return s->tx_fifo[0]; + case 5: /* RX FIFO */ + if (s->rx_fifo_len == 0) + return 0x80; + else + return s->rx_fifo[0]; + case 6: /* Pointer */ + return s->ptr & 0xff; + case 7: + return (s->ptr >> 8) & 0xf7; + case 8: case 9: case 10: case 11: /* Data */ + { + int p; + int n; + + if (s->ptr & 0x8000) + n = s->rx_fifo[0]; + else + n = s->packet_num; + p = s->ptr & 0x07ff; + if (s->ptr & 0x4000) { + s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff); + } else { + p += (offset & 3); + } + return s->data[n][p]; + } + case 12: /* Interrupt status. */ + return s->int_level; + case 13: /* Interrupt mask. */ + return s->int_mask; + } + break; + + case 3: + switch (offset) { + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: + /* Multicast table. */ + /* Not implemented. */ + return 0; + case 8: /* Management Interface. */ + /* Not implemented. */ + return 0x30; + case 9: + return 0x33; + case 10: /* Revision. */ + return 0x91; + case 11: + return 0x33; + case 12: + return s->ercv; + case 13: + return 0; + } + break; + } + cpu_abort (cpu_single_env, "smc91c111_read: Bad reg %d:%x\n", + s->bank, offset); + return 0; +} + +static void smc91c111_writew(void *opaque, target_phys_addr_t offset, + uint32_t value) +{ + smc91c111_writeb(opaque, offset, value & 0xff); + smc91c111_writeb(opaque, offset + 1, value >> 8); +} + +static void smc91c111_writel(void *opaque, target_phys_addr_t offset, + uint32_t value) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + /* 32-bit writes to offset 0xc only actually write to the bank select + register (offset 0xe) */ + if (offset != s->base + 0xc) + smc91c111_writew(opaque, offset, value & 0xffff); + smc91c111_writew(opaque, offset + 2, value >> 16); +} + +static uint32_t smc91c111_readw(void *opaque, target_phys_addr_t offset) +{ + uint32_t val; + val = smc91c111_readb(opaque, offset); + val |= smc91c111_readb(opaque, offset + 1) << 8; + return val; +} + +static uint32_t smc91c111_readl(void *opaque, target_phys_addr_t offset) +{ + uint32_t val; + val = smc91c111_readw(opaque, offset); + val |= smc91c111_readw(opaque, offset + 2) << 16; + return val; +} + +static void smc91c111_receive(void *opaque, const uint8_t *buf, int size) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + int status; + int packetsize; + uint32_t crc; + int packetnum; + uint8_t *p; + + if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) + return; + /* Short packets are padded with zeros. Recieveing a packet + < 64 bytes long is considered an error condition. */ + if (size < 64) + packetsize = 64; + else + packetsize = (size & ~1); + packetsize += 6; + crc = (s->rcr & RCR_STRIP_CRC) == 0; + if (crc) + packetsize += 4; + /* TODO: Flag overrun and receive errors. */ + if (packetsize > 2048) + return; + packetnum = smc91c111_allocate_packet(s); + if (packetnum == 0x80) + return; + s->rx_fifo[s->rx_fifo_len++] = packetnum; + + p = &s->data[packetnum][0]; + /* ??? Multicast packets? */ + status = 0; + if (size > 1518) + status |= RS_TOOLONG; + if (size & 1) + status |= RS_ODDFRAME; + *(p++) = status & 0xff; + *(p++) = status >> 8; + *(p++) = packetsize & 0xff; + *(p++) = packetsize >> 8; + memcpy(p, buf, size & ~1); + p += (size & ~1); + /* Pad short packets. */ + if (size < 64) { + int pad; + + if (size & 1) + *(p++) = buf[size - 1]; + pad = 64 - size; + memset(p, 0, pad); + p += pad; + size = 64; + } + /* It's not clear if the CRC should go before or after the last byte in + odd sized packets. Linux disables the CRC, so that's no help. + The pictures in the documentation show the CRC aligned on a 16-bit + boundary before the last odd byte, so that's what we do. */ + if (crc) { + crc = crc32(~0, buf, size); + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; crc >>= 8; + } + if (size & 1) { + *(p++) = buf[size - 1]; + *(p++) = 0x60; + } else { + *(p++) = 0; + *(p++) = 0x40; + } + /* TODO: Raise early RX interrupt? */ + s->int_level |= INT_RCV; + smc91c111_update(s); +} + +static CPUReadMemoryFunc *smc91c111_readfn[] = { + smc91c111_readb, + smc91c111_readw, + smc91c111_readl +}; + +static CPUWriteMemoryFunc *smc91c111_writefn[] = { + smc91c111_writeb, + smc91c111_writew, + smc91c111_writel +}; + +void smc91c111_init(NICInfo *nd, uint32_t base, void *pic, int irq) +{ + smc91c111_state *s; + int iomemtype; + + s = (smc91c111_state *)qemu_mallocz(sizeof(smc91c111_state)); + iomemtype = cpu_register_io_memory(0, smc91c111_readfn, + smc91c111_writefn, s); + cpu_register_physical_memory(base, 16, iomemtype); + s->base = base; + s->pic = pic; + s->irq = irq; + memcpy(s->macaddr, nd->macaddr, 6); + + smc91c111_reset(s); + + s->vc = qemu_new_vlan_client(nd->vlan, smc91c111_receive, s); + /* ??? Save/restore. */ +} @@ -939,6 +939,9 @@ void ps2_write_keyboard(void *, int val); uint32_t ps2_read_data(void *); void ps2_queue(void *, int b); +/* smc91c111.c */ +void smc91c111_init(NICInfo *, uint32_t, void *, int); + #endif /* defined(QEMU_TOOL) */ /* monitor.c */ |