test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

1 files changed, 681 insertions, 0 deletions

diff --git a/tests/qtest/pflash-cfi02-test.c b/tests/qtest/pflash-cfi02-test.c
new file mode 100644
index 0000000000..17aa669b2e
--- /dev/null
+++ b/tests/qtest/pflash-cfi02-test.c
@@ -0,0 +1,681 @@
+/*
+ * QTest testcase for parallel flash with AMD command set
+ *
+ * Copyright (c) 2019 Stephen Checkoway
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+/*
+ * To test the pflash_cfi02 device, we run QEMU with the musicpal machine with
+ * a pflash drive. This enables us to test some flash configurations, but not
+ * all. In particular, we're limited to a 16-bit wide flash device.
+ */
+
+#define MP_FLASH_SIZE_MAX (32 * 1024 * 1024)
+#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX)
+
+#define UNIFORM_FLASH_SIZE (8 * 1024 * 1024)
+#define UNIFORM_FLASH_SECTOR_SIZE (64 * 1024)
+
+/* Use a newtype to keep flash addresses separate from byte addresses. */
+typedef struct {
+    uint64_t addr;
+} faddr;
+#define FLASH_ADDR(x) ((faddr) { .addr = (x) })
+
+#define CFI_ADDR FLASH_ADDR(0x55)
+#define UNLOCK0_ADDR FLASH_ADDR(0x555)
+#define UNLOCK1_ADDR FLASH_ADDR(0x2AA)
+
+#define CFI_CMD 0x98
+#define UNLOCK0_CMD 0xAA
+#define UNLOCK1_CMD 0x55
+#define SECOND_UNLOCK_CMD 0x80
+#define AUTOSELECT_CMD 0x90
+#define RESET_CMD 0xF0
+#define PROGRAM_CMD 0xA0
+#define SECTOR_ERASE_CMD 0x30
+#define CHIP_ERASE_CMD 0x10
+#define UNLOCK_BYPASS_CMD 0x20
+#define UNLOCK_BYPASS_RESET_CMD 0x00
+#define ERASE_SUSPEND_CMD 0xB0
+#define ERASE_RESUME_CMD SECTOR_ERASE_CMD
+
+typedef struct {
+    int bank_width;
+
+    /* Nonuniform block size. */
+    int nb_blocs[4];
+    int sector_len[4];
+
+    QTestState *qtest;
+} FlashConfig;
+
+static char image_path[] = "/tmp/qtest.XXXXXX";
+
+/*
+ * The pflash implementation allows some parameters to be unspecified. We want
+ * to test those configurations but we also need to know the real values in
+ * our testing code. So after we launch qemu, we'll need a new FlashConfig
+ * with the correct values filled in.
+ */
+static FlashConfig expand_config_defaults(const FlashConfig *c)
+{
+    FlashConfig ret = *c;
+
+    if (ret.bank_width == 0) {
+        ret.bank_width = 2;
+    }
+    if (ret.nb_blocs[0] == 0 && ret.sector_len[0] == 0) {
+        ret.sector_len[0] = UNIFORM_FLASH_SECTOR_SIZE;
+        ret.nb_blocs[0] = UNIFORM_FLASH_SIZE / UNIFORM_FLASH_SECTOR_SIZE;
+    }
+
+    /* XXX: Limitations of test harness. */
+    assert(ret.bank_width == 2);
+    return ret;
+}
+
+/*
+ * Return a bit mask suitable for extracting the least significant
+ * status/query response from an interleaved response.
+ */
+static inline uint64_t device_mask(const FlashConfig *c)
+{
+    return (uint64_t)-1;
+}
+
+/*
+ * Return a bit mask exactly as long as the bank_width.
+ */
+static inline uint64_t bank_mask(const FlashConfig *c)
+{
+    if (c->bank_width == 8) {
+        return (uint64_t)-1;
+    }
+    return (1ULL << (c->bank_width * 8)) - 1ULL;
+}
+
+static inline void flash_write(const FlashConfig *c, uint64_t byte_addr,
+                               uint64_t data)
+{
+    /* Sanity check our tests. */
+    assert((data & ~bank_mask(c)) == 0);
+    uint64_t addr = BASE_ADDR + byte_addr;
+    switch (c->bank_width) {
+    case 1:
+        qtest_writeb(c->qtest, addr, data);
+        break;
+    case 2:
+        qtest_writew(c->qtest, addr, data);
+        break;
+    case 4:
+        qtest_writel(c->qtest, addr, data);
+        break;
+    case 8:
+        qtest_writeq(c->qtest, addr, data);
+        break;
+    default:
+        abort();
+    }
+}
+
+static inline uint64_t flash_read(const FlashConfig *c, uint64_t byte_addr)
+{
+    uint64_t addr = BASE_ADDR + byte_addr;
+    switch (c->bank_width) {
+    case 1:
+        return qtest_readb(c->qtest, addr);
+    case 2:
+        return qtest_readw(c->qtest, addr);
+    case 4:
+        return qtest_readl(c->qtest, addr);
+    case 8:
+        return qtest_readq(c->qtest, addr);
+    default:
+        abort();
+    }
+}
+
+/*
+ * Convert a flash address expressed in the maximum width of the device as a
+ * byte address.
+ */
+static inline uint64_t as_byte_addr(const FlashConfig *c, faddr flash_addr)
+{
+    /*
+     * Command addresses are always given as addresses in the maximum
+     * supported bus size for the flash chip. So an x8/x16 chip in x8 mode
+     * uses addresses 0xAAA and 0x555 to unlock because the least significant
+     * bit is ignored. (0x555 rather than 0x554 is traditional.)
+     *
+     * In general we need to multiply by the maximum device width.
+     */
+    return flash_addr.addr * c->bank_width;
+}
+
+/*
+ * Return the command value or expected status replicated across all devices.
+ */
+static inline uint64_t replicate(const FlashConfig *c, uint64_t data)
+{
+    /* Sanity check our tests. */
+    assert((data & ~device_mask(c)) == 0);
+    return data;
+}
+
+static inline void flash_cmd(const FlashConfig *c, faddr cmd_addr,
+                             uint8_t cmd)
+{
+    flash_write(c, as_byte_addr(c, cmd_addr), replicate(c, cmd));
+}
+
+static inline uint64_t flash_query(const FlashConfig *c, faddr query_addr)
+{
+    return flash_read(c, as_byte_addr(c, query_addr));
+}
+
+static inline uint64_t flash_query_1(const FlashConfig *c, faddr query_addr)
+{
+    return flash_query(c, query_addr) & device_mask(c);
+}
+
+static void unlock(const FlashConfig *c)
+{
+    flash_cmd(c, UNLOCK0_ADDR, UNLOCK0_CMD);
+    flash_cmd(c, UNLOCK1_ADDR, UNLOCK1_CMD);
+}
+
+static void reset(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), RESET_CMD);
+}
+
+static void sector_erase(const FlashConfig *c, uint64_t byte_addr)
+{
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    flash_write(c, byte_addr, replicate(c, SECTOR_ERASE_CMD));
+}
+
+static void wait_for_completion(const FlashConfig *c, uint64_t byte_addr)
+{
+    /* If DQ6 is toggling, step the clock and ensure the toggle stops. */
+    const uint64_t dq6 = replicate(c, 0x40);
+    if ((flash_read(c, byte_addr) & dq6) ^ (flash_read(c, byte_addr) & dq6)) {
+        /* Wait for erase or program to finish. */
+        qtest_clock_step_next(c->qtest);
+        /* Ensure that DQ6 has stopped toggling. */
+        g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+    }
+}
+
+static void bypass_program(const FlashConfig *c, uint64_t byte_addr,
+                           uint16_t data)
+{
+    flash_cmd(c, UNLOCK0_ADDR, PROGRAM_CMD);
+    flash_write(c, byte_addr, data);
+    /*
+     * Data isn't valid until DQ6 stops toggling. We don't model this as
+     * writes are immediate, but if this changes in the future, we can wait
+     * until the program is complete.
+     */
+    wait_for_completion(c, byte_addr);
+}
+
+static void program(const FlashConfig *c, uint64_t byte_addr, uint16_t data)
+{
+    unlock(c);
+    bypass_program(c, byte_addr, data);
+}
+
+static void chip_erase(const FlashConfig *c)
+{
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, CHIP_ERASE_CMD);
+}
+
+static void erase_suspend(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), ERASE_SUSPEND_CMD);
+}
+
+static void erase_resume(const FlashConfig *c)
+{
+    flash_cmd(c, FLASH_ADDR(0), ERASE_RESUME_CMD);
+}
+
+/*
+ * Test flash commands with a variety of device geometry.
+ */
+static void test_geometry(const void *opaque)
+{
+    const FlashConfig *config = opaque;
+    QTestState *qtest;
+    qtest = qtest_initf("-M musicpal"
+                        " -drive if=pflash,file=%s,format=raw,copy-on-read"
+                        /* Device geometry properties. */
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks0,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length0,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks1,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length1,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks2,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length2,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=num-blocks3,value=%d"
+                        " -global driver=cfi.pflash02,"
+                        "property=sector-length3,value=%d",
+                        image_path,
+                        config->nb_blocs[0],
+                        config->sector_len[0],
+                        config->nb_blocs[1],
+                        config->sector_len[1],
+                        config->nb_blocs[2],
+                        config->sector_len[2],
+                        config->nb_blocs[3],
+                        config->sector_len[3]);
+    FlashConfig explicit_config = expand_config_defaults(config);
+    explicit_config.qtest = qtest;
+    const FlashConfig *c = &explicit_config;
+
+    /* Check the IDs. */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+    if (c->bank_width >= 2) {
+        /*
+         * XXX: The ID returned by the musicpal flash chip is 16 bits which
+         * wouldn't happen with an 8-bit device. It would probably be best to
+         * prohibit addresses larger than the device width in pflash_cfi02.c,
+         * but then we couldn't test smaller device widths at all.
+         */
+        g_assert_cmphex(flash_query(c, FLASH_ADDR(1)), ==,
+                        replicate(c, 0x236D));
+    }
+    reset(c);
+
+    /* Check the erase blocks. */
+    flash_cmd(c, CFI_ADDR, CFI_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
+
+    /* Num erase regions. */
+    int nb_erase_regions = flash_query_1(c, FLASH_ADDR(0x2C));
+    g_assert_cmphex(nb_erase_regions, ==,
+                    !!c->nb_blocs[0] + !!c->nb_blocs[1] + !!c->nb_blocs[2] +
+                    !!c->nb_blocs[3]);
+
+    /* Check device length. */
+    uint32_t device_len = 1 << flash_query_1(c, FLASH_ADDR(0x27));
+    g_assert_cmphex(device_len, ==, UNIFORM_FLASH_SIZE);
+
+    /* Check that erase suspend to read/write is supported. */
+    uint16_t pri = flash_query_1(c, FLASH_ADDR(0x15)) +
+                   (flash_query_1(c, FLASH_ADDR(0x16)) << 8);
+    g_assert_cmpint(pri, >=, 0x2D + 4 * nb_erase_regions);
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 0)), ==, replicate(c, 'P'));
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 1)), ==, replicate(c, 'R'));
+    g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 2)), ==, replicate(c, 'I'));
+    g_assert_cmpint(flash_query_1(c, FLASH_ADDR(pri + 6)), ==, 2); /* R/W */
+    reset(c);
+
+    const uint64_t dq7 = replicate(c, 0x80);
+    const uint64_t dq6 = replicate(c, 0x40);
+    const uint64_t dq3 = replicate(c, 0x08);
+    const uint64_t dq2 = replicate(c, 0x04);
+
+    uint64_t byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        uint64_t base = 0x2D + 4 * region;
+        flash_cmd(c, CFI_ADDR, CFI_CMD);
+        uint32_t nb_sectors = flash_query_1(c, FLASH_ADDR(base + 0)) +
+                              (flash_query_1(c, FLASH_ADDR(base + 1)) << 8) + 1;
+        uint32_t sector_len = (flash_query_1(c, FLASH_ADDR(base + 2)) << 8) +
+                              (flash_query_1(c, FLASH_ADDR(base + 3)) << 16);
+        g_assert_cmphex(nb_sectors, ==, c->nb_blocs[region]);
+        g_assert_cmphex(sector_len, ==, c->sector_len[region]);
+        reset(c);
+
+        /* Erase and program sector. */
+        for (uint32_t i = 0; i < nb_sectors; ++i) {
+            sector_erase(c, byte_addr);
+
+            /* Check that DQ3 is 0. */
+            g_assert_cmphex(flash_read(c, byte_addr) & dq3, ==, 0);
+            qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
+
+            /* Check that DQ3 is 1. */
+            uint64_t status0 = flash_read(c, byte_addr);
+            g_assert_cmphex(status0 & dq3, ==, dq3);
+
+            /* DQ7 is 0 during an erase. */
+            g_assert_cmphex(status0 & dq7, ==, 0);
+            uint64_t status1 = flash_read(c, byte_addr);
+
+            /* DQ6 toggles during an erase. */
+            g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
+
+            /* Wait for erase to complete. */
+            wait_for_completion(c, byte_addr);
+
+            /* Ensure DQ6 has stopped toggling. */
+            g_assert_cmphex(flash_read(c, byte_addr), ==,
+                            flash_read(c, byte_addr));
+
+            /* Now the data should be valid. */
+            g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+
+            /* Program a bit pattern. */
+            program(c, byte_addr, 0x55);
+            g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55);
+            program(c, byte_addr, 0xA5);
+            g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05);
+            byte_addr += sector_len;
+        }
+    }
+
+    /* Erase the chip. */
+    chip_erase(c);
+    /* Read toggle. */
+    uint64_t status0 = flash_read(c, 0);
+    /* DQ7 is 0 during an erase. */
+    g_assert_cmphex(status0 & dq7, ==, 0);
+    uint64_t status1 = flash_read(c, 0);
+    /* DQ6 toggles during an erase. */
+    g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
+    /* Wait for erase to complete. */
+    qtest_clock_step_next(c->qtest);
+    /* Ensure DQ6 has stopped toggling. */
+    g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));
+    /* Now the data should be valid. */
+
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (uint32_t i = 0; i < c->nb_blocs[region]; ++i) {
+            uint64_t byte_addr = i * c->sector_len[region];
+            g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+        }
+    }
+
+    /* Unlock bypass */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, UNLOCK_BYPASS_CMD);
+    bypass_program(c, 0 * c->bank_width, 0x01);
+    bypass_program(c, 1 * c->bank_width, 0x23);
+    bypass_program(c, 2 * c->bank_width, 0x45);
+    /*
+     * Test that bypass programming, unlike normal programming can use any
+     * address for the PROGRAM_CMD.
+     */
+    flash_cmd(c, FLASH_ADDR(3 * c->bank_width), PROGRAM_CMD);
+    flash_write(c, 3 * c->bank_width, 0x67);
+    wait_for_completion(c, 3 * c->bank_width);
+    flash_cmd(c, FLASH_ADDR(0), UNLOCK_BYPASS_RESET_CMD);
+    bypass_program(c, 4 * c->bank_width, 0x89); /* Should fail. */
+    g_assert_cmphex(flash_read(c, 0 * c->bank_width), ==, 0x01);
+    g_assert_cmphex(flash_read(c, 1 * c->bank_width), ==, 0x23);
+    g_assert_cmphex(flash_read(c, 2 * c->bank_width), ==, 0x45);
+    g_assert_cmphex(flash_read(c, 3 * c->bank_width), ==, 0x67);
+    g_assert_cmphex(flash_read(c, 4 * c->bank_width), ==, bank_mask(c));
+
+    /* Test ignored high order bits of address. */
+    flash_cmd(c, FLASH_ADDR(0x5555), UNLOCK0_CMD);
+    flash_cmd(c, FLASH_ADDR(0x2AAA), UNLOCK1_CMD);
+    flash_cmd(c, FLASH_ADDR(0x5555), AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+    reset(c);
+
+    /*
+     * Program a word on each sector, erase one or two sectors per region, and
+     * verify that all of those, and only those, are erased.
+     */
+    byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (int i = 0; i < config->nb_blocs[region]; ++i) {
+            program(c, byte_addr, 0);
+            byte_addr += config->sector_len[region];
+        }
+    }
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
+    unlock(c);
+    byte_addr = 0;
+    const uint64_t erase_cmd = replicate(c, SECTOR_ERASE_CMD);
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        flash_write(c, byte_addr, erase_cmd);
+        if (c->nb_blocs[region] > 1) {
+            flash_write(c, byte_addr + c->sector_len[region], erase_cmd);
+        }
+        byte_addr += c->sector_len[region] * c->nb_blocs[region];
+    }
+
+    qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
+    wait_for_completion(c, 0);
+    byte_addr = 0;
+    for (int region = 0; region < nb_erase_regions; ++region) {
+        for (int i = 0; i < config->nb_blocs[region]; ++i) {
+            if (i < 2) {
+                g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
+            } else {
+                g_assert_cmphex(flash_read(c, byte_addr), ==, 0);
+            }
+            byte_addr += config->sector_len[region];
+        }
+    }
+
+    /* Test erase suspend/resume during erase timeout. */
+    sector_erase(c, 0);
+    /*
+     * Check that DQ 3 is 0 and DQ6 and DQ2 are toggling in the sector being
+     * erased as well as in a sector not being erased.
+     */
+    byte_addr = c->sector_len[0];
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, 0);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, 0);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+
+    /*
+     * Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
+     * an erase suspended sector but that neither toggle (we should be
+     * getting data) in a sector not being erased.
+     */
+    erase_suspend(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+
+    /* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
+    erase_resume(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    wait_for_completion(c, 0);
+
+    /* Repeat this process but this time suspend after the timeout. */
+    sector_erase(c, 0);
+    qtest_clock_step_next(c->qtest);
+    /*
+     * Check that DQ 3 is 1 and DQ6 and DQ2 are toggling in the sector being
+     * erased as well as in a sector not being erased.
+     */
+    byte_addr = c->sector_len[0];
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+
+    /*
+     * Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
+     * an erase suspended sector but that neither toggle (we should be
+     * getting data) in a sector not being erased.
+     */
+    erase_suspend(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
+
+    /* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
+    erase_resume(c);
+    status0 = flash_read(c, 0);
+    status1 = flash_read(c, 0);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    status0 = flash_read(c, byte_addr);
+    status1 = flash_read(c, byte_addr);
+    g_assert_cmpint(status0 & dq3, ==, dq3);
+    g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
+    g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
+    wait_for_completion(c, 0);
+
+    qtest_quit(qtest);
+}
+
+/*
+ * Test that
+ * 1. enter autoselect mode;
+ * 2. enter CFI mode; and then
+ * 3. exit CFI mode
+ * leaves the flash device in autoselect mode.
+ */
+static void test_cfi_in_autoselect(const void *opaque)
+{
+    const FlashConfig *config = opaque;
+    QTestState *qtest;
+    qtest = qtest_initf("-M musicpal"
+                        " -drive if=pflash,file=%s,format=raw,copy-on-read",
+                        image_path);
+    FlashConfig explicit_config = expand_config_defaults(config);
+    explicit_config.qtest = qtest;
+    const FlashConfig *c = &explicit_config;
+
+    /* 1. Enter autoselect. */
+    unlock(c);
+    flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+
+    /* 2. Enter CFI. */
+    flash_cmd(c, CFI_ADDR, CFI_CMD);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
+
+    /* 3. Exit CFI. */
+    reset(c);
+    g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
+
+    qtest_quit(qtest);
+}
+
+static void cleanup(void *opaque)
+{
+    unlink(image_path);
+}
+
+/*
+ * XXX: Tests are limited to bank_width = 2 for now because that's what
+ * hw/arm/musicpal.c has.
+ */
+static const FlashConfig configuration[] = {
+    /* One x16 device. */
+    {
+        .bank_width = 2,
+    },
+    /* Nonuniform sectors (top boot). */
+    {
+        .bank_width = 2,
+        .nb_blocs = { 127, 1, 2, 1 },
+        .sector_len = { 0x10000, 0x08000, 0x02000, 0x04000 },
+    },
+    /* Nonuniform sectors (bottom boot). */
+    {
+        .bank_width = 2,
+        .nb_blocs = { 1, 2, 1, 127 },
+        .sector_len = { 0x04000, 0x02000, 0x08000, 0x10000 },
+    },
+};
+
+int main(int argc, char **argv)
+{
+    int fd = mkstemp(image_path);
+    if (fd == -1) {
+        g_printerr("Failed to create temporary file %s: %s\n", image_path,
+                   strerror(errno));
+        exit(EXIT_FAILURE);
+    }
+    if (ftruncate(fd, UNIFORM_FLASH_SIZE) < 0) {
+        int error_code = errno;
+        close(fd);
+        unlink(image_path);
+        g_printerr("Failed to truncate file %s to %u MB: %s\n", image_path,
+                   UNIFORM_FLASH_SIZE, strerror(error_code));
+        exit(EXIT_FAILURE);
+    }
+    close(fd);
+
+    qtest_add_abrt_handler(cleanup, NULL);
+    g_test_init(&argc, &argv, NULL);
+
+    size_t nb_configurations = sizeof configuration / sizeof configuration[0];
+    for (size_t i = 0; i < nb_configurations; ++i) {
+        const FlashConfig *config = &configuration[i];
+        char *path = g_strdup_printf("pflash-cfi02"
+                                     "/geometry/%dx%x-%dx%x-%dx%x-%dx%x"
+                                     "/%d",
+                                     config->nb_blocs[0],
+                                     config->sector_len[0],
+                                     config->nb_blocs[1],
+                                     config->sector_len[1],
+                                     config->nb_blocs[2],
+                                     config->sector_len[2],
+                                     config->nb_blocs[3],
+                                     config->sector_len[3],
+                                     config->bank_width);
+        qtest_add_data_func(path, config, test_geometry);
+        g_free(path);
+    }
+
+    qtest_add_data_func("pflash-cfi02/cfi-in-autoselect", &configuration[0],
+                        test_cfi_in_autoselect);
+    int result = g_test_run();
+    cleanup(NULL);
+    return result;
+}