ECC updated based on information released recently by Sun (Robert Reif)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4366 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 160 insertions, 80 deletions

diff --git a/hw/eccmemctl.c b/hw/eccmemctl.c
index 02b2f8de35..772c1c2211 100644
--- a/hw/eccmemctl.c
+++ b/hw/eccmemctl.c
@@ -41,57 +41,87 @@
  */
 
 /* Register offsets */
-#define ECC_FCR_REG    0
-#define ECC_FSR_REG    8
-#define ECC_FAR0_REG   16
-#define ECC_FAR1_REG   20
-#define ECC_DIAG_REG   24
+#define ECC_MER        0                /* Memory Enable Register */
+#define ECC_MDR        4                /* Memory Delay Register */
+#define ECC_MFSR       8                /* Memory Fault Status Register */
+#define ECC_VCR        12               /* Video Configuration Register */
+#define ECC_MFAR0      16               /* Memory Fault Address Register 0 */
+#define ECC_MFAR1      20               /* Memory Fault Address Register 1 */
+#define ECC_DR         24               /* Diagnostic Register */
+#define ECC_ECR0       28               /* Event Count Register 0 */
+#define ECC_ECR1       32               /* Event Count Register 1 */
 
 /* ECC fault control register */
-#define ECC_FCR_EE     0x00000001      /* Enable ECC checking */
-#define ECC_FCR_EI     0x00000010      /* Enable Interrupts on correctable errors */
-#define ECC_FCR_VER    0x0f000000      /* Version */
-#define ECC_FCR_IMPL   0xf0000000      /* Implementation */
+#define ECC_MER_EE     0x00000001      /* Enable ECC checking */
+#define ECC_MER_EI     0x00000002      /* Enable Interrupts on correctable errors */
+#define ECC_MER_MRR0   0x00000004      /* SIMM 0 */
+#define ECC_MER_MRR1   0x00000008      /* SIMM 1 */
+#define ECC_MER_MRR2   0x00000010      /* SIMM 2 */
+#define ECC_MER_MRR3   0x00000020      /* SIMM 3 */
+#define ECC_MER_MRR4   0x00000040      /* SIMM 4 */
+#define ECC_MER_MRR5   0x00000080      /* SIMM 5 */
+#define ECC_MER_MRR6   0x00000100      /* SIMM 6 */
+#define ECC_MER_MRR7   0x00000200      /* SIMM 7 */
+#define ECC_MER_REU    0x00000200      /* Memory Refresh Enable (600MP) */
+#define ECC_MER_MRR    0x000003fc      /* MRR mask */
+#define ECC_MEM_A      0x00000400      /* Memory controller addr map select */
+#define ECC_MER_DCI    0x00000800      /* Dsiables Coherent Invalidate ACK */
+#define ECC_MER_VER    0x0f000000      /* Version */
+#define ECC_MER_IMPL   0xf0000000      /* Implementation */
+
+/* ECC memory delay register */
+#define ECC_MDR_RRI    0x000003ff      /* Refresh Request Interval */
+#define ECC_MDR_MI     0x00001c00      /* MIH Delay */
+#define ECC_MDR_CI     0x0000e000      /* Coherent Invalidate Delay */
+#define ECC_MDR_MDL    0x001f0000      /* MBus Master arbitration delay */
+#define ECC_MDR_MDH    0x03e00000      /* MBus Master arbitration delay */
+#define ECC_MDR_GAD    0x7c000000      /* Graphics Arbitration Delay */
+#define ECC_MDR_RSC    0x80000000      /* Refresh load control */
+#define ECC_MDR_MASK   0x7fffffff
 
 /* ECC fault status register */
-#define ECC_FSR_CE     0x00000001      /* Correctable error */
-#define ECC_FSR_BS     0x00000002      /* C2 graphics bad slot access */
-#define ECC_FSR_TO     0x00000004      /* Timeout on write */
-#define ECC_FSR_UE     0x00000008      /* Uncorrectable error */
-#define ECC_FSR_DW     0x000000f0      /* Index of double word in block */
-#define ECC_FSR_SYND   0x0000ff00      /* Syndrome for correctable error */
-#define ECC_FSR_ME     0x00010000      /* Multiple errors */
-#define ECC_FSR_C2ERR  0x00020000      /* C2 graphics error */
+#define ECC_MFSR_CE    0x00000001      /* Correctable error */
+#define ECC_MFSR_BS    0x00000002      /* C2 graphics bad slot access */
+#define ECC_MFSR_TO    0x00000004      /* Timeout on write */
+#define ECC_MFSR_UE    0x00000008      /* Uncorrectable error */
+#define ECC_MFSR_DW    0x000000f0      /* Index of double word in block */
+#define ECC_MFSR_SYND  0x0000ff00      /* Syndrome for correctable error */
+#define ECC_MFSR_ME    0x00010000      /* Multiple errors */
+#define ECC_MFSR_C2ERR 0x00020000      /* C2 graphics error */
 
 /* ECC fault address register 0 */
-#define ECC_FAR0_PADDR 0x0000000f      /* PA[32-35] */
-#define ECC_FAR0_TYPE  0x000000f0      /* Transaction type */
-#define ECC_FAR0_SIZE  0x00000700      /* Transaction size */
-#define ECC_FAR0_CACHE 0x00000800      /* Mapped cacheable */
-#define ECC_FAR0_LOCK  0x00001000      /* Error occurred in atomic cycle */
-#define ECC_FAR0_BMODE 0x00002000      /* Boot mode */
-#define ECC_FAR0_VADDR 0x003fc000      /* VA[12-19] (superset bits) */
-#define ECC_FAR0_S     0x08000000      /* Supervisor mode */
-#define ECC_FARO_MID   0xf0000000      /* Module ID */
+#define ECC_MFAR0_PADDR 0x0000000f     /* PA[32-35] */
+#define ECC_MFAR0_TYPE  0x000000f0     /* Transaction type */
+#define ECC_MFAR0_SIZE  0x00000700     /* Transaction size */
+#define ECC_MFAR0_CACHE 0x00000800     /* Mapped cacheable */
+#define ECC_MFAR0_LOCK  0x00001000     /* Error occurred in atomic cycle */
+#define ECC_MFAR0_BMODE 0x00002000     /* Boot mode */
+#define ECC_MFAR0_VADDR 0x003fc000     /* VA[12-19] (superset bits) */
+#define ECC_MFAR0_S     0x08000000     /* Supervisor mode */
+#define ECC_MFARO_MID   0xf0000000     /* Module ID */
 
 /* ECC diagnostic register */
-#define ECC_DIAG_CBX   0x00000001
-#define ECC_DIAG_CB0   0x00000002
-#define ECC_DIAG_CB1   0x00000004
-#define ECC_DIAG_CB2   0x00000008
-#define ECC_DIAG_CB4   0x00000010
-#define ECC_DIAG_CB8   0x00000020
-#define ECC_DIAG_CB16  0x00000040
-#define ECC_DIAG_CB32  0x00000080
-#define ECC_DIAG_DMODE 0x00000c00
-
-#define ECC_NREGS      8
+#define ECC_DR_CBX     0x00000001
+#define ECC_DR_CB0     0x00000002
+#define ECC_DR_CB1     0x00000004
+#define ECC_DR_CB2     0x00000008
+#define ECC_DR_CB4     0x00000010
+#define ECC_DR_CB8     0x00000020
+#define ECC_DR_CB16    0x00000040
+#define ECC_DR_CB32    0x00000080
+#define ECC_DR_DMODE   0x00000c00
+
+#define ECC_NREGS      9
 #define ECC_SIZE       (ECC_NREGS * sizeof(uint32_t))
-#define ECC_ADDR_MASK  (ECC_SIZE - 1)
+#define ECC_ADDR_MASK  0x1f
+
+#define ECC_DIAG_SIZE  4
+#define ECC_DIAG_MASK  (ECC_DIAG_SIZE - 1)
 
 typedef struct ECCState {
     qemu_irq irq;
     uint32_t regs[ECC_NREGS];
+    uint8_t diag[ECC_DIAG_SIZE];
 } ECCState;
 
 static void ecc_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
@@ -99,38 +129,34 @@ static void ecc_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
     ECCState *s = opaque;
 
     switch (addr & ECC_ADDR_MASK) {
-    case ECC_FCR_REG:
-        s->regs[0] = (s->regs[0] & (ECC_FCR_VER | ECC_FCR_IMPL)) |
-                     (val & ~(ECC_FCR_VER | ECC_FCR_IMPL));
-        DPRINTF("Write fault control %08x\n", val);
+    case ECC_MER:
+        s->regs[0] = (s->regs[0] & (ECC_MER_VER | ECC_MER_IMPL)) |
+                     (val & ~(ECC_MER_VER | ECC_MER_IMPL));
+        DPRINTF("Write memory enable %08x\n", val);
         break;
-    case 4:
-        s->regs[1] =  val;
-        DPRINTF("Write reg[1] %08x\n", val);
+    case ECC_MDR:
+        s->regs[1] =  val & ECC_MDR_MASK;
+        DPRINTF("Write memory delay %08x\n", val);
         break;
-    case ECC_FSR_REG:
+    case ECC_MFSR:
         s->regs[2] =  val;
-        DPRINTF("Write fault status %08x\n", val);
+        DPRINTF("Write memory fault status %08x\n", val);
         break;
-    case 12:
+    case ECC_VCR:
         s->regs[3] =  val;
-        DPRINTF("Write reg[3] %08x\n", val);
-        break;
-    case ECC_FAR0_REG:
-        s->regs[4] =  val;
-        DPRINTF("Write fault address 0 %08x\n", val);
+        DPRINTF("Write slot configuration %08x\n", val);
         break;
-    case ECC_FAR1_REG:
-        s->regs[5] =  val;
-        DPRINTF("Write fault address 1 %08x\n", val);
-        break;
-    case ECC_DIAG_REG:
+    case ECC_DR:
         s->regs[6] =  val;
-        DPRINTF("Write diag %08x\n", val);
+        DPRINTF("Write diagnosiic %08x\n", val);
+        break;
+    case ECC_ECR0:
+        s->regs[7] =  val;
+        DPRINTF("Write event count 1 %08x\n", val);
         break;
-    case 28:
+    case ECC_ECR1:
         s->regs[7] =  val;
-        DPRINTF("Write reg[7] %08x\n", val);
+        DPRINTF("Write event count 2 %08x\n", val);
         break;
     }
 }
@@ -141,37 +167,41 @@ static uint32_t ecc_mem_readl(void *opaque, target_phys_addr_t addr)
     uint32_t ret = 0;
 
     switch (addr & ECC_ADDR_MASK) {
-    case ECC_FCR_REG:
+    case ECC_MER:
         ret = s->regs[0];
-        DPRINTF("Read enable %08x\n", ret);
+        DPRINTF("Read memory enable %08x\n", ret);
         break;
-    case 4:
+    case ECC_MDR:
         ret = s->regs[1];
-        DPRINTF("Read register[1] %08x\n", ret);
+        DPRINTF("Read memory delay %08x\n", ret);
         break;
-    case ECC_FSR_REG:
+    case ECC_MFSR:
         ret = s->regs[2];
-        DPRINTF("Read fault status %08x\n", ret);
+        DPRINTF("Read memory fault status %08x\n", ret);
         break;
-    case 12:
+    case ECC_VCR:
         ret = s->regs[3];
-        DPRINTF("Read reg[3] %08x\n", ret);
+        DPRINTF("Read slot configuration %08x\n", ret);
         break;
-    case ECC_FAR0_REG:
+    case ECC_MFAR0:
         ret = s->regs[4];
-        DPRINTF("Read fault address 0 %08x\n", ret);
+        DPRINTF("Read memory fault address 0 %08x\n", ret);
         break;
-    case ECC_FAR1_REG:
+    case ECC_MFAR1:
         ret = s->regs[5];
-        DPRINTF("Read fault address 1 %08x\n", ret);
+        DPRINTF("Read memory fault address 1 %08x\n", ret);
         break;
-    case ECC_DIAG_REG:
+    case ECC_DR:
         ret = s->regs[6];
-        DPRINTF("Read diag %08x\n", ret);
+        DPRINTF("Read diagnostic %08x\n", ret);
         break;
-    case 28:
+    case ECC_ECR0:
         ret = s->regs[7];
-        DPRINTF("Read reg[7] %08x\n", ret);
+        DPRINTF("Read event count 1 %08x\n", ret);
+        break;
+    case ECC_ECR1:
+        ret = s->regs[7];
+        DPRINTF("Read event count 2 %08x\n", ret);
         break;
     }
     return ret;
@@ -189,17 +219,49 @@ static CPUWriteMemoryFunc *ecc_mem_write[3] = {
     ecc_mem_writel,
 };
 
+static void ecc_diag_mem_writeb(void *opaque, target_phys_addr_t addr,
+                                uint32_t val)
+{
+    ECCState *s = opaque;
+
+    DPRINTF("Write diagnostic[%d] = %02x\n", (int)(addr & ECC_DIAG_MASK), val);
+    s->diag[addr & ECC_DIAG_MASK] = val;
+}
+
+static uint32_t ecc_diag_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+    ECCState *s = opaque;
+    uint32_t ret = s->diag[addr & ECC_DIAG_MASK];
+    DPRINTF("Read diagnostic[%d] = %02x\n", (int)(addr & ECC_DIAG_MASK), ret);
+    return ret;
+}
+
+static CPUReadMemoryFunc *ecc_diag_mem_read[3] = {
+    ecc_diag_mem_readb,
+    NULL,
+    NULL,
+};
+
+static CPUWriteMemoryFunc *ecc_diag_mem_write[3] = {
+    ecc_diag_mem_writeb,
+    NULL,
+    NULL,
+};
+
 static int ecc_load(QEMUFile *f, void *opaque, int version_id)
 {
     ECCState *s = opaque;
     int i;
 
-    if (version_id != 1)
+    if (version_id != 2)
         return -EINVAL;
 
     for (i = 0; i < ECC_NREGS; i++)
         qemu_get_be32s(f, &s->regs[i]);
 
+    for (i = 0; i < ECC_DIAG_SIZE; i++)
+        qemu_get_8s(f, &s->diag[i]);
+
     return 0;
 }
 
@@ -210,6 +272,9 @@ static void ecc_save(QEMUFile *f, void *opaque)
 
     for (i = 0; i < ECC_NREGS; i++)
         qemu_put_be32s(f, &s->regs[i]);
+
+    for (i = 0; i < ECC_DIAG_SIZE; i++)
+        qemu_put_8s(f, &s->diag[i]);
 }
 
 static void ecc_reset(void *opaque)
@@ -217,7 +282,16 @@ static void ecc_reset(void *opaque)
     ECCState *s = opaque;
     int i;
 
-    s->regs[ECC_FCR_REG] &= (ECC_FCR_VER | ECC_FCR_IMPL);
+    s->regs[ECC_MER] &= (ECC_MER_VER | ECC_MER_IMPL);
+    s->regs[ECC_MER] |= ECC_MER_MRR;
+    s->regs[ECC_MDR] = 0x20;
+    s->regs[ECC_MFSR] = 0;
+    s->regs[ECC_VCR] = 0;
+    s->regs[ECC_MFAR0] = 0x07c00000;
+    s->regs[ECC_MFAR1] = 0;
+    s->regs[ECC_DR] = 0;
+    s->regs[ECC_ECR0] = 0;
+    s->regs[ECC_ECR1] = 0;
 
     for (i = 1; i < ECC_NREGS; i++)
         s->regs[i] = 0;
@@ -237,7 +311,13 @@ void * ecc_init(target_phys_addr_t base, qemu_irq irq, uint32_t version)
 
     ecc_io_memory = cpu_register_io_memory(0, ecc_mem_read, ecc_mem_write, s);
     cpu_register_physical_memory(base, ECC_SIZE, ecc_io_memory);
-    register_savevm("ECC", base, 1, ecc_save, ecc_load, s);
+    if (version == 0) { // SS-600MP only
+        ecc_io_memory = cpu_register_io_memory(0, ecc_diag_mem_read,
+                                               ecc_diag_mem_write, s);
+        cpu_register_physical_memory(base + 0x1000, ECC_DIAG_SIZE,
+                                     ecc_io_memory);
+    }
+    register_savevm("ECC", base, 2, ecc_save, ecc_load, s);
     qemu_register_reset(ecc_reset, s);
     ecc_reset(s);
     return s;