hw/misc/tz-mpc.c: Implement registers

Implement the missing registers for the TZ MPC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20180620132032.28865-3-peter.maydell@linaro.org

1 files changed, 137 insertions, 3 deletions

diff --git a/hw/misc/tz-mpc.c b/hw/misc/tz-mpc.c
index 8a8617bdbd..e5b91bf81a 100644
--- a/hw/misc/tz-mpc.c
+++ b/hw/misc/tz-mpc.c
@@ -28,16 +28,23 @@ enum {
 
 /* Config registers */
 REG32(CTRL, 0x00)
+    FIELD(CTRL, SEC_RESP, 4, 1)
+    FIELD(CTRL, AUTOINC, 8, 1)
+    FIELD(CTRL, LOCKDOWN, 31, 1)
 REG32(BLK_MAX, 0x10)
 REG32(BLK_CFG, 0x14)
 REG32(BLK_IDX, 0x18)
 REG32(BLK_LUT, 0x1c)
 REG32(INT_STAT, 0x20)
+    FIELD(INT_STAT, IRQ, 0, 1)
 REG32(INT_CLEAR, 0x24)
+    FIELD(INT_CLEAR, IRQ, 0, 1)
 REG32(INT_EN, 0x28)
+    FIELD(INT_EN, IRQ, 0, 1)
 REG32(INT_INFO1, 0x2c)
 REG32(INT_INFO2, 0x30)
 REG32(INT_SET, 0x34)
+    FIELD(INT_SET, IRQ, 0, 1)
 REG32(PIDR4, 0xfd0)
 REG32(PIDR5, 0xfd4)
 REG32(PIDR6, 0xfd8)
@@ -57,10 +64,25 @@ static const uint8_t tz_mpc_idregs[] = {
     0x0d, 0xf0, 0x05, 0xb1,
 };
 
+static void tz_mpc_irq_update(TZMPC *s)
+{
+    qemu_set_irq(s->irq, s->int_stat && s->int_en);
+}
+
+static void tz_mpc_autoinc_idx(TZMPC *s, unsigned access_size)
+{
+    /* Auto-increment BLK_IDX if necessary */
+    if (access_size == 4 && (s->ctrl & R_CTRL_AUTOINC_MASK)) {
+        s->blk_idx++;
+        s->blk_idx %= s->blk_max;
+    }
+}
+
 static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
                                    uint64_t *pdata,
                                    unsigned size, MemTxAttrs attrs)
 {
+    TZMPC *s = TZ_MPC(opaque);
     uint64_t r;
     uint32_t offset = addr & ~0x3;
 
@@ -74,6 +96,38 @@ static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
     }
 
     switch (offset) {
+    case A_CTRL:
+        r = s->ctrl;
+        break;
+    case A_BLK_MAX:
+        r = s->blk_max;
+        break;
+    case A_BLK_CFG:
+        /* We are never in "init in progress state", so this just indicates
+         * the block size. s->blocksize == (1 << BLK_CFG + 5), so
+         * BLK_CFG == ctz32(s->blocksize) - 5
+         */
+        r = ctz32(s->blocksize) - 5;
+        break;
+    case A_BLK_IDX:
+        r = s->blk_idx;
+        break;
+    case A_BLK_LUT:
+        r = s->blk_lut[s->blk_idx];
+        tz_mpc_autoinc_idx(s, size);
+        break;
+    case A_INT_STAT:
+        r = s->int_stat;
+        break;
+    case A_INT_EN:
+        r = s->int_en;
+        break;
+    case A_INT_INFO1:
+        r = s->int_info1;
+        break;
+    case A_INT_INFO2:
+        r = s->int_info2;
+        break;
     case A_PIDR4:
     case A_PIDR5:
     case A_PIDR6:
@@ -120,6 +174,7 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
                                     uint64_t value,
                                     unsigned size, MemTxAttrs attrs)
 {
+    TZMPC *s = TZ_MPC(opaque);
     uint32_t offset = addr & ~0x3;
 
     trace_tz_mpc_reg_write(addr, value, size);
@@ -140,9 +195,15 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
         uint32_t oldval;
 
         switch (offset) {
-            /* As we add support for registers which need expansions
-             * other than zeroes we'll fill in cases here.
-             */
+        case A_CTRL:
+            oldval = s->ctrl;
+            break;
+        case A_BLK_IDX:
+            oldval = s->blk_idx;
+            break;
+        case A_BLK_LUT:
+            oldval = s->blk_lut[s->blk_idx];
+            break;
         default:
             oldval = 0;
             break;
@@ -150,7 +211,48 @@ static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
         value = deposit32(oldval, (addr & 3) * 8, size * 8, value);
     }
 
+    if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) &&
+        (offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) {
+        /* Lockdown mode makes these three registers read-only, and
+         * the only way out of it is to reset the device.
+         */
+        qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x "
+                      "while MPC is in lockdown mode\n", offset);
+        return MEMTX_OK;
+    }
+
     switch (offset) {
+    case A_CTRL:
+        /* We don't implement the 'data gating' feature so all other bits
+         * are reserved and we make them RAZ/WI.
+         */
+        s->ctrl = value & (R_CTRL_SEC_RESP_MASK |
+                           R_CTRL_AUTOINC_MASK |
+                           R_CTRL_LOCKDOWN_MASK);
+        break;
+    case A_BLK_IDX:
+        s->blk_idx = value % s->blk_max;
+        break;
+    case A_BLK_LUT:
+        s->blk_lut[s->blk_idx] = value;
+        tz_mpc_autoinc_idx(s, size);
+        break;
+    case A_INT_CLEAR:
+        if (value & R_INT_CLEAR_IRQ_MASK) {
+            s->int_stat = 0;
+            tz_mpc_irq_update(s);
+        }
+        break;
+    case A_INT_EN:
+        s->int_en = value & R_INT_EN_IRQ_MASK;
+        tz_mpc_irq_update(s);
+        break;
+    case A_INT_SET:
+        if (value & R_INT_SET_IRQ_MASK) {
+            s->int_stat = R_INT_STAT_IRQ_MASK;
+            tz_mpc_irq_update(s);
+        }
+        break;
     case A_PIDR4:
     case A_PIDR5:
     case A_PIDR6:
@@ -266,6 +368,16 @@ static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu)
 
 static void tz_mpc_reset(DeviceState *dev)
 {
+    TZMPC *s = TZ_MPC(dev);
+
+    s->ctrl = 0x00000100;
+    s->blk_idx = 0;
+    s->int_stat = 0;
+    s->int_en = 1;
+    s->int_info1 = 0;
+    s->int_info2 = 0;
+
+    memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t));
 }
 
 static void tz_mpc_init(Object *obj)
@@ -339,13 +451,35 @@ static void tz_mpc_realize(DeviceState *dev, Error **errp)
                        "tz-mpc-downstream");
     address_space_init(&s->blocked_io_as, &s->blocked_io,
                        "tz-mpc-blocked-io");
+
+    s->blk_lut = g_new(uint32_t, s->blk_max);
+}
+
+static int tz_mpc_post_load(void *opaque, int version_id)
+{
+    TZMPC *s = TZ_MPC(opaque);
+
+    /* Check the incoming data doesn't point blk_idx off the end of blk_lut. */
+    if (s->blk_idx >= s->blk_max) {
+        return -1;
+    }
+    return 0;
 }
 
 static const VMStateDescription tz_mpc_vmstate = {
     .name = "tz-mpc",
     .version_id = 1,
     .minimum_version_id = 1,
+    .post_load = tz_mpc_post_load,
     .fields = (VMStateField[]) {
+        VMSTATE_UINT32(ctrl, TZMPC),
+        VMSTATE_UINT32(blk_idx, TZMPC),
+        VMSTATE_UINT32(int_stat, TZMPC),
+        VMSTATE_UINT32(int_en, TZMPC),
+        VMSTATE_UINT32(int_info1, TZMPC),
+        VMSTATE_UINT32(int_info2, TZMPC),
+        VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max,
+                              0, vmstate_info_uint32, uint32_t),
         VMSTATE_END_OF_LIST()
     }
 };