hw: move I2C controllers to hw/i2c/, configure via default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 492 insertions, 0 deletions

diff --git a/hw/i2c/omap_i2c.c b/hw/i2c/omap_i2c.c
new file mode 100644
index 0000000000..efb2254aea
--- /dev/null
+++ b/hw/i2c/omap_i2c.c
@@ -0,0 +1,492 @@
+/*
+ * TI OMAP on-chip I2C controller.  Only "new I2C" mode supported.
+ *
+ * Copyright (C) 2007 Andrzej Zaborowski  <balrog@zabor.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/arm/omap.h"
+#include "hw/sysbus.h"
+
+
+typedef struct OMAPI2CState {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    qemu_irq irq;
+    qemu_irq drq[2];
+    i2c_bus *bus;
+
+    uint8_t revision;
+    void *iclk;
+    void *fclk;
+
+    uint8_t mask;
+    uint16_t stat;
+    uint16_t dma;
+    uint16_t count;
+    int count_cur;
+    uint32_t fifo;
+    int rxlen;
+    int txlen;
+    uint16_t control;
+    uint16_t addr[2];
+    uint8_t divider;
+    uint8_t times[2];
+    uint16_t test;
+} OMAPI2CState;
+
+#define OMAP2_INTR_REV	0x34
+#define OMAP2_GC_REV	0x34
+
+static void omap_i2c_interrupts_update(OMAPI2CState *s)
+{
+    qemu_set_irq(s->irq, s->stat & s->mask);
+    if ((s->dma >> 15) & 1)					/* RDMA_EN */
+        qemu_set_irq(s->drq[0], (s->stat >> 3) & 1);		/* RRDY */
+    if ((s->dma >> 7) & 1)					/* XDMA_EN */
+        qemu_set_irq(s->drq[1], (s->stat >> 4) & 1);		/* XRDY */
+}
+
+static void omap_i2c_fifo_run(OMAPI2CState *s)
+{
+    int ack = 1;
+
+    if (!i2c_bus_busy(s->bus))
+        return;
+
+    if ((s->control >> 2) & 1) {				/* RM */
+        if ((s->control >> 1) & 1) {				/* STP */
+            i2c_end_transfer(s->bus);
+            s->control &= ~(1 << 1);				/* STP */
+            s->count_cur = s->count;
+            s->txlen = 0;
+        } else if ((s->control >> 9) & 1) {			/* TRX */
+            while (ack && s->txlen)
+                ack = (i2c_send(s->bus,
+                                        (s->fifo >> ((-- s->txlen) << 3)) &
+                                        0xff) >= 0);
+            s->stat |= 1 << 4;					/* XRDY */
+        } else {
+            while (s->rxlen < 4)
+                s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
+            s->stat |= 1 << 3;					/* RRDY */
+        }
+    } else {
+        if ((s->control >> 9) & 1) {				/* TRX */
+            while (ack && s->count_cur && s->txlen) {
+                ack = (i2c_send(s->bus,
+                                        (s->fifo >> ((-- s->txlen) << 3)) &
+                                        0xff) >= 0);
+                s->count_cur --;
+            }
+            if (ack && s->count_cur)
+                s->stat |= 1 << 4;				/* XRDY */
+            else
+                s->stat &= ~(1 << 4);				/* XRDY */
+            if (!s->count_cur) {
+                s->stat |= 1 << 2;				/* ARDY */
+                s->control &= ~(1 << 10);			/* MST */
+            }
+        } else {
+            while (s->count_cur && s->rxlen < 4) {
+                s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
+                s->count_cur --;
+            }
+            if (s->rxlen)
+                s->stat |= 1 << 3;				/* RRDY */
+            else
+                s->stat &= ~(1 << 3);				/* RRDY */
+        }
+        if (!s->count_cur) {
+            if ((s->control >> 1) & 1) {			/* STP */
+                i2c_end_transfer(s->bus);
+                s->control &= ~(1 << 1);			/* STP */
+                s->count_cur = s->count;
+                s->txlen = 0;
+            } else {
+                s->stat |= 1 << 2;				/* ARDY */
+                s->control &= ~(1 << 10);			/* MST */
+            }
+        }
+    }
+
+    s->stat |= (!ack) << 1;					/* NACK */
+    if (!ack)
+        s->control &= ~(1 << 1);				/* STP */
+}
+
+static void omap_i2c_reset(DeviceState *dev)
+{
+    OMAPI2CState *s = FROM_SYSBUS(OMAPI2CState,
+                                  SYS_BUS_DEVICE(dev));
+    s->mask = 0;
+    s->stat = 0;
+    s->dma = 0;
+    s->count = 0;
+    s->count_cur = 0;
+    s->fifo = 0;
+    s->rxlen = 0;
+    s->txlen = 0;
+    s->control = 0;
+    s->addr[0] = 0;
+    s->addr[1] = 0;
+    s->divider = 0;
+    s->times[0] = 0;
+    s->times[1] = 0;
+    s->test = 0;
+}
+
+static uint32_t omap_i2c_read(void *opaque, hwaddr addr)
+{
+    OMAPI2CState *s = opaque;
+    int offset = addr & OMAP_MPUI_REG_MASK;
+    uint16_t ret;
+
+    switch (offset) {
+    case 0x00:	/* I2C_REV */
+        return s->revision;					/* REV */
+
+    case 0x04:	/* I2C_IE */
+        return s->mask;
+
+    case 0x08:	/* I2C_STAT */
+        return s->stat | (i2c_bus_busy(s->bus) << 12);
+
+    case 0x0c:	/* I2C_IV */
+        if (s->revision >= OMAP2_INTR_REV)
+            break;
+        ret = ffs(s->stat & s->mask);
+        if (ret)
+            s->stat ^= 1 << (ret - 1);
+        omap_i2c_interrupts_update(s);
+        return ret;
+
+    case 0x10:	/* I2C_SYSS */
+        return (s->control >> 15) & 1;				/* I2C_EN */
+
+    case 0x14:	/* I2C_BUF */
+        return s->dma;
+
+    case 0x18:	/* I2C_CNT */
+        return s->count_cur;					/* DCOUNT */
+
+    case 0x1c:	/* I2C_DATA */
+        ret = 0;
+        if (s->control & (1 << 14)) {				/* BE */
+            ret |= ((s->fifo >> 0) & 0xff) << 8;
+            ret |= ((s->fifo >> 8) & 0xff) << 0;
+        } else {
+            ret |= ((s->fifo >> 8) & 0xff) << 8;
+            ret |= ((s->fifo >> 0) & 0xff) << 0;
+        }
+        if (s->rxlen == 1) {
+            s->stat |= 1 << 15;					/* SBD */
+            s->rxlen = 0;
+        } else if (s->rxlen > 1) {
+            if (s->rxlen > 2)
+                s->fifo >>= 16;
+            s->rxlen -= 2;
+        } else {
+            /* XXX: remote access (qualifier) error - what's that?  */
+        }
+        if (!s->rxlen) {
+            s->stat &= ~(1 << 3);				/* RRDY */
+            if (((s->control >> 10) & 1) &&			/* MST */
+                            ((~s->control >> 9) & 1)) {		/* TRX */
+                s->stat |= 1 << 2;				/* ARDY */
+                s->control &= ~(1 << 10);			/* MST */
+            }
+        }
+        s->stat &= ~(1 << 11);					/* ROVR */
+        omap_i2c_fifo_run(s);
+        omap_i2c_interrupts_update(s);
+        return ret;
+
+    case 0x20:	/* I2C_SYSC */
+        return 0;
+
+    case 0x24:	/* I2C_CON */
+        return s->control;
+
+    case 0x28:	/* I2C_OA */
+        return s->addr[0];
+
+    case 0x2c:	/* I2C_SA */
+        return s->addr[1];
+
+    case 0x30:	/* I2C_PSC */
+        return s->divider;
+
+    case 0x34:	/* I2C_SCLL */
+        return s->times[0];
+
+    case 0x38:	/* I2C_SCLH */
+        return s->times[1];
+
+    case 0x3c:	/* I2C_SYSTEST */
+        if (s->test & (1 << 15)) {				/* ST_EN */
+            s->test ^= 0xa;
+            return s->test;
+        } else
+            return s->test & ~0x300f;
+    }
+
+    OMAP_BAD_REG(addr);
+    return 0;
+}
+
+static void omap_i2c_write(void *opaque, hwaddr addr,
+                uint32_t value)
+{
+    OMAPI2CState *s = opaque;
+    int offset = addr & OMAP_MPUI_REG_MASK;
+    int nack;
+
+    switch (offset) {
+    case 0x00:	/* I2C_REV */
+    case 0x0c:	/* I2C_IV */
+    case 0x10:	/* I2C_SYSS */
+        OMAP_RO_REG(addr);
+        return;
+
+    case 0x04:	/* I2C_IE */
+        s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f);
+        break;
+
+    case 0x08:	/* I2C_STAT */
+        if (s->revision < OMAP2_INTR_REV) {
+            OMAP_RO_REG(addr);
+            return;
+        }
+
+        /* RRDY and XRDY are reset by hardware. (in all versions???) */
+        s->stat &= ~(value & 0x27);
+        omap_i2c_interrupts_update(s);
+        break;
+
+    case 0x14:	/* I2C_BUF */
+        s->dma = value & 0x8080;
+        if (value & (1 << 15))					/* RDMA_EN */
+            s->mask &= ~(1 << 3);				/* RRDY_IE */
+        if (value & (1 << 7))					/* XDMA_EN */
+            s->mask &= ~(1 << 4);				/* XRDY_IE */
+        break;
+
+    case 0x18:	/* I2C_CNT */
+        s->count = value;					/* DCOUNT */
+        break;
+
+    case 0x1c:	/* I2C_DATA */
+        if (s->txlen > 2) {
+            /* XXX: remote access (qualifier) error - what's that?  */
+            break;
+        }
+        s->fifo <<= 16;
+        s->txlen += 2;
+        if (s->control & (1 << 14)) {				/* BE */
+            s->fifo |= ((value >> 8) & 0xff) << 8;
+            s->fifo |= ((value >> 0) & 0xff) << 0;
+        } else {
+            s->fifo |= ((value >> 0) & 0xff) << 8;
+            s->fifo |= ((value >> 8) & 0xff) << 0;
+        }
+        s->stat &= ~(1 << 10);					/* XUDF */
+        if (s->txlen > 2)
+            s->stat &= ~(1 << 4);				/* XRDY */
+        omap_i2c_fifo_run(s);
+        omap_i2c_interrupts_update(s);
+        break;
+
+    case 0x20:	/* I2C_SYSC */
+        if (s->revision < OMAP2_INTR_REV) {
+            OMAP_BAD_REG(addr);
+            return;
+        }
+
+        if (value & 2)
+            omap_i2c_reset(&s->busdev.qdev);
+        break;
+
+    case 0x24:	/* I2C_CON */
+        s->control = value & 0xcf87;
+        if (~value & (1 << 15)) {				/* I2C_EN */
+            if (s->revision < OMAP2_INTR_REV)
+                omap_i2c_reset(&s->busdev.qdev);
+            break;
+        }
+        if ((value & (1 << 15)) && !(value & (1 << 10))) {	/* MST */
+            fprintf(stderr, "%s: I^2C slave mode not supported\n",
+                            __FUNCTION__);
+            break;
+        }
+        if ((value & (1 << 15)) && value & (1 << 8)) {		/* XA */
+            fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
+                            __FUNCTION__);
+            break;
+        }
+        if ((value & (1 << 15)) && value & (1 << 0)) {		/* STT */
+            nack = !!i2c_start_transfer(s->bus, s->addr[1],	/* SA */
+                            (~value >> 9) & 1);			/* TRX */
+            s->stat |= nack << 1;				/* NACK */
+            s->control &= ~(1 << 0);				/* STT */
+            s->fifo = 0;
+            if (nack)
+                s->control &= ~(1 << 1);			/* STP */
+            else {
+                s->count_cur = s->count;
+                omap_i2c_fifo_run(s);
+            }
+            omap_i2c_interrupts_update(s);
+        }
+        break;
+
+    case 0x28:	/* I2C_OA */
+        s->addr[0] = value & 0x3ff;
+        break;
+
+    case 0x2c:	/* I2C_SA */
+        s->addr[1] = value & 0x3ff;
+        break;
+
+    case 0x30:	/* I2C_PSC */
+        s->divider = value;
+        break;
+
+    case 0x34:	/* I2C_SCLL */
+        s->times[0] = value;
+        break;
+
+    case 0x38:	/* I2C_SCLH */
+        s->times[1] = value;
+        break;
+
+    case 0x3c:	/* I2C_SYSTEST */
+        s->test = value & 0xf80f;
+        if (value & (1 << 11))					/* SBB */
+            if (s->revision >= OMAP2_INTR_REV) {
+                s->stat |= 0x3f;
+                omap_i2c_interrupts_update(s);
+            }
+        if (value & (1 << 15))					/* ST_EN */
+            fprintf(stderr, "%s: System Test not supported\n", __FUNCTION__);
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+static void omap_i2c_writeb(void *opaque, hwaddr addr,
+                uint32_t value)
+{
+    OMAPI2CState *s = opaque;
+    int offset = addr & OMAP_MPUI_REG_MASK;
+
+    switch (offset) {
+    case 0x1c:	/* I2C_DATA */
+        if (s->txlen > 2) {
+            /* XXX: remote access (qualifier) error - what's that?  */
+            break;
+        }
+        s->fifo <<= 8;
+        s->txlen += 1;
+        s->fifo |= value & 0xff;
+        s->stat &= ~(1 << 10);					/* XUDF */
+        if (s->txlen > 2)
+            s->stat &= ~(1 << 4);				/* XRDY */
+        omap_i2c_fifo_run(s);
+        omap_i2c_interrupts_update(s);
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+static const MemoryRegionOps omap_i2c_ops = {
+    .old_mmio = {
+        .read = {
+            omap_badwidth_read16,
+            omap_i2c_read,
+            omap_badwidth_read16,
+        },
+        .write = {
+            omap_i2c_writeb, /* Only the last fifo write can be 8 bit.  */
+            omap_i2c_write,
+            omap_badwidth_write16,
+        },
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int omap_i2c_init(SysBusDevice *dev)
+{
+    OMAPI2CState *s = FROM_SYSBUS(OMAPI2CState, dev);
+
+    if (!s->fclk) {
+        hw_error("omap_i2c: fclk not connected\n");
+    }
+    if (s->revision >= OMAP2_INTR_REV && !s->iclk) {
+        /* Note that OMAP1 doesn't have a separate interface clock */
+        hw_error("omap_i2c: iclk not connected\n");
+    }
+    sysbus_init_irq(dev, &s->irq);
+    sysbus_init_irq(dev, &s->drq[0]);
+    sysbus_init_irq(dev, &s->drq[1]);
+    memory_region_init_io(&s->iomem, &omap_i2c_ops, s, "omap.i2c",
+                          (s->revision < OMAP2_INTR_REV) ? 0x800 : 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    s->bus = i2c_init_bus(&dev->qdev, NULL);
+    return 0;
+}
+
+static Property omap_i2c_properties[] = {
+    DEFINE_PROP_UINT8("revision", OMAPI2CState, revision, 0),
+    DEFINE_PROP_PTR("iclk", OMAPI2CState, iclk),
+    DEFINE_PROP_PTR("fclk", OMAPI2CState, fclk),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap_i2c_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    k->init = omap_i2c_init;
+    dc->props = omap_i2c_properties;
+    dc->reset = omap_i2c_reset;
+}
+
+static const TypeInfo omap_i2c_info = {
+    .name = "omap_i2c",
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(OMAPI2CState),
+    .class_init = omap_i2c_class_init,
+};
+
+static void omap_i2c_register_types(void)
+{
+    type_register_static(&omap_i2c_info);
+}
+
+i2c_bus *omap_i2c_bus(DeviceState *omap_i2c)
+{
+    OMAPI2CState *s = FROM_SYSBUS(OMAPI2CState, SYS_BUS_DEVICE(omap_i2c));
+    return s->bus;
+}
+
+type_init(omap_i2c_register_types)