Linux headers: update

Update against Linux 5.8-rc1.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>

25 files changed, 818 insertions, 33 deletions

diff --git a/include/standard-headers/asm-x86/kvm_para.h b/include/standard-headers/asm-x86/kvm_para.h
index 90604a8fb7..07877d3295 100644
--- a/include/standard-headers/asm-x86/kvm_para.h
+++ b/include/standard-headers/asm-x86/kvm_para.h
@@ -31,6 +31,7 @@
 #define KVM_FEATURE_PV_SEND_IPI	11
 #define KVM_FEATURE_POLL_CONTROL	12
 #define KVM_FEATURE_PV_SCHED_YIELD	13
+#define KVM_FEATURE_ASYNC_PF_INT	14
 
 #define KVM_HINTS_REALTIME      0
 
@@ -50,6 +51,8 @@
 #define MSR_KVM_STEAL_TIME  0x4b564d03
 #define MSR_KVM_PV_EOI_EN      0x4b564d04
 #define MSR_KVM_POLL_CONTROL	0x4b564d05
+#define MSR_KVM_ASYNC_PF_INT	0x4b564d06
+#define MSR_KVM_ASYNC_PF_ACK	0x4b564d07
 
 struct kvm_steal_time {
 	uint64_t steal;
@@ -81,6 +84,11 @@ struct kvm_clock_pairing {
 #define KVM_ASYNC_PF_ENABLED			(1 << 0)
 #define KVM_ASYNC_PF_SEND_ALWAYS		(1 << 1)
 #define KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT	(1 << 2)
+#define KVM_ASYNC_PF_DELIVERY_AS_INT		(1 << 3)
+
+/* MSR_KVM_ASYNC_PF_INT */
+#define KVM_ASYNC_PF_VEC_MASK			GENMASK(7, 0)
+
 
 /* Operations for KVM_HC_MMU_OP */
 #define KVM_MMU_OP_WRITE_PTE            1
@@ -112,8 +120,13 @@ struct kvm_mmu_op_release_pt {
 #define KVM_PV_REASON_PAGE_READY 2
 
 struct kvm_vcpu_pv_apf_data {
-	uint32_t reason;
-	uint8_t pad[60];
+	/* Used for 'page not present' events delivered via #PF */
+	uint32_t flags;
+
+	/* Used for 'page ready' events delivered via interrupt notification */
+	uint32_t token;
+
+	uint8_t pad[56];
 	uint32_t enabled;
 };
 
diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h
index 66e838074c..909a66753c 100644
--- a/include/standard-headers/drm/drm_fourcc.h
+++ b/include/standard-headers/drm/drm_fourcc.h
@@ -353,9 +353,12 @@ extern "C" {
  * a platform-dependent stride. On top of that the memory can apply
  * platform-depending swizzling of some higher address bits into bit6.
  *
- * This format is highly platforms specific and not useful for cross-driver
- * sharing. It exists since on a given platform it does uniquely identify the
- * layout in a simple way for i915-specific userspace.
+ * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets.
+ * On earlier platforms the is highly platforms specific and not useful for
+ * cross-driver sharing. It exists since on a given platform it does uniquely
+ * identify the layout in a simple way for i915-specific userspace, which
+ * facilitated conversion of userspace to modifiers. Additionally the exact
+ * format on some really old platforms is not known.
  */
 #define I915_FORMAT_MOD_X_TILED	fourcc_mod_code(INTEL, 1)
 
@@ -368,9 +371,12 @@ extern "C" {
  * memory can apply platform-depending swizzling of some higher address bits
  * into bit6.
  *
- * This format is highly platforms specific and not useful for cross-driver
- * sharing. It exists since on a given platform it does uniquely identify the
- * layout in a simple way for i915-specific userspace.
+ * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets.
+ * On earlier platforms the is highly platforms specific and not useful for
+ * cross-driver sharing. It exists since on a given platform it does uniquely
+ * identify the layout in a simple way for i915-specific userspace, which
+ * facilitated conversion of userspace to modifiers. Additionally the exact
+ * format on some really old platforms is not known.
  */
 #define I915_FORMAT_MOD_Y_TILED	fourcc_mod_code(INTEL, 2)
 
@@ -520,7 +526,113 @@ extern "C" {
 #define DRM_FORMAT_MOD_NVIDIA_TEGRA_TILED fourcc_mod_code(NVIDIA, 1)
 
 /*
- * 16Bx2 Block Linear layout, used by desktop GPUs, and Tegra K1 and later
+ * Generalized Block Linear layout, used by desktop GPUs starting with NV50/G80,
+ * and Tegra GPUs starting with Tegra K1.
+ *
+ * Pixels are arranged in Groups of Bytes (GOBs).  GOB size and layout varies
+ * based on the architecture generation.  GOBs themselves are then arranged in
+ * 3D blocks, with the block dimensions (in terms of GOBs) always being a power
+ * of two, and hence expressible as their log2 equivalent (E.g., "2" represents
+ * a block depth or height of "4").
+ *
+ * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format
+ * in full detail.
+ *
+ *       Macro
+ * Bits  Param Description
+ * ----  ----- -----------------------------------------------------------------
+ *
+ *  3:0  h     log2(height) of each block, in GOBs.  Placed here for
+ *             compatibility with the existing
+ *             DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers.
+ *
+ *  4:4  -     Must be 1, to indicate block-linear layout.  Necessary for
+ *             compatibility with the existing
+ *             DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers.
+ *
+ *  8:5  -     Reserved (To support 3D-surfaces with variable log2(depth) block
+ *             size).  Must be zero.
+ *
+ *             Note there is no log2(width) parameter.  Some portions of the
+ *             hardware support a block width of two gobs, but it is impractical
+ *             to use due to lack of support elsewhere, and has no known
+ *             benefits.
+ *
+ * 11:9  -     Reserved (To support 2D-array textures with variable array stride
+ *             in blocks, specified via log2(tile width in blocks)).  Must be
+ *             zero.
+ *
+ * 19:12 k     Page Kind.  This value directly maps to a field in the page
+ *             tables of all GPUs >= NV50.  It affects the exact layout of bits
+ *             in memory and can be derived from the tuple
+ *
+ *               (format, GPU model, compression type, samples per pixel)
+ *
+ *             Where compression type is defined below.  If GPU model were
+ *             implied by the format modifier, format, or memory buffer, page
+ *             kind would not need to be included in the modifier itself, but
+ *             since the modifier should define the layout of the associated
+ *             memory buffer independent from any device or other context, it
+ *             must be included here.
+ *
+ * 21:20 g     GOB Height and Page Kind Generation.  The height of a GOB changed
+ *             starting with Fermi GPUs.  Additionally, the mapping between page
+ *             kind and bit layout has changed at various points.
+ *
+ *               0 = Gob Height 8, Fermi - Volta, Tegra K1+ Page Kind mapping
+ *               1 = Gob Height 4, G80 - GT2XX Page Kind mapping
+ *               2 = Gob Height 8, Turing+ Page Kind mapping
+ *               3 = Reserved for future use.
+ *
+ * 22:22 s     Sector layout.  On Tegra GPUs prior to Xavier, there is a further
+ *             bit remapping step that occurs at an even lower level than the
+ *             page kind and block linear swizzles.  This causes the layout of
+ *             surfaces mapped in those SOC's GPUs to be incompatible with the
+ *             equivalent mapping on other GPUs in the same system.
+ *
+ *               0 = Tegra K1 - Tegra Parker/TX2 Layout.
+ *               1 = Desktop GPU and Tegra Xavier+ Layout
+ *
+ * 25:23 c     Lossless Framebuffer Compression type.
+ *
+ *               0 = none
+ *               1 = ROP/3D, layout 1, exact compression format implied by Page
+ *                   Kind field
+ *               2 = ROP/3D, layout 2, exact compression format implied by Page
+ *                   Kind field
+ *               3 = CDE horizontal
+ *               4 = CDE vertical
+ *               5 = Reserved for future use
+ *               6 = Reserved for future use
+ *               7 = Reserved for future use
+ *
+ * 55:25 -     Reserved for future use.  Must be zero.
+ */
+#define DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(c, s, g, k, h) \
+	fourcc_mod_code(NVIDIA, (0x10 | \
+				 ((h) & 0xf) | \
+				 (((k) & 0xff) << 12) | \
+				 (((g) & 0x3) << 20) | \
+				 (((s) & 0x1) << 22) | \
+				 (((c) & 0x7) << 23)))
+
+/* To grandfather in prior block linear format modifiers to the above layout,
+ * the page kind "0", which corresponds to "pitch/linear" and hence is unusable
+ * with block-linear layouts, is remapped within drivers to the value 0xfe,
+ * which corresponds to the "generic" kind used for simple single-sample
+ * uncompressed color formats on Fermi - Volta GPUs.
+ */
+static inline uint64_t
+drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier)
+{
+	if (!(modifier & 0x10) || (modifier & (0xff << 12)))
+		return modifier;
+	else
+		return modifier | (0xfe << 12);
+}
+
+/*
+ * 16Bx2 Block Linear layout, used by Tegra K1 and later
  *
  * Pixels are arranged in 64x8 Groups Of Bytes (GOBs). GOBs are then stacked
  * vertically by a power of 2 (1 to 32 GOBs) to form a block.
@@ -541,20 +653,20 @@ extern "C" {
  * in full detail.
  */
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(v) \
-	fourcc_mod_code(NVIDIA, 0x10 | ((v) & 0xf))
+	DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(0, 0, 0, 0, (v))
 
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_ONE_GOB \
-	fourcc_mod_code(NVIDIA, 0x10)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(0)
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_TWO_GOB \
-	fourcc_mod_code(NVIDIA, 0x11)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(1)
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_FOUR_GOB \
-	fourcc_mod_code(NVIDIA, 0x12)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(2)
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_EIGHT_GOB \
-	fourcc_mod_code(NVIDIA, 0x13)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(3)
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_SIXTEEN_GOB \
-	fourcc_mod_code(NVIDIA, 0x14)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(4)
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_THIRTYTWO_GOB \
-	fourcc_mod_code(NVIDIA, 0x15)
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(5)
 
 /*
  * Some Broadcom modifiers take parameters, for example the number of
diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h
index 1200890c86..fd8d2cccfe 100644
--- a/include/standard-headers/linux/ethtool.h
+++ b/include/standard-headers/linux/ethtool.h
@@ -1666,6 +1666,18 @@ static inline int ethtool_validate_duplex(uint8_t duplex)
 	return 0;
 }
 
+#define MASTER_SLAVE_CFG_UNSUPPORTED		0
+#define MASTER_SLAVE_CFG_UNKNOWN		1
+#define MASTER_SLAVE_CFG_MASTER_PREFERRED	2
+#define MASTER_SLAVE_CFG_SLAVE_PREFERRED	3
+#define MASTER_SLAVE_CFG_MASTER_FORCE		4
+#define MASTER_SLAVE_CFG_SLAVE_FORCE		5
+#define MASTER_SLAVE_STATE_UNSUPPORTED		0
+#define MASTER_SLAVE_STATE_UNKNOWN		1
+#define MASTER_SLAVE_STATE_MASTER		2
+#define MASTER_SLAVE_STATE_SLAVE		3
+#define MASTER_SLAVE_STATE_ERR			4
+
 /* Which connector port. */
 #define PORT_TP			0x00
 #define PORT_AUI		0x01
@@ -1904,7 +1916,9 @@ struct ethtool_link_settings {
 	uint8_t	eth_tp_mdix_ctrl;
 	int8_t	link_mode_masks_nwords;
 	uint8_t	transceiver;
-	uint8_t	reserved1[3];
+	uint8_t	master_slave_cfg;
+	uint8_t	master_slave_state;
+	uint8_t	reserved1[1];
 	uint32_t	reserved[7];
 	uint32_t	link_mode_masks[0];
 	/* layout of link_mode_masks fields:
diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
index ecc27a1740..b052355ac7 100644
--- a/include/standard-headers/linux/virtio_ids.h
+++ b/include/standard-headers/linux/virtio_ids.h
@@ -44,6 +44,7 @@
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
 #define VIRTIO_ID_IOMMU        23 /* virtio IOMMU */
+#define VIRTIO_ID_MEM          24 /* virtio mem */
 #define VIRTIO_ID_FS           26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM         27 /* virtio pmem */
 #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
diff --git a/include/standard-headers/linux/virtio_mem.h b/include/standard-headers/linux/virtio_mem.h
new file mode 100644
index 0000000000..05e5ade75d
--- /dev/null
+++ b/include/standard-headers/linux/virtio_mem.h
@@ -0,0 +1,211 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Virtio Mem Device
+ *
+ * Copyright Red Hat, Inc. 2020
+ *
+ * Authors:
+ *     David Hildenbrand <david@redhat.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions
+ * to implement compatible drivers/servers:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MEM_H
+#define _LINUX_VIRTIO_MEM_H
+
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+
+/*
+ * Each virtio-mem device manages a dedicated region in physical address
+ * space. Each device can belong to a single NUMA node, multiple devices
+ * for a single NUMA node are possible. A virtio-mem device is like a
+ * "resizable DIMM" consisting of small memory blocks that can be plugged
+ * or unplugged. The device driver is responsible for (un)plugging memory
+ * blocks on demand.
+ *
+ * Virtio-mem devices can only operate on their assigned memory region in
+ * order to (un)plug memory. A device cannot (un)plug memory belonging to
+ * other devices.
+ *
+ * The "region_size" corresponds to the maximum amount of memory that can
+ * be provided by a device. The "size" corresponds to the amount of memory
+ * that is currently plugged. "requested_size" corresponds to a request
+ * from the device to the device driver to (un)plug blocks. The
+ * device driver should try to (un)plug blocks in order to reach the
+ * "requested_size". It is impossible to plug more memory than requested.
+ *
+ * The "usable_region_size" represents the memory region that can actually
+ * be used to (un)plug memory. It is always at least as big as the
+ * "requested_size" and will grow dynamically. It will only shrink when
+ * explicitly triggered (VIRTIO_MEM_REQ_UNPLUG).
+ *
+ * There are no guarantees what will happen if unplugged memory is
+ * read/written. Such memory should, in general, not be touched. E.g.,
+ * even writing might succeed, but the values will simply be discarded at
+ * random points in time.
+ *
+ * It can happen that the device cannot process a request, because it is
+ * busy. The device driver has to retry later.
+ *
+ * Usually, during system resets all memory will get unplugged, so the
+ * device driver can start with a clean state. However, in specific
+ * scenarios (if the device is busy) it can happen that the device still
+ * has memory plugged. The device driver can request to unplug all memory
+ * (VIRTIO_MEM_REQ_UNPLUG) - which might take a while to succeed if the
+ * device is busy.
+ */
+
+/* --- virtio-mem: feature bits --- */
+
+/* node_id is an ACPI PXM and is valid */
+#define VIRTIO_MEM_F_ACPI_PXM		0
+
+
+/* --- virtio-mem: guest -> host requests --- */
+
+/* request to plug memory blocks */
+#define VIRTIO_MEM_REQ_PLUG			0
+/* request to unplug memory blocks */
+#define VIRTIO_MEM_REQ_UNPLUG			1
+/* request to unplug all blocks and shrink the usable size */
+#define VIRTIO_MEM_REQ_UNPLUG_ALL		2
+/* request information about the plugged state of memory blocks */
+#define VIRTIO_MEM_REQ_STATE			3
+
+struct virtio_mem_req_plug {
+	__virtio64 addr;
+	__virtio16 nb_blocks;
+	__virtio16 padding[3];
+};
+
+struct virtio_mem_req_unplug {
+	__virtio64 addr;
+	__virtio16 nb_blocks;
+	__virtio16 padding[3];
+};
+
+struct virtio_mem_req_state {
+	__virtio64 addr;
+	__virtio16 nb_blocks;
+	__virtio16 padding[3];
+};
+
+struct virtio_mem_req {
+	__virtio16 type;
+	__virtio16 padding[3];
+
+	union {
+		struct virtio_mem_req_plug plug;
+		struct virtio_mem_req_unplug unplug;
+		struct virtio_mem_req_state state;
+	} u;
+};
+
+
+/* --- virtio-mem: host -> guest response --- */
+
+/*
+ * Request processed successfully, applicable for
+ * - VIRTIO_MEM_REQ_PLUG
+ * - VIRTIO_MEM_REQ_UNPLUG
+ * - VIRTIO_MEM_REQ_UNPLUG_ALL
+ * - VIRTIO_MEM_REQ_STATE
+ */
+#define VIRTIO_MEM_RESP_ACK			0
+/*
+ * Request denied - e.g. trying to plug more than requested, applicable for
+ * - VIRTIO_MEM_REQ_PLUG
+ */
+#define VIRTIO_MEM_RESP_NACK			1
+/*
+ * Request cannot be processed right now, try again later, applicable for
+ * - VIRTIO_MEM_REQ_PLUG
+ * - VIRTIO_MEM_REQ_UNPLUG
+ * - VIRTIO_MEM_REQ_UNPLUG_ALL
+ */
+#define VIRTIO_MEM_RESP_BUSY			2
+/*
+ * Error in request (e.g. addresses/alignment), applicable for
+ * - VIRTIO_MEM_REQ_PLUG
+ * - VIRTIO_MEM_REQ_UNPLUG
+ * - VIRTIO_MEM_REQ_STATE
+ */
+#define VIRTIO_MEM_RESP_ERROR			3
+
+
+/* State of memory blocks is "plugged" */
+#define VIRTIO_MEM_STATE_PLUGGED		0
+/* State of memory blocks is "unplugged" */
+#define VIRTIO_MEM_STATE_UNPLUGGED		1
+/* State of memory blocks is "mixed" */
+#define VIRTIO_MEM_STATE_MIXED			2
+
+struct virtio_mem_resp_state {
+	__virtio16 state;
+};
+
+struct virtio_mem_resp {
+	__virtio16 type;
+	__virtio16 padding[3];
+
+	union {
+		struct virtio_mem_resp_state state;
+	} u;
+};
+
+/* --- virtio-mem: configuration --- */
+
+struct virtio_mem_config {
+	/* Block size and alignment. Cannot change. */
+	uint64_t block_size;
+	/* Valid with VIRTIO_MEM_F_ACPI_PXM. Cannot change. */
+	uint16_t node_id;
+	uint8_t padding[6];
+	/* Start address of the memory region. Cannot change. */
+	uint64_t addr;
+	/* Region size (maximum). Cannot change. */
+	uint64_t region_size;
+	/*
+	 * Currently usable region size. Can grow up to region_size. Can
+	 * shrink due to VIRTIO_MEM_REQ_UNPLUG_ALL (in which case no config
+	 * update will be sent).
+	 */
+	uint64_t usable_region_size;
+	/*
+	 * Currently used size. Changes due to plug/unplug requests, but no
+	 * config updates will be sent.
+	 */
+	uint64_t plugged_size;
+	/* Requested size. New plug requests cannot exceed it. Can change. */
+	uint64_t requested_size;
+};
+
+#endif /* _LINUX_VIRTIO_MEM_H */
diff --git a/include/standard-headers/linux/virtio_ring.h b/include/standard-headers/linux/virtio_ring.h
index f230fed479..0fa0e1067f 100644
--- a/include/standard-headers/linux/virtio_ring.h
+++ b/include/standard-headers/linux/virtio_ring.h
@@ -84,6 +84,13 @@
  * at the end of the used ring. Guest should ignore the used->flags field. */
 #define VIRTIO_RING_F_EVENT_IDX		29
 
+/* Alignment requirements for vring elements.
+ * When using pre-virtio 1.0 layout, these fall out naturally.
+ */
+#define VRING_AVAIL_ALIGN_SIZE 2
+#define VRING_USED_ALIGN_SIZE 4
+#define VRING_DESC_ALIGN_SIZE 16
+
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
 struct vring_desc {
 	/* Address (guest-physical). */
@@ -110,28 +117,47 @@ struct vring_used_elem {
 	__virtio32 len;
 };
 
+typedef struct vring_used_elem __attribute__((aligned(VRING_USED_ALIGN_SIZE)))
+	vring_used_elem_t;
+
 struct vring_used {
 	__virtio16 flags;
 	__virtio16 idx;
-	struct vring_used_elem ring[];
+	vring_used_elem_t ring[];
 };
 
+/*
+ * The ring element addresses are passed between components with different
+ * alignments assumptions. Thus, we might need to decrease the compiler-selected
+ * alignment, and so must use a typedef to make sure the aligned attribute
+ * actually takes hold:
+ *
+ * https://gcc.gnu.org/onlinedocs//gcc/Common-Type-Attributes.html#Common-Type-Attributes
+ *
+ * When used on a struct, or struct member, the aligned attribute can only
+ * increase the alignment; in order to decrease it, the packed attribute must
+ * be specified as well. When used as part of a typedef, the aligned attribute
+ * can both increase and decrease alignment, and specifying the packed
+ * attribute generates a warning.
+ */
+typedef struct vring_desc __attribute__((aligned(VRING_DESC_ALIGN_SIZE)))
+	vring_desc_t;
+typedef struct vring_avail __attribute__((aligned(VRING_AVAIL_ALIGN_SIZE)))
+	vring_avail_t;
+typedef struct vring_used __attribute__((aligned(VRING_USED_ALIGN_SIZE)))
+	vring_used_t;
+
 struct vring {
 	unsigned int num;
 
-	struct vring_desc *desc;
+	vring_desc_t *desc;
 
-	struct vring_avail *avail;
+	vring_avail_t *avail;
 
-	struct vring_used *used;
+	vring_used_t *used;
 };
 
-/* Alignment requirements for vring elements.
- * When using pre-virtio 1.0 layout, these fall out naturally.
- */
-#define VRING_AVAIL_ALIGN_SIZE 2
-#define VRING_USED_ALIGN_SIZE 4
-#define VRING_DESC_ALIGN_SIZE 16
+#ifndef VIRTIO_RING_NO_LEGACY
 
 /* The standard layout for the ring is a continuous chunk of memory which looks
  * like this.  We assume num is a power of 2.
@@ -179,6 +205,8 @@ static inline unsigned vring_size(unsigned int num, unsigned long align)
 		+ sizeof(__virtio16) * 3 + sizeof(struct vring_used_elem) * num;
 }
 
+#endif /* VIRTIO_RING_NO_LEGACY */
+
 /* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
 /* Assuming a given event_idx value from the other side, if
  * we have just incremented index from old to new_idx,
diff --git a/linux-headers/asm-arm64/mman.h b/linux-headers/asm-arm64/mman.h
index 8eebf89f5a..e94b9af859 100644
--- a/linux-headers/asm-arm64/mman.h
+++ b/linux-headers/asm-arm64/mman.h
@@ -1 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_MMAN_H
+#define __ASM_MMAN_H
+
 #include <asm-generic/mman.h>
+
+#define PROT_BTI	0x10		/* BTI guarded page */
+
+#endif /* ! _UAPI__ASM_MMAN_H */
diff --git a/linux-headers/asm-generic/unistd.h b/linux-headers/asm-generic/unistd.h
index 3a3201e461..f4a01305d9 100644
--- a/linux-headers/asm-generic/unistd.h
+++ b/linux-headers/asm-generic/unistd.h
@@ -855,9 +855,11 @@ __SYSCALL(__NR_clone3, sys_clone3)
 __SYSCALL(__NR_openat2, sys_openat2)
 #define __NR_pidfd_getfd 438
 __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd)
+#define __NR_faccessat2 439
+__SYSCALL(__NR_faccessat2, sys_faccessat2)
 
 #undef __NR_syscalls
-#define __NR_syscalls 439
+#define __NR_syscalls 440
 
 /*
  * 32 bit systems traditionally used different
diff --git a/linux-headers/asm-mips/unistd_n32.h b/linux-headers/asm-mips/unistd_n32.h
index aec9f6081a..3b9eda7e7d 100644
--- a/linux-headers/asm-mips/unistd_n32.h
+++ b/linux-headers/asm-mips/unistd_n32.h
@@ -367,6 +367,7 @@
 #define __NR_clone3	(__NR_Linux + 435)
 #define __NR_openat2	(__NR_Linux + 437)
 #define __NR_pidfd_getfd	(__NR_Linux + 438)
+#define __NR_faccessat2	(__NR_Linux + 439)
 
 
 #endif /* _ASM_MIPS_UNISTD_N32_H */
diff --git a/linux-headers/asm-mips/unistd_n64.h b/linux-headers/asm-mips/unistd_n64.h
index 1c75d83df5..9cdf9b6c60 100644
--- a/linux-headers/asm-mips/unistd_n64.h
+++ b/linux-headers/asm-mips/unistd_n64.h
@@ -343,6 +343,7 @@
 #define __NR_clone3	(__NR_Linux + 435)
 #define __NR_openat2	(__NR_Linux + 437)
 #define __NR_pidfd_getfd	(__NR_Linux + 438)
+#define __NR_faccessat2	(__NR_Linux + 439)
 
 
 #endif /* _ASM_MIPS_UNISTD_N64_H */
diff --git a/linux-headers/asm-mips/unistd_o32.h b/linux-headers/asm-mips/unistd_o32.h
index 660716e240..e3e5e238f0 100644
--- a/linux-headers/asm-mips/unistd_o32.h
+++ b/linux-headers/asm-mips/unistd_o32.h
@@ -413,6 +413,7 @@
 #define __NR_clone3	(__NR_Linux + 435)
 #define __NR_openat2	(__NR_Linux + 437)
 #define __NR_pidfd_getfd	(__NR_Linux + 438)
+#define __NR_faccessat2	(__NR_Linux + 439)
 
 
 #endif /* _ASM_MIPS_UNISTD_O32_H */
diff --git a/linux-headers/asm-powerpc/unistd_32.h b/linux-headers/asm-powerpc/unistd_32.h
index 4ba8e32f73..862edb7448 100644
--- a/linux-headers/asm-powerpc/unistd_32.h
+++ b/linux-headers/asm-powerpc/unistd_32.h
@@ -420,6 +420,7 @@
 #define __NR_clone3	435
 #define __NR_openat2	437
 #define __NR_pidfd_getfd	438
+#define __NR_faccessat2	439
 
 
 #endif /* _ASM_POWERPC_UNISTD_32_H */
diff --git a/linux-headers/asm-powerpc/unistd_64.h b/linux-headers/asm-powerpc/unistd_64.h
index ac20bb4f95..f553224ce4 100644
--- a/linux-headers/asm-powerpc/unistd_64.h
+++ b/linux-headers/asm-powerpc/unistd_64.h
@@ -392,6 +392,7 @@
 #define __NR_clone3	435
 #define __NR_openat2	437
 #define __NR_pidfd_getfd	438
+#define __NR_faccessat2	439
 
 
 #endif /* _ASM_POWERPC_UNISTD_64_H */
diff --git a/linux-headers/asm-s390/unistd_32.h b/linux-headers/asm-s390/unistd_32.h
index e4a6b654f1..e08233c0c3 100644
--- a/linux-headers/asm-s390/unistd_32.h
+++ b/linux-headers/asm-s390/unistd_32.h
@@ -410,5 +410,6 @@
 #define __NR_clone3 435
 #define __NR_openat2 437
 #define __NR_pidfd_getfd 438
+#define __NR_faccessat2 439
 
 #endif /* _ASM_S390_UNISTD_32_H */
diff --git a/linux-headers/asm-s390/unistd_64.h b/linux-headers/asm-s390/unistd_64.h
index 472f732956..560e19ae2b 100644
--- a/linux-headers/asm-s390/unistd_64.h
+++ b/linux-headers/asm-s390/unistd_64.h
@@ -358,5 +358,6 @@
 #define __NR_clone3 435
 #define __NR_openat2 437
 #define __NR_pidfd_getfd 438
+#define __NR_faccessat2 439
 
 #endif /* _ASM_S390_UNISTD_64_H */
diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index 3f3f780c8c..17c5a038f4 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -385,32 +385,48 @@ struct kvm_sync_regs {
 #define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4)
 
 #define KVM_STATE_NESTED_FORMAT_VMX	0
-#define KVM_STATE_NESTED_FORMAT_SVM	1	/* unused */
+#define KVM_STATE_NESTED_FORMAT_SVM	1
 
 #define KVM_STATE_NESTED_GUEST_MODE	0x00000001
 #define KVM_STATE_NESTED_RUN_PENDING	0x00000002
 #define KVM_STATE_NESTED_EVMCS		0x00000004
 #define KVM_STATE_NESTED_MTF_PENDING	0x00000008
+#define KVM_STATE_NESTED_GIF_SET	0x00000100
 
 #define KVM_STATE_NESTED_SMM_GUEST_MODE	0x00000001
 #define KVM_STATE_NESTED_SMM_VMXON	0x00000002
 
 #define KVM_STATE_NESTED_VMX_VMCS_SIZE	0x1000
 
+#define KVM_STATE_NESTED_SVM_VMCB_SIZE	0x1000
+
+#define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE	0x00000001
+
 struct kvm_vmx_nested_state_data {
 	__u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
 	__u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
 };
 
 struct kvm_vmx_nested_state_hdr {
+	__u32 flags;
 	__u64 vmxon_pa;
 	__u64 vmcs12_pa;
+	__u64 preemption_timer_deadline;
 
 	struct {
 		__u16 flags;
 	} smm;
 };
 
+struct kvm_svm_nested_state_data {
+	/* Save area only used if KVM_STATE_NESTED_RUN_PENDING.  */
+	__u8 vmcb12[KVM_STATE_NESTED_SVM_VMCB_SIZE];
+};
+
+struct kvm_svm_nested_state_hdr {
+	__u64 vmcb_pa;
+};
+
 /* for KVM_CAP_NESTED_STATE */
 struct kvm_nested_state {
 	__u16 flags;
@@ -419,6 +435,7 @@ struct kvm_nested_state {
 
 	union {
 		struct kvm_vmx_nested_state_hdr vmx;
+		struct kvm_svm_nested_state_hdr svm;
 
 		/* Pad the header to 128 bytes.  */
 		__u8 pad[120];
@@ -431,6 +448,7 @@ struct kvm_nested_state {
 	 */
 	union {
 		struct kvm_vmx_nested_state_data vmx[0];
+		struct kvm_svm_nested_state_data svm[0];
 	} data;
 };
 
diff --git a/linux-headers/asm-x86/unistd.h b/linux-headers/asm-x86/unistd.h
index 498d1515c6..d2af42d61d 100644
--- a/linux-headers/asm-x86/unistd.h
+++ b/linux-headers/asm-x86/unistd.h
@@ -2,8 +2,15 @@
 #ifndef _ASM_X86_UNISTD_H
 #define _ASM_X86_UNISTD_H
 
-/* x32 syscall flag bit */
-#define __X32_SYSCALL_BIT	0x40000000UL
+/*
+ * x32 syscall flag bit.  Some user programs expect syscall NR macros
+ * and __X32_SYSCALL_BIT to have type int, even though syscall numbers
+ * are, for practical purposes, unsigned long.
+ *
+ * Fortunately, expressions like (nr & ~__X32_SYSCALL_BIT) do the right
+ * thing regardless.
+ */
+#define __X32_SYSCALL_BIT	0x40000000
 
 # ifdef __i386__
 #  include <asm/unistd_32.h>
diff --git a/linux-headers/asm-x86/unistd_32.h b/linux-headers/asm-x86/unistd_32.h
index 1e6c1a5867..c727981d4a 100644
--- a/linux-headers/asm-x86/unistd_32.h
+++ b/linux-headers/asm-x86/unistd_32.h
@@ -428,6 +428,7 @@
 #define __NR_clone3 435
 #define __NR_openat2 437
 #define __NR_pidfd_getfd 438
+#define __NR_faccessat2 439
 
 
 #endif /* _ASM_X86_UNISTD_32_H */
diff --git a/linux-headers/asm-x86/unistd_64.h b/linux-headers/asm-x86/unistd_64.h
index 6daf0aecb2..843fa62745 100644
--- a/linux-headers/asm-x86/unistd_64.h
+++ b/linux-headers/asm-x86/unistd_64.h
@@ -350,6 +350,7 @@
 #define __NR_clone3 435
 #define __NR_openat2 437
 #define __NR_pidfd_getfd 438
+#define __NR_faccessat2 439
 
 
 #endif /* _ASM_X86_UNISTD_64_H */
diff --git a/linux-headers/asm-x86/unistd_x32.h b/linux-headers/asm-x86/unistd_x32.h
index e3f17ef370..7d63d703ca 100644
--- a/linux-headers/asm-x86/unistd_x32.h
+++ b/linux-headers/asm-x86/unistd_x32.h
@@ -303,6 +303,7 @@
 #define __NR_clone3 (__X32_SYSCALL_BIT + 435)
 #define __NR_openat2 (__X32_SYSCALL_BIT + 437)
 #define __NR_pidfd_getfd (__X32_SYSCALL_BIT + 438)
+#define __NR_faccessat2 (__X32_SYSCALL_BIT + 439)
 #define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
 #define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
 #define __NR_ioctl (__X32_SYSCALL_BIT + 514)
diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 9804495a46..a28c366737 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
 	 * ACPI gsi notion of irq.
 	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
 	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 * For ARM: See Documentation/virt/kvm/api.txt
+	 * For ARM: See Documentation/virt/kvm/api.rst
 	 */
 	union {
 		__u32 irq;
@@ -188,10 +188,13 @@ struct kvm_s390_cmma_log {
 struct kvm_hyperv_exit {
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
+#define KVM_EXIT_HYPERV_SYNDBG         3
 	__u32 type;
+	__u32 pad1;
 	union {
 		struct {
 			__u32 msr;
+			__u32 pad2;
 			__u64 control;
 			__u64 evt_page;
 			__u64 msg_page;
@@ -201,6 +204,15 @@ struct kvm_hyperv_exit {
 			__u64 result;
 			__u64 params[2];
 		} hcall;
+		struct {
+			__u32 msr;
+			__u32 pad2;
+			__u64 control;
+			__u64 status;
+			__u64 send_page;
+			__u64 recv_page;
+			__u64 pending_page;
+		} syndbg;
 	} u;
 };
 
@@ -1017,6 +1029,8 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_VCPU_RESETS 179
 #define KVM_CAP_S390_PROTECTED 180
 #define KVM_CAP_PPC_SECURE_GUEST 181
+#define KVM_CAP_HALT_POLL 182
+#define KVM_CAP_ASYNC_PF_INT 183
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1107,7 +1121,7 @@ struct kvm_xen_hvm_config {
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virt/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.rst.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
diff --git a/linux-headers/linux/psp-sev.h b/linux-headers/linux/psp-sev.h
index 31f971e896..51d8b3940e 100644
--- a/linux-headers/linux/psp-sev.h
+++ b/linux-headers/linux/psp-sev.h
@@ -83,6 +83,8 @@ struct sev_user_data_status {
 	__u32 guest_count;			/* Out */
 } __attribute__((packed));
 
+#define SEV_STATUS_FLAGS_CONFIG_ES	0x0100
+
 /**
  * struct sev_user_data_pek_csr - PEK_CSR command parameters
  *
diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index a41c452865..f09df262c4 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -305,6 +305,7 @@ struct vfio_region_info_cap_type {
 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK	(0xffff)
 #define VFIO_REGION_TYPE_GFX                    (1)
 #define VFIO_REGION_TYPE_CCW			(2)
+#define VFIO_REGION_TYPE_MIGRATION              (3)
 
 /* sub-types for VFIO_REGION_TYPE_PCI_* */
 
@@ -378,6 +379,235 @@ struct vfio_region_gfx_edid {
 
 /* sub-types for VFIO_REGION_TYPE_CCW */
 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD	(1)
+#define VFIO_REGION_SUBTYPE_CCW_SCHIB		(2)
+#define VFIO_REGION_SUBTYPE_CCW_CRW		(3)
+
+/* sub-types for VFIO_REGION_TYPE_MIGRATION */
+#define VFIO_REGION_SUBTYPE_MIGRATION           (1)
+
+/*
+ * The structure vfio_device_migration_info is placed at the 0th offset of
+ * the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related
+ * migration information. Field accesses from this structure are only supported
+ * at their native width and alignment. Otherwise, the result is undefined and
+ * vendor drivers should return an error.
+ *
+ * device_state: (read/write)
+ *      - The user application writes to this field to inform the vendor driver
+ *        about the device state to be transitioned to.
+ *      - The vendor driver should take the necessary actions to change the
+ *        device state. After successful transition to a given state, the
+ *        vendor driver should return success on write(device_state, state)
+ *        system call. If the device state transition fails, the vendor driver
+ *        should return an appropriate -errno for the fault condition.
+ *      - On the user application side, if the device state transition fails,
+ *	  that is, if write(device_state, state) returns an error, read
+ *	  device_state again to determine the current state of the device from
+ *	  the vendor driver.
+ *      - The vendor driver should return previous state of the device unless
+ *        the vendor driver has encountered an internal error, in which case
+ *        the vendor driver may report the device_state VFIO_DEVICE_STATE_ERROR.
+ *      - The user application must use the device reset ioctl to recover the
+ *        device from VFIO_DEVICE_STATE_ERROR state. If the device is
+ *        indicated to be in a valid device state by reading device_state, the
+ *        user application may attempt to transition the device to any valid
+ *        state reachable from the current state or terminate itself.
+ *
+ *      device_state consists of 3 bits:
+ *      - If bit 0 is set, it indicates the _RUNNING state. If bit 0 is clear,
+ *        it indicates the _STOP state. When the device state is changed to
+ *        _STOP, driver should stop the device before write() returns.
+ *      - If bit 1 is set, it indicates the _SAVING state, which means that the
+ *        driver should start gathering device state information that will be
+ *        provided to the VFIO user application to save the device's state.
+ *      - If bit 2 is set, it indicates the _RESUMING state, which means that
+ *        the driver should prepare to resume the device. Data provided through
+ *        the migration region should be used to resume the device.
+ *      Bits 3 - 31 are reserved for future use. To preserve them, the user
+ *      application should perform a read-modify-write operation on this
+ *      field when modifying the specified bits.
+ *
+ *  +------- _RESUMING
+ *  |+------ _SAVING
+ *  ||+----- _RUNNING
+ *  |||
+ *  000b => Device Stopped, not saving or resuming
+ *  001b => Device running, which is the default state
+ *  010b => Stop the device & save the device state, stop-and-copy state
+ *  011b => Device running and save the device state, pre-copy state
+ *  100b => Device stopped and the device state is resuming
+ *  101b => Invalid state
+ *  110b => Error state
+ *  111b => Invalid state
+ *
+ * State transitions:
+ *
+ *              _RESUMING  _RUNNING    Pre-copy    Stop-and-copy   _STOP
+ *                (100b)     (001b)     (011b)        (010b)       (000b)
+ * 0. Running or default state
+ *                             |
+ *
+ * 1. Normal Shutdown (optional)
+ *                             |------------------------------------->|
+ *
+ * 2. Save the state or suspend
+ *                             |------------------------->|---------->|
+ *
+ * 3. Save the state during live migration
+ *                             |----------->|------------>|---------->|
+ *
+ * 4. Resuming
+ *                  |<---------|
+ *
+ * 5. Resumed
+ *                  |--------->|
+ *
+ * 0. Default state of VFIO device is _RUNNNG when the user application starts.
+ * 1. During normal shutdown of the user application, the user application may
+ *    optionally change the VFIO device state from _RUNNING to _STOP. This
+ *    transition is optional. The vendor driver must support this transition but
+ *    must not require it.
+ * 2. When the user application saves state or suspends the application, the
+ *    device state transitions from _RUNNING to stop-and-copy and then to _STOP.
+ *    On state transition from _RUNNING to stop-and-copy, driver must stop the
+ *    device, save the device state and send it to the application through the
+ *    migration region. The sequence to be followed for such transition is given
+ *    below.
+ * 3. In live migration of user application, the state transitions from _RUNNING
+ *    to pre-copy, to stop-and-copy, and to _STOP.
+ *    On state transition from _RUNNING to pre-copy, the driver should start
+ *    gathering the device state while the application is still running and send
+ *    the device state data to application through the migration region.
+ *    On state transition from pre-copy to stop-and-copy, the driver must stop
+ *    the device, save the device state and send it to the user application
+ *    through the migration region.
+ *    Vendor drivers must support the pre-copy state even for implementations
+ *    where no data is provided to the user before the stop-and-copy state. The
+ *    user must not be required to consume all migration data before the device
+ *    transitions to a new state, including the stop-and-copy state.
+ *    The sequence to be followed for above two transitions is given below.
+ * 4. To start the resuming phase, the device state should be transitioned from
+ *    the _RUNNING to the _RESUMING state.
+ *    In the _RESUMING state, the driver should use the device state data
+ *    received through the migration region to resume the device.
+ * 5. After providing saved device data to the driver, the application should
+ *    change the state from _RESUMING to _RUNNING.
+ *
+ * reserved:
+ *      Reads on this field return zero and writes are ignored.
+ *
+ * pending_bytes: (read only)
+ *      The number of pending bytes still to be migrated from the vendor driver.
+ *
+ * data_offset: (read only)
+ *      The user application should read data_offset field from the migration
+ *      region. The user application should read the device data from this
+ *      offset within the migration region during the _SAVING state or write
+ *      the device data during the _RESUMING state. See below for details of
+ *      sequence to be followed.
+ *
+ * data_size: (read/write)
+ *      The user application should read data_size to get the size in bytes of
+ *      the data copied in the migration region during the _SAVING state and
+ *      write the size in bytes of the data copied in the migration region
+ *      during the _RESUMING state.
+ *
+ * The format of the migration region is as follows:
+ *  ------------------------------------------------------------------
+ * |vfio_device_migration_info|    data section                      |
+ * |                          |     ///////////////////////////////  |
+ * ------------------------------------------------------------------
+ *   ^                              ^
+ *  offset 0-trapped part        data_offset
+ *
+ * The structure vfio_device_migration_info is always followed by the data
+ * section in the region, so data_offset will always be nonzero. The offset
+ * from where the data is copied is decided by the kernel driver. The data
+ * section can be trapped, mmapped, or partitioned, depending on how the kernel
+ * driver defines the data section. The data section partition can be defined
+ * as mapped by the sparse mmap capability. If mmapped, data_offset must be
+ * page aligned, whereas initial section which contains the
+ * vfio_device_migration_info structure, might not end at the offset, which is
+ * page aligned. The user is not required to access through mmap regardless
+ * of the capabilities of the region mmap.
+ * The vendor driver should determine whether and how to partition the data
+ * section. The vendor driver should return data_offset accordingly.
+ *
+ * The sequence to be followed while in pre-copy state and stop-and-copy state
+ * is as follows:
+ * a. Read pending_bytes, indicating the start of a new iteration to get device
+ *    data. Repeated read on pending_bytes at this stage should have no side
+ *    effects.
+ *    If pending_bytes == 0, the user application should not iterate to get data
+ *    for that device.
+ *    If pending_bytes > 0, perform the following steps.
+ * b. Read data_offset, indicating that the vendor driver should make data
+ *    available through the data section. The vendor driver should return this
+ *    read operation only after data is available from (region + data_offset)
+ *    to (region + data_offset + data_size).
+ * c. Read data_size, which is the amount of data in bytes available through
+ *    the migration region.
+ *    Read on data_offset and data_size should return the offset and size of
+ *    the current buffer if the user application reads data_offset and
+ *    data_size more than once here.
+ * d. Read data_size bytes of data from (region + data_offset) from the
+ *    migration region.
+ * e. Process the data.
+ * f. Read pending_bytes, which indicates that the data from the previous
+ *    iteration has been read. If pending_bytes > 0, go to step b.
+ *
+ * The user application can transition from the _SAVING|_RUNNING
+ * (pre-copy state) to the _SAVING (stop-and-copy) state regardless of the
+ * number of pending bytes. The user application should iterate in _SAVING
+ * (stop-and-copy) until pending_bytes is 0.
+ *
+ * The sequence to be followed while _RESUMING device state is as follows:
+ * While data for this device is available, repeat the following steps:
+ * a. Read data_offset from where the user application should write data.
+ * b. Write migration data starting at the migration region + data_offset for
+ *    the length determined by data_size from the migration source.
+ * c. Write data_size, which indicates to the vendor driver that data is
+ *    written in the migration region. Vendor driver must return this write
+ *    operations on consuming data. Vendor driver should apply the
+ *    user-provided migration region data to the device resume state.
+ *
+ * If an error occurs during the above sequences, the vendor driver can return
+ * an error code for next read() or write() operation, which will terminate the
+ * loop. The user application should then take the next necessary action, for
+ * example, failing migration or terminating the user application.
+ *
+ * For the user application, data is opaque. The user application should write
+ * data in the same order as the data is received and the data should be of
+ * same transaction size at the source.
+ */
+
+struct vfio_device_migration_info {
+	__u32 device_state;         /* VFIO device state */
+#define VFIO_DEVICE_STATE_STOP      (0)
+#define VFIO_DEVICE_STATE_RUNNING   (1 << 0)
+#define VFIO_DEVICE_STATE_SAVING    (1 << 1)
+#define VFIO_DEVICE_STATE_RESUMING  (1 << 2)
+#define VFIO_DEVICE_STATE_MASK      (VFIO_DEVICE_STATE_RUNNING | \
+				     VFIO_DEVICE_STATE_SAVING |  \
+				     VFIO_DEVICE_STATE_RESUMING)
+
+#define VFIO_DEVICE_STATE_VALID(state) \
+	(state & VFIO_DEVICE_STATE_RESUMING ? \
+	(state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1)
+
+#define VFIO_DEVICE_STATE_IS_ERROR(state) \
+	((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | \
+					      VFIO_DEVICE_STATE_RESUMING))
+
+#define VFIO_DEVICE_STATE_SET_ERROR(state) \
+	((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | \
+					     VFIO_DEVICE_STATE_RESUMING)
+
+	__u32 reserved;
+	__u64 pending_bytes;
+	__u64 data_offset;
+	__u64 data_size;
+};
 
 /*
  * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
@@ -577,6 +807,7 @@ enum {
 
 enum {
 	VFIO_CCW_IO_IRQ_INDEX,
+	VFIO_CCW_CRW_IRQ_INDEX,
 	VFIO_CCW_NUM_IRQS
 };
 
@@ -785,6 +1016,29 @@ struct vfio_iommu_type1_info_cap_iova_range {
 	struct	vfio_iova_range iova_ranges[];
 };
 
+/*
+ * The migration capability allows to report supported features for migration.
+ *
+ * The structures below define version 1 of this capability.
+ *
+ * The existence of this capability indicates that IOMMU kernel driver supports
+ * dirty page logging.
+ *
+ * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
+ * page logging.
+ * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
+ * size in bytes that can be used by user applications when getting the dirty
+ * bitmap.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION  1
+
+struct vfio_iommu_type1_info_cap_migration {
+	struct	vfio_info_cap_header header;
+	__u32	flags;
+	__u64	pgsize_bitmap;
+	__u64	max_dirty_bitmap_size;		/* in bytes */
+};
+
 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
 
 /**
@@ -805,6 +1059,12 @@ struct vfio_iommu_type1_dma_map {
 
 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
 
+struct vfio_bitmap {
+	__u64        pgsize;	/* page size for bitmap in bytes */
+	__u64        size;	/* in bytes */
+	__u64 *data;	/* one bit per page */
+};
+
 /**
  * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
  *							struct vfio_dma_unmap)
@@ -814,12 +1074,23 @@ struct vfio_iommu_type1_dma_map {
  * field.  No guarantee is made to the user that arbitrary unmaps of iova
  * or size different from those used in the original mapping call will
  * succeed.
+ * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
+ * before unmapping IO virtual addresses. When this flag is set, the user must
+ * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
+ * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
+ * A bit in the bitmap represents one page, of user provided page size in
+ * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
+ * indicates that the page at that offset from iova is dirty. A Bitmap of the
+ * pages in the range of unmapped size is returned in the user-provided
+ * vfio_bitmap.data.
  */
 struct vfio_iommu_type1_dma_unmap {
 	__u32	argsz;
 	__u32	flags;
+#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
+	__u8    data[];
 };
 
 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
@@ -831,6 +1102,57 @@ struct vfio_iommu_type1_dma_unmap {
 #define VFIO_IOMMU_ENABLE	_IO(VFIO_TYPE, VFIO_BASE + 15)
 #define VFIO_IOMMU_DISABLE	_IO(VFIO_TYPE, VFIO_BASE + 16)
 
+/**
+ * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
+ *                                     struct vfio_iommu_type1_dirty_bitmap)
+ * IOCTL is used for dirty pages logging.
+ * Caller should set flag depending on which operation to perform, details as
+ * below:
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
+ * the IOMMU driver to log pages that are dirtied or potentially dirtied by
+ * the device; designed to be used when a migration is in progress. Dirty pages
+ * are logged until logging is disabled by user application by calling the IOCTL
+ * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
+ * the IOMMU driver to stop logging dirtied pages.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
+ * returns the dirty pages bitmap for IOMMU container for a given IOVA range.
+ * The user must specify the IOVA range and the pgsize through the structure
+ * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
+ * supports getting a bitmap of the smallest supported pgsize only and can be
+ * modified in future to get a bitmap of any specified supported pgsize. The
+ * user must provide a zeroed memory area for the bitmap memory and specify its
+ * size in bitmap.size. One bit is used to represent one page consecutively
+ * starting from iova offset. The user should provide page size in bitmap.pgsize
+ * field. A bit set in the bitmap indicates that the page at that offset from
+ * iova is dirty. The caller must set argsz to a value including the size of
+ * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
+ * actual bitmap. If dirty pages logging is not enabled, an error will be
+ * returned.
+ *
+ * Only one of the flags _START, _STOP and _GET may be specified at a time.
+ *
+ */
+struct vfio_iommu_type1_dirty_bitmap {
+	__u32        argsz;
+	__u32        flags;
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START	(1 << 0)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP	(1 << 1)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP	(1 << 2)
+	__u8         data[];
+};
+
+struct vfio_iommu_type1_dirty_bitmap_get {
+	__u64              iova;	/* IO virtual address */
+	__u64              size;	/* Size of iova range */
+	struct vfio_bitmap bitmap;
+};
+
+#define VFIO_IOMMU_DIRTY_PAGES             _IO(VFIO_TYPE, VFIO_BASE + 17)
+
 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
 
 /*
diff --git a/linux-headers/linux/vfio_ccw.h b/linux-headers/linux/vfio_ccw.h
index fcc3e69ef5..516496f1d4 100644
--- a/linux-headers/linux/vfio_ccw.h
+++ b/linux-headers/linux/vfio_ccw.h
@@ -34,4 +34,23 @@ struct ccw_cmd_region {
 	__u32 ret_code;
 } __attribute__((packed));
 
+/*
+ * Used for processing commands that read the subchannel-information block
+ * Reading this region triggers a stsch() to hardware
+ * Note: this is controlled by a capability
+ */
+struct ccw_schib_region {
+#define SCHIB_AREA_SIZE 52
+	__u8 schib_area[SCHIB_AREA_SIZE];
+} __attribute__((packed));
+
+/*
+ * Used for returning a Channel Report Word to userspace.
+ * Note: this is controlled by a capability
+ */
+struct ccw_crw_region {
+	__u32 crw;
+	__u32 pad;
+} __attribute__((packed));
+
 #endif
diff --git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h
index 9fe72e4b13..0c2349612e 100644
--- a/linux-headers/linux/vhost.h
+++ b/linux-headers/linux/vhost.h
@@ -15,6 +15,8 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
+#define VHOST_FILE_UNBIND -1
+
 /* ioctls */
 
 #define VHOST_VIRTIO 0xAF
@@ -140,4 +142,6 @@
 /* Get the max ring size. */
 #define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
 
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)
 #endif