Add a phy-num property to the i.MX FEC emulator

We need a solution to use an Ethernet PHY that is not the first device
on the MDIO bus (device 0 on MDIO bus).

As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but
only one MDIO bus on which the 2 related PHY are connected but at unique
addresses.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

3 files changed, 20 insertions, 9 deletions

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index eefedc252d..2c14804041 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -280,12 +280,16 @@ static void imx_phy_reset(IMXFECState *s)
 static uint32_t imx_phy_read(IMXFECState *s, int reg)
 {
     uint32_t val;
+    uint32_t phy = reg / 32;
 
-    if (reg > 31) {
-        /* we only advertise one phy */
+    if (phy != s->phy_num) {
+        qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n",
+                      TYPE_IMX_FEC, __func__, phy);
         return 0;
     }
 
+    reg %= 32;
+
     switch (reg) {
     case 0:     /* Basic Control */
         val = s->phy_control;
@@ -331,20 +335,25 @@ static uint32_t imx_phy_read(IMXFECState *s, int reg)
         break;
     }
 
-    trace_imx_phy_read(val, reg);
+    trace_imx_phy_read(val, phy, reg);
 
     return val;
 }
 
 static void imx_phy_write(IMXFECState *s, int reg, uint32_t val)
 {
-    trace_imx_phy_write(val, reg);
+    uint32_t phy = reg / 32;
 
-    if (reg > 31) {
-        /* we only advertise one phy */
+    if (phy != s->phy_num) {
+        qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n",
+                      TYPE_IMX_FEC, __func__, phy);
         return;
     }
 
+    reg %= 32;
+
+    trace_imx_phy_write(val, phy, reg);
+
     switch (reg) {
     case 0:     /* Basic Control */
         if (val & 0x8000) {
@@ -926,7 +935,7 @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value,
                                                        extract32(value,
                                                                  18, 10)));
         } else {
-            /* This a write operation */
+            /* This is a write operation */
             imx_phy_write(s, extract32(value, 18, 10), extract32(value, 0, 16));
         }
         /* raise the interrupt as the PHY operation is done */
@@ -1315,6 +1324,7 @@ static void imx_eth_realize(DeviceState *dev, Error **errp)
 static Property imx_eth_properties[] = {
     DEFINE_NIC_PROPERTIES(IMXFECState, conf),
     DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1),
+    DEFINE_PROP_UINT32("phy-num", IMXFECState, phy_num, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/net/trace-events b/hw/net/trace-events
index e6875c4c0f..5db45456d9 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -413,8 +413,8 @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries"
 i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION"
 
 # imx_fec.c
-imx_phy_read(uint32_t val, int reg) "0x%04"PRIx32" <= reg[%d]"
-imx_phy_write(uint32_t val, int reg) "0x%04"PRIx32" => reg[%d]"
+imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]"
+imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]"
 imx_phy_update_link(const char *s) "%s"
 imx_phy_reset(void) ""
 imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x"
diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h
index 7b3faa4019..9f03034b89 100644
--- a/include/hw/net/imx_fec.h
+++ b/include/hw/net/imx_fec.h
@@ -268,6 +268,7 @@ typedef struct IMXFECState {
     uint32_t phy_advertise;
     uint32_t phy_int;
     uint32_t phy_int_mask;
+    uint32_t phy_num;
 
     bool is_fec;