| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Enable epoll tests on Android, because they are passing.
|
|
This was an oversight from PR #1511
|
|
parking_lot provides synchronization primitives which aren't
poisoned on panic. This makes it easier to determine which tests
are failing, as a test failure no longer causes all subsequent tests
using that mutex to fail.
|
|
Ensure file descriptors are nonnegative and less than `FD_SETSIZE`.
(Fixes #1572.)
|
|
This was an oversight from #1306.
Reported-by: @ocadaruma
|
|
And this time, start running Clippy in CI
|
|
1496: Rework UnixAddr to fix soundness issues r=asomers a=coolreader18
Fixes #1494
I went with making `sun_path` always nul-terminated since that just seems to make things easier, since (at least according to linux man pages) `sockaddr_un`s returned by the kernel will always be nul-terminated.
Co-authored-by: Noa <33094578+coolreader18@users.noreply.github.com>
|
|
|
|
1509: Allow Android to use timerfd r=asomers a=rtzoeller
This is a continuation of #1336 which also enables the timerfd tests.
```
running 3 tests
test sys::test_timerfd::test_timerfd_unset ... ok
test sys::test_timerfd::test_timerfd_oneshot ... ok
test sys::test_timerfd::test_timerfd_interval ... ok
```
1515: Add IP_TTL/IPV6_UNICAST_HOPS SockOpts r=asomers a=cemeyer
Test: `cargo test --test test test_ttl_opts`
Co-authored-by: Ryan Zoeller <rtzoeller@rtzoeller.com>
Co-authored-by: Conrad Meyer <cem@FreeBSD.org>
|
|
Test: `cargo test --test test test_ttl_opts`
|
|
|
|
1317: test_af_alg_aead waits indefinitely r=asomers a=ritzk
Starting with linux kernel 4.9, the crypto interface changed slightly such that the authentication tag memory is only needed in the output buffer for encryption and in the input buffer for decryption. Thus, we have fewer bytes to read than the buffer size. Do not block on read.
alternatively, we can adjust the decrypted buffer size based on kernel version ( ">= 4.9") to not include auth_size .
```
if kernel_version >= "4.9":
let mut decrypted = vec![0u8; payload_len + (assoc_size as usize) ];
```
before
```
test sys::test_socket::test_af_alg_aead ... test sys::test_socket::test_af_alg_aead has been running for over 60 seconds
```
after
```
test sys::test_socket::test_af_alg_aead ... ok
```
Co-authored-by: Ritesh Khadgaray <khadgaray@gmail.com>
|
|
Setting these options enables receiving errors, such as ICMP errors from
the network, via `recvmsg()` with `MSG_ERRQUEUE`.
Adds new `Ipv{4,6}RecvErr` variants to `ControlMessageOwned`. These
control messages are produced when `Ipv4RecvErr` or `Ipv6RecvErr`
options are enabled on a raw or datagram socket.
New tests for the functionality can be run with `cargo test --test test
test_recverr`.
This commit builds on an earlier draft of the functionality authored by
Matthew McPherrin <git@mcpherrin.ca>.
|
|
|
|
|
|
Co-authored-by: zachoverflow <zach@zachjohnson.net>
|
|
|
|
1506: Test Linux aarch64 on real aarch64 hardware. r=asomers a=asomers
Co-authored-by: Alan Somers <asomers@gmail.com>
|
|
Apparently AWS Graviton containers don't support it. socket() retunrs
EAFNOSUPPORT in that environment.
Also, be more selective about skipping tests under QEMU
Instead of skipping them on architectures where we happen to use QEMU,
only skip them when QEMU is actually being used.
|
|
|
|
|
|
Fixes #1479
|
|
1482: Add support for LOCAL_PEER_CRED r=asomers a=asomers
On FreeBSD and its derivatives, this socket option gets the credentials
of the connected peer.
Co-authored-by: Alan Somers <asomers@gmail.com>
|
|
On FreeBSD and its derivatives, this socket option gets the credentials
of the connected peer.
|
|
|
|
|
|
This PR implements support of RXQ_OVFL flag and parsing ControlMessage
to get the packet drop counter of UDP socket.
|
|
Now that Nix's weird error types are eliminated, there's no reason not
to simply use Errno as the Error type.
|
|
For many of Nix's consumers it be convenient to easily convert a Nix
error into a std::io::Error. That's currently not possible because of
the InvalidPath, InvalidUtf8, and UnsupportedOperation types that have
no equivalent in std::io::Error.
However, very few of Nix's public APIs actually return those unusual
errors. So a more useful API would be for Nix's standard error type to
implement Into<std::io::Error>.
This commit makes Error a simple NewType around Errno. For most
functions it's a drop-in replacement. There are only three exceptions:
* clearenv now returns a bespoke error type. It was the only Nix
function whose error couldn't be cleanly mapped onto an Errno.
* sys::signal::signal now returns Error(Errno::ENOTSUP) instead of
Error::UnsupportedOperation when the user passes an incompatible
argument to `handler`.
* When a NixPath exceeds PATH_MAX, it will now return
Error(Errno::ENAMETOOLONG) instead of Error::InvalidPath.
In the latter two cases there is now some abiguity about whether the
error code was generated by Nix or by the OS. But I think the ambiguity
is worth it for the sake of being able to implement Into<io::Error>.
This commit also introduces Error::Sys() as a migration aid. Previously
that as an enum variant. Now it's a function, but it will work in many
of the same contexts as the original.
Fixes #1155
|
|
|
|
* Fix race conditions in the tests. Two tests were grabbing a mutex but
immediately dropping it. Thank you, Clippy.
* Remove vestigial Windows support. Remove some code added to support
Windows in 2015. Nix is no longer intended to ever run on Windows.
* Various other minor Clippy lints.
|
|
* libc::aiocb must not be moved while the kernel has a pointer to it.
This change enforces that requirement by using std::pin.
* Split LioCbBuilder out of LioCb. struct LioCb relied on the
(incorrect) assumption that a Vec's elements have a stable location in
memory. That's not true; they can be moved during Vec::push. The
solution is to use a Vec in the new Builder struct, but finalize it to
a boxed slice (which doesn't support push) before allowing it to be
submitted to the kernel.
* Eliminate owned buffer types. mio-aio no longer uses owned buffers
with nix::aio. There's little need for it in the world of
async/await. I'm not aware of any other consumers. This
substantially simplifies the code.
|
|
1402: Support TIMESTAMPNS r=asomers a=WiSaGaN
This adds support of linux TIMESTAMPNS.
The code is mostly copied paste from https://github.com/nix-rust/nix/pull/663
Co-authored-by: Lu, Wangshan <wisagan@gmail.com>
|
|
|
|
Travis didn't compile check tests on platforms that couldn't run tests
in CI, so they bitrotted. Let's see how bad they are.
Most annoyingly, 32-bit Android defines mode_t as 16 bits, but
stat.st_mode as 32-bits.
|
|
This reverts commit c0783e7f8d55a7725179afc1b3c8eeae932d228c.
Now the test should work correctly, so we can re-enable it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Starting from Linux 5.6, VMADDR_CID_LOCAL is supported to do local
communication (loopback device).
Before Linux 5.6 it was called VMADDR_CID_RESERVED and was not
supported, so we could expect an EADDRNOTAVAIL, but now this address
is supported and handled by the 'vsock_loopback' kernel module loaded
automatically if no other vsock transports are loaded.
Issue #1310
Issue #1403
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Co-authored-by: Dominik Hassler <hadfl@omnios.org>
Co-authored-by: Joshua M. Clulow <josh@sysmgr.org>
|
|
Issue #1403
|
|
This eliminates some duplicate dependencies
|
|
Based on
https://github.com/nix-rust/nix/issues/1384#issuecomment-774708486
|
|
Allow nix to compile on Fuchsia by conditionally avoiding libc
functionality that does not exist for Fuchsia.
|
|
On Cirrus-CI, this test frequently fails with EINVAL. The error goes
away if I add a line of debugging, so it's probably a timing issue. But
I can't debug it myself.
Issue #1361
|
|
On OSX, this test has begun to fail in CI on OSX. Presumably it's because
aio_suspend was getting interrupted by a signal.
|
|
Travis has been super-slow lately (> 6 hours per build). Cirrus is much
faster: about 20 minutes. Cirrus also has slightly better test
coverage, mainly because it doesn't use SECCOMP.
Also,
* Fix the Redox CI build. The old Travis configuration didn't actually
build for Redox, so we never noticed that Redox can't be built with a
stable compiler. Thanks to @coolreader18 for finding this.
* Disable the udp_offload tests on cross-tested platforms. These tests
are failing with ENOPROTOOPT in Cirrus-CI. I suspect it's due to a
lack of support in QEMU. These tests were skipped on Travis because
its kernel was too old.
* Fix require_kernel_version on Cirrus-CI. Cirrus reports the Linux
kernel version as 4.19.112+, which the semver crate can't handle.
* Fix test_setfsuid on Cirrus. When run on Cirrus, it seems like the
file in /tmp gets deleted as soon as it's closed. Probably an
overzealous temporary file cleaner. Use /var/tmp, because no
temporary file cleaner should run in there.
* Skip mount tests on Cirrus. They fail for an unknown reason.
Issue #1351
* Skip the AF_ALG tests on Cirrus-CI
Issue #1352
|
|
1345: Disable test-aio-drop in GNU environments r=asomers a=asomers
This test occasionally fails in Travis on x86_64-unknown-linux-gnu. The
failure takes the form of the test executable receiving a random signal.
Sometimes SIGHUP, sometimes SIGKILL, etc. I think this must be a bug in
glibc, even though I can't reproduce it in my development environment.
But it interferes with CI too much to leave enabled.
Co-authored-by: Alan Somers <asomers@gmail.com>
|
|
This test occasionally fails in Travis on x86_64-unknown-linux-gnu. The
failure takes the form of the test executable receiving a random signal.
Sometimes SIGHUP, sometimes SIGKILL, etc. I think this must be a bug in
glibc, even though I can't reproduce it in my development environment.
But it interferes with CI too much to leave enabled.
|
|
There were two problems discovered with the `recvmmsg(2)` implementation
that this changeset attempts to fix:
1. As mentioned in nix-rust/issues/1325, `recvmmsg(2)` can return fewer
messages than requested, and
2. Passing the return value of `recvmmsg(2)` as the number of bytes in
the messages received is incorrect.
This changeset incorporates the proposed fix from nix-rust/issues/1325,
as well as passing the correct value (`mmsghdr.msg_len`) for the number
of bytes in a given message.
|
