# Debian GNU/Linux Installation Guide
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
"POT-Creation-Date: 2006-01-31 23:11+0000\n"
"PO-Revision-Date: 2005-07-18 00:22+0800\n"
"Last-Translator: Jhang, Jia-Wei<dreamcryer@gmail.com>\n"
"Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#: boot-new.xml:5
#, no-c-format
msgid "Booting Into Your New Debian System"
msgstr "啟動新 Debian 系統"

#. Tag: title
#: boot-new.xml:7
#, no-c-format
msgid "The Moment of Truth"
msgstr "關鍵時刻"

#. Tag: para
#: boot-new.xml:8
#, no-c-format
msgid ""
"Your system's first boot on its own power is what electrical engineers call "
"the <quote>smoke test</quote>."
msgstr ""
"當您的系統首次自行啟動，這在電子工程師圈子裡面稱為 <quote>冒煙測試</quote>。"

#. Tag: para
#: boot-new.xml:13
#, fuzzy, no-c-format
msgid ""
"If you are booting directly into Debian, and the system doesn't start up, "
"either use your original installation boot media, or insert the custom boot "
"floppy if you have one, and reset your system. This way, you will probably "
"need to add some boot arguments like <userinput>root=<replaceable>root</"
"replaceable></userinput>, where <replaceable>root</replaceable> is your root "
"partition, such as <filename>/dev/sda1</filename>. Alternatively, see <xref "
"linkend=\"rescue\"/> for instructions on using the installer's built-in "
"rescue mode."
msgstr ""
"如果您直接從 Debian 啟動，但系統沒有起來，那麼請使用原來的安裝媒介，或是使用"
"您自製的開機磁片，然後重新啟動系統。這種情況下，您也許需要添加一些啟動參數，"
"像 <userinput>root=<replaceable>root</replaceable></userinput>，其中 "
"<replaceable>root</replaceable> 是您的根分割區，例如 <filename>/dev/sda1</"
"filename>。<phrase condition=\"etch\"> 或者，請參閱 <xref linkend=\"rescue\"/"
">以得知安裝程式內建的救援模式中的指令。</phrase>"

#. Tag: title
#: boot-new.xml:27
#, no-c-format
msgid "BVME 6000 Booting"
msgstr "啟動 BVME 6000"

#. Tag: para
#: boot-new.xml:28
#, no-c-format
msgid ""
"If you have just performed a diskless install on a BVM or Motorola VMEbus "
"machine: once the system has loaded the <command>tftplilo</command> program "
"from the TFTP server, from the <prompt>LILO Boot:</prompt> prompt enter one "
"of:"
msgstr ""
"如果您採用無硬碟方式安裝到 BVM 或 Motorola VMEbus 機器，一旦系統從 TFTP 伺服"
"器載入 <command>tftplilo</command> 程式，在 <prompt>LILO Boot:</prompt> 提示"
"符下輸入："

#. Tag: para
#: boot-new.xml:36
#, no-c-format
msgid ""
"<userinput>b6000</userinput> followed by &enterkey; to boot a BVME 4000/6000"
msgstr "<userinput>b6000</userinput> 然後按 &enterkey; 啟動 BVME 4000/6000"

#. Tag: para
#: boot-new.xml:41
#, no-c-format
msgid "<userinput>b162</userinput> followed by &enterkey; to boot an MVME162"
msgstr "<userinput>b162</userinput> 然後按 &enterkey; 啟動 MVME162"

#. Tag: para
#: boot-new.xml:46
#, no-c-format
msgid ""
"<userinput>b167</userinput> followed by &enterkey; to boot an MVME166/167"
msgstr "<userinput>b167</userinput> 然後按 &enterkey; 啟動 MVME166/167"

#. Tag: title
#: boot-new.xml:58
#, no-c-format
msgid "Macintosh Booting"
msgstr "啟動 Macintosh"

#. Tag: para
#: boot-new.xml:60
#, no-c-format
msgid ""
"Go to the directory containing the installation files and start up the "
"<command>Penguin</command> booter, holding down the <keycap>command</keycap> "
"key. Go to the <userinput>Settings</userinput> dialogue (<keycombo> "
"<keycap>command</keycap> <keycap>T</keycap> </keycombo>), and locate the "
"kernel options line which should look like <userinput>root=/dev/ram "
"video=font:VGA8x16</userinput> or similar."
msgstr ""
"進入包含安裝檔案的目錄，然後啟動 <command>Penguin</command> boot-loader，按"
"住 <keycap>command</keycap> 鍵。進入<userinput>設定</userinput>對話框 "
"(<keycombo> <keycap>command</keycap> <keycap>T</keycap> </keycombo>)，然後找"
"到核心選項那行，如 <userinput>root=/dev/ram video=font:VGA8x16</userinput> 或"
"類似提示。"

#. Tag: para
#: boot-new.xml:70
#, no-c-format
msgid ""
"You need to change the entry to <userinput>root=/dev/<replaceable>yyyy</"
"replaceable></userinput>. Replace the <replaceable>yyyy</replaceable> with "
"the Linux name of the partition onto which you installed the system (e.g. "
"<filename>/dev/sda1</filename>); you wrote this down earlier. The "
"<userinput>video=font:VGA8x8</userinput> is recommended especially for users "
"with tiny screens. The kernel would pick a prettier (6x11) font but the "
"console driver for this font can hang the machine, so using 8x16 or 8x8 is "
"safer at this stage. You can change this at any time."
msgstr ""
"您需要修改該項目為 <userinput>root=/dev/<replaceable>yyyy</replaceable></"
"userinput>。替換 <replaceable>yyyy</replaceable> 為您安裝分割區的 Linux 名稱 "
"(例如，<filename>/dev/sda1</filename>);也就是之前記下的內容。"
"<userinput>video=font:VGA8x8</userinput> 特別建議小螢幕的使用者使用。核心會選"
"擇較美觀的 (6x11) 字體，但該字體可能會造成控制台驅動程式當機，因此使用 8x16 "
"或 8x8 對於該階段較安全。您可以隨時修改它。"

#. Tag: para
#: boot-new.xml:83
#, no-c-format
msgid ""
"If you don't want to start GNU/Linux immediately each time you start, "
"uncheck the <userinput>Auto Boot</userinput> option. Save your settings in "
"the <filename>Prefs</filename> file using the <userinput>Save Settings As "
"Default</userinput> option."
msgstr ""
"如果您不想每次開機時立即啟動 GNU/Linux，移除 <userinput>Auto Boot</"
"userinput> 選項。儲存設定到 <filename>Prefs</filename> 檔案，使用 "
"<userinput>Save Settings As Default</userinput> 選項。"

#. Tag: para
#: boot-new.xml:90
#, no-c-format
msgid ""
"Now select <userinput>Boot Now</userinput> (<keycombo> <keycap>command</"
"keycap> <keycap>B</keycap> </keycombo>) to start your freshly installed GNU/"
"Linux instead of the RAMdisk installer system."
msgstr ""
"現在選擇 <userinput>Boot Now</userinput> (<keycombo> <keycap>command</"
"keycap> <keycap>B</keycap> </keycombo>) 以啟動新安裝的 GNU/Linux，而不是 "
"RAMdisk 安裝系統。"

#. Tag: para
#: boot-new.xml:96
#, no-c-format
msgid ""
"Debian should boot, and you should see the same messages as when you first "
"booted the installation system, followed by some new messages."
msgstr "Debian 應該啟動，然後您將看到與安裝系統同樣的訊息，跟著是一些新訊息。"

#. Tag: title
#: boot-new.xml:106
#, no-c-format
msgid "OldWorld PowerMacs"
msgstr "OldWorld PowerMacs"

#. Tag: para
#: boot-new.xml:107
#, no-c-format
msgid ""
"If the machine fails to boot after completing the installation, and stops "
"with a <prompt>boot:</prompt> prompt, try typing <userinput>Linux</"
"userinput> followed by &enterkey;. (The default boot configuration in "
"<filename>quik.conf</filename> is labeled Linux). The labels defined in "
"<filename>quik.conf</filename> will be displayed if you press the "
"<keycap>Tab</keycap> key at the <prompt>boot:</prompt> prompt. You can also "
"try booting back into the installer, and editing the <filename>/target/etc/"
"quik.conf</filename> placed there by the <guimenuitem>Install Quik on a Hard "
"Disk</guimenuitem> step. Clues for dealing with <command>quik</command> are "
"available at <ulink url=\"&url-powerpc-quik-faq;\"></ulink>."
msgstr ""
"如果機器在完成安裝後啟動失敗，並停在 <prompt>boot:</prompt> 提示符號，試著鍵"
"入 <userinput>Linux</userinput> 然後按 &enterkey;。(<filename>quik.conf</"
"filename> 中預設的啟動設定標籤是 Linux)。如果您在 <prompt>boot:</prompt> 提示"
"符號下按 <keycap>Tab</keycap> 鍵，定義在 <filename>quik.conf</filename> 中的"
"標籤將會被顯示出來。您也可以重新啟動安裝程式，並編輯 <filename>/target/etc/"
"quik.conf</filename> 然後回到 <guimenuitem>安裝 Quik 到硬碟</guimenuitem> 步"
"驟。處理 <command>quik</command> 的細節位於 <ulink url=\"&url-powerpc-quik-"
"faq;\"></ulink>。"

#. Tag: para
#: boot-new.xml:121
#, no-c-format
msgid ""
"To boot back into MacOS without resetting the nvram, type <userinput>bye</"
"userinput> at the OpenFirmware prompt (assuming MacOS has not been removed "
"from the machine). To obtain an OpenFirmware prompt, hold down the "
"<keycombo> <keycap>command</keycap> <keycap>option</keycap> <keycap>o</"
"keycap> <keycap>f</keycap> </keycombo> keys while cold booting the machine. "
"If you need to reset the OpenFirmware nvram changes to the MacOS default in "
"order to boot back to MacOS, hold down the <keycombo> <keycap>command</"
"keycap> <keycap>option</keycap> <keycap>p</keycap> <keycap>r</keycap> </"
"keycombo> keys while cold booting the machine."
msgstr ""
"想要啟動回 MacOS 而不重設 nvram，請在 OpenFirmware 提示符號下鍵入 "
"<userinput>bye</userinput> (假設 MacOS 沒有從機器裡面刪除)。要顯示 "
"OpenFirmware 提示符號，按住 <keycombo> <keycap>command</keycap> "
"<keycap>option</keycap> <keycap>o</keycap> <keycap>f</keycap> </keycombo> "
"鍵，在啟動機器的時候。如果您需要重新設定 OpenFirmware nvram 預設以 MacOS 啟動"
"回到 MacOS，在開機的時候按下 <keycombo> <keycap>command</keycap> "
"<keycap>option</keycap> <keycap>p</keycap> <keycap>r</keycap> </keycombo> "
"鍵。"

#. Tag: para
#: boot-new.xml:134
#, no-c-format
msgid ""
"If you use <command>BootX</command> to boot into the installed system, just "
"select your desired kernel in the <filename>Linux Kernels</filename> folder, "
"un-choose the ramdisk option, and add a root device corresponding to your "
"installation; e.g. <userinput>/dev/hda8</userinput>."
msgstr ""
"假如您使用 <command>BootX</command> 啟動安裝好的系統，只需選擇位於 "
"<filename>Linux Kernels</filename> 目錄中需要的核心，去掉 ramdisk 選項，並加"
"上與您的系統相對應的根設備﹔如 <userinput>/dev/hda8</userinput>。"

#. Tag: title
#: boot-new.xml:146
#, no-c-format
msgid "NewWorld PowerMacs"
msgstr "NewWorld PowerMacs"

#. Tag: para
#: boot-new.xml:147
#, no-c-format
msgid ""
"On G4 machines and iBooks, you can hold down the <keycap>option</keycap> key "
"and get a graphical screen with a button for each bootable OS, &debian; will "
"be a button with a small penguin icon."
msgstr ""
"在 G4 機器和 iBooks 上，您可以按住 <keycap>option</keycap> 鍵，進入一個圖形介"
"面，每個可以啟動的系統會對應到一個圖示，&debian; 將是一個企鵝的圖示。"

#. Tag: para
#: boot-new.xml:154
#, no-c-format
msgid ""
"If you kept MacOS and at some point it changes the OpenFirmware <envar>boot-"
"device</envar> variable you should reset OpenFirmware to its default "
"configuration. To do this hold down the <keycombo> <keycap>command</keycap> "
"<keycap>option</keycap> <keycap>p</keycap> <keycap>r</keycap> </keycombo> "
"keys while cold booting the machine."
msgstr ""
"如果您保留 MacOS，有時候它會修改 OpenFirmware <envar>boot-device</envar> 變"
"數，您應該重設 OpenFirmware 到它的預設設定。請在啟動機器的時候按住 "
"<keycombo> <keycap>command</keycap> <keycap>option</keycap> <keycap>p</"
"keycap> <keycap>r</keycap> </keycombo> 鍵。"

#. Tag: para
#: boot-new.xml:162
#, no-c-format
msgid ""
"The labels defined in <filename>yaboot.conf</filename> will be displayed if "
"you press the <keycap>Tab</keycap> key at the <prompt>boot:</prompt> prompt."
msgstr ""
"當您在 <prompt>boot:</prompt> 提示符號下按下 <keycap>Tab</keycap> 鍵時，定義"
"在 <filename>yaboot.conf</filename> 裡的標籤會顯示出來。"

#. Tag: para
#: boot-new.xml:168
#, no-c-format
msgid ""
"Resetting OpenFirmware on G3 or G4 hardware will cause it to boot &debian; "
"by default (if you correctly partitioned and placed the Apple_Bootstrap "
"partition first). If you have &debian; on a SCSI disk and MacOS on an IDE "
"disk this may not work and you will have to enter OpenFirmware and set the "
"<envar>boot-device</envar> variable, <command>ybin</command> normally does "
"this automatically."
msgstr ""
"重設 G3 或 G4 硬體上的 OpenFirmware 將導致預設啟動 &debian; (假設您正確分割"
"區， 並將 Apple_Bootstrap 分割區放在首位)。如果您將 &debian; 放在 SCSI 磁碟，"
"而 MacOS 位於 IDE 磁碟，這也許不會運作，而您不得不進入 OpenFirmware 並設定 "
"<envar>boot-device</envar> 變數，<command>ybin</command> 通常會自動完成這個動"
"作。"

#. Tag: para
#: boot-new.xml:177
#, no-c-format
msgid ""
"After you boot &debian; for the first time you can add any additional "
"options you desire (such as dual boot options) to <filename>/etc/yaboot."
"conf</filename> and run <command>ybin</command> to update your boot "
"partition with the changed configuration. Please read the <ulink url=\"&url-"
"powerpc-yaboot-faq;\">yaboot HOWTO</ulink> for more information."
msgstr ""
"在首次啟動 &debian; 之後，您可以添加額外選項 (如雙啟動選項) 到 <filename>/"
"etc/yaboot.conf</filename> 並執行 <command>ybin</command> 以更新修改過的設"
"定。請參閱 <ulink url=\"&url-powerpc-yaboot-faq;\">yaboot HOWTO</ulink> 以了"
"解更多資訊。"

#. Tag: title
#: boot-new.xml:191
#, no-c-format
msgid "Log In"
msgstr "登入"

#. Tag: para
#: boot-new.xml:193
#, fuzzy, no-c-format
msgid ""
"Once your system boots, you'll be presented with the login prompt. Log in "
"using the personal login and password you selected during the installation "
"process. Your system is now ready to use."
msgstr ""
"安裝完軟體套件以後，您會看到登入提示符號。使用您選擇的登入使用者名稱和密碼。"
"您的系統就能使用了。"

#. Tag: para
#: boot-new.xml:199
#, no-c-format
msgid ""
"If you are a new user, you may want to explore the documentation which is "
"already installed on your system as you start to use it. There are currently "
"several documentation systems, work is proceeding on integrating the "
"different types of documentation. Here are a few starting points."
msgstr ""
"如果您是新使用者，您也許希望瀏覽已經安裝到系統上的文件。目前有多個文件系統，"
"由不同類型的文件組成。接下來將做簡略介紹。"

#. Tag: para
#: boot-new.xml:207
#, no-c-format
msgid ""
"Documentation accompanying programs you have installed is in <filename>/usr/"
"share/doc/</filename>, under a subdirectory named after the program. For "
"example, the APT User's Guide for using <command>apt</command> to install "
"other programs on your system, is located in <filename>/usr/share/doc/apt/"
"guide.html/index.html</filename>."
msgstr ""
"伴隨程式的文件安裝在 <filename>/usr/share/doc/</filename> 之下，並存在於以程"
"式名稱命名的子目錄下。例如，APT 使用者指南是關於使用 <command>apt</command> "
"安裝其他程式的說明，位於 <filename>/usr/share/doc/apt/guide.html/index.html</"
"filename>。"

#. Tag: para
#: boot-new.xml:216
#, no-c-format
msgid ""
"In addition, there are some special folders within the <filename>/usr/share/"
"doc/</filename> hierarchy. Linux HOWTOs are installed in <emphasis>.gz</"
"emphasis> format, in <filename>/usr/share/doc/HOWTO/en-txt/</filename>. "
"After installing <command>dhelp</command> you will find a browse-able index "
"of documentation in <filename>/usr/share/doc/HTML/index.html</filename>."
msgstr ""
"另外，還有一些特殊的目錄位於 <filename>/usr/share/doc/</filename> 目錄結構"
"裡。Linux HOWTOs 以 <emphasis>.gz</emphasis> 格式安裝，放在 <filename>/usr/"
"share/doc/HOWTO/en-txt/</filename>。安裝 <command>dhelp</command>之後，可以瀏"
"覽 <filename>/usr/share/doc/HTML/index.html</filename> 文件索引。"

#. Tag: para
#: boot-new.xml:226
#, no-c-format
msgid ""
"One easy way to view these documents is to <userinput>cd /usr/share/doc/</"
"userinput>, and type <userinput>lynx</userinput> followed by a space and a "
"dot (the dot stands for the current directory)."
msgstr ""
"一種查看文件的簡易方法是 <userinput>cd /usr/share/doc/</userinput>，然後鍵入 "
"<userinput>lynx</userinput> 後面加上空格和一個點 (點是指目前目錄)。"

#. Tag: para
#: boot-new.xml:233
#, no-c-format
msgid ""
"You can also type <userinput>info <replaceable>command</replaceable></"
"userinput> or <userinput>man <replaceable>command</replaceable></userinput> "
"to see documentation on most commands available at the command prompt. "
"Typing <userinput>help</userinput> will display help on shell commands. And "
"typing a command followed by <userinput>--help</userinput> will usually "
"display a short summary of the command's usage. If a command's results "
"scroll past the top of the screen, type <userinput>| more</userinput> after "
"the command to cause the results to pause before scrolling past the top of "
"the screen. To see a list of all commands available which begin with a "
"certain letter, type the letter and then two tabs."
msgstr ""
"您也可以鍵入 <userinput>info <replaceable>command</replaceable></userinput> "
"或 <userinput>man <replaceable>command</replaceable></userinput> 在去查看大多"
"數命令列下的指令。鍵入 <userinput>help</userinput> 將顯示介殼指令的說明。鍵入"
"指令後加上 <userinput>--help</userinput> 通常會顯示指令用法的簡短摘要。如果指"
"令的結果捲動超出螢幕頂端，鍵入 <userinput>| more</userinput> 於指令之後，可以"
"讓輸出暫停在頂端螢幕。查看某字母開始的所有可用指令，鍵入該字母，再按兩次 tab "
"鍵。"

#. Tag: para
#: boot-new.xml:248
#, no-c-format
msgid ""
"For a more complete introduction to Debian and GNU/Linux, see <filename>/usr/"
"share/doc/debian-guide/html/noframes/index.html</filename>."
msgstr ""
"想要多瞭解 Debian 和 GNU/Linux，請參閱 <filename>/usr/share/doc/debian-guide/"
"html/noframes/index.html</filename>。"

#~ msgid "Debian Post-Boot (Base) Configuration"
#~ msgstr "Debian 啟動後之 (基本) 設置"

#~ msgid ""
#~ "After booting, you will be prompted to complete the configuration of your "
#~ "basic system, and then to select what additional packages you wish to "
#~ "install. The application which guides you through this process is called "
#~ "<classname>base-config</classname>. Its concept is very similar to the &d-"
#~ "i; from the first stage. Indeed, <classname>base-config</classname> "
#~ "consists of a number of specialized components, where each component "
#~ "handles one configuration task, contains <quote>hidden menu in the "
#~ "background</quote> and also uses the same navigation system."
#~ msgstr ""
#~ "啟動之後，您將被提示去完成基本系統的設定，然後選擇您希望安裝的額外軟體套"
#~ "件。指引您完成此過程的應用程式稱為 <classname>base-config</classname>。它"
#~ "的概念類似 &d-i; 的第一階段。事實上，<classname>base-config</classname> 由"
#~ "一些特殊的元件組成，每個元件完成一項設定任務，包括<quote>在後台隱藏選單</"
#~ "quote>並使用同樣的瀏覽系統。"

#~ msgid ""
#~ "If you wish to re-run the <classname>base-config</classname> at any point "
#~ "after installation is complete, as root run <userinput>base-config</"
#~ "userinput>."
#~ msgstr ""
#~ "如果您希望在完成安裝之後重新執行 <classname>base-config</classname>，請以 "
#~ "root 身份執行 <userinput>base-config</userinput>。"

#~ msgid "Configuring Your Time Zone"
#~ msgstr "設定您的時區"

#~ msgid ""
#~ "After a welcome screen, you will be prompted to configure your time zone. "
#~ "First select whether the hardware clock of your system is set to local "
#~ "time or Greenwich Mean Time (GMT or UTC). The time displayed in the "
#~ "dialog may help you decide on the correct option. <phrase arch=\"m68k;"
#~ "powerpc\">Macintosh hardware clocks are normally set to local time. If "
#~ "you want to dual-boot, select local time instead of GMT.</phrase> <phrase "
#~ "arch=\"i386\">Systems that (also) run Dos or Windows are normally set to "
#~ "local time. If you want to dual-boot, select local time instead of GMT.</"
#~ "phrase>"
#~ msgstr ""
#~ "歡迎畫面之後，您將看到要求設定時區的提示。首先決定系統硬體時鐘為本地還是格"
#~ "林威治時間 (GMT或UTC)。對話框裡面顯示的時間可以幫您做出正確的選擇。 "
#~ "<phrase arch=\"m68k;powerpc\">Macintosh 硬體時鐘通常設為本地時間。如果您想"
#~ "多重開機，請選擇本地時間而非 GMT。</phrase> <phrase arch=\"i386\"> 仍然) "
#~ "運行 Dos 或 Windows 的系統通常設為本地時間。如果您想多重開機，選擇本地時間"
#~ "而非 GMT。</phrase>"

#~ msgid ""
#~ "Depending on the location selected at the beginning of the installation "
#~ "process, you will next be shown either a single timezone or a list of "
#~ "timezones relevant for that location. If a single timezone is shown, "
#~ "choose <guibutton>Yes</guibutton> to confirm or choose <guibutton>No</"
#~ "guibutton> to select from the full list of timezones. If a list is shown, "
#~ "select your timezone from the list, or select Other for the full list."
#~ msgstr ""
#~ "基於安裝開始時選擇的地理位置，您將看到系統只列出與該位置相關的單一或者有限"
#~ "的時區列表。如果只列出一個時區，選擇<guibutton>是</guibutton>確認或者選擇"
#~ "<guibutton>否</guibutton> 從完整列表中去選擇。當列表顯示出來，從中選擇您的"
#~ "時區，或者選擇其他以列出完整列表。"

#~ msgid "Setting Up Users And Passwords"
#~ msgstr "設定使用者和密碼"

#~ msgid "Set the Root Password"
#~ msgstr "設定 root 密碼"

#~ msgid ""
#~ "The <emphasis>root</emphasis> account is also called the <emphasis>super-"
#~ "user</emphasis>; it is a login that bypasses all security protection on "
#~ "your system. The root account should only be used to perform system "
#~ "administration, and only used for as short a time as possible."
#~ msgstr ""
#~ "<emphasis>root</emphasis> 帳戶也被稱為<emphasis>超級使用者</emphasis>。系"
#~ "統中的所有安全防護措施對以超級使用者身份登陸者都是無效的。root 帳戶應該僅"
#~ "用來進行系統管理，而且使用時間應該盡可能短。"

#~ msgid ""
#~ "Any password you create should contain at least 6 characters, and should "
#~ "contain both upper- and lower-case characters, as well as punctuation "
#~ "characters. Take extra care when setting your root password, since it is "
#~ "such a powerful account. Avoid dictionary words or use of any personal "
#~ "information which could be guessed."
#~ msgstr ""
#~ "您所建立的任何密碼都應該包含至少 6 個字元，同時包含大小寫字母，並且最好帶"
#~ "有標點符號等特殊字元。因為超級使用者具有最高權限，因此在您設定 root 密碼時"
#~ "尤其要小心。請避免採用能夠在字典中查到的單詞或者很容易猜測的個人資訊。"

#~ msgid ""
#~ "If anyone ever tells you they need your root password, be extremely wary. "
#~ "You should normally never give your root password out, unless you are "
#~ "administering a machine with more than one system administrator."
#~ msgstr ""
#~ "如果他人向您索取您的 root 密碼，您也需要特別謹慎。除非您所管理的系統有多位"
#~ "管理員，否則您通常不應該將超級使用者密碼交給別人。"

#~ msgid "Create an Ordinary User"
#~ msgstr "建立一個普通使用者"

#~ msgid ""
#~ "The system will ask you whether you wish to create an ordinary user "
#~ "account at this point. This account should be your main personal log-in. "
#~ "You should <emphasis>not</emphasis> use the root account for daily use or "
#~ "as your personal login."
#~ msgstr ""
#~ "系統會詢問您現在是否希望建立一個普通帳戶。您將使用該帳戶進行日常登陸操作。"
#~ "切記，平時<emphasis>不要</emphasis>使用 root 帳戶登陸或者將其作為個人帳號"
#~ "使用。"

#~ msgid ""
#~ "Why not? Well, one reason to avoid using root's privileges is that it is "
#~ "very easy to do irreparable damage as root. Another reason is that you "
#~ "might be tricked into running a <emphasis>Trojan-horse</emphasis> program "
#~ "&mdash; that is a program that takes advantage of your super-user powers "
#~ "to compromise the security of your system behind your back. Any good book "
#~ "on Unix system administration will cover this topic in more detail "
#~ "&mdash; consider reading one if it is new to you."
#~ msgstr ""
#~ "為什麼呢？避免使用 root 特權帳戶的一個原因是，它很容易對系統造成無法挽回的"
#~ "破壞。另一個原因是，您有可能被惡意誘使執行<emphasis>特洛伊木馬</emphasis>"
#~ "程式 &mdash; 這是一種在您未知的情況下利用超級使用者權限損害系統安全的程"
#~ "式。任何合格的 Unix 系統管理書籍中都會涉及到這一主題 &mdash; 如果您不是很"
#~ "瞭解這方面的內容，建議您找一本書進行學習。"

#~ msgid ""
#~ "You will first be prompted for the user's full name. Then you'll be asked "
#~ "for a name for the user account; generally your first name or something "
#~ "similar will suffice and indeed will be the default. Finally, you will be "
#~ "prompted for a password for this account."
#~ msgstr ""
#~ "您首先會被要求輸入使用者的全名。然後要求輸入使用者帳號名﹔通常為姓之類的即"
#~ "可，並且會成為預設值。最後，您將要求輸入該帳號的密碼。"

#~ msgid ""
#~ "If at any point after installation you would like to create another "
#~ "account, use the <command>adduser</command> command."
#~ msgstr ""
#~ "如果在安裝完畢後您還希望建立其它新帳戶，請使用 <command>adduser</command> "
#~ "命令。"

#~ msgid "Setting Up PPP"
#~ msgstr "設定 PPP"

#~ msgid ""
#~ "If no network was configured during the first stage of the installation, "
#~ "you will next be asked whether you wish to install the rest of the system "
#~ "using PPP. PPP is a protocol used to establish dialup connections with "
#~ "modems. If you configure the modem at this point, the installation system "
#~ "will be able to download additional packages or security updates from the "
#~ "Internet during the next steps of the installation. If you don't have a "
#~ "modem in your computer or if you prefer to configure your modem after the "
#~ "installation, you can skip this step."
#~ msgstr ""
#~ "如果您的電腦沒有連上網路，接下來您將會被問到是否希望使用 PPP 安裝其餘的系"
#~ "統。PPP 是透過調變解調器建立撥號連接的通訊協定。如果您現在需要設定調變解調"
#~ "器，安裝系統將下載一些額外的軟體套件，或者在安裝的下一階段從網際網路安全更"
#~ "新。如果您的電腦沒有調變解調器，或者希望安裝完之後再設定調變解調器，您可以"
#~ "跳過這一節。"

#~ msgid ""
#~ "In order to configure your PPP connection, you will need some information "
#~ "from your Internet Service Provider (ISP), including phone number, "
#~ "username, password and DNS servers (optional). Some ISPs provide "
#~ "installation guidelines for Linux distributions. You can use that "
#~ "information even if they don't specifically target Debian since most of "
#~ "the configuration parameters (and software) is similar amongst Linux "
#~ "distributions."
#~ msgstr ""
#~ "為了設定 PPP 連線，您需要從網際網路伺服器供應商 (ISP) 那裡瞭解一些資訊，包"
#~ "括電話號碼，使用者名稱，密碼和 DNS 伺服器 (非必要)。一些 ISP 為 Linux 發行"
#~ "版提供安裝指引。即使他們並不是針對 Debian，您也可以使用這些資訊，這是因為"
#~ "在 Linux 發行版之間，大多數的設定參數 (和軟體) 都類似。"

#~ msgid ""
#~ "If you do choose to configure PPP at this point, a program named "
#~ "<command>pppconfig</command> will be run. This program helps you "
#~ "configure your PPP connection. <emphasis>Make sure, when it asks you for "
#~ "the name of your dialup connection, that you name it <userinput>provider</"
#~ "userinput>.</emphasis>"
#~ msgstr ""
#~ "如果您選擇在現在設定PPP，應用程式 <command>pppconfig</command> 將幫助您完"
#~ "成後續工作。<emphasis>記住，當程式提示您輸入撥號連接名稱時，您應該輸入 "
#~ "<userinput>供應商名稱</userinput>。</emphasis>"

#~ msgid ""
#~ "Hopefully, the <command>pppconfig</command> program will walk you through "
#~ "a trouble-free PPP connection setup. However, if it does not work for "
#~ "you, see below for detailed instructions."
#~ msgstr ""
#~ "如果順利，<command>pppconfig</command> 能夠帶領您快速完成設定。否則，您需"
#~ "要繼續查看下面的具體指令介紹。"

#~ msgid ""
#~ "In order to setup PPP, you'll need to know the basics of file viewing and "
#~ "editing in GNU/Linux. To view files, you should use <command>more</"
#~ "command>, and <command>zmore</command> for compressed files with a "
#~ "<userinput>.gz</userinput> extension. For example, to view "
#~ "<filename>README.debian.gz</filename>, type <userinput>zmore README."
#~ "debian.gz</userinput>. The base system comes with an editor named "
#~ "<command>nano</command>, which is very simple to use, but does not have a "
#~ "lot of features. You will probably want to install more full-featured "
#~ "editors and viewers later, such as <command>jed</command>, <command>nvi</"
#~ "command>, <command>less</command>, and <command>emacs</command>."
#~ msgstr ""
#~ "在開始之前，您需要瞭解在 GNU/Linux 中閱覽和編輯檔案的基礎知識。要閱覽一個"
#~ "檔案，您可以使用 <command>more</command>，和 <command>zmore</command> 閱覽"
#~ "副檔名為 <userinput>.gz</userinput> 的壓縮檔。例如：要閱覽 "
#~ "<filename>README.debian.gz</filename>，您可以鍵入指令 <userinput>zmore "
#~ "README.debian.gz</userinput>。最小安裝的系統中帶有一個使用簡單但功能略少的"
#~ "編輯器，叫 <command>nano</command>。您也可以後續安裝其它功能強大的編輯器"
#~ "如 <command>jed</command>, <command>nvi</command>, <command>less</"
#~ "command>，和 <command>emacs</command>。"

#~ msgid ""
#~ "Edit <filename>/etc/ppp/peers/provider</filename> and replace <userinput>/"
#~ "dev/modem</userinput> with <userinput>/dev/ttyS<replaceable>&num;</"
#~ "replaceable></userinput> where <replaceable>&num;</replaceable> stands "
#~ "for the number of your serial port. In Linux, serial ports are counted "
#~ "from 0; your first serial port <phrase arch=\"i386\">(i.e., "
#~ "<userinput>COM1</userinput>)</phrase> is <filename>/dev/ttyS0</filename> "
#~ "under Linux. <phrase arch=\"powerpc;m68k\">On Macintoshes with serial "
#~ "ports, the modem port is <filename>/dev/ttyS0</filename> and the printer "
#~ "port is <filename>/dev/ttyS1</filename>.</phrase> The next step is to "
#~ "edit <filename>/etc/chatscripts/provider</filename> and insert your "
#~ "provider's phone number, your user-name and password. Please do not "
#~ "delete the <quote>\\q</quote> that precedes the password. It hides the "
#~ "password from appearing in your log files."
#~ msgstr ""
#~ "編輯 <filename>/etc/ppp/peers/provider</filename> 並替換 <userinput>/dev/"
#~ "modem</userinput> 為 <userinput>/dev/ttyS<replaceable>&num;</"
#~ "replaceable></userinput> 其中 <replaceable>&num;</replaceable> 取決於您的"
#~ "數據機序列埠編號。在 Linux 下，序列埠是從0開始，您的第一個序列埠 <phrase "
#~ "arch=\"i386\">(如 <userinput>COM1</userinput>)</phrase> 就叫 <filename>/"
#~ "dev/ttyS0</filename>。<phrase arch=\"powerpc;m68k\">如果您在 Macintoshes "
#~ "上，那麼數據機序列埠是 <filename>/dev/ttyS0</filename> 印表機的連接埠是 "
#~ "<filename>/dev/ttyS1</filename>。</phrase>下一步是編輯 <filename>/etc/"
#~ "chatscripts/provider</filename> 然後輸入供應商的電話號碼，您的使用者名稱與"
#~ "密碼。請勿刪除出現在密碼之前的 <quote>\\q</quote>。這是用來隱藏您的密碼，"
#~ "而不出現在紀錄檔案裡面。"

#~ msgid ""
#~ "Many providers use PAP or CHAP for login sequence instead of text mode "
#~ "authentication. Others use both. If your provider requires PAP or CHAP, "
#~ "you'll need to follow a different procedure. Comment out everything below "
#~ "the dialing string (the one that starts with <quote>ATDT</quote>) in "
#~ "<filename>/etc/chatscripts/provider</filename>, modify <filename>/etc/ppp/"
#~ "peers/provider</filename> as described above, and add <userinput>user "
#~ "<replaceable>name</replaceable></userinput> where <replaceable>name</"
#~ "replaceable> stands for your user-name for the provider you are trying to "
#~ "connect to. Next, edit <filename>/etc/ppp/pap-secrets</filename> or "
#~ "<filename>/etc/ppp/chap-secrets</filename> and enter your password there."
#~ msgstr ""
#~ "許多供應商現在使用 PAP 或 CHAP 作為認證方式來取代最初的文字模式認證。部份"
#~ "ISP兩者都採用，如果您的ISP需要 PAP 或 CHAP，您需要按如下步驟進行設定：將檔"
#~ "案中撥號字串之後的所有內容加上註解符號 (即從 <quote>ATDT</quote>)，在 "
#~ "<filename>/etc/chatscripts/provider</filename> 裡同樣也把 <filename>/etc/"
#~ "ppp/peers/provider</filename> 檔案中撥號字串之後的內容加上註解，並添加 "
#~ "<userinput>user <replaceable>name</replaceable></userinput>，其中 "
#~ "<replaceable>name</replaceable> 指的是您在ISP的撥號使用者名稱。然後編輯 "
#~ "<filename>/etc/ppp/pap-secrets</filename> 或 <filename>/etc/ppp/chap-"
#~ "secrets</filename> 並在其中填入您的密碼。"

#~ msgid ""
#~ "You will also need to edit <filename>/etc/resolv.conf</filename> and add "
#~ "your provider's name server (DNS) IP addresses. The lines in <filename>/"
#~ "etc/resolv.conf</filename> are in the following format: "
#~ "<userinput>nameserver <replaceable>xxx.xxx.xxx.xxx</replaceable></"
#~ "userinput> where the <replaceable>x</replaceable>s stand for numbers in "
#~ "your IP address. Optionally, you could add the <userinput>usepeerdns</"
#~ "userinput> option to the <filename>/etc/ppp/peers/provider</filename> "
#~ "file, which will enable automatic choosing of appropriate DNS servers, "
#~ "using settings the remote host usually provides."
#~ msgstr ""
#~ "您還需要編輯 <filename>/etc/resolv.conf</filename>，將您的 ISP 網域名稱伺"
#~ "服器 (DNS) 的 IP 位址填寫進去。<filename>/etc/resolv.conf</filename> 裡面"
#~ "內容的填寫格式應該是：<userinput>nameserver <replaceable>xxx.xxx.xxx.xxx</"
#~ "replaceable></userinput> 這裡的 <replaceable>x</replaceable> 是 DNS 的 IP "
#~ "位址。作為選項，您也可以在 <userinput>usepeerdns</userinput> 中添加 "
#~ "<filename>/etc/ppp/peers/provider</filename>，這樣系統能夠在必要的時候選擇"
#~ "適當的 DNS 伺服器。"

#~ msgid ""
#~ "Unless your provider has a login sequence different from the majority of "
#~ "ISPs, you are done! Start the PPP connection by typing <command>pon</"
#~ "command> as root, and monitor the process using <command>plog</command> "
#~ "command. To disconnect, use <command>poff</command>, again, as root."
#~ msgstr ""
#~ "除非您的 ISP 的登陸方式與其它主要 ISP 有極大的差異，否則這樣就設定完成了。"
#~ "以root的身份輸入 <command>pon</command> 就能啟用 PPP 連線，<command>plog</"
#~ "command> 能夠監控目前連接，要中斷連線，則同樣是以root身份執行 "
#~ "<command>poff</command>。"

#~ msgid ""
#~ "Read <filename>/usr/share/doc/ppp/README.Debian.gz</filename> file for "
#~ "more information on using PPP on Debian."
#~ msgstr ""
#~ "閱讀 <filename>/usr/share/doc/ppp/README.Debian.gz</filename> 可以獲得更"
#~ "多 Debian 上的 PPP 設定資訊。"

#~ msgid ""
#~ "For static SLIP connections, you will need to add the "
#~ "<userinput>slattach</userinput> command (from the <classname>net-tools</"
#~ "classname> package) into <filename>/etc/init.d/network</filename>. "
#~ "Dynamic SLIP will require the <classname>gnudip</classname> package."
#~ msgstr ""
#~ "對於靜態 SLIP 連接來說，您需要加上 <userinput>slattach</userinput> 指令 "
#~ "(位於 <classname>net-tools</classname> 軟體套件中) 到 <filename>/etc/init."
#~ "d/network</filename>。動態 SLIP 需要 <classname>gnudip</classname> 軟體套"
#~ "件。"

#~ msgid "Setting Up PPP over Ethernet (PPPOE)"
#~ msgstr "設定 PPP over Ethernet (PPPOE)"

#~ msgid ""
#~ "PPPOE is a protocol related to PPP used for some broadband connections. "
#~ "There is currently no support in base configuration to help you set this "
#~ "up. However, the necessary software has been installed, which means you "
#~ "can configure PPPOE manually at this stage of the installation by "
#~ "switching to VT2 and running <command>pppoeconf</command>."
#~ msgstr ""
#~ "PPPOE 是與 PPP 相關的協定，用於寬頻連線。目前基本系統裡面不會幫您建立設"
#~ "定。然而，相應的軟體套件已經安裝，也就意味著您可以在本階段手動設定 PPPOE，"
#~ "只需切換到 VT2，然後執行 <command>pppoeconf</command>。"

#~ msgid "Configuring APT"
#~ msgstr "設定 APT"

#~ msgid ""
#~ "The main means that people use to install packages on their system is via "
#~ "a program called <command>apt-get</command>, from the <classname>apt</"
#~ "classname> package.<footnote> <para> Note that the actual program that "
#~ "installs packages is called <command>dpkg</command>. However, this "
#~ "package is more of a low-level tool. <command>apt-get</command> is a "
#~ "higher-level tool as it will invoke <command>dpkg</command> as "
#~ "appropriate and also because it knows to install other packages which are "
#~ "required for the package you're trying to install, as well as how to "
#~ "retrieve the package from your CD, the network, or wherever. </para> </"
#~ "footnote> Other front-ends for package management, like "
#~ "<command>aptitude</command>, <command>synaptic</command> and the older "
#~ "<command>dselect</command> also use and depend on <command>apt-get</"
#~ "command>. These front-ends are recommended for new users, since they "
#~ "integrate some additional features (package searching and status checks) "
#~ "in a nice user interface."
#~ msgstr ""
#~ "本節的重點是 <command>apt-get</command>，這是一個用來安裝各種軟體的程式，"
#~ "它被包含在 <classname>apt</classname> 軟體套件中。<footnote> <para> 事實"
#~ "上，真正用來安裝軟體套件的程式是 <command>dpkg</command>。但這是一個比較低"
#~ "階的工具。<command>apt-get</command> 是一個高階工具，它可以在適當的時候執"
#~ "行 <command>dpkg</command>，並在安裝某個軟體套件時自動安裝所需的其它軟體套"
#~ "件， 並且能夠從您的光碟、網路或其它地方下載這些套件。</para> </footnote> "
#~ "其他的套件管理前端程式，像 <command>aptitude</command>，"
#~ "<command>synaptic</command> 和較早的 <command>dselect</command> 也是使用並"
#~ "依賴 <command>apt-get</command>。在此推薦這些前端軟體給新使用者使用，因為"
#~ "它們在良好的使用者介面下整合了一些其他功能 (搜索套件與狀態檢驗)。"

#~ msgid ""
#~ "APT must be configured so that it knows where to retrieve packages from. "
#~ "The helper application which assists in this task is called <command>apt-"
#~ "setup</command>."
#~ msgstr ""
#~ "您必須設定 APT，使它明白該從哪裡取得軟體套件。有一個幫助您完成這工作的程式"
#~ "叫 <command>apt-setup</command>。"

#~ msgid ""
#~ "The next step in your configuration process is to tell APT where other "
#~ "Debian packages can be found. Note that you can re-run this tool at any "
#~ "point after installation by running <command>apt-setup</command>, or by "
#~ "manually editing <filename>/etc/apt/sources.list</filename>."
#~ msgstr ""
#~ "然後該告訴 APT 其它軟體套件可以在什麼地方取得軟體套件。您可以在安裝完畢後"
#~ "的任何時候重新執行 <command>apt-setup</command> 以進行設定，或者手動編輯 "
#~ "<filename>/etc/apt/sources.list</filename>。"

#~ msgid ""
#~ "If an official CD-ROM is in the drive at this point, then that CD-ROM "
#~ "should automatically be configured as an apt source without prompting. "
#~ "You will notice this because you will see the CD-ROM being scanned."
#~ msgstr ""
#~ "如果此時光碟機內放有官方發佈的光碟，那麼光碟機將會被自動設定為 apt 來源，"
#~ "而不會有提示。您會發現系統掃瞄您的光碟。"

#~ msgid ""
#~ "For users without an official CD-ROM, you will be offered an array of "
#~ "choices for how Debian packages are accessed: FTP, HTTP, CD-ROM, or a "
#~ "local file system."
#~ msgstr ""
#~ "對於那些沒有官方發佈光碟的使用者，有一列選項會讓您選擇如何取得軟體套件："
#~ "FTP、HTTP、CD-ROM 或者本地檔案系統。"

#~ msgid ""
#~ "You should know that it's perfectly acceptable to have a number of "
#~ "different APT sources, even for the same Debian archive. <command>apt-"
#~ "get</command> will automatically pick the package with the highest "
#~ "version number given all the available versions. Or, for instance, if you "
#~ "have both an HTTP and a CD-ROM APT source, <command>apt-get</command> "
#~ "should automatically use the local CD-ROM when possible, and only resort "
#~ "to HTTP if a newer version is available there. However, it is not a good "
#~ "idea to add unnecessary APT sources, since this will tend to slow down "
#~ "the process of checking the network archives for new versions."
#~ msgstr ""
#~ "您完全可以添加多個不同的 APT 來源 (甚至是同一 Debian 檔案庫也可以)。"
#~ "<command>apt-get</command> 會自動挑選出軟體套件中的最新版本。例如，如果您"
#~ "同時使用 HTTP 和 CD-ROM 作為 APT 來源，<command>apt-get</command> 會在有新"
#~ "版本的時候採用 HTTP 來源，沒有新版本時自動採用 CD-ROM 來源。儘管如此，仍然"
#~ "不建議您增加不必要的 APT 來源，因為這會大降低檢查網路檔案庫中新版本軟體的"
#~ "速度。"

#~ msgid "Configuring Network Package Sources"
#~ msgstr "設定網路軟體套件來源"

#~ msgid ""
#~ "If you plan on installing the rest of your system via the network, the "
#~ "most common option is to select the <userinput>http</userinput> source. "
#~ "The <userinput>ftp</userinput> source is also acceptable, but tends to be "
#~ "somewhat slower making connections."
#~ msgstr ""
#~ "如果您計劃透過網路安裝系統的其它部分，常見的作法是選擇 <userinput>http</"
#~ "userinput> 來源。當然，<userinput>ftp</userinput> 來源也是可以的，只是在連"
#~ "接時會略慢一些。"

#~ msgid ""
#~ "The next step during the configuration of network package sources is to "
#~ "tell <command>apt-setup</command> which country you live in. This "
#~ "configures which of the official Debian Internet mirrors you will connect "
#~ "to. Depending on which country you select, you will be presented with a "
#~ "list of possible servers. It's generally fine to pick the one at the top "
#~ "of the list, but any of them should work. Note however that the mirror "
#~ "list provided by the installation was generated when this version of "
#~ "Debian was released and some mirrors may no longer be available."
#~ msgstr ""
#~ "接下來您需要告訴 <command>apt-setup</command> 您生活在哪個國家。Debian會為"
#~ "您選擇最近的官方 Debian 網路鏡像站。根據您選擇的國家，程式會列出一些可能的"
#~ "伺服器列表。通常選擇最上面的一個，但所有伺服器應該都是正常可用的。之後，進"
#~ "行測試，如果您發現任何問題，您應該選擇另外一個。請注意，伺服器列表是在發"
#~ "行 Debian 時生成的，在發行之後到您安裝的這段時間內，一些鏡像網站也許無法存"
#~ "取。"

#~ msgid ""
#~ "After you have selected a mirror, you will be asked if a proxy server "
#~ "should be used. A proxy server is a server that will forward all your "
#~ "HTTP and/or FTP requests to the Internet and is most often used to "
#~ "regulate and optimize access to the Internet on corporate networks. In "
#~ "some networks only the proxy server is allowed access to the Internet, in "
#~ "which case you will have to enter the name of the proxy server. You may "
#~ "also have to include an user name and password. Most home users will not "
#~ "need to specify a proxy server, although some ISPs may provide proxy "
#~ "servers for their users."
#~ msgstr ""
#~ "選擇鏡像站之後，您將會被詢問是否需要使用代理伺服器。代理伺服器是用來轉送您"
#~ "以 HTTP 和/或 FTP 要求存取網際網路的伺服器，通常在公司網路裡用來調節和最佳"
#~ "化網際網路的使用效率。在某些網路中只能透過代理伺服器存取網際網路，因此您不"
#~ "得不輸入代理伺服器名稱。您可能還要輸入使用者名稱和密碼。大多數的家庭使用者"
#~ "不需設定代理伺服器，這是因為一些 ISP 會提供。"

#~ msgid ""
#~ "After you select a mirror, your new network package source will be "
#~ "tested. If all goes well, you will be prompted whether you want to add "
#~ "another package source. If you have any problems using the package source "
#~ "you selected, try using a different mirror (either from your country list "
#~ "or from the global list), or try using a different network package source."
#~ msgstr ""
#~ "選擇鏡像之後，系統會測試您的網路軟體套件來源。一切正常的話，程式會提示您是"
#~ "否想要設定其它的網路來源。如果您的軟體套件源有問題，可以嘗試不同的鏡像網"
#~ "站 (從您的國家列表中或者全體列表) 或者使用不同的網路軟體套件來源。"

#~ msgid "Package Installation"
#~ msgstr "安裝軟體套件"

#~ msgid ""
#~ "Next you will be offered a number of pre-rolled software configurations "
#~ "offered by Debian. You could always choose, package by package, what you "
#~ "want to install on your new machine. This is the purpose of the "
#~ "<command>aptitude</command> program, described below. But this can be a "
#~ "long task with around &num-of-distrib-pkgs; packages available in Debian!"
#~ msgstr ""
#~ "接下來，您將看到 Debain 事先選擇好的一些軟體套件。您可以逐個選擇哪些需要安"
#~ "裝到您的新系統上。這是 <command>aptitude</command> 程式的目的，後面會說"
#~ "明。但這可能是一項困難的任務，因為 Debian 有 &num-of-distrib-pkgs; 個軟體"
#~ "套件。"

#~ msgid ""
#~ "So, you have the ability to choose <emphasis>tasks</emphasis> first, and "
#~ "then add on more individual packages later. These tasks loosely represent "
#~ "a number of different jobs or things you want to do with your computer, "
#~ "such as <quote>desktop environment</quote>, <quote>web server</quote>, or "
#~ "<quote>print server</quote><footnote> <para> You should know that to "
#~ "present this list, <command>base-config</command> is merely invoking the "
#~ "<command>tasksel</command> program. For manual package selection, the "
#~ "<command>aptitude</command> program is being run. Any of these can be run "
#~ "at any time after installation to install (or remove) more packages. If "
#~ "you are looking for a specific single package, after installation is "
#~ "complete, simply run <userinput>aptitude install <replaceable>package</"
#~ "replaceable></userinput>, where <replaceable>package</replaceable> is the "
#~ "name of the package you are looking for. </para> </footnote>. <xref "
#~ "linkend=\"tasksel-size-list\"/> lists the space requirements for the "
#~ "available tasks."
#~ msgstr ""
#~ "所以，您可以先選擇 <emphasis>tasks</emphasis>，然後再單獨添加軟體套件。軟"
#~ "體集約略表示您要在電腦上從事的各類工作，例如 <quote>desktop environment</"
#~ "quote>、<quote>web server</quote> 或者 <quote>print server</"
#~ "quote><footnote> <para> 您應該知道顯示這個列表，<command>base-config</"
#~ "command> 僅是執行 <command>tasksel</command> 程式。手動選擇安裝軟體套件"
#~ "時，<command>aptitude</command> 程式則被呼叫。安裝程序之後的任何時候，一旦"
#~ "需要安裝 (或者刪除) 更多的軟體套件，它都被使用。如果您在尋找特定的軟體套"
#~ "件，當安裝完成後，只需執行 <userinput>aptitude install "
#~ "<replaceable>package</replaceable></userinput>, 其中 "
#~ "<replaceable>package</replaceable> 是您需要的軟體套件名稱。</para> </"
#~ "footnote>。<xref linkend=\"tasksel-size-list\"/> 列出各 task 所需的空間。"

#~ msgid ""
#~ "Once you've selected your tasks, select <guibutton>Ok</guibutton>. At "
#~ "this point, <command>aptitude</command> will install the packages you've "
#~ "selected."
#~ msgstr ""
#~ "當您選擇了軟體集之後，選擇 <guibutton>確定</guibutton>。此時，"
#~ "<command>aptitude</command> 將安裝您選中的軟體套件。"

#~ msgid ""
#~ "Even if you did not select any tasks at all, any standard, important, or "
#~ "required priority packages that are not yet present on your system will "
#~ "be installed. This functionality is the same as running "
#~ "<userinput>tasksel -ris</userinput> at the command line, and currently "
#~ "involves a download of about 37M of archives. You will be shown the "
#~ "number of packages to be installed, and how many kilobytes of packages, "
#~ "if any, need to be downloaded."
#~ msgstr ""
#~ "注意，即使您沒有選擇任何軟體集，但標準的、重要的，或者系統優先要求的軟體套"
#~ "件將被安裝。該功能相當於在命令列下執行 <userinput>tasksel -ris</"
#~ "userinput>，目前包括下載一個大約 37M 的套件。您會看到將要安裝的軟體套件，"
#~ "若套件需要被下載，您也會看見軟體套件的檔案大小。"

#~ msgid ""
#~ "If you do want to choose what to install on a package by package basis, "
#~ "select the <quote>manual package selection</quote> option in "
#~ "<command>tasksel</command>. If you select one or more tasks alongside "
#~ "this option, <command>aptitude</command> will be called with the "
#~ "<command>--visual-preview</command> option. This means you will be able "
#~ "to review<footnote> <para> You can also change the default selections. If "
#~ "you would like to select any additional package, use <menuchoice> "
#~ "<guimenu>View</guimenu> <guimenuitem>New Package View</guimenuitem> </"
#~ "menuchoice>. </para> </footnote> the packages that are to be installed. "
#~ "If you do not select any tasks, the normal <command>aptitude</command> "
#~ "screen will be displayed. After making your selections you should press "
#~ "<quote><userinput>g</userinput></quote> to start the download and "
#~ "installation of packages."
#~ msgstr ""
#~ "如果您想基於軟體套件安裝軟體，選擇位於 <command>tasksel</command> 的 "
#~ "<quote>手動選取套件</quote> 選項。如果您選擇該選項旁的一個或多項軟體集，"
#~ "aptitude 將以 <command>--visual-preview</command> 選項執行。這表示您可以檢"
#~ "查<footnote> <para> 您可以修改這項預設選擇。如果您希望選擇額外的軟體套件，"
#~ "使用 <menuchoice> <guimenu>瀏覽</guimenu> <guimenuitem>瀏覽新套件</"
#~ "guimenuitem> </menuchoice>。</para> </footnote> 那些將要安裝的軟體套件。如"
#~ "果您不選擇任何軟體集，則一般的 <command>aptitude</command> 畫面被顯示。選"
#~ "擇完畢，請按下 <quote><userinput>g</userinput></quote> 開始下載和安裝軟體"
#~ "套件。"

#~ msgid ""
#~ "If you choose <quote>manual package selection</quote> <emphasis>without</"
#~ "emphasis> selecting any tasks, no packages will be installed by default. "
#~ "This means you can use this option if you want to install a minimal "
#~ "system, but also that the responsibility for selecting any packages not "
#~ "installed as part of the base system (before the reboot) that might be "
#~ "required for your system lies with you."
#~ msgstr ""
#~ "如果您選擇<quote>手動選取套件</quote><emphasis>而不</emphasis>選擇軟體集，"
#~ "預設不會安裝任何軟體套件。這就是說，如果您希望安裝一個最小系統，並且您的系"
#~ "統 (啟動之前) 不需要安裝任何軟體套件，可用使用該選項。"

#~ msgid ""
#~ "Of the &num-of-distrib-pkgs; packages available in Debian, only a small "
#~ "minority are covered by tasks offered in the Task Installer. To see "
#~ "information on more packages, either use <userinput>apt-cache search "
#~ "<replaceable>search-string</replaceable></userinput> for some given "
#~ "search string (see the <citerefentry> <refentrytitle>apt-cache</"
#~ "refentrytitle> <manvolnum>8</manvolnum> </citerefentry> man page), or run "
#~ "<command>aptitude</command> as described below."
#~ msgstr ""
#~ "在 &num-of-distrib-pkgs; 的 Debian 軟體套件中，只有少數被軟體集安裝程式涵"
#~ "蓋。為了瞭解更多軟體套件的資訊，請使用 <userinput>apt-cache search "
#~ "<replaceable>search-string</replaceable></userinput> 搜索字串 (請參閱 "
#~ "<citerefentry> <refentrytitle>apt-cache</refentrytitle> <manvolnum>8</"
#~ "manvolnum> </citerefentry> man 頁), 或者執行 <command>aptitude</command> "
#~ "以觀看畫面下面的說明。"

#~ msgid "Advanced Package Selection with <command>aptitude</command>"
#~ msgstr "<command>aptitude</command> 軟體套件進階選擇"

#~ msgid ""
#~ "<command>Aptitude</command> is a modern program for managing packages. "
#~ "<command>aptitude</command> allows you to select individual packages, set "
#~ "of packages matching given criteria (for advanced users), or whole tasks."
#~ msgstr ""
#~ "<command>Aptitude</command> 是管理軟體套件的流行軟體。<command>aptitude</"
#~ "command> 允許您選擇單獨的軟體套件，符合指定要求的軟體套件群組 (針對進階使"
#~ "用者)，或者整個軟體集。"

#~ msgid ""
#~ "The most basic keybindings are: <informaltable> <tgroup cols=\"2\"> "
#~ "<thead> <row> <entry>Key</entry><entry>Action</entry> </row> </thead> "
#~ "<tbody> <row> <entry><keycap>Up</keycap>, <keycap>Down</keycap></entry> "
#~ "<entry>Move selection up or down.</entry> </row><row> <entry>&enterkey;</"
#~ "entry> <entry>Open/collapse/activate item.</entry> </row><row> "
#~ "<entry><keycap>+</keycap></entry> <entry>Mark package for installation.</"
#~ "entry> </row><row> <entry><keycap>-</keycap></entry> <entry>Mark package "
#~ "for removal.</entry> </row><row> <entry><keycap>d</keycap></entry> "
#~ "<entry>Show package dependencies.</entry> </row><row> <entry><keycap>g</"
#~ "keycap></entry> <entry>Actually download/install/remove packages.</entry> "
#~ "</row><row> <entry><keycap>q</keycap></entry> <entry>Quit current view.</"
#~ "entry> </row><row> <entry><keycap>F10</keycap></entry> <entry>Activate "
#~ "menu.</entry> </row> </tbody></tgroup></informaltable> For more commands "
#~ "see the online help under the <keycap>?</keycap> key."
#~ msgstr ""
#~ "最基本的按鍵組合是： <informaltable> <tgroup cols=\"2\"> <thead> <row> "
#~ "<entry>按鍵</entry><entry>動作</entry> </row> </thead> <tbody> <row> "
#~ "<entry><keycap>Up</keycap>, <keycap>Down</keycap></entry> <entry>上下移到"
#~ "選項。</entry> </row><row> <entry>&enterkey;</entry> <entry>展開/關閉/啟"
#~ "用 項目。</entry> </row><row> <entry><keycap>+</keycap></entry> <entry>標"
#~ "註要安裝的軟體套件。</entry> </row><row> <entry><keycap>-</keycap></"
#~ "entry> <entry>標註要刪除的軟體套件。</entry> </row><row> "
#~ "<entry><keycap>d</keycap></entry> <entry>顯示軟體套件依賴關係。</entry> </"
#~ "row><row> <entry><keycap>g</keycap></entry> <entry>實際 下載/安裝/刪除 軟"
#~ "體套件。</entry> </row><row> <entry><keycap>q</keycap></entry> <entry>離開"
#~ "目前畫面。</entry> </row><row> <entry><keycap>F10</keycap></entry> <entry>"
#~ "啟用選單</entry> </row> </tbody></tgroup></informaltable> 查看更多的幫助請"
#~ "按 <keycap>?</keycap> 鍵。"

#~ msgid "Prompts During Software Installation"
#~ msgstr "軟體安裝過程中的指令"

#~ msgid ""
#~ "Each package you selected with <command>tasksel</command> or "
#~ "<command>aptitude</command> is downloaded, unpacked and then installed in "
#~ "turn by the <command>apt-get</command> and <command>dpkg</command> "
#~ "programs. If a particular program needs more information from the user, "
#~ "it will prompt you during this process. You might also want to keep an "
#~ "eye on the output during the process, to watch for any installation "
#~ "errors (although you will be asked to acknowledge errors which prevented "
#~ "a package's installation)."
#~ msgstr ""
#~ "您透過 <command>tasksel</command> 或 <command>aptitude</command> 選擇的每"
#~ "個軟體套件包，都是由 <command>apt-get</command> 和 <command>dpkg</"
#~ "command> 程式下載、解開並安裝的。部份特殊的軟體在安裝過程中需要使用者提供"
#~ "更多的資訊，在這一過程中會有相關提示。您需要留意該過程的螢幕輸出，以判斷安"
#~ "裝中是發生錯誤 (儘管一般情況下如果一個軟體套件無法安裝，您會收到一個明確的"
#~ "錯誤訊息)。"

#~ msgid "Settings for the X Server"
#~ msgstr "設定 X 伺服器"

#~ msgid ""
#~ "On iMacs, and some older Macintoshes as well, the X Server software "
#~ "doesn't calculate appropriate video settings. You will need to choose the "
#~ "<guimenuitem>Advanced</guimenuitem> option during configuration of the "
#~ "video settings. For the monitor's horizontal sync range, enter "
#~ "59&ndash;63. You can leave the default for vertical refresh range."
#~ msgstr ""
#~ "在 iMacs 或者一些古老的 Macintoshes 機器上，X 伺服器軟體無法自動計算出適當"
#~ "的顯示卡設定。您需要在設定顯示卡時選擇<guimenuitem>進階</guimenuitem>選"
#~ "項，在螢幕的水平同步範圍中，填入 59&ndash;63。對垂直更新範圍，可以選擇預設"
#~ "值。"

#~ msgid ""
#~ "The mouse device should be set to <userinput>/dev/input/mice</userinput>."
#~ msgstr "滑鼠設備可以設定為 <userinput>/dev/input/mice</userinput>。"

#~ msgid "Configuring Your Mail Transport Agent"
#~ msgstr "設定您的郵件傳輸代理 (MTA)"

#~ msgid ""
#~ "Today, email is a very important part of many people's life, so it's no "
#~ "surprise Debian lets you configure your mail system right as a part of "
#~ "the installation process. The standard mail transport agent in Debian is "
#~ "<command>exim4</command>, which is relatively small, flexible, and easy "
#~ "to learn."
#~ msgstr ""
#~ "今天，電子郵件已經成為很多人生活中不可或缺的部份，所以，Debian 讓您在安裝"
#~ "過程中設定郵件傳輸代理，並不是件奇怪的事。Debian 中的標準郵件傳輸代理是 "
#~ "<command>exim4</command>。這是一個非常小巧、靈活並且容易理解的工具。"

#~ msgid ""
#~ "You may ask if this is needed even if your computer is not connected to "
#~ "any network. The short answer is: Yes. The longer explanation: Some "
#~ "system utilities (like <command>cron</command>, <command>quota</command>, "
#~ "<command>aide</command>, &hellip;) may send you important notices via "
#~ "email."
#~ msgstr ""
#~ "您可能會問，我的電腦並沒有連接到網路上，是否也需要這一步呢？答案是：是的。"
#~ "稍長一點的解釋是：部份系統工具 (例如 <command>cron</command>, "
#~ "<command>quota</command>, <command>aide</command> 等) 的重要通知都是透過郵"
#~ "件發送的。"

#~ msgid ""
#~ "So on the first screen you will be presented with several common mail "
#~ "scenarios. Choose the one that most closely resembles your needs:"
#~ msgstr ""
#~ "所以，在第一個螢幕上您可以看到幾個常見的郵件設定方案。請選擇一個最適合您需"
#~ "求的。"

#~ msgid "internet site"
#~ msgstr "網際網路站"

#~ msgid ""
#~ "Your system is connected to a network and your mail is sent and received "
#~ "directly using SMTP. On the following screens you will be asked a few "
#~ "basic questions, like your machine's mail name, or a list of domains for "
#~ "which you accept or relay mail."
#~ msgstr ""
#~ "您的系統連接到網路上，並且您透過 SMTP 直接收發郵件。在接下來的幾頁中，程式"
#~ "會詢問您一些基本問題，如：您的機器的郵件名稱、您接受或轉發郵件的網域名稱等"
#~ "等。"

#~ msgid "mail sent by smarthost"
#~ msgstr "用 smarthost 發信"

#~ msgid ""
#~ "In this scenario is your outgoing mail forwarded to another machine, "
#~ "called a <quote>smarthost</quote>, which does the actual job for you. "
#~ "Smarthost also usually stores incoming mail addressed to your computer, "
#~ "so you don't need to be permanently online. That also means you have to "
#~ "download your mail from the smarthost via programs like fetchmail. This "
#~ "option is suitable for dial-up users."
#~ msgstr ""
#~ "在這個方案中，您的外送郵件將被另一台我們稱之為 <quote>smarthost</quote> 的"
#~ "主機轉發，由它來完成實際的郵件發送工作。Smarthost 通常也能存放將要投遞到您"
#~ "的電腦上的郵件，因此您並不需要永遠連線。也就是說，您必須透過諸如 "
#~ "fetchmail 之類的程式將郵件從 smarthost 下載回來。這一選項通常適合撥號使用"
#~ "者。"

#~ msgid "local delivery only"
#~ msgstr "僅在本地發送"

#~ msgid ""
#~ "Your system is not on a network and mail is sent or received only between "
#~ "local users. Even if you don't plan to send any messages, this option is "
#~ "highly recommended, because some system utilities may send you various "
#~ "alerts from time to time (e.g. beloved <quote>Disk quota exceeded</"
#~ "quote>). This option is also convenient for new users, because it doesn't "
#~ "ask any further questions."
#~ msgstr ""
#~ "您的系統並未連接網路，則郵件僅僅在本地使用者間傳遞。即使您不打算發送任何郵"
#~ "件，我們也建議您選擇此選項，因為部份系統工具可能隨時會發送一些警告資訊 (例"
#~ "如：可愛的 <quote>Disk quota exceeded</quote>)。由於選擇此項後不需要回答任"
#~ "何問題，因此這一選項也非常適合新手。"

#~ msgid "no configuration at this time"
#~ msgstr "現在不進行設定"

#~ msgid ""
#~ "Choose this if you are absolutely convinced you know what you are doing. "
#~ "This will leave you with an unconfigured mail system &mdash; until you "
#~ "configure it, you won't be able to send or receive any mail and you may "
#~ "miss some important messages from your system utilities."
#~ msgstr ""
#~ "除非您真的知道您在做什麼，否則請不要選擇這一選項。這會留下一個未設定的郵件"
#~ "系統 &mdash; 在您再次設定它之前，您都無法收發任何郵件，並且可能會錯過一些"
#~ "系統工具發出的重要資訊。"

#~ msgid ""
#~ "If none of these scenarios suits your needs, or if you need a finer "
#~ "setup, you will need to edit configuration files under the <filename>/etc/"
#~ "exim4</filename> directory after the installation is complete. More "
#~ "information about <command>exim4</command> may be found under <filename>/"
#~ "usr/share/doc/exim4</filename>."
#~ msgstr ""
#~ "如果以上的方案都不適合您的需求，或者您需要一個更好的設定，在安裝完畢後，您"
#~ "可以編輯 <filename>/etc/exim4</filename> 目錄下的設定檔。您還可以在 "
#~ "<filename>/usr/share/doc/exim4</filename> 下找到更多關於 <command>exim4</"
#~ "command> 的資料。"