# Debian GNU/Linux Installation Guide
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
"POT-Creation-Date: 2006-05-01 18:59+0000\n"
"PO-Revision-Date: 2006-05-13 12:08+0800\n"
"Last-Translator: Ji YongGang<jungle@soforge.com>\n"
"Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#: installation-howto.xml:5
#, no-c-format
msgid "Installation Howto"
msgstr "安装指南"

#. Tag: para
#: installation-howto.xml:7
#, no-c-format
msgid ""
"This document describes how to install &debian; &releasename; for the &arch-"
"title; (<quote>&architecture;</quote>) with the new &d-i;. It is a quick "
"walkthrough of the installation process which should contain all the "
"information you will need for most installs. When more information can be "
"useful, we will link to more detailed explanations in the <link linkend="
"\"debian_installation_guide\">&debian; Installation Guide</link>."
msgstr ""
"本文介绍了如何在 &arch-title; (<quote>&architecture;</quote>) 架构的计算机"
"上，使用新版的 &d-i; 安装 &debian; &releasename;。这是一次对安装过程的走马观"
"花式的简介，但是它应该囊括了大多数情况下您进行安装所必须的信息。当有必要获得"
"更多信息时，我们会有相应的较详尽的说明文档 <link linkend="
"\"debian_installation_guide\">&debian;安装指南</link>。"

#. Tag: title
#: installation-howto.xml:20
#, no-c-format
msgid "Preliminaries"
msgstr "前言"

#. Tag: para
#: installation-howto.xml:21
#, no-c-format
msgid ""
"<phrase condition=\"unofficial-build\"> The debian-installer is still in a "
"beta state. </phrase> If you encounter bugs during your install, please "
"refer to <xref linkend=\"submit-bug\"/> for instructions on how to report "
"them. If you have questions which cannot be answered by this document, "
"please direct them to the debian-boot mailing list (&email-debian-boot-"
"list;) or ask on IRC (#debian-boot on the freenode network)."
msgstr ""
"<phrase condition=\"unofficial-build\"> debian-installer 仍然处于 beta 测试阶"
"段。</phrase> 如果您在安装时碰到程序出错，请参考 <xref linkend=\"submit-bug"
"\"/> 回报错误。倘若本文档不能够回答您所有的疑问，那么请带着这些问题去 debian-"
"boot 的邮件列表(&email-debian-boot-list;)问问看，或者您也可以在 irc (即 "
"freenode 站点的 #debian-boot 频道)上直接提问。"

#. Tag: title
#: installation-howto.xml:37
#, no-c-format
msgid "Booting the installer"
msgstr "安装套件的引导"

#. Tag: para
#: installation-howto.xml:38
#, no-c-format
msgid ""
"<phrase condition=\"unofficial-build\"> For some quick links to CD images, "
"check out the <ulink url=\"&url-d-i;\"> &d-i; home page</ulink>. </phrase> "
"The debian-cd team provides builds of CD images using &d-i; on the <ulink "
"url=\"&url-debian-cd;\">Debian CD page</ulink>. For more information on "
"where to get CDs, see <xref linkend=\"official-cdrom\"/>."
msgstr ""
"<phrase condition=\"unofficial-build\"> 要想找到几个便捷的 CD 映像文件的链"
"接，请看 <ulink url=\"&url-d-i;\"> &d-i; 的主页</ulink>。</phrase> Debian-cd "
"小组在 <ulink url=\"&url-debian-cd;\">Debian CD 页</ulink>上提供了使用 &d-i; "
"CD 映像的已编译版本。如果您需要了解有关如何得到这些 CD 的更多信息，请看 "
"<xref linkend=\"official-cdrom\"/>。"

#. Tag: para
#: installation-howto.xml:48
#, no-c-format
msgid ""
"Some installation methods require other images than CD images. <phrase "
"condition=\"unofficial-build\"> The <ulink url=\"&url-d-i;\">&d-i; home "
"page</ulink> has links to other images. </phrase> <xref linkend=\"where-files"
"\"/> explains how to find images on Debian mirrors."
msgstr ""
"有些安装方法需要其它种类的映像而非 CD 的映像。<phrase condition=\"unofficial-"
"build\"> <ulink url=\"&url-d-i;\">&d-i; 的主页</ulink> 上有到其它种类的映像的"
"链接。</phrase> <xref linkend=\"where-files\"/> 会告诉您如何在 Debian 的映像"
"站点找到那些映像文件。"

#. Tag: para
#: installation-howto.xml:58
#, no-c-format
msgid ""
"The subsections below will give the details about which images you should "
"get for each possible means of installation."
msgstr "下面小节会就每种可能的安装方法，具体讲授如何获得所需的映像文件。"

#. Tag: title
#: installation-howto.xml:66
#, no-c-format
msgid "CDROM"
msgstr "CDROM"

#. Tag: para
#: installation-howto.xml:68
#, no-c-format
msgid ""
"There are two different netinst CD images which can be used to install "
"&releasename; with the &d-i;. These images are intended to boot from CD and "
"install additional packages over a network, hence the name 'netinst'. The "
"difference between the two images is that on the full netinst image the base "
"packages are included, whereas you have to download these from the web if "
"you are using the business card image. If you'd rather, you can get a full "
"size CD image which will not need the network to install. You only need the "
"first CD of the set."
msgstr ""
"现在有两种不同的 netinst CD 映像可以用来通过 &d-i; 安装 &releasename;。这些映"
"像文件是被用来刻成光盘的。然后让电脑从光盘启动，再由安装程序从网络上下载安装"
"其它的软件包。“netinst”的名字由此得来。两种映像的区别在于，在完整版的 "
"netinst 映像上包含了基本的软件包，而使用名片版的映像安装则需要从网络上下载它"
"们。如果喜欢的话，您可以下载一个标准大小的 CD 映像文件，用它的话就可以不借助"
"网络安装了。这只需要一套光盘中的第一张就行了。"

#. Tag: para
#: installation-howto.xml:79
#, no-c-format
msgid ""
"Download whichever type you prefer and burn it to a CD. <phrase arch=\"i386"
"\">To boot the CD, you may need to change your BIOS configuration, as "
"explained in <xref linkend=\"bios-setup\"/>.</phrase> <phrase arch=\"powerpc"
"\"> To boot a PowerMac from CD, press the <keycap>c</keycap> key while "
"booting. See <xref linkend=\"boot-cd\"/> for other ways to boot from CD. </"
"phrase>"
msgstr ""
"您想用哪种办法装，就下载相应的映像文件，再把它刻成光盘。<phrase arch=\"i386"
"\">若要从光盘启动，您可能需要根据 <xref linkend=\"bios-setup\"/> 的提示，修"
"改 BIOS 设置。</phrase> <phrase arch=\"powerpc\"> 若要从光盘启动您的 "
"PowerMac，可以在它启动时摁着 <keycap>c</keycap> 键不放。参阅 <xref linkend="
"\"boot-cd\"/> 可以获知其它从 CD 启动的方法。</phrase>"

#. Tag: title
#: installation-howto.xml:93
#, no-c-format
msgid "Floppy"
msgstr "软盘"

#. Tag: para
#: installation-howto.xml:94
#, no-c-format
msgid ""
"If you can't boot from CD, you can download floppy images to install Debian. "
"You need the <filename>floppy/boot.img</filename>, the <filename>floppy/root."
"img</filename> and possibly one of the driver disks."
msgstr ""
"如果您无法从 CD 启动，不妨下载一些软盘的映像文件，用它们来安装 Debian。这时，"
"您需要 <filename>floppy/boot.img</filename> 和 <filename>floppy/root.img</"
"filename>，也许还要那些驱动盘中的某一张。"

#. Tag: para
#: installation-howto.xml:100
#, no-c-format
msgid ""
"The boot floppy is the one with <filename>boot.img</filename> on it. This "
"floppy, when booted, will prompt you to insert a second floppy &mdash; use "
"the one with <filename>root.img</filename> on it."
msgstr ""
"启动软盘就是其上存有 <filename>boot.img</filename> 的一张软盘。当使用这张盘启"
"动时，它会提示您插入第二张软盘 &mdash;，这时请使用里面存有 <filename>root."
"img</filename> 的那张盘。"

#. Tag: para
#: installation-howto.xml:106
#, no-c-format
msgid ""
"If you're planning to install over the network, you will usually need the "
"<filename>floppy/net-drivers.img</filename>, which contains additional "
"drivers for many ethernet cards, and support for PCMCIA."
msgstr ""
"倘若您计划从网络安装，一般来说，您就要准备好 <filename>floppy/net-drivers."
"img</filename>，这里面包含了许多种以太网卡的驱动程序，同时它还加入了对 "
"PCMCIA 的支持。"

#. Tag: para
#: installation-howto.xml:112
#, no-c-format
msgid ""
"If you have a CD, but cannot boot from it, then boot from floppies and use "
"<filename>floppy/cd-drivers.img</filename> on a driver disk to complete the "
"install using the CD."
msgstr ""
"假如您有光驱，但是不能从它启动，那么您可以从软驱启动，再用存在驱动盘里的 "
"<filename>floppy/cd-drivers.img</filename> 来接着完成基于光盘的安装。"

#. Tag: para
#: installation-howto.xml:118
#, no-c-format
msgid ""
"Floppy disks are one of the least reliable media around, so be prepared for "
"lots of bad disks (see <xref linkend=\"unreliable-floppies\"/>). Each "
"<filename>.img</filename> file you downloaded goes on a single floppy; you "
"can use the dd command to write it to /dev/fd0 or some other means (see "
"<xref linkend=\"create-floppy\"/> for details). Since you'll have more than "
"one floppy, it's a good idea to label them."
msgstr ""
"软盘是最不可靠的存储介质之一，因此您最好有碰到许多坏盘的准备(请参看 <xref "
"linkend=\"unreliable-floppies\"/>)。您所下载的每个 <filename>.img</filename> "
"文件其实就是一张软盘。您可以用 dd 命令把它写到 /dev/fd0，也可以用其他方法来做"
"这件事(具体细节请参看 <xref linkend=\"create-floppy\"/> )。既然您将会弄出好几"
"张软盘，不妨给它们做上标签吧。"

#. Tag: title
#: installation-howto.xml:131
#, no-c-format
msgid "USB memory stick"
msgstr "U 盘"

#. Tag: para
#: installation-howto.xml:132
#, no-c-format
msgid ""
"It's also possible to install from removable USB storage devices. For "
"example a USB keychain can make a handy Debian install medium that you can "
"take with you anywhere."
msgstr ""
"我们也可以从移动 USB 存储设备来安装系统。比如说您带着一个 USB 的钥匙链走遍天"
"涯海角的同时，它还可以成为方便称手的 Debian 安装介质。"

#. Tag: para
#: installation-howto.xml:138
#, no-c-format
msgid ""
"The easiest way to prepare your USB memory stick is to download <filename>hd-"
"media/boot.img.gz</filename>, and use gunzip to extract the 128 MB image "
"from that file. Write this image directly to your memory stick, which must "
"be at least 128 mb in size. Of course this will destroy anything already on "
"the memory stick. Then mount the memory stick, which will now have a FAT "
"filesystem on it. Next, download a Debian netinst CD image, and copy that "
"file to the memory stick; any filename is ok as long as it ends in <literal>."
"iso</literal>."
msgstr ""
"要把您的 U 盘做成安装盘，最简单的办法就是下载 <filename>hd-media/boot.img."
"gz</filename>，然后用 gunzip 把这个文件解压，生成 128 MB 的映像文件。再把生成"
"的映像文件直接写到 U盘。对了，这个 U 盘的容量至少要有 128 mb。当然了，上面所"
"说的操作会把 U 盘里的原有数据全部毁掉。以后再挂载这个 U 盘的话，它上面就不再"
"是 FAT 文件系统了。写完 U 盘后，接着要下载一个 Debian netinst CD 映像文件，再"
"把这个映像拷贝到 U 盘里。哪个映像文件都可以用，只要它的文件名是 <literal>."
"iso</literal> 结尾的就行。"

#. Tag: para
#: installation-howto.xml:149
#, no-c-format
msgid ""
"There are other, more flexible ways to set up a memory stick to use the "
"debian-installer, and it's possible to get it to work with smaller memory "
"sticks. For details, see <xref linkend=\"boot-usb-files\"/>."
msgstr ""
"除此之外，还有其它更为灵活的办法可以做出能启动 debian-installer 的 U 盘，同时"
"也是有办法适用于较小容量的 U 盘的。欲知详情，请看 <xref linkend=\"boot-usb-"
"files\"/>。"

#. Tag: para
#: installation-howto.xml:155
#, no-c-format
msgid ""
"Some BIOSes can boot USB storage directly, and some cannot. You may need to "
"configure your BIOS to boot from a <quote>removable drive</quote> or even a "
"<quote>USB-ZIP</quote> to get it to boot from the USB device. For helpful "
"hints and details, see <xref linkend=\"usb-boot\"/>."
msgstr "有些 BIOS 支持直接从 USB 的存储设备启动，有些不行。您或许需要设置一下 BIOS 让您的机器从 <quote>removable drive</quote> 或是 <quote>USB-ZIP</quote> 启动，以使电脑能从 USB 设备引导。参阅 <xref linkend=\"usb-boot\"/>，查看一些有用的提示和具体的细节说明。"

#. Tag: para
#: installation-howto.xml:162
#, no-c-format
msgid ""
"Booting Macintosh systems from USB storage devices involves manual use of "
"Open Firmware. For directions, see <xref linkend=\"usb-boot\"/>."
msgstr ""
"从 Macintosh 系统上使用 USB 存储设备与使用 Open Fireware 相关。相关指导见 "
"<xref linkend=\"usb-boot\"/>。"

#. Tag: title
#: installation-howto.xml:171
#, no-c-format
msgid "Booting from network"
msgstr "从网络启动"

#. Tag: para
#: installation-howto.xml:172
#, no-c-format
msgid ""
"It's also possible to boot &d-i; completely from the net. The various "
"methods to netboot depend on your architecture and netboot setup. The files "
"in <filename>netboot/</filename> can be used to netboot &d-i;."
msgstr ""
"要完全从网络上启动(即 netboot) &d-i; 也是可行的。而具体采取哪种方法来从网络启"
"动，这取决于您的硬件架构和网络启动的相关设置。在 <filename>netboot/</"
"filename> 目录里的文件是用来从网络启动 &d-i; 的。"

#. Tag: para
#: installation-howto.xml:178
#, no-c-format
msgid ""
"The easiest thing to set up is probably PXE netbooting. Untar the file "
"<filename>netboot/pxeboot.tar.gz</filename> into <filename>/var/lib/"
"tftpboot</filename> or wherever is appropriate for your tftp server. Set up "
"your DHCP server to pass filename <filename>/pxelinux.0</filename> to "
"clients, and with luck everything will just work. For detailed instructions, "
"see <xref linkend=\"install-tftp\"/>."
msgstr ""
"最简单的建立方式是使用 PXE 的网络启动。解开 <filename>netboot/pxeboot.tar."
"gz</filename> 文件，把它放到 <filename>/var/lib/tftpboot</filename>，或者放到"
"您的 tftp 服务器所使用的目录。然后再建立 DHCP 服务器，传送 <filename>/"
"pxelinux.0</filename> 这个文件名给客户端。老天保佑的话，就能顺利安装了。若要"
"知道详细的操作步骤，请参阅 <xref linkend=\"install-tftp\"/>。"

#. Tag: title
#: installation-howto.xml:192
#, no-c-format
msgid "Booting from hard disk"
msgstr "从硬盘启动"

#. Tag: para
#: installation-howto.xml:193
#, no-c-format
msgid ""
"It's possible to boot the installer using no removable media, but just an "
"existing hard disk, which can have a different OS on it. Download "
"<filename>hd-media/initrd.gz</filename>, <filename>hd-media/vmlinuz</"
"filename>, and a Debian CD image to the top-level directory of the hard "
"disk. Make sure that the CD image has a filename ending in <literal>.iso</"
"literal>. Now it's just a matter of booting linux with the initrd. <phrase "
"arch=\"i386\"> <xref linkend=\"boot-initrd\"/> explains one way to do it. </"
"phrase>"
msgstr ""
"除了从移动介质启动安装套件，其实从手中现有的安装了其它操作系統的硬盘启动也是"
"可行的。把 <filename>hd-media/initrd.gz</filename>、<filename>hd-media/"
"vmlinuz</filename> 和一个 Debian CD 映像文件下载到硬盘最底层的目录里。请确保"
"这个 CD 映像文件的文件名是以 <literal>.iso</literal> 结尾的。接下来的问题就是"
"用 initrd 启动 linux 了。<phrase arch=\"i386\"> <xref linkend=\"boot-initrd"
"\"/> 说明了如何做这件事。</phrase>"

#. Tag: title
#: installation-howto.xml:210
#, no-c-format
msgid "Installation"
msgstr "安装"

#. Tag: para
#: installation-howto.xml:211
#, no-c-format
msgid ""
"Once the installer starts, you will be greeted with an initial screen. Press "
"&enterkey; to boot, or read the instructions for other boot methods and "
"parameters (see <xref linkend=\"boot-parms\"/>). <phrase arch=\"i386\"> If "
"you want a 2.4 kernel, type <userinput>install24</userinput> at the "
"<prompt>boot:</prompt> prompt. <footnote><para> The 2.6 kernel is the "
"default for most boot methods, but is not available when booting from a "
"floppy. </para></footnote> </phrase>"
msgstr ""
"一旦安装套件开始运行后，会有一个初始画面迎接您。要启动的话，请按 &enterkey;；"
"或者先看一下其它的启动方式以及各种参数(参阅 <xref linkend=\"boot-parms\"/>)。"
"<phrase arch=\"i386\"> 如果您希望使用 2.4 的内核，在 <prompt>boot:</prompt> "
"提示符之后键入 <userinput>linux24</userinput>。<footnote><para> 在多数启动方"
"式下，默认使用 2.6 内核，但用软盘启动时 2.6 内核不可用。</para></footnote> </"
"phrase>"

#. Tag: para
#: installation-howto.xml:227
#, no-c-format
msgid ""
"After a while you will be asked to select your language. Use the arrow keys "
"to pick a language and press &enterkey; to continue. Next you'll be asked to "
"select your country, with the choices including countries where your "
"language is spoken. If it's not on the short list, a list of all the "
"countries in the world is available."
msgstr ""
"再过一会儿，您就会可以选择您所使用的语言了。用上下箭头键来选择一门语言，然后"
"摁 &enterkey; 继续下面的步骤。接下来，您要选择您的国家，选项里包括了那些使用"
"您所选语言的国家。如果在那个稍短的列表里找不到您要找的国家，还有一个含有世界"
"上所有国家的列表以备选择。"

#. Tag: para
#: installation-howto.xml:235
#, no-c-format
msgid ""
"You may be asked to confirm your keyboard layout. Choose the default unless "
"you know better."
msgstr ""
"您还可能被要求确认一下您的键盘布局(keyboard layout)。请选择缺省的那个，除非您"
"清楚更合适的布局。"

#. Tag: para
#: installation-howto.xml:240
#, no-c-format
msgid ""
"Now sit back while debian-installer detects some of your hardware, and loads "
"the rest of itself from CD, floppy, USB, etc."
msgstr ""
"现在可以坐下来，松口气，休息一下了。这时 debian-installer 会侦测您的一部分硬"
"件，并从 CD、软驱、USB 或其它设备里把它的其余部分加载进系统。"

#. Tag: para
#: installation-howto.xml:245
#, no-c-format
msgid ""
"Next the installer will try to detect your network hardware and set up "
"networking by DHCP. If you are not on a network or do not have DHCP, you "
"will be given the opportunity to configure the network manually."
msgstr ""
"接下来，安装程序会想办法侦测您和网络相关的硬件，再用 DHCP 完成网络的设置。如"
"果您没有连接网络，或是没有用 DHCP，那么您也可以手动配置网络。"

#. Tag: para
#: installation-howto.xml:251
#, no-c-format
msgid ""
"Now it is time to partition your disks. First you will be given the "
"opportunity to automatically partition either an entire drive, or free space "
"on a drive. This is recommended for new users or anyone in a hurry, but if "
"you do not want to autopartition, choose manual from the menu."
msgstr ""
"好，现在该对您的硬盘分区了。首先，您可以选择对整个驱动器或是驱动器上的空闲空"
"间进行自动分区。我们推荐新手或者手头有急事的朋友使用自动分区。不过要是您不想"
"用自动分区的话，请在菜单中选择手动分区。"

#. Tag: para
#: installation-howto.xml:258
#, no-c-format
msgid ""
"If you have an existing DOS or Windows partition that you want to preserve, "
"be very careful with automatic partitioning. If you choose manual "
"partitioning, you can use the installer to resize existing FAT or NTFS "
"partitions to create room for the Debian install: simply select the "
"partition and specify its new size."
msgstr ""
"如果您有一个 DOS 或 Windows 分区并想保留它，要小心使用自动分区。如果您选择手"
"动分区，可以使用安装程序重新设置 FAT 或 NTFS 分区的大小，分给 Debian 更多的安"
"装空间：只需选择该分区，并指定它的新尺寸。"

#. Tag: para
#: installation-howto.xml:265
#, no-c-format
msgid ""
"On the next screen you will see your partition table, how the partitions "
"will be formatted, and where they will be mounted. Select a partition to "
"modify or delete it. If you did automatic partitioning, you should just be "
"able to choose <guimenuitem>Finish partitioning and write changes to disk</"
"guimenuitem> from the menu to use what it set up. Remember to assign at "
"least one partition for swap space and to mount a partition on <filename>/</"
"filename>. <xref linkend=\"partitioning\"/> has more information about "
"partitioning."
msgstr "在接下来的屏幕上，您可以看到自己的分区表，各分区将以何种方式格式化，以及它们将来的挂载点在何处。选择一个分区进行修改或删除。如果您先前选择的是自动分区，那么现在只需从菜单选择 <guimenuitem>Finish partitioning and write changes to disk</guimenuitem>，使用其设置即可。请不要忘记至少需要分配一个分区作为交换空间，以及把一个分区挂载到 <filename>/</filename>上。<xref linkend=\"partitioning\"/> 有更多关于分区方面的信息。"

#. Tag: para
#: installation-howto.xml:275
#, no-c-format
msgid ""
"Now &d-i; formats your partitions and starts to install the base system, "
"which can take a while. That is followed by installing a kernel."
msgstr ""
"现在 &d-i; 会把您的分区格式化，然后安装基系统。这两步会花些时间。接着，它会安"
"装内核。"

#. Tag: para
#: installation-howto.xml:280
#, no-c-format
msgid ""
"The last step is to install a boot loader. If the installer detects other "
"operating systems on your computer, it will add them to the boot menu and "
"let you know. <phrase arch=\"i386\">By default GRUB will be installed to the "
"master boot record of the first harddrive, which is generally a good choice. "
"You'll be given the opportunity to override that choice and install it "
"elsewhere. </phrase>"
msgstr ""
"最后一步就是安装 boot loader 了。如果安装程序发现您的计算机还安装有其它的操作"
"系统，它会把它们加入启动菜单，并通知您。<phrase arch=\"i386\">缺省情况下会把 "
"GRUB 安装到第一块硬盘的引导记录上。一般来说，这样做没什么问题。您也可以不让它"
"这样做，而是把 GRUB 装在其它什么地方。</phrase>"

#. Tag: para
#: installation-howto.xml:290
#, no-c-format
msgid ""
"&d-i; will now tell you that the installation has finished. Remove the cdrom "
"or other boot media and hit &enterkey; to reboot your machine. It should "
"boot up into the next stage of the install process, which is explained in "
"<xref linkend=\"boot-new\"/>."
msgstr ""
"&d-i; 现在会告诉您安装已经完成了。把光盘从光驱里取出或者取下其它启动介质，然"
"后敲一下 &enterkey; 就可以重新启动您的机器了。重启后，它会进入安装过程的下一"
"个阶段，在 <xref linkend=\"boot-new\"/> 有对它的详尽说明。"

#. Tag: para
#: installation-howto.xml:297
#, no-c-format
msgid ""
"If you need more information on the install process, see <xref linkend=\"d-i-"
"intro\"/>."
msgstr "如果您想要更多的安装过程相关信息，请看 <xref linkend=\"d-i-intro\"/>。"

#. Tag: title
#: installation-howto.xml:306
#, no-c-format
msgid "Send us an installation report"
msgstr "请给我们发一份安装报告"

#. Tag: para
#: installation-howto.xml:307
#, no-c-format
msgid ""
"If you successfully managed an installation with &d-i;, please take time to "
"provide us with a report. The simplest way to do so is to install the "
"reportbug package (<command>apt-get install reportbug</command>), and run "
"<command>reportbug installation-report</command>."
msgstr ""
"如果您用 &d-i; 安装成功，请抽空给我们写一份报告。有一个最简单的方法，即安装 "
"report bug 软件包(<command>apt-get install reportbug</command>)，然后执行"
"<command>reportbug installation-report</command>。"

#. Tag: para
#: installation-howto.xml:315
#, no-c-format
msgid ""
"If you did not complete the install, you probably found a bug in debian-"
"installer. To improve the installer it is necessary that we know about them, "
"so please take the time to report them. You can use an installation report "
"to report problems; if the install completely fails, see <xref linkend="
"\"problem-report\"/>."
msgstr ""
"如果不能完成安装，那么您也许发现了一个 debian-installler 的错误。要改进安装程"
"序，就很有必要让我们知道这些异状，因此，请抽空把这些错误报告给我们。您可以使"
"用 installation report 来回报错误；如果安装彻底失败了，请参阅 <xref linkend="
"\"problem-report\"/>。"

#. Tag: title
#: installation-howto.xml:327
#, no-c-format
msgid "And finally.."
msgstr "末了……"

#. Tag: para
#: installation-howto.xml:328
#, no-c-format
msgid ""
"We hope that your Debian installation is pleasant and that you find Debian "
"useful. You might want to read <xref linkend=\"post-install\"/>."
msgstr ""
"我们祝愿您的 Debian 安装顺利愉快，并希望您能发现 Debian 在您这里的用武之地。"
"还有您也许可以读一下 <xref linkend=\"post-install\"/>。"