# Debian GNU/Linux Installation Guide - translation into Chinese (simplified)
# Ji YongGang <jungleji@gmail.com>, 2012.
# tao wang <tonywang5@163.com>, 2020.
# Liao junchao <liaojunchao@outlook.com>, 2021.
# 吕文彬 <wenbin816@gmail.com>, 2021.
#
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2023-08-30 23:04+0000\n"
"PO-Revision-Date: 2023-09-04 20:49+0000\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 5.0.1-dev\n"

#. Tag: title
#: install-methods.xml:5
#, no-c-format
msgid "Obtaining System Installation Media"
msgstr "获取系统安装介质"

#. Tag: title
#: install-methods.xml:12
#, no-c-format
msgid "Official &debian-gnu; installation images"
msgstr "官方的 &debian-gnu; 安装映像"

#. Tag: para
#: install-methods.xml:13
#, no-c-format
msgid ""
"By far the easiest way to install &debian-gnu; is from a set of official "
"&debian; installation images. You can buy a set of CDs/DVDs from a vendor "
"(see the <ulink url=\"&url-debian-cd-vendors;\">CD vendors page</ulink>). "
"You may also download the installation images from a &debian; mirror and "
"make your own set, if you have a fast network connection and a CD/DVD burner "
"(see the <ulink url=\"&url-debian-cd;\">Debian CD/DVD page</ulink> and "
"<ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> for detailed "
"instructions). If you have such optical installation media, and they are "
"bootable on your machine<phrase arch=\"x86\">, which is the case on all "
"modern PCs</phrase>, you can skip right to <xref linkend=\"boot-installer\"/"
">. Much effort has been expended to ensure the most-used files are on the "
"first CD and DVD image, so that a basic desktop installation can be done "
"with only the first DVD or - to a limited extent - even with only the first "
"CD image."
msgstr ""
"目前安装 &debian-gnu; 最容易的方法是使用一组官方的 &debian; 安装映像。可以从"
"一个销售商处购买一组CDs/DVDs（参见<ulink url=\"&url-debian-cd-vendors;\">CD "
"销售商</ulink>）。如果有高速网络和 CD/DVD 刻录机，可以选择从 &debian; 镜像站"
"点下载安装映像，然后自己刻录(参见 <ulink url=\"&url-debian-cd;\">Debian CD/"
"DVD 页</ulink>和 <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> 了"
"解详细说明)。如果您已经有这样的光盘安装介质，并能在机器上引导它们，大多数现"
"代 PC 都适用<phrase arch=\"x86\">，这是在所有现代 PCs 的情况</phrase>，可以直"
"接跳到 <xref linkend=\"boot-installer\"/>。我们尽力让最常用的文件包含在第一"
"个 CD 和 DVD 映像中，所以只使用第一张 DVD 就能完成基本的桌面安装，或者在有限"
"的范围内可以只使用第一个 CD 映像。"

#. Tag: para
#: install-methods.xml:30
#, no-c-format
msgid ""
"As CDs have a rather limited capacity by today's standards, not all "
"graphical desktop environments are installable with only the first CD; for "
"some desktop environments a CD installation requires either network "
"connectivity during the installation to download the remaining files or "
"additional CDs."
msgstr ""
"由于当前标准对 CD 容量的限制，不是所有的桌面图形环境都能装到第一张 CD 里面；"
"有些桌面环境 CD 安装方式要么通过网络连接下载其他文件要么使用额外的 CD。"

#. Tag: para
#: install-methods.xml:38
#, no-c-format
msgid ""
"Also, keep in mind: if the installation media you are using don't contain "
"some packages you need, you can always install those packages afterwards "
"from your running new Debian system (after the installation has finished). "
"If you need to know on which installation image to find a specific package, "
"visit <ulink url=\"https://cdimage-search.debian.org/\">https://cdimage-"
"search.debian.org/</ulink>."
msgstr ""
"同样，要记住：如果使用的安装介质不包括需要的软件包的话，总是可以以后从运行的"
"新 Debian 系统来安装这些软件包（在安装结束后）。如果需要知道在哪个安装映像找"
"到特定的软件包，请访问<ulink url=\"https://cdimage-search.debian.org/"
"\">https://cdimage-search.debian.org/</ulink>。"

#. Tag: para
#: install-methods.xml:46
#, no-c-format
msgid ""
"If your machine doesn't support booting from optical media<phrase arch="
"\"x86\"> (only relevant on very old PC systems)</phrase>, but you do have a "
"set of CD/DVD, you can use an alternative strategy such as <phrase arch="
"\"s390\">VM reader,</phrase> <phrase condition=\"bootable-disk\">hard disk,</"
"phrase> <phrase condition=\"bootable-usb\">usb stick,</phrase> <phrase "
"condition=\"supports-tftp\">net boot,</phrase> or manually loading the "
"kernel from the disc to initially boot the system installer. The files you "
"need for booting by another means are also on the disc; the &debian; network "
"archive and folder organization on the disc are identical. So when archive "
"file paths are given below for particular files you need for booting, look "
"for those files in the same directories and subdirectories on your "
"installation media."
msgstr ""
"如果您的机器不支持从光盘媒介引导<phrase arch=\"x86\"> (仅限于非常古老的 PC 系"
"统)</phrase>，但您有一套 CD/DVD，可以使用替代的方案，例如：<phrase arch="
"\"s390\">VM 读取器、</phrase> <phrase condition=\"bootable-disk\">硬盘、</"
"phrase> <phrase condition=\"bootable-usb\">U 盘、</phrase> <phrase condition="
"\"supports-tftp\">网络引导、</phrase> 或者从光盘手工装载内核来初始化系统安装"
"程序。光盘的里已经包含了用其他方法引导所需的文件；&debian; 网络存档和文件夹组"
"织方式相同。因此当引导需要特定的文件时，可以从安装媒介的相同目录和子目录中找"
"到。"

#. Tag: para
#: install-methods.xml:67
#, no-c-format
msgid ""
"Once the installer is booted, it will be able to obtain all the other files "
"it needs from the disc."
msgstr "一旦安装程序被引导，它将能够获得光盘中其他所有必需的文件。"

#. Tag: para
#: install-methods.xml:72
#, no-c-format
msgid ""
"If you don't have an installation media set, then you will need to download "
"the installer system files and place them on the <phrase arch=\"s390\">VM "
"minidisk</phrase> <phrase condition=\"bootable-disk\">hard disk or</phrase> "
"<phrase condition=\"bootable-usb\">usb stick or</phrase> <phrase condition="
"\"supports-tftp\">a connected computer</phrase> so they can be used to boot "
"the installer."
msgstr ""
"如果您没有安装介质，则需要下载安装程序系统文件并且把它们放到<phrase arch="
"\"s390\"> VM minidisk</phrase> <phrase condition=\"bootable-disk\">硬盘或</"
"phrase> <phrase condition=\"bootable-usb\">U 盘或</phrase> <phrase condition="
"\"supports-tftp\">一台联网的计算机上</phrase>，然后它们可以被用来引导安装程"
"序。"

#. Tag: title
#: install-methods.xml:96
#, no-c-format
msgid "Downloading Files from &debian; Mirrors"
msgstr "从 &debian; 镜像服务器下载文件"

#. Tag: para
#: install-methods.xml:98
#, no-c-format
msgid ""
"To find the nearest (and thus probably the fastest) mirror, see the <ulink "
"url=\"&url-debian-mirrors;\">list of &debian; mirrors</ulink>."
msgstr ""
"选择离您较近的(因此很可能也是最快的)镜像服务器，请参见 <ulink url=\"&url-"
"debian-mirrors;\">&debian; 镜像列表</ulink>。"

#. Tag: title
#: install-methods.xml:106
#, no-c-format
msgid "Where to Find Installation Files"
msgstr "在哪里能找到安装文件"

#. Tag: para
#: install-methods.xml:108
#, no-c-format
msgid ""
"Various installation files can be found on each &debian; mirror in the "
"directory <ulink url=\"&url-debian-installer;images\">debian/dists/"
"&releasename;/main/installer-&architecture;/current/images/</ulink> &mdash; "
"the <ulink url=\"&url-debian-installer;images/MANIFEST\">MANIFEST</ulink> "
"lists each image and its purpose."
msgstr ""
"各种安装文件可以在每个 &debian; 镜像的 <ulink url=\"&url-debian-installer;"
"images\">debian/dists/&releasename;/main/installer-&architecture;/current/"
"images/</ulink> 中找到；<ulink url=\"&url-debian-installer;images/MANIFEST"
"\">MANIFEST</ulink> 文件列出了每一个映像及其用途。"

#. Tag: title
#: install-methods.xml:120
#, no-c-format
msgid "Kurobox Pro Installation Files"
msgstr "Kurobox Pro 安装文件"

#. Tag: para
#: install-methods.xml:121
#, no-c-format
msgid ""
"The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the "
"disk on which you intend to install &debian;. These images can be obtained "
"from &kuroboxpro-firmware-img;."
msgstr ""
"Kurobox Pro 需要内核和 ramdisk，位于您打算安装 &debian; 的 ext2 磁盘分区上。"
"这些映象可以从 &kuroboxpro-firmware-img; 获得。"

#. Tag: title
#: install-methods.xml:131
#, no-c-format
msgid "HP mv2120 Installation Files"
msgstr "HP mv2120 安装文件"

#. Tag: para
#: install-methods.xml:132
#, no-c-format
msgid ""
"A firmware image is provided for the HP mv2120 which will automatically boot "
"<classname>debian-installer</classname>. This image can be installed with "
"uphpmvault on Linux and other systems and with the HP Media Vault Firmware "
"Recovery Utility on Windows. The firmware image can be obtained from &mv2120-"
"firmware-img;."
msgstr ""
"HP mv2120 的固件映象能自动引导 <classname>debian-installer</classname>。该映"
"象在 Linux 和其他系统上可以用 uphpmvault 安装。Windows 上可以使用 HP Media "
"Vault Firmware Recovery Utility 安装。可以从 &mv2120-firmware-img; 获得此固件"
"映象。"

#. Tag: title
#: install-methods.xml:144
#, no-c-format
msgid "QNAP Turbo Station Installation Files"
msgstr "QNAP Turbo Station 安装文件"

#. Tag: para
#: install-methods.xml:145
#, no-c-format
msgid ""
"The installation files for the QNAP Turbo Station consist of a kernel and "
"ramdisk as well as a script to write these images to flash. You can obtain "
"the installation files for QNAP TS-11x/TS-12x, HS-210, TS-21x/TS-22x and "
"TS-41x/TS-42x models from &qnap-kirkwood-firmware-img;."
msgstr ""
"QNAP Turbo Station 安装文件包括内核和 ramdisk，以及将这些映像写入 flash 的脚"
"本。QNAP TS-11x/TS-12x、HS-210、TS-21x/TS-22x 和 TS-41x/TS-42x 型号安装文件可"
"以从 &qnap-kirkwood-firmware-img; 取得。"

#. Tag: title
#: install-methods.xml:156
#, no-c-format
msgid "Plug Computer and OpenRD Installation Files"
msgstr "Plug Computer 和 OpenRD 安装文件"

#. Tag: para
#: install-methods.xml:157
#, no-c-format
msgid ""
"The installation files for plug computers (SheevaPlug, GuruPlug, DreamPlug "
"etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can "
"obtain these files from &kirkwood-marvell-firmware-img;."
msgstr ""
"plug computers (SheevaPlug、GuruPlug、DreamPlug 等) 和 OpenRD 设备的安装文件"
"包含对应 U-Boot 的内核和 initrd。您可以从 &kirkwood-marvell-firmware-img; 取"
"得这些文件。"

#. Tag: title
#: install-methods.xml:167
#, no-c-format
msgid "LaCie NASes Installation Files"
msgstr "LaCie NASes 安装文件"

#. Tag: para
#: install-methods.xml:168
#, no-c-format
msgid ""
"The installation files for LaCie NASes (Network Space v2, Network Space Max "
"v2, Internet Space v2, d2 Network v2, 2Big Network v2 and 5Big Network v2) "
"consist of a kernel and initrd for U-Boot. You can obtain these files from "
"&lacie-kirkwood-firmware-img;."
msgstr ""
"LaCie NASes (Network Space v2、Network Space Max v2、Internet Space v2、d2 "
"Network v2、2Big Network v2 和 5Big Network v2) 安装文件含有用于 U-Boot 的内"
"核和 initrd。您可以从 &lacie-kirkwood-firmware-img; 获取这些文件。"

#. Tag: title
#: install-methods.xml:179
#, no-c-format
msgid "Armhf Multiplatform Installation Files"
msgstr "Armhf 多平台安装文件"

#. Tag: para
#: install-methods.xml:180
#, no-c-format
msgid ""
"The installation files for systems supported by the armhf multiplatform "
"kernel (see <xref linkend=\"armhf-armmp-supported-platforms\"/>) consist of "
"a standard Linux kernel image, a standard Linux initial ramdisk image and a "
"system-specific device-tree blob. The kernel and the initial ramdisk image "
"for tftp-booting can be obtained from &armmp-firmware-img; and the device-"
"tree blob can be obtained from &armmp-dtb-img;. The tar archive for creating "
"a bootable USB stick with the installer can be obtained from &armmp-hd-media-"
"tarball;."
msgstr ""
"由 armhf 多平台内核（请参见 <xref linkend=\"armhf-armmp-supported-platforms"
"\"/>）支持的系统的安装文件包括 Lixux 内核映像、标准 Linux 初始虚拟硬盘映像和"
"基于系统的设备树 blob。用于 tftp 引导的内核和初始虚拟硬盘映像可以从 &armmp-"
"firmware-img; 中得到，而设备树 blog 可以从 &armmp-dtb-img; 得到。生成带有安装"
"程序的可引导 U 盘的 tar 档案可以从 &armmp-hd-media-tarball; 得到。"

#. Tag: para
#: install-methods.xml:192
#, no-c-format
msgid ""
"U-boot images for various armhf platforms are available at &armmp-uboot-img;."
msgstr "各个 armhf 平台的 U-boot 映像可以在 &armmp-uboot-img; 得到。"

#. Tag: title
#: install-methods.xml:238
#, no-c-format
msgid "Preparing Files for USB Memory Stick Booting"
msgstr "为从 U 盘引导准备文件"

#. Tag: para
#: install-methods.xml:240
#, no-c-format
msgid ""
"To prepare the USB stick, we recommend to use a system where GNU/Linux is "
"already running and where USB is supported. With current GNU/Linux systems "
"the USB stick should be automatically recognized when you insert it. If it "
"is not you should check that the usb-storage kernel module is loaded. When "
"the USB stick is inserted, it will be mapped to a device named <filename>/"
"dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
"You should be able to see to which device the USB stick was mapped by "
"running the command <command>lsblk</command> before and after inserting it. "
"(The output of <command>dmesg</command> (as root) is another possible method "
"for that.) To write to your stick, you may have to turn off its write "
"protection switch."
msgstr ""
"为了准备 U 盘，推荐使用一台正在运行的支持 USB 的 GNU/Linux 系统。当前的 GNU/"
"Linux 系统会在您插入 U 盘的时候自动识别。如果没有，您应该确认 usb-storage 内"
"核模块是否已经被加载。U 盘插入后，它将被映射到名为 <filename>/dev/sdX</"
"filename> 的设备，其中的 <quote>X</quote> 是 a-z 的字母。您可以通过在插入 U "
"盘前后运行 <command>lsblk</command> 命令来查看 U 盘被映射到哪个设备名。（查"
"看 <command>dmesg</command> 命令的输出（以 root 用户运行）也是一种方法。）要"
"写入信息，您需要先关闭 U 盘的写保护开关。"

#. Tag: para
#: install-methods.xml:255
#, no-c-format
msgid ""
"The procedures described in this section will destroy anything already on "
"the device! Make very sure that you use the correct device name for your USB "
"stick. If you use the wrong device the result could be that all information "
"on, for example, a hard disk is lost."
msgstr ""
"采用这种方法将销毁设备上已有的任何内容！请确认您使用了正确的 U 盘设备名。如果"
"搞错，比如写成硬盘，将造成该设备上的所有信息丢失。"

#. Tag: title
#: install-methods.xml:265
#, no-c-format
msgid "Preparing a USB stick using a hybrid CD/DVD image"
msgstr "使用混合 CD/DVD 映像制作 U 盘"

#. Tag: para
#: install-methods.xml:266
#, no-c-format
msgid ""
"Debian installation images for this architecture are created using the "
"<command>isohybrid</command> technology; that means they can be written "
"directly to a USB stick, which is a very easy way to make an installation "
"media. Simply choose an image (such as the netinst, CD or DVD-1) that will "
"fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
"installation image."
msgstr ""
"针对此架构的 Debian安装映像是采用 <command>isohybrid</command> 技术创建的，这"
"意味着它们可以被直接写入 U 盘，这是非常简单的制作安装介质的方法。只需为 U 盘"
"选择一个大小合适的映像（如 netint、CD 或 DVD-1）。参阅 <xref linkend="
"\"official-cdrom\"/> 获取安装映像。"

#. Tag: para
#: install-methods.xml:276
#, no-c-format
msgid ""
"The installation image you choose should be written directly to the USB "
"stick, overwriting its current contents. For example, when using an existing "
"GNU/Linux system, the image file can be written to a USB stick as follows, "
"after having made sure that the stick is unmounted: "
"<informalexample><screen>\n"
"<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /dev/"
"<replaceable>sdX</replaceable></userinput>\n"
"<prompt>#</prompt> <userinput>sync</userinput>\n"
"</screen></informalexample> Simply writing the installation image to USB "
"like this should work fine for most users. For special needs there is this "
"<ulink url=\"https://wiki.debian.org/DebianInstaller/CreateUSBMedia\">wiki "
"page</ulink>."
msgstr ""
"您选中的安装映像应该被直接写入 U 盘，覆盖它当前的内容。例如，使用已有的 GNU/"
"Linux 系统，映像文件可以参照下面方法写入 U 盘，写之前请确认 U 盘已经卸载： "
"<informalexample><screen>\n"
"<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /dev/"
"<replaceable>sdX</replaceable></userinput>\n"
"<prompt>#</prompt> <userinput>sync</userinput>\n"
"</screen></informalexample>对大多数用户来说，简单地把安装映像写入 U 盘已经够"
"用。如果您有特殊需求，请阅读此<ulink url=\"https://wiki.debian.org/"
"DebianInstaller/CreateUSBMedia\">维基页面</ulink>。"

#. Tag: para
#: install-methods.xml:289
#, no-c-format
msgid ""
"Information about how to do this on other operating systems can be found in "
"the <ulink url=\"&url-debian-cd-faq-write-usb;\">Debian CD FAQ</ulink>."
msgstr ""
"在其它操作系统上如何做的信息可以在<ulink url=\"&url-debian-cd-faq-write-usb;"
"\">Debian CD FAQ</ulink>中找到。"

#. Tag: para
#: install-methods.xml:294
#, no-c-format
msgid ""
"The image must be written to the whole-disk device and not a partition, e."
"g. /dev/sdb and not /dev/sdb1. Do not use tools like <command>unetbootin</"
"command> which alter the image."
msgstr ""
"映像必须写入整个盘设备上而不是分区上，例如 /dev/sdb 而不是 /dev/sdb1。不要使"
"用 <command>unetbootin</command> 的工具，它会更改映像。"

#. Tag: title
#: install-methods.xml:311
#, no-c-format
msgid "Preparing Files for Hard Disk Booting"
msgstr "为从硬盘引导准备文件"

#. Tag: para
#: install-methods.xml:312
#, no-c-format
msgid ""
"The installer may be booted using boot files placed on an existing hard "
"drive partition, either launched from another operating system or by "
"invoking a boot loader directly from the BIOS. On modern UEFI systems, the "
"kernel may be booted directly from the UEFI partition without the need of a "
"boot loader."
msgstr ""
"安装程序可以从硬盘分区上面用引导文件引导。它们可以在其它操作系统下面启动，或"
"者直接使用 BIOS 提供的引导装载程序直接启动。在现代的 UEFI 系统上，内核可以直"
"接从 UEFI 分区引导，而无需引导程序。"

#. Tag: para
#: install-methods.xml:320
#, no-c-format
msgid ""
"A full, <quote>pure network</quote> installation can be achieved using this "
"technique. This avoids all hassles of removable media, like finding and "
"burning CD/DVD images."
msgstr ""
"采用这个技术可以实现完全的<quote>纯网络</quote>的安装方式。这样可以避免一些使"
"用可移动介质带来的的缺点，比如寻找和刻录 CD/DVD 映像。"

#. Tag: title
#: install-methods.xml:350
#, no-c-format
msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
msgstr "硬盘安装程序从 Linux 引导使用 <command>GRUB</command>"

#. Tag: para
#: install-methods.xml:352
#, no-c-format
msgid ""
"This section explains how to add to or even replace an existing linux "
"installation using <command>GRUB</command>."
msgstr ""
"这一节将解释如何增加或者甚至替换现有的 linux 安装，通过<command>GRUB</"
"command>。"

#. Tag: para
#: install-methods.xml:358
#, no-c-format
msgid ""
"At boot time, <command>GRUB</command> supports loading in memory not only "
"the kernel, but also a disk image. This RAM disk can be used as the root "
"file-system by the kernel."
msgstr ""
"在启动时，<command>GRUB</command> 支持将内核和磁盘映像加载到内存中。这个内存"
"虚拟磁盘可以被用做内核的根文件系统。"

#. Tag: para
#: install-methods.xml:364
#, no-c-format
msgid ""
"Copy the following files from the &debian; archives to a convenient location "
"on your hard drive, for instance to <filename>/boot/newinstall/</filename>."
msgstr ""
"将以下文件从 &debian; 存档中复制到硬盘中比较方便的地方，比如 <filename>/boot/"
"newinstall/</filename>。"

#. Tag: para
#: install-methods.xml:371
#, no-c-format
msgid "<filename>vmlinuz</filename> (kernel binary)"
msgstr "<filename>vmlinuz</filename>(内核二进制文件)"

#. Tag: para
#: install-methods.xml:376
#, no-c-format
msgid "<filename>initrd.gz</filename> (ramdisk image)"
msgstr "<filename>initrd.gz</filename> (内存虚拟磁盘映像)"

#. Tag: para
#: install-methods.xml:383
#, no-c-format
msgid ""
"If you intend to use the hard drive only for booting and then download "
"everything over the network, you should download the &x86-netboot-initrd; "
"file and its corresponding kernel &x86-netboot-linux;. This will allow you "
"to repartition the hard disk from which you boot the installer, although you "
"should do so with care."
msgstr ""
"如果您只愿意使用硬盘引导，然后从网络下载其他文件，需要下载 &x86-netboot-"
"initrd; 文件及其对应的内核 &x86-netboot-linux;。这将允许您重新分区用于引导的"
"硬盘，需要小心操作。"

#. Tag: para
#: install-methods.xml:392
#, no-c-format
msgid ""
"Alternatively, if you intend to keep an existing partition on the hard drive "
"unchanged during the install, you can download the &x86-hdmedia-initrd; file "
"and its kernel &x86-hdmedia-vmlinuz;, as well as copy an installation image "
"to the hard drive (make sure the file is named ending in <literal>.iso</"
"literal>). The installer can then boot from the hard drive and install from "
"the installation image, without needing the network."
msgstr ""
"另一种方法，可以在安装时保持原硬盘的分区不变，您需要下载 &x86-hdmedia-"
"initrd; 文件以及对应的内核 &x86-hdmedia-vmlinuz;，还需要将安装文件复制到硬盘"
"上（确认文件名是以 <literal>.iso</literal> 结尾的）。这样安装程序就可以从硬盘"
"引导，并从安装映像上安装，而无需使用网络。"

#. Tag: para
#: install-methods.xml:400
#, no-c-format
msgid ""
"Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
"\"/>."
msgstr "最后，要配置 bootloader，请进入 <xref linkend=\"boot-initrd\"/>。"

#. Tag: title
#: install-methods.xml:415
#, no-c-format
msgid "Preparing Files for TFTP Net Booting"
msgstr "为使用 TFTP 网络引导准备文件"

#. Tag: para
#: install-methods.xml:416
#, no-c-format
msgid ""
"If your machine is connected to a local area network, you may be able to "
"boot it over the network from another machine, using TFTP. If you intend to "
"boot the installation system from another machine, the boot files will need "
"to be placed in specific locations on that machine, and the machine "
"configured to support booting of your specific machine."
msgstr ""
"如果您的机器连接到了一个局域网，您可以从网络上的另外一台机器上面通过 TFTP 来"
"引导它。如果您倾向从另外一台机器上面引导安装系统，则引导文件需要放在那台机器"
"上面的某个特殊地方，并且配置好能够支持对您的机器进行引导。"

#. Tag: para
#: install-methods.xml:424
#, no-c-format
msgid ""
"You need to set up a TFTP server, and for many machines a DHCP server<phrase "
"condition=\"supports-rarp\">, or RARP server</phrase><phrase condition="
"\"supports-bootp\">, or BOOTP server</phrase>."
msgstr ""
"您需要设置一台 TFTP 服务器，并且对于很多机器来说，还需要一台 DHCP 服务器"
"<phrase condition=\"supports-rarp\">，或 RARP 服务器</phrase> <phrase "
"condition=\"supports-bootp\">，或 BOOTP 服务器</phrase>。"

#. Tag: para
#: install-methods.xml:431
#, no-c-format
msgid ""
"<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
"(RARP) is one way to tell your client what IP address to use for itself. "
"Another way is to use the BOOTP protocol.</phrase> <phrase condition="
"\"supports-bootp\">BOOTP is an IP protocol that informs a computer of its IP "
"address and where on the network to obtain a boot image.</phrase> The DHCP "
"(Dynamic Host Configuration Protocol) is a more flexible, backwards-"
"compatible extension of BOOTP. Some systems can only be configured via DHCP."
msgstr ""
"<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
"(RARP) 是一种告诉您的客户机它自己 IP 地址的方法。另外一种方法是采用 BOOTP 协"
"议。</phrase> <phrase condition=\"supports-bootp\">BOOTP 是一种 IP 协议，用来"
"告诉一台计算机它自己 IP 地址以及从网络何处获得启动映像。</phrase> DHCP "
"(Dynamic Host Configuration Protocol) 是一个更灵活，向后兼容的 BOOTP 扩展。有"
"些系统只能通过 DHCP 来配置。"

#. Tag: para
#: install-methods.xml:457
#, no-c-format
msgid ""
"The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
"the client. Theoretically, any server, on any platform, which implements "
"these protocols, may be used. In the examples in this section, we shall "
"provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux."
msgstr ""
"普通文件传输协议(Trivial File Transfer Protocol (TFTP))被用于为客户提供引导映"
"像。理论上，任意服务器，在任意平台上只要实现了这些协议就都能够被应用。在这一"
"节的一些例子里面，我们将提供在 SunOS 4.x、SunOS 5.x (即 Solaris) 和 GNU/"
"Linux 上面的一些操作例子。"

#. Tag: para
#: install-methods.xml:465
#, no-c-format
msgid ""
"For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
"It's written by the same author as the <classname>syslinux</classname> "
"bootloader and is therefore least likely to cause issues. A good alternative "
"is <classname>atftpd</classname>."
msgstr ""
"对于 &debian-gnu; 服务器，我们推荐使用 <classname>tftpd-hpa</classname>。它"
"由 <classname>syslinux</classname> bootloader 的同一作者开发，因此不会导致很"
"多问题。另一个好的选择是 <classname>atftpd</classname>。"

#. Tag: title
#: install-methods.xml:481
#, no-c-format
msgid "Setting up RARP server"
msgstr "设置 RARP 服务器"

#. Tag: para
#: install-methods.xml:482
#, no-c-format
msgid ""
"To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
"address) of the client computers to be installed. If you don't know this "
"information, you can boot into <quote>Rescue</quote> mode and use the "
"command <userinput>ip addr show dev eth0</userinput>."
msgstr ""
"为了设置 RARP，需要知道需要安装系统的客户机以太网卡地址(网卡 MAC 地址)。如果"
"您还不知道这个信息，可以启动进入<quote>Rescue</quote> 模式，并使用 "
"<userinput>ip addr show dev eth0</userinput> 命令。"

#. Tag: para
#: install-methods.xml:491
#, no-c-format
msgid ""
"On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
"<command>rarpd</command> program. You need to ensure that the Ethernet "
"hardware address for the client is listed in the <quote>ethers</quote> "
"database (either in the <filename>/etc/ethers</filename> file, or via NIS/NIS"
"+) and in the <quote>hosts</quote> database. Then you need to start the RARP "
"daemon. Issue the command (as root): <userinput>/usr/sbin/rarpd -a</"
"userinput> on most Linux systems and SunOS 5 (Solaris 2), <userinput>/usr/"
"sbin/in.rarpd -a</userinput> on some other Linux systems, or <userinput>/usr/"
"etc/rarpd -a</userinput> in SunOS 4 (Solaris 1)."
msgstr ""
"在一个使用 Linux 内核的 RARP 服务器系统，或者 Solaris/SunOS 上，使用 "
"<command>rarpd</command> 程序。您需要确定客户机的以太网硬件地址已经列在 "
"<quote>ethers</quote> 数据库(可以在 <filename>/etc/ethers</filename> 文件中或"
"通过 NIS/NIS+)和 <quote>hosts</quote> 数据库中，然后您需要启动 RARP 守护程"
"序。使用(以 root 身份)：在多数 Linux 系统和 SunOS 5 (Solaris 2) 上使用 "
"<userinput>/usr/sbin/rarpd -a</userinput>，有些 Linux 系统上使用 <userinput>/"
"usr/sbin/in.rarpd -a</userinput> 命令，在 SunOS 4 (Solaris 1) 里，则使用 "
"<userinput>/usr/etc/rarpd -a</userinput> 命令。"

#. Tag: title
#: install-methods.xml:512
#, no-c-format
msgid "Setting up a DHCP server"
msgstr "设置 DHCP 服务器"

#. Tag: para
#: install-methods.xml:513
#, no-c-format
msgid ""
"One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
"gnu;, the <classname>isc-dhcp-server</classname> package is recommended. "
"Here is a sample configuration file for it (see <filename>/etc/dhcp/dhcpd."
"conf</filename>):"
msgstr ""
"一个 DHCP 服务器自由软件是 ISC <command>dhcpd</command>。对于 &debian-gnu;，"
"推荐使用 <classname>isc-dhcp-server</classname> 软件包。这里是它的一个简单的"
"配置示例文件(参阅 <filename>/etc/dhcp/dhcpd.conf</filename>)："

#. Tag: screen
#: install-methods.xml:520
#, no-c-format
msgid ""
"option domain-name \"example.com\";\n"
"option domain-name-servers ns1.example.com;\n"
"option subnet-mask 255.255.255.0;\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"server-name \"servername\";\n"
"\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option routers 192.168.1.1;\n"
"}\n"
"\n"
"host clientname {\n"
"  filename \"/tftpboot.img\";\n"
"  server-name \"servername\";\n"
"  next-server servername;\n"
"  hardware ethernet 01:23:45:67:89:AB;\n"
"  fixed-address 192.168.1.90;\n"
"}"
msgstr ""
"option domain-name \"example.com\";\n"
"option domain-name-servers ns1.example.com;\n"
"option subnet-mask 255.255.255.0;\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"server-name \"servername\";\n"
"\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option routers 192.168.1.1;\n"
"}\n"
"\n"
"host clientname {\n"
"  filename \"/tftpboot.img\";\n"
"  server-name \"servername\";\n"
"  next-server servername;\n"
"  hardware ethernet 01:23:45:67:89:AB;\n"
"  fixed-address 192.168.1.90;\n"
"}"

#. Tag: para
#: install-methods.xml:522
#, no-c-format
msgid ""
"In this example, there is one server <replaceable>servername</replaceable> "
"which performs all of the work of DHCP server, TFTP server, and network "
"gateway. You will almost certainly need to change the domain-name options, "
"as well as the server name and client hardware address. The "
"<replaceable>filename</replaceable> option should be the name of the file "
"which will be retrieved via TFTP."
msgstr ""
"在这个例子中，一台服务器 <replaceable>servername</replaceable> 负责执行包括 "
"DHCP 服务器、TFTP 服务器和网关在内的所有工作。您需要修改域名选项，以及服务器"
"名和客户端硬件地址。<replaceable>filename</replaceable> 选项应该是将要从 "
"TFTP 获取的文件名。"

#. Tag: para
#: install-methods.xml:532
#, no-c-format
msgid ""
"After you have edited the <command>dhcpd</command> configuration file, "
"restart it with <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
msgstr ""
"在编辑了 <command>dhcpd</command> 配置文件后，您需要使用下面的命令重新启动："
"<userinput>/etc/init.d/isc-dhcp-server restart</userinput>。"

#. Tag: title
#: install-methods.xml:540
#, no-c-format
msgid "Enabling PXE Booting in the DHCP configuration"
msgstr "在 DHCP 配置中打开 PXE 引导功能"

#. Tag: para
#: install-methods.xml:541
#, no-c-format
msgid ""
"Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
"boot Execution Environment (PXE) method of TFTP. <informalexample><screen>\n"
"option domain-name \"example.com\";\n"
"\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"\n"
"allow booting;\n"
"allow bootp;\n"
"\n"
"# The next paragraph needs to be modified to fit your case\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option broadcast-address 192.168.1.255;\n"
"# the gateway address which can be different\n"
"# (access to the internet for instance)\n"
"  option routers 192.168.1.1;\n"
"# indicate the dns you want to use\n"
"  option domain-name-servers 192.168.1.3;\n"
"}\n"
"\n"
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"pxelinux.0\";\n"
" }\n"
"}\n"
"</screen></informalexample> Note that for PXE booting, the client filename "
"<filename>pxelinux.0</filename> is a boot loader, not a kernel image (see "
"<xref linkend=\"tftp-images\"/> below)."
msgstr ""
"这里是另外一个采用 TFTP 的 Pre-boot Execution Environment (PXE) 方法的 "
"<filename>dhcp.conf</filename> 配置例子。<informalexample><screen>\n"
"option domain-name \"example.com\";\n"
"\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"\n"
"allow booting;\n"
"allow bootp;\n"
"\n"
"# The next paragraph needs to be modified to fit your case\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option broadcast-address 192.168.1.255;\n"
"# the gateway address which can be different\n"
"# (access to the internet for instance)\n"
"  option routers 192.168.1.1;\n"
"# indicate the dns you want to use\n"
"  option domain-name-servers 192.168.1.3;\n"
"}\n"
"\n"
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"pxelinux.0\";\n"
" }\n"
"}\n"
"</screen></informalexample> 注意对于 PXE 引导来说，客户端文件名 "
"<filename>pxelinux.0</filename> 是一个 boot loader，而非一个内核映象(参见下面"
"的 <xref linkend=\"tftp-images\"/>)。"

#. Tag: para
#: install-methods.xml:551
#, no-c-format
msgid ""
"If your machine uses UEFI to boot, you will have to specify a boot loader "
"appropriate for UEFI machines, for example"
msgstr "如果机器使用 UEFI 来引导，那么必须指定适于 UEFI 机器的引导程序，例如"

#. Tag: screen
#: install-methods.xml:555
#, no-c-format
msgid ""
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"debian-installer/amd64/bootnetx64.efi\";\n"
" }\n"
"}"
msgstr ""
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"debian-installer/amd64/bootnetx64.efi\";\n"
" }\n"
"}"

#. Tag: title
#: install-methods.xml:568
#, no-c-format
msgid "Setting up a BOOTP server"
msgstr "架设 BOOTP 服务器"

#. Tag: para
#: install-methods.xml:569
#, no-c-format
msgid ""
"There are two BOOTP servers available for GNU/Linux. The first is CMU "
"<command>bootpd</command>. The other is actually a DHCP server: ISC "
"<command>dhcpd</command>. In &debian-gnu; these are contained in the "
"<classname>bootp</classname> and <classname>isc-dhcp-server</classname> "
"packages respectively."
msgstr ""
"在 GNU/Linux 下面可以使用两种 BOOTP 服务器。首先是 CMU <command>bootpd</"
"command>，另外一种实际上是 DHCP 服务器：ISC <command>dhcpd</command>。"
"&debian-gnu; 中它们分别被包含在 <classname>bootp</classname> 和 "
"<classname>isc-dhcp-server</classname> 软件包。"

#. Tag: para
#: install-methods.xml:577
#, no-c-format
msgid ""
"To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
"relevant line in <filename>/etc/inetd.conf</filename>. On &debian-gnu;, you "
"can run <userinput>update-inetd --enable bootps</userinput>, then "
"<userinput>/etc/init.d/inetd reload</userinput> to do so. Just in case your "
"BOOTP server does not run &debian;, the line in question should look like: "
"<informalexample><screen>\n"
"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
"</screen></informalexample> Now, you must create an <filename>/etc/bootptab</"
"filename> file. This has the same sort of familiar and cryptic format as the "
"good old BSD <filename>printcap</filename>, <filename>termcap</filename>, "
"and <filename>disktab</filename> files. See the <filename>bootptab</"
"filename> manual page for more information. For CMU <command>bootpd</"
"command>, you will need to know the hardware (MAC) address of the client. "
"Here is an example <filename>/etc/bootptab</filename>: "
"<informalexample><screen>\n"
"client:\\\n"
"  hd=/tftpboot:\\\n"
"  bf=tftpboot.img:\\\n"
"  ip=192.168.1.90:\\\n"
"  sm=255.255.255.0:\\\n"
"  sa=192.168.1.1:\\\n"
"  ha=0123456789AB:\n"
"</screen></informalexample> You will need to change at least the <quote>ha</"
"quote> option, which specifies the hardware address of the client. The "
"<quote>bf</quote> option specifies the file a client should retrieve via "
"TFTP; see <xref linkend=\"tftp-images\"/> for more details."
msgstr ""
"为了使用 CMU <command>bootpd</command>，您必须首先将 <filename>/etc/inetd."
"conf</filename> 中相关的注释标记去掉(或者加入一些新行)。在 &debian-gnu; 里，"
"您可以运行 <userinput>update-inetd --enable bootps</userinput>，然后执行 "
"<userinput>/etc/init.d/inetd reload</userinput> 来实现此任务。万一您的 BOOTP "
"服务器不是运行在 &debian; 上，这行看起来应该像这样："
"<informalexample><screen>\n"
"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
"</screen></informalexample> 现在，您必须创建一个 <filename>/etc/bootptab</"
"filename> 文件。它具有和一些经典的 BSD 文件很相似，并使用相同的加密格式。这些"
"文件包括 <filename>printcap</filename>、<filename>termcap</filename> 和 "
"<filename>disktab</filename>。参见 <filename>bootptab</filename> 的手册页以获"
"得更多的信息。对于 CMU <command>bootpd</command>，您将需要知道客户机硬件(MAC)"
"地址。这里有一个示例 <filename>/etc/bootptab</filename>："
"<informalexample><screen>\n"
"client:\\\n"
"  hd=/tftpboot:\\\n"
"  bf=tftpboot.img:\\\n"
"  ip=192.168.1.90:\\\n"
"  sm=255.255.255.0:\\\n"
"  sa=192.168.1.1:\\\n"
"  ha=0123456789AB:\n"
"</screen></informalexample> 您至少需要修改 <quote>ha</quote> 选项，它指定了客"
"户机的硬件地址。<quote>bf</quote> 选项则指定了一个客户机应该通过 TFTP 取得的"
"文件名称。请从 <xref linkend=\"tftp-images\"/> 处获得更多的信息。"

#. Tag: para
#: install-methods.xml:604
#, no-c-format
msgid ""
"By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
"easy, because it treats BOOTP clients as a moderately special case of DHCP "
"clients. Some architectures require a complex configuration for booting "
"clients via BOOTP. If yours is one of those, read the section <xref linkend="
"\"dhcpd\"/>. Otherwise you will probably be able to get away with simply "
"adding the <userinput>allow bootp</userinput> directive to the configuration "
"block for the subnet containing the client in <filename>/etc/dhcp/dhcpd."
"conf</filename>, and restart <command>dhcpd</command> with <userinput>/etc/"
"init.d/isc-dhcp-server restart</userinput>."
msgstr ""
"相反，通过 ISC <command>dhcpd</command> 设置 BOOTP 就非常容易。因为它把 "
"BOOTP 客户程序看成一个特殊的 DHCP 客户端。部分体系结构需要经过复杂的设置才能"
"从 BOOTP 启动客户端。如果您的机器属于这种情况，请阅读<xref linkend=\"dhcpd\"/"
">。否则，大概只需要将 <userinput>allow bootp</userinput> 指令添加到包含客户机"
"的子网的配置部分 <filename>/etc/dhcp/dhcpd.conf</filename>，并用命令 "
"<userinput>/etc/init.d/isc-dhcp-server restart</userinput> 重新启动 "
"<command>dhcpd</command>。"

#. Tag: title
#: install-methods.xml:623
#, no-c-format
msgid "Enabling the TFTP Server"
msgstr "开启 TFTP 服务器"

#. Tag: para
#: install-methods.xml:624
#, no-c-format
msgid ""
"To get the TFTP server ready to go, you should first make sure that "
"<command>tftpd</command> is enabled."
msgstr ""
"要准备好 TFTP 服务器，您首先需要确定 <command>tftpd</command> 已经启动。"

#. Tag: para
#: install-methods.xml:629
#, no-c-format
msgid ""
"In the case of <classname>tftpd-hpa</classname> there are two ways the "
"service can be run. It can be started on demand by the system's "
"<classname>inetd</classname> daemon, or it can be set up to run as an "
"independent daemon. Which of these methods is used is selected when the "
"package is installed and can be changed by reconfiguring the package."
msgstr ""
"对于 <classname>tftpd-hpa</classname> 有两种方式可以启动服务。它可以通过系统"
"的 <classname>inetd</classname> 守护程序启动，或者设置为独立的守护程序。这可"
"以在安装软件包的时候选择，也可以用重新配置软件包方式修改。"

#. Tag: para
#: install-methods.xml:638
#, no-c-format
msgid ""
"Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
"to serve images from. However, &debian-gnu; packages may use other "
"directories to comply with the <ulink url=\"&url-fhs-home;\">Filesystem "
"Hierarchy Standard</ulink>. For example, <classname>tftpd-hpa</classname> by "
"default uses <filename>/srv/tftp</filename>. You may have to adjust the "
"configuration examples in this section accordingly."
msgstr ""
"因为历史原因，TFTP 服务器使用 <filename>/tftpboot</filename> 作为映像文件目"
"录。然而，&debian-gnu; 软件包遵守 <ulink url=\"&url-fhs-home;\">Filesystem "
"Hierarchy Standard</ulink> 使用其他的目录。例如，<classname>tftpd-hpa</"
"classname> 默认使用 <filename>/srv/tftp</filename>。您或许要适当地调整一下配"
"置文件示例。"

#. Tag: para
#: install-methods.xml:648
#, no-c-format
msgid ""
"All <command>in.tftpd</command> alternatives available in &debian; should "
"log TFTP requests to the system logs by default. Some of them support a "
"<userinput>-v</userinput> argument to increase verbosity. It is recommended "
"to check these log messages in case of boot problems as they are a good "
"starting point for diagnosing the cause of errors."
msgstr ""
"&debian; 中所有 <command>in.tftpd</command> 参数默认都会将 TFTP 请求记录到系"
"统日志中。有些还支持 <userinput>-v</userinput> 选项增加详细程度。万一遇到引导"
"问题，推荐先检查这些日志信息，这对于分析错误是一个好的起始点。"

#. Tag: title
#: install-methods.xml:660
#, no-c-format
msgid "Move TFTP Images Into Place"
msgstr "将 TFTP 映像放到适当的位置"

#. Tag: para
#: install-methods.xml:661
#, no-c-format
msgid ""
"Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
"files\"/>, in the <command>tftpd</command> boot image directory. You may "
"have to make a link from that file to the file which <command>tftpd</"
"command> will use for booting a particular client. Unfortunately, the file "
"name is determined by the TFTP client, and there are no strong standards."
msgstr ""
"接下来，将 <xref linkend=\"where-files\"/> 中找到的 TFTP 启动映像放置到 "
"<command>tftpd</command> 引导映像目录中。您可能需要将该文件链接到 "
"<command>tftpd</command> 所使用的引导特定客户端的文件名。不幸的是，这个文件名"
"完全决定于 TFTP 客户程序，而且没有一个强制的标准。"

#. Tag: para
#: install-methods.xml:712
#, no-c-format
msgid ""
"For PXE booting, everything you should need is set up in the "
"<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
"tarball into the <command>tftpd</command> boot image directory. Make sure "
"your dhcp server is configured to pass <filename>pxelinux.0</filename> to "
"<command>tftpd</command> as the filename to boot. For UEFI machines, you "
"will need to pass an appropriate EFI boot image name (such as <filename>/"
"debian-installer/amd64/bootnetx64.efi</filename>)."
msgstr ""
"对于用 PXE 引导来说，您所需的只是建立 <filename>netboot/netboot.tar.gz</"
"filename> 压缩包。只须将此包解压到 <command>tftpd</command> 引导映像目录下。"
"并确保您的 DHCP 服务器的配置将会把 <filename>pxelinux.0</filename> 作为启动所"
"需的文件名传递给 <command>tftpd</command>。对于 UEFI 机器，需要传递适当的 "
"EFI 引导映像名称（如 <filename>/debian-installer/amd64/bootnetx64.efi</"
"filename>）。"

#. Tag: title
#: install-methods.xml:731
#, no-c-format
msgid "Automatic Installation"
msgstr "自动化安装"

#. Tag: para
#: install-methods.xml:732
#, no-c-format
msgid ""
"For installing on multiple computers it's possible to do fully automatic "
"installations. &debian; packages intended for this include <classname>fai-"
"quickstart</classname>, which can use an install server (have a look at the "
"<ulink url=\"http://fai-project.org\">FAI home page</ulink> for detailed "
"information) and the &debian; Installer itself."
msgstr ""
"要同时安装多台计算机，可以使用完全自动方式安装。这方面的 &debian; 软件包包括"
"可以用来安装服务器的 <classname>fai-quickstart</classname>（请参阅 <ulink "
"url=\"http://fai-project.org\">FAI home page</ulink> 了解更多细节）和 "
"&debian; 安装器自身。"

#. Tag: title
#: install-methods.xml:744
#, no-c-format
msgid "Automatic Installation Using the &debian; Installer"
msgstr "使用 &debian; 安装程序进行自动安装"

#. Tag: para
#: install-methods.xml:745
#, no-c-format
msgid ""
"The &debian; Installer supports automating installs via preconfiguration "
"files. A preconfiguration file can be loaded from the network or from "
"removable media, and used to fill in answers to questions asked during the "
"installation process."
msgstr ""
"&debian; 安装程序支持使用预先配置的文件进行自动安装。预置文件可以从网络或移动"
"介质上加载，并自动回答安装过程中的问题。"

#. Tag: para
#: install-methods.xml:752
#, no-c-format
msgid ""
"Full documentation on preseeding including a working example that you can "
"edit is in <xref linkend=\"appendix-preseed\"/>."
msgstr ""
"在 <xref linkend=\"appendix-preseed\"/> 是有关预置文件的完整文档，并有一些可"
"以使用的例子供您修改。"

#. Tag: title
#: install-methods.xml:766
#, no-c-format
msgid "Verifying the integrity of installation files"
msgstr "验证安装文件的完整性"

#. Tag: para
#: install-methods.xml:768
#, no-c-format
msgid ""
"You can verify the integrity of downloaded files against checksums provided "
"in <filename>SHA256SUMS</filename> or <filename>SHA512SUMS</filename> files "
"on Debian mirrors. You can find them in the same places as the installation "
"images itself. Visit the following locations:"
msgstr ""
"您可以相对 Debian 镜像上的 <filename>SHA256SUMS</filename> 或 "
"<filename>SHA512SUMS</filename> 文件来验证下载的文件的完整性。你可以在相同位"
"置发现它们作为安装映像本身。请访问后面的位置："

#. Tag: para
#: install-methods.xml:779
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"cd/\">checksum files for CD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"cd/\">CD映像的校验和文件</ulink>,"

#. Tag: para
#: install-methods.xml:785
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"dvd/\">checksum files for DVD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"dvd/\">DVD映像的校验和文件</ulink>,"

#. Tag: para
#: install-methods.xml:791
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"bd/\">checksum files for BD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"bd/\">BD映像的校验和文件</ulink>,"

#. Tag: para
#: install-methods.xml:797
#, no-c-format
msgid ""
"<ulink url=\"http://&archive-mirror;/debian/dists/&releasename;/main/"
"installer-&architecture;/current/images/\">checksum files for other "
"installation files</ulink>."
msgstr ""
"<ulink url=\"http://&archive-mirror;/debian/dists/&releasename;/main/"
"installer-&architecture;/current/images/\">其他安装文件的校验和文件</ulink>."

#. Tag: para
#: install-methods.xml:805
#, no-c-format
msgid ""
"To compute the checksum of a downloaded installation file, use "
"<informalexample><screen>\n"
"sha256sum filename.iso\n"
"</screen></informalexample> respective <informalexample><screen>\n"
"sha512sum filename.iso\n"
"</screen></informalexample> and then compare the shown checksum against the "
"corresponding one in the <filename>SHA256SUMS</filename> respective "
"<filename>SHA512SUMS</filename> file."
msgstr ""
"为了计算下载的安装文件的校验和，请分别使用 <informalexample><screen>\n"
"sha256sum filename.iso\n"
"</screen></informalexample> 和 <informalexample><screen>\n"
"sha512sum filename.iso\n"
"</screen></informalexample>，然后将显示的校验和与各自相应的 "
"<filename>SHA256SUMS</filename> 和 <filename>SHA512SUMS</filename> 文件中的值"
"进行比较。"

#. Tag: para
#: install-methods.xml:818
#, no-c-format
msgid ""
"The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
"\"https://www.debian.org/CD/faq/index.en.html#verify\">more useful "
"information</ulink> on this topic (such as the script "
"<filename>check_debian_iso</filename>, to semi-automate above procedure), as "
"well as instructions, how to verify the integrity of the above checksum "
"files themselves."
msgstr ""
"在这个题目（如脚本<filename>check_debian_iso</filename>，将上述过程半自动化）"
"上，<ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> 具有 <ulink url="
"\"https://www.debian.org/CD/faq/index.en.html#verify\">更多有用信息</ulink>，"
"以及指示，如何验证上述校验和文件自身的完整性。"

#~ msgid ""
#~ "Alternatively, for very small USB sticks, only a few megabytes in size, "
#~ "you can download the &netboot-mini-iso; image from the <filename>netboot</"
#~ "filename> directory (at the location mentioned in <xref linkend=\"where-"
#~ "files\"/>)."
#~ msgstr ""
#~ "另外，对于只有几 M 的小容量 U 盘，您可以从 <filename>netboot</filename> 目"
#~ "录下载 &netboot-mini-iso; 映像(位于 <xref linkend=\"where-files\"/>)。"

#~ msgid ""
#~ "Simply writing the installation image to USB like this should work fine "
#~ "for most users. The other options below are more complex, mainly for "
#~ "people with specialised needs."
#~ msgstr ""
#~ "对大多数用户来说，简单地把安装映像写入 U 盘已经够用。下面更为复杂的选项主"
#~ "要提供给有特殊需要的用户。"

#~ msgid ""
#~ "The hybrid image on the stick does not occupy all the storage space, so "
#~ "it may be worth considering using the free space to hold firmware files "
#~ "or packages or any other files of your choice. This could be useful if "
#~ "you have only one stick or just want to keep everything you need on one "
#~ "device."
#~ msgstr ""
#~ "U 盘上的混合映像不占据所有的存储空间，所以可以考虑使用空余的空间来保存您需"
#~ "要保存的固件文件、软件包或任何其它文件。如果您只有一块 U 盘或者想将所有东"
#~ "西保存在同一个设备上，这会很有用。"

#~ msgid ""
#~ "To do so, use cfdisk or any other partitioning tool to create an "
#~ "additional partition on the stick. Then create a (FAT) filesystem on the "
#~ "partition, mount it and copy or unpack the firmware onto it, for example "
#~ "with: <informalexample><screen>\n"
#~ "# mkdosfs -n FIRMWARE /dev/sdX3\n"
#~ "# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>mkdosfs</command> command is "
#~ "contained in the <classname>dosfstools</classname> &debian; package."
#~ msgstr ""
#~ "要如此做，请使用 cfdisk 或者任何其他的分区工具在 U 盘上创建额外的分区。然"
#~ "后，在分区上创建一个（FAT）文件系统，挂载它，并将固件复制或者解压进分区，"
#~ "例如：<informalexample><screen>\n"
#~ "# mkdosfs -n FIRMWARE /dev/sdX3\n"
#~ "# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt\n"
#~ "</screen></informalexample> 注意使用符合您的 U 盘的正确的分区名。"
#~ "<command>mkdosfs</command> 命令包含于 <classname>dosfstools</classname> "
#~ "&debian; 软件包。"

#~ msgid ""
#~ "If you have chosen the <filename>mini.iso</filename> to be written to the "
#~ "USB stick, the second partition doesn't have to be created, as - very "
#~ "nicely - it will already be present. Unplugging and replugging the USB "
#~ "stick should make the two partitions visible."
#~ msgstr ""
#~ "如果您选择将 <filename>mini.iso</filename> 写到 U 盘上，则不必建立第二个分"
#~ "区，因为很棒的是，它将已经存在。拔下再插上 U 盘就可以看到两个分区。"

#~ msgid "Manually copying files to the USB stick"
#~ msgstr "手动复制文件到 U 盘"

#~ msgid ""
#~ "Prior to isohybrid technology being used for &debian; installation "
#~ "images, the methods documented in the chapters below were used to prepare "
#~ "media for booting from USB devices. These have been superseded by the "
#~ "technique in <xref linkend=\"usb-copy-isohybrid\"/>, but have been left "
#~ "here for educational and historical purposes and in case they are useful "
#~ "to some user."
#~ msgstr ""
#~ "在 isohybrid 技术用于 &debian; 安装介质之前，下面章节描述的方法曾用于准备"
#~ "安装介质以从 USB 设备启动。这些方法已经被 <xref linkend=\"usb-copy-"
#~ "isohybrid\"/> 描述的技术取代，但本文档仍保留这部分内容，以供教学和存档目"
#~ "的，并且某些用户也可能需要它们。"

#~ msgid ""
#~ "An alternative to the method described in <xref linkend=\"usb-copy-"
#~ "isohybrid\"/> is to manually copy the installer files, and also an "
#~ "installation image to the stick. Note that the USB stick should be at "
#~ "least 1 GB in size (smaller setups are possible using the files from "
#~ "netboot, following <xref linkend=\"usb-copy-flexible\"/>)."
#~ msgstr ""
#~ "和 <xref linkend=\"usb-copy-isohybrid\"/> 不同的另一种方法是手动将安装文件"
#~ "和安装映像复制到 U 盘。注意 U 盘的最小容量为 1 GB（如果您使用 netboot 的文"
#~ "件，则也可以使用更小的容量，请参考 <xref linkend=\"usb-copy-flexible\"/"
#~ ">）。"

#~ msgid ""
#~ "There is an all-in-one file &hdmedia-boot-img; which contains all the "
#~ "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
#~ "<classname>syslinux</classname> and its configuration file</phrase>."
#~ msgstr ""
#~ "有一个文件合集 &hdmedia-boot-img; 包含所有的安装程序文件（包括内核）"
#~ "<phrase arch=\"x86\">以及 <classname>syslinux</classname> 和对应的配置文件"
#~ "</phrase>。"

#~ msgid ""
#~ "Note that, although convenient, this method does have one major "
#~ "disadvantage: the logical size of the device will be limited to 1 GB, "
#~ "even if the capacity of the USB stick is larger. You will need to "
#~ "repartition the USB stick and create new file systems to get its full "
#~ "capacity back if you ever want to use it for some different purpose."
#~ msgstr ""
#~ "需要注意的是，虽然方便，但该方法有一个主要缺点：即使 U 盘容量更大，该设备"
#~ "的逻辑尺寸还是限制在 1 GB。如果您要该 U 盘作其他用途，需要为它重新分区，为"
#~ "剩余容量创建一个新的文件系统。"

#~ msgid "Simply extract this image directly to your USB stick:"
#~ msgstr "只需简单地将该映像直接解压到 U 盘："

#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"

#~ msgid ""
#~ "After that, mount the USB memory stick <phrase arch="
#~ "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
#~ "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
#~ "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
#~ "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
#~ "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
#~ "image (netinst or full CD; see <xref linkend=\"official-cdrom\"/>) to it. "
#~ "Unmount the stick (<userinput>umount /mnt</userinput>) and you are done."
#~ msgstr ""
#~ "然后，挂载 U 盘<phrase arch=\"x86\">（<userinput>mount /dev/"
#~ "<replaceable>sdX</replaceable> /mnt</userinput>），</phrase> <phrase arch="
#~ "\"powerpc\">（<userinput>mount /dev/<replaceable>sdX2</replaceable> /mnt</"
#~ "userinput>），</phrase>现在上面有了<phrase arch=\"x86\">一个 FAT 文件系统"
#~ "</phrase> <phrase arch=\"powerpc\">一个 HFS 文件系统</phrase>，然后复制 "
#~ "&debian; ISO 映像（netinst 或完整的 CD；参见 <xref linkend=\"official-"
#~ "cdrom\"/>）到里面。卸载 U 盘 (<userinput>umount /mnt</userinput>) 就完成"
#~ "了。"

#~ msgid "Manually copying files to the USB stick &mdash; the flexible way"
#~ msgstr "手动复制文件到 U 盘 &mdash; 灵活的方法"

#~ msgid ""
#~ "If you like more flexibility or just want to know what's going on, you "
#~ "should use the following method to put the files on your stick. One "
#~ "advantage of using this method is that &mdash; if the capacity of your "
#~ "USB stick is large enough &mdash; you have the option of copying any ISO "
#~ "image, even a DVD image, to it."
#~ msgstr ""
#~ "如果您需要更多的灵活性，或者只是想了解其间发生了什么，应该使用如下的方法来"
#~ "把文件放到 U 盘。使用这个方法的一个优点是，&mdash; 如果 U 盘的足够大"
#~ "&mdash;，那么可以选择将任何 ISO 映像复制到上面，甚至是 DVD 映像。"

#~ msgid "Partitioning and adding a boot loader"
#~ msgstr "分区和添加 boot loader"

#~ msgid ""
#~ "We will show how to set up the memory stick to use the first partition, "
#~ "instead of the entire device."
#~ msgstr "我们将展示如何使用 U 盘的第一个分区，而不是整个设备。"

#~ msgid ""
#~ "In order to start the kernel after booting from the USB stick, we will "
#~ "put a boot loader on the stick. Although any boot loader should work, "
#~ "it's convenient to use <classname>syslinux</classname>, since it uses a "
#~ "FAT16 partition and can be reconfigured by just editing a text file. Any "
#~ "operating system which supports the FAT file system can be used to make "
#~ "changes to the configuration of the boot loader."
#~ msgstr ""
#~ "为了在 U 盘引导后启动内核，我们要在 U 盘上放入一个 boot loader。尽管任何 "
#~ "boot loader 都应该可以胜任，不过还是使用 <classname>syslinux</classname> "
#~ "更方便。主要原因是它可以使用 FAT16 分区，而且只需要编辑一个文本文件就能对"
#~ "其进行配置。任何支持 FAT 文件系统的操作系统都可以用来改变 boot loader 的配"
#~ "置文件。"

#~ msgid ""
#~ "First, you need to install the <classname>syslinux</classname> and "
#~ "<classname>mtools</classname> packages on your system."
#~ msgstr ""
#~ "首先，您需要在您的系统上安装 <classname>syslinux</classname> 和 "
#~ "<classname>mtools</classname> 软件包。"

#~ msgid ""
#~ "Since most USB sticks come pre-configured with a single FAT16 partition, "
#~ "you probably won't have to repartition or reformat the stick. If you have "
#~ "to do that anyway, use <command>cfdisk</command> or any other "
#~ "partitioning tool to create a FAT16 partition now<footnote> <para> Don't "
#~ "forget to activate the <quote>bootable</quote> flag. </para> </footnote>, "
#~ "and then install an MBR using: <informalexample><screen>\n"
#~ "# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
#~ "</screen></informalexample> Now create the filesystem using: "
#~ "<informalexample><screen>\n"
#~ "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>mkdosfs</command> command is "
#~ "contained in the <classname>dosfstools</classname> &debian; package."
#~ msgstr ""
#~ "由于大多数 U 盘预先设置了一个单独的 FAT16 分区，您可能不需要重新分区或者格"
#~ "式化 U 盘。如果必须要做，请现在使用 <command>cfdisk</command> 或者其他的分"
#~ "区工具来创建一个 FAT16 分区<footnote> <para> 别忘记激活 <quote>bootable</"
#~ "quote> 标记。</para> </footnote>，然后使用以下命令安装 MBR："
#~ "<informalexample><screen>\n"
#~ "# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
#~ "</screen></informalexample> 现在，使用以下命令创建文件系统："
#~ "<informalexample><screen>\n"
#~ "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> 注意，请使用正确的 U 盘设备名称。"
#~ "<command>mkdosfs</command> 命令包含在 <classname>dosfstools</classname> "
#~ "&debian; 软件包内。"

#~ msgid ""
#~ "Having a correctly partitioned USB stick (now), you need to put "
#~ "<classname>syslinux</classname> on the FAT16 partition with: "
#~ "<informalexample><screen>\n"
#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> Again, take care that you use the correct "
#~ "device name. The partition must not be mounted when starting "
#~ "<command>syslinux</command>. This procedure writes a boot sector to the "
#~ "partition and creates the file <filename>ldlinux.sys</filename> which "
#~ "contains the boot loader code."
#~ msgstr ""
#~ "现在，既然已经有了正确分区的 U 盘，您需要使用以下命令来在 FAT16 分区上安"
#~ "装 <classname>syslinux</classname>：<informalexample><screen>\n"
#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> 再提醒一次，请确认您使用的是正确的设备名称。启"
#~ "动 <command>syslinux</command> 的时候该分区不能被挂载，因为该过程会向分区"
#~ "的引导扇区写入数据，并且创建包含 boot loader 代码的 <filename>ldlinux."
#~ "sys</filename> 文件。"

#~ msgid "Adding the installer files"
#~ msgstr "添加安装程序文件"

#~ msgid ""
#~ "There are two different installation variants to choose here: The hd-"
#~ "media variant needs an installation ISO file on the stick, to load "
#~ "installer modules and the base system from. The netboot installer however "
#~ "will load all that from a &debian; mirror."
#~ msgstr ""
#~ "这里可以选择两种不同的安装方式：hd-media 方式需要 U 盘上有 ISO 安装映像，"
#~ "以加载安装程序模块和基本系统。netboot 安装程序则会从 &debian; 镜像站点加载"
#~ "上述文件。"

#~ msgid ""
#~ "According to your choice, you have to download some installer files from "
#~ "the hd-media or netboot subdirectory of <ulink url=\"&url-debian-"
#~ "installer;images\">debian/dists/&releasename;/main/installer-"
#~ "&architecture;/current/images/</ulink> on any &debian; mirror: "
#~ "<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
#~ "<filename>linux</filename> (kernel binary) </para></listitem> "
#~ "<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
#~ "para></listitem> </itemizedlist> You can choose between either the text-"
#~ "based version of the installer (the files can be found directly in hd-"
#~ "media or netboot) or the graphical version (look in the respective "
#~ "<filename>gtk</filename> subdirectories)."
#~ msgstr ""
#~ "根据您的选择，您需要从任意 &debian; 镜像站点的 <ulink url=\"&url-debian-"
#~ "installer;images\">debian/dists/&releasename;/main/installer-"
#~ "&architecture;/current/images/</ulink> 目录的 hd-media 或者 netboot 子目录"
#~ "下载一些安装程序文件：<itemizedlist> <listitem><para> <filename>vmlinuz</"
#~ "filename> 或 <filename>linux</filename>（内核二进制文件）</para></"
#~ "listitem> <listitem><para> <filename>initrd.gz</filename>（初始化 ramdisk "
#~ "映像）</para></listitem> </itemizedlist> 您可以选择安装程序的文本版本（直"
#~ "接能在 hd-media 或 netboot 下找到的文件）或者图形版本（在对应的 "
#~ "<filename>gtk</filename> 子目录寻找）。"

#~ msgid ""
#~ "Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
#~ "replaceable> /mnt</userinput>) and copy the downloaded files to the root "
#~ "directory of the stick."
#~ msgstr ""
#~ "接下来就是挂载分区（<userinput>mount /dev/<replaceable>sdX1</"
#~ "replaceable> /mnt</userinput>），然后复制下载的文件到 U 盘的根目录。"

#~ msgid ""
#~ "Next you should create a text file named <filename>syslinux.cfg</"
#~ "filename> in the root directory of the stick as configuration file for "
#~ "syslinux, which at a bare minimum should contain the following line: "
#~ "<informalexample><screen>\n"
#~ "default vmlinuz initrd=initrd.gz\n"
#~ "</screen></informalexample> Change the name of the kernel binary to "
#~ "<quote><filename>linux</filename></quote> if you used files from "
#~ "<filename>netboot</filename>."
#~ msgstr ""
#~ "接下来需要在 U 盘根目录创建一个名为 <filename>syslinux.cfg</filename> 的纯"
#~ "文本 syslinux 配置文件，里面最少要包含下面的行："
#~ "<informalexample><screen>\n"
#~ "default vmlinuz initrd=initrd.gz\n"
#~ "</screen></informalexample> 如果您使用了来自 <filename>netboot</filename> "
#~ "的文件，请将内核二进制文件的名称改为 <quote><filename>linux</filename></"
#~ "quote>。"

#~ msgid ""
#~ "For the graphical installer (from <filename>gtk</filename>) you should "
#~ "add <userinput>vga=788</userinput> at the end of the line. Other "
#~ "parameters can be appended as desired."
#~ msgstr ""
#~ "对于图形安装程序（来自 <filename>gtk</filename>），您需要在行末添加 "
#~ "<userinput>vga=788</userinput>。您还可以添加您想添加的其他参数。"

#~ msgid ""
#~ "To enable the boot prompt to permit further parameter appending, add a "
#~ "<userinput>prompt 1</userinput> line."
#~ msgstr ""
#~ "添加 <userinput>prompt 1</userinput> 一行，使得引导提示符可以允许附加参"
#~ "数。"

#~ msgid ""
#~ "If you used files from <filename>hd-media</filename>, you should now copy "
#~ "the ISO file of a &debian; installation image onto the stick. (For the "
#~ "<filename>netboot</filename> variant this is not needed.)"
#~ msgstr ""
#~ "如果您使用了来自 <filename>hd-media</filename> 的文件，您需要现在将 "
#~ "&debian; 安装映像 ISO 文件复制到 U 盘上。（对于 <filename>netboot</"
#~ "filename> 方法，则不需要这一步。）"

#~ msgid ""
#~ "You can use either a netinst or a full CD/DVD image (see <xref linkend="
#~ "\"official-cdrom\"/>). Be sure to select one that fits on your stick. "
#~ "Note that the <quote>netboot <filename>mini.iso</filename></quote> image "
#~ "is not usable for this purpose."
#~ msgstr ""
#~ "您可以选择 netinst 或完整 CD/DVD 映像（参阅 <xref linkend=\"official-cdrom"
#~ "\"/>）。请选择适合您 U 盘大小的映像。注意 <quote>netboot <filename>mini."
#~ "iso</filename></quote> 映象在这里并不适用。"

#~ msgid ""
#~ "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
#~ "userinput>)."
#~ msgstr "完成后，卸载 U 盘（<userinput>umount /mnt</userinput>）。"

#~ msgid ""
#~ "Hard disk installer booting from DOS using <command>loadlin</command>"
#~ msgstr "硬盘安装程序从 DOS 引导，使用 <command>loadlin</command>"

#~ msgid ""
#~ "This section explains how to prepare your hard drive for booting the "
#~ "installer from DOS using <command>loadlin</command>."
#~ msgstr ""
#~ "本节将说明如何用 <command>loadlin</command> 从 DOS 启动安装程序准备您的硬"
#~ "盘。"

#~ msgid ""
#~ "Copy the following directories from a &debian; installation image to "
#~ "<filename>c:\\</filename>."
#~ msgstr "从 &debian; 安装映象复制下列目录到 <filename>c:\\</filename>。"

#~ msgid ""
#~ "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
#~ msgstr "<filename>/&x86-install-dir;</filename> (二进制和 ramdisk 映象)"

#~ msgid "<filename>/tools</filename> (loadlin tool)"
#~ msgstr "<filename>/tools</filename> (loadlin 工具)"

#~ msgid ""
#~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
#~ "<command>mac-fdisk</command>'s <userinput>C</userinput> command and "
#~ "extract the image directly to that:"
#~ msgstr ""
#~ "在 U 盘上创建 \"Apple_Bootstrap\" 分区类型使用 <command>mac-fdisk</"
#~ "command> 的 <userinput>C</userinput> 命令，并直接解压映象："

#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"

#~ msgid "Partitioning the USB stick"
#~ msgstr "给 U 盘分区"

#~ msgid ""
#~ "Most USB sticks do not come pre-configured in such a way that Open "
#~ "Firmware can boot from them, so you will need to repartition the stick. "
#~ "On Mac systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</"
#~ "replaceable></userinput>, initialise a new partition map using the "
#~ "<userinput>i</userinput> command, and create a new partition of type "
#~ "Apple_Bootstrap using the <userinput>C</userinput> command. (Note that "
#~ "the first \"partition\" will always be the partition map itself.) Then "
#~ "type <informalexample><screen>\n"
#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>hformat</command> command is "
#~ "contained in the <classname>hfsutils</classname> &debian; package."
#~ msgstr ""
#~ "绝大多数 U 盘的预设置都不能让 Open Firmware 从该盘进行引导，因此您需要为 "
#~ "U 盘重新分区。在 Mac 系统上，执行 <userinput>mac-fdisk /dev/"
#~ "<replaceable>sdX</replaceable></userinput>，用 <userinput>i</userinput> 命"
#~ "令初始化新的分区映射，然后使用 <userinput>C</userinput> 命令创建一个新的类"
#~ "型为 Apple_Bootstrap 的分区。(要注意的是第一个\"分区\"总是分区映射本身。) "
#~ "然后键入 <informalexample><screen>\n"
#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
#~ "</screen></informalexample> 注意使用正确的 U 盘设备名称。"
#~ "<command>hformat</command> 命令包含在 &debian; 的 <classname>hfsutils</"
#~ "classname> 软件包中。"

#~ msgid ""
#~ "In order to start the kernel after booting from the USB stick, we will "
#~ "put a boot loader on the stick. The <command>yaboot</command> boot loader "
#~ "can be installed on an HFS filesystem and can be reconfigured by just "
#~ "editing a text file. Any operating system which supports the HFS file "
#~ "system can be used to make changes to the configuration of the boot "
#~ "loader."
#~ msgstr ""
#~ "为了能在 U 盘引导后启动内核，我们要在 U 盘上放入一个启动引导程序。"
#~ "<command>yaboot</command> 启动引导器可以被安装到 HFS 文件系统上，而且只需"
#~ "要编辑一个文本文件就能对其重新进行配置。任何支持 HFS 文件系统的操作系统可"
#~ "以用来改变启动引导器的配置文件。"

#~ msgid ""
#~ "The normal <command>ybin</command> tool that comes with <command>yaboot</"
#~ "command> does not yet understand USB storage devices, so you will have to "
#~ "install <command>yaboot</command> by hand using the <classname>hfsutils</"
#~ "classname> tools. Type <informalexample><screen>\n"
#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
#~ "$ hattrib -b :\n"
#~ "$ humount\n"
#~ "</screen></informalexample> Again, take care that you use the correct "
#~ "device name. The partition must not be otherwise mounted during this "
#~ "procedure. This procedure writes the boot loader to the partition, and "
#~ "uses the HFS utilities to mark it in such a way that Open Firmware will "
#~ "boot it. Having done this, the rest of the USB stick may be prepared "
#~ "using the normal Unix utilities."
#~ msgstr ""
#~ "常用的 <command>ybin</command> 工具(随 <command>yaboot</command> 附带)并不"
#~ "能识别 USB 存储设备，因此您不得不手动安装 <command>yaboot</command>，这可"
#~ "以通过 <classname>hfsutils</classname> 工具来完成。用法如下："
#~ "<informalexample><screen>\n"
#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
#~ "$ hattrib -b :\n"
#~ "$ humount\n"
#~ "</screen></informalexample> 再提醒一次，请确认您使用的是正确的设备名称。操"
#~ "作过程中一定不能挂载此分区。程序会向分区中写入 boot loader，并使用 HFS 工"
#~ "具向其添加标记，最终使得 Open Fireware 可以启动它。完成以上操作之后，U 盘"
#~ "的其他部分就可以用普通的 Unix 工具来处理了。"

#~ msgid "Adding the installer image"
#~ msgstr "添加安装程序映像"

#~ msgid ""
#~ "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
#~ "replaceable> /mnt</userinput>) and copy the following installer image "
#~ "files to the stick:"
#~ msgstr ""
#~ "接下来就是挂载分区(<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
#~ "mnt</userinput>)，然后复制下面的安装程序映象文件到 U 盘："

#~ msgid "<filename>vmlinux</filename> (kernel binary)"
#~ msgstr "<filename>vmlinux</filename> (内核二进制文件)"

#~ msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
#~ msgstr "<filename>initrd.gz</filename> (初始化内存映像)"

#~ msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
#~ msgstr "<filename>yaboot.conf</filename> (yaboot 配置文件)"

#~ msgid "<filename>boot.msg</filename> (optional boot message)"
#~ msgstr "<filename>boot.msg</filename> (可选的启动信息)"

#~ msgid ""
#~ "The <filename>yaboot.conf</filename> configuration file should contain "
#~ "the following lines: <informalexample><screen>\n"
#~ "default=install\n"
#~ "root=/dev/ram\n"
#~ "\n"
#~ "message=/boot.msg\n"
#~ "\n"
#~ "image=/vmlinux\n"
#~ "        label=install\n"
#~ "        initrd=/initrd.gz\n"
#~ "        initrd-size=10000\n"
#~ "        read-only\n"
#~ "</screen></informalexample> Please note that the <userinput>initrd-size</"
#~ "userinput> parameter may need to be increased, depending on the image you "
#~ "are booting."
#~ msgstr ""
#~ "<filename>yaboot.conf</filename> 配置文件应该含有以下几行："
#~ "<informalexample><screen>\n"
#~ "default=install\n"
#~ "root=/dev/ram\n"
#~ "\n"
#~ "message=/boot.msg\n"
#~ "\n"
#~ "image=/vmlinux\n"
#~ "        label=install\n"
#~ "        initrd=/initrd.gz\n"
#~ "        initrd-size=10000\n"
#~ "        read-only\n"
#~ "</screen></informalexample> 请注意，在必要的时候，您可能需要增大"
#~ "<userinput>initrd-size</userinput> 参数的数值，这完全取决于您所使用的内存"
#~ "映像的大小。"

#~ msgid ""
#~ "If you used an <filename>hd-media</filename> image, you should now copy "
#~ "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
#~ "a netinst or a full CD image (see <xref linkend=\"official-cdrom\"/>). Be "
#~ "sure to select one that fits. Note that the <quote>netboot <filename>mini."
#~ "iso</filename></quote> image is not usable for this purpose. </para> </"
#~ "footnote> onto the stick. When you are done, unmount the USB memory stick "
#~ "(<userinput>umount /mnt</userinput>)."
#~ msgstr ""
#~ "如果您使用 <filename>hd-media</filename> 映象，现在应该复制 &debian; ISO "
#~ "映像文件<footnote> <para> 您可以选择 netinst 或完整 CD 映像 (参阅 <xref "
#~ "linkend=\"official-cdrom\"/>)。确认选择合适的映象。注意 <quote>netboot "
#~ "<filename>mini.iso</filename></quote> 映象在这里并不适用。</para> </"
#~ "footnote> 到 U 盘。完成后，卸载 U 盘 (<userinput>umount /mnt</"
#~ "userinput>)。"

#~ msgid ""
#~ "The installer cannot boot from files on an HFS+ file system. MacOS System "
#~ "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. "
#~ "To determine whether your existing file system is HFS+, select "
#~ "<userinput>Get Info</userinput> for the volume in question. HFS file "
#~ "systems appear as <userinput>Mac OS Standard</userinput>, while HFS+ file "
#~ "systems say <userinput>Mac OS Extended</userinput>. You must have an HFS "
#~ "partition in order to exchange files between MacOS and Linux, in "
#~ "particular the installation files you download."
#~ msgstr ""
#~ "安装程序无法从 HFS+ 文件系统进行引导。MacOS System 8.1 及之后的系统可能使"
#~ "用 HFS+ 文件系统，NewWorld PowerMacs 则全部使用 HFS+。要确认您的系统是否"
#~ "是 HFS+，请选择 <userinput>Get Info</userinput> 来查看相关卷信息。HFS 文件"
#~ "系统文件系统显示为 <userinput>Mac OS Standard</userinput>，而 HFS+ 文件系"
#~ "统将显示为 <userinput>Mac OS Extended</userinput>。您必须使用一个 HFS 分区"
#~ "来在 MacOS 和 Linux 之间交换文件，特别是那些您下载的安装文件。"

#~ msgid ""
#~ "Different programs are used for hard disk installation system booting, "
#~ "depending on whether the system is a <quote>NewWorld</quote> or an "
#~ "<quote>OldWorld</quote> model."
#~ msgstr ""
#~ "根据您的系统是<quote>NewWorld</quote>还是<quote>OldWorld</quote>型号，硬盘"
#~ "安装程序的引导将使用不同的安装文件。"

#~ msgid ""
#~ "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
#~ "idea to use DHCP instead of BOOTP. Some of the latest machines are unable "
#~ "to boot using BOOTP."
#~ msgstr ""
#~ "对于 PowerPC 来说，如果您有一台 NewWorld Power Macintosh 机器，使用 DHCP "
#~ "来代替 BOOTP 比较好。有些最新的机器不能从 BOOTP 引导。"

#~ msgid ""
#~ "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. "
#~ "There is an <classname>rbootd</classname> package available in &debian;."
#~ msgstr ""
#~ "一些较早的 HPPA 机器(比如 715/75)使用 RBOOTD 而不是 BOOTP。&debian; 里面有"
#~ "一个 <classname>rbootd</classname> 软件包。"

#~ msgid ""
#~ "If you intend to install &debian; on an SGI machine and your TFTP server "
#~ "is a GNU/Linux box running Linux 2.4, you'll need to set the following on "
#~ "your server: <informalexample><screen>\n"
#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
#~ "</screen></informalexample> to turn off Path MTU discovery, otherwise the "
#~ "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets "
#~ "are sent from a source port no greater than 32767, or the download will "
#~ "stall after the first packet. Again, it's Linux 2.4.X tripping this bug "
#~ "in the PROM, and you can avoid it by setting <informalexample><screen>\n"
#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
#~ "</screen></informalexample> to adjust the range of source ports the Linux "
#~ "TFTP server uses."
#~ msgstr ""
#~ "如果您想要在一台 SGI 上安装 &debian; 并且您的 TFTP 服务器是一台运行 Linux "
#~ "2.4 的 GNU/Linux 机器，需要对服务器进行如下设置："
#~ "<informalexample><screen>\n"
#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
#~ "</screen></informalexample> 来关闭 Path MTU 查询，否则 SGI 的 PROM 不能下"
#~ "载内核。而且，您还要确保 TFTP 数据包是从一个不大于 32767 的端口送出，否则"
#~ "在第一包之后，下载将停止。重申一下，这是由于 Linux 2.4.X 触发了 PROM 里的"
#~ "一个 bug。您可以通过如下设置：<informalexample><screen>\n"
#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
#~ "</screen></informalexample> 调整 Linux TFTP 服务器使用的源端口范围以避开这"
#~ "个错误。"

#~ msgid ""
#~ "On NewWorld Power Macintosh machines, you will need to set up the "
#~ "<command>yaboot</command> boot loader as the TFTP boot image. "
#~ "<command>Yaboot</command> will then retrieve the kernel and RAMdisk "
#~ "images via TFTP itself. You will need to download the following files "
#~ "from the <filename>netboot/</filename> directory:"
#~ msgstr ""
#~ "在 NewWorld Power Macintosh 上，您需要设置 <command>yaboot</command> boot "
#~ "loader 作为 TFTP 引导映像。<command>Yaboot</command> 接下来将通过 TFTP 来"
#~ "获到内核和内存虚拟磁盘映像。您需要从 <filename>netboot/</filename> 目录下"
#~ "载一些文件："

#~ msgid "vmlinux"
#~ msgstr "vmlinux"

#~ msgid "initrd.gz"
#~ msgstr "initrd.gz"

#~ msgid "yaboot"
#~ msgstr "yaboot"

#~ msgid "yaboot.conf"
#~ msgstr "yaboot.conf"

#~ msgid "boot.msg"
#~ msgstr "boot.msg"

#~ msgid ""
#~ "For PXE booting, everything you should need is set up in the "
#~ "<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
#~ "tarball into the <command>tftpd</command> boot image directory. Make sure "
#~ "your dhcp server is configured to pass <filename>/debian-installer/ia64/"
#~ "elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
#~ msgstr ""
#~ "对于用 PXE 引导来说，您所需的只是设置 <filename>netboot/netboot.tar.gz</"
#~ "filename> 压缩包。简单地将此包解压到 <command>tftpd</command> 引导映像目录"
#~ "下。并确保您的 DHCP 服务器配置将会把 <filename>/debian-installer/ia64/"
#~ "elilo.efi</filename> 以启动所需的文件名传递至<command>tftpd</command>。"

#~ msgid "SPARC TFTP Booting"
#~ msgstr "SPARC TFTP 引导"

#~ msgid ""
#~ "Some SPARC architectures add the subarchitecture names, such as "
#~ "<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if "
#~ "your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the "
#~ "filename would be <filename>C0A80103.SUN4C</filename>. However, there are "
#~ "also subarchitectures where the file the client looks for is just "
#~ "<filename>client-ip-in-hex</filename>. An easy way to determine the "
#~ "hexadecimal code for the IP address is to enter the following command in "
#~ "a shell (assuming the machine's intended IP is 10.0.0.4). "
#~ "<informalexample><screen>\n"
#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
#~ "</screen></informalexample> To get to the correct filename, you will need "
#~ "to change all letters to uppercase and if necessary append the "
#~ "subarchitecture name."
#~ msgstr ""
#~ "一些 SPARC 体系通常使用子体系名称，比如 <quote>SUN4M</quote> 或者 "
#~ "<quote>SUN4C</quote>。因此，如果您的系统子体系是 SUN4C，其 IP 是 "
#~ "192.168.1.3，则文件名为 <filename>C0A80103.SUN4C</filename>。然而，有些子"
#~ "体系客户端所需要的文件仅仅是 <filename>client-ip-in-hex</filename>。一个简"
#~ "易的确定 16 进制 IP 地址的方法是在 shell 中输入下列命令(假设机器的 IP 为 "
#~ "10.0.0.4)。<informalexample><screen>\n"
#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
#~ "</screen></informalexample>。要得到正确的文件名，您应该将所有的字母改成大"
#~ "写，并在必要时加上子体系名。"

#~ msgid ""
#~ "If you've done all this correctly, giving the command <userinput>boot "
#~ "net</userinput> from the OpenPROM should load the image. If the image "
#~ "cannot be found, try checking the logs on your tftp server to see which "
#~ "image name is being requested."
#~ msgstr ""
#~ "如果都正确完成，从 OpenPROM 使用 <userinput>boot net</userinput> 命令应该"
#~ "加载映像。假如映像找不到，查看 tftp 服务器的日志所需要的映像文件名。"

#~ msgid ""
#~ "You can also force some sparc systems to look for a specific file name by "
#~ "adding it to the end of the OpenPROM boot command, such as "
#~ "<userinput>boot net my-sparc.image</userinput>. This must still reside in "
#~ "the directory that the TFTP server looks in."
#~ msgstr ""
#~ "您也可以通过把一个特定的文件名附加到 OpenPROM boot 命令的结尾来强制某些 "
#~ "SPARC 系统使用它。比如 <userinput>boot net my-sparc.image</userinput>。不"
#~ "过它仍然必须被请放置在 TFTP 服务器要查找的目录中。"

#~ msgid "SGI TFTP Booting"
#~ msgstr "SGI TFTP 引导"

#~ msgid ""
#~ "On SGI machines you can rely on the <command>bootpd</command> to supply "
#~ "the name of the TFTP file. It is given either as the <userinput>bf=</"
#~ "userinput> in <filename>/etc/bootptab</filename> or as the "
#~ "<userinput>filename=</userinput> option in <filename>/etc/dhcpd.conf</"
#~ "filename>."
#~ msgstr ""
#~ "在 SGI 机器上您可以依靠 <command>bootpd</command> 来给出 FTFP 文件的名字。"
#~ "它既可以是以 <userinput>bf=</userinput> 形式在 <filename>/etc/bootptab</"
#~ "filename> 文件中设定，也可以是以 <userinput>filename=</userinput> 选项形式"
#~ "出现在 <filename>/etc/dhcpd.conf</filename>。"

#~ msgid ""
#~ "Create a second, FAT partition on the stick, mount the partition and copy "
#~ "or unpack the firmware onto it. For example:"
#~ msgstr ""
#~ "在 U 盘上建立第二个，FAT格式的分区，挂载分期，并将固件解压并复制到上面。例"
#~ "如："

#~ msgid ""
#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt"
#~ msgstr ""
#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt"

#, fuzzy
#~| msgid ""
#~| "Hard disk installer booting using <command>LILO</command> or "
#~| "<command>GRUB</command>"
#~ msgid ""
#~ "Hard disk installer booting from Linux using <command>LILO</command> or "
#~ "<command>GRUB</command>"
#~ msgstr ""
#~ "硬盘安装程序引导使用 <command>LILO</command> 或 <command>GRUB</command>"

#~ msgid "Creating Floppies from Disk Images"
#~ msgstr "从软盘映像创建引导软盘"

#~ msgid ""
#~ "Bootable floppy disks are generally used as a last resort to boot the "
#~ "installer on hardware that cannot boot from CD or by other means."
#~ msgstr ""
#~ "可启动的软盘一般被视为是在那些不能从 CD 或其它方式启动的硬件上引导安装程序"
#~ "的最后一种方法。"

#~ msgid ""
#~ "Booting the installer from floppy disk reportedly fails on Mac USB floppy "
#~ "drives."
#~ msgstr "有报告说 Mac 上的 USB 软盘驱动器安装程序软盘引导失败。"

#~ msgid ""
#~ "Disk images are files containing the complete contents of a floppy disk "
#~ "in <emphasis>raw</emphasis> form. Disk images, such as <filename>boot."
#~ "img</filename>, cannot simply be copied to floppy drives. A special "
#~ "program is used to write the image files to floppy disk in <emphasis>raw</"
#~ "emphasis> mode. This is required because these images are raw "
#~ "representations of the disk; it is required to do a <emphasis>sector "
#~ "copy</emphasis> of the data from the file onto the floppy."
#~ msgstr ""
#~ "软盘映像是一些包含完整的 <emphasis>raw</emphasis> 格式软盘内容的文件。类"
#~ "似 <filename>boot.img</filename> 这样的软盘映像不能直接复制到软盘中。有一"
#~ "个特殊的程序可以将它们按 <emphasis>raw</emphasis> 模式写入软盘。这是一个必"
#~ "须的步骤，因为这些映像文件是一些原始的磁盘保存方式。所以需要把文件的数据"
#~ "<emphasis>按扇区复制</emphasis>到软盘中。"

#~ msgid ""
#~ "There are different techniques for creating floppies from disk images. "
#~ "This section describes how to create floppies from disk images on "
#~ "different platforms."
#~ msgstr ""
#~ "有各种不同的技术从软盘映像创建引导软盘。这一节将描述如何在不同平台上用软盘"
#~ "映像创建引导软盘。"

#~ msgid ""
#~ "Before you can create the floppies, you will first need to download them "
#~ "from one of the &debian; mirrors, as explained in <xref linkend="
#~ "\"downloading-files\"/>. <phrase arch=\"i386\">If you already have an "
#~ "installation CD-ROM or DVD, the floppy images may also be included on the "
#~ "CD/DVD.</phrase>"
#~ msgstr ""
#~ "制作软盘之前，您首先需要从 &debian; 镜像下载这些文件，见 <xref linkend="
#~ "\"downloading-files\"/>。<phrase arch=\"i386\">如果您已经有了安装 CD-ROM "
#~ "或 DVD，软盘映像可能已经包含在 CD/DVD 上面。</phrase>"

#~ msgid ""
#~ "No matter which method you use to create your floppies, you should "
#~ "remember to flip the write-protect tab on the floppies once you have "
#~ "written them, to ensure they are not damaged unintentionally."
#~ msgstr ""
#~ "无论您使用何种方法来建立引导软盘，您应该在建立以后记住切换写保护开关，以便"
#~ "确保内容不会在无意被抹掉。"

#~ msgid "Writing Disk Images From a Linux or Unix System"
#~ msgstr "从 Linux 或者 Unix 系统写软盘映像"

#~ msgid ""
#~ "To write the floppy disk image files to the floppy disks, you will "
#~ "probably need root access to the system. Place a good, blank floppy in "
#~ "the floppy drive. Next, use the command <informalexample><screen>\n"
#~ "$ dd if=<replaceable>filename</replaceable> of=/dev/fd0 bs=1024 "
#~ "conv=sync ; sync\n"
#~ "</screen></informalexample> where <replaceable>filename</replaceable> is "
#~ "one of the floppy disk image files. <filename>/dev/fd0</filename> is a "
#~ "commonly used name of the floppy disk device, it may be different on your "
#~ "workstation<phrase arch=\"sparc\"> (on Solaris, it is <filename>/dev/"
#~ "fd/0</filename>)</phrase>. The command may return to the prompt before "
#~ "Unix has finished writing the floppy disk, so look for the disk-in-use "
#~ "light on the floppy drive and be sure that the light is out and the disk "
#~ "has stopped revolving before you remove it from the drive. On some "
#~ "systems, you'll have to run a command to eject the floppy from the drive "
#~ "<phrase arch=\"sparc\"> (on Solaris, use <command>eject</command>, see "
#~ "the manual page)</phrase>."
#~ msgstr ""
#~ "为了把软盘映像写入软盘，您可能需要系统的 root 访问权限。在软驱中放入一张良"
#~ "好的空白软盘，然后使用命令 <informalexample><screen>\n"
#~ "$ dd if=<replaceable>filename</replaceable> of=/dev/fd0 bs=1024 "
#~ "conv=sync ; sync\n"
#~ "</screen></informalexample> 其中 <replaceable>filename</replaceable> 是一"
#~ "个软盘映像文件。<filename>/dev/fd0</filename> 是一个常见的软驱设备名。在您"
#~ "的工作站上可能有所不同<phrase arch=\"sparc\"> (Solaris 系统上是 "
#~ "<filename>/dev/fd/0</filename>)</phrase>。这个命令也许在写软盘任务结束之前"
#~ "就会返回到命令符下。请观察软盘驱动器上面的磁盘使用状态灯，并且确保在您拔出"
#~ "软盘的时候灯已熄灭。在某些系统上，您可能需要运行一条命令来弹出软盘<phrase "
#~ "arch=\"sparc\"> (Solaris 系统中使用 <command>eject</command> 命令，请参见"
#~ "其手册)</phrase>。"

#~ msgid ""
#~ "Some systems attempt to automatically mount a floppy disk when you place "
#~ "it in the drive. You might have to disable this feature before the "
#~ "workstation will allow you to write a floppy in <emphasis>raw mode</"
#~ "emphasis>. Unfortunately, how to accomplish this will vary based on your "
#~ "operating system. <phrase arch=\"sparc\"> On Solaris, you can work around "
#~ "volume management to get raw access to the floppy. First, make sure that "
#~ "the floppy is auto-mounted (using <command>volcheck</command> or the "
#~ "equivalent command in the file manager). Then use a <command>dd</command> "
#~ "command of the form given above, just replace <filename>/dev/fd0</"
#~ "filename> with <filename>/vol/rdsk/<replaceable>floppy_name</"
#~ "replaceable></filename>, where <replaceable>floppy_name</replaceable> is "
#~ "the name the floppy disk was given when it was formatted (unnamed "
#~ "floppies default to the name <filename>unnamed_floppy</filename>). On "
#~ "other systems, ask your system administrator. </phrase>"
#~ msgstr ""
#~ "有些系统会在您放入软盘时自动尝试对其进行挂载。若要让工作站允许您对软盘进"
#~ "行 <emphasis>raw mode</emphasis> 写入操作，您可能必须关闭此功能。不幸的"
#~ "是，如何关闭此功能的方法完全取决于具体的操作系统。<phrase arch=\"sparc\"> "
#~ "在 Solaris 上，您可以利用卷管理来获得对软驱的 raw 访问权。首先，确信软盘已"
#~ "经被自动挂载(使用 <command>volcheck</command> 或者文件管理器中的类似命"
#~ "令)。然后安照上面给出的形式使用 <command>dd</command> 命令，只是把 "
#~ "<filename>/dev/fd0</filename> 替换成 <filename>/vol/rdsk/"
#~ "<replaceable>floppy_name</replaceable></filename>，这里 "
#~ "<replaceable>floppy_name</replaceable> 是软盘在格式化时所定的名字。(未命名"
#~ "的软盘默认使用 <filename>unnamed_floppy</filename>)。至于其他系统，请咨询"
#~ "您的系统管理员)。</phrase>"

#~ msgid ""
#~ "If writing a floppy on powerpc Linux, you will need to eject it. The "
#~ "<command>eject</command> program handles this nicely; you might need to "
#~ "install it."
#~ msgstr ""
#~ "如果想在 powerpc Linux 上写入一张软盘，您将必须弹出它。<command>eject</"
#~ "command> 命令能够很好地对此进行控制，当然您可能需要先安装它。"

#~ msgid "Writing Disk Images From DOS, Windows, or OS/2"
#~ msgstr "在 DOS、Windows 或者 OS/2 下写磁盘映像"

#~ msgid ""
#~ "If you have access to an i386 or amd64 machine, you can use one of the "
#~ "following programs to copy images to floppies."
#~ msgstr ""
#~ "如果您能操作一台 i386 或 amd64 机器，可以使用如下方法之一往软盘复制映像文"
#~ "件。"

#~ msgid ""
#~ "The <command>rawrite1</command> and <command>rawrite2</command> programs "
#~ "can be used under MS-DOS. To use these programs, first make sure that you "
#~ "are booted into DOS. Trying to use these programs from within a DOS box "
#~ "in Windows, or double-clicking on these programs from the Windows "
#~ "Explorer is <emphasis>not</emphasis> expected to work."
#~ msgstr ""
#~ "<command>rawrite1</command> 和 <command>rawrite2</command> 程序可在 MS-"
#~ "DOS 下使用。如果想使用这些程序，首先要确定您是从 DOS 启动。在 Windows 的 "
#~ "DOS 窗口，或者在文件浏览器中双击使用这些程序是<emphasis>不能</emphasis>运"
#~ "行的。"

#~ msgid ""
#~ "The <command>rwwrtwin</command> program runs on Windows 95, NT, 98, 2000, "
#~ "ME, XP and probably later versions. To use it you will need to unpack "
#~ "diskio.dll in the same directory."
#~ msgstr ""
#~ "<command>rwwrtwin</command> 程序可以在 Windows 95、NT、98、2000、ME、XP 甚"
#~ "至可能最新的版本上运行。要使用它您需要解压 diskio.dll 至相同目录下。"

#~ msgid ""
#~ "These tools can be found on the Official &debian; CD-ROMs under the "
#~ "<filename>/tools</filename> directory."
#~ msgstr ""
#~ "这些工具可以在官方 &debian; 光盘中找到，位于 <filename>/tools</filename> "
#~ "目录下。"

#~ msgid "Writing Disk Images From MacOS"
#~ msgstr "在 MacOS 上写磁盘映像"

#~ msgid ""
#~ "An AppleScript, <application>Make &debian; Floppy</application>, is "
#~ "available for burning floppies from the provided disk image files. It can "
#~ "be downloaded from <ulink url=\"ftp://ftp2.sourceforge.net/pub/"
#~ "sourceforge/d/de/debian-imac/MakeDebianFloppy.sit\"></ulink>. To use it, "
#~ "just unstuff it on your desktop, and then drag any floppy image file to "
#~ "it. You must have Applescript installed and enabled in your extensions "
#~ "manager. Disk Copy will ask you to confirm that you wish to erase the "
#~ "floppy and proceed to write the file image to it."
#~ msgstr ""
#~ "这里有一个名为 <application>Make &debian; Floppy</application> 的 "
#~ "AppleSrcipt 可以用来从所提供的磁盘映像制作软盘。它可以从 <ulink url="
#~ "\"ftp://ftp2.sourceforge.net/pub/sourceforge/d/de/debian-imac/"
#~ "MakeDebianFloppy.sit\"></ulink> 处下载。使用时只需要解压文件至桌面，然后向"
#~ "其拖入想刻录的映像文件。您必须已经安装了 Applescript 并在您的扩展管理器中"
#~ "开启它。Disk Copy 会要求您确认的确想要清空磁盘并写入磁盘映像。"

#~ msgid ""
#~ "You can also use the MacOS utility <command>Disk Copy</command> directly, "
#~ "or the freeware utility <command>suntar</command>. The <filename>root."
#~ "bin</filename> file is an example of a floppy image. Use one of the "
#~ "following methods to create a floppy from the floppy image with these "
#~ "utilities."
#~ msgstr ""
#~ "您也可以直接使用 MacOS 工具 <command>Disk Copy</command>，或者免费软件工"
#~ "具 <command>suntar</command>。<filename>root.bin</filename> 是一个软盘映像"
#~ "范例。您可以使用以下方法之一来利用这些工具将磁盘映像写入软盘。"

#~ msgid "Writing Disk Images with <command>Disk Copy</command>"
#~ msgstr "写磁盘映像：使用<command>Disk Copy</command>"

#~ msgid ""
#~ "If you are creating the floppy image from files which were originally on "
#~ "the official &debian-gnu; CD, then the Type and Creator are already set "
#~ "correctly. The following <command>Creator-Changer</command> steps are "
#~ "only necessary if you downloaded the image files from a &debian; mirror."
#~ msgstr ""
#~ "假如您是使用官方 &debian-gnu; 光盘上的软盘映像文件，那么 Type 和 Creator "
#~ "已经设置正确。以下 <command>Creator-Changer</command> 步骤只针对从 "
#~ "&debian; 镜像下载映像文件的情况。"

#~ msgid ""
#~ "Obtain <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</"
#~ "ulink> and use it to open the <filename>root.bin</filename> file."
#~ msgstr ""
#~ "取得 <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</ulink> "
#~ "并且用它打开 <filename>root.bin</filename> 文件。"

#~ msgid ""
#~ "Change the Creator to <userinput>ddsk</userinput> (Disk Copy), and the "
#~ "Type to <userinput>DDim</userinput> (binary floppy image). The case is "
#~ "sensitive for these fields."
#~ msgstr ""
#~ "将 Creator 改为 <userinput>ddsk</userinput> (Disk Copy)，并将 Type 改为 "
#~ "<userinput>DDim</userinput> (binary floppy image)。注意此处大小写敏感。"

#~ msgid ""
#~ "<emphasis>Important:</emphasis> In the Finder, use <userinput>Get Info</"
#~ "userinput> to display the Finder information about the floppy image, and "
#~ "<quote>X</quote> the <userinput>File Locked</userinput> check box so that "
#~ "MacOS will be unable to remove the boot blocks if the image is "
#~ "accidentally mounted."
#~ msgstr ""
#~ "<emphasis>注意：</emphasis> 在 Finder 中，使用 <userinput>Get Info</"
#~ "userinput> 来显示关于软盘映像的 Finder 信息，并在 <userinput>File Locked</"
#~ "userinput> 复选框中划上<quote>X</quote>。这样在映像意外的被挂载时 MacOS 将"
#~ "不会删除引导区。"

#~ msgid ""
#~ "Obtain <command>Disk Copy</command>; if you have a MacOS system or CD it "
#~ "will very likely be there already, otherwise try <ulink url=\"&url-"
#~ "powerpc-diskcopy;\"></ulink>."
#~ msgstr ""
#~ "获取 <command>Disk Copy</command>。如果您已经拥有了 MacOS 系统或光盘，它多"
#~ "半就已经被包含在其中，否则可以试试 <ulink url=\"&url-powerpc-diskcopy;"
#~ "\"></ulink>。"

#~ msgid ""
#~ "Run <command>Disk Copy</command>, and select <menuchoice> "
#~ "<guimenu>Utilities</guimenu> <guimenuitem>Make a Floppy</guimenuitem> </"
#~ "menuchoice>, then select the <emphasis>locked</emphasis> image file from "
#~ "the resulting dialog. It will ask you to insert a floppy, then ask if you "
#~ "really want to erase it. When done it should eject the floppy."
#~ msgstr ""
#~ "运行 <command>Disk Copy</command>，并且从 <userinput>Utilities</"
#~ "userinput> 菜单中选择 <guimenuitem>Make a Floppy</guimenuitem>，然后从对话"
#~ "框中选择 <emphasis>locked</emphasis> 的映像文件。它会要求您插入一张软盘，"
#~ "然后询问是否删除它。完成后它应该会弹出软盘。"

#~ msgid "Writing Disk Images with <command>suntar</command>"
#~ msgstr "写磁盘映像：使用<command>suntar</command>"

#~ msgid ""
#~ "Obtain <command>suntar</command> from <ulink url=\"&url-powerpc-suntar;"
#~ "\"> </ulink>. Start the <command>suntar</command> program and select "
#~ "<quote>Overwrite Sectors...</quote> from the <userinput>Special</"
#~ "userinput> menu."
#~ msgstr ""
#~ "获取 <command>suntar</command>，它在 <ulink url=\"&url-powerpc-suntar;\"> "
#~ "</ulink> 中。运行 <command>suntar</command> 程序并且从 "
#~ "<userinput>Special</userinput> 菜单中选择<quote>Overwrite Sectors...</"
#~ "quote>。"

#~ msgid ""
#~ "Insert the floppy disk as requested, then hit &enterkey; (start at sector "
#~ "0)."
#~ msgstr "按照要求插入软盘，然后点击 &enterkey; (从0扇区开始)。"

#~ msgid ""
#~ "Select the <filename>root.bin</filename> file in the file-opening dialog."
#~ msgstr "在打开文件对话框中选择 <filename>root.bin</filename> 文件。"

#~ msgid ""
#~ "After the floppy has been created successfully, select <menuchoice> "
#~ "<guimenu>File</guimenu> <guimenuitem>Eject</guimenuitem> </menuchoice>. "
#~ "If there are any errors writing the floppy, simply toss that floppy and "
#~ "try another."
#~ msgstr ""
#~ "当软盘被成功写入之后，选中 <menuchoice> <guimenu>File</guimenu> "
#~ "<guimenuitem>Eject</guimenuitem> </menuchoice>。如果写盘期间发生任何错误，"
#~ "请换别的软盘试试。"

#~ msgid ""
#~ "Before using the floppy you created, <emphasis>set the write protect tab</"
#~ "emphasis>! Otherwise if you accidentally mount it in MacOS, MacOS will "
#~ "helpfully ruin it."
#~ msgstr ""
#~ "在使用您创建的软盘之前，<emphasis>请设置写保护标签</emphasis>！否则，如果"
#~ "您偶然在 MacOS 中挂载了它，MacOS 将会将其毁坏。"

#~ msgid "Hard Disk Installer Booting for OldWorld Macs"
#~ msgstr "在 OldWorld Macs 上引导硬盘安装程序"

#~ msgid ""
#~ "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</"
#~ "application> to launch Linux installation, but <application>miBoot</"
#~ "application> cannot easily be used for hard disk booting. "
#~ "<application>BootX</application>, launched from MacOS, supports booting "
#~ "from files placed on the hard disk. <application>BootX</application> can "
#~ "also be used to dual-boot MacOS and Linux after your &debian; "
#~ "installation is complete. For the Performa 6360, it appears that "
#~ "<command>quik</command> cannot make the hard disk bootable. So "
#~ "<application>BootX</application> is required on that model."
#~ msgstr ""
#~ "<filename>boot-floppy-hfs</filename> 软盘使用 <application>miBoot</"
#~ "application> 来启动 Linux 安装，但是 <application>miBoot</application> 不"
#~ "易用于从硬盘引导。运行于 MacOS 的 <application>BootX</application> 支持从"
#~ "硬盘上的文件进行引导。<application>BootX</application> 也能在安装完 "
#~ "&debian; 后用于 MacOS 和 Linux 的双重引导。对于 Performa 6360 来说，"
#~ "<command>quik</command> 看上去不能让硬盘可引导。因此 <application>BootX</"
#~ "application> 对于该型号来说是必须的。"

#~ msgid ""
#~ "Download and unstuff the <application>BootX</application> distribution, "
#~ "available from <ulink url=\"&url-powerpc-bootx;\"></ulink>, or in the "
#~ "<filename>dists/woody/main/disks-powerpc/current/powermac</filename> "
#~ "directory on &debian; http/ftp mirrors and official &debian; CDs. Use "
#~ "<application>Stuffit Expander</application> to extract it from its "
#~ "archive. Within the package, there is an empty folder called "
#~ "<filename>Linux Kernels</filename>. Download <filename>linux.bin</"
#~ "filename> and <filename>ramdisk.image.gz</filename> from the "
#~ "<filename>disks-powerpc/current/powermac</filename> folder, and place "
#~ "them in the <filename>Linux Kernels</filename> folder. Then place the "
#~ "<filename>Linux Kernels</filename> folder in the active System Folder."
#~ msgstr ""
#~ "请下载并且解压 <application>BootX</application> 发布版本。它可以从 <ulink "
#~ "url=\"&url-powerpc-bootx;\"></ulink>，或者 &debian; http/ftp 镜像以及官方 "
#~ "&debian; 光盘的 <filename>dists/woody/main/disks-powerpc/current/"
#~ "powermac</filename> 目录下得到。可以用 <application>Stuffit Expander</"
#~ "application> 来把它从打包档案中解开。在这个包中，有一个名为 "
#~ "<filename>Linux Kernels</filename> 的空文件夹。请下载 <filename>linux."
#~ "bin</filename> 和 <filename>ramdisk.image.gz</filename> (位于 "
#~ "<filename>disks-powerpc/current/powermac</filename> 文件夹)，然后把他们放"
#~ "到 <filename>Linux Kernels</filename> 文件夹中，然后把 <filename>Linux "
#~ "Kernels</filename> 文件夹放到活动的系统文件夹中。"

#~ msgid "Hard Disk Installer Booting for NewWorld Macs"
#~ msgstr "在 NewWorld Macs 上启动硬盘安装程序"

#~ msgid ""
#~ "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, "
#~ "as well as loading ELF binaries directly from the hard disk. These "
#~ "machines will boot Linux directly via <command>yaboot</command>, which "
#~ "supports loading a kernel and RAMdisk directly from an ext2 partition, as "
#~ "well as dual-booting with MacOS. Hard disk booting of the installer is "
#~ "particularly appropriate for newer machines without floppy drives. "
#~ "<command>BootX</command> is not supported and must not be used on "
#~ "NewWorld PowerMacs."
#~ msgstr ""
#~ "NewWorld PowerMacs 支持从网络或者 ISO9660 格式光盘进行引导，或者直接从硬盘"
#~ "上载入 ELF 二进制文件。这类机器可以直接使用 <command>yaboot</command>引"
#~ "导。它既支持直接从 ext2 分区中装入内核和内存虚拟磁盘，也支持和 MacOS 的双"
#~ "重引导。硬盘引导特别适合最新的没有软驱的机器。<command>BootX</command> 则"
#~ "不被支持，也一定不能用在 NewWorld PowerMacs 上。"

#~ msgid ""
#~ "<emphasis>Copy</emphasis> (not move) the following four files which you "
#~ "downloaded earlier from the &debian; archives, onto the root level of "
#~ "your hard drive (this can be accomplished by <keycap>option</keycap>-"
#~ "dragging each file to the hard drive icon)."
#~ msgstr ""
#~ "<emphasis>复制</emphasis>(而非移动)您早先从 &debian; 存档下载的下列四个文"
#~ "件到您硬盘的根目录上(这个可以用按住 <keycap>option</keycap> 键然后拖动每个"
#~ "文件到硬盘图标的方法来完成)。"

#~ msgid ""
#~ "Make a note of the partition number of the MacOS partition where you "
#~ "place these files. If you have the MacOS <command>pdisk</command> "
#~ "program, you can use the <command>L</command> command to check for the "
#~ "partition number. You will need this partition number for the command you "
#~ "type at the Open Firmware prompt when you boot the installer."
#~ msgstr ""
#~ "记下您存放这些文件的 MacOS 分区号。如果您有 MacOS 的 <command>pdisk</"
#~ "command> 程序，您可以使用 <command>L</command> 命令检查分区号。当引导安装"
#~ "程序的时候，您需要这个分区号码在 Open Firmware 提示符下面输入命令。"

#~ msgid "To boot the installer, proceed to <xref linkend=\"boot-newworld\"/>."
#~ msgstr "要引导安装程序，请进入 <xref linkend=\"boot-newworld\"/>。"

#~ msgid ""
#~ "When downloading files from a &debian; mirror using FTP, be sure to "
#~ "download the files in <emphasis>binary</emphasis> mode, not text or "
#~ "automatic mode."
#~ msgstr ""
#~ "当使用 FTP 从 &debian; 镜像服务器下载文件的时候，请确认下载的文件是处于"
#~ "<emphasis>二进制</emphasis>模式，而不是文本或者自动模式。"

#~ msgid ""
#~ "<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /"
#~ "dev/<replaceable>sdX</replaceable></userinput>\n"
#~ "<prompt>#</prompt> <userinput>sync</userinput>"
#~ msgstr ""
#~ "<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /"
#~ "dev/<replaceable>sdX</replaceable></userinput>\n"
#~ "<prompt>#</prompt> <userinput>sync</userinput>"

#~ msgid "Thecus N2100 Installation Files"
#~ msgstr "Thecus N2100 安装文件"

#~ msgid ""
#~ "A firmware image is provided for the Thecus N2100 which will "
#~ "automatically boot <classname>debian-installer</classname>. This image "
#~ "can be installed using the Thecus firmware upgrade process. This firmware "
#~ "image can be obtained from &n2100-firmware-img;."
#~ msgstr ""
#~ "用于 Linksys NSLU2 的固件映像将自动引导 <classname>debian-installer</"
#~ "classname>。该映象可以使用 Thecus 固件升级程序安装。固件映像可以从 &nslu2-"
#~ "firmware-img; 获得。"

#~ msgid "GLAN Tank Installation Files"
#~ msgstr "GLAN Tank 安装文件"

#~ msgid ""
#~ "The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the "
#~ "disk on which you intend to install &debian;. These images can be "
#~ "obtained from &glantank-firmware-img;."
#~ msgstr ""
#~ "GLAN Tank 需要内核和 ramdisk，位于您打算安装 &debian; 的 ext2 磁盘分区上。"
#~ "这些映象可以从 &glantank-firmware-img; 获得。"

#~ msgid "Creating an IPL tape"
#~ msgstr "创建一个 IPL 磁带"

#~ msgid ""
#~ "If you can't boot (IPL) from the CD-ROM and you are not using VM you need "
#~ "to create an IPL tape first. This is described in section 3.4.3 in the "
#~ "<ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf"
#~ "\"> Linux for IBM eServer zSeries and S/390: Distributions</ulink> "
#~ "Redbook. The files you need to write to the tape are (in this order): "
#~ "<filename>kernel.debian</filename>, <filename>parmfile.debian</filename> "
#~ "and <filename>initrd.debian</filename>. The files can be downloaded from "
#~ "the <filename>tape</filename> sub-directory, see <xref linkend=\"where-"
#~ "files\"/>."
#~ msgstr ""
#~ "如果不能从光盘引导(IPL)并且没有使用 VM，您首先就需要创建一个 IPL 磁带。在 "
#~ "<ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf"
#~ "\"> Linux for IBM eServer zSeries and S/390: Distributions</ulink> "
#~ "Redbook 的第 3.4.3 节中有描述。您需要写到磁带上的文件是(按顺序): "
#~ "<filename>kernel.debian</filename>、<filename>parmfile.debian</filename> "
#~ "和 <filename>initrd.debian</filename>。这些文件可以从 <filename>tape</"
#~ "filename> 子目录下载，请参见 <xref linkend=\"where-files\"/>,"

#~ msgid ""
#~ "A special method can be used to add firmware to the <filename>mini.iso</"
#~ "filename>. First, write the <filename>mini.iso</filename> to the USB "
#~ "stick. Next obtain the necessary firmware files. See <xref linkend="
#~ "\"loading-firmware\"/> for more information about firmware. Now unplug "
#~ "and replug the USB stick, and two partitions should now be visible on it. "
#~ "You should mount the second of the two partitions, and unpack the "
#~ "firmware onto it."
#~ msgstr ""
#~ "有一个特殊的方法可以将固件加入 <filename>mini.iso</filename>。首先将 "
#~ "<filename>mini.iso</filename> 写入 U 盘。接着取得所需的固件。参阅 <xref "
#~ "linkend=\"loading-firmware\"/> 了解固件信息。然后拔插 U 盘，会有两个分区出"
#~ "现在 U 盘上。您应该挂载第二个分区，并将固件解压到里面。"