# Debian installation guide - translation into Ukranian # msgid "" msgstr "" "Project-Id-Version: install-methods_uk\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2020-05-29 21:04+0000\n" "PO-Revision-Date: 2019-09-03 08:32+0100\n" "Last-Translator: \n" "Language-Team: Ukranian\n" "Language: uk\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. Tag: title #: install-methods.xml:5 #, no-c-format msgid "Obtaining System Installation Media" msgstr "" #. Tag: title #: install-methods.xml:12 #, no-c-format msgid "Official &debian-gnu; installation images" msgstr "" #. Tag: para #: install-methods.xml:13 #, no-c-format msgid "" "By far the easiest way to install &debian-gnu; is from a set of official " "&debian; installation images. You can buy a set of CDs/DVDs from a vendor " "(see the CD vendors page). " "You may also download the installation images from a &debian; mirror and " "make your own set, if you have a fast network connection and a CD/DVD burner " "(see the Debian CD/DVD page and " "Debian CD FAQ for detailed " "instructions). If you have such optical installation media, and they are " "bootable on your machine, which is the case on all " "modern PCs, you can skip right to . Much effort has been expended to ensure the most-used files are on the " "first CD and DVD image, so that a basic desktop installation can be done " "with only the first DVD or - to a limited extent - even with only the first " "CD image." msgstr "" #. Tag: para #: install-methods.xml:30 #, no-c-format msgid "" "As CDs have a rather limited capacity by today's standards, not all " "graphical desktop environments are installable with only the first CD; for " "some desktop environments a CD installation requires either network " "connectivity during the installation to download the remaining files or " "additional CDs." msgstr "" #. Tag: para #: install-methods.xml:38 #, no-c-format msgid "" "Also, keep in mind: if the installation media you are using don't contain " "some packages you need, you can always install those packages afterwards " "from your running new Debian system (after the installation has finished). " "If you need to know on which installation image to find a specific package, " "visit https://cdimage-" "search.debian.org/." msgstr "" #. Tag: para #: install-methods.xml:46 #, no-c-format msgid "" "If your machine doesn't support booting from optical media (only relevant on very old PC systems), but you do have a " "set of CD/DVD, you can use an alternative strategy such as VM reader, hard disk, usb stick, net boot, or manually loading the " "kernel from the disc to initially boot the system installer. The files you " "need for booting by another means are also on the disc; the &debian; network " "archive and folder organization on the disc are identical. So when archive " "file paths are given below for particular files you need for booting, look " "for those files in the same directories and subdirectories on your " "installation media." msgstr "" #. Tag: para #: install-methods.xml:67 #, no-c-format msgid "" "Once the installer is booted, it will be able to obtain all the other files " "it needs from the disc." msgstr "" #. Tag: para #: install-methods.xml:72 #, no-c-format msgid "" "If you don't have an installation media set, then you will need to download " "the installer system files and place them on the VM " "minidisk hard disk or " "usb stick or a connected computer so they can be used to boot " "the installer." msgstr "" #. Tag: title #: install-methods.xml:96 #, no-c-format msgid "Downloading Files from &debian; Mirrors" msgstr "" #. Tag: para #: install-methods.xml:98 #, no-c-format msgid "" "To find the nearest (and thus probably the fastest) mirror, see the list of &debian; mirrors." msgstr "" #. Tag: title #: install-methods.xml:106 #, no-c-format msgid "Where to Find Installation Images" msgstr "" #. Tag: para #: install-methods.xml:108 #, no-c-format msgid "" "The installation images are located on each &debian; mirror in the directory " "debian/dists/&releasename;/main/" "installer-&architecture;/current/images/ — the MANIFEST lists each image " "and its purpose." msgstr "" #. Tag: title #: install-methods.xml:120 #, no-c-format msgid "Kurobox Pro Installation Files" msgstr "" #. Tag: para #: install-methods.xml:121 #, no-c-format msgid "" "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the " "disk on which you intend to install &debian;. These images can be obtained " "from &kuroboxpro-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:131 #, no-c-format msgid "HP mv2120 Installation Files" msgstr "" #. Tag: para #: install-methods.xml:132 #, no-c-format msgid "" "A firmware image is provided for the HP mv2120 which will automatically boot " "debian-installer. This image can be installed with " "uphpmvault on Linux and other systems and with the HP Media Vault Firmware " "Recovery Utility on Windows. The firmware image can be obtained from &mv2120-" "firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:144 #, no-c-format msgid "QNAP Turbo Station Installation Files" msgstr "" #. Tag: para #: install-methods.xml:145 #, no-c-format msgid "" "The installation files for the QNAP Turbo Station consist of a kernel and " "ramdisk as well as a script to write these images to flash. You can obtain " "the installation files for QNAP TS-11x/TS-12x, HS-210, TS-21x/TS-22x and " "TS-41x/TS-42x models from &qnap-kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:156 #, no-c-format msgid "Plug Computer and OpenRD Installation Files" msgstr "" #. Tag: para #: install-methods.xml:157 #, no-c-format msgid "" "The installation files for plug computers (SheevaPlug, GuruPlug, DreamPlug " "etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can " "obtain these files from &kirkwood-marvell-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:167 #, no-c-format msgid "LaCie NASes Installation Files" msgstr "" #. Tag: para #: install-methods.xml:168 #, no-c-format msgid "" "The installation files for LaCie NASes (Network Space v2, Network Space Max " "v2, Internet Space v2, d2 Network v2, 2Big Network v2 and 5Big Network v2) " "consist of a kernel and initrd for U-Boot. You can obtain these files from " "&lacie-kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:179 #, no-c-format msgid "Armhf Multiplatform Installation Files" msgstr "" #. Tag: para #: install-methods.xml:180 #, no-c-format msgid "" "The installation files for systems supported by the armhf multiplatform " "kernel (see ) consist of " "a standard Linux kernel image, a standard Linux initial ramdisk image and a " "system-specific device-tree blob. The kernel and the initial ramdisk image " "for tftp-booting can be obtained from &armmp-firmware-img; and the device-" "tree blob can be obtained from &armmp-dtb-img;. The tar archive for creating " "a bootable USB stick with the installer can be obtained from &armmp-hd-media-" "tarball;." msgstr "" #. Tag: para #: install-methods.xml:192 #, no-c-format msgid "" "U-boot images for various armhf platforms are available at &armmp-uboot-img;." msgstr "" #. Tag: title #: install-methods.xml:238 #, no-c-format msgid "Preparing Files for USB Memory Stick Booting" msgstr "" #. Tag: para #: install-methods.xml:240 #, no-c-format msgid "" "To prepare the USB stick, we recommend to use a system where GNU/Linux is " "already running and where USB is supported. With current GNU/Linux systems " "the USB stick should be automatically recognized when you insert it. If it " "is not you should check that the usb-storage kernel module is loaded. When " "the USB stick is inserted, it will be mapped to a device named /" "dev/sdX, where the X is a letter in the range a-z. " "You should be able to see to which device the USB stick was mapped by " "running the command dmesg after inserting it. To write to " "your stick, you may have to turn off its write protection switch." msgstr "" #. Tag: para #: install-methods.xml:253 #, no-c-format msgid "" "The procedures described in this section will destroy anything already on " "the device! Make very sure that you use the correct device name for your USB " "stick. If you use the wrong device the result could be that all information " "on for example a hard disk could be lost." msgstr "" #. Tag: title #: install-methods.xml:263 #, no-c-format msgid "Preparing a USB stick using a hybrid CD/DVD image" msgstr "" #. Tag: para #: install-methods.xml:264 #, no-c-format msgid "" "Debian installation images can now be written directly to a USB stick, which " "is a very easy way to make a bootable USB stick. Simply choose an image " "(such as the netinst, CD, DVD-1, or netboot) that will fit on your USB " "stick. See to get an installation image." msgstr "" #. Tag: para #: install-methods.xml:272 #, no-c-format msgid "" "Alternatively, for very small USB sticks, only a few megabytes in size, you " "can download the &netboot-mini-iso; image from the netboot directory (at the location mentioned in )." msgstr "" #. Tag: para #: install-methods.xml:279 #, no-c-format msgid "" "The installation image you choose should be written directly to the USB " "stick, overwriting its current contents. For example, when using an existing " "GNU/Linux system, the image file can be written to a USB stick as follows, " "after having made sure that the stick is unmounted: " "\n" "# cp debian.iso /dev/" "sdX\n" "# sync\n" " Information about how to do this on other " "operating systems can be found in the Debian CD FAQ." msgstr "" #. Tag: para #: install-methods.xml:291 #, no-c-format msgid "" "The image must be written to the whole-disk device and not a partition, e." "g. /dev/sdb and not /dev/sdb1. Do not use tools like unetbootin which alter the image." msgstr "" #. Tag: para #: install-methods.xml:297 #, no-c-format msgid "" "Simply writing the installation image to USB like this should work fine for " "most users. The other options below are more complex, mainly for people with " "specialised needs." msgstr "" #. Tag: para #: install-methods.xml:305 #, no-c-format msgid "" "The hybrid image on the stick does not occupy all the storage space, so it " "may be worth considering using the free space to hold firmware files or " "packages or any other files of your choice. This could be useful if you have " "only one stick or just want to keep everything you need on one device." msgstr "" #. Tag: para #: install-methods.xml:313 #, no-c-format msgid "" "Create a second, FAT partition on the stick, mount the partition and copy or " "unpack the firmware onto it. For example:" msgstr "" #. Tag: screen #: install-methods.xml:318 #, no-c-format msgid "" "# mount /dev/sdX2 /mnt\n" "# cd /mnt\n" "# tar zxvf /path/to/firmware.tar.gz\n" "# cd /\n" "# umount /mnt" msgstr "" #. Tag: para #: install-methods.xml:320 #, no-c-format msgid "" "You might have written the mini.iso to the USB stick. " "In this case the second partition doesn't have to be created as, very " "nicely, it will already be present. Unplugging and replugging the USB stick " "should make the two partitions visible." msgstr "" #. Tag: title #: install-methods.xml:334 #, no-c-format msgid "Manually copying files to the USB stick" msgstr "" #. Tag: para #: install-methods.xml:335 #, no-c-format msgid "" "An alternative way to set up your USB stick is to manually copy the " "installer files, and also an installation image to it. Note that the USB " "stick should be at least 1 GB in size (smaller setups are possible if you " "follow )." msgstr "" #. Tag: para #: install-methods.xml:342 #, no-c-format msgid "" "There is an all-in-one file &hdmedia-boot-img; which contains all the " "installer files (including the kernel) as well as " "syslinux and its configuration file as well as yaboot and its " "configuration file." msgstr "" #. Tag: para #: install-methods.xml:351 #, no-c-format msgid "" "Note that, although convenient, this method does have one major " "disadvantage: the logical size of the device will be limited to 1 GB, even " "if the capacity of the USB stick is larger. You will need to repartition the " "USB stick and create new file systems to get its full capacity back if you " "ever want to use it for some different purpose." msgstr "" #. Tag: para #: install-methods.xml:359 #, no-c-format msgid "To use this image simply extract it directly to your USB stick:" msgstr "" #. Tag: screen #: install-methods.xml:363 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX" msgstr "" #. Tag: para #: install-methods.xml:365 #, no-c-format msgid "" "Create a partition of type \"Apple_Bootstrap\" on your USB stick using " "mac-fdisk's C command and extract " "the image directly to that:" msgstr "" #. Tag: screen #: install-methods.xml:371 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX2" msgstr "" #. Tag: para #: install-methods.xml:373 #, no-c-format msgid "" "After that, mount the USB memory stick (mount /dev/sdX /mnt), (mount /dev/" "sdX2 /mnt), which will now " "have a FAT filesystem an HFS filesystem on it, and copy a &debian; ISO image (netinst " "or full CD/DVD) to it. Unmount the stick (umount /mnt) and you are done." msgstr "" #. Tag: title #: install-methods.xml:390 #, no-c-format msgid "Manually copying files to the USB stick — the flexible way" msgstr "" #. Tag: para #: install-methods.xml:391 #, no-c-format msgid "" "If you like more flexibility or just want to know what's going on, you " "should use the following method to put the files on your stick. One " "advantage of using this method is that — if the capacity of your USB " "stick is large enough — you have the option of copying any ISO image, " "even a DVD image, to it." msgstr "" #. Tag: title #: install-methods.xml:406 install-methods.xml:528 #, no-c-format msgid "Partitioning the USB stick" msgstr "" #. Tag: para #: install-methods.xml:407 #, no-c-format msgid "" "We will show how to set up the memory stick to use the first partition, " "instead of the entire device." msgstr "" #. Tag: para #: install-methods.xml:412 #, no-c-format msgid "" "Since most USB sticks come pre-configured with a single FAT16 partition, you " "probably won't have to repartition or reformat the stick. If you have to do " "that anyway, use cfdisk or any other partitioning tool to " "create a FAT16 partition Don't forget to set the " "bootable bootable flag. , install an MBR " "using: \n" "# install-mbr /dev/sdX\n" " The install-mbr command is " "contained in the mbr &debian; package. Then create " "the filesystem using: \n" "# mkdosfs /dev/sdX1\n" " Take care that you use the correct device name " "for your USB stick. The mkdosfs command is contained in " "the dosfstools &debian; package." msgstr "" #. Tag: para #: install-methods.xml:436 #, no-c-format msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. Although any boot loader should work, it's " "convenient to use syslinux, since it uses a FAT16 " "partition and can be reconfigured by just editing a text file. Any operating " "system which supports the FAT file system can be used to make changes to the " "configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:446 #, no-c-format msgid "" "To put syslinux on the FAT16 partition on your USB " "stick, install the syslinux and mtools packages on your system, and do: \n" "# syslinux /dev/sdX1\n" " Again, take care that you use the correct device " "name. The partition must not be mounted when starting syslinux. This procedure writes a boot sector to the partition and creates " "the file ldlinux.sys which contains the boot loader " "code." msgstr "" #. Tag: title #: install-methods.xml:463 install-methods.xml:575 #, no-c-format msgid "Adding the installer image" msgstr "" #. Tag: para #: install-methods.xml:464 #, no-c-format msgid "" "Mount the partition (mount /dev/sdX1 /" "mnt) and copy the following installer image files to the stick: " " vmlinuz or " "linux (kernel binary) " " initrd.gz (initial ramdisk image) You can choose between either the text-" "based or the graphical version of the installer. The latter can be found in " "the gtk subdirectory. If you want to rename the files, " "please note that syslinux can only process DOS (8.3) " "file names." msgstr "" #. Tag: para #: install-methods.xml:488 #, no-c-format msgid "" "Next you should create a syslinux.cfg configuration " "file, which at a bare minimum should contain the following line (change the " "name of the kernel binary to linux if " "you used a netboot image): \n" "default vmlinuz initrd=initrd.gz\n" " For the graphical installer you should add " "vga=788 to the line. Other parameters can be appended " "as desired." msgstr "" #. Tag: para #: install-methods.xml:500 #, no-c-format msgid "" "To enable the boot prompt to permit further parameter appending, add a " "prompt 1 line." msgstr "" #. Tag: para #: install-methods.xml:505 #, no-c-format msgid "" "If you used an hd-media image, you should now copy the " "ISO file of a &debian; ISO image You can use either a " "netinst or a full CD/DVD image (see ). Be " "sure to select one that fits. Note that the netboot mini." "iso image is not usable for this purpose. onto the stick. When you are done, unmount the USB memory stick " "(umount /mnt)." msgstr "" #. Tag: para #: install-methods.xml:529 #, no-c-format msgid "" "Most USB sticks do not come pre-configured in such a way that Open Firmware " "can boot from them, so you will need to repartition the stick. On Mac " "systems, run mac-fdisk /dev/sdX, initialise a new partition map using the i command, and create a new partition of type Apple_Bootstrap using " "the C command. (Note that the first \"partition\" " "will always be the partition map itself.) Then type " "\n" "$ hformat /dev/sdX2\n" " Take care that you use the correct device name " "for your USB stick. The hformat command is contained in " "the hfsutils &debian; package." msgstr "" #. Tag: para #: install-methods.xml:546 #, no-c-format msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. The yaboot boot loader can be " "installed on an HFS filesystem and can be reconfigured by just editing a " "text file. Any operating system which supports the HFS file system can be " "used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:555 #, no-c-format msgid "" "The normal ybin tool that comes with yaboot does not yet understand USB storage devices, so you will have to " "install yaboot by hand using the hfsutils tools. Type \n" "$ hmount /dev/sdX2\n" "$ hcopy -r /usr/lib/yaboot/yaboot :\n" "$ hattrib -c UNIX -t tbxi :yaboot\n" "$ hattrib -b :\n" "$ humount\n" " Again, take care that you use the correct device " "name. The partition must not be otherwise mounted during this procedure. " "This procedure writes the boot loader to the partition, and uses the HFS " "utilities to mark it in such a way that Open Firmware will boot it. Having " "done this, the rest of the USB stick may be prepared using the normal Unix " "utilities." msgstr "" #. Tag: para #: install-methods.xml:576 #, no-c-format msgid "" "Mount the partition (mount /dev/sdX2 /" "mnt) and copy the following installer image files to the stick:" msgstr "" #. Tag: para #: install-methods.xml:583 #, no-c-format msgid "vmlinux (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:588 #, no-c-format msgid "initrd.gz (initial ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:593 #, no-c-format msgid "yaboot.conf (yaboot configuration file)" msgstr "" #. Tag: para #: install-methods.xml:598 #, no-c-format msgid "boot.msg (optional boot message)" msgstr "" #. Tag: para #: install-methods.xml:605 #, no-c-format msgid "" "The yaboot.conf configuration file should contain the " "following lines: \n" "default=install\n" "root=/dev/ram\n" "\n" "message=/boot.msg\n" "\n" "image=/vmlinux\n" " label=install\n" " initrd=/initrd.gz\n" " initrd-size=10000\n" " read-only\n" " Please note that the initrd-size parameter may need to be increased, depending on the image you " "are booting." msgstr "" #. Tag: para #: install-methods.xml:615 #, no-c-format msgid "" "If you used an hd-media image, you should now copy the " "ISO file of a &debian; ISO image You can use either a " "netinst or a full CD image (see ). Be sure " "to select one that fits. Note that the netboot mini.iso image is not usable for this purpose. " "onto the stick. When you are done, unmount the USB memory stick " "(umount /mnt)." msgstr "" #. Tag: title #: install-methods.xml:643 #, no-c-format msgid "Preparing Files for Hard Disk Booting" msgstr "" #. Tag: para #: install-methods.xml:644 #, no-c-format msgid "" "The installer may be booted using boot files placed on an existing hard " "drive partition, either launched from another operating system or by " "invoking a boot loader directly from the BIOS." msgstr "" #. Tag: para #: install-methods.xml:650 #, no-c-format msgid "" "A full, pure network installation can be achieved using this " "technique. This avoids all hassles of removable media, like finding and " "burning CD/DVD images." msgstr "" #. Tag: para #: install-methods.xml:656 #, no-c-format msgid "" "The installer cannot boot from files on an HFS+ file system. MacOS System " "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To " "determine whether your existing file system is HFS+, select Get " "Info for the volume in question. HFS file systems appear as " "Mac OS Standard, while HFS+ file systems say " "Mac OS Extended. You must have an HFS partition in " "order to exchange files between MacOS and Linux, in particular the " "installation files you download." msgstr "" #. Tag: para #: install-methods.xml:667 #, no-c-format msgid "" "Different programs are used for hard disk installation system booting, " "depending on whether the system is a NewWorld or an " "OldWorld model." msgstr "" #. Tag: title #: install-methods.xml:676 #, no-c-format msgid "Hard disk installer booting from Linux using GRUB" msgstr "" #. Tag: para #: install-methods.xml:678 #, no-c-format msgid "" "This section explains how to add to or even replace an existing linux " "installation using GRUB." msgstr "" #. Tag: para #: install-methods.xml:684 #, no-c-format msgid "" "At boot time, GRUB supports loading in memory not only " "the kernel, but also a disk image. This RAM disk can be used as the root " "file-system by the kernel." msgstr "" #. Tag: para #: install-methods.xml:690 #, no-c-format msgid "" "Copy the following files from the &debian; archives to a convenient location " "on your hard drive, for instance to /boot/newinstall/." msgstr "" #. Tag: para #: install-methods.xml:697 #, no-c-format msgid "vmlinuz (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:702 #, no-c-format msgid "initrd.gz (ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:709 #, no-c-format msgid "" "If you intend to use the hard drive only for booting and then download " "everything over the network, you should download the &x86-netboot-initrd; " "file and its corresponding kernel &x86-netboot-linux;. This will allow you " "to repartition the hard disk from which you boot the installer, although you " "should do so with care." msgstr "" #. Tag: para #: install-methods.xml:718 #, no-c-format msgid "" "Alternatively, if you intend to keep an existing partition on the hard drive " "unchanged during the install, you can download the &x86-hdmedia-initrd; file " "and its kernel &x86-hdmedia-vmlinuz;, as well as copy an installation image " "to the hard drive (make sure the file is named ending in .iso). The installer can then boot from the hard drive and install from " "the installation image, without needing the network." msgstr "" #. Tag: para #: install-methods.xml:726 #, no-c-format msgid "" "Finally, to configure the bootloader proceed to ." msgstr "" #. Tag: title #: install-methods.xml:736 #, no-c-format msgid "Hard disk installer booting from DOS using loadlin" msgstr "" #. Tag: para #: install-methods.xml:737 #, no-c-format msgid "" "This section explains how to prepare your hard drive for booting the " "installer from DOS using loadlin." msgstr "" #. Tag: para #: install-methods.xml:742 #, no-c-format msgid "" "Copy the following directories from a &debian; installation image to " "c:\\." msgstr "" #. Tag: para #: install-methods.xml:747 #, no-c-format msgid "" "/&x86-install-dir; (kernel binary and ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:752 #, no-c-format msgid "/tools (loadlin tool)" msgstr "" #. Tag: title #: install-methods.xml:864 #, no-c-format msgid "Preparing Files for TFTP Net Booting" msgstr "" #. Tag: para #: install-methods.xml:865 #, no-c-format msgid "" "If your machine is connected to a local area network, you may be able to " "boot it over the network from another machine, using TFTP. If you intend to " "boot the installation system from another machine, the boot files will need " "to be placed in specific locations on that machine, and the machine " "configured to support booting of your specific machine." msgstr "" #. Tag: para #: install-methods.xml:873 #, no-c-format msgid "" "You need to set up a TFTP server, and for many machines a DHCP server, or RARP server, or BOOTP server." msgstr "" #. Tag: para #: install-methods.xml:880 #, no-c-format msgid "" "The Reverse Address Resolution Protocol " "(RARP) is one way to tell your client what IP address to use for itself. " "Another way is to use the BOOTP protocol. BOOTP is an IP protocol that informs a computer of its IP " "address and where on the network to obtain a boot image. The DHCP " "(Dynamic Host Configuration Protocol) is a more flexible, backwards-" "compatible extension of BOOTP. Some systems can only be configured via DHCP." msgstr "" #. Tag: para #: install-methods.xml:894 #, no-c-format msgid "" "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good " "idea to use DHCP instead of BOOTP. Some of the latest machines are unable to " "boot using BOOTP." msgstr "" #. Tag: para #: install-methods.xml:900 #, no-c-format msgid "" "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There " "is an rbootd package available in &debian;." msgstr "" #. Tag: para #: install-methods.xml:905 #, no-c-format msgid "" "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to " "the client. Theoretically, any server, on any platform, which implements " "these protocols, may be used. In the examples in this section, we shall " "provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux." msgstr "" #. Tag: para #: install-methods.xml:913 #, no-c-format msgid "" "For a &debian-gnu; server we recommend tftpd-hpa. " "It's written by the same author as the syslinux " "bootloader and is therefore least likely to cause issues. A good alternative " "is atftpd." msgstr "" #. Tag: title #: install-methods.xml:929 #, no-c-format msgid "Setting up RARP server" msgstr "" #. Tag: para #: install-methods.xml:930 #, no-c-format msgid "" "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " "address) of the client computers to be installed. If you don't know this " "information, you can pick it off the initial " "OpenPROM boot messages, use the OpenBoot .enet-addr " "command, or boot into Rescue mode and use the " "command ip addr show dev eth0." msgstr "" #. Tag: para #: install-methods.xml:942 #, no-c-format msgid "" "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the " "rarpd program. You need to ensure that the Ethernet " "hardware address for the client is listed in the ethers " "database (either in the /etc/ethers file, or via NIS/NIS" "+) and in the hosts database. Then you need to start the RARP " "daemon. Issue the command (as root): /usr/sbin/rarpd -a on most Linux systems and SunOS 5 (Solaris 2), /usr/" "sbin/in.rarpd -a on some other Linux systems, or /usr/" "etc/rarpd -a in SunOS 4 (Solaris 1)." msgstr "" #. Tag: title #: install-methods.xml:963 #, no-c-format msgid "Setting up a DHCP server" msgstr "" #. Tag: para #: install-methods.xml:964 #, no-c-format msgid "" "One free software DHCP server is ISC dhcpd. For &debian-" "gnu;, the isc-dhcp-server package is recommended. " "Here is a sample configuration file for it (see /etc/dhcp/dhcpd." "conf):" msgstr "" #. Tag: screen #: install-methods.xml:971 #, no-c-format msgid "" "option domain-name \"example.com\";\n" "option domain-name-servers ns1.example.com;\n" "option subnet-mask 255.255.255.0;\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "server-name \"servername\";\n" "\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option routers 192.168.1.1;\n" "}\n" "\n" "host clientname {\n" " filename \"/tftpboot.img\";\n" " server-name \"servername\";\n" " next-server servername;\n" " hardware ethernet 01:23:45:67:89:AB;\n" " fixed-address 192.168.1.90;\n" "}" msgstr "" #. Tag: para #: install-methods.xml:973 #, no-c-format msgid "" "In this example, there is one server servername " "which performs all of the work of DHCP server, TFTP server, and network " "gateway. You will almost certainly need to change the domain-name options, " "as well as the server name and client hardware address. The " "filename option should be the name of the file " "which will be retrieved via TFTP." msgstr "" #. Tag: para #: install-methods.xml:983 #, no-c-format msgid "" "After you have edited the dhcpd configuration file, " "restart it with /etc/init.d/isc-dhcp-server restart." msgstr "" #. Tag: title #: install-methods.xml:991 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "" #. Tag: para #: install-methods.xml:992 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-" "boot Execution Environment (PXE) method of TFTP. \n" "option domain-name \"example.com\";\n" "\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "\n" "allow booting;\n" "allow bootp;\n" "\n" "# The next paragraph needs to be modified to fit your case\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option broadcast-address 192.168.1.255;\n" "# the gateway address which can be different\n" "# (access to the internet for instance)\n" " option routers 192.168.1.1;\n" "# indicate the dns you want to use\n" " option domain-name-servers 192.168.1.3;\n" "}\n" "\n" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"pxelinux.0\";\n" " }\n" "}\n" " Note that for PXE booting, the client filename " "pxelinux.0 is a boot loader, not a kernel image (see " " below)." msgstr "" #. Tag: para #: install-methods.xml:1002 #, no-c-format msgid "" "If your machine uses UEFI to boot, you will have to specify a boot loader " "appropriate for UEFI machines, for example" msgstr "" #. Tag: screen #: install-methods.xml:1006 #, no-c-format msgid "" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"debian-installer/amd64/bootnetx64.efi\";\n" " }\n" "}" msgstr "" #. Tag: title #: install-methods.xml:1019 #, no-c-format msgid "Setting up a BOOTP server" msgstr "" #. Tag: para #: install-methods.xml:1020 #, no-c-format msgid "" "There are two BOOTP servers available for GNU/Linux. The first is CMU " "bootpd. The other is actually a DHCP server: ISC " "dhcpd. In &debian-gnu; these are contained in the " "bootp and isc-dhcp-server " "packages respectively." msgstr "" #. Tag: para #: install-methods.xml:1028 #, no-c-format msgid "" "To use CMU bootpd, you must first uncomment (or add) the " "relevant line in /etc/inetd.conf. On &debian-gnu;, you " "can run update-inetd --enable bootps, then " "/etc/init.d/inetd reload to do so. Just in case your " "BOOTP server does not run &debian;, the line in question should look like: " "\n" "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" " Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " "good old BSD printcap, termcap, " "and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " "Here is an example /etc/bootptab: " "\n" "client:\\\n" " hd=/tftpboot:\\\n" " bf=tftpboot.img:\\\n" " ip=192.168.1.90:\\\n" " sm=255.255.255.0:\\\n" " sa=192.168.1.1:\\\n" " ha=0123456789AB:\n" " You will need to change at least the ha option, which specifies the hardware address of the client. The " "bf option specifies the file a client should retrieve via " "TFTP; see for more details. On SGI machines you can just enter the command monitor and type " "printenv. The value of the eaddr variable is the machine's MAC address. " msgstr "" #. Tag: para #: install-methods.xml:1061 #, no-c-format msgid "" "By contrast, setting up BOOTP with ISC dhcpd is really " "easy, because it treats BOOTP clients as a moderately special case of DHCP " "clients. Some architectures require a complex configuration for booting " "clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " "adding the allow bootp directive to the configuration " "block for the subnet containing the client in /etc/dhcp/dhcpd." "conf, and restart dhcpd with /etc/" "init.d/isc-dhcp-server restart." msgstr "" #. Tag: title #: install-methods.xml:1080 #, no-c-format msgid "Enabling the TFTP Server" msgstr "" #. Tag: para #: install-methods.xml:1081 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that " "tftpd is enabled." msgstr "" #. Tag: para #: install-methods.xml:1086 #, no-c-format msgid "" "In the case of tftpd-hpa there are two ways the " "service can be run. It can be started on demand by the system's " "inetd daemon, or it can be set up to run as an " "independent daemon. Which of these methods is used is selected when the " "package is installed and can be changed by reconfiguring the package." msgstr "" #. Tag: para #: install-methods.xml:1095 #, no-c-format msgid "" "Historically, TFTP servers used /tftpboot as directory " "to serve images from. However, &debian-gnu; packages may use other " "directories to comply with the Filesystem " "Hierarchy Standard. For example, tftpd-hpa by " "default uses /srv/tftp. You may have to adjust the " "configuration examples in this section accordingly." msgstr "" #. Tag: para #: install-methods.xml:1105 #, no-c-format msgid "" "All in.tftpd alternatives available in &debian; should " "log TFTP requests to the system logs by default. Some of them support a " "-v argument to increase verbosity. It is recommended " "to check these log messages in case of boot problems as they are a good " "starting point for diagnosing the cause of errors." msgstr "" #. Tag: para #: install-methods.xml:1113 #, no-c-format msgid "" "If you intend to install &debian; on an SGI machine and your TFTP server is " "a GNU/Linux box running Linux 2.4, you'll need to set the following on your " "server: \n" "# echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc\n" " to turn off Path MTU discovery, otherwise the " "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets " "are sent from a source port no greater than 32767, or the download will " "stall after the first packet. Again, it's Linux 2.4.X tripping this bug in " "the PROM, and you can avoid it by setting \n" "# echo \"2048 32767\" > /proc/sys/net/ipv4/ip_local_port_range\n" " to adjust the range of source ports the Linux " "TFTP server uses." msgstr "" #. Tag: title #: install-methods.xml:1135 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "" #. Tag: para #: install-methods.xml:1136 #, no-c-format msgid "" "Next, place the TFTP boot image you need, as found in , in the tftpd boot image directory. You may " "have to make a link from that file to the file which tftpd will use for booting a particular client. Unfortunately, the file " "name is determined by the TFTP client, and there are no strong standards." msgstr "" #. Tag: para #: install-methods.xml:1145 #, no-c-format msgid "" "On NewWorld Power Macintosh machines, you will need to set up the " "yaboot boot loader as the TFTP boot image. " "Yaboot will then retrieve the kernel and RAMdisk images " "via TFTP itself. You will need to download the following files from the " "netboot/ directory:" msgstr "" #. Tag: filename #: install-methods.xml:1156 #, no-c-format msgid "vmlinux" msgstr "" #. Tag: filename #: install-methods.xml:1161 #, no-c-format msgid "initrd.gz" msgstr "" #. Tag: filename #: install-methods.xml:1166 #, no-c-format msgid "yaboot" msgstr "" #. Tag: filename #: install-methods.xml:1171 #, no-c-format msgid "yaboot.conf" msgstr "" #. Tag: filename #: install-methods.xml:1176 #, no-c-format msgid "boot.msg" msgstr "" #. Tag: para #: install-methods.xml:1181 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass pxelinux.0 to " "tftpd as the filename to boot. For UEFI machines, you " "will need to pass an appropriate EFI boot image name (such as /" "debian-installer/amd64/bootnetx64.efi)." msgstr "" #. Tag: para #: install-methods.xml:1191 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass /debian-installer/ia64/" "elilo.efi to tftpd as the filename to boot." msgstr "" #. Tag: title #: install-methods.xml:1203 #, no-c-format msgid "SPARC TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1204 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as " "SUN4M or SUN4C, to the filename. Thus, if your " "system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename " "would be C0A80103.SUN4C. However, there are also " "subarchitectures where the file the client looks for is just " "client-ip-in-hex. An easy way to determine the " "hexadecimal code for the IP address is to enter the following command in a " "shell (assuming the machine's intended IP is 10.0.0.4). " "\n" "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n" " To get to the correct filename, you will need to " "change all letters to uppercase and if necessary append the subarchitecture " "name." msgstr "" #. Tag: para #: install-methods.xml:1220 #, no-c-format msgid "" "If you've done all this correctly, giving the command boot net from the OpenPROM should load the image. If the image cannot be " "found, try checking the logs on your tftp server to see which image name is " "being requested." msgstr "" #. Tag: para #: install-methods.xml:1227 #, no-c-format msgid "" "You can also force some sparc systems to look for a specific file name by " "adding it to the end of the OpenPROM boot command, such as boot " "net my-sparc.image. This must still reside in the directory that " "the TFTP server looks in." msgstr "" #. Tag: title #: install-methods.xml:1238 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1239 #, no-c-format msgid "" "On SGI machines you can rely on the bootpd to supply the " "name of the TFTP file. It is given either as the bf= " "in /etc/bootptab or as the filename= option in /etc/dhcpd.conf." msgstr "" #. Tag: title #: install-methods.xml:1347 #, no-c-format msgid "Automatic Installation" msgstr "" #. Tag: para #: install-methods.xml:1348 #, no-c-format msgid "" "For installing on multiple computers it's possible to do fully automatic " "installations. &debian; packages intended for this include fai-" "quickstart (which can use an install server) and the &debian; " "Installer itself. Have a look at the FAI home page for detailed information." msgstr "" #. Tag: title #: install-methods.xml:1360 #, no-c-format msgid "Automatic Installation Using the &debian; Installer" msgstr "" #. Tag: para #: install-methods.xml:1361 #, no-c-format msgid "" "The &debian; Installer supports automating installs via preconfiguration " "files. A preconfiguration file can be loaded from the network or from " "removable media, and used to fill in answers to questions asked during the " "installation process." msgstr "" #. Tag: para #: install-methods.xml:1368 #, no-c-format msgid "" "Full documentation on preseeding including a working example that you can " "edit is in ." msgstr ""