# SOME DESCRIPTIVE TITLE. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: d-i-manual_install-methods\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2016-04-08 20:25+0000\n" "PO-Revision-Date: 2016-04-08 20:25+0000\n" "Last-Translator: NAME \n" "Language-Team: Tagalog \n" "Language: tl\n" "MIME-Version: 1.0\n" "Content-Type: application/x-xml2pot; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Tag: title #: install-methods.xml:5 #, no-c-format msgid "Obtaining System Installation Media" msgstr "" #. Tag: title #: install-methods.xml:12 #, no-c-format msgid "Official &debian-gnu; CD/DVD-ROM Sets" msgstr "" #. Tag: para #: install-methods.xml:13 #, no-c-format msgid "" "By far the easiest way to install &debian-gnu; is from an Official &debian; " "CD/DVD-ROM Set. You can buy a set from a vendor (see the CD vendors page). You may also download the CD/" "DVD-ROM images from a &debian; mirror and make your own set, if you have a " "fast network connection and a CD/DVD burner (see the Debian CD page and Debian CD FAQ for detailed instructions). If you have a &debian; " "CD/DVD set and CDs/DVDs are bootable on your machine, " "which is the case on all modern PCs, you can skip right to . Much effort has been expended to ensure the " "most-used files are on the first CDs and DVDs, so that a basic desktop " "installation can be done with only the first DVD or - to a limited extent - " "even with only the first CD." msgstr "" #. Tag: para #: install-methods.xml:30 #, no-c-format msgid "" "As CDs have a rather limited capacity by today's standards, not all " "graphical desktop environments are installable with only the first CD; for " "some desktop environments a CD installation requires either network " "connectivity during the installation to download the remaining files or " "additional CDs." msgstr "" #. Tag: para #: install-methods.xml:38 #, no-c-format msgid "" "If your machine doesn't support CD booting (only " "relevant on very old PC systems), but you do have a CD set, you can " "use an alternative strategy such as floppy disk, VM reader, hard disk, usb stick, net boot, or manually loading the kernel from the CD to initially boot the " "system installer. The files you need for booting by another means are also " "on the CD; the &debian; network archive and CD folder organization are " "identical. So when archive file paths are given below for particular files " "you need for booting, look for those files in the same directories and " "subdirectories on your CD." msgstr "" #. Tag: para #: install-methods.xml:61 #, no-c-format msgid "" "Once the installer is booted, it will be able to obtain all the other files " "it needs from the CD." msgstr "" #. Tag: para #: install-methods.xml:66 #, no-c-format msgid "" "If you don't have a CD set, then you will need to download the installer " "system files and place them on the VM minidisk floppy disk or " "hard disk or usb stick or a " "connected computer so they can be used to boot the installer." msgstr "" #. Tag: title #: install-methods.xml:92 #, no-c-format msgid "Downloading Files from &debian; Mirrors" msgstr "" #. Tag: para #: install-methods.xml:94 #, no-c-format msgid "" "To find the nearest (and thus probably the fastest) mirror, see the list of &debian; mirrors." msgstr "" #. Tag: para #: install-methods.xml:99 #, no-c-format msgid "" "When downloading files from a &debian; mirror using FTP, be sure to download " "the files in binary mode, not text or automatic mode." msgstr "" #. Tag: title #: install-methods.xml:107 #, no-c-format msgid "Where to Find Installation Images" msgstr "" #. Tag: para #: install-methods.xml:109 #, no-c-format msgid "" "The installation images are located on each &debian; mirror in the directory " "debian/dists/&releasename;/main/" "installer-&architecture;/current/images/ — the MANIFEST lists each image " "and its purpose." msgstr "" #. Tag: title #: install-methods.xml:121 #, no-c-format msgid "Kurobox Pro Installation Files" msgstr "" #. Tag: para #: install-methods.xml:122 #, no-c-format msgid "" "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the " "disk on which you intend to install &debian;. These images can be obtained " "from &kuroboxpro-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:132 #, no-c-format msgid "HP mv2120 Installation Files" msgstr "" #. Tag: para #: install-methods.xml:133 #, no-c-format msgid "" "A firmware image is provided for the HP mv2120 which will automatically boot " "debian-installer. This image can be installed with " "uphpmvault on Linux and other systems and with the HP Media Vault Firmware " "Recovery Utility on Windows. The firmware image can be obtained from &mv2120-" "firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:145 #, no-c-format msgid "QNAP Turbo Station Installation Files" msgstr "" #. Tag: para #: install-methods.xml:146 #, no-c-format msgid "" "The installation files for the QNAP Turbo Station consist of a kernel and " "ramdisk as well as a script to write these images to flash. You can obtain " "the installation files for QNAP TS-109, TS-209, TS-409 and TS-409U models " "from &qnap-orion-firmware-img;. The installation files for QNAP TS-11x/" "TS-12x, HS-210, TS-21x/TS-22x and TS-41x/TS-41x models can be found at &qnap-" "kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:159 #, no-c-format msgid "Plug Computer and OpenRD Installation Files" msgstr "" #. Tag: para #: install-methods.xml:160 #, no-c-format msgid "" "The installation files for plug computers (SheevaPlug, GuruPlug, DreamPlug " "etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can " "obtain these files from &kirkwood-marvell-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:170 #, no-c-format msgid "LaCie NASes Installation Files" msgstr "" #. Tag: para #: install-methods.xml:171 #, no-c-format msgid "" "The installation files for LaCie NASes (Network Space v2, Network Space Max " "v2, Internet Space v2, d2 Network v2, 2Big Network v2 and 5Big Network v2) " "consist of a kernel and initrd for U-Boot. You can obtain these files from " "&lacie-kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:182 #, no-c-format msgid "Armhf Multiplatform Installation Files" msgstr "" #. Tag: para #: install-methods.xml:183 #, no-c-format msgid "" "The installation files for systems supported by the armhf multiplatform " "kernel (see ) consist of " "a standard Linux kernel image, a standard Linux initial ramdisk image and a " "system-specific device-tree blob. The kernel and the initial ramdisk image " "for tftp-booting can be obtained from &armmp-firmware-img; and the device-" "tree blob can be obtained from &armmp-dtb-img;. The tar archive for creating " "a bootable USB stick with the installer can be obtained from &armmp-hd-media-" "tarball;." msgstr "" #. Tag: para #: install-methods.xml:195 #, no-c-format msgid "" "U-boot images for various armhf platforms are available at &armmp-uboot-img;." msgstr "" #. Tag: title #: install-methods.xml:241 #, no-c-format msgid "Creating Floppies from Disk Images" msgstr "" #. Tag: para #: install-methods.xml:242 #, no-c-format msgid "" "Bootable floppy disks are generally used as a last resort to boot the " "installer on hardware that cannot boot from CD or by other means." msgstr "" #. Tag: para #: install-methods.xml:247 #, no-c-format msgid "" "Booting the installer from floppy disk reportedly fails on Mac USB floppy " "drives." msgstr "" #. Tag: para #: install-methods.xml:252 #, no-c-format msgid "" "Disk images are files containing the complete contents of a floppy disk in " "raw form. Disk images, such as boot.img, cannot simply be copied to floppy drives. A special program is " "used to write the image files to floppy disk in raw " "mode. This is required because these images are raw representations of the " "disk; it is required to do a sector copy of the data " "from the file onto the floppy." msgstr "" #. Tag: para #: install-methods.xml:263 #, no-c-format msgid "" "There are different techniques for creating floppies from disk images. This " "section describes how to create floppies from disk images on different " "platforms." msgstr "" #. Tag: para #: install-methods.xml:269 #, no-c-format msgid "" "Before you can create the floppies, you will first need to download them " "from one of the &debian; mirrors, as explained in . If you already have an " "installation CD-ROM or DVD, the floppy images may also be included on the CD/" "DVD." msgstr "" #. Tag: para #: install-methods.xml:277 #, no-c-format msgid "" "No matter which method you use to create your floppies, you should remember " "to flip the write-protect tab on the floppies once you have written them, to " "ensure they are not damaged unintentionally." msgstr "" #. Tag: title #: install-methods.xml:285 #, no-c-format msgid "Writing Disk Images From a Linux or Unix System" msgstr "" #. Tag: para #: install-methods.xml:286 #, no-c-format msgid "" "To write the floppy disk image files to the floppy disks, you will probably " "need root access to the system. Place a good, blank floppy in the floppy " "drive. Next, use the command \n" "$ dd if=filename of=/dev/fd0 bs=1024 conv=sync ; " "sync\n" " where filename is one " "of the floppy disk image files. /dev/fd0 is a commonly " "used name of the floppy disk device, it may be different on your " "workstation (on Solaris, it is /dev/fd/0). The command may return to the prompt before Unix has " "finished writing the floppy disk, so look for the disk-in-use light on the " "floppy drive and be sure that the light is out and the disk has stopped " "revolving before you remove it from the drive. On some systems, you'll have " "to run a command to eject the floppy from the drive " "(on Solaris, use eject, see the manual page)." msgstr "" #. Tag: para #: install-methods.xml:307 #, no-c-format msgid "" "Some systems attempt to automatically mount a floppy disk when you place it " "in the drive. You might have to disable this feature before the workstation " "will allow you to write a floppy in raw mode. " "Unfortunately, how to accomplish this will vary based on your operating " "system. On Solaris, you can work around volume " "management to get raw access to the floppy. First, make sure that the floppy " "is auto-mounted (using volcheck or the equivalent command " "in the file manager). Then use a dd command of the form " "given above, just replace /dev/fd0 with /vol/" "rdsk/floppy_name, where " "floppy_name is the name the floppy disk was given " "when it was formatted (unnamed floppies default to the name " "unnamed_floppy). On other systems, ask your system " "administrator. " msgstr "" #. Tag: para #: install-methods.xml:328 #, no-c-format msgid "" "If writing a floppy on powerpc Linux, you will need to eject it. The " "eject program handles this nicely; you might need to " "install it." msgstr "" #. Tag: title #: install-methods.xml:346 #, no-c-format msgid "Writing Disk Images From DOS, Windows, or OS/2" msgstr "" #. Tag: para #: install-methods.xml:348 #, no-c-format msgid "" "If you have access to an i386 or amd64 machine, you can use one of the " "following programs to copy images to floppies." msgstr "" #. Tag: para #: install-methods.xml:353 #, no-c-format msgid "" "The rawrite1 and rawrite2 programs can " "be used under MS-DOS. To use these programs, first make sure that you are " "booted into DOS. Trying to use these programs from within a DOS box in " "Windows, or double-clicking on these programs from the Windows Explorer is " "not expected to work." msgstr "" #. Tag: para #: install-methods.xml:361 #, no-c-format msgid "" "The rwwrtwin program runs on Windows 95, NT, 98, 2000, " "ME, XP and probably later versions. To use it you will need to unpack diskio." "dll in the same directory." msgstr "" #. Tag: para #: install-methods.xml:367 #, no-c-format msgid "" "These tools can be found on the Official &debian; CD-ROMs under the " "/tools directory." msgstr "" #. Tag: title #: install-methods.xml:380 #, no-c-format msgid "Writing Disk Images From MacOS" msgstr "" #. Tag: para #: install-methods.xml:381 #, no-c-format msgid "" "An AppleScript, Make &debian; Floppy, is " "available for burning floppies from the provided disk image files. It can be " "downloaded from . To use it, just unstuff it on " "your desktop, and then drag any floppy image file to it. You must have " "Applescript installed and enabled in your extensions manager. Disk Copy will " "ask you to confirm that you wish to erase the floppy and proceed to write " "the file image to it." msgstr "" #. Tag: para #: install-methods.xml:392 #, no-c-format msgid "" "You can also use the MacOS utility Disk Copy directly, or " "the freeware utility suntar. The root.bin file is an example of a floppy image. Use one of the following " "methods to create a floppy from the floppy image with these utilities." msgstr "" #. Tag: title #: install-methods.xml:403 #, no-c-format msgid "Writing Disk Images with Disk Copy" msgstr "" #. Tag: para #: install-methods.xml:404 #, no-c-format msgid "" "If you are creating the floppy image from files which were originally on the " "official &debian-gnu; CD, then the Type and Creator are already set " "correctly. The following Creator-Changer steps are only " "necessary if you downloaded the image files from a &debian; mirror." msgstr "" #. Tag: para #: install-methods.xml:413 #, no-c-format msgid "" "Obtain Creator-Changer " "and use it to open the root.bin file." msgstr "" #. Tag: para #: install-methods.xml:420 #, no-c-format msgid "" "Change the Creator to ddsk (Disk Copy), and the Type " "to DDim (binary floppy image). The case is sensitive " "for these fields." msgstr "" #. Tag: para #: install-methods.xml:427 #, no-c-format msgid "" "Important: In the Finder, use Get Info to display the Finder information about the floppy image, and " "X the File Locked check box so that " "MacOS will be unable to remove the boot blocks if the image is accidentally " "mounted." msgstr "" #. Tag: para #: install-methods.xml:436 #, no-c-format msgid "" "Obtain Disk Copy; if you have a MacOS system or CD it " "will very likely be there already, otherwise try ." msgstr "" #. Tag: para #: install-methods.xml:443 #, no-c-format msgid "" "Run Disk Copy, and select " "Utilities Make a Floppy , then select the locked image file from the " "resulting dialog. It will ask you to insert a floppy, then ask if you really " "want to erase it. When done it should eject the floppy." msgstr "" #. Tag: title #: install-methods.xml:458 #, no-c-format msgid "Writing Disk Images with suntar" msgstr "" #. Tag: para #: install-methods.xml:462 #, no-c-format msgid "" "Obtain suntar from . Start the suntar program and select " "Overwrite Sectors... from the Special " "menu." msgstr "" #. Tag: para #: install-methods.xml:470 #, no-c-format msgid "" "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)." msgstr "" #. Tag: para #: install-methods.xml:476 #, no-c-format msgid "" "Select the root.bin file in the file-opening dialog." msgstr "" #. Tag: para #: install-methods.xml:481 #, no-c-format msgid "" "After the floppy has been created successfully, select " "File Eject . If " "there are any errors writing the floppy, simply toss that floppy and try " "another." msgstr "" #. Tag: para #: install-methods.xml:489 #, no-c-format msgid "" "Before using the floppy you created, set the write protect tab! Otherwise if you accidentally mount it in MacOS, MacOS will " "helpfully ruin it." msgstr "" #. Tag: title #: install-methods.xml:508 #, no-c-format msgid "Preparing Files for USB Memory Stick Booting" msgstr "" #. Tag: para #: install-methods.xml:510 #, no-c-format msgid "" "To prepare the USB stick, you will need a system where GNU/Linux is already " "running and where USB is supported. With current GNU/Linux systems the USB " "stick should be automatically recognized when you insert it. If it is not " "you should check that the usb-storage kernel module is loaded. When the USB " "stick is inserted, it will be mapped to a device named /dev/sdX, where the X is a letter in the range a-z. You " "should be able to see to which device the USB stick was mapped by running " "the command dmesg after inserting it. To write to your " "stick, you may have to turn off its write protection switch." msgstr "" #. Tag: para #: install-methods.xml:523 #, no-c-format msgid "" "The procedures described in this section will destroy anything already on " "the device! Make very sure that you use the correct device name for your USB " "stick. If you use the wrong device the result could be that all information " "on for example a hard disk could be lost." msgstr "" #. Tag: title #: install-methods.xml:533 #, no-c-format msgid "Preparing a USB stick using a hybrid CD or DVD image" msgstr "" #. Tag: para #: install-methods.xml:534 #, no-c-format msgid "" "Debian CD and DVD images can now be written directly to a USB stick, which " "is a very easy way to make a bootable USB stick. Simply choose a CD or DVD " "image (such as the netinst, CD-1, DVD-1, or netboot) that will fit on your " "USB stick. See to get a CD or DVD image." msgstr "" #. Tag: para #: install-methods.xml:542 #, no-c-format msgid "" "Alternatively, for very small USB sticks, only a few megabytes in size, you " "can download the mini.iso image from the " "netboot directory (at the location mentioned in )." msgstr "" #. Tag: para #: install-methods.xml:549 #, no-c-format msgid "" "The CD or DVD image you choose should be written directly to the USB stick, " "overwriting its current contents. For example, when using an existing GNU/" "Linux system, the CD or DVD image file can be written to a USB stick as " "follows, after having made sure that the stick is unmounted: " "\n" "# cp debian.iso /dev/" "sdX\n" "# sync\n" " The win32diskimager utility can be used under other " "operating systems to copy the image." msgstr "" #. Tag: para #: install-methods.xml:563 #, no-c-format msgid "" "The image must be written to the whole-disk device and not a partition, e." "g. /dev/sdb and not /dev/sdb1. Do not use tools like unetbootin which alter the image." msgstr "" #. Tag: para #: install-methods.xml:569 #, no-c-format msgid "" "Simply writing the CD or DVD image to USB like this should work fine for " "most users. The other options below are more complex, mainly for people with " "specialised needs." msgstr "" #. Tag: para #: install-methods.xml:577 #, no-c-format msgid "" "The hybrid image on the stick does not occupy all the storage space, so it " "may be worth considering using the free space to hold firmware files or " "packages or any other files of your choice. This could be useful if you have " "only one stick or just want to keep everything you need on one device." msgstr "" #. Tag: para #: install-methods.xml:585 #, no-c-format msgid "" "Create a second, FAT partition on the stick, mount the partition and copy or " "unpack the firmware onto it. For example:" msgstr "" #. Tag: screen #: install-methods.xml:590 #, no-c-format msgid "" "# mount /dev/sdX2 /mnt\n" "# cd /mnt\n" "# tar zxvf /path/to/firmware.tar.gz\n" "# cd /\n" "# umount /mnt" msgstr "" #. Tag: para #: install-methods.xml:592 #, no-c-format msgid "" "You might have written the mini.iso to the USB stick. " "In this case the second partition doesn't have to be created as, very " "nicely, it will already be present. Unplugging and replugging the USB stick " "should make the two partitions visible." msgstr "" #. Tag: title #: install-methods.xml:606 #, no-c-format msgid "Manually copying files to the USB stick" msgstr "" #. Tag: para #: install-methods.xml:607 #, no-c-format msgid "" "An alternative way to set up your USB stick is to manually copy the " "installer files, and also a CD image to it. Note that the USB stick should " "be at least 1 GB in size (smaller setups are possible if you follow )." msgstr "" #. Tag: para #: install-methods.xml:614 #, no-c-format msgid "" "There is an all-in-one file hd-media/boot.img.gz which " "contains all the installer files (including the kernel) as well as syslinux and its configuration " "file as well as yaboot and its configuration file." msgstr "" #. Tag: para #: install-methods.xml:623 #, no-c-format msgid "" "Note that, although convenient, this method does have one major " "disadvantage: the logical size of the device will be limited to 1 GB, even " "if the capacity of the USB stick is larger. You will need to repartition the " "USB stick and create new file systems to get its full capacity back if you " "ever want to use it for some different purpose." msgstr "" #. Tag: para #: install-methods.xml:631 #, no-c-format msgid "To use this image simply extract it directly to your USB stick:" msgstr "" #. Tag: screen #: install-methods.xml:635 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX" msgstr "" #. Tag: para #: install-methods.xml:637 #, no-c-format msgid "" "Create a partition of type \"Apple_Bootstrap\" on your USB stick using " "mac-fdisk's C command and extract " "the image directly to that:" msgstr "" #. Tag: screen #: install-methods.xml:643 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX2" msgstr "" #. Tag: para #: install-methods.xml:645 #, no-c-format msgid "" "After that, mount the USB memory stick (mount /dev/sdX /mnt), (mount /dev/" "sdX2 /mnt), which will now " "have a FAT filesystem an HFS filesystem on it, and copy a &debian; ISO image (netinst " "or full CD) to it. Unmount the stick (umount /mnt) " "and you are done." msgstr "" #. Tag: title #: install-methods.xml:662 #, no-c-format msgid "Manually copying files to the USB stick — the flexible way" msgstr "" #. Tag: para #: install-methods.xml:663 #, no-c-format msgid "" "If you like more flexibility or just want to know what's going on, you " "should use the following method to put the files on your stick. One " "advantage of using this method is that — if the capacity of your USB " "stick is large enough — you have the option of copying any ISO image, " "even a DVD image, to it." msgstr "" #. Tag: title #: install-methods.xml:678 install-methods.xml:800 #, no-c-format msgid "Partitioning the USB stick" msgstr "" #. Tag: para #: install-methods.xml:679 #, no-c-format msgid "" "We will show how to set up the memory stick to use the first partition, " "instead of the entire device." msgstr "" #. Tag: para #: install-methods.xml:684 #, no-c-format msgid "" "Since most USB sticks come pre-configured with a single FAT16 partition, you " "probably won't have to repartition or reformat the stick. If you have to do " "that anyway, use cfdisk or any other partitioning tool to " "create a FAT16 partition Don't forget to set the " "bootable bootable flag. , install an MBR " "using: \n" "# install-mbr /dev/sdX\n" " The install-mbr command is " "contained in the mbr &debian; package. Then create " "the filesystem using: \n" "# mkdosfs /dev/sdX1\n" " Take care that you use the correct device name " "for your USB stick. The mkdosfs command is contained in " "the dosfstools &debian; package." msgstr "" #. Tag: para #: install-methods.xml:708 #, no-c-format msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. Although any boot loader (e.g. lilo) should work, it's convenient to use syslinux, since it uses a FAT16 partition and can be reconfigured by just " "editing a text file. Any operating system which supports the FAT file system " "can be used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:718 #, no-c-format msgid "" "To put syslinux on the FAT16 partition on your USB " "stick, install the syslinux and mtools packages on your system, and do: \n" "# syslinux /dev/sdX1\n" " Again, take care that you use the correct device " "name. The partition must not be mounted when starting syslinux. This procedure writes a boot sector to the partition and creates " "the file ldlinux.sys which contains the boot loader " "code." msgstr "" #. Tag: title #: install-methods.xml:735 install-methods.xml:847 #, no-c-format msgid "Adding the installer image" msgstr "" #. Tag: para #: install-methods.xml:736 #, no-c-format msgid "" "Mount the partition (mount /dev/sdX1 /" "mnt) and copy the following installer image files to the stick: " " vmlinuz or " "linux (kernel binary) " " initrd.gz (initial ramdisk image) You can choose between either the text-" "based or the graphical version of the installer. The latter can be found in " "the gtk subdirectory. If you want to rename the files, " "please note that syslinux can only process DOS (8.3) " "file names." msgstr "" #. Tag: para #: install-methods.xml:760 #, no-c-format msgid "" "Next you should create a syslinux.cfg configuration " "file, which at a bare minimum should contain the following line (change the " "name of the kernel binary to linux if " "you used a netboot image): \n" "default vmlinuz initrd=initrd.gz\n" " For the graphical installer you should add " "vga=788 to the line. Other parameters can be appended " "as desired." msgstr "" #. Tag: para #: install-methods.xml:772 #, no-c-format msgid "" "To enable the boot prompt to permit further parameter appending, add a " "prompt 1 line." msgstr "" #. Tag: para #: install-methods.xml:777 install-methods.xml:887 #, no-c-format msgid "" "If you used an hd-media image, you should now copy the " "ISO file of a &debian; ISO image You can use either a " "netinst or a full CD image (see ). Be sure " "to select one that fits. Note that the netboot mini.iso image is not usable for this purpose. " "onto the stick. When you are done, unmount the USB memory stick " "(umount /mnt)." msgstr "" #. Tag: para #: install-methods.xml:801 #, no-c-format msgid "" "Most USB sticks do not come pre-configured in such a way that Open Firmware " "can boot from them, so you will need to repartition the stick. On Mac " "systems, run mac-fdisk /dev/sdX, initialise a new partition map using the i command, and create a new partition of type Apple_Bootstrap using " "the C command. (Note that the first \"partition\" " "will always be the partition map itself.) Then type " "\n" "$ hformat /dev/sdX2\n" " Take care that you use the correct device name " "for your USB stick. The hformat command is contained in " "the hfsutils &debian; package." msgstr "" #. Tag: para #: install-methods.xml:818 #, no-c-format msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. The yaboot boot loader can be " "installed on an HFS filesystem and can be reconfigured by just editing a " "text file. Any operating system which supports the HFS file system can be " "used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:827 #, no-c-format msgid "" "The normal ybin tool that comes with yaboot does not yet understand USB storage devices, so you will have to " "install yaboot by hand using the hfsutils tools. Type \n" "$ hmount /dev/sdX2\n" "$ hcopy -r /usr/lib/yaboot/yaboot :\n" "$ hattrib -c UNIX -t tbxi :yaboot\n" "$ hattrib -b :\n" "$ humount\n" " Again, take care that you use the correct device " "name. The partition must not be otherwise mounted during this procedure. " "This procedure writes the boot loader to the partition, and uses the HFS " "utilities to mark it in such a way that Open Firmware will boot it. Having " "done this, the rest of the USB stick may be prepared using the normal Unix " "utilities." msgstr "" #. Tag: para #: install-methods.xml:848 #, no-c-format msgid "" "Mount the partition (mount /dev/sdX2 /" "mnt) and copy the following installer image files to the stick:" msgstr "" #. Tag: para #: install-methods.xml:855 #, no-c-format msgid "vmlinux (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:860 #, no-c-format msgid "initrd.gz (initial ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:865 #, no-c-format msgid "yaboot.conf (yaboot configuration file)" msgstr "" #. Tag: para #: install-methods.xml:870 #, no-c-format msgid "boot.msg (optional boot message)" msgstr "" #. Tag: para #: install-methods.xml:877 #, no-c-format msgid "" "The yaboot.conf configuration file should contain the " "following lines: \n" "default=install\n" "root=/dev/ram\n" "\n" "message=/boot.msg\n" "\n" "image=/vmlinux\n" " label=install\n" " initrd=/initrd.gz\n" " initrd-size=10000\n" " read-only\n" " Please note that the initrd-size parameter may need to be increased, depending on the image you " "are booting." msgstr "" #. Tag: title #: install-methods.xml:915 #, no-c-format msgid "Preparing Files for Hard Disk Booting" msgstr "" #. Tag: para #: install-methods.xml:916 #, no-c-format msgid "" "The installer may be booted using boot files placed on an existing hard " "drive partition, either launched from another operating system or by " "invoking a boot loader directly from the BIOS." msgstr "" #. Tag: para #: install-methods.xml:922 #, no-c-format msgid "" "A full, pure network installation can be achieved using this " "technique. This avoids all hassles of removable media, like finding and " "burning CD images or struggling with too numerous and unreliable floppy " "disks." msgstr "" #. Tag: para #: install-methods.xml:929 #, no-c-format msgid "" "The installer cannot boot from files on an HFS+ file system. MacOS System " "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To " "determine whether your existing file system is HFS+, select Get " "Info for the volume in question. HFS file systems appear as " "Mac OS Standard, while HFS+ file systems say " "Mac OS Extended. You must have an HFS partition in " "order to exchange files between MacOS and Linux, in particular the " "installation files you download." msgstr "" #. Tag: para #: install-methods.xml:940 #, no-c-format msgid "" "Different programs are used for hard disk installation system booting, " "depending on whether the system is a NewWorld or an " "OldWorld model." msgstr "" #. Tag: title #: install-methods.xml:949 #, no-c-format msgid "" "Hard disk installer booting from Linux using LILO or " "GRUB" msgstr "" #. Tag: para #: install-methods.xml:951 #, no-c-format msgid "" "This section explains how to add to or even replace an existing linux " "installation using either LILO or GRUB." msgstr "" #. Tag: para #: install-methods.xml:957 #, no-c-format msgid "" "At boot time, both bootloaders support loading in memory not only the " "kernel, but also a disk image. This RAM disk can be used as the root file-" "system by the kernel." msgstr "" #. Tag: para #: install-methods.xml:963 #, no-c-format msgid "" "Copy the following files from the &debian; archives to a convenient location " "on your hard drive (note that LILO can not boot from files on an NTFS file " "system), for instance to /boot/newinstall/." msgstr "" #. Tag: para #: install-methods.xml:971 #, no-c-format msgid "vmlinuz (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:976 #, no-c-format msgid "initrd.gz (ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:983 #, no-c-format msgid "" "Finally, to configure the bootloader proceed to ." msgstr "" #. Tag: title #: install-methods.xml:993 #, no-c-format msgid "Hard disk installer booting from DOS using loadlin" msgstr "" #. Tag: para #: install-methods.xml:994 #, no-c-format msgid "" "This section explains how to prepare your hard drive for booting the " "installer from DOS using loadlin." msgstr "" #. Tag: para #: install-methods.xml:999 #, no-c-format msgid "" "Copy the following directories from a &debian; CD image to c:\\." msgstr "" #. Tag: para #: install-methods.xml:1004 #, no-c-format msgid "" "/&x86-install-dir; (kernel binary and ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:1009 #, no-c-format msgid "/tools (loadlin tool)" msgstr "" #. Tag: title #: install-methods.xml:1022 #, no-c-format msgid "Hard Disk Installer Booting for OldWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1023 #, no-c-format msgid "" "The boot-floppy-hfs floppy uses miBoot to launch Linux installation, but miBoot cannot easily be used for hard disk booting. " "BootX, launched from MacOS, supports booting from " "files placed on the hard disk. BootX can also be " "used to dual-boot MacOS and Linux after your &debian; installation is " "complete. For the Performa 6360, it appears that quik " "cannot make the hard disk bootable. So BootX is " "required on that model." msgstr "" #. Tag: para #: install-methods.xml:1036 #, no-c-format msgid "" "Download and unstuff the BootX distribution, " "available from , or in the " "dists/woody/main/disks-powerpc/current/powermac " "directory on &debian; http/ftp mirrors and official &debian; CDs. Use " "Stuffit Expander to extract it from its archive. " "Within the package, there is an empty folder called Linux Kernels. Download linux.bin and ramdisk." "image.gz from the disks-powerpc/current/powermac folder, and place them in the Linux Kernels " "folder. Then place the Linux Kernels folder in the " "active System Folder." msgstr "" #. Tag: title #: install-methods.xml:1056 #, no-c-format msgid "Hard Disk Installer Booting for NewWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1057 #, no-c-format msgid "" "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as " "well as loading ELF binaries directly from the hard disk. These machines " "will boot Linux directly via yaboot, which supports " "loading a kernel and RAMdisk directly from an ext2 partition, as well as " "dual-booting with MacOS. Hard disk booting of the installer is particularly " "appropriate for newer machines without floppy drives. BootX is not supported and must not be used on NewWorld PowerMacs." msgstr "" #. Tag: para #: install-methods.xml:1068 #, no-c-format msgid "" "Copy (not move) the following four files which you " "downloaded earlier from the &debian; archives, onto the root level of your " "hard drive (this can be accomplished by option-dragging " "each file to the hard drive icon)." msgstr "" #. Tag: filename #: install-methods.xml:1078 install-methods.xml:1404 #, no-c-format msgid "vmlinux" msgstr "" #. Tag: filename #: install-methods.xml:1083 install-methods.xml:1409 #, no-c-format msgid "initrd.gz" msgstr "" #. Tag: filename #: install-methods.xml:1088 install-methods.xml:1414 #, no-c-format msgid "yaboot" msgstr "" #. Tag: filename #: install-methods.xml:1093 install-methods.xml:1419 #, no-c-format msgid "yaboot.conf" msgstr "" #. Tag: para #: install-methods.xml:1098 #, no-c-format msgid "" "Make a note of the partition number of the MacOS partition where you place " "these files. If you have the MacOS pdisk program, you can " "use the L command to check for the partition number. You " "will need this partition number for the command you type at the Open " "Firmware prompt when you boot the installer." msgstr "" #. Tag: para #: install-methods.xml:1106 #, no-c-format msgid "To boot the installer, proceed to ." msgstr "" #. Tag: title #: install-methods.xml:1119 #, no-c-format msgid "Preparing Files for TFTP Net Booting" msgstr "" #. Tag: para #: install-methods.xml:1120 #, no-c-format msgid "" "If your machine is connected to a local area network, you may be able to " "boot it over the network from another machine, using TFTP. If you intend to " "boot the installation system from another machine, the boot files will need " "to be placed in specific locations on that machine, and the machine " "configured to support booting of your specific machine." msgstr "" #. Tag: para #: install-methods.xml:1128 #, no-c-format msgid "" "You need to set up a TFTP server, and for many machines a DHCP server, or RARP server, or BOOTP server." msgstr "" #. Tag: para #: install-methods.xml:1135 #, no-c-format msgid "" "The Reverse Address Resolution Protocol " "(RARP) is one way to tell your client what IP address to use for itself. " "Another way is to use the BOOTP protocol. BOOTP is an IP protocol that informs a computer of its IP " "address and where on the network to obtain a boot image. The DHCP " "(Dynamic Host Configuration Protocol) is a more flexible, backwards-" "compatible extension of BOOTP. Some systems can only be configured via DHCP." msgstr "" #. Tag: para #: install-methods.xml:1149 #, no-c-format msgid "" "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good " "idea to use DHCP instead of BOOTP. Some of the latest machines are unable to " "boot using BOOTP." msgstr "" #. Tag: para #: install-methods.xml:1155 #, no-c-format msgid "" "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There " "is an rbootd package available in &debian;." msgstr "" #. Tag: para #: install-methods.xml:1160 #, no-c-format msgid "" "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to " "the client. Theoretically, any server, on any platform, which implements " "these protocols, may be used. In the examples in this section, we shall " "provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux." msgstr "" #. Tag: para #: install-methods.xml:1168 #, no-c-format msgid "" "For a &debian-gnu; server we recommend tftpd-hpa. " "It's written by the same author as the syslinux " "bootloader and is therefore least likely to cause issues. A good alternative " "is atftpd." msgstr "" #. Tag: title #: install-methods.xml:1184 #, no-c-format msgid "Setting up RARP server" msgstr "" #. Tag: para #: install-methods.xml:1185 #, no-c-format msgid "" "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " "address) of the client computers to be installed. If you don't know this " "information, you can pick it off the initial " "OpenPROM boot messages, use the OpenBoot .enet-addr " "command, or boot into Rescue mode (e.g., from the " "rescue floppy) and use the command ip addr show dev eth0." msgstr "" #. Tag: para #: install-methods.xml:1197 #, no-c-format msgid "" "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the " "rarpd program. You need to ensure that the Ethernet " "hardware address for the client is listed in the ethers " "database (either in the /etc/ethers file, or via NIS/NIS" "+) and in the hosts database. Then you need to start the RARP " "daemon. Issue the command (as root): /usr/sbin/rarpd -a on most Linux systems and SunOS 5 (Solaris 2), /usr/" "sbin/in.rarpd -a on some other Linux systems, or /usr/" "etc/rarpd -a in SunOS 4 (Solaris 1)." msgstr "" #. Tag: title #: install-methods.xml:1218 #, no-c-format msgid "Setting up a DHCP server" msgstr "" #. Tag: para #: install-methods.xml:1219 #, no-c-format msgid "" "One free software DHCP server is ISC dhcpd. For &debian-" "gnu;, the isc-dhcp-server package is recommended. " "Here is a sample configuration file for it (see /etc/dhcp/dhcpd." "conf):" msgstr "" #. Tag: screen #: install-methods.xml:1226 #, no-c-format msgid "" "option domain-name \"example.com\";\n" "option domain-name-servers ns1.example.com;\n" "option subnet-mask 255.255.255.0;\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "server-name \"servername\";\n" "\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option routers 192.168.1.1;\n" "}\n" "\n" "host clientname {\n" " filename \"/tftpboot.img\";\n" " server-name \"servername\";\n" " next-server servername;\n" " hardware ethernet 01:23:45:67:89:AB;\n" " fixed-address 192.168.1.90;\n" "}" msgstr "" #. Tag: para #: install-methods.xml:1228 #, no-c-format msgid "" "In this example, there is one server servername " "which performs all of the work of DHCP server, TFTP server, and network " "gateway. You will almost certainly need to change the domain-name options, " "as well as the server name and client hardware address. The " "filename option should be the name of the file " "which will be retrieved via TFTP." msgstr "" #. Tag: para #: install-methods.xml:1238 #, no-c-format msgid "" "After you have edited the dhcpd configuration file, " "restart it with /etc/init.d/isc-dhcp-server restart." msgstr "" #. Tag: title #: install-methods.xml:1246 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "" #. Tag: para #: install-methods.xml:1247 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-" "boot Execution Environment (PXE) method of TFTP. \n" "option domain-name \"example.com\";\n" "\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "\n" "allow booting;\n" "allow bootp;\n" "\n" "# The next paragraph needs to be modified to fit your case\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option broadcast-address 192.168.1.255;\n" "# the gateway address which can be different\n" "# (access to the internet for instance)\n" " option routers 192.168.1.1;\n" "# indicate the dns you want to use\n" " option domain-name-servers 192.168.1.3;\n" "}\n" "\n" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"pxelinux.0\";\n" " }\n" "}\n" " Note that for PXE booting, the client filename " "pxelinux.0 is a boot loader, not a kernel image (see " " below)." msgstr "" #. Tag: title #: install-methods.xml:1267 #, no-c-format msgid "Setting up a BOOTP server" msgstr "" #. Tag: para #: install-methods.xml:1268 #, no-c-format msgid "" "There are two BOOTP servers available for GNU/Linux. The first is CMU " "bootpd. The other is actually a DHCP server: ISC " "dhcpd. In &debian-gnu; these are contained in the " "bootp and isc-dhcp-server " "packages respectively." msgstr "" #. Tag: para #: install-methods.xml:1276 #, no-c-format msgid "" "To use CMU bootpd, you must first uncomment (or add) the " "relevant line in /etc/inetd.conf. On &debian-gnu;, you " "can run update-inetd --enable bootps, then " "/etc/init.d/inetd reload to do so. Just in case your " "BOOTP server does not run &debian;, the line in question should look like: " "\n" "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" " Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " "good old BSD printcap, termcap, " "and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " "Here is an example /etc/bootptab: " "\n" "client:\\\n" " hd=/tftpboot:\\\n" " bf=tftpboot.img:\\\n" " ip=192.168.1.90:\\\n" " sm=255.255.255.0:\\\n" " sa=192.168.1.1:\\\n" " ha=0123456789AB:\n" " You will need to change at least the ha option, which specifies the hardware address of the client. The " "bf option specifies the file a client should retrieve via " "TFTP; see for more details. On SGI machines you can just enter the command monitor and type " "printenv. The value of the eaddr variable is the machine's MAC address. " msgstr "" #. Tag: para #: install-methods.xml:1309 #, no-c-format msgid "" "By contrast, setting up BOOTP with ISC dhcpd is really " "easy, because it treats BOOTP clients as a moderately special case of DHCP " "clients. Some architectures require a complex configuration for booting " "clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " "adding the allow bootp directive to the configuration " "block for the subnet containing the client in /etc/dhcp/dhcpd." "conf, and restart dhcpd with /etc/" "init.d/isc-dhcp-server restart." msgstr "" #. Tag: title #: install-methods.xml:1328 #, no-c-format msgid "Enabling the TFTP Server" msgstr "" #. Tag: para #: install-methods.xml:1329 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that " "tftpd is enabled." msgstr "" #. Tag: para #: install-methods.xml:1334 #, no-c-format msgid "" "In the case of tftpd-hpa there are two ways the " "service can be run. It can be started on demand by the system's " "inetd daemon, or it can be set up to run as an " "independent daemon. Which of these methods is used is selected when the " "package is installed and can be changed by reconfiguring the package." msgstr "" #. Tag: para #: install-methods.xml:1343 #, no-c-format msgid "" "Historically, TFTP servers used /tftpboot as directory " "to serve images from. However, &debian-gnu; packages may use other " "directories to comply with the Filesystem " "Hierarchy Standard. For example, tftpd-hpa by " "default uses /srv/tftp. You may have to adjust the " "configuration examples in this section accordingly." msgstr "" #. Tag: para #: install-methods.xml:1353 #, no-c-format msgid "" "All in.tftpd alternatives available in &debian; should " "log TFTP requests to the system logs by default. Some of them support a " "-v argument to increase verbosity. It is recommended " "to check these log messages in case of boot problems as they are a good " "starting point for diagnosing the cause of errors." msgstr "" #. Tag: para #: install-methods.xml:1361 #, no-c-format msgid "" "If you intend to install &debian; on an SGI machine and your TFTP server is " "a GNU/Linux box running Linux 2.4, you'll need to set the following on your " "server: \n" "# echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc\n" " to turn off Path MTU discovery, otherwise the " "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets " "are sent from a source port no greater than 32767, or the download will " "stall after the first packet. Again, it's Linux 2.4.X tripping this bug in " "the PROM, and you can avoid it by setting \n" "# echo \"2048 32767\" > /proc/sys/net/ipv4/ip_local_port_range\n" " to adjust the range of source ports the Linux " "TFTP server uses." msgstr "" #. Tag: title #: install-methods.xml:1383 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "" #. Tag: para #: install-methods.xml:1384 #, no-c-format msgid "" "Next, place the TFTP boot image you need, as found in , in the tftpd boot image directory. You may " "have to make a link from that file to the file which tftpd will use for booting a particular client. Unfortunately, the file " "name is determined by the TFTP client, and there are no strong standards." msgstr "" #. Tag: para #: install-methods.xml:1393 #, no-c-format msgid "" "On NewWorld Power Macintosh machines, you will need to set up the " "yaboot boot loader as the TFTP boot image. " "Yaboot will then retrieve the kernel and RAMdisk images " "via TFTP itself. You will need to download the following files from the " "netboot/ directory:" msgstr "" #. Tag: filename #: install-methods.xml:1424 #, no-c-format msgid "boot.msg" msgstr "" #. Tag: para #: install-methods.xml:1429 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass pxelinux.0 to " "tftpd as the filename to boot." msgstr "" #. Tag: para #: install-methods.xml:1437 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass /debian-installer/ia64/" "elilo.efi to tftpd as the filename to boot." msgstr "" #. Tag: title #: install-methods.xml:1449 #, no-c-format msgid "SPARC TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1450 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as " "SUN4M or SUN4C, to the filename. Thus, if your " "system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename " "would be C0A80103.SUN4C. However, there are also " "subarchitectures where the file the client looks for is just " "client-ip-in-hex. An easy way to determine the " "hexadecimal code for the IP address is to enter the following command in a " "shell (assuming the machine's intended IP is 10.0.0.4). " "\n" "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n" " To get to the correct filename, you will need to " "change all letters to uppercase and if necessary append the subarchitecture " "name." msgstr "" #. Tag: para #: install-methods.xml:1466 #, no-c-format msgid "" "If you've done all this correctly, giving the command boot net from the OpenPROM should load the image. If the image cannot be " "found, try checking the logs on your tftp server to see which image name is " "being requested." msgstr "" #. Tag: para #: install-methods.xml:1473 #, no-c-format msgid "" "You can also force some sparc systems to look for a specific file name by " "adding it to the end of the OpenPROM boot command, such as boot " "net my-sparc.image. This must still reside in the directory that " "the TFTP server looks in." msgstr "" #. Tag: title #: install-methods.xml:1484 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1485 #, no-c-format msgid "" "On SGI machines you can rely on the bootpd to supply the " "name of the TFTP file. It is given either as the bf= " "in /etc/bootptab or as the filename= option in /etc/dhcpd.conf." msgstr "" #. Tag: title #: install-methods.xml:1593 #, no-c-format msgid "Automatic Installation" msgstr "" #. Tag: para #: install-methods.xml:1594 #, no-c-format msgid "" "For installing on multiple computers it's possible to do fully automatic " "installations. &debian; packages intended for this include fai-" "quickstart (which can use an install server) and the &debian; " "Installer itself. Have a look at the FAI home page for detailed information." msgstr "" #. Tag: title #: install-methods.xml:1606 #, no-c-format msgid "Automatic Installation Using the &debian; Installer" msgstr "" #. Tag: para #: install-methods.xml:1607 #, no-c-format msgid "" "The &debian; Installer supports automating installs via preconfiguration " "files. A preconfiguration file can be loaded from the network or from " "removable media, and used to fill in answers to questions asked during the " "installation process." msgstr "" #. Tag: para #: install-methods.xml:1614 #, no-c-format msgid "" "Full documentation on preseeding including a working example that you can " "edit is in ." msgstr ""