# SOME DESCRIPTIVE TITLE. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: d-i-manual_boot-installer\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2015-05-04 18:16+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: application/x-xml2pot; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Tag: title #: boot-installer.xml:4 #, no-c-format msgid "Booting the Installation System" msgstr "" #. Tag: title #: boot-installer.xml:9 #, no-c-format msgid "Booting the Installer on &arch-title;" msgstr "" #. Tag: para #: boot-installer.xml:15 #, no-c-format msgid "" "If you have any other operating systems on your system that you wish to keep " "(dual boot setup), you should make sure that they have been properly shut " "down before you boot the installer. Installing an " "operating system while another operating system is in hibernation (has been " "suspended to disk) could result in loss of, or damage to the state of the " "suspended operating system which could cause problems when it is rebooted." msgstr "" #. Tag: para #: boot-installer.xml:26 #, no-c-format msgid "" "For information on how to boot the graphical installer, see ." msgstr "" #. Tag: title #: boot-installer.xml:39 #, no-c-format msgid "Boot image formats" msgstr "" #. Tag: para #: boot-installer.xml:40 #, no-c-format msgid "" "On ARM-based systems in most cases one of two formats for boot images is " "used: a) standard Linux zImage-format kernels (vmlinuz) in " "conjunction with standard Linux initial ramdisks (initrd.gz) " "or b) uImage-format kernels (uImage) in conjunction with " "corresponding initial ramdisks (uInitrd)." msgstr "" #. Tag: para #: boot-installer.xml:48 #, no-c-format msgid "" "uImage/uInitrd are image formats designed for the U-Boot firmware that is " "used on many ARM-based systems (mostly 32-bit ones). Older U-Boot versions " "can only boot files in uImage/uInitrd format, so these are often used on " "older armel systems. Newer U-Boot versions can - besides booting uImages/" "uInitrds - also boot standard Linux kernels and ramdisk images, but the " "command syntax to do that is slightly different from that for booting " "uImages." msgstr "" #. Tag: para #: boot-installer.xml:57 #, no-c-format msgid "" "For systems using a multiplatform kernel, besides kernel and initial ramdisk " "a so-called device-tree file (or device-tree blob, dtb) is " "needed. It is specific to each supported system and contains a description " "of the particular hardware. The dtb should be supplied on the device by the " "firmware, but in practice a newer one often needs to be loaded." msgstr "" #. Tag: title #: boot-installer.xml:68 boot-installer.xml:86 #, no-c-format msgid "Console configuration" msgstr "" #. Tag: para #: boot-installer.xml:69 #, no-c-format msgid "" "The netboot tarball (), and the " "installer SD-card images () use " "the (platform-specific) default console that is defined by U-Boot in the " "console variable. In most cases that is a serial console, so " "on those platforms you by default need a serial console cable to use the " "installer." msgstr "" #. Tag: para #: boot-installer.xml:78 #, no-c-format msgid "" "On platforms which also support a video console, you can modify the U-Boot " "console variable accordingly if you would like the installer " "to start on the video console." msgstr "" #. Tag: para #: boot-installer.xml:87 #, no-c-format msgid "" "The graphical installer is not enabled on the arm64 &d-i; images for jessie " "so the serial console is used. The console device should be detected " "automatically from the firmware, but if it is not then after you boot linux " "from the GRUB menu you will see a 'Booting Linux' message then nothing more." msgstr "" #. Tag: para #: boot-installer.xml:94 #, no-c-format msgid "" "If you hit this issue you will need to set a specific console config on the " "kernel command line. Hit e for 'Edit Kernel command-" "line' at the GRUB menu, and change --- quiet to console=<device>," "<speed> e.g. " "console=ttyAMA0,115200n8 " "When finished hit Control x to continue booting with new setting." msgstr "" #. Tag: title #: boot-installer.xml:108 #, no-c-format msgid "Juno Installation" msgstr "" #. Tag: para #: boot-installer.xml:109 #, no-c-format msgid "" "Juno has UEFI so the install is straightforward. The most practical method " "is installing from USB stick. You need up to date firmware for USB-booting " "to work. Builds from &url-juno-firmware; after March 2015 tested OK. Consult Juno documentation on firmware " "updating." msgstr "" #. Tag: para #: boot-installer.xml:116 #, no-c-format msgid "" "Prepare a standard arm64 CD image on a USB stick. Insert it in one of the " "USB ports on the back. Plug a serial cable into the upper 9-pin serial port " "on the back. If you need networking (netboot image) plug the ethernet cable " "into the socket on the front of the machine." msgstr "" #. Tag: para #: boot-installer.xml:123 #, no-c-format msgid "" "Run a serial console at 115200, 8bit no parity, and boot the Juno. It should " "boot from the USB stick to a GRUB menu. The console config is not correctly " "detected on Juno so just hitting return will show no kernel output. Set the " "console to console=ttyAMA0,115200n8 as described in (). " "Control x to boot " "should show you the &d-i; screens, and allow you to proceed with a standard " "installation." msgstr "" #. Tag: title #: boot-installer.xml:136 #, no-c-format msgid "Applied Micro Mustang Installation" msgstr "" #. Tag: para #: boot-installer.xml:137 #, no-c-format msgid "" "UEFI is available for this machine but it is normally shipped with U-Boot so " "you will need to either install UEFI firmware first then use standard boot/" "install methods, or use U-Boot boot methods. Also USB is not supported in " "the jessie kernel so installing from a USB stick does not work. You must use " "a serial console to control the installation because the graphical installer " "is not enabled on the arm64 architecture." msgstr "" #. Tag: para #: boot-installer.xml:146 #, no-c-format msgid "" "The recommended install method is to copy the &d-i; kernel and initrd onto " "the hard drive, using the openembedded system supplied with the machine, " "then boot from that to run the installer. Alternatively use TFTP to get the " "kernel/dtb/initrd copied over and booted (). After installation, manual changes to boot from the installed image are " "needed." msgstr "" #. Tag: para #: boot-installer.xml:155 #, no-c-format msgid "" "Run a serial console at 115200, 8bit no parity, and boot the machine. Reboot " "the machine and when you see \"Hit any key to stop autoboot:\" hit a key to " "get a Mustang# prompt. Then use U-Boot commands to load and boot the kernel, " "dtb and initrd." msgstr "" #. Tag: title #: boot-installer.xml:164 #, no-c-format msgid "Booting by TFTP" msgstr "" #. Tag: para #: boot-installer.xml:170 boot-installer.xml:832 boot-installer.xml:1467 #: boot-installer.xml:1651 boot-installer.xml:1973 boot-installer.xml:2121 #, no-c-format msgid "" "Booting from the network requires that you have a network connection and a " "TFTP network boot server (and probably also a DHCP, RARP, or BOOTP server " "for automatic network configuration)." msgstr "" #. Tag: para #: boot-installer.xml:176 boot-installer.xml:838 boot-installer.xml:1473 #: boot-installer.xml:1657 boot-installer.xml:1979 boot-installer.xml:2127 #, no-c-format msgid "" "Older systems such as the 715 might require the use of an RBOOT server " "instead of a BOOTP server." msgstr "" #. Tag: para #: boot-installer.xml:181 boot-installer.xml:843 boot-installer.xml:1478 #: boot-installer.xml:1662 boot-installer.xml:1984 boot-installer.xml:2132 #, no-c-format msgid "" "The server-side setup to support network booting is described in ." msgstr "" #. Tag: title #: boot-installer.xml:190 #, no-c-format msgid "TFTP-booting in U-Boot" msgstr "" #. Tag: para #: boot-installer.xml:191 #, no-c-format msgid "" "Network booting on systems using the U-Boot firmware consists of three " "steps: a) configuring the network, b) loading the images (kernel/initial " "ramdisk/dtb) into memory and c) actually executing the previosly loaded code." msgstr "" #. Tag: para #: boot-installer.xml:197 #, no-c-format msgid "" "First you have to configure the network, either automatically via DHCP by " "running \n" "setenv autoload no\n" "dhcp\n" " or manually by setting several environment " "variables \n" "setenv ipaddr <ip address of the client>\n" "setenv netmask <netmask>\n" "setenv serverip <ip address of the tftp server>\n" "setenv dnsip <ip address of the nameserver>\n" "setenv gatewayip <ip address of the default gateway>\n" " If you prefer, you can make these settings " "permanent by running" msgstr "" #. Tag: screen #: boot-installer.xml:204 #, no-c-format msgid "saveenv" msgstr "" #. Tag: para #: boot-installer.xml:206 #, no-c-format msgid "" "Afterwards you need to load the images (kernel/initial ramdisk/dtb) into " "memory. This is done with the tftpboot command, which has to be provided " "with the address at which the image shall be stored in memory. Unfortunately " "the memory map can vary from system to system, so there is no general rule " "which addresses can be used for this." msgstr "" #. Tag: para #: boot-installer.xml:214 #, no-c-format msgid "" "On some systems, U-Boot predefines a set of environment variables with " "suitable load addresses: kernel_addr_r, ramdisk_addr_r and fdt_addr_r. You " "can check whether they are defined by running \n" "printenv kernel_addr_r ramdisk_addr_r fdt_addr_r\n" " If they are not defined, you have to check your " "system's documentation for appropriate values and set them manually. For " "systems based on Allwinner SunXi SOCs (e.g. the Allwinner A10, architecture " "name sun4i or the Allwinner A20, architecture name " "sun7i), you can e.g. use the follwing values:" msgstr "" #. Tag: screen #: boot-installer.xml:225 #, no-c-format msgid "" "setenv kernel_addr_r 0x46000000\n" "setenv fdt_addr_r 0x47000000\n" "setenv ramdisk_addr_r 0x48000000" msgstr "" #. Tag: para #: boot-installer.xml:227 #, no-c-format msgid "" "When the load addresses are defined, you can load the images into memory " "from the previously defined tftp server with" msgstr "" #. Tag: screen #: boot-installer.xml:230 #, no-c-format msgid "" "tftpboot ${kernel_addr_r} <filename of the kernel image>\n" "tftpboot ${fdt_addr_r} <filename of the dtb>\n" "tftpboot ${ramdisk_addr_r} <filename of the initial ramdisk image>" msgstr "" #. Tag: para #: boot-installer.xml:232 #, no-c-format msgid "" "The third part is setting the kernel commandline and actually executing the " "loaded code. U-Boot passes the content of the bootargs " "environment variable as commandline to the kernel, so any parameters for the " "kernel and the installer - such as the console device (see ) or preseeding options (see and ) - can be set with a command " "like \n" "setenv bootargs console=ttyS0,115200 rootwait panic=10\n" " The exact command to execute the previously " "loaded code depends on the image format used. With uImage/uInitrd, the " "command is \n" "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\n" " and with native Linux images it is" msgstr "" #. Tag: screen #: boot-installer.xml:245 #, no-c-format msgid "bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}" msgstr "" #. Tag: para #: boot-installer.xml:247 #, no-c-format msgid "" "Note: When booting standard linux images, it is important to load the " "initial ramdisk image after the kernel and the dtb as U-Boot sets the " "filesize variable to the size of the last file loaded and the bootz command " "requires the size of the ramdisk image to work correctly. In case of booting " "a platform-specific kernel, i.e. a kernel without device-tree, simply omit " "the ${fdt_addr_r} parameter." msgstr "" #. Tag: title #: boot-installer.xml:258 #, no-c-format msgid "Pre-built netboot tarball" msgstr "" #. Tag: para #: boot-installer.xml:259 #, no-c-format msgid "" "&debian; provides a pre-built tarball (&armmp-netboot-tarball;) that can " "simply be unpacked on your tftp server and contains all files necessary for " "netbooting. It also includes a boot script that automates all steps to load " "the installer. Modern U-Boot versions contain a tftp autoboot feature that " "becomes active if there is no bootable local storage device (MMC/SD, USB, " "IDE/SATA/SCSI) and then loads this boot script from the tftp server. " "Prerequisite for using this feature is that you have a dhcp server in your " "network which provides the client with the address of the tftp server." msgstr "" #. Tag: para #: boot-installer.xml:271 #, no-c-format msgid "" "If you would like to trigger the tftp autoboot feature from the U-Boot " "commandline, you can use the follwing command:" msgstr "" #. Tag: screen #: boot-installer.xml:274 #, no-c-format msgid "run bootcmd_dhcp" msgstr "" #. Tag: para #: boot-installer.xml:276 #, no-c-format msgid "" "To manually load the bootscript provided by the tarball, you can " "alternatively issue the following commands at the U-Boot prompt:" msgstr "" #. Tag: screen #: boot-installer.xml:280 #, no-c-format msgid "" "setenv autoload no\n" "dhcp\n" "tftpboot ${scriptaddr} /debian-installer/armhf/tftpboot.scr\n" "source ${scriptaddr}" msgstr "" #. Tag: title #: boot-installer.xml:288 #, no-c-format msgid "Booting from USB Memory Stick with UEFI" msgstr "" #. Tag: para #: boot-installer.xml:294 boot-installer.xml:553 #, no-c-format msgid "" "If your computer will boot from USB, this will probably be the easiest route " "for installation. Assuming you have prepared everything from and , just plug your " "USB stick into some free USB connector and reboot the computer. The system " "should boot up, and unless you have used the flexible way to build the stick " "and not enabled it, you should be presented with a graphical boot menu (on " "hardware that supports it). Here you can select various installer options, " "or just hit &enterkey;." msgstr "" #. Tag: title #: boot-installer.xml:310 #, no-c-format msgid "Booting from a USB stick in U-Boot" msgstr "" #. Tag: para #: boot-installer.xml:311 #, no-c-format msgid "" "Many modern U-Boot versions have USB support and allow booting from USB mass " "storage devices such as USB sticks. Unfortunately the exact steps required " "to do that can vary quite a bit from device to device." msgstr "" #. Tag: para #: boot-installer.xml:318 #, no-c-format msgid "" "U-Boot v2014.10 has introduced a common commandline handling and autoboot " "framework. This allows building generic boot images that work on any system " "implementing this framework. The &d-i; supports installation from a USB " "stick on such systems, but unfortunately not all platforms have adopted this " "new framework yet." msgstr "" #. Tag: para #: boot-installer.xml:327 #, no-c-format msgid "" "To build a bootable USB stick for installing &debian;, unpack the hd-media " "tarball (see ) onto a USB stick formatted " "with a filesystem supported by the U-Boot version on your device. For modern " "U-Boot versions, any of FAT16 / FAT32 / ext2 / ext3 / ext4 usually works. " "Then copy the ISO image file of the first &debian; installation CD or DVD " "onto the stick." msgstr "" #. Tag: para #: boot-installer.xml:337 #, no-c-format msgid "" "The autoboot framework in modern U-Boot versions works similar to the boot " "ordering options in a PC BIOS, i.e. it checks a list of possible boot " "devices for a valid boot image and starts the first one it finds. If there " "is no operating system installed, plugging in the USB stick and powering up " "the system should result in starting the installer. You can also initiate " "the USB-boot process any time from the U-Boot prompt by entering the " "run bootcmd_usb0 command." msgstr "" #. Tag: para #: boot-installer.xml:347 #, no-c-format msgid "" "One problem that can come up when booting from a USB stick while using a " "serial console can be a console baudrate mismatch. If a console variable is " "defined in U-Boot, the &d-i; boot script automatically passes it to the " "kernel to set the primary console device and, if applicable, the console " "baudrate. Unfortunately the handling of the console variable varies from " "platform to platform - on some platforms, the console variable includes the " "baudrate (as in console=ttyS0,115200), while on other " "platforms the console variable contains only the device (as in " "console=ttyS0). The latter case leads to a garbled console " "output when the default baudrate differs between U-Boot and the kernel. " "Modern U-Boot versions often use 115200 baud while the kernel still defaults " "to the traditional 9600 baud. If this happens, you should manually set the " "console variable to contain the correct baudrate for your system and then " "start the installer with the run bootcmd_usb0 command." msgstr "" #. Tag: title #: boot-installer.xml:368 #, no-c-format msgid "Using pre-built SD-card images with the installer" msgstr "" #. Tag: para #: boot-installer.xml:369 #, no-c-format msgid "" "For a number of systems, Debian provides SD card images that contain both U-" "Boot and the &d-i;. These images are provided in two variants - one for " "downloading the software packages over the network (available at &armmp-" "netboot-sd-img;) and one for offline installations using a Debian CD/DVD " "(available at &armmp-hd-media-sd-img;). To save space and network bandwidth, " "the images consist of two parts - a system-dependent part named " "firmware.<system-type>.img.gz, and a system-independent " "part named partition.img.gz." msgstr "" #. Tag: para #: boot-installer.xml:380 #, no-c-format msgid "" "To create a complete image from the two parts on Linux systems, you can use " "zcat as follows: zcat firmware.<system-type>." "img.gz partition.img.gz > complete_image.img On " "Windows systems, you have to first decompress the two parts separately, " "which can be done e.g. by using 7-Zip, and then concatenate the decompressed " "parts together by running the command copy /b " "firmware.<system-type>.img + partition.img complete_image.img in a Windows CMD.exe window." msgstr "" #. Tag: para #: boot-installer.xml:394 #, no-c-format msgid "" "Write the resulting image onto an SD card, e.g. by running the following " "command on a Linux system: cat complete_image.img " "> /dev/SD_CARD_DEVICE After plugging the SD card " "into the target system and powering the system up, the installer is loaded " "from the SD card. If you use the hd-media variant for offline installations, " "you must provide the installer with access to the first &debian; CD/DVD on a " "separate medium, which can e.g. be a CD/DVD ISO image on a USB stick." msgstr "" #. Tag: para #: boot-installer.xml:406 #, no-c-format msgid "" "When you come to the partitioning step in the installer (see ), you can delete or replace any previous partitions on " "the card. Once the installer is started, it runs completely in the system's " "main memory and does not need to access the SD card anymore, so you can use " "the full card for installing &debian;. The easiest way to create a proper " "partition layout on the SD card is to let the installer automatically create " "one for you (see )." msgstr "" #. Tag: title #: boot-installer.xml:547 #, no-c-format msgid "Booting from USB Memory Stick" msgstr "" #. Tag: title #: boot-installer.xml:568 boot-installer.xml:1081 boot-installer.xml:1737 #: boot-installer.xml:2155 #, no-c-format msgid "Booting from a CD-ROM" msgstr "" #. Tag: para #: boot-installer.xml:574 boot-installer.xml:1087 boot-installer.xml:1743 #: boot-installer.xml:2161 #, no-c-format msgid "" "If you have a CD set, and if your machine supports booting directly off the " "CD, great! Simply configure your system for booting " "off a CD as described in , " "insert your CD, reboot, and proceed to the next chapter." msgstr "" #. Tag: para #: boot-installer.xml:584 boot-installer.xml:1097 boot-installer.xml:1753 #: boot-installer.xml:2171 #, no-c-format msgid "" "Note that certain CD drives may require special drivers, and thus be " "inaccessible in the early installation stages. If it turns out the standard " "way of booting off a CD doesn't work for your hardware, revisit this chapter " "and read about alternate kernels and installation methods which may work for " "you." msgstr "" #. Tag: para #: boot-installer.xml:592 boot-installer.xml:1105 boot-installer.xml:1761 #: boot-installer.xml:2179 #, no-c-format msgid "" "Even if you cannot boot from CD-ROM, you can probably install the &debian; " "system components and any packages you want from CD-ROM. Simply boot using a " "different medium and when it's time to install the operating system, base " "system, and any additional packages, point the installation system at the CD-" "ROM drive." msgstr "" #. Tag: para #: boot-installer.xml:600 boot-installer.xml:1113 boot-installer.xml:1769 #: boot-installer.xml:2187 #, no-c-format msgid "" "If you have problems booting, see ." msgstr "" #. Tag: title #: boot-installer.xml:610 #, no-c-format msgid "Booting from Windows" msgstr "" #. Tag: para #: boot-installer.xml:611 #, no-c-format msgid "To start the installer from Windows, you can either" msgstr "" #. Tag: para #: boot-installer.xml:616 #, no-c-format msgid "" "obtain CD-ROM/DVD-ROM or USB memory " "stick installation media as described in respective or" msgstr "" #. Tag: para #: boot-installer.xml:624 #, no-c-format msgid "" "download a standalone Windows executable, which is available as tools/win32-" "loader/stable/win32-loader.exe on the &debian; mirrors." msgstr "" #. Tag: para #: boot-installer.xml:632 #, no-c-format msgid "" "If you use an installation CD or DVD, a pre-installation program should be " "launched automatically when you insert the disc. In case Windows does not " "start it automatically, or if you are using a USB memory stick, you can run " "it manually by accessing the device and executing setup.exe." msgstr "" #. Tag: para #: boot-installer.xml:640 #, no-c-format msgid "" "After the program has been started, a few preliminary questions will be " "asked and the system will be prepared to reboot into the &debian-gnu; " "installer." msgstr "" #. Tag: title #: boot-installer.xml:650 #, no-c-format msgid "Booting from DOS using loadlin" msgstr "" #. Tag: para #: boot-installer.xml:651 #, no-c-format msgid "" "Boot into DOS (not Windows). To do this, you can for instance boot from a " "recovery or diagnostic disk." msgstr "" #. Tag: para #: boot-installer.xml:656 #, no-c-format msgid "" "If you can access the installation CD, change the current drive to the CD-" "ROM drive, e.g. \n" "d:\n" " else make sure you have first prepared your hard " "disk as explained in , and change the " "current drive to it if needed." msgstr "" #. Tag: para #: boot-installer.xml:666 #, no-c-format msgid "" "Enter the subdirectory for the flavor you chose, e.g., " "\n" "cd \\&x86-install-dir;\n" " If you prefer using the graphical installer, " "enter the gtk sub-directory. \n" "cd gtk\n" " Next, execute install.bat. " "The kernel will load and launch the installer system." msgstr "" #. Tag: title #: boot-installer.xml:684 #, no-c-format msgid "" "Booting from Linux using LILO or GRUB" msgstr "" #. Tag: para #: boot-installer.xml:687 #, no-c-format msgid "" "To boot the installer from hard disk, you must first download and place the " "needed files as described in ." msgstr "" #. Tag: para #: boot-installer.xml:692 #, no-c-format msgid "" "If you intend to use the hard drive only for booting and then download " "everything over the network, you should download the netboot/" "debian-installer/&architecture;/initrd.gz file and its " "corresponding kernel netboot/debian-installer/&architecture;/" "linux. This will allow you to repartition the hard disk from " "which you boot the installer, although you should do so with care." msgstr "" #. Tag: para #: boot-installer.xml:702 #, no-c-format msgid "" "Alternatively, if you intend to keep an existing partition on the hard drive " "unchanged during the install, you can download the hd-media/initrd." "gz file and its kernel, as well as copy a CD (or DVD) iso to the " "drive (make sure the file is named ending in .iso). The " "installer can then boot from the drive and install from the CD/DVD image, " "without needing the network." msgstr "" #. Tag: para #: boot-installer.xml:711 #, no-c-format msgid "" "For LILO, you will need to configure two essential things " "in /etc/lilo.conf: to " "load the initrd.gz installer at boot time; have the vmlinuz kernel use " "a RAM disk as its root partition. Here is " "a /etc/lilo.conf example:" msgstr "" #. Tag: screen #: boot-installer.xml:732 #, no-c-format msgid "" "image=/boot/newinstall/vmlinuz\n" " label=newinstall\n" " initrd=/boot/newinstall/initrd.gz" msgstr "" #. Tag: para #: boot-installer.xml:732 #, no-c-format msgid "" "For more details, refer to the initrd 4 and " "lilo.conf 5 man pages. Now run lilo and " "reboot." msgstr "" #. Tag: para #: boot-installer.xml:741 #, no-c-format msgid "" "The procedure for GRUB1 is quite similar. Locate your " "menu.lst in the /boot/grub/ " "directory (or sometimes /boot/boot/grub/) and add an " "entry for the installer, for example (assuming /boot is " "on the first partition of the first disk in the system):" msgstr "" #. Tag: screen #: boot-installer.xml:749 #, no-c-format msgid "" "title New Install\n" "root (hd0,0)\n" "kernel /boot/newinstall/vmlinuz\n" "initrd /boot/newinstall/initrd.gz" msgstr "" #. Tag: para #: boot-installer.xml:751 #, no-c-format msgid "" "The procedure for GRUB2 is very similar. The file is " "named grub.cfg instead of menu.lst. An entry for the installer would be for instance for example:" msgstr "" #. Tag: screen #: boot-installer.xml:757 #, no-c-format msgid "" "menuentry 'New Install' {\n" "insmod part_msdos\n" "insmod ext2\n" "set root='(hd0,msdos1)'\n" "linux /boot/newinstall/vmlinuz\n" "initrd /boot/newinstall/initrd.gz\n" "}" msgstr "" #. Tag: para #: boot-installer.xml:759 #, no-c-format msgid "" "From here on, there should be no difference between GRUB " "or LILO." msgstr "" #. Tag: title #: boot-installer.xml:768 boot-installer.xml:2023 #, no-c-format msgid "Booting from Floppies" msgstr "" #. Tag: para #: boot-installer.xml:769 boot-installer.xml:2031 #, no-c-format msgid "" "You will have already downloaded the floppy images you needed and created " "floppies from the images in ." msgstr "" #. Tag: para #: boot-installer.xml:776 #, no-c-format msgid "" "To boot from the installer boot floppy, place it in the primary floppy " "drive, shut down the system as you normally would, then turn it back on." msgstr "" #. Tag: para #: boot-installer.xml:782 #, no-c-format msgid "" "For installing from an LS-120 drive (ATAPI version) with a set of floppies, " "you need to specify the virtual location for the floppy device. This is done " "with the root= boot argument, giving the device that " "the ide-floppy driver maps the device to. For example, if your LS-120 drive " "is connected as the first IDE device (master) on the second cable, you enter " "install root=/dev/hdc at the boot prompt." msgstr "" #. Tag: para #: boot-installer.xml:792 #, no-c-format msgid "" "Note that on some machines, Control Alt Delete does not properly reset the " "machine, so a hard reboot is recommended. If you are " "installing from an existing operating system (e.g., from a DOS box) you " "don't have a choice. Otherwise, please do a hard reboot when booting." msgstr "" #. Tag: para #: boot-installer.xml:801 #, no-c-format msgid "" "The floppy disk will be accessed, and you should then see a screen that " "introduces the boot floppy and ends with the boot: prompt." msgstr "" #. Tag: para #: boot-installer.xml:807 #, no-c-format msgid "" "Once you press &enterkey;, you should see the message " "Loading..., followed by " "Uncompressing Linux..., and then a " "screenfull or so of information about the hardware in your system. More " "information on this phase of the boot process can be found below in ." msgstr "" #. Tag: para #: boot-installer.xml:816 #, no-c-format msgid "" "After booting from the boot floppy, the root floppy is requested. Insert the " "root floppy and press &enterkey;, and the contents are loaded into memory. " "The installer program debian-installer is automatically " "launched." msgstr "" #. Tag: title #: boot-installer.xml:826 boot-installer.xml:1449 boot-installer.xml:1591 #: boot-installer.xml:1645 boot-installer.xml:1967 boot-installer.xml:2115 #, no-c-format msgid "Booting with TFTP" msgstr "" #. Tag: para #: boot-installer.xml:851 #, no-c-format msgid "There are various ways to do a TFTP boot on i386." msgstr "" #. Tag: title #: boot-installer.xml:857 #, no-c-format msgid "NIC or Motherboard that support PXE" msgstr "" #. Tag: para #: boot-installer.xml:858 #, no-c-format msgid "" "It could be that your Network Interface Card or Motherboard provides PXE " "boot functionality. This is a Intel " "re-implementation of TFTP boot. If so, you may be able to configure your " "BIOS to boot from the network." msgstr "" #. Tag: title #: boot-installer.xml:869 #, no-c-format msgid "NIC with Network BootROM" msgstr "" #. Tag: para #: boot-installer.xml:870 #, no-c-format msgid "" "It could be that your Network Interface Card provides TFTP boot " "functionality." msgstr "" #. Tag: para #: boot-installer.xml:875 #, no-c-format msgid "" "Let us (&email-debian-boot-list;) know how did you manage it. " "Please refer to this document." msgstr "" #. Tag: title #: boot-installer.xml:883 #, no-c-format msgid "Etherboot" msgstr "" #. Tag: para #: boot-installer.xml:884 #, no-c-format msgid "" "The etherboot project " "provides bootdiskettes and even bootroms that do a TFTPboot." msgstr "" #. Tag: title #: boot-installer.xml:894 #, no-c-format msgid "The Boot Screen" msgstr "" #. Tag: para #: boot-installer.xml:895 #, no-c-format msgid "" "When the installer boots, you should be presented with a friendly graphical " "screen showing the &debian; logo and a menu:" msgstr "" #. Tag: screen #: boot-installer.xml:900 #, no-c-format msgid "" "Installer boot menu\n" "\n" "Install\n" "Graphical install\n" "Advanced options >\n" "Help\n" "Install with speech synthesis" msgstr "" #. Tag: para #: boot-installer.xml:904 #, no-c-format msgid "" "This graphical screen will look very slightly different depending on how " "your computer has booted (BIOS or UEFI), but the same options will be shown." msgstr "" #. Tag: para #: boot-installer.xml:912 #, no-c-format msgid "" "Depending on the installation method you are using, the Graphical " "install option may not be available. Bi-arch images additionally " "have a 64 bit variant for each install option, right below it, thus almost " "doubling the number of options." msgstr "" #. Tag: para #: boot-installer.xml:919 #, no-c-format msgid "" "For a normal installation, select either the Graphical install or the Install entry — using either the arrow " "keys on your keyboard or by typing the first (highlighted) letter — " "and press &enterkey; to boot the installer. The Install entry " "is already selected by default." msgstr "" #. Tag: para #: boot-installer.xml:927 #, no-c-format msgid "" "The Advanced options entry gives access to a second menu that " "allows to boot the installer in expert mode, in rescue mode and for " "automated installs." msgstr "" #. Tag: para #: boot-installer.xml:933 #, no-c-format msgid "" "If you wish or need to add any boot parameters for either the installer or " "the kernel, press &tabkey; (BIOS boot) or &ekey; (UEFI boot). This will " "display the boot command for the selected menu entry and allow you to edit " "it to suit your needs. The help screens (see below) list some common " "possible options. Press &enterkey; (BIOS boot) or &f10key; (UEFI boot) to " "boot the installer with your options; pressing &escapekey; will return you " "to the boot menu and undo any changes you made." msgstr "" #. Tag: para #: boot-installer.xml:944 #, no-c-format msgid "" "Choosing the Help entry will result in the first help screen " "being displayed which gives an overview of all available help screens. To " "return to the boot menu after the help screens have been displayed, type " "'menu' at the boot prompt and press &enterkey;. All help screens have a boot " "prompt at which the boot command can be typed: \n" "Press F1 for the help index, or ENTER to boot:\n" " At this boot prompt you can either just press " "&enterkey; to boot the installer with default options or enter a specific " "boot command and, optionally, boot parameters. A number of boot parameters " "which might be useful can be found on the various help screens. If you do " "add any parameters to the boot command line, be sure to first type the boot " "method (the default is install) and a space before " "the first parameter (e.g., install fb=false)." msgstr "" #. Tag: para #: boot-installer.xml:962 #, no-c-format msgid "" "The keyboard is assumed to have a default American English layout at this " "point. This means that if your keyboard has a different (language-specific) " "layout, the characters that appear on the screen may be different from what " "you'd expect when you type parameters. Wikipedia has a schema of the US keyboard layout which can be used as a " "reference to find the correct keys to use." msgstr "" #. Tag: para #: boot-installer.xml:972 #, no-c-format msgid "" "If you are using a system that has the BIOS configured to use serial " "console, you may not be able to see the initial graphical splash screen upon " "booting the installer; you may even not see the boot menu. The same can " "happen if you are installing the system via a remote management device that " "provides a text interface to the VGA console. Examples of these devices " "include the text console of Compaq's integrated Lights Out " "(iLO) and HP's Integrated Remote Assistant (IRA)." msgstr "" #. Tag: para #: boot-installer.xml:982 #, no-c-format msgid "" "To bypass the graphical boot screen you can either blindly press &escapekey; " "to get a text boot prompt, or (equally blindly) press H " "followed by &enterkey; to select the Help option described " "above. After that your keystrokes should be echoed at the prompt. To prevent " "the installer from using the framebuffer for the rest of the installation, " "you will also want to add vga=normal fb=false to the " "boot prompt, as described in the help text." msgstr "" #. Tag: title #: boot-installer.xml:998 #, no-c-format msgid "The Graphical Installer" msgstr "" #. Tag: para #: boot-installer.xml:999 #, no-c-format msgid "" "The graphical version of the installer is only available for a limited " "number of architectures, including &arch-title;. The functionality of the " "graphical installer is essentially the same as that of the text-based " "installer as it basically uses the same programs, but with a different " "frontend." msgstr "" #. Tag: para #: boot-installer.xml:1007 #, no-c-format msgid "" "Although the functionality is identical, the graphical installer still has a " "few significant advantages. The main advantage is that it supports more " "languages, namely those that use a character set that cannot be displayed " "with the text-based newt frontend. It also has a few " "usability advantages such as the option to use a mouse, and in some cases " "several questions can be displayed on a single screen." msgstr "" #. Tag: para #: boot-installer.xml:1016 #, no-c-format msgid "" "The graphical installer is available with all CD images and with the hd-" "media installation method. To boot the graphical installer simply select the " "relevant option from the boot menu. Expert and rescue mode for the graphical " "installer can be selected from the Advanced options menu. The " "previously used boot methods installgui, " "expertgui and rescuegui can " "still be used from the boot prompt which is shown after selecting the " "Help option in the boot menu." msgstr "" #. Tag: para #: boot-installer.xml:1027 #, no-c-format msgid "" "There is also a graphical installer image that can be netbooted. And there " "is a special mini ISO image " " The mini ISO image can be downloaded from a &debian; mirror as " "described in . Look for " "netboot/gtk/mini.iso. , which is " "mainly useful for testing." msgstr "" #. Tag: para #: boot-installer.xml:1040 #, no-c-format msgid "" "For &arch-title;, currently only an experimental mini ISO " "image is available The mini ISO image " "can be downloaded from a &debian; mirror as described in . Look for netboot/gtk/mini.iso. " " . It should work on almost all PowerPC systems that have " "an ATI graphical card, but is unlikely to work on other systems." msgstr "" #. Tag: para #: boot-installer.xml:1054 #, no-c-format msgid "" "Just as with the text-based installer it is possible to add boot parameters " "when starting the graphical installer." msgstr "" #. Tag: para #: boot-installer.xml:1060 #, no-c-format msgid "" "The graphical installer requires significantly more memory to run than the " "text-based installer: &minimum-memory-gtk;. If insufficient memory is " "available, it will automatically fall back to the text-based newt frontend." msgstr "" #. Tag: para #: boot-installer.xml:1067 #, no-c-format msgid "" "If the amount of memory in your system is below &minimum-memory;, the " "graphical installer may fail to boot at all while booting the text-based " "installer would still work. Using the text-based installer is recommended " "for systems with little available memory." msgstr "" #. Tag: title #: boot-installer.xml:1121 #, no-c-format msgid "CD Contents" msgstr "" #. Tag: para #: boot-installer.xml:1123 #, no-c-format msgid "" "There are three basic variations of &debian; Install CDs. The " "Business Card CD has a minimal installation that will " "fit on the small form factor CD media. It requires a network connection in " "order to install the rest of the base installation and make a usable system. " "The Network Install CD has all of the packages for a " "base install but requires a network connection to a &debian; mirror site in " "order to install the extra packages one would want for a complete system . " "The set of &debian; CDs can install a complete system from the wide range of " "packages without needing access to the network." msgstr "" #. Tag: para #: boot-installer.xml:1139 #, no-c-format msgid "" "The IA-64 architecture uses the next generation Extensible Firmware " "Interface (EFI) from Intel. Unlike the traditional x86 BIOS which knows " "little about the boot device other than the partition table and Master Boot " "Record (MBR), EFI can read and write files from FAT16 or FAT32 formatted " "disk partitions. This simplifies the often arcane process of starting a " "system. The system boot loader and the EFI firmware that supports it have a " "full filesystem to store the files necessary for booting the machine. This " "means that the system disk on an IA-64 system has an additional disk " "partition dedicated to EFI instead of the simple MBR or boot block on more " "conventional systems." msgstr "" #. Tag: para #: boot-installer.xml:1155 #, no-c-format msgid "" "The &debian; Installer CD contains a small EFI partition where the " "ELILO bootloader, its configuration file, the installer's " "kernel, and initial filesystem (initrd) are located. The running system also " "contains an EFI partition where the necessary files for booting the system " "reside. These files are readable from the EFI Shell as described below." msgstr "" #. Tag: para #: boot-installer.xml:1164 #, no-c-format msgid "" "Most of the details of how ELILO actually loads and " "starts a system are transparent to the system installer. However, the " "installer must set up an EFI partition prior to installing the base system. " "Otherwise, the installation of ELILO will fail, rendering " "the system un-bootable. The EFI partition is allocated and formatted in the " "partitioning step of the installation prior to loading any packages on the " "system disk. The partitioning task also verifies that a suitable EFI " "partition is present before allowing the installation to proceed." msgstr "" #. Tag: para #: boot-installer.xml:1176 #, no-c-format msgid "" "The EFI Boot Manager is presented as the last step of the firmware " "initialization. It displays a menu list from which the user can select an " "option. Depending on the model of system and what other software has been " "loaded on the system, this menu may be different from one system to another. " "There should be at least two menu items displayed, Boot Option " "Maintenance Menu and EFI Shell (Built-in). " "Using the first option is preferred, however, if that option is not " "available or the CD for some reason does not boot with it, use the second " "option." msgstr "" #. Tag: title #: boot-installer.xml:1195 #, no-c-format msgid "IMPORTANT" msgstr "" #. Tag: para #: boot-installer.xml:1196 #, no-c-format msgid "" "The EFI Boot Manager will select a default boot action, typically the first " "menu choice, within a pre-set number of seconds. This is indicated by a " "countdown at the bottom of the screen. Once the timer expires and the " "systems starts the default action, you may have to reboot the machine in " "order to continue the installation. If the default action is the EFI Shell, " "you can return to the Boot Manager by running exit at the " "shell prompt." msgstr "" #. Tag: title #: boot-installer.xml:1208 #, no-c-format msgid "Option 1: Booting from the Boot Option Maintenance Menu" msgstr "" #. Tag: para #: boot-installer.xml:1215 #, no-c-format msgid "" "Insert the CD in the DVD/CD drive and reboot the machine. The firmware will " "display the EFI Boot Manager page and menu after it completes its system " "initialization." msgstr "" #. Tag: para #: boot-installer.xml:1221 #, no-c-format msgid "" "Select Boot Maintenance Menu from the menu with the arrow " "keys and press ENTER. This will display a new menu." msgstr "" #. Tag: para #: boot-installer.xml:1227 #, no-c-format msgid "" "Select Boot From a File from the menu with the arrow keys " "and press ENTER. This will display a list of devices " "probed by the firmware. You should see two menu lines containing either the " "label Debian Inst [Acpi ... or Removable Media " "Boot. If you examine the rest of the menu line, you will notice " "that the device and controller information should be the same." msgstr "" #. Tag: para #: boot-installer.xml:1238 #, no-c-format msgid "" "You can choose either of the entries that refer to the CD/DVD drive. Select " "your choice with the arrow keys and press ENTER. If you " "choose Removable Media Boot the machine will immediately " "start the boot load sequence. If you choose Debian Inst [Acpi ... instead, it will display a directory listing of the bootable " "portion of the CD, requiring you to proceed to the next (additional) step." msgstr "" #. Tag: para #: boot-installer.xml:1249 #, no-c-format msgid "" "You will only need this step if you chose Debian Inst [Acpi .... The directory listing will also show [Treat like " "Removable Media Boot] on the next to the last line. Select this " "line with the arrow keys and press ENTER. This will start " "the boot load sequence." msgstr "" #. Tag: para #: boot-installer.xml:1261 #, no-c-format msgid "" "These steps start the &debian; boot loader which will display a menu page " "for you to select a boot kernel and options. Proceed to selecting the boot " "kernel and options." msgstr "" #. Tag: title #: boot-installer.xml:1271 #, no-c-format msgid "Option 2: Booting from the EFI Shell" msgstr "" #. Tag: para #: boot-installer.xml:1272 #, no-c-format msgid "" "If, for some reason, option 1 is not successful, reboot the machine and when " "the EFI Boot Manager screen appears there should be one option called " "EFI Shell [Built-in]. Boot the &debian; Installer CD with " "the following steps:" msgstr "" #. Tag: para #: boot-installer.xml:1283 #, no-c-format msgid "" "Insert the CD in the DVD/CD drive and reboot the machine. The firmware will " "display the EFI Boot Manager page and menu after it completes system " "initialization." msgstr "" #. Tag: para #: boot-installer.xml:1289 #, no-c-format msgid "" "Select EFI Shell from the menu with the arrow keys and " "press ENTER. The EFI Shell will scan all of the bootable " "devices and display them to the console before displaying its command " "prompt. The recognized bootable partitions on devices will show a device " "name of fsn:. All other " "recognized partitions will be named blkn:. If you inserted the CD just before entering the " "shell, this may take a few extra seconds as it initializes the CD drive." msgstr "" #. Tag: para #: boot-installer.xml:1303 #, no-c-format msgid "" "Examine the output from the shell looking for the CDROM drive. It is most " "likely the fs0: device although other devices with " "bootable partitions will also show up as fsn." msgstr "" #. Tag: para #: boot-installer.xml:1310 #, no-c-format msgid "" "Enter fsn: and press " "ENTER to select that device where n is the partition number for the CDROM. The shell will now " "display the partition number as its prompt." msgstr "" #. Tag: para #: boot-installer.xml:1317 #, no-c-format msgid "" "Enter elilo and press ENTER. This will " "start the boot load sequence." msgstr "" #. Tag: para #: boot-installer.xml:1324 #, no-c-format msgid "" "As with option 1, these steps start the &debian; boot loader which will " "display a menu page for you to select a boot kernel and options. You can " "also enter the shorter fsn:elilo command at the shell prompt. Proceed to selecting the boot kernel " "and options." msgstr "" #. Tag: title #: boot-installer.xml:1338 #, no-c-format msgid "Installing using a Serial Console" msgstr "" #. Tag: para #: boot-installer.xml:1340 #, no-c-format msgid "" "You may choose to perform an install using a monitor and keyboard or using a " "serial connection. To use a monitor/keyboard setup, select an option " "containing the string [VGA console]. To install over a serial connection, " "choose an option containing the string [BAUD baud " "serial console], where BAUD is the speed of your " "serial console. Menu items for the most typical baud rate settings on the " "ttyS0 device are preconfigured." msgstr "" #. Tag: para #: boot-installer.xml:1351 #, no-c-format msgid "" "In most circumstances, you will want the installer to use the same baud rate " "as your connection to the EFI console. If you aren't sure what this setting " "is, you can obtain it using the command baud at the EFI " "shell." msgstr "" #. Tag: para #: boot-installer.xml:1358 #, no-c-format msgid "" "If there is not an option available that is configured for the serial device " "or baud rate you would like to use, you may override the console setting for " "one of the existing menu options. For example, to use a 57600 baud console " "over the ttyS1 device, enter console=ttyS1,57600n8 into " "the Boot: text window." msgstr "" #. Tag: para #: boot-installer.xml:1369 #, no-c-format msgid "" "Most IA-64 boxes ship with a default console setting of 9600 baud. This " "setting is rather slow, and the normal installation process will take a " "significant time to draw each screen. You should consider either increasing " "the baud rate used for performing the installation, or performing a Text " "Mode installation. See the Params help menu for " "instructions on starting the installer in Text Mode." msgstr "" #. Tag: para #: boot-installer.xml:1378 #, no-c-format msgid "" "If you select the wrong console type, you will be able to select the kernel " "and enter parameters but both the display and your input will go dead as " "soon as the kernel starts, requiring you to reboot before you can begin the " "installation." msgstr "" #. Tag: title #: boot-installer.xml:1387 #, no-c-format msgid "Selecting the Boot Kernel and Options" msgstr "" #. Tag: para #: boot-installer.xml:1389 #, no-c-format msgid "" "The boot loader will display a form with a menu list and a text window with " "a Boot: prompt. The arrow keys select an item from " "the menu and any text typed at the keyboard will appear in the text window. " "There are also help screens which can be displayed by pressing the " "appropriate function key. The General help screen " "explains the menu choices and the Params screen " "explains the common command line options." msgstr "" #. Tag: para #: boot-installer.xml:1401 #, no-c-format msgid "" "Consult the General help screen for the description " "of the kernels and install modes most appropriate for your installation. You " "should also consult below for any additional " "parameters that you may want to set in the Boot: text " "window. The kernel version you choose selects the kernel version that will " "be used for both the installation process and the installed system. If you " "encounter kernel problems with the installation, you may also have those " "same problems with the system you install. The following two steps will " "select and start the install:" msgstr "" #. Tag: para #: boot-installer.xml:1419 #, no-c-format msgid "" "Select the kernel version and installation mode most appropriate to your " "needs with the arrow keys." msgstr "" #. Tag: para #: boot-installer.xml:1424 #, no-c-format msgid "" "Enter any boot parameters by typing at the keyboard. The text will be " "displayed directly in the text window. This is where kernel parameters (such " "as serial console settings) are specified." msgstr "" #. Tag: para #: boot-installer.xml:1431 #, no-c-format msgid "" "Press ENTER. This will load and start the kernel. The " "kernel will display its usual initialization messages followed by the first " "screen of the &debian; Installer." msgstr "" #. Tag: para #: boot-installer.xml:1440 boot-installer.xml:1577 #, no-c-format msgid "" "Proceed to the next chapter to continue the installation where you will set " "up the language locale, network, and disk partitions." msgstr "" #. Tag: para #: boot-installer.xml:1451 #, no-c-format msgid "" "Booting an IA-64 system from the network is similar to a CD boot. The only " "difference is how the installation kernel is loaded. The EFI Boot Manager " "can load and start programs from a server on the network. Once the " "installation kernel is loaded and starts, the system install will proceed " "through the same steps as the CD install with the exception that the " "packages of the base install will be loaded from the network rather than the " "CD drive." msgstr "" #. Tag: para #: boot-installer.xml:1486 #, no-c-format msgid "" "Network booting an IA-64 system requires two architecture-specific actions. " "On the boot server, DHCP and TFTP must be configured to deliver " "elilo. On the client a new boot option must be defined in " "the EFI boot manager to enable loading over a network." msgstr "" #. Tag: title #: boot-installer.xml:1497 #, no-c-format msgid "Configuring the Server" msgstr "" #. Tag: para #: boot-installer.xml:1498 #, no-c-format msgid "" "A suitable TFTP entry for network booting an IA-64 system looks something " "like this: \n" "host mcmuffin {\n" " hardware ethernet 00:30:6e:1e:0e:83;\n" " fixed-address 10.0.0.21;\n" " filename \"debian-installer/ia64/elilo.efi\";\n" "}\n" " Note that the goal is to get elilo.efi running on the client." msgstr "" #. Tag: para #: boot-installer.xml:1508 #, no-c-format msgid "" "Extract the netboot.tar.gz file into the directory used " "as the root for your tftp server. Typical tftp root directories include " "/var/lib/tftp and /tftpboot. This " "will create a debian-installer directory tree " "containing the boot files for an IA-64 system." msgstr "" #. Tag: screen #: boot-installer.xml:1518 #, no-c-format msgid "" "# cd /var/lib/tftp\n" "# tar xvfz /home/user/netboot.tar.gz\n" "./\n" "./debian-installer/\n" "./debian-installer/ia64/\n" "[...]" msgstr "" #. Tag: para #: boot-installer.xml:1518 #, no-c-format msgid "" "The netboot.tar.gz contains an elilo.conf file that should work for most configurations. However, should you " "need to make changes to this file, you can find it in the debian-" "installer/ia64/ directory. It is possible to have different " "config files for different clients by naming them using the client's IP " "address in hex with the suffix .conf instead of " "elilo.conf. See documentation provided in the " "elilo package for details." msgstr "" #. Tag: title #: boot-installer.xml:1535 #, no-c-format msgid "Configuring the Client" msgstr "" #. Tag: para #: boot-installer.xml:1536 #, no-c-format msgid "" "To configure the client to support TFTP booting, start by booting to EFI and " "entering the Boot Option Maintenance Menu. " " Add a boot option. You " "should see one or more lines with the text Load File [Acpi" "()/.../Mac()]. If more than one of these entries exist, choose " "the one containing the MAC address of the interface from which you'll be " "booting. Use the arrow keys to highlight your choice, then press enter. Name the entry Netboot or something similar, save, and exit back to the boot options " "menu. You should see the new boot option " "you just created, and selecting it should initiate a DHCP query, leading to " "a TFTP load of elilo.efi from the server." msgstr "" #. Tag: para #: boot-installer.xml:1568 #, no-c-format msgid "" "The boot loader will display its prompt after it has downloaded and " "processed its configuration file. At this point, the installation proceeds " "with the same steps as a CD install. Select a boot option as in above and " "when the kernel has completed installing itself from the network, it will " "start the &debian; Installer." msgstr "" #. Tag: title #: boot-installer.xml:1594 boot-installer.xml:1618 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para #: boot-installer.xml:1595 #, no-c-format msgid "" "After entering the command monitor use \n" "bootp():\n" " on SGI machines to boot linux and to begin " "installation of the &debian; Software. In order to make this work you may " "have to unset the netaddr environment variable. Type " "\n" "unsetenv netaddr\n" " in the command monitor to do this." msgstr "" #. Tag: title #: boot-installer.xml:1615 boot-installer.xml:2406 #, no-c-format msgid "Boot Parameters" msgstr "" #. Tag: para #: boot-installer.xml:1619 #, no-c-format msgid "" "On SGI machines you can append boot parameters to the bootp(): command in the command monitor." msgstr "" #. Tag: para #: boot-installer.xml:1624 #, no-c-format msgid "" "Following the bootp(): command you can give the path and " "name of the file to boot if you did not give an explicit name via your bootp/" "dhcp server. Example: \n" "bootp():/boot/tftpboot.img\n" " Further kernel parameters can be passed via " "append:" msgstr "" #. Tag: screen #: boot-installer.xml:1634 #, no-c-format msgid "bootp(): append=\"root=/dev/sda1\"" msgstr "" #. Tag: title #: boot-installer.xml:1677 #, no-c-format msgid "s390 Limitations" msgstr "" #. Tag: para #: boot-installer.xml:1678 #, no-c-format msgid "" "In order to run the installation system a working network setup and ssh " "session is needed on S/390." msgstr "" #. Tag: para #: boot-installer.xml:1683 #, no-c-format msgid "" "The booting process starts with a network setup that prompts you for several " "network parameters. If the setup is successful, you will login to the system " "by starting an ssh session which will launch the standard installation " "system." msgstr "" #. Tag: title #: boot-installer.xml:1694 #, no-c-format msgid "s390 Boot Parameters" msgstr "" #. Tag: para #: boot-installer.xml:1695 #, no-c-format msgid "" "On S/390 you can append boot parameters in the parm file. This file can " "either be in ASCII or EBCDIC format. It needs to be fixed-width with 80 " "characters per line. A sample parm file parmfile.debian " "is provided with the installation images. If a parameter is too long to fit " "into the 80 characters limit it can simply be continued in the first column " "of the next line. All the lines are concatenated without spaces when being " "passed to the kernel." msgstr "" #. Tag: para #: boot-installer.xml:1712 #, no-c-format msgid "" "If you boot the installer in a logical partition (LPAR) or virtual machine " "(VM) where a lot of devices are visible, you can instruct the kernel to " "restrict the list to a fixed set of devices. This is advised for the " "installer's boot process if a lot of disks are visible, most likely in LPAR " "mode. The cio_ignore option supports both a blacklist (to " "only disallow a few devices) and a whitelist (to only allow specific " "devices): \n" " # blacklist: just ignore the two devices 300 and 301\n" " cio_ignore=0.0.0300-0.0.0301\n" " # whitelist: ignore everything but 1150, FD00, FD01 and FD02\n" " cio_ignore=all,!0.0.1150,!0.0.fd00-0.0.fd02\n" " Please note that all devices numbers' hex digits " "need to be specified in lower case. Furthermore if this boot parameter is " "used all devices need to be listed: this includes at least disks, network " "devices and the console. To be considered during the installer's boot " "process the above option needs to be added to parmfile.debian." msgstr "" #. Tag: para #: boot-installer.xml:1776 #, no-c-format msgid "" "Currently, the only &arch-title; subarchitectures that support CD-ROM " "booting are PReP/CHRP (though not all systems) and New World PowerMacs. On " "PowerMacs, hold the c key, or else the combination of " "Command, Option, Shift, " "and Delete keys together while booting to boot from the " "factory default CD/DVD drive." msgstr "" #. Tag: para #: boot-installer.xml:1785 #, no-c-format msgid "" "To boot a PowerMac from an external Firewire CD/DVD drive invoke Open " "Firmware prompt first (see ), then " "type \n" "0 > boot fw/node/sbp-2/disk:,\\install\\yaboot\n" " for an alternative way to boot from the internal " "factory default CD/DVD drive type" msgstr "" #. Tag: screen #: boot-installer.xml:1796 #, no-c-format msgid "0 > boot cd:,\\install\\yaboot" msgstr "" #. Tag: para #: boot-installer.xml:1798 #, no-c-format msgid "" "OldWorld PowerMacs will not boot a &debian; CD, because OldWorld computers " "relied on a Mac OS ROM CD boot driver to be present on the CD, and a free-" "software version of this driver is not available. All OldWorld systems have " "floppy drives, so use the floppy drive to launch the installer, and then " "point the installer to the CD for the needed files." msgstr "" #. Tag: para #: boot-installer.xml:1807 #, no-c-format msgid "" "To boot &debian; CD/DVD on Pegasos II machine, hold Esc key " "immediately after pressing the power-on button, when SmartFirmware prompt " "appears, type" msgstr "" #. Tag: screen #: boot-installer.xml:1813 #, no-c-format msgid "boot cd install/pegasos" msgstr "" #. Tag: para #: boot-installer.xml:1815 #, no-c-format msgid "" "On YDL Powerstation machine, pres s immediately after " "Press 's' to enter Open Firmware message, when SLOF prompt " "appears type" msgstr "" #. Tag: screen #: boot-installer.xml:1820 #, no-c-format msgid "0 > boot cdrom" msgstr "" #. Tag: title #: boot-installer.xml:1826 #, no-c-format msgid "Booting from Hard Disk" msgstr "" #. Tag: para #: boot-installer.xml:1832 #, no-c-format msgid "" "Booting from an existing operating system is often a convenient option; for " "some systems it is the only supported method of installation." msgstr "" #. Tag: para #: boot-installer.xml:1838 #, no-c-format msgid "" "To boot the installer from hard disk, you will have already completed " "downloading and placing the needed files as described in ." msgstr "" #. Tag: title #: boot-installer.xml:1858 #, no-c-format msgid "Booting OldWorld PowerMacs from MacOS" msgstr "" #. Tag: para #: boot-installer.xml:1859 #, no-c-format msgid "" "If you set up BootX in , you can use it to " "boot into the installation system. Double click the BootX " "application icon. Click on the Options button and " "select Use Specified RAM Disk. This will give you the " "chance to select the ramdisk.image.gz file. You may " "need to select the No Video Driver checkbox, depending " "on your hardware. Then click the Linux button to shut " "down MacOS and launch the installer." msgstr "" #. Tag: title #: boot-installer.xml:1877 #, no-c-format msgid "Booting NewWorld Macs from OpenFirmware" msgstr "" #. Tag: para #: boot-installer.xml:1878 #, no-c-format msgid "" "You will have already placed the vmlinux, " "initrd.gz, yaboot, and " "yaboot.conf files at the root level of your HFS " "partition in . You will now have to boot " "into OpenFirmware (see ). At the " "prompt, type \n" "0 > boot hd:x,yaboot\n" " replacing x with the " "partition number of the HFS partition where the kernel and yaboot files were " "placed, followed by a &enterkey;. On some machines, you may need to use " "ide0: instead of hd:. In a few " "more seconds you will see a yaboot prompt \n" "boot:\n" " At yaboot's boot: prompt, type " "either install or install video=ofonly followed by a &enterkey;. The video=ofonly " "argument is for maximum compatibility; you can try it if install doesn't work. The &debian; installation program should start." msgstr "" #. Tag: title #: boot-installer.xml:1910 #, no-c-format msgid "Booting from USB memory stick" msgstr "" #. Tag: para #: boot-installer.xml:1911 #, no-c-format msgid "Currently, NewWorld PowerMac systems are known to support USB booting." msgstr "" #. Tag: para #: boot-installer.xml:1917 #, no-c-format msgid "" "Make sure you have prepared everything from . To boot a Macintosh system from a USB stick, you will need to use the " "Open Firmware prompt, since Open Firmware does not search USB storage " "devices by default. See ." msgstr "" #. Tag: para #: boot-installer.xml:1926 #, no-c-format msgid "" "You will need to work out where the USB storage device appears in the device " "tree, since at the moment ofpath cannot work that out " "automatically. Type dev / ls and devalias at the Open Firmware prompt to get a list of all known devices " "and device aliases. On the author's system with various types of USB stick, " "paths such as usb0/disk, usb0/hub/disk, /pci@f2000000/usb@1b,1/disk@1, and " "/pci@f2000000/usb@1b,1/hub@1/disk@1 work." msgstr "" #. Tag: para #: boot-installer.xml:1938 #, no-c-format msgid "" "Having worked out the device path, use a command like this to boot the " "installer: \n" "boot usb0/disk:2,\\\\:" "tbxi\n" " The 2 matches the " "Apple_HFS or Apple_Bootstrap partition onto which you copied the boot image " "earlier, and the ,\\\\:tbxi part instructs Open " "Firmware to boot from the file with an HFS file type of \"tbxi\" (i.e. " "yaboot) in the directory previously blessed with " "hattrib -b." msgstr "" #. Tag: para #: boot-installer.xml:1952 #, no-c-format msgid "" "The system should now boot up, and you should be presented with the " "boot: prompt. Here you can enter optional boot arguments, " "or just hit &enterkey;." msgstr "" #. Tag: para #: boot-installer.xml:1958 #, no-c-format msgid "" "This boot method is new, and may be difficult to get to work on some " "NewWorld systems. If you have problems, please file an installation report, " "as explained in ." msgstr "" #. Tag: para #: boot-installer.xml:1992 #, no-c-format msgid "Currently, PReP and New World PowerMac systems support netbooting." msgstr "" #. Tag: para #: boot-installer.xml:1996 #, no-c-format msgid "" "On machines with Open Firmware, such as NewWorld Power Macs, enter the boot " "monitor (see ) and use the command " "\n" "0 > boot enet:0\n" " If this doesn't work, you might have to add the " "filename like this: \n" "0 > boot enet:0,yaboot\n" " PReP and CHRP boxes may have different ways of " "addressing the network. On a PReP machine, you should try " "\n" "boot net:server_ipaddr,file,client_ipaddr\n" " On some PReP systems (e.g. Motorola PowerStack " "machines) the command help boot may give a " "description of syntax and available options." msgstr "" #. Tag: para #: boot-installer.xml:2024 #, no-c-format msgid "" "Booting from floppies is supported for &arch-title;, although it is " "generally only applicable for OldWorld systems. NewWorld systems are not " "equipped with floppy drives, and attached USB floppy drives are not " "supported for booting." msgstr "" #. Tag: para #: boot-installer.xml:2036 #, no-c-format msgid "" "To boot from the boot-floppy-hfs.img floppy, place it " "in floppy drive after shutting the system down, and before pressing the " "power-on button." msgstr "" #. Tag: para #: boot-installer.xml:2042 #, no-c-format msgid "" "For those not familiar with Macintosh floppy operations: a floppy placed in " "the machine prior to boot will be the first priority for the system to boot " "from. A floppy without a valid boot system will be ejected, and the machine " "will then check for bootable hard disk partitions." msgstr "" #. Tag: para #: boot-installer.xml:2049 #, no-c-format msgid "" "After booting, the root.bin floppy is requested. Insert " "the root floppy and press &enterkey;. The installer program is automatically " "launched after the root system has been loaded into memory." msgstr "" #. Tag: title #: boot-installer.xml:2060 #, no-c-format msgid "PowerPC Boot Parameters" msgstr "" #. Tag: para #: boot-installer.xml:2061 #, no-c-format msgid "" "Many older Apple monitors used a 640x480 67Hz mode. If your video appears " "skewed on an older Apple monitor, try appending the boot argument " "video=atyfb:vmode:6 , which will select that mode for " "most Mach64 and Rage video hardware. For Rage 128 hardware, this changes to " "video=aty128fb:vmode:6 ." msgstr "" #. Tag: title #: boot-installer.xml:2073 #, no-c-format msgid "Booting a ppc64el machine" msgstr "" #. Tag: para #: boot-installer.xml:2074 #, no-c-format msgid "How to boot a ppc64el machine:" msgstr "" #. Tag: title #: boot-installer.xml:2080 #, no-c-format msgid "Petitboot" msgstr "" #. Tag: para #: boot-installer.xml:2081 #, no-c-format msgid "" "Petitboot is a platform independent bootloader based on the Linux kexec. " "Petitboot supports loading kernel, initrd and device tree files from any " "Linux mountable filesystem, plus can load files from the network using the " "FTP, SFTP, TFTP, NFS, HTTP and HTTPS protocols. Petitboot can boot any " "operating system that includes kexec boot support." msgstr "" #. Tag: para #: boot-installer.xml:2089 #, no-c-format msgid "" "Petitboot looks for bootloader configuration files on mountable devices in " "the system, and can also be configured to use boot information from a DHCP " "server." msgstr "" #. Tag: para #: boot-installer.xml:2140 #, no-c-format msgid "" "On machines with OpenBoot, simply enter the boot monitor on the machine " "which is being installed (see ). Use " "the command boot net to boot from a TFTP and RARP " "server, or try boot net:bootp or boot net:" "dhcp to boot from a TFTP and BOOTP or DHCP server. You can pass " "extra boot parameters to &d-i; at the end of the boot " "command." msgstr "" #. Tag: para #: boot-installer.xml:2194 #, no-c-format msgid "" "Most OpenBoot versions support the boot cdrom command " "which is simply an alias to boot from the SCSI device on ID 6 (or the " "secondary master for IDE based systems)." msgstr "" #. Tag: title #: boot-installer.xml:2203 #, no-c-format msgid "IDPROM Messages" msgstr "" #. Tag: para #: boot-installer.xml:2204 #, no-c-format msgid "" "If you cannot boot because you get messages about a problem with " "IDPROM, then it's possible that your NVRAM battery, which " "holds configuration information for you firmware, has run out. See the " "Sun NVRAM FAQ for more " "information." msgstr "" #. Tag: title #: boot-installer.xml:2223 #, no-c-format msgid "Accessibility" msgstr "" #. Tag: para #: boot-installer.xml:2224 #, no-c-format msgid "" "Some users may need specific support because of e.g. some visual impairment. " "USB braille displays are detected " "automatically (not serial displays connected via a serial-to-USB converter), " "but most other Most accessibility features have to be enabled manually. On machines that support it, the boot menu emits a beep when it is " "ready to receive keystrokes. Some boot parameters can then be appended to enable accessibility features (see also ). Note that " "on most architectures the boot loader interprets your keyboard as a QWERTY " "keyboard." msgstr "" #. Tag: title #: boot-installer.xml:2244 #, no-c-format msgid "Installer front-end" msgstr "" #. Tag: para #: boot-installer.xml:2245 #, no-c-format msgid "" "The &debian; installer supports several front-ends for asking questions, " "with varying convenience for accessibility: notably, text uses plain text while newt uses text-based " "dialog boxes. The choice can be made at the boot prompt, see the " "documentation for DEBIAN_FRONTEND in ." msgstr "" #. Tag: title #: boot-installer.xml:2257 #, no-c-format msgid "USB Braille Displays" msgstr "" #. Tag: para #: boot-installer.xml:2258 #, no-c-format msgid "" "USB braille displays should be automatically detected. A textual version of " "the installer will then be automatically selected, and support for the " "braille display will be automatically installed on the target system. You " "can thus just press &enterkey; at the boot menu. Once brltty is started, you can choose a braille table by entering the " "preference menu. Documentation on key bindings for braille devices is " "available on the brltty website." msgstr "" #. Tag: title #: boot-installer.xml:2273 #, no-c-format msgid "Serial Braille Displays" msgstr "" #. Tag: para #: boot-installer.xml:2274 #, no-c-format msgid "" "Serial braille displays cannot safely be automatically detected (since that " "may damage some of them). You thus need to append the " "brltty=driver,port,table boot parameter to " "tell brltty which driver it should use. " "driver should be replaced by the two-letter " "driver code for your terminal (see the BRLTTY manual). port should be " "replaced by the name of the serial port the display is connected to, " "ttyS0 is the default, ttyUSB0 " "can be typically used when using a serial-to-USB converter. " "table is the name of the braille table to be used " "(see the BRLTTY manual); the " "English table is the default. Note that the table can be changed later by " "entering the preference menu. Documentation on key bindings for braille " "devices is available on the brltty website." msgstr "" #. Tag: title #: boot-installer.xml:2297 boot-installer.xml:3306 #, no-c-format msgid "Software Speech Synthesis" msgstr "" #. Tag: para #: boot-installer.xml:2298 #, no-c-format msgid "" "Support for software speech synthesis is available on all installer images " "which have the graphical installer, i.e. all netinst, CD and DVD images, and " "the netboot gtk variant. It can be activated by selecting it in the boot " "menu by typing s &enterkey;. The textual version of " "the installer will then be automatically selected, and support for software " "speech synthesis will be automatically installed on the target system." msgstr "" #. Tag: para #: boot-installer.xml:2307 #, no-c-format msgid "" "The first question (language) is spoken in english, and the remainder of " "installation is spoken in the selected language (if available in " "espeak)." msgstr "" #. Tag: para #: boot-installer.xml:2313 #, no-c-format msgid "" "The default speech rate is quite slow. To make it faster, press " "CapsLock6. To make it " "slower, press CapsLock5. The default volume should be medium. To make it louder, press " "CapsLock2. To make it " "quieter, press CapsLock1. To get more details on the browsing shortcuts, see the Speakup guide." msgstr "" #. Tag: title #: boot-installer.xml:2332 #, no-c-format msgid "Hardware Speech Synthesis" msgstr "" #. Tag: para #: boot-installer.xml:2333 #, no-c-format msgid "" "Support for hardware speech synthesis devices is available on all installer " "images which have the graphical installer, i.e. all netinst, CD and DVD " "images, and the netboot gtk variant. You thus need to select a " "Graphical install entry in the boot menu." msgstr "" #. Tag: para #: boot-installer.xml:2340 #, no-c-format msgid "" "Hardware speech synthesis devices cannot be automatically detected. You thus " "need to append the speakup.synth=driver boot parameter to tell speakup which driver it should use. driver " "should be replaced by the driver code for your device (see driver code list). The textual version of the " "installer will then be automatically selected, and support for the speech " "synthesis device will be automatically installed on the target system." msgstr "" #. Tag: title #: boot-installer.xml:2355 #, no-c-format msgid "Board Devices" msgstr "" #. Tag: para #: boot-installer.xml:2356 #, no-c-format msgid "" "Some accessibility devices are actual boards that are plugged inside the " "machine and that read text directly from the video memory. To get them to " "work framebuffer support must be disabled by using the vga=normal fb=false boot " "parameter. This will however reduce the number of available languages." msgstr "" #. Tag: para #: boot-installer.xml:2364 #, no-c-format msgid "" "If desired a textual version of the bootloader can be activated before " "adding the boot parameter by typing h &enterkey;." msgstr "" #. Tag: title #: boot-installer.xml:2372 #, no-c-format msgid "High-Contrast Theme" msgstr "" #. Tag: para #: boot-installer.xml:2373 #, no-c-format msgid "" "For users with low vision, the installer can use a high-contrast color theme " "that makes it more readable. To enable it, append the theme=dark boot parameter." msgstr "" #. Tag: title #: boot-installer.xml:2382 #, no-c-format msgid "Preseeding" msgstr "" #. Tag: para #: boot-installer.xml:2383 #, no-c-format msgid "" "Alternatively, &debian; can be installed completely automatically by using " "preseeding. This is documented in ." msgstr "" #. Tag: title #: boot-installer.xml:2391 #, no-c-format msgid "Accessibility of the installed system" msgstr "" #. Tag: para #: boot-installer.xml:2392 #, no-c-format msgid "" "Documentation on accessibility of the installed system is available on the " "Debian Accessibility wiki " "page." msgstr "" #. Tag: para #: boot-installer.xml:2407 #, no-c-format msgid "" "Boot parameters are Linux kernel parameters which are generally used to make " "sure that peripherals are dealt with properly. For the most part, the kernel " "can auto-detect information about your peripherals. However, in some cases " "you'll have to help the kernel a bit." msgstr "" #. Tag: para #: boot-installer.xml:2414 #, no-c-format msgid "" "If this is the first time you're booting the system, try the default boot " "parameters (i.e., don't try setting parameters) and see if it works " "correctly. It probably will. If not, you can reboot later and look for any " "special parameters that inform the system about your hardware." msgstr "" #. Tag: para #: boot-installer.xml:2421 #, no-c-format msgid "" "Information on many boot parameters can be found in the Linux BootPrompt HOWTO, " "including tips for obscure hardware. This section contains only a sketch of " "the most salient parameters. Some common gotchas are included below in ." msgstr "" #. Tag: title #: boot-installer.xml:2433 #, no-c-format msgid "Boot console" msgstr "" #. Tag: para #: boot-installer.xml:2435 #, no-c-format msgid "" "If you are booting with a serial console, generally the kernel will " "autodetect this. If you have a videocard (framebuffer) and a keyboard also " "attached to the computer which you wish to boot via serial console, you may " "have to pass the console=device argument to the kernel, where device " "is your serial device, which is usually something like ttyS0." msgstr "" #. Tag: para #: boot-installer.xml:2447 #, no-c-format msgid "" "You may need to specify parameters for the serial port, such as speed and " "parity, for instance console=ttyS0,9600n8; other " "typical speeds may be 57600 or 115200. Be sure to specify this option after " "---, so that it is copied into the bootloader configuration " "for the installed system (if supported by the installer for the bootloader)." msgstr "" #. Tag: para #: boot-installer.xml:2455 #, no-c-format msgid "" "In order to ensure the terminal type used by the installer matches your " "terminal emulator, the parameter TERM=type can be added. Note that the installer only supports " "the following terminal types: linux, bterm, ansi, vt102 and " "dumb. The default for serial console in &d-i; is " "vt102. If you are using a virtualization tool which " "does not provide conversion into such terminals types itself, e.g. QEMU/KVM, " "you can start it inside a screen session. That will " "indeed perform translation into the screen terminal type, " "which is very close to vt102." msgstr "" #. Tag: para #: boot-installer.xml:2471 #, no-c-format msgid "" "For &arch-title; the serial devices are ttya or " "ttyb. Alternatively, set the input-device and output-device OpenPROM variables to " "ttya." msgstr "" #. Tag: title #: boot-installer.xml:2483 #, no-c-format msgid "&debian; Installer Parameters" msgstr "" #. Tag: para #: boot-installer.xml:2484 #, no-c-format msgid "" "The installation system recognizes a few additional boot " "parameters With current kernels (2.6.9 or newer) you can " "use 32 command line options and 32 environment options. If these numbers are " "exceeded, the kernel will panic. which may be useful." msgstr "" #. Tag: para #: boot-installer.xml:2497 #, no-c-format msgid "" "A number of parameters have a short form that helps avoid the " "limitations of the kernel command line options and makes entering the " "parameters easier. If a parameter has a short form, it will be listed in " "brackets behind the (normal) long form. Examples in this manual will " "normally use the short form too." msgstr "" #. Tag: term #: boot-installer.xml:2509 #, no-c-format msgid "debconf/priority (priority)" msgstr "" #. Tag: para #: boot-installer.xml:2510 #, no-c-format msgid "This parameter sets the lowest priority of messages to be displayed." msgstr "" #. Tag: para #: boot-installer.xml:2514 #, no-c-format msgid "" "The default installation uses priority=high. This " "means that both high and critical priority messages are shown, but medium " "and low priority messages are skipped. If problems are encountered, the " "installer adjusts the priority as needed." msgstr "" #. Tag: para #: boot-installer.xml:2521 #, no-c-format msgid "" "If you add priority=medium as boot parameter, you " "will be shown the installation menu and gain more control over the " "installation. When priority=low is used, all messages " "are shown (this is equivalent to the expert boot " "method). With priority=critical, the installation " "system will display only critical messages and try to do the right thing " "without fuss." msgstr "" #. Tag: term #: boot-installer.xml:2535 #, no-c-format msgid "DEBIAN_FRONTEND" msgstr "" #. Tag: para #: boot-installer.xml:2536 #, no-c-format msgid "" "This boot parameter controls the type of user interface used for the " "installer. The current possible parameter settings are: " " DEBIAN_FRONTEND=noninteractive DEBIAN_FRONTEND=text " "DEBIAN_FRONTEND=newt DEBIAN_FRONTEND=gtk " " The default frontend is " "DEBIAN_FRONTEND=newt. " "DEBIAN_FRONTEND=text may be preferable for serial " "console installs. Some specialized types of install media may only offer a " "limited selection of frontends, but the newt and " "text frontends are available on most default install " "media. On architectures that support it, the graphical installer uses the " "gtk frontend." msgstr "" #. Tag: term #: boot-installer.xml:2567 #, no-c-format msgid "BOOT_DEBUG" msgstr "" #. Tag: para #: boot-installer.xml:2568 #, no-c-format msgid "" "Setting this boot parameter to 2 will cause the installer's boot process to " "be verbosely logged. Setting it to 3 makes debug shells available at " "strategic points in the boot process. (Exit the shells to continue the boot " "process.)" msgstr "" #. Tag: userinput #: boot-installer.xml:2577 #, no-c-format msgid "BOOT_DEBUG=0" msgstr "" #. Tag: para #: boot-installer.xml:2578 #, no-c-format msgid "This is the default." msgstr "" #. Tag: userinput #: boot-installer.xml:2582 #, no-c-format msgid "BOOT_DEBUG=1" msgstr "" #. Tag: para #: boot-installer.xml:2583 #, no-c-format msgid "More verbose than usual." msgstr "" #. Tag: userinput #: boot-installer.xml:2587 #, no-c-format msgid "BOOT_DEBUG=2" msgstr "" #. Tag: para #: boot-installer.xml:2588 #, no-c-format msgid "Lots of debugging information." msgstr "" #. Tag: userinput #: boot-installer.xml:2592 #, no-c-format msgid "BOOT_DEBUG=3" msgstr "" #. Tag: para #: boot-installer.xml:2593 #, no-c-format msgid "" "Shells are run at various points in the boot process to allow detailed " "debugging. Exit the shell to continue the boot." msgstr "" #. Tag: term #: boot-installer.xml:2607 #, no-c-format msgid "INSTALL_MEDIA_DEV" msgstr "" #. Tag: para #: boot-installer.xml:2608 #, no-c-format msgid "" "The value of the parameter is the path to the device to load the &debian; " "installer from. For example, INSTALL_MEDIA_DEV=/dev/floppy/0" msgstr "" #. Tag: para #: boot-installer.xml:2614 #, no-c-format msgid "" "The boot floppy, which normally scans all floppies it can to find the root " "floppy, can be overridden by this parameter to only look at the one device." msgstr "" #. Tag: term #: boot-installer.xml:2625 #, no-c-format msgid "log_host" msgstr "" #. Tag: term #: boot-installer.xml:2626 #, no-c-format msgid "log_port" msgstr "" #. Tag: para #: boot-installer.xml:2627 #, no-c-format msgid "" "Causes the installer to send log messages to a remote syslog on the " "specified host and port as well as to a local file. If not specified, the " "port defaults to the standard syslog port 514." msgstr "" #. Tag: term #: boot-installer.xml:2638 #, no-c-format msgid "lowmem" msgstr "" #. Tag: para #: boot-installer.xml:2639 #, no-c-format msgid "" "Can be used to force the installer to a lowmem level higher than the one the " "installer sets by default based on available memory. Possible values are 1 " "and 2. See also ." msgstr "" #. Tag: term #: boot-installer.xml:2649 #, no-c-format msgid "noshell" msgstr "" #. Tag: para #: boot-installer.xml:2650 #, no-c-format msgid "" "Prevents the installer from offering interactive shells on tty2 and tty3. " "Useful for unattended installations where physical security is limited." msgstr "" #. Tag: term #: boot-installer.xml:2659 #, no-c-format msgid "debian-installer/framebuffer (fb)" msgstr "" #. Tag: para #: boot-installer.xml:2660 #, no-c-format msgid "" "Some architectures use the kernel framebuffer to offer installation in a " "number of languages. If framebuffer causes a problem on your system you can " "disable the feature using the parameter vga=normal fb=false. Problem symptoms are error " "messages about bterm or bogl, a blank screen, or a freeze within a few " "minutes after starting the install." msgstr "" #. Tag: para #: boot-installer.xml:2669 #, no-c-format msgid "Such problems have been reported on hppa." msgstr "" #. Tag: para #: boot-installer.xml:2673 #, no-c-format msgid "" "Because of display problems on some systems, framebuffer support is " "disabled by default for &arch-title;. This can result " "in ugly display on systems that do properly support the framebuffer, like " "those with ATI graphical cards. If you see display problems in the " "installer, you can try booting with parameter debian-installer/" "framebuffer=true or fb=true for short." msgstr "" #. Tag: term #: boot-installer.xml:2687 #, no-c-format msgid "debian-installer/theme (theme)" msgstr "" #. Tag: para #: boot-installer.xml:2688 #, no-c-format msgid "" "A theme determines how the user interface of the installer looks (colors, " "icons, etc.). What themes are available differs per frontend. Currently both " "the newt and gtk frontends only have a dark theme that was " "designed for visually impaired users. Set the theme by booting with " "theme=dark." msgstr "" #. Tag: term #: boot-installer.xml:2700 boot-installer.xml:2933 #, no-c-format msgid "netcfg/disable_autoconfig" msgstr "" #. Tag: para #: boot-installer.xml:2701 #, no-c-format msgid "" "By default, the &d-i; automatically probes for network configuration via " "IPv6 autoconfiguration and DHCP. If the probe succeeds, you won't have a " "chance to review and change the obtained settings. You can get to the manual " "network setup only in case the automatic configuration fails." msgstr "" #. Tag: para #: boot-installer.xml:2708 #, no-c-format msgid "" "If you have an IPv6 router or a DHCP server on your local network, but want " "to avoid them because e.g. they give wrong answers, you can use the " "parameter netcfg/disable_autoconfig=true to prevent " "any automatic configuration of the network (neither v4 nor v6) and to enter " "the information manually." msgstr "" #. Tag: term #: boot-installer.xml:2719 #, no-c-format msgid "hw-detect/start_pcmcia" msgstr "" #. Tag: para #: boot-installer.xml:2720 #, no-c-format msgid "" "Set to false to prevent starting PCMCIA services, if " "that causes problems. Some laptops are well known for this misbehavior." msgstr "" #. Tag: term #: boot-installer.xml:2730 #, no-c-format msgid "disk-detect/dmraid/enable (dmraid)" msgstr "" #. Tag: para #: boot-installer.xml:2731 #, no-c-format msgid "" "Set to true to enable support for Serial ATA RAID " "(also called ATA RAID, BIOS RAID or fake RAID) disks in the installer. Note " "that this support is currently experimental. Additional information can be " "found on the &debian; Installer Wiki." msgstr "" #. Tag: term #: boot-installer.xml:2742 #, no-c-format msgid "preseed/url (url)" msgstr "" #. Tag: para #: boot-installer.xml:2743 #, no-c-format msgid "" "Specify the url to a preconfiguration file to download and use for " "automating the install. See ." msgstr "" #. Tag: term #: boot-installer.xml:2752 #, no-c-format msgid "preseed/file (file)" msgstr "" #. Tag: para #: boot-installer.xml:2753 #, no-c-format msgid "" "Specify the path to a preconfiguration file to load for automating the " "install. See ." msgstr "" #. Tag: term #: boot-installer.xml:2762 #, no-c-format msgid "preseed/interactive" msgstr "" #. Tag: para #: boot-installer.xml:2763 #, no-c-format msgid "" "Set to true to display questions even if they have " "been preseeded. Can be useful for testing or debugging a preconfiguration " "file. Note that this will have no effect on parameters that are passed as " "boot parameters, but for those a special syntax can be used. See for details." msgstr "" #. Tag: term #: boot-installer.xml:2775 #, no-c-format msgid "auto-install/enable (auto)" msgstr "" #. Tag: para #: boot-installer.xml:2776 #, no-c-format msgid "" "Delay questions that are normally asked before preseeding is possible until " "after the network is configured. See for " "details about using this to automate installs." msgstr "" #. Tag: term #: boot-installer.xml:2787 #, no-c-format msgid "finish-install/keep-consoles" msgstr "" #. Tag: para #: boot-installer.xml:2788 #, no-c-format msgid "" "During installations from serial or management console, the regular virtual " "consoles (VT1 to VT6) are normally disabled in /etc/inittab. Set to true to prevent this." msgstr "" #. Tag: term #: boot-installer.xml:2799 #, no-c-format msgid "cdrom-detect/eject" msgstr "" #. Tag: para #: boot-installer.xml:2800 #, no-c-format msgid "" "By default, before rebooting, &d-i; automatically ejects the optical media " "used during the installation. This can be unnecessary if the system does not " "automatically boot off the CD. In some cases it may even be undesirable, for " "example if the optical drive cannot reinsert the media itself and the user " "is not there to do it manually. Many slot loading, slim-line, and caddy " "style drives cannot reload media automatically." msgstr "" #. Tag: para #: boot-installer.xml:2809 #, no-c-format msgid "" "Set to false to disable automatic ejection, and be " "aware that you may need to ensure that the system does not automatically " "boot from the optical drive after the initial installation." msgstr "" #. Tag: term #: boot-installer.xml:2820 #, no-c-format msgid "base-installer/install-recommends (recommends)" msgstr "" #. Tag: para #: boot-installer.xml:2821 #, no-c-format msgid "" "By setting this option to false, the package " "management system will be configured to not automatically install " "Recommends, both during the installation and for the " "installed system. See also ." msgstr "" #. Tag: para #: boot-installer.xml:2828 #, no-c-format msgid "" "Note that this option allows to have a leaner system, but can also result in " "features being missing that you might normally expect to be available. You " "may have to manually install some of the recommended packages to obtain the " "full functionality you want. This option should therefore only be used by " "very experienced users." msgstr "" #. Tag: term #: boot-installer.xml:2840 #, no-c-format msgid "debian-installer/allow_unauthenticated" msgstr "" #. Tag: para #: boot-installer.xml:2841 #, no-c-format msgid "" "By default the installer requires that repositories be authenticated using a " "known gpg key. Set to true to disable that " "authentication. Warning: insecure, not recommended." msgstr "" #. Tag: term #: boot-installer.xml:2852 #, no-c-format msgid "ramdisk_size" msgstr "" #. Tag: para #: boot-installer.xml:2853 #, no-c-format msgid "" "This parameter should already be set to a correct value where needed; set it " "only it you see errors during the boot that indicate the ramdisk could not " "be loaded completely. The value is in kB." msgstr "" #. Tag: term #: boot-installer.xml:2863 #, no-c-format msgid "rescue/enable" msgstr "" #. Tag: para #: boot-installer.xml:2864 #, no-c-format msgid "" "Set to true to enter rescue mode rather than " "performing a normal installation. See ." msgstr "" #. Tag: title #: boot-installer.xml:2877 #, no-c-format msgid "Using boot parameters to answer questions" msgstr "" #. Tag: para #: boot-installer.xml:2878 #, no-c-format msgid "" "With some exceptions, a value can be set at the boot prompt for any question " "asked during the installation, though this is only really useful in specific " "cases. General instructions how to do this can be found in . Some specific examples are listed below." msgstr "" #. Tag: term #: boot-installer.xml:2890 #, no-c-format msgid "debian-installer/language (language)" msgstr "" #. Tag: term #: boot-installer.xml:2891 #, no-c-format msgid "debian-installer/country (country)" msgstr "" #. Tag: term #: boot-installer.xml:2892 #, no-c-format msgid "debian-installer/locale (locale)" msgstr "" #. Tag: para #: boot-installer.xml:2893 #, no-c-format msgid "" "There are two ways to specify the language, country and locale to use for " "the installation and the installed system." msgstr "" #. Tag: para #: boot-installer.xml:2898 #, no-c-format msgid "" "The first and easiest is to pass only the parameter locale. Language and country will then be derived from its value. You can " "for example use locale=de_CH to select German as " "language and Switzerland as country (de_CH.UTF-8 will be " "set as default locale for the installed system). Limitation is that not all " "possible combinations of language, country and locale can be achieved this " "way." msgstr "" #. Tag: para #: boot-installer.xml:2907 #, no-c-format msgid "" "The second, more flexible option is to specify language " "and country separately. In this case locale can optionally be added to specify a specific default locale for " "the installed system. Example: language=en country=DE " "locale=en_GB.UTF-8." msgstr "" #. Tag: term #: boot-installer.xml:2919 #, no-c-format msgid "anna/choose_modules (modules)" msgstr "" #. Tag: para #: boot-installer.xml:2920 #, no-c-format msgid "" "Can be used to automatically load installer components that are not loaded " "by default. Examples of optional components that may be useful are " "openssh-client-udeb (so you can use scp during the installation) and " "ppp-udeb (see )." msgstr "" #. Tag: para #: boot-installer.xml:2934 #, no-c-format msgid "" "Set to true if you want to disable IPv6 " "autoconfiguration and DHCP and instead force static network configuration." msgstr "" #. Tag: term #: boot-installer.xml:2943 #, no-c-format msgid "mirror/protocol (protocol)" msgstr "" #. Tag: para #: boot-installer.xml:2944 #, no-c-format msgid "" "By default the installer will use the http protocol to download files from " "&debian; mirrors and changing that to ftp is not possible during " "installations at normal priority. By setting this parameter to " "ftp, you can force the installer to use that protocol " "instead. Note that you cannot select an ftp mirror from a list, you have to " "enter the hostname manually." msgstr "" #. Tag: term #: boot-installer.xml:2957 #, no-c-format msgid "tasksel:tasksel/first (tasks)" msgstr "" #. Tag: para #: boot-installer.xml:2958 #, no-c-format msgid "" "Can be used to select tasks that are not available from the interactive task " "list, such as the kde-desktop task. See for additional information." msgstr "" #. Tag: title #: boot-installer.xml:2972 #, no-c-format msgid "Passing parameters to kernel modules" msgstr "" #. Tag: para #: boot-installer.xml:2973 #, no-c-format msgid "" "If drivers are compiled into the kernel, you can pass parameters to them as " "described in the kernel documentation. However, if drivers are compiled as " "modules and because kernel modules are loaded a bit differently during an " "installation than when booting an installed system, it is not possible to " "pass parameters to modules as you would normally do. Instead, you need to " "use a special syntax recognized by the installer which will then make sure " "that the parameters are saved in the proper configuration files and will " "thus be used when the modules are actually loaded. The parameters will also " "be propagated automatically to the configuration for the installed system." msgstr "" #. Tag: para #: boot-installer.xml:2986 #, no-c-format msgid "" "Note that it is now quite rare that parameters need to be passed to modules. " "In most cases the kernel will be able to probe the hardware present in a " "system and set good defaults that way. However, in some situations it may " "still be needed to set parameters manually." msgstr "" #. Tag: para #: boot-installer.xml:2993 #, no-c-format msgid "" "The syntax to use to set parameters for modules is: " "\n" "module_name.parameter_name=value\n" " If you need to pass multiple parameters to the " "same or different modules, just repeat this. For example, to set an old 3Com " "network interface card to use the BNC (coax) connector and IRQ 10, you would " "pass:" msgstr "" #. Tag: screen #: boot-installer.xml:3003 #, no-c-format msgid "3c509.xcvr=3 3c509.irq=10" msgstr "" #. Tag: title #: boot-installer.xml:3009 #, no-c-format msgid "Blacklisting kernel modules" msgstr "" #. Tag: para #: boot-installer.xml:3010 #, no-c-format msgid "" "Sometimes it may be necessary to blacklist a module to prevent it from being " "loaded automatically by the kernel and udev. One reason could be that a " "particular module causes problems with your hardware. The kernel also " "sometimes lists two different drivers for the same device. This can cause " "the device to not work correctly if the drivers conflict or if the wrong " "driver is loaded first." msgstr "" #. Tag: para #: boot-installer.xml:3019 #, no-c-format msgid "" "You can blacklist a module using the following syntax: " "module_name.blacklist=yes. " "This will cause the module to be blacklisted in /etc/modprobe.d/" "blacklist.local both during the installation and for the " "installed system." msgstr "" #. Tag: para #: boot-installer.xml:3027 #, no-c-format msgid "" "Note that a module may still be loaded by the installation system itself. " "You can prevent that from happening by running the installation in expert " "mode and unselecting the module from the list of modules displayed during " "the hardware detection phases." msgstr "" #. Tag: title #: boot-installer.xml:3043 #, no-c-format msgid "Troubleshooting the Installation Process" msgstr "" #. Tag: title #: boot-installer.xml:3048 #, no-c-format msgid "CD-ROM Reliability" msgstr "" #. Tag: para #: boot-installer.xml:3049 #, no-c-format msgid "" "Sometimes, especially with older CD-ROM drives, the installer may fail to " "boot from a CD-ROM. The installer may also — even after booting " "successfully from CD-ROM — fail to recognize the CD-ROM or return " "errors while reading from it during the installation." msgstr "" #. Tag: para #: boot-installer.xml:3056 #, no-c-format msgid "" "There are many different possible causes for these problems. We can only " "list some common issues and provide general suggestions on how to deal with " "them. The rest is up to you." msgstr "" #. Tag: para #: boot-installer.xml:3062 #, no-c-format msgid "There are two very simple things that you should try first." msgstr "" #. Tag: para #: boot-installer.xml:3067 #, no-c-format msgid "" "If the CD-ROM does not boot, check that it was inserted correctly and that " "it is not dirty." msgstr "" #. Tag: para #: boot-installer.xml:3073 #, no-c-format msgid "" "If the installer fails to recognize a CD-ROM, try just running the option " " Detect and mount CD-ROM a second time. Some DMA related issues with very old CD-ROM " "drives are known to be resolved in this way." msgstr "" #. Tag: para #: boot-installer.xml:3083 #, no-c-format msgid "" "If this does not work, then try the suggestions in the subsections below. " "Most, but not all, suggestions discussed there are valid for both CD-ROM and " "DVD, but we'll use the term CD-ROM for simplicity." msgstr "" #. Tag: para #: boot-installer.xml:3089 #, no-c-format msgid "" "If you cannot get the installation working from CD-ROM, try one of the other " "installation methods that are available." msgstr "" #. Tag: title #: boot-installer.xml:3097 #, no-c-format msgid "Common issues" msgstr "" #. Tag: para #: boot-installer.xml:3100 #, no-c-format msgid "" "Some older CD-ROM drives do not support reading from discs that were burned " "at high speeds using a modern CD writer." msgstr "" #. Tag: para #: boot-installer.xml:3117 #, no-c-format msgid "" "Some very old CD-ROM drives do not work correctly if direct memory " "access (DMA) is enabled for them." msgstr "" #. Tag: title #: boot-installer.xml:3128 #, no-c-format msgid "How to investigate and maybe solve issues" msgstr "" #. Tag: para #: boot-installer.xml:3129 #, no-c-format msgid "If the CD-ROM fails to boot, try the suggestions listed below." msgstr "" #. Tag: para #: boot-installer.xml:3134 #, no-c-format msgid "" "Check that your BIOS actually supports booting from CD-ROM (only an issue " "for very old systems) and that CD booting is enabled in the BIOS." msgstr "" #. Tag: para #: boot-installer.xml:3141 #, no-c-format msgid "" "If you downloaded an iso image, check that the md5sum of that image matches " "the one listed for the image in the MD5SUMS file that " "should be present in the same location as where you downloaded the image " "from. \n" "$ md5sum debian-testing-i386-netinst.iso\n" "a20391b12f7ff22ef705cee4059c6b92 debian-testing-i386-netinst." "iso\n" " Next, check that the md5sum of the burned CD-ROM " "matches as well. The following command should work. It uses the size of the " "image to read the correct number of bytes from the CD-ROM." msgstr "" #. Tag: screen #: boot-installer.xml:3154 #, no-c-format msgid "" "$ dd if=/dev/cdrom | \\\n" "> head -c `stat --format=%s debian-testing-i386-netinst.iso` | \\\n" "> md5sum\n" "a20391b12f7ff22ef705cee4059c6b92 -\n" "262668+0 records in\n" "262668+0 records out\n" "134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s" msgstr "" #. Tag: para #: boot-installer.xml:3159 #, no-c-format msgid "" "If, after the installer has been booted successfully, the CD-ROM is not " "detected, sometimes simply trying again may solve the problem. If you have " "more than one CD-ROM drive, try changing the CD-ROM to the other drive. If " "that does not work or if the CD-ROM is recognized but there are errors when " "reading from it, try the suggestions listed below. Some basic knowledge of " "&arch-kernel; is required for this. To execute any of the commands, you " "should first switch to the second virtual console (VT2) and activate the " "shell there." msgstr "" #. Tag: para #: boot-installer.xml:3171 #, no-c-format msgid "" "Switch to VT4 or view the contents of /var/log/syslog " "(use nano as editor) to check for any specific error " "messages. After that, also check the output of dmesg." msgstr "" #. Tag: para #: boot-installer.xml:3178 #, no-c-format msgid "" "Check in the output of dmesg if your CD-ROM drive was " "recognized. You should see something like (the lines do not necessarily have " "to be consecutive): \n" "Probing IDE interface ide1...\n" "hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n" "ide1 at 0x170-0x177,0x376 on irq 15\n" "hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n" "Uniform CD-ROM driver Revision: 3.20\n" " If you don't see something like that, chances " "are the controller your CD-ROM is connected to was not recognized or may be " "not supported at all. If you know what driver is needed for the controller, " "you can try loading it manually using modprobe." msgstr "" #. Tag: para #: boot-installer.xml:3192 #, no-c-format msgid "" "Check that there is a device node for your CD-ROM drive under /dev/" ". In the example above, this would be /dev/hdc. There should also be a /dev/cdrom." msgstr "" #. Tag: para #: boot-installer.xml:3200 #, no-c-format msgid "" "Use the mount command to check if the CD-ROM is already " "mounted; if not, try mounting it manually: \n" "$ mount /dev/hdc /cdrom\n" " Check if there are any error messages after that " "command." msgstr "" #. Tag: para #: boot-installer.xml:3210 #, no-c-format msgid "" "Check if DMA is currently enabled: \n" "$ cd /proc/ide/hdc\n" "$ grep using_dma settings\n" "using_dma 1 0 1 rw\n" " A 1 in the first column after " "using_dma means it is enabled. If it is, try disabling " "it: \n" "$ echo -n \"using_dma:0\" >settings\n" " Make sure that you are in the directory for the " "device that corresponds to your CD-ROM drive." msgstr "" #. Tag: para #: boot-installer.xml:3225 #, no-c-format msgid "" "If there are any problems during the installation, try checking the " "integrity of the CD-ROM using the option near the bottom of the installer's " "main menu. This option can also be used as a general test if the CD-ROM can " "be read reliably." msgstr "" #. Tag: title #: boot-installer.xml:3240 #, no-c-format msgid "Floppy Disk Reliability" msgstr "" #. Tag: para #: boot-installer.xml:3242 #, no-c-format msgid "" "The biggest problem for people using floppy disks to install &debian; seems " "to be floppy disk reliability." msgstr "" #. Tag: para #: boot-installer.xml:3247 #, no-c-format msgid "" "The boot floppy is the floppy with the worst problems, because it is read by " "the hardware directly, before Linux boots. Often, the hardware doesn't read " "as reliably as the Linux floppy disk driver, and may just stop without " "printing an error message if it reads incorrect data. There can also be " "failures in the driver floppies, most of which indicate themselves with a " "flood of messages about disk I/O errors." msgstr "" #. Tag: para #: boot-installer.xml:3256 #, no-c-format msgid "" "If you are having the installation stall at a particular floppy, the first " "thing you should do is write the image to a different " "floppy and see if that solves the problem. Simply reformatting the old " "floppy may not be sufficient, even if it appears that the floppy was " "reformatted and written with no errors. It is sometimes useful to try " "writing the floppy on a different system." msgstr "" #. Tag: para #: boot-installer.xml:3265 #, no-c-format msgid "" "One user reports he had to write the images to floppy three times before one worked, and then everything was fine with the " "third floppy." msgstr "" #. Tag: para #: boot-installer.xml:3271 #, no-c-format msgid "" "Normally you should not have to download a floppy image again, but if you " "are experiencing problems it is always useful to verify that the images were " "downloaded correctly by verifying their md5sums." msgstr "" #. Tag: para #: boot-installer.xml:3277 #, no-c-format msgid "" "Other users have reported that simply rebooting a few times with the same " "floppy in the floppy drive can lead to a successful boot. This is all due to " "buggy hardware or firmware floppy drivers." msgstr "" #. Tag: title #: boot-installer.xml:3286 #, no-c-format msgid "Boot Configuration" msgstr "" #. Tag: para #: boot-installer.xml:3288 #, no-c-format msgid "" "If you have problems and the kernel hangs during the boot process, doesn't " "recognize peripherals you actually have, or drives are not recognized " "properly, the first thing to check is the boot parameters, as discussed in " "." msgstr "" #. Tag: para #: boot-installer.xml:3297 #, no-c-format msgid "" "In some cases, malfunctions can be caused by missing device firmware (see " " and )." msgstr "" #. Tag: para #: boot-installer.xml:3308 #, no-c-format msgid "" "If software speech synthesis does not work, there is most probably an issue " "with your sound board, usually because either the driver for it is not " "included in the installer, or because it has unusual mixer level names which " "are set to muted by default. You should thus submit a bug report which " "includes the output of the following commands, run on the same machine from " "a Linux system which is known to have sound working (e.g., a live CD)." msgstr "" #. Tag: userinput #: boot-installer.xml:3319 #, no-c-format msgid "dmesg" msgstr "" #. Tag: userinput #: boot-installer.xml:3321 #, no-c-format msgid "lspci" msgstr "" #. Tag: userinput #: boot-installer.xml:3323 #, no-c-format msgid "lsmod" msgstr "" #. Tag: userinput #: boot-installer.xml:3325 #, no-c-format msgid "amixer" msgstr "" #. Tag: title #: boot-installer.xml:3333 boot-installer.xml:3444 #, no-c-format msgid "Common &arch-title; Installation Problems" msgstr "" #. Tag: para #: boot-installer.xml:3334 #, no-c-format msgid "" "There are some common installation problems that can be solved or avoided by " "passing certain boot parameters to the installer." msgstr "" #. Tag: para #: boot-installer.xml:3385 #, no-c-format msgid "" "If your screen begins to show a weird picture while the kernel boots, eg. " "pure white, pure black or colored pixel garbage, your system may contain a " "problematic video card which does not switch to the framebuffer mode " "properly. Then you can use the boot parameter fb=false to disable the framebuffer console. Only a reduced set of " "languages will be available during the installation due to limited console " "features. See for details." msgstr "" #. Tag: title #: boot-installer.xml:3399 #, no-c-format msgid "System Freeze During the PCMCIA Configuration Phase" msgstr "" #. Tag: para #: boot-installer.xml:3400 #, no-c-format msgid "" "Some very old laptop models produced by Dell are known to crash when PCMCIA " "device detection tries to access some hardware addresses. Other laptops may " "display similar problems. If you experience such a problem and you don't " "need PCMCIA support during the installation, you can disable PCMCIA using " "the hw-detect/start_pcmcia=false boot parameter. You " "can then configure PCMCIA after the installation is completed and exclude " "the resource range causing the problems." msgstr "" #. Tag: para #: boot-installer.xml:3410 #, no-c-format msgid "" "Alternatively, you can boot the installer in expert mode. You will then be " "asked to enter the resource range options your hardware needs. For example, " "if you have one of the Dell laptops mentioned above, you should enter " "exclude port 0x800-0x8ff here. There is also a list " "of some common resource range options in the System resource " "settings section of the PCMCIA HOWTO. Note that you have to omit the " "commas, if any, when you enter this value in the installer." msgstr "" #. Tag: para #: boot-installer.xml:3445 #, no-c-format msgid "There are some common installation problems that are worth mentioning." msgstr "" #. Tag: title #: boot-installer.xml:3451 #, no-c-format msgid "Misdirected video output" msgstr "" #. Tag: para #: boot-installer.xml:3452 #, no-c-format msgid "" "It is fairly common for &arch-title; to have two video cards in one machine, " "for example an ATI card and a Sun Creator 3D. In some cases, this may result " "in the video output getting misdirected soon after the system boots. In " "typical cases, the display will only show: \n" "Remapping the kernel... done\n" "Booting Linux...\n" " To work around this, you can either pull out one " "of the video cards, or disable the one not used during the OpenProm boot " "phase using a kernel parameter. For example, to disable an ATI card, you " "should boot the installer with video=atyfb:off." msgstr "" #. Tag: para #: boot-installer.xml:3466 #, no-c-format msgid "" "Note that you may also have to manually add this parameter to the silo " "configuration (edit /target/etc/silo.conf before " "rebooting) and, if you installed X11, modify the video driver in /" "etc/X11/xorg.conf." msgstr "" #. Tag: title #: boot-installer.xml:3477 #, no-c-format msgid "Failure to Boot or Install from CD-ROM" msgstr "" #. Tag: para #: boot-installer.xml:3478 #, no-c-format msgid "" "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if " "they do boot, there may be inexplicable failures during the installation. " "Most problems have been reported with SunBlade systems." msgstr "" #. Tag: para #: boot-installer.xml:3484 #, no-c-format msgid "We recommend to install such systems by netbooting the installer." msgstr "" #. Tag: title #: boot-installer.xml:3493 #, no-c-format msgid "Interpreting the Kernel Startup Messages" msgstr "" #. Tag: para #: boot-installer.xml:3495 #, no-c-format msgid "" "During the boot sequence, you may see many messages in the form " "can't find something, or something not " "present, can't initialize " "something, or even " "this driver release depends on something. Most of these messages are harmless. You see " "them because the kernel for the installation system is built to run on " "computers with many different peripheral devices. Obviously, no one computer " "will have every possible peripheral device, so the operating system may emit " "a few complaints while it looks for peripherals you don't own. You may also " "see the system pause for a while. This happens when it is waiting for a " "device to respond, and that device is not present on your system. If you " "find the time it takes to boot the system unacceptably long, you can create " "a custom kernel later (see )." msgstr "" #. Tag: title #: boot-installer.xml:3520 #, no-c-format msgid "Reporting Installation Problems" msgstr "" #. Tag: para #: boot-installer.xml:3521 #, no-c-format msgid "" "If you get through the initial boot phase but cannot complete the install, " "the menu option Save debug logs may be helpful. " "It lets you store system error logs and configuration information from the " "installer to a floppy, or download them using a web browser. This " "information may provide clues as to what went wrong and how to fix it. If " "you are submitting a bug report, you may want to attach this information to " "the bug report." msgstr "" #. Tag: para #: boot-installer.xml:3532 #, no-c-format msgid "" "Other pertinent installation messages may be found in /var/log/ during the installation, and /var/log/installer/ after the computer has been booted into the installed system." msgstr "" #. Tag: title #: boot-installer.xml:3543 #, no-c-format msgid "Submitting Installation Reports" msgstr "" #. Tag: para #: boot-installer.xml:3544 #, no-c-format msgid "" "If you still have problems, please submit an installation report. We also " "encourage installation reports to be sent even if the installation is " "successful, so that we can get as much information as possible on the " "largest number of hardware configurations." msgstr "" #. Tag: para #: boot-installer.xml:3551 #, no-c-format msgid "" "Note that your installation report will be published in the Debian Bug " "Tracking System (BTS) and forwarded to a public mailing list. Make sure that " "you use an e-mail address that you do not mind being made public." msgstr "" #. Tag: para #: boot-installer.xml:3557 #, no-c-format msgid "" "If you have a working &debian; system, the easiest way to send an " "installation report is to install the installation-report and reportbug packages (aptitude " "install installation-report reportbug), configure " "reportbug as explained in , and run the command reportbug installation-reports." msgstr "" #. Tag: para #: boot-installer.xml:3567 #, no-c-format msgid "" "Alternatively you can use this template when filling out installation " "reports, and file the report as a bug report against the " "installation-reports pseudo package, by sending it to " "submit@bugs.debian.org. \n" "Package: installation-reports\n" "\n" "Boot method: <How did you boot the installer? CD? floppy? network?>\n" "Image version: <Full URL to image you downloaded is best>\n" "Date: <Date and time of the install>\n" "\n" "Machine: <Description of machine (eg, IBM Thinkpad R32)>\n" "Processor:\n" "Memory:\n" "Partitions: <df -Tl will do; the raw partition table is preferred>\n" "\n" "Output of lspci -knn (or lspci -nn):\n" "\n" "Base System Installation Checklist:\n" "[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n" "\n" "Initial boot: [ ]\n" "Detect network card: [ ]\n" "Configure network: [ ]\n" "Detect CD: [ ]\n" "Load installer modules: [ ]\n" "Detect hard drives: [ ]\n" "Partition hard drives: [ ]\n" "Install base system: [ ]\n" "Clock/timezone setup: [ ]\n" "User/password setup: [ ]\n" "Install tasks: [ ]\n" "Install boot loader: [ ]\n" "Overall install: [ ]\n" "\n" "Comments/Problems:\n" "\n" "<Description of the install, in prose, and any thoughts, comments\n" " and ideas you had during the initial install.>\n" " In the bug report, describe what the problem is, " "including the last visible kernel messages in the event of a kernel hang. " "Describe the steps that you did which brought the system into the problem " "state." msgstr ""