# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2006-01-03 19:55+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-xml2pot; charset=UTF-8\n"
"Content-Transfer-Encoding: ENCODING\n"

#: random-bits.xml:4
#, no-c-format
#. Tag: title
msgid "Random Bits"
msgstr ""

#: random-bits.xml:11
#, no-c-format
#. Tag: title
msgid "Linux Devices"
msgstr ""

#: random-bits.xml:12
#, no-c-format
#. Tag: para
msgid "In Linux you have various special files in <filename>/dev</filename>. These files are called device files. In the Unix world accessing hardware is different. There you have a special file which actually runs a driver which in turn accesses the hardware. The device file is an interface to the actual system component. Files under <filename>/dev</filename> also behave differently than ordinary files. Below are the most important device files listed."
msgstr ""

#: random-bits.xml:27
#, no-c-format
#. Tag: filename
msgid "<filename>fd0</filename>"
msgstr ""

#: random-bits.xml:28
#, no-c-format
#. Tag: entry
msgid "First Floppy Drive"
msgstr ""

#: random-bits.xml:30
#, no-c-format
#. Tag: filename
msgid "<filename>fd1</filename>"
msgstr ""

#: random-bits.xml:31
#, no-c-format
#. Tag: entry
msgid "Second Floppy Drive"
msgstr ""

#: random-bits.xml:37
#, no-c-format
#. Tag: filename
msgid "<filename>hda</filename>"
msgstr ""

#: random-bits.xml:38
#, no-c-format
#. Tag: entry
msgid "IDE Hard disk / CD-ROM on the first IDE port (Master)"
msgstr ""

#: random-bits.xml:40
#, no-c-format
#. Tag: filename
msgid "<filename>hdb</filename>"
msgstr ""

#: random-bits.xml:41
#, no-c-format
#. Tag: entry
msgid "IDE Hard disk / CD-ROM on the first IDE port (Slave)"
msgstr ""

#: random-bits.xml:43
#, no-c-format
#. Tag: filename
msgid "<filename>hdc</filename>"
msgstr ""

#: random-bits.xml:44
#, no-c-format
#. Tag: entry
msgid "IDE Hard disk / CD-ROM on the second IDE port (Master)"
msgstr ""

#: random-bits.xml:46
#, no-c-format
#. Tag: filename
msgid "<filename>hdd</filename>"
msgstr ""

#: random-bits.xml:47
#, no-c-format
#. Tag: entry
msgid "IDE Hard disk / CD-ROM on the second IDE port (Slave)"
msgstr ""

#: random-bits.xml:49
#, no-c-format
#. Tag: filename
msgid "hda1"
msgstr ""

#: random-bits.xml:50
#, no-c-format
#. Tag: entry
msgid "First partition of the first IDE hard disk"
msgstr ""

#: random-bits.xml:52
#, no-c-format
#. Tag: filename
msgid "hdd15"
msgstr ""

#: random-bits.xml:53
#, no-c-format
#. Tag: entry
msgid "Fifteenth partition of the fourth IDE hard disk"
msgstr ""

#: random-bits.xml:59
#, no-c-format
#. Tag: filename
msgid "<filename>sda</filename>"
msgstr ""

#: random-bits.xml:60
#, no-c-format
#. Tag: entry
msgid "SCSI Hard disk with lowest SCSI ID (e.g. 0)"
msgstr ""

#: random-bits.xml:62
#, no-c-format
#. Tag: filename
msgid "<filename>sdb</filename>"
msgstr ""

#: random-bits.xml:63
#, no-c-format
#. Tag: entry
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 1)"
msgstr ""

#: random-bits.xml:65
#, no-c-format
#. Tag: filename
msgid "<filename>sdc</filename>"
msgstr ""

#: random-bits.xml:66
#, no-c-format
#. Tag: entry
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 2)"
msgstr ""

#: random-bits.xml:68
#, no-c-format
#. Tag: filename
msgid "sda1"
msgstr ""

#: random-bits.xml:69
#, no-c-format
#. Tag: entry
msgid "First partition of the first SCSI hard disk"
msgstr ""

#: random-bits.xml:71
#, no-c-format
#. Tag: filename
msgid "sdd10"
msgstr ""

#: random-bits.xml:72
#, no-c-format
#. Tag: entry
msgid "Tenth partition of the fourth SCSI hard disk"
msgstr ""

#: random-bits.xml:78
#, no-c-format
#. Tag: filename
msgid "<filename>sr0</filename>"
msgstr ""

#: random-bits.xml:79
#, no-c-format
#. Tag: entry
msgid "SCSI CD-ROM with the lowest SCSI ID"
msgstr ""

#: random-bits.xml:81
#, no-c-format
#. Tag: filename
msgid "<filename>sr1</filename>"
msgstr ""

#: random-bits.xml:82
#, no-c-format
#. Tag: entry
msgid "SCSI CD-ROM with the next higher SCSI ID"
msgstr ""

#: random-bits.xml:88
#, no-c-format
#. Tag: filename
msgid "ttyS0"
msgstr ""

#: random-bits.xml:89
#, no-c-format
#. Tag: entry
msgid "Serial port 0, COM1 under MS-DOS"
msgstr ""

#: random-bits.xml:91
#, no-c-format
#. Tag: filename
msgid "ttyS1"
msgstr ""

#: random-bits.xml:92
#, no-c-format
#. Tag: entry
msgid "Serial port 1, COM2 under MS-DOS"
msgstr ""

#: random-bits.xml:94
#, no-c-format
#. Tag: filename
msgid "psaux"
msgstr ""

#: random-bits.xml:95
#, no-c-format
#. Tag: entry
msgid "PS/2 mouse device"
msgstr ""

#: random-bits.xml:97
#, no-c-format
#. Tag: filename
msgid "gpmdata"
msgstr ""

#: random-bits.xml:98
#, no-c-format
#. Tag: entry
msgid "Pseudo device, repeater data from GPM (mouse) daemon"
msgstr ""

#: random-bits.xml:104
#, no-c-format
#. Tag: filename
msgid "cdrom"
msgstr ""

#: random-bits.xml:105
#, no-c-format
#. Tag: entry
msgid "Symbolic link to the CD-ROM drive"
msgstr ""

#: random-bits.xml:107
#, no-c-format
#. Tag: filename
msgid "mouse"
msgstr ""

#: random-bits.xml:108
#, no-c-format
#. Tag: entry
msgid "Symbolic link to the mouse device file"
msgstr ""

#: random-bits.xml:114
#, no-c-format
#. Tag: filename
msgid "null"
msgstr ""

#: random-bits.xml:115
#, no-c-format
#. Tag: entry
msgid "Everything pointed to this device will disappear"
msgstr ""

#: random-bits.xml:117
#, no-c-format
#. Tag: filename
msgid "zero"
msgstr ""

#: random-bits.xml:118
#, no-c-format
#. Tag: entry
msgid "One can endlessly read zeros out of this device"
msgstr ""

#: random-bits.xml:125
#, no-c-format
#. Tag: title
msgid "Setting Up Your Mouse"
msgstr ""

#: random-bits.xml:127
#, no-c-format
#. Tag: para
msgid ""
      "The mouse can be used in both the Linux console (with gpm) and the X window environment. The two uses can be made compatible if the gpm repeater is used to allow the signal to flow to the X server as shown: <informalexample><screen>\n"
      "mouse =&gt; /dev/psaux  =&gt; gpm =&gt; /dev/gpmdata -&gt; /dev/mouse =&gt; X\n"
      "         /dev/ttyS0             (repeater)        (symlink)\n"
      "         /dev/ttyS1\n"
      "</screen></informalexample> Set the repeater protocol to be raw (in <filename>/etc/gpm.conf</filename>) while setting X to the original mouse protocol in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/XF86Config-4</filename>."
msgstr ""

#: random-bits.xml:139
#, no-c-format
#. Tag: para
msgid ""
      "This approach to use gpm even in X has advantages when the mouse is unplugged inadvertently. Simply restarting gpm with <informalexample><screen>\n"
      "# /etc/init.d/gpm restart\n"
      "</screen></informalexample> will re-connect the mouse in software without restarting X."
msgstr ""

#: random-bits.xml:148
#, no-c-format
#. Tag: para
msgid "If gpm is disabled or not installed with some reason, make sure to set X to read directly from the mouse device such as /dev/psaux. For details, refer to the 3-Button Mouse mini-Howto at <filename>/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, <filename>/usr/share/doc/gpm/FAQ.gz</filename>, and <ulink url=\"&url-xfree86;current/mouse.html\">README.mouse</ulink>."
msgstr ""

#: random-bits.xml:158
#, no-c-format
#. Tag: para
msgid "For PowerPC, in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/XF86Config-4</filename>, set the mouse device to <userinput>\"/dev/input/mice\"</userinput>."
msgstr ""

#: random-bits.xml:164
#, no-c-format
#. Tag: para
msgid "Modern kernels give you the capability to emulate a three-button mouse when your mouse only has one button. Just add the following lines to <filename>/etc/sysctl.conf</filename> file."
msgstr ""

#: random-bits.xml:170
#, no-c-format
#. Tag: screen
msgid ""
      "# 3-button mouse emulation\n"
      "# turn on emulation\n"
      "/dev/mac_hid/mouse_button_emulation = 1\n"
      "# Send middle mouse button signal with the F11 key\n"
      "/dev/mac_hid/mouse_button2_keycode = 87\n"
      "# Send right mouse button signal with the F12 key\n"
      "/dev/mac_hid/mouse_button3_keycode = 88\n"
      "# For different keys, use showkey to tell you what the code is."
msgstr ""

#: random-bits.xml:177
#, no-c-format
#. Tag: title
msgid "Disk Space Needed for Tasks"
msgstr ""

#: random-bits.xml:189
#, no-c-format
#. Tag: para
msgid "The base installation for i386 using the default 2.4 kernel, including all standard packages, requires 573MB of disk space."
msgstr ""

#: random-bits.xml:194
#, no-c-format
#. Tag: para
msgid "The following table lists sizes reported by aptitude for the tasks listed in tasksel. Note that some tasks have overlapping constituents, so the total installed size for two tasks together may be less than the total obtained by adding up the numbers."
msgstr ""

#: random-bits.xml:201
#, no-c-format
#. Tag: para
msgid "Note that you will need to add the sizes listed in the table to the size of the base installation when determining the size of partitions. Most of the size listed as <quote>Installed size</quote> will end up in <filename>/usr</filename>; the size listed as <quote>Download size</quote> is (temporarily) required in <filename>/var</filename>."
msgstr ""

#: random-bits.xml:214
#, no-c-format
#. Tag: entry
msgid "Task"
msgstr ""

#: random-bits.xml:215
#, no-c-format
#. Tag: entry
msgid "Installed size (MB)"
msgstr ""

#: random-bits.xml:216
#, no-c-format
#. Tag: entry
msgid "Download size (MB)"
msgstr ""

#: random-bits.xml:217
#, no-c-format
#. Tag: entry
msgid "Space needed to install (MB)"
msgstr ""

#: random-bits.xml:223
#, no-c-format
#. Tag: entry
msgid "Desktop"
msgstr ""

#: random-bits.xml:224
#, no-c-format
#. Tag: entry
msgid "1392"
msgstr ""

#: random-bits.xml:225
#, no-c-format
#. Tag: entry
msgid "<entry>460</entry>"
msgstr ""

#: random-bits.xml:226
#, no-c-format
#. Tag: entry
msgid "1852"
msgstr ""

#: random-bits.xml:230
#, no-c-format
#. Tag: entry
msgid "Web server"
msgstr ""

#: random-bits.xml:231
#, no-c-format
#. Tag: entry
msgid "<entry>36</entry>"
msgstr ""

#: random-bits.xml:232
#, no-c-format
#. Tag: entry
msgid "<entry>12</entry>"
msgstr ""

#: random-bits.xml:233
#, no-c-format
#. Tag: entry
msgid "<entry>48</entry>"
msgstr ""

#: random-bits.xml:237
#, no-c-format
#. Tag: entry
msgid "Print server"
msgstr ""

#: random-bits.xml:238
#, no-c-format
#. Tag: entry
msgid "<entry>168</entry>"
msgstr ""

#: random-bits.xml:239
#, no-c-format
#. Tag: entry
msgid "<entry>58</entry>"
msgstr ""

#: random-bits.xml:240
#, no-c-format
#. Tag: entry
msgid "<entry>226</entry>"
msgstr ""

#: random-bits.xml:244
#, no-c-format
#. Tag: entry
msgid "DNS server"
msgstr ""

#: random-bits.xml:245
#, no-c-format
#. Tag: entry
msgid "<entry>2</entry>"
msgstr ""

#: random-bits.xml:246
#, no-c-format
#. Tag: entry
msgid "<entry>1</entry>"
msgstr ""

#: random-bits.xml:247 random-bits.xml:260
#, no-c-format
#. Tag: entry
msgid "<entry>3</entry>"
msgstr ""

#: random-bits.xml:251
#, no-c-format
#. Tag: entry
msgid "File server"
msgstr ""

#: random-bits.xml:252
#, no-c-format
#. Tag: entry
msgid "<entry>47</entry>"
msgstr ""

#: random-bits.xml:253
#, no-c-format
#. Tag: entry
msgid "<entry>24</entry>"
msgstr ""

#: random-bits.xml:254
#, no-c-format
#. Tag: entry
msgid "<entry>71</entry>"
msgstr ""

#: random-bits.xml:258
#, no-c-format
#. Tag: entry
msgid "Mail server"
msgstr ""

#: random-bits.xml:259
#, no-c-format
#. Tag: entry
msgid "<entry>10</entry>"
msgstr ""

#: random-bits.xml:261
#, no-c-format
#. Tag: entry
msgid "<entry>13</entry>"
msgstr ""

#: random-bits.xml:265
#, no-c-format
#. Tag: entry
msgid "SQL database"
msgstr ""

#: random-bits.xml:266
#, no-c-format
#. Tag: entry
msgid "<entry>66</entry>"
msgstr ""

#: random-bits.xml:267
#, no-c-format
#. Tag: entry
msgid "<entry>21</entry>"
msgstr ""

#: random-bits.xml:268
#, no-c-format
#. Tag: entry
msgid "<entry>87</entry>"
msgstr ""

#: random-bits.xml:274
#, no-c-format
#. Tag: para
msgid "The <emphasis>Desktop</emphasis> task will install both the Gnome and KDE desktop environments."
msgstr ""

#: random-bits.xml:281
#, no-c-format
#. Tag: para
msgid "If you install in a language other than English, <command>tasksel</command> may automatically install a <firstterm>localization task</firstterm>, if one is available for your language. Space requirements differ per language; you should allow up to 200MB in total for download and installation."
msgstr ""

#: random-bits.xml:296
#, no-c-format
#. Tag: title
msgid "Installing &debian; from a Unix/Linux System"
msgstr ""

#: random-bits.xml:298
#, no-c-format
#. Tag: para
msgid "This section explains how to install &debian; from an existing Unix or Linux system, without using the menu-driven installer as explained in the rest of the manual. This <quote>cross-install</quote> HOWTO has been requested by users switching to &debian; from Red Hat, Mandrake, and SUSE. In this section some familiarity with entering *nix commands and navigating the file system is assumed. In this section, <prompt>$</prompt> symbolizes a command to be entered in the user's current system, while <prompt>#</prompt> refers to a command entered in the Debian chroot."
msgstr ""

#: random-bits.xml:310
#, no-c-format
#. Tag: para
msgid "Once you've got the new Debian system configured to your preference, you can migrate your existing user data (if any) to it, and keep on rolling. This is therefore a <quote>zero downtime</quote> &debian; install. It's also a clever way for dealing with hardware that otherwise doesn't play friendly with various boot or installation media."
msgstr ""

#: random-bits.xml:322
#, no-c-format
#. Tag: title
msgid "Getting Started"
msgstr ""

#: random-bits.xml:323
#, no-c-format
#. Tag: para
msgid "With your current *nix partitioning tools, repartition the hard drive as needed, creating at least one filesystem plus swap. You need at least 150MB of space available for a console only install, or at least 300MB if you plan to install X."
msgstr ""

#: random-bits.xml:330
#, no-c-format
#. Tag: para
msgid ""
      "To create file systems on your partitions. For example, to create an ext3 file system on partition <filename>/dev/hda6</filename> (that's our example root partition): <informalexample><screen>\n"
      "# mke2fs -j /dev/hda6\n"
      "</screen></informalexample> To create an ext2 file system instead, omit <userinput>-j</userinput>."
msgstr ""

#: random-bits.xml:340
#, no-c-format
#. Tag: para
msgid ""
      "Initialize and activate swap (substitute the partition number for your intended Debian swap partition): <informalexample><screen>\n"
      "# mkswap /dev/hda5\n"
      "# sync; sync; sync\n"
      "# swapon /dev/hda5\n"
      "</screen></informalexample> Mount one partition as <filename>/mnt/debinst</filename> (the installation point, to be the root (<filename>/</filename>) filesystem on your new system). The mount point name is strictly arbitrary, it is referenced later below."
msgstr ""

#: random-bits.xml:352
#, no-c-format
#. Tag: screen
msgid ""
      "# mkdir /mnt/debinst\n"
      "# mount /dev/hda6 /mnt/debinst"
msgstr ""

#: random-bits.xml:355
#, no-c-format
#. Tag: para
msgid "If you want to have parts of the filesystem (e.g. /usr) mounted on separate partitions, you will need to create and mount these directories manually before proceding with the next stage."
msgstr ""

#: random-bits.xml:365
#, no-c-format
#. Tag: title
msgid "Install <command>debootstrap</command>"
msgstr ""

#: random-bits.xml:366
#, no-c-format
#. Tag: para
msgid "The tool that the Debian installer uses, which is recognized as the official way to install a Debian base system, is <command>debootstrap</command>. It uses <command>wget</command> and <command>ar</command>, but otherwise depends only on <classname>/bin/sh</classname>. Install <command>wget</command> and <command>ar</command> if they aren't already on your current system, then download and install <command>debootstrap</command>."
msgstr ""

#: random-bits.xml:376
#, no-c-format
#. Tag: para
msgid "If you have an rpm-based system, you can use alien to convert the .deb into .rpm, or download an rpm-ized version at <ulink url=\"http://people.debian.org/~blade/install/debootstrap\"></ulink>"
msgstr ""

#: random-bits.xml:382
#, no-c-format
#. Tag: para
msgid ""
      "Or, you can use the following procedure to install it manually. Make a work folder for extracting the .deb into: <informalexample><screen>\n"
      "# mkdir work\n"
      "# cd work\n"
      "</screen></informalexample> The <command>debootstrap</command> binary is located in the Debian archive (be sure to select the proper file for your architecture). Download the <command>debootstrap</command> .deb from the <ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</ulink>, copy the package to the work folder, and extract the binary files from it. You will need to have root privileges to install the binaries."
msgstr ""

#: random-bits.xml:397
#, no-c-format
#. Tag: screen
msgid ""
      "# ar -x debootstrap_0.X.X_arch.deb\n"
      "# cd /\n"
      "# zcat /full-path-to-work/work/data.tar.gz | tar xv"
msgstr ""

#: random-bits.xml:399
#, no-c-format
#. Tag: para
msgid "Note that running <command>debootstrap</command> may require you to have a minimal version of <classname>glibc</classname> installed (currently GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but it calls various utilities that require <classname>glibc</classname>."
msgstr ""

#: random-bits.xml:410
#, no-c-format
#. Tag: title
msgid "Run <command>debootstrap</command>"
msgstr ""

#: random-bits.xml:411
#, no-c-format
#. Tag: para
msgid "<command>debootstrap</command> can download the needed files directly from the archive when you run it. You can substitute any Debian archive mirror for <userinput>http.us.debian.org/debian</userinput> in the command example below, preferably a mirror close to you network-wise. Mirrors are listed at <ulink url=\"http://www.debian.org/misc/README.mirrors\"></ulink>."
msgstr ""

#: random-bits.xml:420
#, no-c-format
#. Tag: para
msgid "If you have a &releasename; &debian; CD mounted at <filename>/cdrom</filename>, you could substitute a file URL instead of the http URL: <userinput>file:/cdrom/debian/</userinput>"
msgstr ""

#: random-bits.xml:426
#, no-c-format
#. Tag: para
msgid "Substitute one of the following for <replaceable>ARCH</replaceable> in the <command>debootstrap</command> command: <userinput>alpha</userinput>, <userinput>arm</userinput>, <userinput>hppa</userinput>, <userinput>i386</userinput>, <userinput>ia64</userinput>, <userinput>m68k</userinput>, <userinput>mips</userinput>, <userinput>mipsel</userinput>, <userinput>powerpc</userinput>, <userinput>s390</userinput>, or <userinput>sparc</userinput>."
msgstr ""

#: random-bits.xml:443
#, no-c-format
#. Tag: screen
msgid ""
      "# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
      "     /mnt/debinst http://http.us.debian.org/debian"
msgstr ""

#: random-bits.xml:449
#, no-c-format
#. Tag: title
msgid "Configure The Base System"
msgstr ""

#: random-bits.xml:450
#, no-c-format
#. Tag: para
msgid "Now you've got a real Debian system, though rather lean, on disk. <command>Chroot</command> into it:"
msgstr ""

#: random-bits.xml:455
#, no-c-format
#. Tag: screen
msgid "# LANG= chroot /mnt/debinst /bin/bash"
msgstr ""

#: random-bits.xml:460
#, no-c-format
#. Tag: title
msgid "Mount Partitions"
msgstr ""

#: random-bits.xml:461
#, no-c-format
#. Tag: para
msgid ""
      "You need to create <filename>/etc/fstab</filename>. <informalexample><screen>\n"
      "# editor /etc/fstab\n"
      "</screen></informalexample> Here is a sample you can modify to suit: <informalexample><screen>\n"
      "# /etc/fstab: static file system information.\n"
      "#\n"
      "# file system    mount point   type    options                  dump pass\n"
      "/dev/XXX         /             ext3    defaults                 0    1\n"
      "/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
      "\n"
      "/dev/XXX         none          swap    sw                       0    0\n"
      "proc             /proc         proc    defaults                 0    0\n"
      "\n"
      "/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0\n"
      "/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0\n"
      "\n"
      "/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
      "/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
      "/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
      "/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
      "</screen></informalexample> Use <userinput>mount -a</userinput> to mount all the file systems you have specified in your <filename>/etc/fstab</filename>, or to mount file systems individually use: <informalexample><screen>\n"
      "# mount /path   # e.g.: mount /usr\n"
      "</screen></informalexample> You can mount the proc file system multiple times and to arbitrary locations, though <filename>/proc</filename> is customary. If you didn't use <userinput>mount -a</userinput>, be sure to mount proc before continuing:"
msgstr ""

#: random-bits.xml:481
#, no-c-format
#. Tag: screen
msgid "# mount -t proc proc /proc"
msgstr ""

#: random-bits.xml:483
#, no-c-format
#. Tag: para
msgid "The command <userinput>ls /proc</userinput> should now show a non-empty directory. Should this fail, you may be able to mount proc from outside the chroot:"
msgstr ""

#: random-bits.xml:489
#, no-c-format
#. Tag: screen
msgid "# mount -t proc proc /mnt/debinst/proc"
msgstr ""

#: random-bits.xml:495
#, no-c-format
#. Tag: title
msgid "Configure Keyboard"
msgstr ""

#: random-bits.xml:496
#, no-c-format
#. Tag: para
msgid "To configure your keyboard:"
msgstr ""

#: random-bits.xml:500
#, no-c-format
#. Tag: screen
msgid "# dpkg-reconfigure console-data"
msgstr ""

#: random-bits.xml:502
#, no-c-format
#. Tag: para
msgid "Note that the keyboard cannot be set while in the chroot, but will be configured for the next reboot."
msgstr ""

#: random-bits.xml:511
#, no-c-format
#. Tag: title
msgid "Configure Networking"
msgstr ""

#: random-bits.xml:512
#, no-c-format
#. Tag: para
msgid ""
      "To configure networking, edit <filename>/etc/network/interfaces</filename>, <filename>/etc/resolv.conf</filename>, and <filename>/etc/hostname</filename>. <informalexample><screen>\n"
      "# editor /etc/network/interfaces\n"
      "</screen></informalexample> Here are some simple examples from <filename>/usr/share/doc/ifupdown/examples</filename>: <informalexample><screen>\n"
      "######################################################################\n"
      "# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n"
      "# See the interfaces(5) manpage for information on what options are\n"
      "# available.\n"
      "######################################################################\n"
      "\n"
      "# We always want the loopback interface.\n"
      "#\n"
      "auto lo\n"
      "iface lo inet loopback\n"
      "\n"
      "# To use dhcp:\n"
      "#\n"
      "# auto eth0\n"
      "# iface eth0 inet dhcp\n"
      "\n"
      "# An example static IP setup: (broadcast and gateway are optional)\n"
      "#\n"
      "# auto eth0\n"
      "# iface eth0 inet static\n"
      "#     address 192.168.0.42\n"
      "#     network 192.168.0.0\n"
      "#     netmask 255.255.255.0\n"
      "#     broadcast 192.168.0.255\n"
      "#     gateway 192.168.0.1\n"
      "</screen></informalexample> Enter your nameserver(s) and search directives in <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n"
      "# editor /etc/resolv.conf\n"
      "</screen></informalexample> A simple <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n"
      "search hqdom.local\\000\n"
      "nameserver 10.1.1.36\n"
      "nameserver 192.168.9.100\n"
      "</screen></informalexample> Enter your system's host name (2 to 63 characters): <informalexample><screen>\n"
      "# echo DebianHostName &gt; /etc/hostname\n"
      "</screen></informalexample> If you have multiple network cards, you should arrange the names of driver modules in the <filename>/etc/modules</filename> file into the desired order. Then during boot, each card will be associated with the interface name (eth0, eth1, etc.) that you expect."
msgstr ""

#: random-bits.xml:548
#, no-c-format
#. Tag: title
msgid "Configure Locales"
msgstr ""

#: random-bits.xml:549
#, no-c-format
#. Tag: para
msgid ""
      "To configure your locale settings to use a language other than English, install the locales support package and configure it: <informalexample><screen>\n"
      "# apt-get install locales\n"
      "# dpkg-reconfigure locales\n"
      "</screen></informalexample> NOTE: Apt must be configured beforehand by creating a sources.list and running apt-get update. Before using locales with character sets other than ASCII or latin1, please consult the appropriate localization HOWTO."
msgstr ""

#: random-bits.xml:566
#, no-c-format
#. Tag: title
msgid "Install a Kernel"
msgstr ""

#: random-bits.xml:567
#, no-c-format
#. Tag: para
msgid ""
      "If you intend to boot this system, you probably want a Linux kernel and a boot loader. Identify available pre-packaged kernels with <informalexample><screen>\n"
      "# apt-cache search kernel-image\n"
      "</screen></informalexample> Then install your choice using its package name."
msgstr ""

#: random-bits.xml:576
#, no-c-format
#. Tag: screen
msgid "# apt-get install kernel-image-<replaceable>2.X.X-arch-etc</replaceable>"
msgstr ""

#: random-bits.xml:582
#, no-c-format
#. Tag: title
msgid "Set up the Boot Loader"
msgstr ""

#: random-bits.xml:583
#, no-c-format
#. Tag: para
msgid "To make your &debian; system bootable, set up your boot loader to load the installed kernel with your new root partition. Note that debootstrap does not install a boot loader, though you can use apt-get inside your Debian chroot to do so."
msgstr ""

#: random-bits.xml:590
#, no-c-format
#. Tag: para
msgid "Check <userinput>info grub</userinput> or <userinput>man lilo.conf</userinput> for instructions on setting up the bootloader. If you are keeping the system you used to install Debian, just add an entry for the Debian install to your existing grub <filename>menu.lst</filename> or <filename>lilo.conf</filename>. For <filename>lilo.conf</filename>, you could also copy it to the new system and edit it there. After you are done editing, call lilo (remember it will use <filename>lilo.conf</filename> relative to the system you call it from)."
msgstr ""

#: random-bits.xml:601
#, no-c-format
#. Tag: para
msgid "Here is a basic <filename>/etc/lilo.conf</filename> as an example:"
msgstr ""

#: random-bits.xml:605
#, no-c-format
#. Tag: screen
msgid ""
      "boot=/dev/hda6\n"
      "root=/dev/hda6\n"
      "install=menu\n"
      "delay=20\n"
      "lba32\n"
      "image=/vmlinuz\n"
      "label=Debian"
msgstr ""

#: random-bits.xml:607
#, no-c-format
#. Tag: para
msgid "Check <userinput>man yaboot.conf</userinput> for instructions on setting up the bootloader. If you are keeping the system you used to install Debian, just add an entry for the Debian install to your existing <filename>yaboot.conf</filename>. You could also copy it to the new system and edit it there. After you are done editing, call ybin (remember it will use <filename>yaboot.conf</filename> relative to the system you call it from)."
msgstr ""

#: random-bits.xml:617
#, no-c-format
#. Tag: para
msgid ""
      "Here is a basic <filename>/etc/yaboot.conf</filename> as an example: <informalexample><screen>\n"
      "boot=/dev/hda2\n"
      "device=hd:\n"
      "partition=6\n"
      "root=/dev/hda6\n"
      "magicboot=/usr/lib/yaboot/ofboot\n"
      "timeout=50\n"
      "image=/vmlinux\n"
      "label=Debian\n"
      "</screen></informalexample> On some machines, you may need to use <userinput>ide0:</userinput> instead of <userinput>hd:</userinput>."
msgstr ""

#: random-bits.xml:635
#, no-c-format
#. Tag: title
msgid "Installing &debian; over Parallel Line IP (PLIP)"
msgstr ""

#: random-bits.xml:637
#, no-c-format
#. Tag: para
msgid "This section explains how to install &debian; on a computer without Ethernet card, but with just a remote gateway computer attached via a Null-Modem cable (also called Null-Printer cable). The gateway computer should be connected to a network that has a Debian mirror on it (e.g. to the Internet)."
msgstr ""

#: random-bits.xml:645
#, no-c-format
#. Tag: para
msgid "In the example in this appendix we will set up a PLIP connection using a gateway connected to the Internet over a dial-up connection (ppp0). We will use IP addresses 192.168.0.1 and 192.168.0.2 for the PLIP interfaces on the target system and the source system respectively (these addresses should be unused within your network address space)."
msgstr ""

#: random-bits.xml:653
#, no-c-format
#. Tag: para
msgid "The PLIP connection set up during the installation will also be available after the reboot into the installed system (see <xref linkend=\"boot-new\"/>)."
msgstr ""

#: random-bits.xml:658
#, no-c-format
#. Tag: para
msgid "Before you start, you will need to check the BIOS configuration (IO base address and IRQ) for the parallel ports of both the source and target systems. The most common values are <literal>io=0x378</literal>, <literal>irq=7</literal>."
msgstr ""

#: random-bits.xml:668
#, no-c-format
#. Tag: title
msgid "Requirements"
msgstr ""

#: random-bits.xml:671
#, no-c-format
#. Tag: para
msgid "A target computer, called <emphasis>target</emphasis>, where Debian will be installed."
msgstr ""

#: random-bits.xml:677
#, no-c-format
#. Tag: para
msgid "System installation media; see <xref linkend=\"installation-media\"/>."
msgstr ""

#: random-bits.xml:682
#, no-c-format
#. Tag: para
msgid "Another computer connected to the Internet, called <emphasis>source</emphasis>, that will function as the gateway."
msgstr ""

#: random-bits.xml:688
#, no-c-format
#. Tag: para
msgid "A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;\">PLIP-Install-HOWTO</ulink> for more information on this cable and instructions how to make your own."
msgstr ""

#: random-bits.xml:700
#, no-c-format
#. Tag: title
msgid "Setting up source"
msgstr ""

#: random-bits.xml:701
#, no-c-format
#. Tag: para
msgid "The following shell script is a simple example of how to configure the source computer as a gateway to the Internet using ppp0."
msgstr ""

#: random-bits.xml:706
#, no-c-format
#. Tag: screen
msgid ""
      "#!/bin/sh\n"
      "\n"
      "# We remove running modules from kernel to avoid conflicts and to\n"
      "# reconfigure them manually.\n"
      "modprobe -r lp parport_pc\n"
      "modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</replaceable>\n"
      "modprobe plip\n"
      "\n"
      "# Configure the plip interface (plip0 for me, see dmesg | grep plip)\n"
      "ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint <replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
      "\n"
      "# Configure gateway\n"
      "modprobe iptable_nat\n"
      "iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j MASQUERADE\n"
      "echo 1 > /proc/sys/net/ipv4/ip_forward"
msgstr ""

#: random-bits.xml:712
#, no-c-format
#. Tag: title
msgid "Installing target"
msgstr ""

#: random-bits.xml:713
#, no-c-format
#. Tag: para
msgid "Boot the installation media. The installation needs to be run in expert mode; enter <userinput>expert</userinput> at the boot prompt. Below are the answers that should be given during various stages of the installation."
msgstr ""

#: random-bits.xml:725
#, no-c-format
#. Tag: guimenuitem
msgid "Load installer components"
msgstr ""

#: random-bits.xml:727
#, no-c-format
#. Tag: para
msgid "Select the <userinput>plip-modules</userinput> option from the list; this will make the PLIP drivers available to the installation system."
msgstr ""

#: random-bits.xml:735
#, no-c-format
#. Tag: guimenuitem
msgid "Detect network hardware"
msgstr ""

#: random-bits.xml:740
#, no-c-format
#. Tag: para
msgid "If target <emphasis>does</emphasis> have a network card, a list of driver modules for detected cards will be shown. If you want to force &d-i; to use plip instead, you have to deselect all listed driver modules. Obviously, if target doesn't have a network card, the installer will not show this list."
msgstr ""

#: random-bits.xml:749
#, no-c-format
#. Tag: para
msgid "Prompt for module parameters: Yes"
msgstr ""

#: random-bits.xml:754
#, no-c-format
#. Tag: para
msgid "Because no network card was detected/selected earlier, the installer will ask you to select a network driver module from a list. Select the <userinput>plip</userinput> module."
msgstr ""

#: random-bits.xml:761
#, no-c-format
#. Tag: para
msgid "Additional parameters for module parport_pc: <userinput><replaceable>io=0x378 irq=7</replaceable></userinput>"
msgstr ""

#: random-bits.xml:767
#, no-c-format
#. Tag: para
msgid "Additional parameters for module plip: leave empty"
msgstr ""

#: random-bits.xml:777
#, no-c-format
#. Tag: guimenuitem
msgid "Configure the network"
msgstr ""

#: random-bits.xml:780
#, no-c-format
#. Tag: para
msgid "Auto-configure network with DHCP: No"
msgstr ""

#: random-bits.xml:785
#, no-c-format
#. Tag: para
msgid "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
msgstr ""

#: random-bits.xml:790
#, no-c-format
#. Tag: para
msgid "Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></userinput>"
msgstr ""

#: random-bits.xml:796
#, no-c-format
#. Tag: para
msgid "Name server addresses: you can enter the same addresses used on source (see <filename>/etc/resolv.conf</filename>)"
msgstr ""