# SOME DESCRIPTIVE TITLE. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2012-07-20 14:12+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Tag: title #: install-methods.xml:5 #, no-c-format msgid "Obtaining System Installation Media" msgstr "" #. Tag: title #: install-methods.xml:12 #, no-c-format msgid "Official &debian-gnu; CD-ROM Sets" msgstr "" #. Tag: para #: install-methods.xml:13 #, no-c-format msgid "By far the easiest way to install &debian-gnu; is from an Official &debian; CD-ROM Set. You can buy a set from a vendor (see the CD vendors page). You may also download the CD-ROM images from a &debian; mirror and make your own set, if you have a fast network connection and a CD burner (see the Debian CD page for detailed instructions). If you have a &debian; CD set and CDs are bootable on your machine, you can skip right to ; much effort has been expended to ensure the files most people need are there on the CD. Although a full set of binary packages requires several CDs, it is unlikely you will need packages on the third CD and above. You may also consider using the DVD version, which saves a lot of space on your shelf and you avoid the CD shuffling marathon." msgstr "" #. Tag: para #: install-methods.xml:30 #, no-c-format msgid "If your machine doesn't support CD booting, but you do have a CD set, you can use an alternative strategy such as floppy disk, tape, emulated tape, hard disk, usb stick, net boot, or manually loading the kernel from the CD to initially boot the system installer. The files you need for booting by another means are also on the CD; the &debian; network archive and CD folder organization are identical. So when archive file paths are given below for particular files you need for booting, look for those files in the same directories and subdirectories on your CD." msgstr "" #. Tag: para #: install-methods.xml:52 #, no-c-format msgid "Once the installer is booted, it will be able to obtain all the other files it needs from the CD." msgstr "" #. Tag: para #: install-methods.xml:57 #, no-c-format msgid "If you don't have a CD set, then you will need to download the installer system files and place them on the installation tape floppy disk or hard disk or usb stick or a connected computer so they can be used to boot the installer." msgstr "" #. Tag: title #: install-methods.xml:83 #, no-c-format msgid "Downloading Files from &debian; Mirrors" msgstr "" #. Tag: para #: install-methods.xml:85 #, no-c-format msgid "To find the nearest (and thus probably the fastest) mirror, see the list of &debian; mirrors." msgstr "" #. Tag: para #: install-methods.xml:90 #, no-c-format msgid "When downloading files from a &debian; mirror using FTP, be sure to download the files in binary mode, not text or automatic mode." msgstr "" #. Tag: title #: install-methods.xml:98 #, no-c-format msgid "Where to Find Installation Images" msgstr "" #. Tag: para #: install-methods.xml:100 #, no-c-format msgid "The installation images are located on each &debian; mirror in the directory debian/dists/&releasename;/main/installer-&architecture;/current/images/ — the MANIFEST lists each image and its purpose." msgstr "" #. Tag: title #: install-methods.xml:113 #, no-c-format msgid "Thecus N2100 Installation Files" msgstr "" #. Tag: para #: install-methods.xml:114 #, no-c-format msgid "A firmware image is provided for the Thecus N2100 which will automatically boot debian-installer. This image can be installed using the Thecus firmware upgrade process. This firmware image can be obtained from &n2100-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:125 #, no-c-format msgid "GLAN Tank Installation Files" msgstr "" #. Tag: para #: install-methods.xml:126 #, no-c-format msgid "The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install &debian;. These images can be obtained from &glantank-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:136 #, no-c-format msgid "Kurobox Pro Installation Files" msgstr "" #. Tag: para #: install-methods.xml:137 #, no-c-format msgid "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install &debian;. These images can be obtained from &kuroboxpro-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:147 #, no-c-format msgid "HP mv2120 Installation Files" msgstr "" #. Tag: para #: install-methods.xml:148 #, no-c-format msgid "A firmware image is provided for the HP mv2120 which will automatically boot debian-installer. This image can be installed with uphpmvault on Linux and other systems and with the HP Media Vault Firmware Recovery Utility on Windows. The firmware image can be obtained from &mv2120-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:160 #, no-c-format msgid "QNAP Turbo Station Installation Files" msgstr "" #. Tag: para #: install-methods.xml:161 #, no-c-format msgid "The installation files for the QNAP Turbo Station consist of a kernel and ramdisk as well as a script to write these images to flash. You can obtain the installation files for QNAP TS-11x, TS-21x and TS-41x models from &qnap-kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:172 #, no-c-format msgid "Plug Computer and OpenRD Installation Files" msgstr "" #. Tag: para #: install-methods.xml:173 #, no-c-format msgid "The installation files for plug computers (SheevaPlug, GuruPlug, etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can obtain these files from &kirkwood-marvell-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:223 #, no-c-format msgid "Creating an IPL tape" msgstr "" #. Tag: para #: install-methods.xml:225 #, no-c-format msgid "If you can't boot (IPL) from the CD-ROM and you are not using VM you need to create an IPL tape first. This is described in section 3.4.3 in the Linux for IBM eServer zSeries and S/390: Distributions Redbook. The files you need to write to the tape are (in this order): kernel.debian, parmfile.debian and initrd.debian. The files can be downloaded from the tape sub-directory, see ." msgstr "" #. Tag: title #: install-methods.xml:249 #, no-c-format msgid "Creating Floppies from Disk Images" msgstr "" #. Tag: para #: install-methods.xml:250 #, no-c-format msgid "Bootable floppy disks are generally used as a last resort to boot the installer on hardware that cannot boot from CD or by other means." msgstr "" #. Tag: para #: install-methods.xml:255 #, no-c-format msgid "Booting the installer from floppy disk reportedly fails on Mac USB floppy drives." msgstr "" #. Tag: para #: install-methods.xml:260 #, no-c-format msgid "Disk images are files containing the complete contents of a floppy disk in raw form. Disk images, such as boot.img, cannot simply be copied to floppy drives. A special program is used to write the image files to floppy disk in raw mode. This is required because these images are raw representations of the disk; it is required to do a sector copy of the data from the file onto the floppy." msgstr "" #. Tag: para #: install-methods.xml:271 #, no-c-format msgid "There are different techniques for creating floppies from disk images. This section describes how to create floppies from disk images on different platforms." msgstr "" #. Tag: para #: install-methods.xml:277 #, no-c-format msgid "Before you can create the floppies, you will first need to download them from one of the &debian; mirrors, as explained in . If you already have an installation CD-ROM or DVD, the floppy images may also be included on the CD/DVD." msgstr "" #. Tag: para #: install-methods.xml:285 #, no-c-format msgid "No matter which method you use to create your floppies, you should remember to flip the write-protect tab on the floppies once you have written them, to ensure they are not damaged unintentionally." msgstr "" #. Tag: title #: install-methods.xml:293 #, no-c-format msgid "Writing Disk Images From a Linux or Unix System" msgstr "" #. Tag: para #: install-methods.xml:294 #, no-c-format msgid "" "To write the floppy disk image files to the floppy disks, you will probably need root access to the system. Place a good, blank floppy in the floppy drive. Next, use the command \n" "$ dd if=filename of=/dev/fd0 bs=1024 conv=sync ; sync\n" " where filename is one of the floppy disk image files. /dev/fd0 is a commonly used name of the floppy disk device, it may be different on your workstation (on Solaris, it is /dev/fd/0). The command may return to the prompt before Unix has finished writing the floppy disk, so look for the disk-in-use light on the floppy drive and be sure that the light is out and the disk has stopped revolving before you remove it from the drive. On some systems, you'll have to run a command to eject the floppy from the drive (on Solaris, use eject, see the manual page)." msgstr "" #. Tag: para #: install-methods.xml:315 #, no-c-format msgid "Some systems attempt to automatically mount a floppy disk when you place it in the drive. You might have to disable this feature before the workstation will allow you to write a floppy in raw mode. Unfortunately, how to accomplish this will vary based on your operating system. On Solaris, you can work around volume management to get raw access to the floppy. First, make sure that the floppy is auto-mounted (using volcheck or the equivalent command in the file manager). Then use a dd command of the form given above, just replace /dev/fd0 with /vol/rdsk/floppy_name, where floppy_name is the name the floppy disk was given when it was formatted (unnamed floppies default to the name unnamed_floppy). On other systems, ask your system administrator. " msgstr "" #. Tag: para #: install-methods.xml:336 #, no-c-format msgid "If writing a floppy on powerpc Linux, you will need to eject it. The eject program handles this nicely; you might need to install it." msgstr "" #. Tag: title #: install-methods.xml:354 #, no-c-format msgid "Writing Disk Images From DOS, Windows, or OS/2" msgstr "" #. Tag: para #: install-methods.xml:356 #, no-c-format msgid "If you have access to an i386 or amd64 machine, you can use one of the following programs to copy images to floppies." msgstr "" #. Tag: para #: install-methods.xml:361 #, no-c-format msgid "The rawrite1 and rawrite2 programs can be used under MS-DOS. To use these programs, first make sure that you are booted into DOS. Trying to use these programs from within a DOS box in Windows, or double-clicking on these programs from the Windows Explorer is not expected to work." msgstr "" #. Tag: para #: install-methods.xml:369 #, no-c-format msgid "The rwwrtwin program runs on Windows 95, NT, 98, 2000, ME, XP and probably later versions. To use it you will need to unpack diskio.dll in the same directory." msgstr "" #. Tag: para #: install-methods.xml:375 #, no-c-format msgid "These tools can be found on the Official &debian; CD-ROMs under the /tools directory." msgstr "" #. Tag: title #: install-methods.xml:388 #, no-c-format msgid "Writing Disk Images From MacOS" msgstr "" #. Tag: para #: install-methods.xml:389 #, no-c-format msgid "An AppleScript, Make &debian; Floppy, is available for burning floppies from the provided disk image files. It can be downloaded from . To use it, just unstuff it on your desktop, and then drag any floppy image file to it. You must have Applescript installed and enabled in your extensions manager. Disk Copy will ask you to confirm that you wish to erase the floppy and proceed to write the file image to it." msgstr "" #. Tag: para #: install-methods.xml:400 #, no-c-format msgid "You can also use the MacOS utility Disk Copy directly, or the freeware utility suntar. The root.bin file is an example of a floppy image. Use one of the following methods to create a floppy from the floppy image with these utilities." msgstr "" #. Tag: title #: install-methods.xml:411 #, no-c-format msgid "Writing Disk Images with Disk Copy" msgstr "" #. Tag: para #: install-methods.xml:412 #, no-c-format msgid "If you are creating the floppy image from files which were originally on the official &debian-gnu; CD, then the Type and Creator are already set correctly. The following Creator-Changer steps are only necessary if you downloaded the image files from a &debian; mirror." msgstr "" #. Tag: para #: install-methods.xml:421 #, no-c-format msgid "Obtain Creator-Changer and use it to open the root.bin file." msgstr "" #. Tag: para #: install-methods.xml:428 #, no-c-format msgid "Change the Creator to ddsk (Disk Copy), and the Type to DDim (binary floppy image). The case is sensitive for these fields." msgstr "" #. Tag: para #: install-methods.xml:435 #, no-c-format msgid "Important: In the Finder, use Get Info to display the Finder information about the floppy image, and X the File Locked check box so that MacOS will be unable to remove the boot blocks if the image is accidentally mounted." msgstr "" #. Tag: para #: install-methods.xml:444 #, no-c-format msgid "Obtain Disk Copy; if you have a MacOS system or CD it will very likely be there already, otherwise try ." msgstr "" #. Tag: para #: install-methods.xml:451 #, no-c-format msgid "Run Disk Copy, and select Utilities Make a Floppy , then select the locked image file from the resulting dialog. It will ask you to insert a floppy, then ask if you really want to erase it. When done it should eject the floppy." msgstr "" #. Tag: title #: install-methods.xml:466 #, no-c-format msgid "Writing Disk Images with suntar" msgstr "" #. Tag: para #: install-methods.xml:470 #, no-c-format msgid "Obtain suntar from . Start the suntar program and select Overwrite Sectors... from the Special menu." msgstr "" #. Tag: para #: install-methods.xml:478 #, no-c-format msgid "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)." msgstr "" #. Tag: para #: install-methods.xml:484 #, no-c-format msgid "Select the root.bin file in the file-opening dialog." msgstr "" #. Tag: para #: install-methods.xml:489 #, no-c-format msgid "After the floppy has been created successfully, select File Eject . If there are any errors writing the floppy, simply toss that floppy and try another." msgstr "" #. Tag: para #: install-methods.xml:497 #, no-c-format msgid "Before using the floppy you created, set the write protect tab! Otherwise if you accidentally mount it in MacOS, MacOS will helpfully ruin it." msgstr "" #. Tag: title #: install-methods.xml:516 #, no-c-format msgid "Preparing Files for USB Memory Stick Booting" msgstr "" #. Tag: para #: install-methods.xml:518 #, no-c-format msgid "To prepare the USB stick, you will need a system where GNU/Linux is already running and where USB is supported. With current GNU/Linux systems the USB stick should be automatically recognized when you insert it. If it is not you should check that the usb-storage kernel module is loaded. When the USB stick is inserted, it will be mapped to a device named /dev/sdX, where the X is a letter in the range a-z. You should be able to see to which device the USB stick was mapped by running the command dmesg after inserting it. To write to your stick, you may have to turn off its write protection switch." msgstr "" #. Tag: para #: install-methods.xml:531 #, no-c-format msgid "The procedures described in this section will destroy anything already on the device! Make very sure that you use the correct device name for your USB stick. If you use the wrong device the result could be that all information on for example a hard disk could be lost." msgstr "" #. Tag: title #: install-methods.xml:541 #, no-c-format msgid "Preparing a USB stick using a hybrid CD or DVD image" msgstr "" #. Tag: para #: install-methods.xml:542 #, no-c-format msgid "Debian CD and DVD images can now be written directly a USB stick, which is a very easy way to make a bootable USB stick. Simply choose a CD or DVD image that will fit on your USB stick. See to get a CD or DVD image." msgstr "" #. Tag: para #: install-methods.xml:549 #, no-c-format msgid "Alternatively, for very small USB sticks, only a few megabytes in size, you can download the mini.iso image from the netboot directory (at the location mentioned in )." msgstr "" #. Tag: para #: install-methods.xml:557 #, no-c-format msgid "A special method can be used to add firmware to the mini.iso. First, write the mini.iso to the USB stick. Next obtain the necessary firmware files. See for more information about firmware. Now unplug and replug the USB stick, and two partitions should now be visible on it. You should mount the second of the two partitions, and unpack the firmware onto it." msgstr "" #. Tag: screen #: install-methods.xml:567 #, no-c-format msgid "" "# mount /dev/sdX2 /mnt\n" "# cd /mnt\n" "# tar zxvf /path/to/firmware.tar.gz\n" "# cd /\n" "# umount" msgstr "" #. Tag: para #: install-methods.xml:573 #, no-c-format msgid "The CD or DVD image you choose should be written directly to the USB stick, overwriting its current contents. For example, when using an existing GNU/Linux system, the CD or DVD image file can be written to a USB stick as follows, after having made sure that the stick is unmounted:" msgstr "" #. Tag: screen #: install-methods.xml:580 #, no-c-format msgid "" "# cp debian.iso /dev/sdX\n" "# sync" msgstr "" #. Tag: para #: install-methods.xml:582 #, no-c-format msgid "Simply writing the CD or DVD image to USB like this should work fine for most users. The other options below are more complex, mainly for people with specialised needs." msgstr "" #. Tag: title #: install-methods.xml:593 #, no-c-format msgid "Manually copying files to the USB stick" msgstr "" #. Tag: para #: install-methods.xml:594 #, no-c-format msgid "An alternative way to set up your USB stick is to manually copy the installer files, and also a CD image to it. Note that the USB stick should be at least 1 GB in size (smaller setups are possible if you follow )." msgstr "" #. Tag: para #: install-methods.xml:601 #, no-c-format msgid "There is an all-in-one file hd-media/boot.img.gz which contains all the installer files (including the kernel) as well as syslinux and its configuration file as well as yaboot and its configuration file." msgstr "" #. Tag: para #: install-methods.xml:610 #, no-c-format msgid "Note that, although convenient, this method does have one major disadvantage: the logical size of the device will be limited to 1 GB, even if the capacity of the USB stick is larger. You will need to repartition the USB stick and create new file systems to get its full capacity back if you ever want to use it for some different purpose." msgstr "" #. Tag: para #: install-methods.xml:618 #, no-c-format msgid "To use this image simply extract it directly to your USB stick:" msgstr "" #. Tag: screen #: install-methods.xml:622 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX" msgstr "" #. Tag: para #: install-methods.xml:624 #, no-c-format msgid "Create a partition of type \"Apple_Bootstrap\" on your USB stick using mac-fdisk's C command and extract the image directly to that:" msgstr "" #. Tag: screen #: install-methods.xml:630 #, no-c-format msgid "# zcat boot.img.gz > /dev/sdX2" msgstr "" #. Tag: para #: install-methods.xml:632 #, no-c-format msgid "After that, mount the USB memory stick (mount /dev/sdX /mnt), (mount /dev/sdX2 /mnt), which will now have a FAT filesystem an HFS filesystem on it, and copy a &debian; ISO image (netinst, businesscard, or full CD) to it. Unmount the stick (umount /mnt) and you are done." msgstr "" #. Tag: title #: install-methods.xml:649 #, no-c-format msgid "Manually copying files to the USB stick — the flexible way" msgstr "" #. Tag: para #: install-methods.xml:650 #, no-c-format msgid "If you like more flexibility or just want to know what's going on, you should use the following method to put the files on your stick. One advantage of using this method is that — if the capacity of your USB stick is large enough — you have the option of copying a full CD ISO image to it." msgstr "" #. Tag: title #: install-methods.xml:665 install-methods.xml:787 #, no-c-format msgid "Partitioning the USB stick" msgstr "" #. Tag: para #: install-methods.xml:666 #, no-c-format msgid "We will show how to set up the memory stick to use the first partition, instead of the entire device." msgstr "" #. Tag: para #: install-methods.xml:671 #, no-c-format msgid "" "Since most USB sticks come pre-configured with a single FAT16 partition, you probably won't have to repartition or reformat the stick. If you have to do that anyway, use cfdisk or any other partitioning tool to create a FAT16 partition Don't forget to set the bootable bootable flag. , install an MBR using: \n" "# install-mbr /dev/sdX\n" " The install-mbr command is contained in the mbr &debian; package. Then create the filesystem using: \n" "# mkdosfs /dev/sdX1\n" " Take care that you use the correct device name for your USB stick. The mkdosfs command is contained in the dosfstools &debian; package." msgstr "" #. Tag: para #: install-methods.xml:695 #, no-c-format msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. Although any boot loader (e.g. lilo) should work, it's convenient to use syslinux, since it uses a FAT16 partition and can be reconfigured by just editing a text file. Any operating system which supports the FAT file system can be used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:705 #, no-c-format msgid "" "To put syslinux on the FAT16 partition on your USB stick, install the syslinux and mtools packages on your system, and do: \n" "# syslinux /dev/sdX1\n" " Again, take care that you use the correct device name. The partition must not be mounted when starting syslinux. This procedure writes a boot sector to the partition and creates the file ldlinux.sys which contains the boot loader code." msgstr "" #. Tag: title #: install-methods.xml:722 install-methods.xml:834 #, no-c-format msgid "Adding the installer image" msgstr "" #. Tag: para #: install-methods.xml:723 #, no-c-format msgid "Mount the partition (mount /dev/sdX1 /mnt) and copy the following installer image files to the stick: vmlinuz or linux (kernel binary) initrd.gz (initial ramdisk image) You can choose between either the regular version or the graphical version of the installer. The latter can be found in the gtk subdirectory. If you want to rename the files, please note that syslinux can only process DOS (8.3) file names." msgstr "" #. Tag: para #: install-methods.xml:747 #, no-c-format msgid "" "Next you should create a syslinux.cfg configuration file, which at a bare minimum should contain the following two lines (change the name of the kernel binary to linux if you used a netboot image): \n" "default vmlinuz\n" "append initrd=initrd.gz\n" " For the graphical installer you should add vga=788 to the second line. Other parameters can be appended as desired." msgstr "" #. Tag: para #: install-methods.xml:759 #, no-c-format msgid "To enable the boot prompt to permit further parameter appending, add a prompt 1 line." msgstr "" #. Tag: para #: install-methods.xml:764 install-methods.xml:874 #, no-c-format msgid "If you used an hd-media image, you should now copy the ISO file of a &debian; ISO image You can use either a businesscard, a netinst or a full CD image (see ). Be sure to select one that fits. Note that the netboot mini.iso image is not usable for this purpose. onto the stick. When you are done, unmount the USB memory stick (umount /mnt)." msgstr "" #. Tag: para #: install-methods.xml:788 #, no-c-format msgid "" "Most USB sticks do not come pre-configured in such a way that Open Firmware can boot from them, so you will need to repartition the stick. On Mac systems, run mac-fdisk /dev/sdX, initialise a new partition map using the i command, and create a new partition of type Apple_Bootstrap using the C command. (Note that the first \"partition\" will always be the partition map itself.) Then type \n" "$ hformat /dev/sdX2\n" " Take care that you use the correct device name for your USB stick. The hformat command is contained in the hfsutils &debian; package." msgstr "" #. Tag: para #: install-methods.xml:805 #, no-c-format msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. The yaboot boot loader can be installed on an HFS filesystem and can be reconfigured by just editing a text file. Any operating system which supports the HFS file system can be used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:814 #, no-c-format msgid "" "The normal ybin tool that comes with yaboot does not yet understand USB storage devices, so you will have to install yaboot by hand using the hfsutils tools. Type \n" "$ hmount /dev/sdX2\n" "$ hcopy -r /usr/lib/yaboot/yaboot :\n" "$ hattrib -c UNIX -t tbxi :yaboot\n" "$ hattrib -b :\n" "$ humount\n" " Again, take care that you use the correct device name. The partition must not be otherwise mounted during this procedure. This procedure writes the boot loader to the partition, and uses the HFS utilities to mark it in such a way that Open Firmware will boot it. Having done this, the rest of the USB stick may be prepared using the normal Unix utilities." msgstr "" #. Tag: para #: install-methods.xml:835 #, no-c-format msgid "Mount the partition (mount /dev/sdX2 /mnt) and copy the following installer image files to the stick:" msgstr "" #. Tag: para #: install-methods.xml:842 #, no-c-format msgid "vmlinux (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:847 #, no-c-format msgid "initrd.gz (initial ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:852 #, no-c-format msgid "yaboot.conf (yaboot configuration file)" msgstr "" #. Tag: para #: install-methods.xml:857 #, no-c-format msgid "boot.msg (optional boot message)" msgstr "" #. Tag: para #: install-methods.xml:864 #, no-c-format msgid "" "The yaboot.conf configuration file should contain the following lines: \n" "default=install\n" "root=/dev/ram\n" "\n" "message=/boot.msg\n" "\n" "image=/vmlinux\n" " label=install\n" " initrd=/initrd.gz\n" " initrd-size=10000\n" " read-only\n" " Please note that the initrd-size parameter may need to be increased, depending on the image you are booting." msgstr "" #. Tag: title #: install-methods.xml:902 #, no-c-format msgid "Preparing Files for Hard Disk Booting" msgstr "" #. Tag: para #: install-methods.xml:903 #, no-c-format msgid "The installer may be booted using boot files placed on an existing hard drive partition, either launched from another operating system or by invoking a boot loader directly from the BIOS." msgstr "" #. Tag: para #: install-methods.xml:909 #, no-c-format msgid "A full, pure network installation can be achieved using this technique. This avoids all hassles of removable media, like finding and burning CD images or struggling with too numerous and unreliable floppy disks." msgstr "" #. Tag: para #: install-methods.xml:916 #, no-c-format msgid "The installer cannot boot from files on an HFS+ file system. MacOS System 8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To determine whether your existing file system is HFS+, select Get Info for the volume in question. HFS file systems appear as Mac OS Standard, while HFS+ file systems say Mac OS Extended. You must have an HFS partition in order to exchange files between MacOS and Linux, in particular the installation files you download." msgstr "" #. Tag: para #: install-methods.xml:927 #, no-c-format msgid "Different programs are used for hard disk installation system booting, depending on whether the system is a NewWorld or an OldWorld model." msgstr "" #. Tag: title #: install-methods.xml:936 #, no-c-format msgid "Hard disk installer booting using LILO or GRUB" msgstr "" #. Tag: para #: install-methods.xml:938 #, no-c-format msgid "This section explains how to add to or even replace an existing linux installation using either LILO or GRUB." msgstr "" #. Tag: para #: install-methods.xml:944 #, no-c-format msgid "At boot time, both bootloaders support loading in memory not only the kernel, but also a disk image. This RAM disk can be used as the root file-system by the kernel." msgstr "" #. Tag: para #: install-methods.xml:950 #, no-c-format msgid "Copy the following files from the &debian; archives to a convenient location on your hard drive (note that LILO can not boot from files on an NTFS file system), for instance to /boot/newinstall/." msgstr "" #. Tag: para #: install-methods.xml:958 #, no-c-format msgid "vmlinuz (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:963 #, no-c-format msgid "initrd.gz (ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:970 #, no-c-format msgid "Finally, to configure the bootloader proceed to ." msgstr "" #. Tag: title #: install-methods.xml:980 #, no-c-format msgid "Hard disk installer booting using loadlin" msgstr "" #. Tag: para #: install-methods.xml:981 #, no-c-format msgid "This section explains how to prepare your hard drive for booting the installer from DOS using loadlin." msgstr "" #. Tag: para #: install-methods.xml:986 #, no-c-format msgid "Copy the following directories from a &debian; CD image to c:\\." msgstr "" #. Tag: para #: install-methods.xml:991 #, no-c-format msgid "/&x86-install-dir; (kernel binary and ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:996 #, no-c-format msgid "/tools (loadlin tool)" msgstr "" #. Tag: title #: install-methods.xml:1009 #, no-c-format msgid "Hard Disk Installer Booting for OldWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1010 #, no-c-format msgid "The boot-floppy-hfs floppy uses miBoot to launch Linux installation, but miBoot cannot easily be used for hard disk booting. BootX, launched from MacOS, supports booting from files placed on the hard disk. BootX can also be used to dual-boot MacOS and Linux after your &debian; installation is complete. For the Performa 6360, it appears that quik cannot make the hard disk bootable. So BootX is required on that model." msgstr "" #. Tag: para #: install-methods.xml:1023 #, no-c-format msgid "Download and unstuff the BootX distribution, available from , or in the dists/woody/main/disks-powerpc/current/powermac directory on &debian; http/ftp mirrors and official &debian; CDs. Use Stuffit Expander to extract it from its archive. Within the package, there is an empty folder called Linux Kernels. Download linux.bin and ramdisk.image.gz from the disks-powerpc/current/powermac folder, and place them in the Linux Kernels folder. Then place the Linux Kernels folder in the active System Folder." msgstr "" #. Tag: title #: install-methods.xml:1043 #, no-c-format msgid "Hard Disk Installer Booting for NewWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1044 #, no-c-format msgid "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as well as loading ELF binaries directly from the hard disk. These machines will boot Linux directly via yaboot, which supports loading a kernel and RAMdisk directly from an ext2 partition, as well as dual-booting with MacOS. Hard disk booting of the installer is particularly appropriate for newer machines without floppy drives. BootX is not supported and must not be used on NewWorld PowerMacs." msgstr "" #. Tag: para #: install-methods.xml:1055 #, no-c-format msgid "Copy (not move) the following four files which you downloaded earlier from the &debian; archives, onto the root level of your hard drive (this can be accomplished by option-dragging each file to the hard drive icon)." msgstr "" #. Tag: filename #: install-methods.xml:1065 install-methods.xml:1391 #, no-c-format msgid "vmlinux" msgstr "" #. Tag: filename #: install-methods.xml:1070 install-methods.xml:1396 #, no-c-format msgid "initrd.gz" msgstr "" #. Tag: filename #: install-methods.xml:1075 install-methods.xml:1401 #, no-c-format msgid "yaboot" msgstr "" #. Tag: filename #: install-methods.xml:1080 install-methods.xml:1406 #, no-c-format msgid "yaboot.conf" msgstr "" #. Tag: para #: install-methods.xml:1085 #, no-c-format msgid "Make a note of the partition number of the MacOS partition where you place these files. If you have the MacOS pdisk program, you can use the L command to check for the partition number. You will need this partition number for the command you type at the Open Firmware prompt when you boot the installer." msgstr "" #. Tag: para #: install-methods.xml:1093 #, no-c-format msgid "To boot the installer, proceed to ." msgstr "" #. Tag: title #: install-methods.xml:1106 #, no-c-format msgid "Preparing Files for TFTP Net Booting" msgstr "" #. Tag: para #: install-methods.xml:1107 #, no-c-format msgid "If your machine is connected to a local area network, you may be able to boot it over the network from another machine, using TFTP. If you intend to boot the installation system from another machine, the boot files will need to be placed in specific locations on that machine, and the machine configured to support booting of your specific machine." msgstr "" #. Tag: para #: install-methods.xml:1115 #, no-c-format msgid "You need to set up a TFTP server, and for many machines a DHCP server, or RARP server, or BOOTP server." msgstr "" #. Tag: para #: install-methods.xml:1122 #, no-c-format msgid "The Reverse Address Resolution Protocol (RARP) is one way to tell your client what IP address to use for itself. Another way is to use the BOOTP protocol. BOOTP is an IP protocol that informs a computer of its IP address and where on the network to obtain a boot image. The DHCP (Dynamic Host Configuration Protocol) is a more flexible, backwards-compatible extension of BOOTP. Some systems can only be configured via DHCP." msgstr "" #. Tag: para #: install-methods.xml:1136 #, no-c-format msgid "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good idea to use DHCP instead of BOOTP. Some of the latest machines are unable to boot using BOOTP." msgstr "" #. Tag: para #: install-methods.xml:1142 #, no-c-format msgid "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There is an rbootd package available in &debian;." msgstr "" #. Tag: para #: install-methods.xml:1147 #, no-c-format msgid "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to the client. Theoretically, any server, on any platform, which implements these protocols, may be used. In the examples in this section, we shall provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux." msgstr "" #. Tag: para #: install-methods.xml:1155 #, no-c-format msgid "For a &debian-gnu; server we recommend tftpd-hpa. It's written by the same author as the syslinux bootloader and is therefore least likely to cause issues. A good alternative is atftpd." msgstr "" #. Tag: title #: install-methods.xml:1171 #, no-c-format msgid "Setting up RARP server" msgstr "" #. Tag: para #: install-methods.xml:1172 #, no-c-format msgid "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC address) of the client computers to be installed. If you don't know this information, you can pick it off the initial OpenPROM boot messages, use the OpenBoot .enet-addr command, or boot into Rescue mode (e.g., from the rescue floppy) and use the command ip addr show dev eth0." msgstr "" #. Tag: para #: install-methods.xml:1184 #, no-c-format msgid "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, you use the rarpd program. You need to ensure that the Ethernet hardware address for the client is listed in the ethers database (either in the /etc/ethers file, or via NIS/NIS+) and in the hosts database. Then you need to start the RARP daemon. Issue the command (as root): /usr/sbin/rarpd -a on most Linux systems and SunOS 5 (Solaris 2), /usr/sbin/in.rarpd -a on some other Linux systems, or /usr/etc/rarpd -a in SunOS 4 (Solaris 1)." msgstr "" #. Tag: title #: install-methods.xml:1205 #, no-c-format msgid "Setting up a DHCP server" msgstr "" #. Tag: para #: install-methods.xml:1206 #, no-c-format msgid "One free software DHCP server is ISC dhcpd. For &debian-gnu;, the dhcp3-server package is recommended. Here is a sample configuration file for it (see /etc/dhcp3/dhcpd.conf):" msgstr "" #. Tag: screen #: install-methods.xml:1213 #, no-c-format msgid "" "option domain-name \"example.com\";\n" "option domain-name-servers ns1.example.com;\n" "option subnet-mask 255.255.255.0;\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "server-name \"servername\";\n" "\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option routers 192.168.1.1;\n" "}\n" "\n" "host clientname {\n" " filename \"/tftpboot.img\";\n" " server-name \"servername\";\n" " next-server servername;\n" " hardware ethernet 01:23:45:67:89:AB;\n" " fixed-address 192.168.1.90;\n" "}" msgstr "" #. Tag: para #: install-methods.xml:1215 #, no-c-format msgid "In this example, there is one server servername which performs all of the work of DHCP server, TFTP server, and network gateway. You will almost certainly need to change the domain-name options, as well as the server name and client hardware address. The filename option should be the name of the file which will be retrieved via TFTP." msgstr "" #. Tag: para #: install-methods.xml:1225 #, no-c-format msgid "After you have edited the dhcpd configuration file, restart it with /etc/init.d/dhcp3-server restart." msgstr "" #. Tag: title #: install-methods.xml:1233 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "" #. Tag: para #: install-methods.xml:1234 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-boot Execution Environment (PXE) method of TFTP. \n" "option domain-name \"example.com\";\n" "\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "\n" "allow booting;\n" "allow bootp;\n" "\n" "# The next paragraph needs to be modified to fit your case\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option broadcast-address 192.168.1.255;\n" "# the gateway address which can be different\n" "# (access to the internet for instance)\n" " option routers 192.168.1.1;\n" "# indicate the dns you want to use\n" " option domain-name-servers 192.168.1.3;\n" "}\n" "\n" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"pxelinux.0\";\n" " }\n" "}\n" " Note that for PXE booting, the client filename pxelinux.0 is a boot loader, not a kernel image (see below)." msgstr "" #. Tag: title #: install-methods.xml:1254 #, no-c-format msgid "Setting up a BOOTP server" msgstr "" #. Tag: para #: install-methods.xml:1255 #, no-c-format msgid "There are two BOOTP servers available for GNU/Linux. The first is CMU bootpd. The other is actually a DHCP server: ISC dhcpd. In &debian-gnu; these are contained in the bootp and dhcp3-server packages respectively." msgstr "" #. Tag: para #: install-methods.xml:1263 #, no-c-format msgid "" "To use CMU bootpd, you must first uncomment (or add) the relevant line in /etc/inetd.conf. On &debian-gnu;, you can run update-inetd --enable bootps, then /etc/init.d/inetd reload to do so. Just in case your BOOTP server does not run &debian;, the line in question should look like: \n" "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" " Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the good old BSD printcap, termcap, and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. Here is an example /etc/bootptab: \n" "client:\\\n" " hd=/tftpboot:\\\n" " bf=tftpboot.img:\\\n" " ip=192.168.1.90:\\\n" " sm=255.255.255.0:\\\n" " sa=192.168.1.1:\\\n" " ha=0123456789AB:\n" " You will need to change at least the ha option, which specifies the hardware address of the client. The bf option specifies the file a client should retrieve via TFTP; see for more details. On SGI machines you can just enter the command monitor and type printenv. The value of the eaddr variable is the machine's MAC address. " msgstr "" #. Tag: para #: install-methods.xml:1296 #, no-c-format msgid "By contrast, setting up BOOTP with ISC dhcpd is really easy, because it treats BOOTP clients as a moderately special case of DHCP clients. Some architectures require a complex configuration for booting clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply adding the allow bootp directive to the configuration block for the subnet containing the client in /etc/dhcp3/dhcpd.conf, and restart dhcpd with /etc/init.d/dhcp3-server restart." msgstr "" #. Tag: title #: install-methods.xml:1315 #, no-c-format msgid "Enabling the TFTP Server" msgstr "" #. Tag: para #: install-methods.xml:1316 #, no-c-format msgid "To get the TFTP server ready to go, you should first make sure that tftpd is enabled." msgstr "" #. Tag: para #: install-methods.xml:1321 #, no-c-format msgid "In the case of tftpd-hpa there are two ways the service can be run. It can be started on demand by the system's inetd daemon, or it can be set up to run as an independent daemon. Which of these methods is used is selected when the package is installed and can be changed by reconfiguring the package." msgstr "" #. Tag: para #: install-methods.xml:1330 #, no-c-format msgid "Historically, TFTP servers used /tftpboot as directory to serve images from. However, &debian-gnu; packages may use other directories to comply with the Filesystem Hierarchy Standard. For example, tftpd-hpa by default uses /srv/tftp. You may have to adjust the configuration examples in this section accordingly." msgstr "" #. Tag: para #: install-methods.xml:1340 #, no-c-format msgid "All in.tftpd alternatives available in &debian; should log TFTP requests to the system logs by default. Some of them support a -v argument to increase verbosity. It is recommended to check these log messages in case of boot problems as they are a good starting point for diagnosing the cause of errors." msgstr "" #. Tag: para #: install-methods.xml:1348 #, no-c-format msgid "" "If you intend to install &debian; on an SGI machine and your TFTP server is a GNU/Linux box running Linux 2.4, you'll need to set the following on your server: \n" "# echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc\n" " to turn off Path MTU discovery, otherwise the SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets are sent from a source port no greater than 32767, or the download will stall after the first packet. Again, it's Linux 2.4.X tripping this bug in the PROM, and you can avoid it by setting \n" "# echo \"2048 32767\" > /proc/sys/net/ipv4/ip_local_port_range\n" " to adjust the range of source ports the Linux TFTP server uses." msgstr "" #. Tag: title #: install-methods.xml:1370 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "" #. Tag: para #: install-methods.xml:1371 #, no-c-format msgid "Next, place the TFTP boot image you need, as found in , in the tftpd boot image directory. You may have to make a link from that file to the file which tftpd will use for booting a particular client. Unfortunately, the file name is determined by the TFTP client, and there are no strong standards." msgstr "" #. Tag: para #: install-methods.xml:1380 #, no-c-format msgid "On NewWorld Power Macintosh machines, you will need to set up the yaboot boot loader as the TFTP boot image. Yaboot will then retrieve the kernel and RAMdisk images via TFTP itself. You will need to download the following files from the netboot/ directory:" msgstr "" #. Tag: filename #: install-methods.xml:1411 #, no-c-format msgid "boot.msg" msgstr "" #. Tag: para #: install-methods.xml:1416 #, no-c-format msgid "For PXE booting, everything you should need is set up in the netboot/netboot.tar.gz tarball. Simply extract this tarball into the tftpd boot image directory. Make sure your dhcp server is configured to pass pxelinux.0 to tftpd as the filename to boot." msgstr "" #. Tag: para #: install-methods.xml:1424 #, no-c-format msgid "For PXE booting, everything you should need is set up in the netboot/netboot.tar.gz tarball. Simply extract this tarball into the tftpd boot image directory. Make sure your dhcp server is configured to pass /debian-installer/ia64/elilo.efi to tftpd as the filename to boot." msgstr "" #. Tag: title #: install-methods.xml:1436 #, no-c-format msgid "SPARC TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1437 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as SUN4M or SUN4C, to the filename. Thus, if your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename would be C0A80103.SUN4C. However, there are also subarchitectures where the file the client looks for is just client-ip-in-hex. An easy way to determine the hexadecimal code for the IP address is to enter the following command in a shell (assuming the machine's intended IP is 10.0.0.4). \n" "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n" " To get to the correct filename, you will need to change all letters to uppercase and if necessary append the subarchitecture name." msgstr "" #. Tag: para #: install-methods.xml:1453 #, no-c-format msgid "If you've done all this correctly, giving the command boot net from the OpenPROM should load the image. If the image cannot be found, try checking the logs on your tftp server to see which image name is being requested." msgstr "" #. Tag: para #: install-methods.xml:1460 #, no-c-format msgid "You can also force some sparc systems to look for a specific file name by adding it to the end of the OpenPROM boot command, such as boot net my-sparc.image. This must still reside in the directory that the TFTP server looks in." msgstr "" #. Tag: title #: install-methods.xml:1471 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1472 #, no-c-format msgid "On SGI machines you can rely on the bootpd to supply the name of the TFTP file. It is given either as the bf= in /etc/bootptab or as the filename= option in /etc/dhcpd.conf." msgstr "" #. Tag: title #: install-methods.xml:1580 #, no-c-format msgid "Automatic Installation" msgstr "" #. Tag: para #: install-methods.xml:1581 #, no-c-format msgid "For installing on multiple computers it's possible to do fully automatic installations. &debian; packages intended for this include fai-quickstart (which can use an install server) and the &debian; Installer itself. Have a look at the FAI home page for detailed information." msgstr "" #. Tag: title #: install-methods.xml:1593 #, no-c-format msgid "Automatic Installation Using the &debian; Installer" msgstr "" #. Tag: para #: install-methods.xml:1594 #, no-c-format msgid "The &debian; Installer supports automating installs via preconfiguration files. A preconfiguration file can be loaded from the network or from removable media, and used to fill in answers to questions asked during the installation process." msgstr "" #. Tag: para #: install-methods.xml:1601 #, no-c-format msgid "Full documentation on preseeding including a working example that you can edit is in ." msgstr ""