# random-bits.xml
# Changwoo Ryu <cwryu@debian.org>, 2005, 2006.
# Seok-moon Jang <drssay97@gmail.com>, 2005, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: random-bits.xml\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2007-01-07 13:24+0000\n"
"PO-Revision-Date: 2006-10-07 19:00+0900\n"
"Last-Translator: Seok-moon Jang <drssay97@gmail.com>\n"
"Language-Team: Korean <debian-l10n-korean@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-xml2pot; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#: random-bits.xml:4
#, no-c-format
msgid "Random Bits"
msgstr "여러가지 내용들"

#. Tag: title
#: random-bits.xml:11
#, no-c-format
msgid "Linux Devices"
msgstr "리눅스 장치"

#. Tag: para
#: random-bits.xml:12
#, no-c-format
msgid ""
"In Linux various special files can be found under the directory <filename>/"
"dev</filename>. These files are called device files and behave unlike "
"ordinary files. The most common types of device files are for block devices "
"and character devices. These files are an interface to the actual driver "
"(part of the Linux kernel) which in turn accesses the hardware. Another, "
"less common, type of device file is the named <firstterm>pipe</firstterm>. "
"The most important device files are listed in the tables below."
msgstr ""
"리눅스에서는 <filename>/dev</filename> 디렉토리 아래에 여러가지 특수 파일들"
"이 들어 있습니다. 이 파일을 장치 파일이라고 하고, 이 파일은 일반 파일과는 다"
"르게 동작합니다. 장치 파일의 가장 흔한 종류는 블럭 장치와 캐릭터 장치를 위한 "
"장치파일입니다. 이 파일은 (리눅스 커널에 들어 있는) 실제 드라이버에 대한 인터"
"페이스 역할을 합니다. (그리고 리눅스 커널에 들어 있는 드라이버는 하드웨어에 "
"접근합니다.) 흔하지는 않지만 또 다른 종류의 장치 파일은 <firstterm>파이프</"
"firstterm>라고 합니다. 아래 표에 몇몇 중요한 장치 파일이 쓰여 있습니다."

#. Tag: filename
#: random-bits.xml:27
#, no-c-format
msgid "<filename>fd0</filename>"
msgstr "<filename>fd0</filename>"

#. Tag: entry
#: random-bits.xml:28
#, no-c-format
msgid "First Floppy Drive"
msgstr "첫번째 플로피 드라이브"

#. Tag: filename
#: random-bits.xml:30
#, no-c-format
msgid "<filename>fd1</filename>"
msgstr "<filename>fd1</filename>"

#. Tag: entry
#: random-bits.xml:31
#, no-c-format
msgid "Second Floppy Drive"
msgstr "두번째 플로피 드라이브"

#. Tag: filename
#: random-bits.xml:37
#, no-c-format
msgid "<filename>hda</filename>"
msgstr "<filename>hda</filename>"

#. Tag: entry
#: random-bits.xml:38
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the first IDE port (Master)"
msgstr "첫번째 IDE 포트 마스터에 달린 IDE 하드디스크 / CD-ROM"

#. Tag: filename
#: random-bits.xml:40
#, no-c-format
msgid "<filename>hdb</filename>"
msgstr "<filename>hdb</filename>"

#. Tag: entry
#: random-bits.xml:41
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the first IDE port (Slave)"
msgstr "첫번째 IDE 포트 슬레이브에 달린 IDE 하드디스크 / CD-ROM"

#. Tag: filename
#: random-bits.xml:43
#, no-c-format
msgid "<filename>hdc</filename>"
msgstr "<filename>hdc</filename>"

#. Tag: entry
#: random-bits.xml:44
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the second IDE port (Master)"
msgstr "두번째 IDE 포트 마스터에 달린 IDE 하드디스크 / CD-ROM"

#. Tag: filename
#: random-bits.xml:46
#, no-c-format
msgid "<filename>hdd</filename>"
msgstr "<filename>hdd</filename>"

#. Tag: entry
#: random-bits.xml:47
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the second IDE port (Slave)"
msgstr "두번째 IDE 포트 슬레이브에 달린 IDE 하드디스크 / CD-ROM"

#. Tag: filename
#: random-bits.xml:49
#, no-c-format
msgid "hda1"
msgstr "hda1"

#. Tag: entry
#: random-bits.xml:50
#, no-c-format
msgid "First partition of the first IDE hard disk"
msgstr "첫번째 IDE 하드디스크의 첫번째 파티션"

#. Tag: filename
#: random-bits.xml:52
#, no-c-format
msgid "hdd15"
msgstr "hdd15"

#. Tag: entry
#: random-bits.xml:53
#, no-c-format
msgid "Fifteenth partition of the fourth IDE hard disk"
msgstr "네번째 IDE 하드디스크의 열다섯번째 파티션"

#. Tag: filename
#: random-bits.xml:59
#, no-c-format
msgid "<filename>sda</filename>"
msgstr "<filename>sda</filename>"

#. Tag: entry
#: random-bits.xml:60
#, no-c-format
msgid "SCSI Hard disk with lowest SCSI ID (e.g. 0)"
msgstr "SCSI ID가 가장 낮은 (0번) SCSI 하드디스크"

#. Tag: filename
#: random-bits.xml:62
#, no-c-format
msgid "<filename>sdb</filename>"
msgstr "<filename>sdb</filename>"

#. Tag: entry
#: random-bits.xml:63
#, no-c-format
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 1)"
msgstr "SCSI ID가 다음 번호인 (1번) SCSI 하드디스크"

#. Tag: filename
#: random-bits.xml:65
#, no-c-format
msgid "<filename>sdc</filename>"
msgstr "<filename>sdc</filename>"

#. Tag: entry
#: random-bits.xml:66
#, no-c-format
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 2)"
msgstr "SCSI ID가 다음 번호인 (2번) SCSI 하드디스크"

#. Tag: filename
#: random-bits.xml:68
#, no-c-format
msgid "sda1"
msgstr "sda1"

#. Tag: entry
#: random-bits.xml:69
#, no-c-format
msgid "First partition of the first SCSI hard disk"
msgstr "첫번째 SCSI 하드디스크의 첫번째 파티션"

#. Tag: filename
#: random-bits.xml:71
#, no-c-format
msgid "sdd10"
msgstr "sdd10"

#. Tag: entry
#: random-bits.xml:72
#, no-c-format
msgid "Tenth partition of the fourth SCSI hard disk"
msgstr "네번째 SCSI 하드디스크의 열번째 파티션"

#. Tag: filename
#: random-bits.xml:78
#, no-c-format
msgid "<filename>sr0</filename>"
msgstr "<filename>sr0</filename>"

#. Tag: entry
#: random-bits.xml:79
#, no-c-format
msgid "SCSI CD-ROM with the lowest SCSI ID"
msgstr "SCSI ID가 가장 낮은 SCSI CD-ROM"

#. Tag: filename
#: random-bits.xml:81
#, no-c-format
msgid "<filename>sr1</filename>"
msgstr "<filename>sr1</filename>"

#. Tag: entry
#: random-bits.xml:82
#, no-c-format
msgid "SCSI CD-ROM with the next higher SCSI ID"
msgstr "SCSI ID가 다음 번호인 (2번) SCSI CD-ROM"

#. Tag: filename
#: random-bits.xml:88
#, no-c-format
msgid "ttyS0"
msgstr "ttyS0"

#. Tag: entry
#: random-bits.xml:89
#, no-c-format
msgid "Serial port 0, COM1 under MS-DOS"
msgstr "시리얼 포트 0, MS-DOS에서는 COM1"

#. Tag: filename
#: random-bits.xml:91
#, no-c-format
msgid "ttyS1"
msgstr "ttyS1"

#. Tag: entry
#: random-bits.xml:92
#, no-c-format
msgid "Serial port 1, COM2 under MS-DOS"
msgstr "시리얼 포트 1, MS-DOS에서는 COM2"

#. Tag: filename
#: random-bits.xml:94
#, no-c-format
msgid "psaux"
msgstr "psaux"

#. Tag: entry
#: random-bits.xml:95
#, no-c-format
msgid "PS/2 mouse device"
msgstr "PS/2 마우스 장치"

#. Tag: filename
#: random-bits.xml:97
#, no-c-format
msgid "gpmdata"
msgstr "gpmdata"

#. Tag: entry
#: random-bits.xml:98
#, no-c-format
msgid "Pseudo device, repeater data from GPM (mouse) daemon"
msgstr "가장 장치, GPM (마우스) 데몬에서 나온 데이터의 리피터"

#. Tag: filename
#: random-bits.xml:104
#, no-c-format
msgid "cdrom"
msgstr "cdrom"

#. Tag: entry
#: random-bits.xml:105
#, no-c-format
msgid "Symbolic link to the CD-ROM drive"
msgstr "CD-ROM 드라이브에 대한 심볼릭 링크"

#. Tag: filename
#: random-bits.xml:107
#, no-c-format
msgid "mouse"
msgstr "mouse"

#. Tag: entry
#: random-bits.xml:108
#, no-c-format
msgid "Symbolic link to the mouse device file"
msgstr "마우스 장치 파일에 대한 심볼릭 링크"

#. Tag: filename
#: random-bits.xml:114
#, no-c-format
msgid "null"
msgstr "null"

#. Tag: entry
#: random-bits.xml:115
#, no-c-format
msgid "Anything written to this device will disappear"
msgstr "이 장치로 들어가는 데이터는 모두 사라집니다"

#. Tag: filename
#: random-bits.xml:117
#, no-c-format
msgid "zero"
msgstr "zero"

#. Tag: entry
#: random-bits.xml:118
#, no-c-format
msgid "One can endlessly read zeros out of this device"
msgstr "이 장치에서 끊임없이 0을 읽을 수 있습니다"

#. Tag: title
#: random-bits.xml:125
#, no-c-format
msgid "Setting Up Your Mouse"
msgstr "마우스 설정하기"

#. Tag: para
#: random-bits.xml:127
#, no-c-format
msgid ""
"The mouse can be used in both the Linux console (with gpm) and the X window "
"environment. The two uses can be made compatible if the gpm repeater is used "
"to allow the signal to flow to the X server as shown: "
"<informalexample><screen>\n"
"mouse =&gt; /dev/psaux  =&gt; gpm =&gt; /dev/gpmdata -&gt; /dev/mouse =&gt; "
"X\n"
"         /dev/ttyS0             (repeater)        (symlink)\n"
"         /dev/ttyS1\n"
"</screen></informalexample> Set the repeater protocol to be raw (in "
"<filename>/etc/gpm.conf</filename>) while setting X to the original mouse "
"protocol in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/"
"XF86Config-4</filename>."
msgstr ""
"마우스는 리눅스 콘솔에서 (gpm을 이용해) 사용할 수도 있고 X 윈도우 환경에서 사"
"용할 수도 있습니다. 이 두가지를 동시에 사용하려면 다음과 같이 gpm 리피터를 사"
"용해 마우스 신호를 X 서버에도 들어가도록 만들면 됩니다: "
"<informalexample><screen>\n"
"mouse =&gt; /dev/psaux  =&gt; gpm =&gt; /dev/gpmdata -&gt; /dev/mouse =&gt; "
"X\n"
"         /dev/ttyS0             (리피터)          (심볼릭 링크)\n"
"         /dev/ttyS1\n"
"</screen></informalexample> (<filename>/etc/gpm.conf</filename>에서) 리피터 "
"프로토콜을 raw로 하고 <filename>/etc/X11/XF86Config</filename>이나 "
"<filename>/etc/X11/XF86Config-4</filename>에서 X 설정은 원래의 마우스 프로토"
"콜로 합니다."

#. Tag: para
#: random-bits.xml:139
#, no-c-format
msgid ""
"This approach to use gpm even in X has advantages when the mouse is "
"unplugged inadvertently. Simply restarting gpm with "
"<informalexample><screen>\n"
"# /etc/init.d/gpm restart\n"
"</screen></informalexample> will re-connect the mouse in software without "
"restarting X."
msgstr ""
"gpm을 X에서도 사용하는 이런 방법은 마우스가 갑자기 빠졌을 때도 좋은 점이 있습"
"니다. gpm을 다음 명령으로 다시 시작하면, <informalexample><screen>\n"
"# /etc/init.d/gpm restart\n"
"</screen></informalexample> X를 다시 시작하지 않고도 소프트웨어적으로 마우스"
"를 다시 연결합니다."

#. Tag: para
#: random-bits.xml:148
#, no-c-format
msgid ""
"If gpm is disabled or not installed for some reason, make sure to set X to "
"read directly from a mouse device such as /dev/psaux. For details, refer to "
"the 3-Button Mouse mini-Howto at <filename>/usr/share/doc/HOWTO/en-txt/"
"mini/3-Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, "
"<filename>/usr/share/doc/gpm/FAQ.gz</filename>, and <ulink url=\"&url-xorg;"
"current/doc/html/mouse.html\">README.mouse</ulink>."
msgstr ""
"gpm을 사용하지 않거나 무언가의 이유로 설치하지 않았다면, X를 설정할 때 /dev/"
"psaux같은 마우스 장치에서 직접 신호를 읽어들이도록 하십시오. 자세한 사항은 "
"<filename>/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz</filename>의 3 "
"단추 마우스 미니 하우투, <userinput>man gpm</userinput>, <filename>/usr/"
"share/doc/gpm/FAQ.gz</filename>, <ulink url=\"&url-xorg;current/doc/html/"
"mouse.html\">README.mouse</ulink>를 참고하십시오."

#. Tag: para
#: random-bits.xml:158
#, no-c-format
msgid ""
"For PowerPC, in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/"
"X11/XF86Config-4</filename>, set the mouse device to <userinput>\"/dev/input/"
"mice\"</userinput>."
msgstr ""
"PowerPC의 경우, <filename>/etc/X11/XF86Config</filename> 혹은 <filename>/etc/"
"X11/XF86Config-4</filename> 파일에서 마우스 장치를 <userinput>\"/dev/input/"
"mice\"</userinput>로 하십시오."

#. Tag: para
#: random-bits.xml:164
#, no-c-format
msgid ""
"Modern kernels give you the capability to emulate a three-button mouse when "
"your mouse only has one button. Just add the following lines to <filename>/"
"etc/sysctl.conf</filename> file."
msgstr ""
"최근의 커널에서는 단추가 1개인 마우스로도 3 단추 마우스를 에뮬레이션할 수 있"
"습니다. 다음 줄을 <filename>/etc/sysctl.conf</filename> 파일에 추가하십시오."

#. Tag: screen
#: random-bits.xml:170
#, no-c-format
msgid ""
"# 3-button mouse emulation\n"
"# turn on emulation\n"
"/dev/mac_hid/mouse_button_emulation = 1\n"
"# Send middle mouse button signal with the F11 key\n"
"/dev/mac_hid/mouse_button2_keycode = 87\n"
"# Send right mouse button signal with the F12 key\n"
"/dev/mac_hid/mouse_button3_keycode = 88\n"
"# For different keys, use showkey to tell you what the code is."
msgstr ""
"# 단추 3개 마우스 에뮬레이션\n"
"# 에뮬레이션 켜기\n"
"/dev/mac_hid/mouse_button_emulation = 1\n"
"# 가운데 마우스 단추 신호를 F11 키로 보냅니다\n"
"/dev/mac_hid/mouse_button2_keycode = 87\n"
"# 오른쪽 마우스 단추 신호를 F12 키로 보냅니다\n"
"/dev/mac_hid/mouse_button3_keycode = 88\n"
"# 다른 키의 경우에는, showkey로 그 키의 코드가 무엇인지 알 수 있습니다."

#. Tag: title
#: random-bits.xml:177
#, no-c-format
msgid "Disk Space Needed for Tasks"
msgstr "작업마다 필요한 디스크 공간"

#. Tag: para
#: random-bits.xml:194
#, fuzzy, no-c-format
msgid ""
"A standard installation for the i386 architecture, including all standard "
"packages and using the default 2.6 kernel, takes up 442MB of disk space. A "
"minimal base installation, without the <quote>Standard system</quote> task "
"selected, will take 230MB."
msgstr ""
"기본 2.4 커널을 사용해 i386에서 기본 설치를 하려면 표준 꾸러미를 모두 합쳐서 "
"573MB의 디스크 공간을 차지합니다."

#. Tag: para
#: random-bits.xml:202
#, no-c-format
msgid ""
"In both cases this is the actual disk space used <emphasis>after</emphasis> "
"the installation is finished and any temporary files deleted. It also does "
"not take into account overhead used by the file system, for example for "
"journal files. This means that significantly more disk space is needed both "
"<emphasis>during</emphasis> the installation and for normal system use."
msgstr ""

#. Tag: para
#: random-bits.xml:211
#, no-c-format
msgid ""
"The following table lists sizes reported by aptitude for the tasks listed in "
"tasksel. Note that some tasks have overlapping constituents, so the total "
"installed size for two tasks together may be less than the total obtained by "
"adding up the numbers."
msgstr ""
"다음 표는 aptitude에서 표시하는 값으로 tasksel에 들어 있는 작업에 필요한 크기"
"입니다. 작업 중에는 겹치는 부분이 있기 때문에 두 개의 작업을 같이 설치하면 숫"
"자를 합친 전체 크기보다는 작을 수도 있습니다."

#. Tag: para
#: random-bits.xml:218
#, fuzzy, no-c-format
msgid ""
"Note that you will need to add the sizes listed in the table to the size of "
"the standard installation when determining the size of partitions. Most of "
"the size listed as <quote>Installed size</quote> will end up in <filename>/"
"usr</filename> and in <filename>/lib</filename>; the size listed as "
"<quote>Download size</quote> is (temporarily) required in <filename>/var</"
"filename>."
msgstr ""
"파티션의 크기를 결정할 때, 베이스를 설치했을 때의 크기에다가 다음 표에 나온 "
"크기를 더해야 합니다. <quote>설치 크기</quote>에 들어 있는 크기의 대부분은 "
"<filename>/usr</filename>에 해당합니다. <quote>내려받기 크기</quote>는 (일시"
"적으로) <filename>/var</filename>에 필요합니다."

#. Tag: entry
#: random-bits.xml:232
#, no-c-format
msgid "Task"
msgstr "작업"

#. Tag: entry
#: random-bits.xml:233
#, no-c-format
msgid "Installed size (MB)"
msgstr "설치 크기 (MB)"

#. Tag: entry
#: random-bits.xml:234
#, no-c-format
msgid "Download size (MB)"
msgstr "다운로드 크기 (MB)"

#. Tag: entry
#: random-bits.xml:235
#, no-c-format
msgid "Space needed to install (MB)"
msgstr "설치하는데 필요한 공간 (MB)"

#. Tag: entry
#: random-bits.xml:241
#, no-c-format
msgid "Desktop environment"
msgstr ""

#. Tag: entry
#: random-bits.xml:242
#, no-c-format
msgid "1267"
msgstr ""

#. Tag: entry
#: random-bits.xml:243
#, fuzzy, no-c-format
msgid "<entry>420</entry>"
msgstr "<entry>21</entry>"

#. Tag: entry
#: random-bits.xml:244
#, no-c-format
msgid "1667"
msgstr ""

#. Tag: entry
#: random-bits.xml:248
#, no-c-format
msgid "Laptop"
msgstr ""

#. Tag: para
#: random-bits.xml:250
#, no-c-format
msgid ""
"There is a large overlap of the Laptop task with the Destop environment "
"task. If you install both, the Laptop task will only require a few MB "
"additional disk space."
msgstr ""

#. Tag: entry
#: random-bits.xml:257
#, fuzzy, no-c-format
msgid "<entry>50</entry>"
msgstr "<entry>58</entry>"

#. Tag: entry
#: random-bits.xml:258
#, fuzzy, no-c-format
msgid "<entry>17</entry>"
msgstr "<entry>1</entry>"

#. Tag: entry
#: random-bits.xml:259
#, fuzzy, no-c-format
msgid "<entry>67</entry>"
msgstr "<entry>460</entry>"

#. Tag: entry
#: random-bits.xml:263
#, no-c-format
msgid "Web server"
msgstr "웹 서버"

#. Tag: entry
#: random-bits.xml:264
#, fuzzy, no-c-format
msgid "<entry>35</entry>"
msgstr "<entry>3</entry>"

#. Tag: entry
#: random-bits.xml:265
#, fuzzy, no-c-format
msgid "<entry>11</entry>"
msgstr "<entry>1</entry>"

#. Tag: entry
#: random-bits.xml:266
#, fuzzy, no-c-format
msgid "<entry>46</entry>"
msgstr "<entry>460</entry>"

#. Tag: entry
#: random-bits.xml:270
#, no-c-format
msgid "Print server"
msgstr "인쇄 서버"

#. Tag: entry
#: random-bits.xml:271
#, fuzzy, no-c-format
msgid "<entry>277</entry>"
msgstr "<entry>2</entry>"

#. Tag: entry
#: random-bits.xml:272
#, fuzzy, no-c-format
msgid "<entry>79</entry>"
msgstr "<entry>58</entry>"

#. Tag: entry
#: random-bits.xml:273
#, fuzzy, no-c-format
msgid "<entry>356</entry>"
msgstr "<entry>3</entry>"

#. Tag: entry
#: random-bits.xml:277
#, no-c-format
msgid "DNS server"
msgstr "DNS 서버"

#. Tag: entry
#: random-bits.xml:278
#, no-c-format
msgid "<entry>2</entry>"
msgstr "<entry>2</entry>"

#. Tag: entry
#: random-bits.xml:279
#, no-c-format
msgid "<entry>1</entry>"
msgstr "<entry>1</entry>"

#. Tag: entry
#: random-bits.xml:280
#, no-c-format
msgid "<entry>3</entry>"
msgstr "<entry>3</entry>"

#. Tag: entry
#: random-bits.xml:284
#, no-c-format
msgid "File server"
msgstr "파일 서버"

#. Tag: entry
#: random-bits.xml:285
#, fuzzy, no-c-format
msgid "<entry>49</entry>"
msgstr "<entry>460</entry>"

#. Tag: entry
#: random-bits.xml:286
#, no-c-format
msgid "<entry>21</entry>"
msgstr "<entry>21</entry>"

#. Tag: entry
#: random-bits.xml:287
#, fuzzy, no-c-format
msgid "<entry>70</entry>"
msgstr "<entry>58</entry>"

#. Tag: entry
#: random-bits.xml:291
#, no-c-format
msgid "Mail server"
msgstr "메일 서버"

#. Tag: entry
#: random-bits.xml:292
#, no-c-format
msgid "<entry>13</entry>"
msgstr "<entry>13</entry>"

#. Tag: entry
#: random-bits.xml:293
#, fuzzy, no-c-format
msgid "<entry>5</entry>"
msgstr "<entry>58</entry>"

#. Tag: entry
#: random-bits.xml:294
#, fuzzy, no-c-format
msgid "<entry>18</entry>"
msgstr "<entry>168</entry>"

#. Tag: entry
#: random-bits.xml:298
#, no-c-format
msgid "SQL database"
msgstr "SQL 데이터베이스"

#. Tag: entry
#: random-bits.xml:299
#, no-c-format
msgid "<entry>24</entry>"
msgstr "<entry>24</entry>"

#. Tag: entry
#: random-bits.xml:300
#, fuzzy, no-c-format
msgid "<entry>8</entry>"
msgstr "<entry>48</entry>"

#. Tag: entry
#: random-bits.xml:301
#, fuzzy, no-c-format
msgid "<entry>32</entry>"
msgstr "<entry>2</entry>"

#. Tag: para
#: random-bits.xml:307
#, fuzzy, no-c-format
msgid ""
"The <emphasis>Desktop</emphasis> task will install the GNOME desktop "
"environment."
msgstr ""
"<emphasis>Desktop</emphasis> 작업은 그놈과 KDE 데스크탑 환경을 모두 설치합니"
"다."

#. Tag: para
#: random-bits.xml:314
#, fuzzy, no-c-format
msgid ""
"If you install in a language other than English, <command>tasksel</command> "
"may automatically install a <firstterm>localization task</firstterm>, if one "
"is available for your language. Space requirements differ per language; you "
"should allow up to 350MB in total for download and installation."
msgstr ""
"영어가 아닌 언어로 설치한다면 <command>tasksel</command>에서 자동으로 "
"<firstterm>지역화 작업</firstterm>을 (해당 언어에 대한 작업이 있다면) 설치합"
"니다. 언어마다 필요한 공간이 다릅니다. 내려받고 설치하는데 최대 200MB까지의 "
"공간이 있어야 합니다."

#. Tag: title
#: random-bits.xml:329
#, no-c-format
msgid "Installing &debian; from a Unix/Linux System"
msgstr "유닉스/리눅스 시스템에서 &debian; 설치하기"

#. Tag: para
#: random-bits.xml:331
#, no-c-format
msgid ""
"This section explains how to install &debian; from an existing Unix or Linux "
"system, without using the menu-driven installer as explained in the rest of "
"the manual. This <quote>cross-install</quote> HOWTO has been requested by "
"users switching to &debian; from Red Hat, Mandrake, and SUSE. In this "
"section some familiarity with entering *nix commands and navigating the file "
"system is assumed. In this section, <prompt>$</prompt> symbolizes a command "
"to be entered in the user's current system, while <prompt>#</prompt> refers "
"to a command entered in the Debian chroot."
msgstr ""
"이 부분에서는 이 안내서의 다른 부분에 설명되어 있는 ncurses 기반 메뉴 방식 설"
"치 프로그램을 사용하지 않고, 기존 유닉스 혹은 리눅스 시스템을 이용해 "
"&debian; 배포판을 설치하는 방법을 설명합니다. 이 <quote>크로스 설치</quote> "
"HOWTO는 Red Hat, Mandrake, SUSE에서 &debian; 배포판으로 바꾸려는 사용자들에"
"게 필요한 부분입니다. 여기서는 유닉스 계열의 명령어를 입력하는 방법이나 파일 "
"시스템을 돌아다니는 데 익숙해져 있다고 가정합니다. 여기서 <prompt>$</prompt> "
"표시는 사용자의 기존 시스템에서 입력하는 명령어이고, <prompt>#</prompt> 표시"
"는 데비안 chroot에서 입력하는 명령어를 말합니다."

#. Tag: para
#: random-bits.xml:343
#, no-c-format
msgid ""
"Once you've got the new Debian system configured to your preference, you can "
"migrate your existing user data (if any) to it, and keep on rolling. This is "
"therefore a <quote>zero downtime</quote> &debian; install. It's also a "
"clever way for dealing with hardware that otherwise doesn't play friendly "
"with various boot or installation media."
msgstr ""
"새로 설치한 데비안 시스템을 필요에 맞게 설정하기만 하면, 기존 사용자 데이터"
"를 (있다면) 옮겨와서 계속 사용할 수 있습니다. 즉 <quote>다운타임이 없는</"
"quote> &debian; 설치입니다. 또 이 방법은 여러가지 부팅 미디어나 설치 미디어들"
"이 동작하지 않는 하드웨어에 설치하는 쉬운 방법이기도 합니다."

#. Tag: title
#: random-bits.xml:355
#, no-c-format
msgid "Getting Started"
msgstr "시작하기"

#. Tag: para
#: random-bits.xml:356
#, fuzzy, no-c-format
msgid ""
"With your current *nix partitioning tools, repartition the hard drive as "
"needed, creating at least one filesystem plus swap. You need around 350MB of "
"space available for a console only install, or about 1GB if you plan to "
"install X (more if you intend to install desktop environments like GNOME or "
"KDE)."
msgstr ""
"기존 유닉스용 파티션 도구를 이용해 하드 드라이브를 필요한 대로 다시 파티션하"
"십시오. 최소한 파일 시스템 한 개를 스왑으로 만드십시오. 콘솔만 설치하는 경우"
"는 최소 150MB의 공간이 필요하고 X를 설치한다면 최소 300MB가 필요합니다."

#. Tag: para
#: random-bits.xml:364
#, fuzzy, no-c-format
msgid ""
"Next, create file systems on the partitions. For example, to create an ext3 "
"file system on partition <filename>/dev/hda6</filename> (that's our example "
"root partition): <informalexample><screen>\n"
"# mke2fs -j /dev/<replaceable>hda6</replaceable>\n"
"</screen></informalexample> To create an ext2 file system instead, omit "
"<userinput>-j</userinput>."
msgstr ""
"다음과 같이 파티션에 파일 시스템을 만드십시오. 예를 들어 <filename>/dev/"
"hda6</filename> 파티션에 ext3 파일 시스템을 만드는 경우라면 (여기 예제에서 루"
"트 파티션입니다): <informalexample><screen>\n"
"# mke2fs -j /dev/hda6\n"
"</screen></informalexample> ext2 파일 시스템을 만드는 경우라면 <userinput>-"
"j</userinput> 옵션을 빼십시오."

#. Tag: para
#: random-bits.xml:374
#, fuzzy, no-c-format
msgid ""
"Initialize and activate swap (substitute the partition number for your "
"intended Debian swap partition): <informalexample><screen>\n"
"# mkswap /dev/<replaceable>hda5</replaceable>\n"
"# sync; sync; sync\n"
"# swapon /dev/<replaceable>hda5</replaceable>\n"
"</screen></informalexample> Mount one partition as <filename>/mnt/debinst</"
"filename> (the installation point, to be the root (<filename>/</filename>) "
"filesystem on your new system). The mount point name is strictly arbitrary, "
"it is referenced later below."
msgstr ""
"스왑을 초기화하고 활성화하십시오 (파티션을 사용하려는 데비안 스왑 파티션으로 "
"바꾸십시오): <informalexample><screen>\n"
"# mkswap /dev/hda5\n"
"# sync; sync; sync\n"
"# swapon /dev/hda5\n"
"</screen></informalexample> 한 파티션을 <filename>/mnt/debinst</filename>에 "
"(루트 (<filename>/</filename>) 파일시스템을 설치할 위치) 마운트하십시오. 마운"
"트 위치 이름은 마음대로 정한 것이고, 아래에서 계속 사용합니다."

#. Tag: screen
#: random-bits.xml:386
#, fuzzy, no-c-format
msgid ""
"# mkdir /mnt/debinst\n"
"# mount /dev/<replaceable>hda6</replaceable> /mnt/debinst"
msgstr ""
"# mkdir /mnt/debinst\n"
"# mount /dev/hda6 /mnt/debinst"

#. Tag: para
#: random-bits.xml:389
#, no-c-format
msgid ""
"If you want to have parts of the filesystem (e.g. /usr) mounted on separate "
"partitions, you will need to create and mount these directories manually "
"before proceding with the next stage."
msgstr ""
"파일시스템의 (예를 들어 /usr) 일부를 별도의 파티션에 마운트하려면, 다음 단계"
"로 넘어가기 전에 그 디렉토리를 수동으로 만들어서 마운트해야 합니다."

#. Tag: title
#: random-bits.xml:399
#, no-c-format
msgid "Install <command>debootstrap</command>"
msgstr "<command>debootstrap</command> 설치"

#. Tag: para
#: random-bits.xml:400
#, no-c-format
msgid ""
"The utility used by the Debian installer, and recognized as the official way "
"to install a Debian base system, is <command>debootstrap</command>. It uses "
"<command>wget</command> and <command>ar</command>, but otherwise depends "
"only on <classname>/bin/sh</classname> and basic Unix/Linux tools<footnote> "
"<para> These include the GNU core utilities and commands like <command>sed</"
"command>, <command>grep</command>, <command>tar</command> and <command>gzip</"
"command>. </para> </footnote>. Install <command>wget</command> and "
"<command>ar</command> if they aren't already on your current system, then "
"download and install <command>debootstrap</command>."
msgstr ""
"데비안 설치 프로그램이 사용하는 프로그램으로, 데비안 베이스 시스템을 설치하"
"는 공식적인 방법은 <command>debootstrap</command>입니다. "
"<command>debootstrap</command>은 <command>wget</command>과 <command>ar</"
"command>을 사용하지만, 그 밖에는 <classname>/bin/sh</classname>와 기본 Unix/"
"Linux도구들 <footnote><para> 여기엔 GNU 기본 유틸리티와 <command>sed</"
"command>, <command>grep</command>, <command>tar</command>와<command>gzip</"
"command>같은 명령을 포함합니다. </para> </footnote>만 있으면 됩니다. 기존 시"
"스템에 <command>wget</command>과 <command>ar</command>이 없으면 설치하십시"
"오. 그리고 <command>debootstrap</command>을 내려 받고 설치하십시오."

#. Tag: para
#: random-bits.xml:430
#, fuzzy, no-c-format
msgid ""
"Or, you can use the following procedure to install it manually. Make a work "
"folder for extracting the .deb into: <informalexample><screen>\n"
"# mkdir work\n"
"# cd work\n"
"</screen></informalexample> The <command>debootstrap</command> binary is "
"located in the Debian archive (be sure to select the proper file for your "
"architecture). Download the <command>debootstrap</command> .deb from the "
"<ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</"
"ulink>, copy the package to the work folder, and extract the files from it. "
"You will need to have root privileges to install the files."
msgstr ""
"아니면, 다음 방법을 이용해 수동으로 설치할 수도 있습니다. 먼저 .deb 파일을 "
"풀 작업용 폴더를 만드십시오: <informalexample><screen>\n"
"# mkdir work\n"
"# cd work\n"
"</screen></informalexample> 바이너리 파일은 데비안 아카이브에 있습니다. (아키"
"텍쳐에 맞는 파일을 선택하도록 하십시오) <ulink url=\"http://ftp.debian.org/"
"debian/pool/main/d/debootstrap/\"> 꾸러미 풀</ulink>에서 "
"<command>debootstrap</command> .deb 파일을 내려받으시고, 꾸러미를 작업용 폴더"
"에 복사하고, 바이너리 파일을 풀어 내십시오. 이 바이너리를 설치하려면 루트 권"
"한이 필요할 것입니다."

#. Tag: screen
#: random-bits.xml:445
#, fuzzy, no-c-format
msgid ""
"# ar -x debootstrap_0.X.X_all.deb\n"
"# cd /\n"
"# zcat /full-path-to-work/work/data.tar.gz | tar xv"
msgstr ""
"# ar -x debootstrap_0.X.X_아키텍처.deb\n"
"# cd /\n"
"# zcat /full-path-to-work/work/data.tar.gz | tar xv"

#. Tag: title
#: random-bits.xml:451
#, no-c-format
msgid "Run <command>debootstrap</command>"
msgstr "<command>debootstrap</command> 실행"

#. Tag: para
#: random-bits.xml:452
#, no-c-format
msgid ""
"<command>debootstrap</command> can download the needed files directly from "
"the archive when you run it. You can substitute any Debian archive mirror "
"for <userinput>http.us.debian.org/debian</userinput> in the command example "
"below, preferably a mirror close to you network-wise. Mirrors are listed at "
"<ulink url=\"http://www.debian.org/misc/README.mirrors\"></ulink>."
msgstr ""
"<command>debootstrap</command>을 실행하면 필요한 파일들을 아카이브에서 직접 "
"내려받습니다. 아래의 명령어 예제에서 <userinput>http.us.debian.org/debian</"
"userinput>을 아무 데비안 아카이브 미러로 바꿀 수 있습니다. 네트워크에서 가까"
"이 있는 미러로 하는 게 좋습니다. 미러 목록은 <ulink url=\"http://www.debian."
"org/misc/README.mirror\"></ulink>에 있습니다."

#. Tag: para
#: random-bits.xml:461
#, no-c-format
msgid ""
"If you have a &releasename; &debian; CD mounted at <filename>/cdrom</"
"filename>, you could substitute a file URL instead of the http URL: "
"<userinput>file:/cdrom/debian/</userinput>"
msgstr ""
"&releasename; &debian; CD를 <filename>/cdrom</filename>에 마운트했다면 http "
"URL 대신에 file URL을 쓸 수 있습니다: <userinput>file:/cdrom/debian/</"
"userinput>"

#. Tag: para
#: random-bits.xml:467
#, fuzzy, no-c-format
msgid ""
"Substitute one of the following for <replaceable>ARCH</replaceable> in the "
"<command>debootstrap</command> command: <userinput>alpha</userinput>, "
"<userinput>amd64</userinput>, <userinput>arm</userinput>, <userinput>hppa</"
"userinput>, <userinput>i386</userinput>, <userinput>ia64</userinput>, "
"<userinput>m68k</userinput>, <userinput>mips</userinput>, <userinput>mipsel</"
"userinput>, <userinput>powerpc</userinput>, <userinput>s390</userinput>, or "
"<userinput>sparc</userinput>."
msgstr ""
"<command>debootstrap</command> 명령에서 <replaceable>ARCH</replaceable>를 다"
"음 중의 하나로 바꾸십시오: <userinput>alpha</userinput>, <userinput>arm</"
"userinput>, <userinput>hppa</userinput>, <userinput>i386</userinput>, "
"<userinput>ia64</userinput>, <userinput>m68k</userinput>, <userinput>mips</"
"userinput>, <userinput>mipsel</userinput>, <userinput>powerpc</userinput>, "
"<userinput>s390</userinput>, <userinput>sparc</userinput>."

#. Tag: screen
#: random-bits.xml:485
#, fuzzy, no-c-format
msgid ""
"# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
"     /mnt/debinst http://ftp.us.debian.org/debian"
msgstr ""
"# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
"     /mnt/debinst http://http.us.debian.org/debian"

#. Tag: title
#: random-bits.xml:491
#, no-c-format
msgid "Configure The Base System"
msgstr "베이스 시스템 설정"

#. Tag: para
#: random-bits.xml:492
#, no-c-format
msgid ""
"Now you've got a real Debian system, though rather lean, on disk. "
"<command>chroot</command> into it: <informalexample><screen>\n"
"# LANG=C chroot /mnt/debinst /bin/bash\n"
"</screen></informalexample> After chrooting you may need to set the terminal "
"definition to be compatible with the Debian base system, for example:"
msgstr ""

#. Tag: screen
#: random-bits.xml:502
#, no-c-format
msgid "# export TERM=<replaceable>xterm-color</replaceable>"
msgstr ""

#. Tag: title
#: random-bits.xml:507
#, no-c-format
msgid "Mount Partitions"
msgstr "파티션 마운트하기"

#. Tag: para
#: random-bits.xml:508
#, fuzzy, no-c-format
msgid ""
"You need to create <filename>/etc/fstab</filename>. "
"<informalexample><screen>\n"
"# editor /etc/fstab\n"
"</screen></informalexample> Here is a sample you can modify to suit: "
"<informalexample><screen>\n"
"# /etc/fstab: static file system information.\n"
"#\n"
"# file system    mount point   type    options                  dump pass\n"
"/dev/XXX         /             ext3    defaults                 0    1\n"
"/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
"\n"
"/dev/XXX         none          swap    sw                       0    0\n"
"proc             /proc         proc    defaults                 0    0\n"
"\n"
"/dev/fd0         /media/floppy auto    noauto,rw,sync,user,exec 0    0\n"
"/dev/cdrom       /media/cdrom  iso9660 noauto,ro,user,exec      0    0\n"
"\n"
"/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
"/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
"</screen></informalexample> Use <userinput>mount -a</userinput> to mount all "
"the file systems you have specified in your <filename>/etc/fstab</filename>, "
"or, to mount file systems individually, use: <informalexample><screen>\n"
"# mount /path   # e.g.: mount /usr\n"
"</screen></informalexample> Current Debian systems have mountpoints for "
"removable media under <filename>/media</filename>, but keep compatibility "
"symlinks in <filename>/</filename>. Create these as as needed, for example: "
"<informalexample><screen>\n"
"# cd /media\n"
"# mkdir cdrom0\n"
"# ln -s cdrom0 cdrom\n"
"# cd /\n"
"# ln -s media/cdrom\n"
"</screen></informalexample> You can mount the proc file system multiple "
"times and to arbitrary locations, though <filename>/proc</filename> is "
"customary. If you didn't use <userinput>mount -a</userinput>, be sure to "
"mount proc before continuing:"
msgstr ""
"<filename>/etc/fstab</filename>을 만들어야 합니다. "
"<informalexample><screen>\n"
"# editor /etc/fstab\n"
"</screen></informalexample> 여기에 있는 예제를 필요에 맞게 수정하면 됩니다: "
"<informalexample><screen>\n"
"# /etc/fstab: static file system information.\n"
"#\n"
"# file system    mount point   type    options                  dump pass\n"
"/dev/XXX         /             ext3    defaults                 0    1\n"
"/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
"\n"
"/dev/XXX         none          swap    sw                       0    0\n"
"proc             /proc         proc    defaults                 0    0\n"
"\n"
"/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0\n"
"/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0\n"
"\n"
"/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
"/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
"</screen></informalexample> <userinput>mount -a</userinput> 명령으로 "
"<filename>/etc/fstab</filename>에 지정한 파일시스템을 모두 마운트하십시오. 아"
"니면 다음 명령으로 파일시스템을 하나하나 마운트하십시오: "
"<informalexample><screen>\n"
"# mount /path   # 예를 들어: mount /usr\n"
"</screen></informalexample> proc 파일시스템은 여러번 어느 위치에서든 마운트"
"할 수 있습니다. (하지만 /proc을 관행적으로 사용합니다.) <userinput>mount -a</"
"userinput> 명령을 사용하지 않았다면, 계속하시기 전에 꼭 proc을 마운트하십시"
"오."

#. Tag: screen
#: random-bits.xml:534
#, no-c-format
msgid "# mount -t proc proc /proc"
msgstr "# mount -t proc proc /proc"

#. Tag: para
#: random-bits.xml:536
#, no-c-format
msgid ""
"The command <userinput>ls /proc</userinput> should now show a non-empty "
"directory. Should this fail, you may be able to mount proc from outside the "
"chroot:"
msgstr ""
"<userinput>ls /proc</userinput> 명령을 실행하면 여러 파일이 들어 있는 디렉토"
"리 내용을 표시합니다. 이 명령이 실패하면 chroot 바깥에서 proc을 마운트할 수 "
"있습니다."

#. Tag: screen
#: random-bits.xml:542
#, no-c-format
msgid "# mount -t proc proc /mnt/debinst/proc"
msgstr "# mount -t proc proc /mnt/debinst/proc"

#. Tag: title
#: random-bits.xml:548
#, fuzzy, no-c-format
msgid "Setting Timezone"
msgstr "소스 설정하기"

#. Tag: para
#: random-bits.xml:549
#, no-c-format
msgid ""
"An option in the file <filename>/etc/default/rcS</filename> determines "
"whether the system will interpret the hardware clock as being set to UTC or "
"local time. The following command allow you to set that and choose your "
"timezone."
msgstr ""

#. Tag: screen
#: random-bits.xml:556
#, no-c-format
msgid ""
"# editor /etc/default/rcS\n"
"# tzconfig"
msgstr ""

#. Tag: title
#: random-bits.xml:562
#, no-c-format
msgid "Configure Networking"
msgstr "네트워크 설정하기"

#. Tag: para
#: random-bits.xml:563
#, fuzzy, no-c-format
msgid ""
"To configure networking, edit <filename>/etc/network/interfaces</filename>, "
"<filename>/etc/resolv.conf</filename>, <filename>/etc/hostname</filename> "
"and <filename>/etc/hosts</filename>. <informalexample><screen>\n"
"# editor /etc/network/interfaces\n"
"</screen></informalexample> Here are some simple examples from <filename>/"
"usr/share/doc/ifupdown/examples</filename>: <informalexample><screen>\n"
"######################################################################\n"
"# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n"
"# See the interfaces(5) manpage for information on what options are\n"
"# available.\n"
"######################################################################\n"
"\n"
"# We always want the loopback interface.\n"
"#\n"
"auto lo\n"
"iface lo inet loopback\n"
"\n"
"# To use dhcp:\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet dhcp\n"
"\n"
"# An example static IP setup: (broadcast and gateway are optional)\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet static\n"
"#     address 192.168.0.42\n"
"#     network 192.168.0.0\n"
"#     netmask 255.255.255.0\n"
"#     broadcast 192.168.0.255\n"
"#     gateway 192.168.0.1\n"
"</screen></informalexample> Enter your nameserver(s) and search directives "
"in <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n"
"# editor /etc/resolv.conf\n"
"</screen></informalexample> A simple example <filename>/etc/resolv.conf</"
"filename>: <informalexample><screen>\n"
"search hqdom.local\n"
"nameserver 10.1.1.36\n"
"nameserver 192.168.9.100\n"
"</screen></informalexample> Enter your system's host name (2 to 63 "
"characters): <informalexample><screen>\n"
"# echo DebianHostName &gt; /etc/hostname\n"
"</screen></informalexample> And a basic <filename>/etc/hosts</filename> with "
"IPv6 support: <informalexample><screen>\n"
"127.0.0.1 localhost DebianHostName\n"
"\n"
"# The following lines are desirable for IPv6 capable hosts\n"
"::1     ip6-localhost ip6-loopback\n"
"fe00::0 ip6-localnet\n"
"ff00::0 ip6-mcastprefix\n"
"ff02::1 ip6-allnodes\n"
"ff02::2 ip6-allrouters\n"
"ff02::3 ip6-allhosts\n"
"</screen></informalexample> If you have multiple network cards, you should "
"arrange the names of driver modules in the <filename>/etc/modules</filename> "
"file into the desired order. Then during boot, each card will be associated "
"with the interface name (eth0, eth1, etc.) that you expect."
msgstr ""
"네트워크를 설정하려면, <filename>/etc/network/interfaces</filename>, "
"<filename>/etc/resolv.conf</filename>, <filename>/etc/hostname</filename>과 "
"<filename>/etc/hosts</filename> 파일을 편집하십시오. "
"<informalexample><screen>\n"
"# editor /etc/network/interfaces \n"
"</screen></informalexample> 다음은 <filename>/usr/share/doc/ifupdown/"
"examples</filename>에 들어 있는 예제입니다: <informalexample><screen>\n"
"######################################################################\n"
"# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n"
"# See the interfaces(5) manpage for information on what options are\n"
"# available.\n"
"######################################################################\n"
"\n"
"# We always want the loopback interface.\n"
"#\n"
"auto lo\n"
"iface lo inet loopback\n"
"\n"
"# To use dhcp:\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet dhcp\n"
"\n"
"# An example static IP setup: (broadcast and gateway are optional)\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet static\n"
"#     address 192.168.0.42\n"
"#     network 192.168.0.0\n"
"#     netmask 255.255.255.0\n"
"#     broadcast 192.168.0.255\n"
"#     gateway 192.168.0.1\n"
"</screen></informalexample> 네임서버와 search 명령을 <filename>/etc/resolv."
"conf</filename>에 입력하십시오: <informalexample><screen>\n"
"# editor /etc/resolv.conf\n"
"</screen></informalexample> 간단한 <filename>/etc/resolv.conf</filename>: "
"<informalexample><screen>\n"
"search hqdom.local\\000\n"
"nameserver 10.1.1.36\n"
"nameserver 192.168.9.100\n"
"</screen></informalexample> 시스템의 호스트이름을 입력하십시오 (2글자에서 63"
"글자까지): <informalexample><screen>\n"
"# echo DebianHostName &gt; /etc/hostname\n"
"</screen></informalexample> 네트워크 카드가 여러개라면, <filename>/etc/"
"modules</filename>에 드라이버 모듈 이름을 적당한 순서로 맞춰야 합니다. 그래"
"야 부팅할 때 각 카드가 의도한 해당 인터페이스 이름으로 (eth0, eth1 등) 연결됩"
"니다."

#. Tag: title
#: random-bits.xml:604
#, fuzzy, no-c-format
msgid "Configure Apt"
msgstr "네트워크 설정하기"

#. Tag: para
#: random-bits.xml:605
#, no-c-format
msgid ""
"Debootstrap will have created a very basic <filename>/etc/apt/sources.list</"
"filename> that will allow installing additional packages. However, you may "
"want to add some additional sources, for example for source packages and "
"security updates: <informalexample><screen>\n"
"deb-src http://ftp.us.debian.org/debian etch main\n"
"\n"
"deb http://security.debian.org/ etch/updates main\n"
"deb-src http://security.debian.org/ etch/updates main\n"
"</screen></informalexample> Make sure to run <userinput>aptitude update</"
"userinput> after you have made changes to the sources list."
msgstr ""

#. Tag: title
#: random-bits.xml:621
#, fuzzy, no-c-format
msgid "Configure Locales and Keyboard"
msgstr "키보드 설정"

#. Tag: para
#: random-bits.xml:622
#, fuzzy, no-c-format
msgid ""
"To configure your locale settings to use a language other than English, "
"install the <classname>locales</classname> support package and configure it. "
"Currently the use of UTF-8 locales is recommended. "
"<informalexample><screen>\n"
"# aptitude install locales\n"
"# dpkg-reconfigure locales\n"
"</screen></informalexample> To configure your keyboard (if needed):"
msgstr ""
"영어가 아닌 언어를 사용할 때 로케일을 설정하려면 <classname>locales</"
"classname> 지원 꾸러미를 설치하고 그 꾸러미를 설정하십시오: "
"<informalexample><screen>\n"
"# aptitude install locales\n"
"# dpkg-reconfigure locales\n"
"</screen></informalexample> 주의: 이 명령을 실행하기 전에 source.list를 생성"
"하고 <command>apt-get update</command>를 실행해서 <classname>apt</classname>"
"를 설정해야 합니다. ASCII 혹은 latin1 이외의 문자셋을 사용하는 로케일을 사용"
"하려면 그 전에 적당한 지역화 HOWTO를 참고하십시오."

#. Tag: screen
#: random-bits.xml:632
#, fuzzy, no-c-format
msgid ""
"# aptitude install console-data\n"
"# dpkg-reconfigure console-data"
msgstr "# dpkg-reconfigure console-data"

#. Tag: para
#: random-bits.xml:634
#, no-c-format
msgid ""
"Note that the keyboard cannot be set while in the chroot, but will be "
"configured for the next reboot."
msgstr ""
"키보드는 chroot 안에 있을 때 설정할 수 없다는 데 유의하십시오. 다음에 다시 시"
"작한 다음에 설정합니다."

#. Tag: title
#: random-bits.xml:644
#, no-c-format
msgid "Install a Kernel"
msgstr "커널 설치"

#. Tag: para
#: random-bits.xml:645
#, fuzzy, no-c-format
msgid ""
"If you intend to boot this system, you probably want a Linux kernel and a "
"boot loader. Identify available pre-packaged kernels with:"
msgstr ""
"이 시스템을 부팅하려면, 리눅스 커널과 부트로더가 있어야 합니다. 다음 명령으"
"로 미리 꾸러미로 만들어져 있는 커널을 알아보십시오: "
"<informalexample><screen>\n"
"# apt-cache search linux-image\n"
"</screen></informalexample> 그리고 꾸러미 이름을 하나 골라서 설치하십시오."

#. Tag: screen
#: random-bits.xml:650
#, no-c-format
msgid "# apt-cache search linux-image"
msgstr ""

#. Tag: para
#: random-bits.xml:652
#, no-c-format
msgid ""
"If you intend to use a pre-packaged kernel, you may want to create the "
"configuration file <filename>/etc/kernel-img.conf</filename> before you do "
"so. Here's an example file:"
msgstr ""

#. Tag: screen
#: random-bits.xml:658
#, no-c-format
msgid ""
"# Kernel image management overrides\n"
"# See kernel-img.conf(5) for details\n"
"do_symlinks = yes\n"
"relative_links = yes\n"
"do_bootloader = yes\n"
"do_bootfloppy = no\n"
"do_initrd = yes\n"
"link_in_boot = no"
msgstr ""

#. Tag: para
#: random-bits.xml:660
#, no-c-format
msgid ""
"For detailed information about this file and the various options, consult "
"its man page which will be available after installing the <classname>kernel-"
"package</classname> package. We recommend that you check that the values are "
"appropriate for your system."
msgstr ""

#. Tag: para
#: random-bits.xml:667
#, no-c-format
msgid ""
"Then install the kernel package of your choice using its package name. "
"<informalexample><screen>\n"
"# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
"replaceable>\n"
"</screen></informalexample> If you did not create a <filename>/etc/kernel-"
"img.conf</filename> before installing a pre-packaged kernel, you may be "
"asked some questions during its installation that refer to it."
msgstr ""

#. Tag: title
#: random-bits.xml:681
#, no-c-format
msgid "Set up the Boot Loader"
msgstr "부트로더 설정하기"

#. Tag: para
#: random-bits.xml:682
#, no-c-format
msgid ""
"To make your &debian; system bootable, set up your boot loader to load the "
"installed kernel with your new root partition. Note that "
"<command>debootstrap</command> does not install a boot loader, though you "
"can use <command>aptitude</command> inside your Debian chroot to do so."
msgstr ""
"&debian; 시스템을 부팅 가능하게 하려면, 부트로더를 설정해서 루트 파티션에서 "
"설치한 커널을 읽어들이도록 하십시오. <command>debootstrap</command>은 부트로"
"더를 설치하지 않는다는 점에 주의하십시오. 하지만 <command>aptitude</command>"
"을 데비안 chroot 안에서 사용하면 부트로더를 설치할 수 있습니다."

#. Tag: para
#: random-bits.xml:689
#, fuzzy, no-c-format
msgid ""
"Check <userinput>info grub</userinput> or <userinput>man lilo.conf</"
"userinput> for instructions on setting up the bootloader. If you are keeping "
"the system you used to install Debian, just add an entry for the Debian "
"install to your existing grub <filename>menu.lst</filename> or "
"<filename>lilo.conf</filename>. For <filename>lilo.conf</filename>, you "
"could also copy it to the new system and edit it there. After you are done "
"editing, call <command>lilo</command> (remember it will use <filename>lilo."
"conf</filename> relative to the system you call it from)."
msgstr ""
"<userinput>info grub</userinput> 혹은 <userinput>man lilo.conf</userinput> 명"
"령으로 부트로더 설정 방법을 미리 알아보십시오. 데비안을 설치할 때 사용했던 기"
"존 시스템을 계속 유지하는 경우라면, 기존의 grub <filename>menu.lst</"
"filename> 혹은 <filename>lilo.conf</filename>에 데비안에 해당하는 항목을 추가"
"하십시오. <filename>lilo.conf</filename>의 경우, 파일을 새로운 시스템으로 복"
"사해 와서 편집할 수도 있습니다. 편집을 마친 다음에는 lilo를 실행하십시오. "
"(lilo를 실행하면 실행하는 시스템에 상대적인 <filename>lilo.conf</filename> 파"
"일을 사용하게 됩니다.)"

#. Tag: para
#: random-bits.xml:701
#, no-c-format
msgid ""
"Installing and setting up <classname>grub</classname> is as easy as: "
"<informalexample><screen>\n"
"# aptitude install grub\n"
"# grub-install --recheck --no-floppy /dev/<replaceable>hda</replaceable>\n"
"# update-grub\n"
"</screen></informalexample> The second command will install <command>grub</"
"command> (in this case in the MBR of <literal>hda</literal>). The last "
"command will create a sane and working <filename>/boot/grub/menu.lst</"
"filename>."
msgstr ""

#. Tag: para
#: random-bits.xml:711
#, no-c-format
msgid "Here is a basic <filename>/etc/lilo.conf</filename> as an example:"
msgstr "다음은 기본적인 <filename>/etc/lilo.conf</filename> 예제입니다:"

#. Tag: screen
#: random-bits.xml:715
#, fuzzy, no-c-format
msgid ""
"boot=/dev/<replaceable>hda6</replaceable>\n"
"root=/dev/<replaceable>hda6</replaceable>\n"
"install=menu\n"
"delay=20\n"
"lba32\n"
"image=/vmlinuz\n"
"label=Debian"
msgstr ""
"boot=/dev/hda6\n"
"root=/dev/hda6\n"
"install=menu\n"
"delay=20\n"
"lba32\n"
"image=/vmlinuz\n"
"label=Debian"

#. Tag: para
#: random-bits.xml:717
#, no-c-format
msgid ""
"Depending on which bootloader you selected, you can now make some additional "
"changes in <filename>/etc/kernel-img.conf</filename>."
msgstr ""

#. Tag: para
#: random-bits.xml:722
#, no-c-format
msgid ""
"For the <classname>grub</classname> bootloader, you should set the "
"<literal>do_bootloader</literal> option to <quote>no</quote>. And to "
"automatically update your <filename>/boot/grub/menu.lst</filename> on "
"installation or removal of Debian kernels, add the following lines: "
"<informalexample><screen>\n"
"postinst_hook = update-grub\n"
"postrm_hook   = update-grub\n"
"</screen></informalexample> For the <classname>lilo</classname> bootloader, "
"the value of <literal>do_bootloader</literal> needs to remain <quote>yes</"
"quote>."
msgstr ""

#. Tag: para
#: random-bits.xml:734
#, no-c-format
msgid ""
"Check <userinput>man yaboot.conf</userinput> for instructions on setting up "
"the bootloader. If you are keeping the system you used to install Debian, "
"just add an entry for the Debian install to your existing <filename>yaboot."
"conf</filename>. You could also copy it to the new system and edit it there. "
"After you are done editing, call ybin (remember it will use <filename>yaboot."
"conf</filename> relative to the system you call it from)."
msgstr ""
"<userinput>man yaboot.conf</userinput> 명령으로 부트로더 설정 방법을 미리 알"
"아보십시오. 데비안을 설치할 때 사용한 기존 시스템을 유지하는 경우라면, 기존"
"의 <filename>yaboot.conf</filename>에 데비안에 해당하는 항목을 추가하십시오. "
"파일을 새로운 시스템으로 복사해 와서 편집할 수도 있습니다. 편집을 마친 다음에"
"는 ybin을 실행하십시오. (ybin을 실행하면 실행하는 시스템에 상대적인 "
"<filename>yaboot.conf</filename> 파일을 사용하게 됩니다.)"

#. Tag: para
#: random-bits.xml:744
#, no-c-format
msgid ""
"Here is a basic <filename>/etc/yaboot.conf</filename> as an example: "
"<informalexample><screen>\n"
"boot=/dev/hda2\n"
"device=hd:\n"
"partition=6\n"
"root=/dev/hda6\n"
"magicboot=/usr/lib/yaboot/ofboot\n"
"timeout=50\n"
"image=/vmlinux\n"
"label=Debian\n"
"</screen></informalexample> On some machines, you may need to use "
"<userinput>ide0:</userinput> instead of <userinput>hd:</userinput>."
msgstr ""
"다음은 기본적인 <filename>/etc/yaboot.conf</filename> 예제입니다: "
"<informalexample><screen>\n"
"boot=/dev/hda2\n"
"device=hd:\n"
"partition=6\n"
"root=/dev/hda6\n"
"magicboot=/usr/lib/yaboot/ofboot\n"
"timeout=50\n"
"image=/vmlinux\n"
"label=Debian\n"
"</screen></informalexample> 일부 컴퓨터에서는, <userinput>ide0:</userinput>"
"을 <userinput>hd:</userinput> 대신에 써야 할 수도 있습니다."

#. Tag: title
#: random-bits.xml:757
#, no-c-format
msgid "Finishing touches"
msgstr ""

#. Tag: para
#: random-bits.xml:758
#, no-c-format
msgid ""
"As mentioned earlier, the installed system will be very basic. If you would "
"like to make the system a bit more mature, there is an easy method to "
"install all packages with <quote>standard</quote> priority: "
"<informalexample><screen>\n"
"# tasksel install standard\n"
"</screen></informalexample> Of course, you can also just use "
"<command>aptitude</command> to install packages individually."
msgstr ""

#. Tag: para
#: random-bits.xml:769
#, no-c-format
msgid ""
"After the installation there will be a lot of downloaded packages in "
"<filename>/var/cache/apt/archives/</filename>. You can free up some "
"diskspace by running:"
msgstr ""

#. Tag: screen
#: random-bits.xml:775
#, no-c-format
msgid "# aptitude clean"
msgstr ""

#. Tag: title
#: random-bits.xml:786
#, no-c-format
msgid "Installing &debian; over Parallel Line IP (PLIP)"
msgstr "병렬 라인 IP를 (PLIP) 이용해 &debian; 설치하기"

#. Tag: para
#: random-bits.xml:788
#, no-c-format
msgid ""
"This section explains how to install &debian; on a computer without an "
"Ethernet card, but with just a remote gateway computer attached via a Null-"
"Modem cable (also called Null-Printer cable). The gateway computer should be "
"connected to a network that has a Debian mirror on it (e.g. to the Internet)."
msgstr ""
"이 부분은 이더넷 카드가 없지만, 게이트웨이 컴퓨터에 널 모뎀 케이블을 (널 프린"
"터 케이블이라고도 합니다) 통해 연결되어 있는 컴퓨터에 &debian;을 설치하는 방"
"법을 설명합니다. 게이트웨이 컴퓨터는 데비안 미러가 있는 네트워크에 (예를 들"
"어 인터넷에) 연결되어 있어야 합니다."

#. Tag: para
#: random-bits.xml:796
#, no-c-format
msgid ""
"In the example in this appendix we will set up a PLIP connection using a "
"gateway connected to the Internet over a dial-up connection (ppp0). We will "
"use IP addresses 192.168.0.1 and 192.168.0.2 for the PLIP interfaces on the "
"target system and the source system respectively (these addresses should be "
"unused within your network address space)."
msgstr ""
"이 부록의 예제에서는 전화접속 연결을 통해 (ppp0) 인터넷에 연결된 게이트웨이"
"와 PLIP 연결을 합니다. 타겟 컴퓨터와 소스 컴퓨터 각각에 IP 주소로 "
"192.168.0.1 및 192.168.0.2를 사용합니다. (게이트웨이에 연결되어 있는 네트워크"
"에서 이 IP 주소는 사용하지 말아야 합니다.)"

#. Tag: para
#: random-bits.xml:804
#, no-c-format
msgid ""
"The PLIP connection set up during the installation will also be available "
"after the reboot into the installed system (see <xref linkend=\"boot-new\"/"
">)."
msgstr ""
"설치한 시스템으로 다시 시작한 다음에도 설치할 때 사용한 PLIP 연결을 설정할 "
"수 있습니다. (<xref linkend=\"boot-new\"/> 참고)"

#. Tag: para
#: random-bits.xml:809
#, no-c-format
msgid ""
"Before you start, you will need to check the BIOS configuration (IO base "
"address and IRQ) for the parallel ports of both the source and target "
"systems. The most common values are <literal>io=0x378</literal>, "
"<literal>irq=7</literal>."
msgstr ""
"시작하기 전에, 소스와 타겟 컴퓨터 모두에 대해 BIOS 설정의 병렬 포트 부분을 "
"(IO 베이스 주소 및 IRQ) 확인해야 합니다. 가장 많이 쓰이는 값은 "
"<literal>io=0x378</literal>, <literal>irq=7</literal>입니다."

#. Tag: title
#: random-bits.xml:819
#, no-c-format
msgid "Requirements"
msgstr "요구 사항"

#. Tag: para
#: random-bits.xml:822
#, no-c-format
msgid ""
"A target computer, called <emphasis>target</emphasis>, where Debian will be "
"installed."
msgstr "데비안을 설치할 <emphasis>타겟</emphasis>이라고 하는 타겟 컴퓨터."

#. Tag: para
#: random-bits.xml:828
#, no-c-format
msgid "System installation media; see <xref linkend=\"installation-media\"/>."
msgstr "시스템 설치 미디어. <xref linkend=\"installation-media\"/> 참고."

#. Tag: para
#: random-bits.xml:833
#, no-c-format
msgid ""
"Another computer connected to the Internet, called <emphasis>source</"
"emphasis>, that will function as the gateway."
msgstr ""
"인터넷에 연결된 <emphasis>소스</emphasis>라고 하는 컴퓨터, 게이트웨이로 동작"
"합니다."

#. Tag: para
#: random-bits.xml:839
#, no-c-format
msgid ""
"A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;"
"\">PLIP-Install-HOWTO</ulink> for more information on this cable and "
"instructions how to make your own."
msgstr ""
"DB-25 널모뎀 케이블. 이 케이블에 대한 정보 및 케이블을 직접 만드는 방법은 "
"<ulink url=\"&url-plip-install-howto;\">PLIP-Install-HOWTO</ulink>를 참고하십"
"시오."

#. Tag: title
#: random-bits.xml:851
#, no-c-format
msgid "Setting up source"
msgstr "소스 설정하기"

#. Tag: para
#: random-bits.xml:852
#, no-c-format
msgid ""
"The following shell script is a simple example of how to configure the "
"source computer as a gateway to the Internet using ppp0."
msgstr ""
"다음 쉘 스크립트는 소스 컴퓨터를 ppp0를 사용한 인터넷 게이트웨이로 설정하는 "
"예제입니다."

#. Tag: screen
#: random-bits.xml:857
#, no-c-format
msgid ""
"#!/bin/sh\n"
"\n"
"# We remove running modules from kernel to avoid conflicts and to\n"
"# reconfigure them manually.\n"
"modprobe -r lp parport_pc\n"
"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</"
"replaceable>\n"
"modprobe plip\n"
"\n"
"# Configure the plip interface (plip0 for me, see dmesg | grep plip)\n"
"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint "
"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
"\n"
"# Configure gateway\n"
"modprobe iptable_nat\n"
"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j "
"MASQUERADE\n"
"echo 1 > /proc/sys/net/ipv4/ip_forward"
msgstr ""
"#!/bin/sh\n"
"\n"
"# 커널에서 실행중인 모듈을 제거해서 충돌을 방지하고 다시\n"
"# 수동으로 설정합니다.\n"
"modprobe -r lp parport_pc\n"
"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</"
"replaceable>\n"
"modprobe plip\n"
"\n"
"# plip 인터페이스를 설정합니다 (이 경우는 plip0, dmesg | grep plip 명령으로 "
"확인하십시오)\n"
"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint "
"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
"\n"
"# gateway 설정\n"
"modprobe iptable_nat\n"
"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j "
"MASQUERADE\n"
"echo 1 > /proc/sys/net/ipv4/ip_forward"

#. Tag: title
#: random-bits.xml:863
#, no-c-format
msgid "Installing target"
msgstr "타겟 설치"

#. Tag: para
#: random-bits.xml:864
#, no-c-format
msgid ""
"Boot the installation media. The installation needs to be run in expert "
"mode; enter <userinput>expert</userinput> at the boot prompt. If you need to "
"set parameters for kernel modules, you also need to do this at the boot "
"prompt. For example, to boot the installer and set values for the <quote>io</"
"quote> and <quote>irq</quote> options for the parport_pc module, enter the "
"following at the boot prompt: <informalexample><screen>\n"
"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc."
"irq=<replaceable>7</replaceable>\n"
"</screen></informalexample> Below are the answers that should be given "
"during various stages of the installation."
msgstr ""
"설치 미디어를 부팅하십시오. 설치는 전문가 모드에서 실행해야 합니다. 부팅 프롬"
"프트에서 <userinput>expert</userinput>를 입력하십시오. 커널 모듈의 파라미터"
"를 설정하려면, 부팅 파라미터에도 설정해야 합니다. 예를 들어, 설치 프로그램을 "
"부팅하고 partport_pc 모듈의 <quote>io</quote> 및 <quote>irq</quote> 파라미터"
"의 값을 설정하려면, 다음을 부팅 파라미터에 입력하십시오: "
"<informalexample><screen>\n"
"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc."
"irq=<replaceable>7</replaceable>\n"
"</screen></informalexample> 아래는 설치 단계에서 입력해야 할 사항들입니다."

#. Tag: guimenuitem
#: random-bits.xml:883
#, no-c-format
msgid "Load installer components from CD"
msgstr "CD에서 설치 프로그램 구성 요소 읽어들이기"

#. Tag: para
#: random-bits.xml:885
#, no-c-format
msgid ""
"Select the <userinput>plip-modules</userinput> option from the list; this "
"will make the PLIP drivers available to the installation system."
msgstr ""
"목록에서 <userinput>plip-modules</userinput> 옵션을 선택하십시오. 그러면 설"
"치 시스템에서 PLIP 드라이버를 사용할 수 있습니다."

#. Tag: guimenuitem
#: random-bits.xml:893
#, no-c-format
msgid "Detect network hardware"
msgstr "네트워크 하드웨어 검색"

#. Tag: para
#: random-bits.xml:898
#, no-c-format
msgid ""
"If target <emphasis>does</emphasis> have a network card, a list of driver "
"modules for detected cards will be shown. If you want to force &d-i; to use "
"plip instead, you have to deselect all listed driver modules. Obviously, if "
"target doesn't have a network card, the installer will not show this list."
msgstr ""
"만약 타겟에 네트워크 카드가 <emphasis>있으면</emphasis>, 검색한 드라이버 모듈"
"의 목록이 표시됩니다. &d-i;에서 plip을 강제로 사용하려면 목록에 있는 드라이"
"버 모듈을 모두 선택 해제하십시오. 물론 타겟에 네트워크 카드가 없으면 이 목록"
"은 표시하지 않습니다."

#. Tag: para
#: random-bits.xml:907
#, no-c-format
msgid ""
"Because no network card was detected/selected earlier, the installer will "
"ask you to select a network driver module from a list. Select the "
"<userinput>plip</userinput> module."
msgstr ""
"앞에서 네트워크 카드를 찾지/검색하지 못했으므로, 목록에서 네트워크 드라이버"
"의 모듈을 설치합니다. <userinput>plip</userinput> 모듈을 선택하십시오."

#. Tag: guimenuitem
#: random-bits.xml:919
#, no-c-format
msgid "Configure the network"
msgstr "네트워크 설정"

#. Tag: para
#: random-bits.xml:922
#, no-c-format
msgid "Auto-configure network with DHCP: No"
msgstr "DHCP로 네트워크 자동 설정: 아니오"

#. Tag: para
#: random-bits.xml:927
#, no-c-format
msgid ""
"IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
msgstr "IP 주소: <userinput><replaceable>192.168.0.1</replaceable></userinput>"

#. Tag: para
#: random-bits.xml:932
#, no-c-format
msgid ""
"Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
"userinput>"
msgstr ""
"Point-to-point 주소: <userinput><replaceable>192.168.0.2</replaceable></"
"userinput>"

#. Tag: para
#: random-bits.xml:938
#, no-c-format
msgid ""
"Name server addresses: you can enter the same addresses used on source (see "
"<filename>/etc/resolv.conf</filename>)"
msgstr ""
"네임서버 주소: 소스에서 사용한 같은 주소를 입력합니다. (<filename>/etc/"
"resolv.conf</filename> 파일 참고)"

#. Tag: title
#: random-bits.xml:957
#, no-c-format
msgid "The Graphical Installer"
msgstr ""

#. Tag: para
#: random-bits.xml:958
#, no-c-format
msgid ""
"The graphical version of the installer is only available for a limited "
"number of architectures, including &arch-title;. The functionality of the "
"graphical installer is essentially the same as that of the regular installer "
"as it basically uses the same programs, but with a different frontend."
msgstr ""

#. Tag: para
#: random-bits.xml:966
#, no-c-format
msgid ""
"Although the functionality is identical, the graphical installer still has a "
"few significant advantages. The main advantage is that it supports more "
"languages, namely those that use a character set that cannot be displayed "
"with the regular <quote>newt</quote> frontend. It also has a few usability "
"advantages such as the option to use a mouse, and in some cases several "
"questions can be displayed on a single screen."
msgstr ""

#. Tag: para
#: random-bits.xml:975
#, no-c-format
msgid ""
"The graphical installer is available with all CD images and with the hd-"
"media installation method. As the graphical installer uses a separate (much "
"larger) initrd than the regular installer, it has to be booted using "
"<userinput>installgui</userinput> instead of <userinput>install</userinput>. "
"Analogous, the expert and rescue modes are booted using "
"<userinput>expertgui</userinput> and <userinput>rescuegui</userinput> "
"respectively."
msgstr ""

#. Tag: para
#: random-bits.xml:985
#, no-c-format
msgid ""
"It is also available as a special <quote>mini</quote> ISO image<footnote id="
"\"gtk-miniiso\"> <para> The mini ISO image can be downloaded from a Debian "
"mirror as described in <xref linkend=\"downloading-files\"/>. Look for "
"<quote>gtk-miniiso</quote>. </para> </footnote>, which is mainly useful for "
"testing; in this case the image is booted just using <userinput>install</"
"userinput>. There is no graphical installer image that can be netbooted."
msgstr ""

#. Tag: para
#: random-bits.xml:999
#, no-c-format
msgid ""
"For &arch-title;, currently only an experimental <quote>mini</quote> ISO "
"image is available<footnote id=\"gtk-miniiso\"> <para> The mini ISO image "
"can be downloaded from a Debian mirror as described in <xref linkend="
"\"downloading-files\"/>. Look for <quote>gtk-miniiso</quote>. </para> </"
"footnote>. It should work on almost all PowerPC systems that have an ATI "
"graphical card, but is unlikely to work on other systems."
msgstr ""

#. Tag: para
#: random-bits.xml:1012
#, no-c-format
msgid ""
"The graphical installer requires significantly more memory to run than the "
"regular installer: &minimum-memory-gtk;. If insufficient memory is "
"available, it will automatically fall back to the regular <quote>newt</"
"quote> frontend."
msgstr ""

#. Tag: para
#: random-bits.xml:1019
#, no-c-format
msgid ""
"You can add boot parameters when starting the graphical installer, just as "
"with the regular installer. One of those parameters allows you to configure "
"the mouse for left-handed use. See <xref linkend=\"boot-parms\"/> for valid "
"parameters."
msgstr ""

#. Tag: title
#: random-bits.xml:1029
#, no-c-format
msgid "Using the graphical installer"
msgstr ""

#. Tag: para
#: random-bits.xml:1030
#, no-c-format
msgid ""
"As already mentioned, the graphical installer basically works the same as "
"the regular installer and thus the rest of this manual can be used to guide "
"you through the installation process."
msgstr ""

#. Tag: para
#: random-bits.xml:1036
#, no-c-format
msgid ""
"If you prefer using the keyboard over the mouse, there are two things you "
"need to know. To expand a collapsed list (used for example for the selection "
"of countries within continents), you can use the <keycap>+</keycap> and "
"<keycap>-</keycap> keys. For questions where more than one item can be "
"selected (e.g. task selection), you first need to tab to the "
"<guibutton>Continue</guibutton> button after making your selections; hitting "
"enter will toggle a selection, not activate <guibutton>Continue</guibutton>."
msgstr ""

#. Tag: para
#: random-bits.xml:1046
#, no-c-format
msgid ""
"To switch to another console, you will also need to use the <keycap>Ctrl</"
"keycap> key, just as with the X Window System. For example, to switch to VT1 "
"you would use: <keycombo> <keycap>Ctrl</keycap> <keycap>Left Alt</keycap> "
"<keycap>F1</keycap> </keycombo>."
msgstr ""

#. Tag: title
#: random-bits.xml:1057
#, no-c-format
msgid "Known issues"
msgstr ""

#. Tag: para
#: random-bits.xml:1058
#, no-c-format
msgid ""
"Etch is the first release that includes the graphical installer and uses "
"some relatively new technology. There are a few known issues that you may "
"run into during the installation. We expect to be able to fix these issues "
"for the next release of &debian;."
msgstr ""

#. Tag: para
#: random-bits.xml:1068
#, no-c-format
msgid ""
"Information on some screens is not nicely formatted into columns as it "
"should be. The most obvious example is the first screen where you select "
"your language. Another example is the main screen of partman."
msgstr ""

#. Tag: para
#: random-bits.xml:1075
#, no-c-format
msgid ""
"Typing some characters may not work and in some cases the wrong character "
"may be printed. For example, \"composing\" a character by typing an accent "
"and then the letter over/under which the accent should appear does not work."
msgstr ""

#. Tag: para
#: random-bits.xml:1082
#, no-c-format
msgid "Support for touchpads is not yet optimal."
msgstr ""

#. Tag: para
#: random-bits.xml:1087
#, no-c-format
msgid ""
"You should not switch to a different console while the installer is busy; "
"this may cause the frontend to crash. The frontend will be restarted "
"automatically, but this may still cause problems with the installation. "
"Switching to another console while the installer is waiting for input should "
"work without causing any problems."
msgstr ""

#. Tag: para
#: random-bits.xml:1096
#, no-c-format
msgid ""
"Support for creating encrypted partitions is limited as it is not possible "
"to generate a random encryption key. It is possible to set up an encrypted "
"partition using a passphrase as encryption key."
msgstr ""

#~ msgid "Desktop"
#~ msgstr "데스크탑"

#, fuzzy
#~ msgid "<entry>418</entry>"
#~ msgstr "<entry>48</entry>"

#, fuzzy
#~ msgid "<entry>16</entry>"
#~ msgstr "<entry>168</entry>"

#, fuzzy
#~ msgid "<entry>62</entry>"
#~ msgstr "<entry>2</entry>"

#, fuzzy
#~ msgid "<entry>326</entry>"
#~ msgstr "<entry>36</entry>"

#~ msgid "<entry>71</entry>"
#~ msgstr "<entry>71</entry>"

#~ msgid ""
#~ "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
#~ "replaceable>"
#~ msgstr ""
#~ "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
#~ "replaceable>"

#~ msgid ""
#~ "Now you've got a real Debian system, though rather lean, on disk. "
#~ "<command>Chroot</command> into it:"
#~ msgstr ""
#~ "이제 디스크에 작지만 진짜 데비안 시스템이 들어 있습니다. 이 데비안 시스템"
#~ "으로 <command>chroot</command>하십시오:"

#~ msgid "# LANG= chroot /mnt/debinst /bin/bash"
#~ msgstr "# LANG= chroot /mnt/debinst /bin/bash"

#~ msgid "To configure your keyboard:"
#~ msgstr "키보드를 설정하려면:"

#~ msgid "Configure Locales"
#~ msgstr "로케일 설정하기"

#~ msgid "1392"
#~ msgstr "1392"

#~ msgid "1852"
#~ msgstr "1852"

#~ msgid "<entry>12</entry>"
#~ msgstr "<entry>12</entry>"

#~ msgid "<entry>226</entry>"
#~ msgstr "<entry>226</entry>"

#~ msgid "<entry>47</entry>"
#~ msgstr "<entry>47</entry>"

#~ msgid "<entry>10</entry>"
#~ msgstr "<entry>10</entry>"

#~ msgid "<entry>66</entry>"
#~ msgstr "<entry>66</entry>"

#~ msgid "<entry>87</entry>"
#~ msgstr "<entry>87</entry>"

#~ msgid ""
#~ "Note that running <command>debootstrap</command> may require you to have "
#~ "a minimal version of <classname>glibc</classname> installed (currently "
#~ "GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but "
#~ "it calls various utilities that require <classname>glibc</classname>."
#~ msgstr ""
#~ "<command>debootstrap</command>을 실행하려면 <classname>glibc</classname>"
#~ "의 최소한의 버전은 (현재 GLIBC_2.3) 있어야 합니다. <command>debootstrap</"
#~ "command> 자체는 쉘 스크립트이지만, 이 스크립트에서 glibc가 있어야 하는 여"
#~ "러 가지 유틸리티를 실행합니다."