# Hungarian translation of Debian Installation Guide install-methods # SZERVÁC Attila , 2006. # msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2012-06-16 09:12+0000\n" "PO-Revision-Date: 2007-03-18 18:13+0100\n" "Last-Translator: SZERVÁC Attila \n" "Language-Team: Hungarian \n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Country: HUNGARY\n" "X-Poedit-Language: Hungarian\n" #. Tag: title #: install-methods.xml:5 #, no-c-format msgid "Obtaining System Installation Media" msgstr "A rendszer telepítő média elérése" #. Tag: title #: install-methods.xml:12 #, no-c-format msgid "Official &debian-gnu; CD-ROM Sets" msgstr "Hivatalos &debian-gnu; CD-ROM készletek" #. Tag: para #: install-methods.xml:13 #, fuzzy, no-c-format msgid "" "By far the easiest way to install &debian-gnu; is from an Official &debian; " "CD-ROM Set. You can buy a set from a vendor (see the CD vendors page). You may also download the CD-" "ROM images from a &debian; mirror and make your own set, if you have a fast " "network connection and a CD burner (see the Debian CD page for detailed instructions). If you have a &debian; " "CD set and CDs are bootable on your machine, you can skip right to ; much effort has been expended to ensure the " "files most people need are there on the CD. Although a full set of binary " "packages requires several CDs, it is unlikely you will need packages on the " "third CD and above. You may also consider using the DVD version, which saves " "a lot of space on your shelf and you avoid the CD shuffling marathon." msgstr "" "A &debian-gnu; legegyszerűbb telepítése a Hivatalos &debian; CD-ROM Készlet " "segítségével lehetséges. Ez boltban is megvásárolható (lásd a CD-forgalmazók oldalát). A CD-ROM képek " "letölthetők egy &debian; tükörről is, így egy közepes hálózati kapcsolattal " "és egy CD-íróval a CD-ROM készlet egyénileg is elkészíthető." #. Tag: para #: install-methods.xml:30 #, fuzzy, no-c-format #| msgid "" #| "If your machine doesn't support CD booting, but you do have a CD set, you " #| "can use an alternative strategy such as floppy disk, tape, emulated " #| "tape, hard disk, " #| "usb stick, net boot, or manually loading the kernel from " #| "the CD to initially boot the system installer. The files you need for " #| "booting by another means are also on the CD; the Debian network archive " #| "and CD folder organization are identical. So when archive file paths are " #| "given below for particular files you need for booting, look for those " #| "files in the same directories and subdirectories on your CD." msgid "" "If your machine doesn't support CD booting, but you do have a CD set, you " "can use an alternative strategy such as floppy disk, tape, emulated tape, hard disk, usb stick, net boot, or manually loading the kernel from the CD to " "initially boot the system installer. The files you need for booting by " "another means are also on the CD; the &debian; network archive and CD folder " "organization are identical. So when archive file paths are given below for " "particular files you need for booting, look for those files in the same " "directories and subdirectories on your CD." msgstr "" "Ha a géped nem támogatja a CD lemezről indítást, noha van CD készleted, más " "módszerek is léteznek például: flopi lemez, szalag, emulált szalag, merevlemez, usb tár, hálózati indítás, vagy a kernel kézi betöltése a CD lemezről " "a rendszer telepítő indításához. A más módszerű indításhoz szükséges fájlok " "is rajta vannak a CD lemezen; a &debian; hálózati archívum és a CD mappa-" "szervezése egyezik. Így, mikor alább az indításhoz szükséges archívum fájl " "ösvényeket látod, e fájlok a CD egyező könyvtáraiban és alkönyvtáraiban " "vannak." #. Tag: para #: install-methods.xml:52 #, no-c-format msgid "" "Once the installer is booted, it will be able to obtain all the other files " "it needs from the CD." msgstr "Mihelyst a telepítő elindult, minden fájlt megtalál a CD lemezen." #. Tag: para #: install-methods.xml:57 #, no-c-format msgid "" "If you don't have a CD set, then you will need to download the installer " "system files and place them on the installation tape floppy disk or " "hard disk or usb stick or a " "connected computer so they can be used to boot the installer." msgstr "" "Ha nincs CD-készleted, le kell töltened a telepítő rendszer fájlokat és " "elhelyezni őket a telepítő szalagon flopi lemezen vagy merevlemezen vagy usb táron vagy egy kapcsolódó gépen így erről indítható a telepítő." #. Tag: title #: install-methods.xml:83 #, no-c-format msgid "Downloading Files from &debian; Mirrors" msgstr "Fájlok letöltése a &debian; Tükrökről" #. Tag: para #: install-methods.xml:85 #, no-c-format msgid "" "To find the nearest (and thus probably the fastest) mirror, see the list of &debian; mirrors." msgstr "" "A legközelebbi (és alighanem leggyorsabb) tükör megtalálásához lásd a Debian tükrök listáját." #. Tag: para #: install-methods.xml:90 #, fuzzy, no-c-format #| msgid "" #| "When downloading files from a Debian mirror, be sure to download the " #| "files in binary mode, not text or automatic mode." msgid "" "When downloading files from a &debian; mirror using FTP, be sure to download " "the files in binary mode, not text or automatic mode." msgstr "" "Fájlok letöltésekor egy &debian; tükörről ügyelj, hogy az mindig " "bináris módban történjen, ne szöveges vagy automata " "módban." #. Tag: title #: install-methods.xml:98 #, no-c-format msgid "Where to Find Installation Images" msgstr "A telepítő képek fellelése" #. Tag: para #: install-methods.xml:100 #, no-c-format msgid "" "The installation images are located on each &debian; mirror in the directory " "debian/dists/&releasename;/main/" "installer-&architecture;/current/images/ — the MANIFEST lists each image " "and its purpose." msgstr "" "A telepítő képek minden &debian; tükrön a debian/dists/&releasename;/main/installer-&architecture;/current/" "images/ könyvtárban vannak — a MANIFEST fájl felsorolja őket és " "céljaikat." #. Tag: title #: install-methods.xml:113 #, fuzzy, no-c-format #| msgid "NSLU2 Installation Files" msgid "Thecus N2100 Installation Files" msgstr "NSLU2 telepítő fájlok" #. Tag: para #: install-methods.xml:114 #, fuzzy, no-c-format #| msgid "" #| "A firmware image is provided for the Linksys NSLU2 which will " #| "automatically boot debian-installer. This firmware " #| "image can be obtained from &nslu2-firmware-img;." msgid "" "A firmware image is provided for the Thecus N2100 which will automatically " "boot debian-installer. This image can be installed " "using the Thecus firmware upgrade process. This firmware image can be " "obtained from &n2100-firmware-img;." msgstr "" "Egy firmware képfájl áll rendelkezésre, mely automatikusan elindítja a " "debian-installer-t. A képfájl innen szerezhető be: " "&nslu2-firmware-img;." #. Tag: title #: install-methods.xml:125 #, fuzzy, no-c-format #| msgid "CATS Installation Files" msgid "GLAN Tank Installation Files" msgstr "CATS telepítő fájlok" #. Tag: para #: install-methods.xml:126 #, no-c-format msgid "" "The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk " "on which you intend to install &debian;. These images can be obtained from " "&glantank-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:136 #, fuzzy, no-c-format #| msgid "RiscPC Installation Files" msgid "Kurobox Pro Installation Files" msgstr "RiscPC telepítő fájlok" #. Tag: para #: install-methods.xml:137 #, no-c-format msgid "" "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the " "disk on which you intend to install &debian;. These images can be obtained " "from &kuroboxpro-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:147 #, fuzzy, no-c-format #| msgid "NSLU2 Installation Files" msgid "HP mv2120 Installation Files" msgstr "NSLU2 telepítő fájlok" #. Tag: para #: install-methods.xml:148 #, fuzzy, no-c-format #| msgid "" #| "A firmware image is provided for the Linksys NSLU2 which will " #| "automatically boot debian-installer. This firmware " #| "image can be obtained from &nslu2-firmware-img;." msgid "" "A firmware image is provided for the HP mv2120 which will automatically boot " "debian-installer. This image can be installed with " "uphpmvault on Linux and other systems and with the HP Media Vault Firmware " "Recovery Utility on Windows. The firmware image can be obtained from &mv2120-" "firmware-img;." msgstr "" "Egy firmware képfájl áll rendelkezésre, mely automatikusan elindítja a " "debian-installer-t. A képfájl innen szerezhető be: " "&nslu2-firmware-img;." #. Tag: title #: install-methods.xml:160 #, fuzzy, no-c-format #| msgid "CATS Installation Files" msgid "QNAP Turbo Station Installation Files" msgstr "CATS telepítő fájlok" #. Tag: para #: install-methods.xml:161 #, no-c-format msgid "" "The installation files for the QNAP Turbo Station consist of a kernel and " "ramdisk as well as a script to write these images to flash. You can obtain " "the installation files for QNAP TS-11x, TS-21x and TS-41x models from &qnap-" "kirkwood-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:172 #, fuzzy, no-c-format #| msgid "Netwinder Installation Files" msgid "Plug Computer and OpenRD Installation Files" msgstr "Netwinder telepítő fájlok" #. Tag: para #: install-methods.xml:173 #, no-c-format msgid "" "The installation files for plug computers (SheevaPlug, GuruPlug, etc) and " "OpenRD devices consist of a kernel and initrd for U-Boot. You can obtain " "these files from &kirkwood-marvell-firmware-img;." msgstr "" #. Tag: title #: install-methods.xml:223 #, no-c-format msgid "Creating an IPL tape" msgstr "" #. Tag: para #: install-methods.xml:225 #, no-c-format msgid "" "If you can't boot (IPL) from the CD-ROM and you are not using VM you need to " "create an IPL tape first. This is described in section 3.4.3 in the Linux " "for IBM eServer zSeries and S/390: Distributions Redbook. The files " "you need to write to the tape are (in this order): kernel.debian, parmfile.debian and initrd.debian. The files can be downloaded from the tape " "sub-directory, see ." msgstr "" #. Tag: title #: install-methods.xml:249 #, no-c-format msgid "Creating Floppies from Disk Images" msgstr "Flopik készítése lemez képekből" #. Tag: para #: install-methods.xml:250 #, no-c-format msgid "" "Bootable floppy disks are generally used as a last resort to boot the " "installer on hardware that cannot boot from CD or by other means." msgstr "" "A flopi lemezek a végső esetek a telepítő indítására azon gépeken, melyek " "nem tudnak CD-lemezekről vagy más módon indulni." #. Tag: para #: install-methods.xml:255 #, no-c-format msgid "" "Booting the installer from floppy disk reportedly fails on Mac USB floppy " "drives." msgstr "" "A telepítő a Mac USB flopi meghajtók nem tudják flopi lemezről indítani." #. Tag: para #: install-methods.xml:260 #, no-c-format msgid "" "Disk images are files containing the complete contents of a floppy disk in " "raw form. Disk images, such as boot.img, cannot simply be copied to floppy drives. A special program is " "used to write the image files to floppy disk in raw " "mode. This is required because these images are raw representations of the " "disk; it is required to do a sector copy of the data " "from the file onto the floppy." msgstr "" "A lemez képek egy flopi lemez teljes tartalmát tárolják nyers formában. Ezek, például a boot.img flopi " "lemezekre másolása módja nem a szokásos. Nyers módban " "írjuk ki őket különleges programokkal. Ez szükséges, mert e képek a lemez " "nyers leképezései; ezért az adatoknak szektor másolás " "útján kell a flopira kerülniük." #. Tag: para #: install-methods.xml:271 #, no-c-format msgid "" "There are different techniques for creating floppies from disk images. This " "section describes how to create floppies from disk images on different " "platforms." msgstr "" "Különböző technikák vannak flopik írására lemez képekből. E szakasz leírja " "ezeket a különböző platformokon." #. Tag: para #: install-methods.xml:277 #, no-c-format msgid "" "Before you can create the floppies, you will first need to download them " "from one of the &debian; mirrors, as explained in . If you already have an " "installation CD-ROM or DVD, the floppy images may also be included on the CD/" "DVD." msgstr "" "Flopik létrehozása előtt le kell töltened őket egy &debian; tükörről, ahogy " "itt írjuk: . Ha " "rendelkezel telepítő CD-ROM vagy DVD lemezzel, a floppi képek rajta vannak." #. Tag: para #: install-methods.xml:285 #, no-c-format msgid "" "No matter which method you use to create your floppies, you should remember " "to flip the write-protect tab on the floppies once you have written them, to " "ensure they are not damaged unintentionally." msgstr "" "Bármely módszerrel teszed ezt, miután megírtad őket, érdemes írás-védő " "füleiket átváltani véletlen felülírásuk ellen." #. Tag: title #: install-methods.xml:293 #, no-c-format msgid "Writing Disk Images From a Linux or Unix System" msgstr "Lemez képek írása Linux vagy Unix rendszerből" #. Tag: para #: install-methods.xml:294 #, no-c-format msgid "" "To write the floppy disk image files to the floppy disks, you will probably " "need root access to the system. Place a good, blank floppy in the floppy " "drive. Next, use the command \n" "$ dd if=filename of=/dev/fd0 bs=1024 conv=sync ; " "sync\n" " where filename is one " "of the floppy disk image files. /dev/fd0 is a commonly " "used name of the floppy disk device, it may be different on your " "workstation (on Solaris, it is /dev/fd/0). The command may return to the prompt before Unix has " "finished writing the floppy disk, so look for the disk-in-use light on the " "floppy drive and be sure that the light is out and the disk has stopped " "revolving before you remove it from the drive. On some systems, you'll have " "to run a command to eject the floppy from the drive " "(on Solaris, use eject, see the manual page)." msgstr "" "Flopi lemez képek írásához flopi lemezekre, valószínűleg root hozzáférésre " "lesz szükség a rendszeren. Tégy egy jó, üres flopit a flopi meghajtóba. " "Ezután használd ezt a parancsot: \n" "$ dd if=fájlnév of=/dev/fd0 bs=1024 conv=sync ; " "sync\n" "ahol a fájlnév a flopi " "lemez képek egyike. A /dev/fd0 a flopi lemez eszköz egy " "általánosan használt neve, mely eltérhet az adott gépen (, Solaris rendszeren /dev/fd/0). A parancs " "lehet, hogy visszaadja a beviteli jelet, mielőtt a Unix befejezi a flopi " "lemez írását, ezért nézd a flopi lámpáját, győződj meg, hogy kialudt és a " "lemez forgása leállt, mielőtt kiveszed a meghajtóból. Egyes rendszereken egy " "parancs futtatható a flopi kiadására a meghajtóból (, " "Solaris rendszeren használd az eject parancsot, lásd a " "kézikönyv oldalt)." #. Tag: para #: install-methods.xml:315 #, no-c-format msgid "" "Some systems attempt to automatically mount a floppy disk when you place it " "in the drive. You might have to disable this feature before the workstation " "will allow you to write a floppy in raw mode. " "Unfortunately, how to accomplish this will vary based on your operating " "system. On Solaris, you can work around volume " "management to get raw access to the floppy. First, make sure that the floppy " "is auto-mounted (using volcheck or the equivalent command " "in the file manager). Then use a dd command of the form " "given above, just replace /dev/fd0 with /vol/" "rdsk/floppy_name, where " "floppy_name is the name the floppy disk was given " "when it was formatted (unnamed floppies default to the name " "unnamed_floppy). On other systems, ask your system " "administrator. " msgstr "" "Egyes rendszerek automatikusan csatolják a flopi lemezt, mikor beteszed a " "meghajtóba. Ezt ki kell kapcsolni a flopi nyers módban " "írásához. Solaris rendszeren a kötet kezelés " "állításával kapható nyers hozzá.férés a flopihoz Először győződj meg a flopi " "automatikusan csatolt voltáról (használd a volcheck vagy " "a fájlkezelő megfelelő parancsát). Majd használd a dd " "parancsot a fenti formában, csak cseréld a /dev/fd0 " "nevet erre: /vol/rdsk/floppy_név, ahol a floppy_név a flopi lemez " "formázáskor adott neve (a névtelen flopi alap neve " "névtelen_floppy). Más rendszereken a rendszergazda " "minden apró részletet tud. " #. Tag: para #: install-methods.xml:336 #, no-c-format msgid "" "If writing a floppy on powerpc Linux, you will need to eject it. The " "eject program handles this nicely; you might need to " "install it." msgstr "" "Flopi írásakor powerpc Linuxon, ki kell adni azt. Az eject parancs megteszi ezt; legyen telepítve." #. Tag: title #: install-methods.xml:354 #, no-c-format msgid "Writing Disk Images From DOS, Windows, or OS/2" msgstr "Lemez képek írása DOSban, Windows vagy OS/2 alatt" #. Tag: para #: install-methods.xml:356 #, no-c-format msgid "" "If you have access to an i386 or amd64 machine, you can use one of the " "following programs to copy images to floppies." msgstr "" "i386 vagy amd64 gépen az alábbi programok egyikét használhatod flopi-képek " "kiírásához." #. Tag: para #: install-methods.xml:361 #, no-c-format msgid "" "The rawrite1 and rawrite2 programs can " "be used under MS-DOS. To use these programs, first make sure that you are " "booted into DOS. Trying to use these programs from within a DOS box in " "Windows, or double-clicking on these programs from the Windows Explorer is " "not expected to work." msgstr "" "A rawrite1 és rawrite2 programok MS-" "DOSban használhatók. E programok használatához, győződj meg, hogy DOSban " "vagy. E programok használata DOS dobozból Windowsban, vagy e programok " "indítása Windows Explorerból nem működik." #. Tag: para #: install-methods.xml:369 #, no-c-format msgid "" "The rwwrtwin program runs on Windows 95, NT, 98, 2000, " "ME, XP and probably later versions. To use it you will need to unpack diskio." "dll in the same directory." msgstr "" "Az rwwrtwin megy w95, NT, 98, 2k, ME, XP és még az újabb " "2k3, sőt talán még a legújabb verziókkal is. Használatához szükséged lesz a " "diskio.dll fájlra is, csomagold ki ugyanabba a könyvtárba." #. Tag: para #: install-methods.xml:375 #, no-c-format msgid "" "These tools can be found on the Official &debian; CD-ROMs under the " "/tools directory." msgstr "" "Ezek az eszközök a Hivatalos &debian; CD-ROM lemezek /tools könyvtárában is megtalálhatók." #. Tag: title #: install-methods.xml:388 #, no-c-format msgid "Writing Disk Images From MacOS" msgstr "" #. Tag: para #: install-methods.xml:389 #, no-c-format msgid "" "An AppleScript, Make &debian; Floppy, is " "available for burning floppies from the provided disk image files. It can be " "downloaded from . To use it, just unstuff it on " "your desktop, and then drag any floppy image file to it. You must have " "Applescript installed and enabled in your extensions manager. Disk Copy will " "ask you to confirm that you wish to erase the floppy and proceed to write " "the file image to it." msgstr "" #. Tag: para #: install-methods.xml:400 #, no-c-format msgid "" "You can also use the MacOS utility Disk Copy directly, or " "the freeware utility suntar. The root.bin file is an example of a floppy image. Use one of the following " "methods to create a floppy from the floppy image with these utilities." msgstr "" #. Tag: title #: install-methods.xml:411 #, no-c-format msgid "Writing Disk Images with Disk Copy" msgstr "" #. Tag: para #: install-methods.xml:412 #, no-c-format msgid "" "If you are creating the floppy image from files which were originally on the " "official &debian-gnu; CD, then the Type and Creator are already set " "correctly. The following Creator-Changer steps are only " "necessary if you downloaded the image files from a &debian; mirror." msgstr "" #. Tag: para #: install-methods.xml:421 #, no-c-format msgid "" "Obtain Creator-Changer " "and use it to open the root.bin file." msgstr "" #. Tag: para #: install-methods.xml:428 #, no-c-format msgid "" "Change the Creator to ddsk (Disk Copy), and the Type " "to DDim (binary floppy image). The case is sensitive " "for these fields." msgstr "" #. Tag: para #: install-methods.xml:435 #, no-c-format msgid "" "Important: In the Finder, use Get Info to display the Finder information about the floppy image, and " "X the File Locked check box so that " "MacOS will be unable to remove the boot blocks if the image is accidentally " "mounted." msgstr "" #. Tag: para #: install-methods.xml:444 #, no-c-format msgid "" "Obtain Disk Copy; if you have a MacOS system or CD it " "will very likely be there already, otherwise try ." msgstr "" #. Tag: para #: install-methods.xml:451 #, no-c-format msgid "" "Run Disk Copy, and select " "Utilities Make a Floppy , then select the locked image file from the " "resulting dialog. It will ask you to insert a floppy, then ask if you really " "want to erase it. When done it should eject the floppy." msgstr "" #. Tag: title #: install-methods.xml:466 #, no-c-format msgid "Writing Disk Images with suntar" msgstr "Lemez képek írása a suntar programmal" #. Tag: para #: install-methods.xml:470 #, no-c-format msgid "" "Obtain suntar from . Start the suntar program and select " "Overwrite Sectors... from the Special " "menu." msgstr "" "Töltsd le a suntar programot innen: . Indítsd a suntar-t és " "válaszd ezt: Szektorok felülírása... a Speciális menüből." #. Tag: para #: install-methods.xml:478 #, no-c-format msgid "" "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)." msgstr "" "Tedd be a flopi lemezt, és üsd le az &enterkey; billentyűt (indíts a 0. " "szektorról)." #. Tag: para #: install-methods.xml:484 #, no-c-format msgid "" "Select the root.bin file in the file-opening dialog." msgstr "" "Válaszd a root.bin fájlt a fájl-megnyitó párbeszédben." #. Tag: para #: install-methods.xml:489 #, no-c-format msgid "" "After the floppy has been created successfully, select " "File Eject . If " "there are any errors writing the floppy, simply toss that floppy and try " "another." msgstr "" "A flopi sikeres létrehozása után válaszd ki a Fájl Kiadás pontot a menüben. " "Ha gondok vannak a flopi írásakor, dobd el és próbál másikat." #. Tag: para #: install-methods.xml:497 #, no-c-format msgid "" "Before using the floppy you created, set the write protect tab! Otherwise if you accidentally mount it in MacOS, MacOS will " "helpfully ruin it." msgstr "" "A létrehozott flopi használata előtt állítsd be az írás-védő " "fület! Különben, ha véletlenül csatolod MacOSban, az hazavágja." #. Tag: title #: install-methods.xml:516 #, no-c-format msgid "Preparing Files for USB Memory Stick Booting" msgstr "Fájlok előkészítése USB tároló indításhoz" #. Tag: para #: install-methods.xml:518 #, fuzzy, no-c-format #| msgid "" #| "To prepare the USB stick, you will need a system where GNU/Linux is " #| "already running and where USB is supported. You should ensure that the " #| "usb-storage kernel module is loaded (modprobe usb-storage) and try to find out which SCSI device the USB stick has been " #| "mapped to (in this example /dev/sda is used). To " #| "write to your stick, you may have to turn off its write protection switch." msgid "" "To prepare the USB stick, you will need a system where GNU/Linux is already " "running and where USB is supported. With current GNU/Linux systems the USB " "stick should be automatically recognized when you insert it. If it is not " "you should check that the usb-storage kernel module is loaded. When the USB " "stick is inserted, it will be mapped to a device named /dev/sdX, where the X is a letter in the range a-z. You " "should be able to see to which device the USB stick was mapped by running " "the command dmesg after inserting it. To write to your " "stick, you may have to turn off its write protection switch." msgstr "" "Egy USB tároló előkészítése egy USB támogató, GNU/Linux alatt futó " "rendszerrel lehetséges. Győződj meg, hogy az usb-storage modul be van-e " "töltve (modprobe usb-storage) és tudd, hogy az USB " "tár mely SCSI eszközön került leképezésre (e példában a szokásos /" "dev/sda eszközre hivatkozunk). Természetesen a tároló írás-védője " "legyen kikapcsolva." #. Tag: para #: install-methods.xml:531 #, fuzzy, no-c-format #| msgid "" #| "Using this method will destroy anything already on the device. Make sure " #| "that you use the correct device name for your USB stick." msgid "" "The procedures described in this section will destroy anything already on " "the device! Make very sure that you use the correct device name for your USB " "stick. If you use the wrong device the result could be that all information " "on for example a hard disk could be lost." msgstr "" "E módszer töröl minden korábbit az eszközön. Figyelj oda, hogy a helyes " "eszköz-nevet használod." #. Tag: title #: install-methods.xml:541 #, no-c-format msgid "Preparing a USB stick using a hybrid CD or DVD image" msgstr "" #. Tag: para #: install-methods.xml:542 #, no-c-format msgid "" "Debian CD and DVD images can now be written directly a USB stick, which is a " "very easy way to make a bootable USB stick. Simply choose a CD or DVD image " "that will fit on your USB stick. See to " "get a CD or DVD image." msgstr "" #. Tag: para #: install-methods.xml:549 #, no-c-format msgid "" "Alternatively, for very small USB sticks, only a few megabytes in size, you " "can download the mini.iso image from the " "netboot directory (at the location mentioned in )." msgstr "" #. Tag: para #: install-methods.xml:557 #, no-c-format msgid "" "A special method can be used to add firmware to the mini.iso. First, write the mini.iso to the USB stick. " "Next obtain the necessary firmware files. See for more information about firmware. Now unplug and replug the " "USB stick, and two partitions should now be visible on it. You should mount " "the second of the two partitions, and unpack the firmware onto it." msgstr "" #. Tag: screen #: install-methods.xml:567 #, no-c-format msgid "" "# mount /dev/sdX2 /mnt\n" "# cd /mnt\n" "# tar zxvf /path/to/firmware.tar.gz\n" "# cd /\n" "# umount" msgstr "" #. Tag: para #: install-methods.xml:573 #, no-c-format msgid "" "The CD or DVD image you choose should be written directly to the USB stick, " "overwriting its current contents. For example, when using an existing GNU/" "Linux system, the CD or DVD image file can be written to a USB stick as " "follows, after having made sure that the stick is unmounted:" msgstr "" #. Tag: screen #: install-methods.xml:580 #, no-c-format msgid "" "# cp debian.iso /dev/" "sdX\n" "# sync" msgstr "" #. Tag: para #: install-methods.xml:582 #, no-c-format msgid "" "Simply writing the CD or DVD image to USB like this should work fine for " "most users. The other options below are more complex, mainly for people with " "specialised needs." msgstr "" #. Tag: title #: install-methods.xml:593 #, fuzzy, no-c-format #| msgid "Booting the USB stick" msgid "Manually copying files to the USB stick" msgstr "Az USB tár indítása" #. Tag: para #: install-methods.xml:594 #, fuzzy, no-c-format #| msgid "" #| "Note that the USB stick should be at least 256 MB in size (smaller setups " #| "are possible if you follow )." msgid "" "An alternative way to set up your USB stick is to manually copy the " "installer files, and also a CD image to it. Note that the USB stick should " "be at least 1 GB in size (smaller setups are possible if you follow )." msgstr "" "A tároló mérete legalább 256 MB legyen (a kisebb telepítések is lehetségesek " "a rész szerint)." #. Tag: para #: install-methods.xml:601 #, fuzzy, no-c-format #| msgid "" #| "There is an all-in-one file hd-media/boot.img.gz " #| "which contains all the installer files (including the kernel) as well as " #| "SYSLINUX and its configuration file. You only have to " #| "extract it directly to your USB stick:" msgid "" "There is an all-in-one file hd-media/boot.img.gz which " "contains all the installer files (including the kernel) as well as syslinux and its configuration " "file as well as yaboot and its configuration file." msgstr "" "Van egy minden-egyben hd-media/boot.img.gz fájl, benne " "az összes telepítő fájl (a kernel is), a SYSLINUX és " "beállító fájlja. Csak ki kell bontani az USB tárra:" #. Tag: para #: install-methods.xml:610 #, no-c-format msgid "" "Note that, although convenient, this method does have one major " "disadvantage: the logical size of the device will be limited to 1 GB, even " "if the capacity of the USB stick is larger. You will need to repartition the " "USB stick and create new file systems to get its full capacity back if you " "ever want to use it for some different purpose." msgstr "" #. Tag: para #: install-methods.xml:618 #, no-c-format msgid "To use this image simply extract it directly to your USB stick:" msgstr "" #. Tag: screen #: install-methods.xml:622 #, fuzzy, no-c-format #| msgid "# zcat boot.img.gz > /dev/sda" msgid "# zcat boot.img.gz > /dev/sdX" msgstr "# zcat boot.img.gz > /dev/sda" #. Tag: para #: install-methods.xml:624 #, fuzzy, no-c-format #| msgid "" #| "There is an all-in-one file hd-media/boot.img.gz " #| "which contains all the installer files (including the kernel) as well as " #| "yaboot and its configuration file. Create a partition " #| "of type \"Apple_Bootstrap\" on your USB stick using mac-fdisk's C command and extract the image " #| "directly to that:" msgid "" "Create a partition of type \"Apple_Bootstrap\" on your USB stick using " "mac-fdisk's C command and extract " "the image directly to that:" msgstr "" "Van egy minden-egyben hd-media/boot.img.gz fájl, benne " "az összes telepítő fájl (a kernel is), a yaboot és " "beállító fájlja. Készíts egy \"Apple_Bootstrap\" partíciót az USB táron a " "mac-fdisk C parancsával és bontsd " "ki rá a képet így:" #. Tag: screen #: install-methods.xml:630 #, fuzzy, no-c-format #| msgid "# zcat boot.img.gz > /dev/sda2" msgid "# zcat boot.img.gz > /dev/sdX2" msgstr "# zcat boot.img.gz > /dev/sda2" #. Tag: para #: install-methods.xml:632 #, fuzzy, no-c-format #| msgid "" #| "After that, mount the USB memory stick (mount /dev/sda /dev/" #| "sda2 /mnt), which will now have a FAT filesystem an HFS " #| "filesystem on it, and copy a Debian netinst or businesscard ISO " #| "image to it (see ). Unmount the stick " #| "(umount /mnt) and you are done." msgid "" "After that, mount the USB memory stick " "(mount /dev/sdX /mnt), (mount /dev/sdX2 /mnt), which will now have a FAT filesystem an HFS " "filesystem on it, and copy a &debian; ISO image (netinst, " "businesscard, or full CD) to it. Unmount the stick (umount /mnt) and you are done." msgstr "" "Ezután csatold fel az USB tárolót (mount /dev/sda /dev/sda2 /mnt), melyen most egy FAT " "fájlrendszer egy HFS fájlrendszer " "van, és másolj rá egy &debian; netinst vagy businesscard ISO képet (lásd " "ezt: ). Csatold le (umount /mnt) és kész." #. Tag: title #: install-methods.xml:649 #, fuzzy, no-c-format #| msgid "Copying the files — the flexible way" msgid "Manually copying files to the USB stick — the flexible way" msgstr "Fájlok másolása — a rugalmas mód" #. Tag: para #: install-methods.xml:650 #, fuzzy, no-c-format #| msgid "" #| "If you like more flexibility or just want to know what's going on, you " #| "should use the following method to put the files on your stick." msgid "" "If you like more flexibility or just want to know what's going on, you " "should use the following method to put the files on your stick. One " "advantage of using this method is that — if the capacity of your USB " "stick is large enough — you have the option of copying a full CD ISO " "image to it." msgstr "" "Ha nagyobb rugalmasságot akarsz vagy követni pontosan az eseményeket, az " "alábbi módszer is használható." #. Tag: title #: install-methods.xml:665 install-methods.xml:777 #, fuzzy, no-c-format #| msgid "Booting the USB stick" msgid "Partitioning the USB stick" msgstr "Az USB tár indítása" #. Tag: para #: install-methods.xml:666 #, no-c-format msgid "" "We will show how to set up the memory stick to use the first partition, " "instead of the entire device." msgstr "" "Bemutatjuk egy memória tár 1. partíciójának használatát az egész eszköz " "helyett." #. Tag: para #: install-methods.xml:671 #, fuzzy, no-c-format #| msgid "" #| "Since most USB sticks come pre-configured with a single FAT16 partition, " #| "you probably won't have to repartition or reformat the stick. If you have " #| "to do that anyway, use cfdisk or any other " #| "partitioning tool to create a FAT16 partition, and then create the " #| "filesystem using: \n" #| "# mkdosfs /dev/sda1\n" #| " Take care that you use the correct device " #| "name for your USB stick. The mkdosfs command is " #| "contained in the dosfstools Debian package." msgid "" "Since most USB sticks come pre-configured with a single FAT16 partition, you " "probably won't have to repartition or reformat the stick. If you have to do " "that anyway, use cfdisk or any other partitioning tool to " "create a FAT16 partition Don't forget to set the " "bootable bootable flag. , and then create " "the filesystem using: \n" "# mkdosfs /dev/sdX1\n" " Take care that you use the correct device name " "for your USB stick. The mkdosfs command is contained in " "the dosfstools &debian; package." msgstr "" "Mivel bármilyen furcsa a legtöbb USB memórián eleve egy FAT16 partíció van, " "így nem biztos, hogy újra kell particionálnod, vagy formázni azt. Ha viszont " "ezt szeretnéd, használd a cfdisk vagy bármely más " "particionáló eszközt FAT16 partíció létrehozásához, majd hozd létre a " "fájlrendszert így: \n" "# mkdosfs /dev/sda1\n" " Figyelj, hogy helyesen add meg az eszköz nevét. " "Az mkdosfs a dosfstools &debian; " "csomagban van." #. Tag: para #: install-methods.xml:690 #, fuzzy, no-c-format #| msgid "" #| "In order to start the kernel after booting from the USB stick, we will " #| "put a boot loader on the stick. Although any boot loader (e.g. " #| "LILO) should work, it's convenient to use " #| "SYSLINUX, since it uses a FAT16 partition and can be " #| "reconfigured by just editing a text file. Any operating system which " #| "supports the FAT file system can be used to make changes to the " #| "configuration of the boot loader." msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. Although any boot loader (e.g. lilo) should work, it's convenient to use syslinux, since it uses a FAT16 partition and can be reconfigured by just " "editing a text file. Any operating system which supports the FAT file system " "can be used to make changes to the configuration of the boot loader." msgstr "" "Hogy a kernel elinduljon az USB tárról indítás után, egy boot betöltőt " "teszünk rá. Noha bármely boot betöltő (például LILO) " "működik, a SYSLINUX kényelmes, mert FAT16 partíciót " "használ és pusztán egy szöveges fájl szerkesztésével állítható. Minden FAT " "fájlrendszert támogató operációs rendszer használható a boot betöltő " "beállításainak módosítására." #. Tag: para #: install-methods.xml:700 #, fuzzy, no-c-format #| msgid "" #| "To put SYSLINUX on the FAT16 partition on your USB " #| "stick, install the syslinux and mtools packages on your system, and do: \n" #| "# syslinux /dev/sda1\n" #| " Again, take care that you use the correct " #| "device name. The partition must not be mounted when starting " #| "SYSLINUX. This procedure writes a boot sector to the " #| "partition and creates the file ldlinux.sys which " #| "contains the boot loader code." msgid "" "To put syslinux on the FAT16 partition on your USB " "stick, install the syslinux and mtools packages on your system, and do: \n" "# syslinux /dev/sdX1\n" " Again, take care that you use the correct device " "name. The partition must not be mounted when starting syslinux. This procedure writes a boot sector to the partition and creates " "the file ldlinux.sys which contains the boot loader " "code." msgstr "" "A SYSLINUX FAT16 partícióra helyezéséhez az USB tárra, " "telepítsd a syslinux és mtools " "csomagokat, majd tedd ezt: \n" "# syslinux /dev/sda1\n" " Figyelj az eszköz nevének helyes voltára. A " "partíció ne legyen csatolva a SYSLINUX indításakor. E " "művelet egy boot szektort ír a partícióra és létrehozza a boot betöltő kódot " "tartalmazó ldlinux.sys fájlt." #. Tag: title #: install-methods.xml:717 install-methods.xml:824 #, fuzzy, no-c-format #| msgid "Adding an ISO image" msgid "Adding the installer image" msgstr "ISO kép hozzáadása" #. Tag: para #: install-methods.xml:718 #, fuzzy, no-c-format #| msgid "" #| "Mount the partition (mount /dev/sda1 /mnt) and " #| "copy the following files from the Debian archives to the stick: " #| " vmlinuz (kernel " #| "binary) initrd.gz (initial ramdisk image) " #| "syslinux.cfg (SYSLINUX configuration file) Optional kernel modules If you want to rename the files, please note that " #| "SYSLINUX can only process DOS (8.3) file names." msgid "" "Mount the partition (mount /dev/sdX1 /" "mnt) and copy the following installer image files to the stick: " " vmlinuz or " "linux (kernel binary) " " initrd.gz (initial ramdisk image) You can choose between either the regular " "version or the graphical version of the installer. The latter can be found " "in the gtk subdirectory. If you want to rename the " "files, please note that syslinux can only process DOS " "(8.3) file names." msgstr "" "Csatold a partíciót (mount /dev/sda1 /mnt) és másold " "az alábbi fájlokat a Debian archívumból az eszközre: " " vmlinuz (kernel bináris) initrd.gz (kezdő ramlemez " "kép) syslinux.cfg " "(SYSLINUX beállító fájl) Esetleges " "kernel modulok Ha átnevezel fájlokat, ne " "feledd, hogy a SYSLINUX csak DOS (8.3) neveket dolgoz fel." #. Tag: para #: install-methods.xml:742 #, fuzzy, no-c-format #| msgid "" #| "The syslinux.cfg configuration file should contain " #| "the following two lines: \n" #| "default vmlinuz\n" #| "append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n" #| " Please note that the ramdisk_size parameter may need to be increased, depending on the image you " #| "are booting." msgid "" "Next you should create a syslinux.cfg configuration " "file, which at a bare minimum should contain the following two lines (change " "the name of the kernel binary to linux " "if you used a netboot image): " "\n" "default vmlinuz\n" "append initrd=initrd.gz\n" " For the graphical installer you should add " "vga=788 to the second line." msgstr "" "A syslinux.cfg beállító fájl az alábbi 2 sort " "tartalmazza: \n" "default vmlinuz\n" "append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n" " Ne feledd, hogy a ramdisk_size paraméter növelése szükséges lehet, az indító képnek megfelelően." #. Tag: para #: install-methods.xml:754 install-methods.xml:864 #, no-c-format msgid "" "If you used an hd-media image, you should now copy the " "ISO file of a &debian; ISO image You can use either a " "businesscard, a netinst or a full CD image (see ). Be sure to select one that fits. Note that the netboot " "mini.iso image is not usable for this purpose. " " onto the stick. When you are done, unmount the USB " "memory stick (umount /mnt)." msgstr "" #. Tag: para #: install-methods.xml:778 #, fuzzy, no-c-format #| msgid "" #| "Since most USB sticks come pre-configured with a single FAT16 partition, " #| "you probably won't have to repartition or reformat the stick. If you have " #| "to do that anyway, use cfdisk or any other " #| "partitioning tool to create a FAT16 partition, and then create the " #| "filesystem using: \n" #| "# mkdosfs /dev/sda1\n" #| " Take care that you use the correct device " #| "name for your USB stick. The mkdosfs command is " #| "contained in the dosfstools Debian package." msgid "" "Most USB sticks do not come pre-configured in such a way that Open Firmware " "can boot from them, so you will need to repartition the stick. On Mac " "systems, run mac-fdisk /dev/sdX, initialise a new partition map using the i command, and create a new partition of type Apple_Bootstrap using " "the C command. (Note that the first \"partition\" " "will always be the partition map itself.) Then type " "\n" "$ hformat /dev/sdX2\n" " Take care that you use the correct device name " "for your USB stick. The hformat command is contained in " "the hfsutils &debian; package." msgstr "" "Mivel bármilyen furcsa a legtöbb USB memórián eleve egy FAT16 partíció van, " "így nem biztos, hogy újra kell particionálnod, vagy formázni azt. Ha viszont " "ezt szeretnéd, használd a cfdisk vagy bármely más " "particionáló eszközt FAT16 partíció létrehozásához, majd hozd létre a " "fájlrendszert így: \n" "# mkdosfs /dev/sda1\n" " Figyelj, hogy helyesen add meg az eszköz nevét. " "Az mkdosfs a dosfstools &debian; " "csomagban van." #. Tag: para #: install-methods.xml:795 #, no-c-format msgid "" "In order to start the kernel after booting from the USB stick, we will put a " "boot loader on the stick. The yaboot boot loader can be " "installed on an HFS filesystem and can be reconfigured by just editing a " "text file. Any operating system which supports the HFS file system can be " "used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para #: install-methods.xml:804 #, no-c-format msgid "" "The normal ybin tool that comes with yaboot does not yet understand USB storage devices, so you will have to " "install yaboot by hand using the hfsutils tools. Type \n" "$ hmount /dev/sdX2\n" "$ hcopy -r /usr/lib/yaboot/yaboot :\n" "$ hattrib -c UNIX -t tbxi :yaboot\n" "$ hattrib -b :\n" "$ humount\n" " Again, take care that you use the correct device " "name. The partition must not be otherwise mounted during this procedure. " "This procedure writes the boot loader to the partition, and uses the HFS " "utilities to mark it in such a way that Open Firmware will boot it. Having " "done this, the rest of the USB stick may be prepared using the normal Unix " "utilities." msgstr "" #. Tag: para #: install-methods.xml:825 #, no-c-format msgid "" "Mount the partition (mount /dev/sdX2 /" "mnt) and copy the following installer image files to the stick:" msgstr "" #. Tag: para #: install-methods.xml:832 #, no-c-format msgid "vmlinux (kernel binary)" msgstr "" #. Tag: para #: install-methods.xml:837 #, no-c-format msgid "initrd.gz (initial ramdisk image)" msgstr "" #. Tag: para #: install-methods.xml:842 #, no-c-format msgid "yaboot.conf (yaboot configuration file)" msgstr "" #. Tag: para #: install-methods.xml:847 #, no-c-format msgid "boot.msg (optional boot message)" msgstr "" #. Tag: para #: install-methods.xml:854 #, no-c-format msgid "" "The yaboot.conf configuration file should contain the " "following lines: \n" "default=install\n" "root=/dev/ram\n" "\n" "message=/boot.msg\n" "\n" "image=/vmlinux\n" " label=install\n" " initrd=/initrd.gz\n" " initrd-size=10000\n" " read-only\n" " Please note that the initrd-size parameter may need to be increased, depending on the image you " "are booting." msgstr "" #. Tag: title #: install-methods.xml:892 #, no-c-format msgid "Preparing Files for Hard Disk Booting" msgstr "Fájlok előkészítése merevlemez indításhoz" #. Tag: para #: install-methods.xml:893 #, no-c-format msgid "" "The installer may be booted using boot files placed on an existing hard " "drive partition, either launched from another operating system or by " "invoking a boot loader directly from the BIOS." msgstr "" "A telepítő egy létező merevlemez partíción lévő indító fájlokkal is " "indulhat, úgy más operációs rendszerből futtatva, mint egy boot betöltő BIOS " "általi közvetlen meghívásával." #. Tag: para #: install-methods.xml:899 #, no-c-format msgid "" "A full, pure network installation can be achieved using this " "technique. This avoids all hassles of removable media, like finding and " "burning CD images or struggling with too numerous and unreliable floppy " "disks." msgstr "" "Egy teljes, csak hálózat módú telepítés így lehetséges. Ez " "elkerüli a mozgó média bonyodalmait, mint CD találás és írás vagy több, " "megbízhatatlan flopi lemezzel küzdés." #. Tag: para #: install-methods.xml:906 #, no-c-format msgid "" "The installer cannot boot from files on an HFS+ file system. MacOS System " "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To " "determine whether your existing file system is HFS+, select Get " "Info for the volume in question. HFS file systems appear as " "Mac OS Standard, while HFS+ file systems say " "Mac OS Extended. You must have an HFS partition in " "order to exchange files between MacOS and Linux, in particular the " "installation files you download." msgstr "" #. Tag: para #: install-methods.xml:917 #, no-c-format msgid "" "Different programs are used for hard disk installation system booting, " "depending on whether the system is a NewWorld or an " "OldWorld model." msgstr "" #. Tag: title #: install-methods.xml:926 #, no-c-format msgid "" "Hard disk installer booting using LILO or GRUB" msgstr "" "Merevlemez telepítő indítás LILO vagy GRUB használatával" #. Tag: para #: install-methods.xml:928 #, no-c-format msgid "" "This section explains how to add to or even replace an existing linux " "installation using either LILO or GRUB." msgstr "" "E szakasz leírja, hogy adj még egyet egy létező linux telepítéshez, vagy " "akár cseréld azt a LILO vagy GRUB " "használatával." #. Tag: para #: install-methods.xml:934 #, no-c-format msgid "" "At boot time, both bootloaders support loading in memory not only the " "kernel, but also a disk image. This RAM disk can be used as the root file-" "system by the kernel." msgstr "" "Indításkor, e 2 betöltő nem csak a kernel, de egy lemez kép memóriába " "töltését is támogatja. Ez a RAM lemez a kernel által gyökér fájl-" "rendszerként használható." #. Tag: para #: install-methods.xml:940 #, fuzzy, no-c-format #| msgid "" #| "Copy the following files from the Debian archives to a convenient " #| "location on your hard drive, for instance to /boot/newinstall/." msgid "" "Copy the following files from the &debian; archives to a convenient location " "on your hard drive (note that LILO can not boot from files on an NTFS file " "system), for instance to /boot/newinstall/." msgstr "" "Másold az alábbi fájlokat a &debian; archívumokból egy alkalmas helyre a " "merevlemezre, például ide: /boot/newinstall/." #. Tag: para #: install-methods.xml:948 #, no-c-format msgid "vmlinuz (kernel binary)" msgstr "vmlinuz (kernel bináris)" #. Tag: para #: install-methods.xml:953 #, no-c-format msgid "initrd.gz (ramdisk image)" msgstr "initrd.gz (ramlemez kép)" #. Tag: para #: install-methods.xml:960 #, no-c-format msgid "" "Finally, to configure the bootloader proceed to ." msgstr "" "Végül állítsd be a boot betöltőt e folytatáshoz: ." #. Tag: title #: install-methods.xml:970 #, fuzzy, no-c-format #| msgid "" #| "Hard disk installer booting using LILO or " #| "GRUB" msgid "Hard disk installer booting using loadlin" msgstr "" "Merevlemez telepítő indítás LILO vagy GRUB használatával" #. Tag: para #: install-methods.xml:971 #, fuzzy, no-c-format #| msgid "" #| "This section explains how to add to or even replace an existing linux " #| "installation using either LILO or GRUB." msgid "" "This section explains how to prepare your hard drive for booting the " "installer from DOS using loadlin." msgstr "" "E szakasz leírja, hogy adj még egyet egy létező linux telepítéshez, vagy " "akár cseréld azt a LILO vagy GRUB " "használatával." #. Tag: para #: install-methods.xml:976 #, fuzzy, no-c-format #| msgid "" #| "Copy the following files from the Debian archives to a convenient " #| "location on your hard drive, for instance to /boot/newinstall/." msgid "" "Copy the following directories from a &debian; CD image to c:\\." msgstr "" "Másold az alábbi fájlokat a &debian; archívumokból egy alkalmas helyre a " "merevlemezre, például ide: /boot/newinstall/." #. Tag: para #: install-methods.xml:981 #, fuzzy, no-c-format #| msgid "initrd.gz (ramdisk image)" msgid "" "/&x86-install-dir; (kernel binary and ramdisk image)" msgstr "initrd.gz (ramlemez kép)" #. Tag: para #: install-methods.xml:986 #, fuzzy, no-c-format #| msgid "initrd.gz (ramdisk image)" msgid "/tools (loadlin tool)" msgstr "initrd.gz (ramlemez kép)" #. Tag: title #: install-methods.xml:999 #, no-c-format msgid "Hard Disk Installer Booting for OldWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1000 #, no-c-format msgid "" "The boot-floppy-hfs floppy uses miBoot to launch Linux installation, but miBoot cannot easily be used for hard disk booting. " "BootX, launched from MacOS, supports booting from " "files placed on the hard disk. BootX can also be " "used to dual-boot MacOS and Linux after your &debian; installation is " "complete. For the Performa 6360, it appears that quik " "cannot make the hard disk bootable. So BootX is " "required on that model." msgstr "" #. Tag: para #: install-methods.xml:1013 #, no-c-format msgid "" "Download and unstuff the BootX distribution, " "available from , or in the " "dists/woody/main/disks-powerpc/current/powermac " "directory on &debian; http/ftp mirrors and official &debian; CDs. Use " "Stuffit Expander to extract it from its archive. " "Within the package, there is an empty folder called Linux Kernels. Download linux.bin and ramdisk." "image.gz from the disks-powerpc/current/powermac folder, and place them in the Linux Kernels " "folder. Then place the Linux Kernels folder in the " "active System Folder." msgstr "" #. Tag: title #: install-methods.xml:1033 #, no-c-format msgid "Hard Disk Installer Booting for NewWorld Macs" msgstr "" #. Tag: para #: install-methods.xml:1034 #, no-c-format msgid "" "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as " "well as loading ELF binaries directly from the hard disk. These machines " "will boot Linux directly via yaboot, which supports " "loading a kernel and RAMdisk directly from an ext2 partition, as well as " "dual-booting with MacOS. Hard disk booting of the installer is particularly " "appropriate for newer machines without floppy drives. BootX is not supported and must not be used on NewWorld PowerMacs." msgstr "" #. Tag: para #: install-methods.xml:1045 #, no-c-format msgid "" "Copy (not move) the following four files which you " "downloaded earlier from the &debian; archives, onto the root level of your " "hard drive (this can be accomplished by option-dragging " "each file to the hard drive icon)." msgstr "" #. Tag: filename #: install-methods.xml:1055 install-methods.xml:1381 #, no-c-format msgid "vmlinux" msgstr "" #. Tag: filename #: install-methods.xml:1060 install-methods.xml:1386 #, no-c-format msgid "initrd.gz" msgstr "" #. Tag: filename #: install-methods.xml:1065 install-methods.xml:1391 #, no-c-format msgid "yaboot" msgstr "" #. Tag: filename #: install-methods.xml:1070 install-methods.xml:1396 #, no-c-format msgid "yaboot.conf" msgstr "" #. Tag: para #: install-methods.xml:1075 #, no-c-format msgid "" "Make a note of the partition number of the MacOS partition where you place " "these files. If you have the MacOS pdisk program, you can " "use the L command to check for the partition number. You " "will need this partition number for the command you type at the Open " "Firmware prompt when you boot the installer." msgstr "" #. Tag: para #: install-methods.xml:1083 #, no-c-format msgid "To boot the installer, proceed to ." msgstr "" #. Tag: title #: install-methods.xml:1096 #, no-c-format msgid "Preparing Files for TFTP Net Booting" msgstr "Fájlok előkészítése TFTP hálózati indításhoz" #. Tag: para #: install-methods.xml:1097 #, no-c-format msgid "" "If your machine is connected to a local area network, you may be able to " "boot it over the network from another machine, using TFTP. If you intend to " "boot the installation system from another machine, the boot files will need " "to be placed in specific locations on that machine, and the machine " "configured to support booting of your specific machine." msgstr "" "Ha géped egy helyi hálózatra kötött, alkalom nyílhat indítására a hálózaton " "át másik gépről TFTP használatával. Ha a telepítő rendszert másik gépről " "indítanád, az indító fájlokat adott helyre kell tenni azon és be kell " "állítani rajta, hogy támogassa az adott géped indítását." #. Tag: para #: install-methods.xml:1105 #, no-c-format msgid "" "You need to set up a TFTP server, and for many machines a DHCP server, or RARP server, or BOOTP server." msgstr "" "Be kell állítanod egy TFTP kiszolgálót, és sok géphez egy DHCP kiszolgálót " ", vagy RARP kiszolgálót, vagy BOOTP kiszolgálót." #. Tag: para #: install-methods.xml:1112 #, no-c-format msgid "" "The Reverse Address Resolution Protocol " "(RARP) is one way to tell your client what IP address to use for itself. " "Another way is to use the BOOTP protocol. BOOTP is an IP protocol that informs a computer of its IP " "address and where on the network to obtain a boot image. The DHCP " "(Dynamic Host Configuration Protocol) is a more flexible, backwards-" "compatible extension of BOOTP. Some systems can only be configured via DHCP." msgstr "" "A fordított címfeloldó protokoll (RARP) " "egy mód az ügyfél számára közölni, milyen IP-címet használjon. Egy másik mód " "a BOOTP protokoll. A BOOTP egy " "IP protokoll mely megmondja egy gép IP-címét és, hogy hol éri el a hálózaton " "az indító képet. A DHCP (Dinamikus gazda konfiguráló Protokoll) a " "BOOTP egy sokkal rugalmasabb, visszafelé-kompatibilis kiterjesztése. Egyes " "rendszerek csak DHCP módon állíthatók be." #. Tag: para #: install-methods.xml:1126 #, no-c-format msgid "" "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good " "idea to use DHCP instead of BOOTP. Some of the latest machines are unable to " "boot using BOOTP." msgstr "" #. Tag: para #: install-methods.xml:1132 #, no-c-format msgid "" "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There " "is an rbootd package available in &debian;." msgstr "" "Pár régibb HPPA gép (például a 715/75) RBOOTD-t használ BOOTP helyett. A " "&debian; tartalmaz rbootd csomagot." #. Tag: para #: install-methods.xml:1137 #, no-c-format msgid "" "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to " "the client. Theoretically, any server, on any platform, which implements " "these protocols, may be used. In the examples in this section, we shall " "provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux." msgstr "" "A Triviális fájl átviteli protokoll (TFTP) arra jó, hogy átadja az indító " "képet az ügyfélnek. Elméletileg bármely kiszolgáló bármely platformon, mely " "megvalósítja e protokollokat használható. A példákban SunOS 4.x, SunOS 5.x " "(más nevén Solaris), és GNU/Linux parancsokat adunk." #. Tag: para #: install-methods.xml:1145 #, no-c-format msgid "" "For a &debian-gnu; server we recommend tftpd-hpa. " "It's written by the same author as the syslinux " "bootloader and is therefore least likely to cause issues. A good alternative " "is atftpd." msgstr "" #. Tag: title #: install-methods.xml:1161 #, no-c-format msgid "Setting up RARP server" msgstr "RARP szerver beállítása" #. Tag: para #: install-methods.xml:1162 #, fuzzy, no-c-format #| msgid "" #| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " #| "address) of the client computers to be installed. If you don't know this " #| "information, you can pick it off the initial " #| "OpenPROM boot messages, use the OpenBoot .enet-addr command, or boot into Rescue mode (e." #| "g., from the rescue floppy) and use the command /sbin/ifconfig " #| "eth0." msgid "" "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " "address) of the client computers to be installed. If you don't know this " "information, you can pick it off the initial " "OpenPROM boot messages, use the OpenBoot .enet-addr " "command, or boot into Rescue mode (e.g., from the " "rescue floppy) and use the command ip addr show dev eth0." msgstr "" "A RARP beállításához tudnod kell a telepíteni kívánt kliens Ethernet címét " "(közismertebben MAC cím). Ha nem áll rendelkezésedre ezen információ, akkor " " kiszedheted az OpenPROM indító kezdeti üzeneteiből " "az OpenBoot .enet-addr parancsával vagy a " "gépet Mentő módban indítva (például a mentő flopi lemezzel) " "használhatod a /sbin/ifconfig eth0 parancsot." #. Tag: para #: install-methods.xml:1174 #, no-c-format msgid "" "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, " "you use the rarpd program. You need to ensure that the " "Ethernet hardware address for the client is listed in the ethers database (either in the /etc/ethers file, or via " "NIS/NIS+) and in the hosts database. Then you need to start " "the RARP daemon. Issue the command (as root): /usr/sbin/rarpd -a on most Linux systems and SunOS 5 (Solaris 2), /usr/" "sbin/in.rarpd -a on some other Linux systems, or /usr/" "etc/rarpd -a in SunOS 4 (Solaris 1)." msgstr "" "A Linux 2.4 vagy 2.6 kernelt vagy Solaris/SunOS-t használó RARP szervereken " "az rarpd programot használod. Győződj meg róla, hogy a " "kliens szerepel az ethers adatbázisban (a /etc/" "ethers fájlban vagy a NIS/NIS+ által) és a hosts " "adatbázisban. Ezután indítsd el a RARP démont. Add ki az alábbi parancsok " "egyikét (mint root): /usr/sbin/rarpd -a a legtöbb " "Linux és a SunOS 5 rendszeren (Solaris 2), /usr/sbin/in.rarpd -a néhány másik Linux rendszeren, vagy /usr/etc/rarpd -a a SunOS 4 rendszeren (Solaris 1)." #. Tag: title #: install-methods.xml:1195 #, no-c-format msgid "Setting up a DHCP server" msgstr "Egy DHCP kiszolgáló beállítása" #. Tag: para #: install-methods.xml:1196 #, no-c-format msgid "" "One free software DHCP server is ISC dhcpd. For &debian-" "gnu;, the dhcp3-server package is recommended. Here " "is a sample configuration file for it (see /etc/dhcp3/dhcpd.conf):" msgstr "" "Egy szabad DHCP kiszolgáló az ISC dhcpd. A &debian-gnu; " "rendszerben a dhcp3-server csomagban van. Itt egy " "példa beállító fájl (lásd: /etc/dhcp3/dhcpd.conf):" #. Tag: screen #: install-methods.xml:1203 #, no-c-format msgid "" "option domain-name \"example.com\";\n" "option domain-name-servers ns1.example.com;\n" "option subnet-mask 255.255.255.0;\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "server-name \"servername\";\n" "\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option routers 192.168.1.1;\n" "}\n" "\n" "host clientname {\n" " filename \"/tftpboot.img\";\n" " server-name \"servername\";\n" " next-server servername;\n" " hardware ethernet 01:23:45:67:89:AB;\n" " fixed-address 192.168.1.90;\n" "}" msgstr "" "option domain-name \"example.com\";\n" "option domain-name-servers ns1.example.com;\n" "option subnet-mask 255.255.255.0;\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "server-name \"servername\";\n" "\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option routers 192.168.1.1;\n" "}\n" "\n" "host clientname {\n" " filename \"/tftpboot.img\";\n" " server-name \"servername\";\n" " next-server servername;\n" " hardware ethernet 01:23:45:67:89:AB;\n" " fixed-address 192.168.1.90;\n" "}" #. Tag: para #: install-methods.xml:1205 #, no-c-format msgid "" "In this example, there is one server servername " "which performs all of the work of DHCP server, TFTP server, and network " "gateway. You will almost certainly need to change the domain-name options, " "as well as the server name and client hardware address. The " "filename option should be the name of the file " "which will be retrieved via TFTP." msgstr "" "E példában a servername nevű kiszolgáló végzi a " "DHCP és TFTP kiszolgáló és hálózati átjáró munkáját. Természetesen be kell " "állítani a tartomány-név opciókat, a kiszolgáló nevét és az ügyfél hardver " "címét. A filename opció a TFTP-n át elérendő fájl " "neve." #. Tag: para #: install-methods.xml:1215 #, no-c-format msgid "" "After you have edited the dhcpd configuration file, " "restart it with /etc/init.d/dhcp3-server restart." msgstr "" "A dhcpd beállító fájl szerkesztése után, indítsd újra " "így: /etc/init.d/dhcp3-server restart." #. Tag: title #: install-methods.xml:1223 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "PXE indítás bekapcsolása a DHCP beállításban" #. Tag: para #: install-methods.xml:1224 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-" "boot Execution Environment (PXE) method of TFTP. \n" "option domain-name \"example.com\";\n" "\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "\n" "allow booting;\n" "allow bootp;\n" "\n" "# The next paragraph needs to be modified to fit your case\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option broadcast-address 192.168.1.255;\n" "# the gateway address which can be different\n" "# (access to the internet for instance)\n" " option routers 192.168.1.1;\n" "# indicate the dns you want to use\n" " option domain-name-servers 192.168.1.3;\n" "}\n" "\n" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"pxelinux.0\";\n" " }\n" "}\n" " Note that for PXE booting, the client filename " "pxelinux.0 is a boot loader, not a kernel image (see " " below)." msgstr "" "Itt egy másik, indítás-előtti futtatási környezet (PXE) TFTP módot használó " "dhcp.conf példa. \n" "option domain-name \"example.com\";\n" "\n" "default-lease-time 600;\n" "max-lease-time 7200;\n" "\n" "allow booting;\n" "allow bootp;\n" "\n" "# The next paragraph needs to be modified to fit your case\n" "subnet 192.168.1.0 netmask 255.255.255.0 {\n" " range 192.168.1.200 192.168.1.253;\n" " option broadcast-address 192.168.1.255;\n" "# the gateway address which can be different\n" "# (access to the internet for instance)\n" " option routers 192.168.1.1;\n" "# indicate the dns you want to use\n" " option domain-name-servers 192.168.1.3;\n" "}\n" "\n" "group {\n" " next-server 192.168.1.3;\n" " host tftpclient {\n" "# tftp client hardware address\n" " hardware ethernet 00:10:DC:27:6C:15;\n" " filename \"pxelinux.0\";\n" " }\n" "}\n" " A PXE indítás számára a pxelinux.0 ügyfél fájl neve egy boot betöltő, nem egy kernel kép (lásd az " "alábbi részt)." #. Tag: title #: install-methods.xml:1244 #, no-c-format msgid "Setting up a BOOTP server" msgstr "BOOTP kiszolgáló beállítása" #. Tag: para #: install-methods.xml:1245 #, no-c-format msgid "" "There are two BOOTP servers available for GNU/Linux. The first is CMU " "bootpd. The other is actually a DHCP server: ISC " "dhcpd. In &debian-gnu; these are contained in the " "bootp and dhcp3-server " "packages respectively." msgstr "" "2 BOOTP kiszolgáló van GNU/Linux alatt. Az 1. a CMU bootpd. A másik egy DHCP kiszolgáló: az ISC dhcpd. A " "&debian-gnu; rendszerben ezek a bootp és " "dhcp3-server csomagokban vannak." #. Tag: para #: install-methods.xml:1253 #, fuzzy, no-c-format #| msgid "" #| "To use CMU bootpd, you must first uncomment (or add) " #| "the relevant line in /etc/inetd.conf. On &debian-" #| "gnu;, you can run update-inetd --enable bootps, " #| "then /etc/init.d/inetd reload to do so. Just in " #| "case your BOOTP server does not run Debian, the line in question should " #| "look like: \n" #| "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" #| " Now, you must create an /etc/" #| "bootptab file. This has the same sort of familiar and cryptic " #| "format as the good old BSD printcap, " #| "termcap, and disktab files. See " #| "the bootptab manual page for more information. For " #| "CMU bootpd, you will need to know the hardware (MAC) " #| "address of the client. Here is an example /etc/bootptab: \n" #| "client:\\\n" #| " hd=/tftpboot:\\\n" #| " bf=tftpboot.img:\\\n" #| " ip=192.168.1.90:\\\n" #| " sm=255.255.255.0:\\\n" #| " sa=192.168.1.1:\\\n" #| " ha=0123456789AB:\n" #| " You will need to change at least the " #| "ha option, which specifies the hardware address of the " #| "client. The bf option specifies the file a client should " #| "retrieve via TFTP; see for more details. " #| " On SGI machines you can just enter the command " #| "monitor and type printenv. The value of the " #| "eaddr variable is the machine's MAC address. " msgid "" "To use CMU bootpd, you must first uncomment (or add) the " "relevant line in /etc/inetd.conf. On &debian-gnu;, you " "can run update-inetd --enable bootps, then " "/etc/init.d/inetd reload to do so. Just in case your " "BOOTP server does not run &debian;, the line in question should look like: " "\n" "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" " Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " "good old BSD printcap, termcap, " "and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " "Here is an example /etc/bootptab: " "\n" "client:\\\n" " hd=/tftpboot:\\\n" " bf=tftpboot.img:\\\n" " ip=192.168.1.90:\\\n" " sm=255.255.255.0:\\\n" " sa=192.168.1.1:\\\n" " ha=0123456789AB:\n" " You will need to change at least the ha option, which specifies the hardware address of the client. The " "bf option specifies the file a client should retrieve via " "TFTP; see for more details. On SGI machines you can just enter the command monitor and type " "printenv. The value of the eaddr variable is the machine's MAC address. " msgstr "" "A CMU bootpd használatához a /etc/inetd.conf megfelelő sora kell. A &debian-gnu; rendszeren így érdemes: " "update-inetd --enable bootps, majd /etc/" "init.d/inetd reload. Csak arra az esetre mutatjuk, ha a BOOTP " "kiszolgáló nem &debian; rendszert futtatna, a kérdéses sor így áll össze: " "\n" "bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" " Most létre kell hozni a /etc/bootptab fájlt. A régi jó BSD printcap, " "termcap, és disktab fájlokban " "megszokott formájú. Lásd a bootptab kézikönyv oldalt " "több adatért. A CMU bootpd parancshoz tudni kell az " "ügyfél hardver (MAC) címét. Itt egy példa /etc/bootptab: \n" "client:\\\n" " hd=/tftpboot:\\\n" " bf=tftpboot.img:\\\n" " ip=192.168.1.90:\\\n" " sm=255.255.255.0:\\\n" " sa=192.168.1.1:\\\n" " ha=0123456789AB:\n" " Legalább a ha opciót cserélni " "kell, mely megadja az ügyfél hardver címét. A bf lehetőség " "megadja az ügyfél által a TFTP-n elérendő fájlt; lásd ezt: több részletért. SGI gépeken lépj " "be a parancs monitorba és írd be ezt: printenv. Az " "eaddr változó értéke a gép MAC címe. " #. Tag: para #: install-methods.xml:1286 #, fuzzy, no-c-format #| msgid "" #| "By contrast, setting up BOOTP with ISC dhcpd is really " #| "easy, because it treats BOOTP clients as a moderately special case of " #| "DHCP clients. Some architectures require a complex configuration for " #| "booting clients via BOOTP. If yours is one of those, read the section " #| ". In that case, you will probably be able to get " #| "away with simply adding the allow bootp directive " #| "to the configuration block for the subnet containing the client, and " #| "restart dhcpd with /etc/init.d/dhcpd3-" #| "server restart." msgid "" "By contrast, setting up BOOTP with ISC dhcpd is really " "easy, because it treats BOOTP clients as a moderately special case of DHCP " "clients. Some architectures require a complex configuration for booting " "clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " "adding the allow bootp directive to the configuration " "block for the subnet containing the client in /etc/dhcp3/dhcpd." "conf, and restart dhcpd with /etc/" "init.d/dhcp3-server restart." msgstr "" "Az ISC dhcpd BOOTP beállítása még egyszerűbb, mert a " "BOOTP ügyfeleket mérsékelten különleges esetű DHCP ügyfeleknek tekinti. " "Néhány architektúra összetett beállítást igényel az ügyfelek BOOTP " "indításához. Ebben az esetben olvasd el a részt. " "Amúgy minden bizonnyal könnyen eljutsz az allow bootp " "beállításig az adott ügyfél gépet tartalmazó alhálózatot beállító " "szakaszban, majd indítsd újra a dhcpd-t így: /" "etc/init.d/dhcp3-server restart." #. Tag: title #: install-methods.xml:1305 #, no-c-format msgid "Enabling the TFTP Server" msgstr "TFTP kiszolgáló bekapcsolása" #. Tag: para #: install-methods.xml:1306 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that " "tftpd is enabled." msgstr "" #. Tag: para #: install-methods.xml:1311 #, no-c-format msgid "" "In the case of tftpd-hpa there are two ways the " "service can be run. It can be started on demand by the system's " "inetd daemon, or it can be set up to run as an " "independent daemon. Which of these methods is used is selected when the " "package is installed and can be changed by reconfiguring the package." msgstr "" #. Tag: para #: install-methods.xml:1320 #, no-c-format msgid "" "Historically, TFTP servers used /tftpboot as directory " "to serve images from. However, &debian-gnu; packages may use other " "directories to comply with the Filesystem " "Hierarchy Standard. For example, tftpd-hpa by " "default uses /srv/tftp. You may have to adjust the " "configuration examples in this section accordingly." msgstr "" "Régen a TFTP kiszolgálók a /tftpboot könyvtárat " "használták képek adására. De a &debian-gnu; csomagok képesek a Fájlrendszer Hierarchia Szabványnak megfelelő " "könyvtárak használatára. Például a tftpd-hpa alapban " "a /srv/tftp könyvtárat használja. Állítsd be az e " "szakaszban adott beállító példákat így." #. Tag: para #: install-methods.xml:1330 #, no-c-format msgid "" "All in.tftpd alternatives available in &debian; should " "log TFTP requests to the system logs by default. Some of them support a " "-v argument to increase verbosity. It is recommended " "to check these log messages in case of boot problems as they are a good " "starting point for diagnosing the cause of errors." msgstr "" #. Tag: para #: install-methods.xml:1338 #, no-c-format msgid "" "If you intend to install &debian; on an SGI machine and your TFTP server is " "a GNU/Linux box running Linux 2.4, you'll need to set the following on your " "server: \n" "# echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc\n" " to turn off Path MTU discovery, otherwise the " "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets " "are sent from a source port no greater than 32767, or the download will " "stall after the first packet. Again, it's Linux 2.4.X tripping this bug in " "the PROM, and you can avoid it by setting \n" "# echo \"2048 32767\" > /proc/sys/net/ipv4/ip_local_port_range\n" " to adjust the range of source ports the Linux " "TFTP server uses." msgstr "" #. Tag: title #: install-methods.xml:1360 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "TFTP képek helyükre tétele" #. Tag: para #: install-methods.xml:1361 #, no-c-format msgid "" "Next, place the TFTP boot image you need, as found in , in the tftpd boot image directory. You may " "have to make a link from that file to the file which tftpd will use for booting a particular client. Unfortunately, the file " "name is determined by the TFTP client, and there are no strong standards." msgstr "" "Most tedd a TFTP indító képet a szerint a " "tftpd indító kép könyvtárba. Innen egy láncot kell " "csinálni arra a fájlra, melyet a tftpd egy adott ügyfél " "indítására használ majd. Sajnos, a fájl nevét a TFTP ügyfél határozza meg és " "erre nincs erős szabvány." #. Tag: para #: install-methods.xml:1370 #, no-c-format msgid "" "On NewWorld Power Macintosh machines, you will need to set up the " "yaboot boot loader as the TFTP boot image. " "Yaboot will then retrieve the kernel and RAMdisk images " "via TFTP itself. You will need to download the following files from the " "netboot/ directory:" msgstr "" #. Tag: filename #: install-methods.xml:1401 #, no-c-format msgid "boot.msg" msgstr "" #. Tag: para #: install-methods.xml:1406 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass pxelinux.0 to " "tftpd as the filename to boot." msgstr "" "A PXE indításhoz az egyetlen tennivaló a netboot/netboot.tar.gz beállítása. Egyszerűen bontsd ki a tftpd indító " "kép könyvtárba. Ellenőrizd, hogy a dhcp kiszolgáló a pxelinux.0-t adja át a tftpd számára, mint az indító fájl " "neve." #. Tag: para #: install-methods.xml:1414 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " "netboot/netboot.tar.gz tarball. Simply extract this " "tarball into the tftpd boot image directory. Make sure " "your dhcp server is configured to pass /debian-installer/ia64/" "elilo.efi to tftpd as the filename to boot." msgstr "" "A PXE indításhoz az egyetlen tennivaló a netboot/netboot.tar.gz beállítása. Egyszerűen bontsd ki a tftpd indító " "kép könyvtárba. Ellenőrizd, hogy a dhcp kiszolgáló a /debian-" "installer/ia64/elilo.efi-t adja át a tftpd " "számára, mint az indító fájl neve." #. Tag: title #: install-methods.xml:1426 #, no-c-format msgid "SPARC TFTP Booting" msgstr "" #. Tag: para #: install-methods.xml:1427 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as " "SUN4M or SUN4C, to the filename. Thus, if your " "system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename " "would be C0A80103.SUN4C. However, there are also " "subarchitectures where the file the client looks for is just " "client-ip-in-hex. An easy way to determine the " "hexadecimal code for the IP address is to enter the following command in a " "shell (assuming the machine's intended IP is 10.0.0.4). " "\n" "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n" " To get to the correct filename, you will need to " "change all letters to uppercase and if necessary append the subarchitecture " "name." msgstr "" #. Tag: para #: install-methods.xml:1443 #, no-c-format msgid "" "If you've done all this correctly, giving the command boot net from the OpenPROM should load the image. If the image cannot be " "found, try checking the logs on your tftp server to see which image name is " "being requested." msgstr "" #. Tag: para #: install-methods.xml:1450 #, no-c-format msgid "" "You can also force some sparc systems to look for a specific file name by " "adding it to the end of the OpenPROM boot command, such as boot " "net my-sparc.image. This must still reside in the directory that " "the TFTP server looks in." msgstr "" #. Tag: title #: install-methods.xml:1461 #, no-c-format msgid "SGI TFTP Booting" msgstr "SGI TFTP indítás" #. Tag: para #: install-methods.xml:1462 #, no-c-format msgid "" "On SGI machines you can rely on the bootpd to supply the " "name of the TFTP file. It is given either as the bf= " "in /etc/bootptab or as the filename= option in /etc/dhcpd.conf." msgstr "" "SGI gépeken a bootpd nyújtja majd a TFTP fájl nevét. Ez " "megadható a bf= opcióval a /etc/bootptab vagy a filename= opcióval a /etc/" "dhcpd.conf fájlban." #. Tag: title #: install-methods.xml:1570 #, no-c-format msgid "Automatic Installation" msgstr "Automata telepítés" #. Tag: para #: install-methods.xml:1571 #, fuzzy, no-c-format #| msgid "" #| "For installing on multiple computers it's possible to do fully automatic " #| "installations. Debian packages intended for this include fai (which uses an install server), replicator, systemimager, autoinstall, and the Debian Installer itself." msgid "" "For installing on multiple computers it's possible to do fully automatic " "installations. &debian; packages intended for this include fai-" "quickstart (which can use an install server) and the &debian; " "Installer itself. Have a look at the FAI home page for detailed information." msgstr "" "Több gépre telepítésre teljesen automata telepítés is végezhető. Az erre " "szolgáló &debian; csomagok a fai (mely egy telepítő " "kiszolgálót használ), replicator, " "systemimager, autoinstall, és " "a &debian; Telepítő maga." #. Tag: title #: install-methods.xml:1583 #, fuzzy, no-c-format #| msgid "Automatic Installation Using the Debian Installer" msgid "Automatic Installation Using the &debian; Installer" msgstr "Automata telepítés a &debian; Telepítő használatával" #. Tag: para #: install-methods.xml:1584 #, no-c-format msgid "" "The &debian; Installer supports automating installs via preconfiguration " "files. A preconfiguration file can be loaded from the network or from " "removable media, and used to fill in answers to questions asked during the " "installation process." msgstr "" "A &debian; Telepítő támogatja az automata telepítéseket elő-beállító " "fájlokon át. Egy elő-beállító fájl a hálózatról vagy cserélhető médiáról " "tölthető le és a telepítő folyamat kérdéseinek megválaszolására használható." #. Tag: para #: install-methods.xml:1591 #, no-c-format msgid "" "Full documentation on preseeding including a working example that you can " "edit is in ." msgstr "" "Erről dokumentáció és működő példa a " "részben található." #~ msgid "NSLU2 Installation Files" #~ msgstr "NSLU2 telepítő fájlok" #, fuzzy #~| msgid "" #~| "A firmware image is provided for the Linksys NSLU2 which will " #~| "automatically boot debian-installer. This " #~| "firmware image can be obtained from &nslu2-firmware-img;." #~ msgid "" #~ "A firmware image is provided for the Linksys NSLU2 which will " #~ "automatically boot debian-installer. This image " #~ "can be uploaded via the Linksys web frontend or with upslug2. This " #~ "firmware image can be obtained from &nslu2-firmware-img;." #~ msgstr "" #~ "Egy firmware képfájl áll rendelkezésre, mely automatikusan elindítja a " #~ "debian-installer-t. A képfájl innen szerezhető be: " #~ "&nslu2-firmware-img;." #~ msgid "Copying the files — the easy way" #~ msgstr "Fájlok másolása — a könnyű mód" #~ msgid "" #~ "If your system refuses to boot from the memory stick, the stick may " #~ "contain an invalid master boot record (MBR). To fix this, use the " #~ "install-mbr command from the package mbr:" #~ msgstr "" #~ "Ha a rendszer elutasítja az indítást az eszközről, az alighanem " #~ "érvénytelen MBR-t tartalmaz. Javításához használd az install-" #~ "mbr parancsot az mbr csomagból:" #, fuzzy #~| msgid "# install-mbr /dev/sda" #~ msgid "# install-mbr /dev/sdX" #~ msgstr "# install-mbr /dev/sda" #~ msgid "The installer cannot boot from files on an NTFS file system." #~ msgstr "A telepítő nem indít NTFS fájlrendszeren lévő fájlokról." #~ msgid "" #~ "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, " #~ "you will need a TFTP server with tsize support. On " #~ "a &debian-gnu; server, the atftpd and " #~ "tftpd-hpa packages qualify; we recommend " #~ "tftpd-hpa." #~ msgstr "" #~ "A TFTP indítás indítás-előtti futtatási környezet (PXE) módja " #~ "használatához tsize támogató TFTP kiszolgáló kell. " #~ "Egy &debian-gnu; kiszolgálón az atftpd és " #~ "tftpd-hpa csomagok ilyenek; a tftpd-" #~ "hpa-t ajánljuk." #~ msgid "" #~ "To get the TFTP server ready to go, you should first make sure that " #~ "tftpd is enabled. This is usually enabled by having " #~ "something like the following line in /etc/inetd.conf: \n" #~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" #~ " Debian packages will in general set this up " #~ "correctly by default when they are installed." #~ msgstr "" #~ "A TFTP kiszolgáló indításához először győződj meg a tftpd bekapcsolt voltáról. Ehhez a /etc/inetd.conf fájlban általában ilyen sor szerepel: " #~ "\n" #~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" #~ " A Debian csomagok általában ezt helyesen " #~ "beállítják telepítésükkor." #, fuzzy #~| msgid "" #~| "Look in /etc/inetd.conf and remember the directory " #~| "which is used as the argument of in.tftpd " #~| " The -l argument enables some versions of " #~| "in.tftpd to log all requests to the system logs; this " #~| "is useful for diagnosing boot errors. ; you'll need " #~| "that below. If you've had to change /etc/inetd.conf, you'll have to notify the running inetd " #~| "process that the file has changed. On a Debian machine, run /" #~| "etc/init.d/inetd reload; on other machines, find out the " #~| "process ID for inetd, and run kill -HUP " #~| "inetd-pid." #~ msgid "" #~ "Look in /etc/inetd.conf and remember the directory " #~ "which is used as the argument of in.tftpd " #~ " All in.tftpd alternatives available in Debian " #~ "should log TFTP requests to the system logs by default. Some of them " #~ "support a -v argument to increase verbosity. It is " #~ "recommended to check these log messages in case of boot problems as they " #~ "are a good starting point for diagnosing the cause of errors. ; you'll need that below. If you've had to change /etc/" #~ "inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run " #~ "/etc/init.d/inetd reload; on other machines, find " #~ "out the process ID for inetd, and run kill -" #~ "HUP inetd-pid." #~ msgstr "" #~ "Nézz a /etc/inetd.conf fájlba és jegyezd meg az " #~ "in.tftpd argumentumában adott könyvtárat " #~ " A -l az in.tftpd egyes " #~ "verzióiban az összes kérés rendszer-naplóba naplózását kapcsolja be; ez " #~ "hasznos indítási hibák vizsgálatára. ; ez kell alább. " #~ "A /etc/inetd.conf módosításakor értesíteni kell a " #~ "futó inetd folyamatot, hogy a fájl változott. Egy " #~ "Debian gépen ez ilyen egyszerű: /etc/init.d/inetd reload; más gépeken keresd meg az inetd PID-et, és " #~ "futtasd ezt: kill -HUP inetd-pid." #~ msgid "" #~ "Booting the installer from floppy disk is not supported on Amigas or 68k " #~ "Macs." #~ msgstr "" #~ "A telepítő indítása flopi lemezről nem támogatott Amiga gépeken vagy 68k " #~ "Maceken." #~ msgid "Writing Disk Images on Atari Systems" #~ msgstr "Lemez képek írása Atari rendszereken" #~ msgid "" #~ "You'll find the &rawwrite.ttp; program in the same directory as the " #~ "floppy disk images. Start the program by double clicking on the program " #~ "icon, and type in the name of the floppy image file you want written to " #~ "the floppy at the TOS program command line dialog box." #~ msgstr "" #~ "A &rawwrite.ttp; a flopi képek könyvtárában van. Indítsd a programot " #~ "ikonjára duplán kattintva, majd írd be a kiírandó flopi kép fájl a TOS " #~ "párbeszéd dobozban." #~ msgid "BVM/Motorola TFTP Booting" #~ msgstr "BVM/Motorola TFTP Indítás" #~ msgid "" #~ "For BVM and Motorola VMEbus systems copy the files &bvme6000-tftp-files; " #~ "to /tftpboot/." #~ msgstr "" #~ "BVM és Motorola VMEbus rendszerekhez másold a &bvme6000-tftp-files; " #~ "fájlokat ide: /tftpboot/." #~ msgid "" #~ "Next, configure your boot ROMs or BOOTP server to initially load the " #~ "tftplilo.bvme or tftplilo.mvme " #~ "files from the TFTP server. Refer to the tftplilo.txt file for your subarchitecture for additional system-specific " #~ "configuration information." #~ msgstr "" #~ "Ezután állítsd be az indító ROM eszközöket vagy BOOTP kiszolgálót a " #~ "tftplilo.bvme vagy tftplilo.mvme fájlok betöltésére a TFTP kiszolgálóról. Lásd a " #~ "tftplilo.txt fájl al-architektúrádhoz tovább " #~ "rendszer-függő beállító adatokért." #~ msgid "Broadcom BCM91250A and BCM91480B TFTP Booting" #~ msgstr "Broadcom BCM91250A és BCM91480B TFTP indítás" #~ msgid "" #~ "You don't have to configure DHCP in a special way because you'll pass the " #~ "full path of the file to be loaded to CFE." #~ msgstr "" #~ "Nem kell a DHCP-t különleges módon beállítani, mert a CFE számára átadjuk " #~ "a betöltendő fájl teljes útvonalát." #~ msgid "" #~ "The easiest way to boot a Netwinder is over the network, using the " #~ "supplied TFTP image &netwinder-boot-img;." #~ msgstr "" #~ "Egy Netwinder indításának legkönnyebb módja hálózaton a &netwinder-boot-" #~ "img; által adott TFTP kép használata." #~ msgid "CATS Installation Files" #~ msgstr "CATS telepítő fájlok" #~ msgid "" #~ "CATS can be booted either via the network or from CD-ROM. The kernel and " #~ "initrd can be obtained from &cats-boot-img;." #~ msgstr "" #~ "CATS indítható hálózatról vagy CD-ROM lemezről. A &cats-boot-img; adja a " #~ "kernel-t és az initrd-t." #~ msgid "USB stick partitioning on &arch-title;" #~ msgstr "USB tár particionálása &arch-title; gépen" #~ msgid "" #~ "The syslinux.cfg configuration file should contain " #~ "the following two lines:" #~ msgstr "" #~ "A syslinux.cfg beállító fájl az alábbi 2 sort " #~ "tartalmazza:" #~ msgid "" #~ "default vmlinuz\n" #~ "append initrd=initrd.gz" #~ msgstr "" #~ "default vmlinuz\n" #~ "append initrd=initrd.gz" #~ msgid "" #~ "The installer will look for a Debian ISO image on the stick as its source " #~ "for additional data needed for the installation. So your next step is to " #~ "copy a Debian ISO image (businesscard, netinst or even a full CD image) " #~ "onto your stick (be sure to select one that fits). The file name of the " #~ "image must end in .iso." #~ msgstr "" #~ "A telepítő Debian ISO képet keres a telepítéshez szükséges további " #~ "adatokhoz. Így a következő lépés egy Debian ISO kép (businesscard, " #~ "netinst vagy akár egy teljes CD kép) másolása az USB tárra (mely ráfér). " #~ "A fájl nevének vége maradjon .iso." #~ msgid "" #~ "If you want to install over the network, without using an ISO image, you " #~ "will of course skip the previous step. Moreover you will have to use the " #~ "initial ramdisk from the netboot directory instead " #~ "of the one from hd-media, because hd-media/" #~ "initrd.gz does not have network support." #~ msgstr "" #~ "Ha hálózatról telepítenél ISO kép használata nélkül, természetesen " #~ "kihagyhatod az előző lépést. Ekkor az indító ramdisk forrása a " #~ "netboot könyvtár legyen a hd-media helyett, mert hd-media/initrd.gz nem " #~ "támogat hálózatot." #~ msgid "" #~ "When you are done, unmount the USB memory stick (umount /mnt) and activate its write protection switch." #~ msgstr "" #~ "Mikor kész vagy, csatold le az USB tárolót (umount /mnt) és esetleg tedd írásvédetté." #~ msgid "" #~ "The RiscPC installer is booted initially from RISC OS. All the necessary " #~ "files are provided in one Zip archive, &rpc-install-kit;. Download this " #~ "file onto the RISC OS machine, copy the linloader.!Boot components into place, and run !dInstall." #~ msgstr "" #~ "A RiscPC telepítő a RISC OS alól indul. Az összes szükséges fájlt " #~ "egyetlen Zip archívum tartalmazza: &rpc-install-kit;. Töltsd le e fájlt a " #~ "RISC OS gépre, csomagold ki a linloader.!Boot " #~ "összetevőket a helyükre és futtasd a !dInstall fájlt."