# Hungarian translation of Debian Installation Guide boot-installer
# SZERVÁC Attila <sas@321.hu>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2007-02-02 17:44+0000\n"
"PO-Revision-Date: 2007-02-03 10:55+0100\n"
"Last-Translator: SZERVÁC Attila <sas@321.hu>\n"
"Language-Team: Hungarian <debian-l10n-hungarian@lists.debian>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Poedit-Country: HUNGARY\n"
"X-Poedit-Language: Hungarian\n"

#. Tag: title
#: boot-installer.xml:4
#, no-c-format
msgid "Booting the Installation System"
msgstr "A telepítő rendszer indítása"

#. Tag: title
#: boot-installer.xml:9
#, no-c-format
msgid "Booting the Installer on &arch-title;"
msgstr "A telepítő indítása &arch-title; architektúrán"

#. Tag: para
#: boot-installer.xml:15
#, no-c-format
msgid "For information on how to boot the graphical installer, see <xref linkend=\"graphical\"/>."
msgstr "A grafikus telepítő indításáról lásd az alábbit: <xref linkend=\"graphical\"/>."

#. Tag: title
#: boot-installer.xml:27
#, no-c-format
msgid "Alpha Console Firmware"
msgstr ""

#. Tag: para
#: boot-installer.xml:28
#, no-c-format
msgid "Console firmware is stored in a flash ROM and started when an Alpha system is powered up or reset. There are two different console specifications used on Alpha systems, and hence two classes of console firmware available:"
msgstr ""

#. Tag: para
#: boot-installer.xml:38
#, no-c-format
msgid "<emphasis>SRM console</emphasis>, based on the Alpha Console Subsystem specification, which provides an operating environment for OpenVMS, Tru64 UNIX, and Linux operating systems."
msgstr "Az Alpha konzol alrendszer specifikációra épülő <emphasis>SRM konzol</emphasis> egy OpenVMS, Tru64 UNIX és GNU/Linux operációs rendszerre való kezelő-környezetet ad."

#. Tag: para
#: boot-installer.xml:45
#, no-c-format
msgid "<emphasis>ARC, AlphaBIOS, or ARCSBIOS console</emphasis>, based on the Advanced RISC Computing (ARC) specification, which provides an operating environment for Windows NT."
msgstr "Az Advanced RISC Computing (ARC) specifikációra épülő <emphasis>ARC, AlphaBIOS és ARCSBIOS konzol</emphasis> egy Windows NT-hez készült kezelő-környezetet ad."

#. Tag: para
#: boot-installer.xml:54
#, no-c-format
msgid "From the user's perspective, the most important difference between SRM and ARC is that the choice of console constrains the possible disk-partitioning scheme for the hard disk which you wish to boot off of."
msgstr ""

#. Tag: para
#: boot-installer.xml:61
#, no-c-format
msgid "ARC requires that you use an MS-DOS partition table (as created by <command>cfdisk</command>) for the boot disk. Therefore MS-DOS partition tables are the <quote>native</quote> partition format when booting from ARC. In fact, since AlphaBIOS contains a disk partitioning utility, you may prefer to partition your disks from the firmware menus before installing Linux."
msgstr ""

#. Tag: para
#: boot-installer.xml:70
#, no-c-format
msgid "Conversely, SRM is <emphasis>incompatible</emphasis><footnote> <para> Specifically, the bootsector format required by the Console Subsystem Specification conflicts with the placement of the DOS partition table. </para> </footnote> with MS-DOS partition tables. Since Tru64 Unix uses the BSD disklabel format, this is the <quote>native</quote> partition format for SRM installations."
msgstr ""

#. Tag: para
#: boot-installer.xml:83
#, no-c-format
msgid "GNU/Linux is the only operating system on Alpha that can be booted from both console types, but &debian; &release; only supports booting on SRM-based systems. If you have an Alpha for which no version of SRM is available, if you will be dual-booting the system with Windows NT, or if your boot device requires ARC console support for BIOS initialization, you will not be able to use the &debian; &release; installer. You can still run &debian; &release; on such systems by using other install media; for instance, you can install Debian woody with MILO and upgrade."
msgstr ""

#. Tag: para
#: boot-installer.xml:94
#, no-c-format
msgid "Because <command>MILO</command> is not available for any of the Alpha systems currently in production (as of February 2000), and because it is no longer necessary to buy an OpenVMS or Tru64 Unix license to have SRM firmware on your older Alpha, it is recommended that you use SRM when possible."
msgstr ""

#. Tag: para
#: boot-installer.xml:102
#, no-c-format
msgid "The following table summarizes available and supported system type/console combinations (see <xref linkend=\"alpha-cpus\"/> for the system type names). The word <quote>ARC</quote> below denotes any of the ARC-compliant consoles."
msgstr "Az alábbi tábla összefoglalja az elérhető és támogatott rendszer-típus/konzol párokat (lásd az <xref linkend=\"alpha-cpus\"/> oldalt a rendszer-típus nevekért). Az <quote>ARC</quote> szó bármely ARC-kompatibilis konzolt jelöli."

#. Tag: entry
#: boot-installer.xml:114
#, no-c-format
msgid "System Type"
msgstr "Rendszer típus"

#. Tag: entry
#: boot-installer.xml:115
#, no-c-format
msgid "Console Type Supported"
msgstr "Támogatott konzol típus"

#. Tag: entry
#: boot-installer.xml:121
#, no-c-format
msgid "alcor"
msgstr "alcor"

#. Tag: entry
#: boot-installer.xml:122
#: boot-installer.xml:125
#: boot-installer.xml:131
#: boot-installer.xml:137
#: boot-installer.xml:140
#: boot-installer.xml:143
#: boot-installer.xml:146
#: boot-installer.xml:152
#: boot-installer.xml:155
#: boot-installer.xml:158
#: boot-installer.xml:167
#: boot-installer.xml:176
#: boot-installer.xml:191
#: boot-installer.xml:194
#, no-c-format
msgid "ARC or SRM"
msgstr "ARC vagy SRM"

#. Tag: entry
#: boot-installer.xml:124
#, no-c-format
msgid "avanti"
msgstr "avanti"

#. Tag: entry
#: boot-installer.xml:127
#, no-c-format
msgid "book1"
msgstr "book1"

#. Tag: entry
#: boot-installer.xml:128
#: boot-installer.xml:134
#: boot-installer.xml:149
#: boot-installer.xml:161
#: boot-installer.xml:170
#: boot-installer.xml:173
#: boot-installer.xml:179
#: boot-installer.xml:185
#: boot-installer.xml:188
#, no-c-format
msgid "SRM only"
msgstr "csak SRM"

#. Tag: entry
#: boot-installer.xml:130
#, no-c-format
msgid "cabriolet"
msgstr "cabriolet"

#. Tag: entry
#: boot-installer.xml:133
#, no-c-format
msgid "dp264"
msgstr "dp264"

#. Tag: entry
#: boot-installer.xml:136
#, no-c-format
msgid "eb164"
msgstr "eb164"

#. Tag: entry
#: boot-installer.xml:139
#, no-c-format
msgid "eb64p"
msgstr "eb64p"

#. Tag: entry
#: boot-installer.xml:142
#, no-c-format
msgid "eb66"
msgstr "eb66"

#. Tag: entry
#: boot-installer.xml:145
#, no-c-format
msgid "eb66p"
msgstr "eb66p"

#. Tag: entry
#: boot-installer.xml:148
#, no-c-format
msgid "jensen"
msgstr "jensen"

#. Tag: entry
#: boot-installer.xml:151
#, no-c-format
msgid "lx164"
msgstr "lx164"

#. Tag: entry
#: boot-installer.xml:154
#, no-c-format
msgid "miata"
msgstr "miata"

#. Tag: entry
#: boot-installer.xml:157
#, no-c-format
msgid "mikasa"
msgstr "mikasa"

#. Tag: entry
#: boot-installer.xml:160
#, no-c-format
msgid "mikasa-p"
msgstr "mikasa-p"

#. Tag: entry
#: boot-installer.xml:163
#, no-c-format
msgid "nautilus"
msgstr "nautilus"

#. Tag: entry
#: boot-installer.xml:164
#, no-c-format
msgid "ARC (see motherboard manual) or SRM"
msgstr "ARC (lásd az alaplap kézikönyvet) vagy SRM"

#. Tag: entry
#: boot-installer.xml:166
#, no-c-format
msgid "noname"
msgstr "névtelen"

#. Tag: entry
#: boot-installer.xml:169
#, no-c-format
msgid "noritake"
msgstr "noritake"

#. Tag: entry
#: boot-installer.xml:172
#, no-c-format
msgid "noritake-p"
msgstr "noritake-p"

#. Tag: entry
#: boot-installer.xml:175
#, no-c-format
msgid "pc164"
msgstr "pc164"

#. Tag: entry
#: boot-installer.xml:178
#, no-c-format
msgid "rawhide"
msgstr "rawhide"

#. Tag: entry
#: boot-installer.xml:181
#, no-c-format
msgid "ruffian"
msgstr "ruffian"

#. Tag: entry
#: boot-installer.xml:182
#: boot-installer.xml:197
#: boot-installer.xml:200
#, no-c-format
msgid "ARC only"
msgstr "csak ARC"

#. Tag: entry
#: boot-installer.xml:184
#, no-c-format
msgid "sable"
msgstr "sable"

#. Tag: entry
#: boot-installer.xml:187
#, no-c-format
msgid "sable-g"
msgstr "sable-g"

#. Tag: entry
#: boot-installer.xml:190
#, no-c-format
msgid "sx164"
msgstr "sx164"

#. Tag: entry
#: boot-installer.xml:193
#, no-c-format
msgid "takara"
msgstr "takara"

#. Tag: entry
#: boot-installer.xml:196
#, no-c-format
msgid "<entry>xl</entry>"
msgstr "<entry>xl</entry>"

#. Tag: entry
#: boot-installer.xml:199
#, no-c-format
msgid "<entry>xlt</entry>"
msgstr "<entry>xlt</entry>"

#. Tag: para
#: boot-installer.xml:207
#, no-c-format
msgid "Generally, none of these consoles can boot Linux directly, so the assistance of an intermediary bootloader is required. For the SRM console, <command>aboot</command>, a small, platform-independent bootloader, is used. See the (unfortunately outdated) <ulink url=\"&url-srm-howto;\">SRM HOWTO</ulink> for more information on <command>aboot</command>."
msgstr "Általában e konzolok nem indítanak Linuxot, így egy köztes boot betöltő szükséges. Az SRM konzolokhoz az <command>aboot</command>, egy kis, platform-független boot-betöltő használatos. Lásd az (immár sajnos elavult) <ulink url=\"&url-srm-howto;\">SRM HOGYAN</ulink> <command>aboot</command> leírást."

#. Tag: para
#: boot-installer.xml:216
#, no-c-format
msgid "The following paragraphs are from the woody install manual, and are included here for reference; they may be useful to someone at a later date when Debian supports MILO-based installs again."
msgstr "Az alábbi bekezdések a woody telepítő kézikönyvből valók, melyre itt hivatkozunk; hasznosak lesznek később, mikor a Debian ismét támogatja a MILO-alapú telepítést."

#. Tag: para
#: boot-installer.xml:222
#, no-c-format
msgid "Generally, none of these consoles can boot Linux directly, so the assistance of an intermediary bootloader is required. There are two mainstream Linux loaders: <command>MILO</command> and <command>aboot</command>."
msgstr "Általában e konzolok nem indítanak Linuxot, így egy köztes boot betöltő szükséges. 2 népszerű van: a <command>MILO</command> és az <command>aboot</command>."

#. Tag: para
#: boot-installer.xml:228
#, no-c-format
msgid "<command>MILO</command> is itself a console, which replaces ARC or SRM in memory. <command>MILO</command> can be booted from both ARC and SRM and is the only way to bootstrap Linux from the ARC console. <command>MILO</command> is platform-specific (a different <command>MILO</command> is needed for each system type) and exist only for those systems, for which ARC support is shown in the table above. See also the (unfortunately outdated) <ulink url=\"&url-milo-howto;\">MILO HOWTO</ulink>."
msgstr "A <command>MILO</command> maga egy konzol, mely az ARC vagy SRM helyére kerül a memóriában. A <command>MILO</command> ARC és SRM alól is indítható és ARC konzolról csak ezzel indítható a Linux. A <command>MILO</command> platform-függő (külön <command>MILO</command> kell minden rebdszer-típushoz) és csak a fenti táblában ARC-támogatást mutató rendszerekhez van. Lásd a (sajnos elavult) <ulink url=\"&url-milo-howto;\">MILO HOGYAN</ulink>-t is."

#. Tag: para
#: boot-installer.xml:238
#, no-c-format
msgid "<command>aboot</command> is a small, platform-independent bootloader, which runs from SRM only. See the (also unfortunately outdated) <ulink url=\"&url-srm-howto;\">SRM HOWTO</ulink> for more information on <command>aboot</command>."
msgstr "Az <command>aboot</command> egy kis, platform-független boot betöltő, mely csak SRM alól fut. Lásd az (immár sajnos elavult) <ulink url=\"&url-srm-howto;\">SRM HOGYAN</ulink> <command>aboot</command> leírást."

#. Tag: para
#: boot-installer.xml:245
#, no-c-format
msgid ""
"Thus, three scenarios are generally possible, depending on the system's console firmware and whether or not <command>MILO</command> is available: <informalexample><screen>\n"
"SRM -&gt; aboot\n"
"SRM -&gt; MILO\n"
"ARC -&gt; MILO\n"
"</screen></informalexample> Because <command>MILO</command> is not available for any of the Alpha systems currently in production (as of February 2000), and because it is no longer necessary to buy an OpenVMS or Tru64 Unix license to have SRM firmware on your older Alpha, it is recommended that you use SRM and <command>aboot</command> on new installations of GNU/Linux, unless you wish to dual-boot with Windows NT."
msgstr ""

#. Tag: para
#: boot-installer.xml:260
#, no-c-format
msgid "The majority of AlphaServers and all current server and workstation products contain both SRM and AlphaBIOS in their firmware. For <quote>half-flash</quote> machines such as the various evaluation boards, it is possible to switch from one version to another by reflashing the firmware. Also, once SRM is installed, it is possible to run ARC/AlphaBIOS from a floppy disk (using the <command>arc</command> command). For the reasons mentioned above, we recommend switching to SRM before installing &debian;."
msgstr ""

#. Tag: para
#: boot-installer.xml:271
#, no-c-format
msgid "As on other architectures, you should install the newest available revision of the firmware<footnote> <para> Except on Jensen, where Linux is not supported on firmware versions newer than 1.7 &mdash; see <ulink url=\"&url-jensen-howto;\"></ulink> for more information. </para> </footnote> before installing &debian;. For Alpha, firmware updates can be obtained from <ulink url=\"&url-alpha-firmware;\">Alpha Firmware Updates</ulink>."
msgstr ""

#. Tag: title
#: boot-installer.xml:290
#: boot-installer.xml:1015
#: boot-installer.xml:1506
#: boot-installer.xml:2001
#: boot-installer.xml:2083
#: boot-installer.xml:2172
#: boot-installer.xml:2522
#: boot-installer.xml:2621
#, no-c-format
msgid "Booting with TFTP"
msgstr "Indítás TFTP segítségével"

#. Tag: para
#: boot-installer.xml:291
#, no-c-format
msgid ""
"In SRM, Ethernet interfaces are named with the <userinput>ewa</userinput> prefix, and will be listed in the output of the <userinput>show dev</userinput> command, like this (edited slightly): <informalexample><screen>\n"
"&gt;&gt;&gt; show dev\n"
"ewa0.0.0.9.0               EWA0              08-00-2B-86-98-65\n"
"ewb0.0.0.11.0              EWB0              08-00-2B-86-98-54\n"
"ewc0.0.0.2002.0            EWC0              00-06-2B-01-32-B0\n"
"</screen></informalexample> You first need to set the boot protocol: <informalexample><screen>\n"
"&gt;&gt;&gt; set ewa0_protocols bootp\n"
"</screen></informalexample> Then check the medium type is correct: <informalexample><screen>\n"
"&gt;&gt;&gt; set ewa0_mode <replaceable>mode</replaceable>\n"
"</screen></informalexample> You can get a listing of valid modes with <userinput>&gt;&gt;&gt;set ewa0_mode</userinput>."
msgstr ""
"SRM esetén az Ethernet csatolók <userinput>ewa</userinput> előtagot kapnak és a <userinput>show dev</userinput> parancs kiírja őket így (kissé szerkesztve):<informalexample><screen>\n"
"&gt;&gt;&gt; show dev\n"
"ewa0.0.0.9.0               EWA0              08-00-2B-86-98-65\n"
"ewb0.0.0.11.0              EWB0              08-00-2B-86-98-54\n"
"ewc0.0.0.2002.0            EWC0              00-06-2B-01-32-B0\n"
"</screen></informalexample> Először be kell állítani az indító protokollt: <informalexample><screen>\n"
"&gt;&gt;&gt; set ewa0_protocols bootp\n"
"</screen></informalexample> Majd ellenőrizni a médium típust:<informalexample><screen>\n"
"&gt;&gt;&gt; set ewa0_mode <replaceable>mód</replaceable>\n"
"</screen></informalexample> Az érvényes módok így írhatók ki: <userinput>&gt;&gt;&gt;set ewa0_mode</userinput>."

#. Tag: para
#: boot-installer.xml:309
#, no-c-format
msgid ""
"Then, to boot from the first Ethernet interface, you would type: <informalexample><screen>\n"
"&gt;&gt;&gt; boot ewa0 -flags \"\"\n"
"</screen></informalexample> This will boot using the default kernel parameters as included in the netboot image."
msgstr ""
"Majd az 1. Ethernet csatolóról való indításhoz ezt kell beírni: <informalexample><screen>\n"
"&gt;&gt;&gt; boot ewa0 -flags \"\"\n"
"</screen></informalexample> Ez netboot képben lévő alap kernel paraméterekkel indít."

#. Tag: para
#: boot-installer.xml:318
#, no-c-format
msgid "If you wish to use a serial console, you <emphasis>must</emphasis> pass the <userinput>console=</userinput> parameter to the kernel. This can be done using the <userinput>-flags</userinput> argument to the SRM <userinput>boot</userinput> command. The serial ports are named the same as their corresponding files in <userinput>/dev</userinput>. Also, when specifying additional kernel parameters, you must repeat certain default options that are needed by the &d-i; images. For example, to boot from <userinput>ewa0</userinput> and use a console on the first serial port, you would type:"
msgstr "Soros konzol esetén át <emphasis>kell</emphasis> adni a <userinput>console=</userinput> paramétert a kernelnek. Ez az SRM <userinput>boot</userinput> parancsnak adott <userinput>-flags</userinput> argumentummal tehető. A soros portok a <userinput>/dev</userinput> könyvtárban lévő megfelelő fájlokkal nevezhetők. További kernel paraméterek megadásakor meg kell ismételni egyes alapértelmezett opciókat, melyek kellenek a &d-i; képekhez. Például az <userinput>ewa0</userinput> eszközről indításhoz az 1. soros port használatakor ezt kell beírni:"

#. Tag: screen
#: boot-installer.xml:330
#, no-c-format
msgid "&gt;&gt;&gt; boot ewa0 -flags &quot;root=/dev/ram ramdisk_size=16384 console=ttyS0&quot;"
msgstr "&gt;&gt;&gt; boot ewa0 -flags &quot;root=/dev/ram ramdisk_size=16384 console=ttyS0&quot;"

#. Tag: title
#: boot-installer.xml:335
#, no-c-format
msgid "Booting from CD-ROM with the SRM Console"
msgstr "Indítás CD-ROM lemezről az SRM konzollal"

#. Tag: para
#: boot-installer.xml:336
#, no-c-format
msgid ""
"The &debian; install CDs include several preconfigured boot options for VGA and serial consoles. Type <informalexample><screen>\n"
"&gt;&gt;&gt; boot xxxx -flags 0\n"
"</screen></informalexample> to boot using VGA console, where <replaceable>xxxx</replaceable> is your CD-ROM drive in SRM notation. To use serial console on the first serial device, type <informalexample><screen>\n"
"&gt;&gt;&gt; boot xxxx -flags 1\n"
"</screen></informalexample> and for console on the second serial port, type"
msgstr ""

#. Tag: screen
#: boot-installer.xml:351
#, no-c-format
msgid "&gt;&gt;&gt; boot xxxx -flags 2"
msgstr ""

#. Tag: title
#: boot-installer.xml:357
#, no-c-format
msgid "Booting from CD-ROM with the ARC or AlphaBIOS Console"
msgstr "Indítás CD-ROM lemezről az ARC vagy AlphaBIOS konzollal"

#. Tag: para
#: boot-installer.xml:358
#, no-c-format
msgid "To boot a CD-ROM from the ARC console, find your sub-architecture code name (see <xref linkend=\"alpha-cpus\"/>), then enter <filename>\\milo\\linload.exe</filename> as the boot loader and <filename>\\milo\\<replaceable>subarch</replaceable></filename> (where <replaceable>subarch</replaceable> is the proper subarchitecture name) as the OS Path in the `OS Selection Setup' menu. Ruffians make an exception: You need to use <filename>\\milo\\ldmilo.exe</filename> as boot loader."
msgstr "Egy CD-ROM indításakor az ARC konzolról, keresd meg az al-architektúra kód nevet (lásd az <xref linkend=\"alpha-cpus\"/> leírást), majd add meg a <filename>\\milo\\linload.exe</filename> fájlt mint boot betöltő és a <filename>\\milo\\<replaceable>subarch</replaceable></filename> fájlt (ahol a <replaceable>subarch</replaceable> a helyes al-architektúra név) mint OS útvonal az `OS Selection Setup' menüben. A Ruffian kivétel: a <filename>\\milo\\ldmilo.exe</filename> fájl kell mint boot betöltő."

#. Tag: title
#: boot-installer.xml:374
#, no-c-format
msgid "Booting from Floppies with the SRM Console"
msgstr "Indítás flopiról az SRM konzollal"

#. Tag: para
#: boot-installer.xml:375
#, no-c-format
msgid ""
"At the SRM prompt (<prompt>&gt;&gt;&gt;</prompt>), issue the following command: <informalexample><screen>\n"
"&gt;&gt;&gt; boot dva0 -flags 0\n"
"</screen></informalexample> possibly replacing <filename>dva0</filename> with the actual device name. Usually, <filename>dva0</filename> is the floppy; type <informalexample><screen>\n"
"&gt;&gt;&gt; show dev\n"
"</screen></informalexample> to see the list of devices (e.g., if you want to boot from a CD). Note that if you are booting via MILO, <command>-flags</command> argument is ignored, so you can just type <command>boot dva0</command>. If everything works OK, you will eventually see the Linux kernel boot."
msgstr ""
"Az SRM jelnél (<prompt>&gt;&gt;&gt;</prompt>) add ki az alábbi parancsot: <informalexample><screen>\n"
"&gt;&gt;&gt; boot dva0 -flags 0\n"
"</screen></informalexample> ha kell cserélve a <filename>dva0</filename>-t az aktuális eszköz nevével. Általában a <filename>dva0</filename> a flopi; a <informalexample><screen>\n"
"&gt;&gt;&gt; show dev\n"
"</screen></informalexample> sorolja fel az eszközöket (például ha CD-lemezről akarsz indítani). A MILO általi indításkor a <command>-flags</command> argumentum nem számít, csak a <command>boot dva0</command> parancs kell. Ha minden jól működik, a Linux kernel azonnal elindul."

#. Tag: para
#: boot-installer.xml:392
#, no-c-format
msgid ""
"If you want to specify kernel parameters when booting via <command>aboot</command>, use the following command: <informalexample><screen>\n"
"&gt;&gt;&gt; boot dva0 -file linux.bin.gz -flags \"root=/dev/fd0 load_ramdisk=1 arguments\"\n"
"</screen></informalexample> (typed on one line), substituting, if necessary, the actual SRM boot device name for <filename>dva0</filename>, the Linux boot device name for <filename>fd0</filename>, and the desired kernel parameters for <filename>arguments</filename>."
msgstr ""
"Ha kernel paramétereket akarsz megadni az <command>aboot</command> indításkor, használd az alábbi parancsot:<informalexample><screen>\n"
"&gt;&gt;&gt; boot dva0 -file linux.bin.gz -flags \"root=/dev/fd0 load_ramdisk=1 arguments\"\n"
"</screen></informalexample> (egy sorban), cseréld, ha kell, a <filename>dva0</filename> aktuális SRM indító eszköz nevet, az <filename>fd0</filename> Linux indító eszköz nevet és az <filename>arguments</filename> kívánt kernel paramétereket."

#. Tag: para
#: boot-installer.xml:404
#, no-c-format
msgid "If you want to specify kernel parameters when booting via <command>MILO</command>, you will have to interrupt bootstrap once you get into MILO. See <xref linkend=\"booting-from-milo\"/>."
msgstr "Ha kernel paramétereket akarsz megadni az <command>MILO</command> indításkor, a MILO betöltőbe lépve egyszer meg kell szakítanod az indítást. Lásd a <xref linkend=\"booting-from-milo\"/> leírást."

#. Tag: title
#: boot-installer.xml:414
#, no-c-format
msgid "Booting from Floppies with the ARC or AlphaBIOS Console"
msgstr "Indítás flopiról az ARC vagy AlphaBIOS konzollal"

#. Tag: para
#: boot-installer.xml:416
#, no-c-format
msgid "In the OS Selection menu, set <command>linload.exe</command> as the boot loader, and <command>milo</command> as the OS Path. Bootstrap using the newly created entry."
msgstr "Az OS Választás menüben állítsd be a <command>linload.exe</command> fájlt boot betöltőként és a <command>milo</command>-t OS útvonalként. Indíts az újonnan létrehozott beállításokkal."

#. Tag: title
#: boot-installer.xml:425
#, no-c-format
msgid "Booting with MILO"
msgstr "Indítás MILO segítségével"

#. Tag: para
#: boot-installer.xml:426
#, no-c-format
msgid "MILO contained on the bootstrap media is configured to proceed straight to Linux automatically. Should you wish to intervene, all you need is to press space during MILO countdown."
msgstr "AZ indító médián lévő MILO eleve Linux indításra állított. Ha mégis beavatkoznál csak a szóközt kell leütnöd a MILO visszaszámlálás alatt."

#. Tag: para
#: boot-installer.xml:432
#, no-c-format
msgid ""
"If you want to specify all the bits explicitly (for example, to supply additional parameters), you can use a command like this: <informalexample><screen>\n"
"MILO> boot fd0:linux.bin.gz root=/dev/fd0 load_ramdisk=1 <!-- arguments -->\n"
"</screen></informalexample> If you are booting from something other than a floppy, substitute <filename>fd0</filename> in the above example with the appropriate device name in Linux notation. The <command>help</command> command would give you a brief MILO command reference."
msgstr ""
"Ha mindent magad akarsz megadni (például további paramétereket) hasonló parancs használható:<informalexample><screen>\n"
"MILO> boot fd0:linux.bin.gz root=/dev/fd0 load_ramdisk=1 <!-- arguments -->\n"
"</screen></informalexample> Ha flopi helyett mást indítsz, cseréld a fenti példa <filename>fd0</filename> nevet a megfelelő eszköz nevére Linux szerint. A <command>help</command> parancs röviden leírja a MILO parancsait."

#. Tag: title
#: boot-installer.xml:451
#, no-c-format
msgid "Booting from TFTP"
msgstr "Indítás TFTP segítségével"

#. Tag: para
#: boot-installer.xml:457
#: boot-installer.xml:1021
#: boot-installer.xml:1524
#: boot-installer.xml:2007
#: boot-installer.xml:2528
#: boot-installer.xml:2627
#, no-c-format
msgid "Booting from the network requires that you have a network connection and a TFTP network boot server (DHCP, RARP, or BOOTP)."
msgstr "A hálózati indítás egy hálózati kapcsolatot és egy TFTP hálózati indító kiszolgálót igényel (DHCP, RARP vagy BOOTP)."

#. Tag: para
#: boot-installer.xml:462
#: boot-installer.xml:1026
#: boot-installer.xml:1529
#: boot-installer.xml:2012
#: boot-installer.xml:2533
#: boot-installer.xml:2632
#, no-c-format
msgid "Older systems such as the 715 might require the use of an RBOOT server instead of a BOOTP server."
msgstr "A régebbi rendszerek, például a 715 egy RBOOT kiszolgálót kérhetnek BOOTP helyett."

#. Tag: para
#: boot-installer.xml:467
#: boot-installer.xml:1031
#: boot-installer.xml:1534
#: boot-installer.xml:2017
#: boot-installer.xml:2538
#: boot-installer.xml:2637
#, no-c-format
msgid "The installation method to support network booting is described in <xref linkend=\"install-tftp\"/>."
msgstr "A hálózati indítást támogató telepítő mód leírása itt található: <xref linkend=\"install-tftp\"/>."

#. Tag: title
#: boot-installer.xml:475
#, no-c-format
msgid "Booting from TFTP on Netwinder"
msgstr "TFTP indítás Netwinder gépen"

#. Tag: para
#: boot-installer.xml:476
#, no-c-format
msgid "Netwinders have two network interfaces: A 10Mbps NE2000-compatible card (which is generally referred to as <literal>eth0</literal>) and a 100Mbps Tulip card. There may be problems loading the image via TFTP using the 100Mbps card so it is recommended that you use the 10Mbps interface (the one labeled with <literal>10 Base-T</literal>)."
msgstr "A Netwinder gépeknek 2 hálózati csatolója van: egy 10Mbps  NE2000-kompatibilis kártya (általában <literal>eth0</literal>) és egy 100Mbps Tulip kártya. Utóbbival gondok lehetnek a kép TFTP letöltésekor így ajánlott a 10Mbps csatoló használata (a <literal>10 Base-T</literal> címkéjű)."

#. Tag: para
#: boot-installer.xml:485
#, no-c-format
msgid "You need NeTTrom 2.2.1 or later to boot the installation system, and version 2.3.3 is recommended. Unfortunately, firmware files are currently not available for download because of license issues. If this situation changes, you may find new images at <ulink url=\"http//www.netwinder.org/\"></ulink>."
msgstr ""

#. Tag: para
#: boot-installer.xml:493
#, no-c-format
msgid ""
"When you boot your Netwinder you have to interrupt the boot process during the countdown. This allows you to set a number of firmware settings needed in order to boot the installer. First of all, start by loading the default settings: <informalexample><screen>\n"
"    NeTTrom command-&gt; load-defaults\n"
"</screen></informalexample> Furthermore, you must configure the network, either with a static address: <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv netconfig_eth0 flash\n"
"    NeTTrom command-&gt; setenv eth0_ip 192.168.0.10/24\n"
"</screen></informalexample> where 24 is the number of set bits in the netmask, or a dynamic address: <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv netconfig_eth0 dhcp\n"
"</screen></informalexample> You may also need to configure the <userinput>route1</userinput> settings if the TFTP server is not on the local subnet. Following these settings, you have to specify the TFTP server and the location of the image. You can then store your settings to flash. <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv kerntftpserver 192.168.0.1\n"
"    NeTTrom command-&gt; setenv kerntftpfile boot.img\n"
"    NeTTrom command-&gt; save-all\n"
"</screen></informalexample> Now you have to tell the firmware that the TFTP image should be booted: <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv kernconfig tftp\n"
"    NeTTrom command-&gt; setenv rootdev /dev/ram\n"
"</screen></informalexample> If you use a serial console to install your Netwinder, you need to add the following setting: <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv cmdappend root=/dev/ram console=ttyS0,115200\n"
"</screen></informalexample> Alternatively, for installations using a keyboard and monitor you have to set: <informalexample><screen>\n"
"    NeTTrom command-&gt; setenv cmdappend root=/dev/ram\n"
"</screen></informalexample> You can use the <command>printenv</command> command to review your environment settings. After you have verified that the settings are correct, you can load the image: <informalexample><screen>\n"
"    NeTTrom command-&gt; boot\n"
"</screen></informalexample> In case you run into any problems, a <ulink url=\"http://www.netwinder.org/howto/Firmware-HOWTO.html\">detailed HOWTO</ulink> is available."
msgstr ""

#. Tag: title
#: boot-installer.xml:545
#, no-c-format
msgid "Booting from TFTP on CATS"
msgstr "Indítás TFTP segítségével CATS rendszeren"

#. Tag: para
#: boot-installer.xml:546
#, no-c-format
msgid "On CATS machines, use <command>boot de0:</command> or similar at the Cyclone prompt."
msgstr ""

#. Tag: title
#: boot-installer.xml:556
#, no-c-format
msgid "Booting from CD-ROM"
msgstr "Indítás CD-ROM lemezről"

#. Tag: para
#: boot-installer.xml:562
#: boot-installer.xml:732
#: boot-installer.xml:1143
#: boot-installer.xml:1964
#: boot-installer.xml:2310
#: boot-installer.xml:2665
#, no-c-format
msgid "The easiest route for most people will be to use a set of Debian CDs. If you have a CD set, and if your machine supports booting directly off the CD, great! Simply <phrase arch=\"x86\"> configure your system for booting off a CD as described in <xref linkend=\"boot-dev-select\"/>, </phrase> insert your CD, reboot, and proceed to the next chapter."
msgstr "A legtöbb felhasználó számára a legegyszerűbb mód a Debian CD-készlet használata. Ha van egy CD-készleted és a géped támogatja a CD-lemezről indítást, akkor minden csodás. Egyszerűen <phrase arch=\"x86\"> állítsd be a gépet, hogy CD-lemezről induljon, ahogy a <xref linkend=\"boot-dev-select\"/> részben is leírjuk, </phrase> tedd be a CD-lemezt, indítsd róla a gépet és végezd el a telepítést, erről a következő fejezet súg."

#. Tag: para
#: boot-installer.xml:573
#: boot-installer.xml:743
#: boot-installer.xml:1154
#: boot-installer.xml:1975
#: boot-installer.xml:2321
#: boot-installer.xml:2676
#, no-c-format
msgid "Note that certain CD drives may require special drivers, and thus be inaccessible in the early installation stages. If it turns out the standard way of booting off a CD doesn't work for your hardware, revisit this chapter and read about alternate kernels and installation methods which may work for you."
msgstr "Egyes CD-eszközök különleges meghajtókat igényelnek és elérhetetlenek lehetnek a telepítő első lépéseiben. Ha a CD-lemezről indítás szokásos módja nem működik a gépeden, nézd át újra e fejezetet és olvasd el az eltérő kernelekről és telepítő módokról szóló részeket, mely megoldja ezt."

#. Tag: para
#: boot-installer.xml:581
#: boot-installer.xml:751
#: boot-installer.xml:1162
#: boot-installer.xml:1983
#: boot-installer.xml:2329
#: boot-installer.xml:2684
#, no-c-format
msgid "Even if you cannot boot from CD-ROM, you can probably install the Debian system components and any packages you want from CD-ROM. Simply boot using a different media, such as floppies. When it's time to install the operating system, base system, and any additional packages, point the installation system at the CD-ROM drive."
msgstr "Még abban az esetben is, ha nem tudsz CD-ROM lemezről indítani, valószínűleg képes leszel a Debian rendszer összetevőit és a kívánt csomagokat telepíteni ezekről. Egyszerűen indíts más médiumról, például flopiról. Az operációs rendszer, alaprendszer és tetszőleges további csomagok telepítésekor a telepítő rendszert a CD-ROM meghajtóra irányíthatod."

#. Tag: para
#: boot-installer.xml:589
#: boot-installer.xml:759
#: boot-installer.xml:1170
#: boot-installer.xml:1991
#: boot-installer.xml:2337
#: boot-installer.xml:2692
#, no-c-format
msgid "If you have problems booting, see <xref linkend=\"boot-troubleshooting\"/>."
msgstr "Ha gondjaid vannak ez indítással, lásd az <xref linkend=\"boot-troubleshooting\"/> részt."

#. Tag: para
#: boot-installer.xml:596
#, no-c-format
msgid "To boot a CD-ROM from the Cyclone console prompt, use the command <command>boot cd0:cats.bin</command>"
msgstr "Egy CD-ROM indításához Cyclone konzol jelről, használd a <command>boot cd0:cats.bin</command> parancsot"

#. Tag: title
#: boot-installer.xml:605
#, no-c-format
msgid "Booting from Firmware"
msgstr "Indítás firmware-ből"

#. Tag: para
#: boot-installer.xml:611
#, no-c-format
msgid "There is an increasing number of consumer devices that directly boot from a flash chip on the device. The installer can be written to flash so it will automatically start when you reboot your machines."
msgstr ""

#. Tag: para
#: boot-installer.xml:617
#, no-c-format
msgid "In many cases, changing the firmware of an embedded device voids your warranty. Sometimes you are also not able to recover your device if there are problems during the flashing process. Therefore, please take care and follow the steps precisely."
msgstr ""

#. Tag: title
#: boot-installer.xml:628
#, no-c-format
msgid "Booting the NSLU2"
msgstr "Az NLSU2 indítása"

#. Tag: para
#: boot-installer.xml:629
#, no-c-format
msgid "There are three ways how to put the installer firmware into flash:"
msgstr ""

#. Tag: title
#: boot-installer.xml:635
#, no-c-format
msgid "Using the NSLU2 web interface"
msgstr ""

#. Tag: para
#: boot-installer.xml:636
#, no-c-format
msgid "Go to the administration section and choose the menu item <literal>Upgrade</literal>. You can then browse your disk for the installer image you have previously downloaded. Then press the <literal>Start Upgrade</literal> button, confirm, wait for a few minutes and confirm again. The system will then boot straight into the installer."
msgstr ""

#. Tag: title
#: boot-installer.xml:647
#, no-c-format
msgid "Via the network using Linux/Unix"
msgstr ""

#. Tag: para
#: boot-installer.xml:648
#, no-c-format
msgid ""
"You can use <command>upslug2</command> from any Linux or Unix machine to upgrade the machine via the network. This software is packaged for Debian. First, you have to put your NSLU2 in upgrade mode: <orderedlist> <listitem><para> Disconnect any disks and/or devices from the USB ports. </para></listitem> <listitem><para> Power off the NSLU2 </para></listitem> <listitem><para> Press and hold the reset button (accessible through the small hole on the back just above the power input). </para></listitem> <listitem><para> Press and release the power button to power on the NSLU2. </para></listitem> <listitem><para> Wait for 10 seconds watching the ready/status LED. After 10 seconds it will change from amber to red. Immediately release the reset button. </para></listitem> <listitem><para> The NSLU2 ready/status LED will flash alternately red/green (there is a 1 second delay before the first green). The NSLU2 is now in upgrade mode. </para></listitem> </orderedlist> See the <ulink url=\"http://www.nslu2-linux.org/wiki/OpenSlug/UsingTheBinary\">NSLU2-Linux pages</ulink> if you have problems with this. Once your NSLU2 is in upgrade mode, you can flash the new image: <informalexample><screen>\n"
"sudo upslug2 -i di-nslu2.bin\n"
"</screen></informalexample> Note that the tool also shows the MAC address of your NSLU2, which may come in handy to configure your DHCP server. After the whole image has been written and verified, the system will automatically reboot. Make sure you connect your USB disk again now, otherwise the installer won't be able to find it."
msgstr ""

#. Tag: title
#: boot-installer.xml:709
#, no-c-format
msgid "Via the network using Windows"
msgstr ""

#. Tag: para
#: boot-installer.xml:710
#, no-c-format
msgid "There is <ulink url=\"http://www.everbesthk.com/8-download/sercomm/firmware/all_router_utility.zip\">a tool</ulink> for Windows to upgrade the firmware via the network."
msgstr ""

#. Tag: title
#: boot-installer.xml:726
#: boot-installer.xml:1137
#: boot-installer.xml:1952
#: boot-installer.xml:2304
#: boot-installer.xml:2659
#, no-c-format
msgid "Booting from a CD-ROM"
msgstr "Indítás egy CD-ROM lemezről"

#. Tag: title
#: boot-installer.xml:864
#, no-c-format
msgid "Booting from Linux Using <command>LILO</command> or <command>GRUB</command>"
msgstr "Indítás Linuxból <command>LILO</command> vagy <command>GRUB</command> használatával"

#. Tag: para
#: boot-installer.xml:867
#, no-c-format
msgid "To boot the installer from hard disk, you must first download and place the needed files as described in <xref linkend=\"boot-drive-files\"/>."
msgstr "A telepítő merevlemezről indításához először le kell tölteni és elhelyezni a <xref linkend=\"boot-drive-files\"/> részben írt fájlokat."

#. Tag: para
#: boot-installer.xml:872
#, no-c-format
msgid "If you intend to use the hard drive only for booting and then download everything over the network, you should download the <filename>netboot/debian-installer/&architecture;/initrd.gz</filename> file and its corresponding kernel <filename>netboot/debian-installer/&architecture;/linux</filename>. This will allow you to repartition the hard disk from which you boot the installer, although you should do so with care."
msgstr "Ha a merevlemez csak indításra a többi letöltésre pedig a hálózat szolgál, a <filename>netboot/debian-installer/&architecture;/initrd.gz</filename> fájl és a megfelelő <filename>netboot/debian-installer/&architecture;/linux</filename> kernel letöltése kell. Ezzel átparticionálható a telepítő indítására használt merevlemez, körültekintően."

#. Tag: para
#: boot-installer.xml:882
#, no-c-format
msgid "Alternatively, if you intend to keep an existing partition on the hard drive unchanged during the install, you can download the <filename>hd-media/initrd.gz</filename> file and its kernel, as well as copy a CD iso to the drive (make sure the file is named ending in <literal>.iso</literal>). The installer can then boot from the drive and install from the CD image, without needing the network."
msgstr "Ha egy merevlemez-partíció változatlan marad a telepítés során, lehetőség nyílik a <filename>hd-media/initrd.gz</filename> fájl, hozzávaló kernel és egy CD iso letöltésére (az utóbbi fájl nevének vége maradjon <literal>.iso</literal>). A telepítő indíthat a meghajtóról és képes telepíteni a CD képről hálózat nélkül."

#. Tag: para
#: boot-installer.xml:891
#, no-c-format
msgid "For <command>LILO</command>, you will need to configure two essential things in <filename>/etc/lilo.conf</filename>: <itemizedlist> <listitem><para> to load the <filename>initrd.gz</filename> installer at boot time; </para></listitem> <listitem><para> have the <filename>vmlinuz</filename> kernel use a RAM disk as its root partition. </para></listitem> </itemizedlist> Here is a <filename>/etc/lilo.conf</filename> example:"
msgstr "<command>LILO</command> esetén 2 dolgot kell beállítani a <filename>/etc/lilo.conf</filename> fájlban, melyek: <itemizedlist> <listitem><para> az <filename>initrd.gz</filename> telepítő betöltése induláskor; </para></listitem> <listitem><para> a <filename>vmlinuz</filename> kernel egy RAM lemezt használjon gyökér-partícióként. </para></listitem> </itemizedlist> Itt egy példa <filename>/etc/lilo.conf</filename>:"

#. Tag: screen
#: boot-installer.xml:912
#, no-c-format
msgid ""
"image=/boot/newinstall/vmlinuz\n"
"       label=newinstall\n"
"       initrd=/boot/newinstall/initrd.gz"
msgstr ""
"image=/boot/newinstall/vmlinuz\n"
"       label=newinstall\n"
"       initrd=/boot/newinstall/initrd.gz"

#. Tag: para
#: boot-installer.xml:912
#, no-c-format
msgid "For more details, refer to the <citerefentry><refentrytitle>initrd</refentrytitle> <manvolnum>4</manvolnum></citerefentry> and <citerefentry><refentrytitle>lilo.conf</refentrytitle> <manvolnum>5</manvolnum></citerefentry> man pages. Now run <userinput>lilo</userinput> and reboot."
msgstr "További részletekért lásd az <citerefentry><refentrytitle>initrd</refentrytitle> <manvolnum>4</manvolnum></citerefentry> és <citerefentry><refentrytitle>lilo.conf</refentrytitle> <manvolnum>5</manvolnum></citerefentry> man oldalakat. Futtasd a <userinput>lilo</userinput>-t és indíts újra."

#. Tag: para
#: boot-installer.xml:921
#, no-c-format
msgid ""
"The procedure for <command>GRUB</command> is quite similar. Locate your <filename>menu.lst</filename> in the <filename>/boot/grub/</filename> directory (sometimes in the <filename>/boot/boot/grub/</filename>), add the following lines: <informalexample><screen>\n"
"title  New Install\n"
"kernel (hd0,0)/boot/newinstall/vmlinuz\n"
"initrd (hd0,0)/boot/newinstall/initrd.gz\n"
"</screen></informalexample> and reboot."
msgstr ""
"A <command>GRUB</command> hasonló. Menj a <filename>menu.lst</filename> fájlra a <filename>/boot/grub/</filename> (néha a <filename>/boot/boot/grub/</filename>) könyvtárban, add hozzá a következő sorokat: <informalexample><screen>\n"
"title  New Install\n"
"kernel (hd0,0)/boot/newinstall/vmlinuz\n"
"initrd (hd0,0)/boot/newinstall/initrd.gz\n"
"</screen></informalexample> és indíts újra."

#. Tag: para
#: boot-installer.xml:932
#, no-c-format
msgid "Note that the value of the <userinput>ramdisk_size</userinput> may need to be adjusted for the size of the initrd image. From here on, there should be no difference between <command>GRUB</command> or <command>LILO</command>."
msgstr "A <userinput>ramdisk_size</userinput> értéke természetesen nem lehet kisebb, mint ami az initrd képhez szükséges. Innentől nincs különbség a <command>GRUB</command> vagy <command>LILO</command> között."

#. Tag: title
#: boot-installer.xml:943
#, no-c-format
msgid "Booting from USB Memory Stick"
msgstr "Indítás USB tárról"

#. Tag: para
#: boot-installer.xml:944
#, no-c-format
msgid "Let's assume you have prepared everything from <xref linkend=\"boot-dev-select\"/> and <xref linkend=\"boot-usb-files\"/>. Now just plug your USB stick into some free USB connector and reboot the computer. The system should boot up, and you should be presented with the <prompt>boot:</prompt> prompt. Here you can enter optional boot arguments, or just hit &enterkey;."
msgstr "A korábbi <xref linkend=\"boot-dev-select\"/> és <xref linkend=\"boot-usb-files\"/> részben írtak elkészültét feltételezzük. Dugd be az USB tárolót egy szabad USB csatlakozóba és indítsd újra a gépet. Ha minden rendben, a rendszer erről fog indulni és erről ad egy <prompt>boot:</prompt> jelet. A 2 lehetőség: további indító argumentumok megadása vagy az &enterkey; leütése."

#. Tag: title
#: boot-installer.xml:957
#: boot-installer.xml:2064
#: boot-installer.xml:2567
#: boot-installer.xml:2710
#, no-c-format
msgid "Booting from Floppies"
msgstr "Indítás flopikról"

#. Tag: para
#: boot-installer.xml:958
#: boot-installer.xml:2575
#, no-c-format
msgid "You will have already downloaded the floppy images you needed and created floppies from the images in <xref linkend=\"create-floppy\"/>."
msgstr "Itt szükség lesz a már letöltött flopi-képekre és a képekből a <xref linkend=\"create-floppy\"/> részben létrehozott flopikra."

#. Tag: para
#: boot-installer.xml:965
#, no-c-format
msgid "To boot from the installer boot floppy, place it in the primary floppy drive, shut down the system as you normally would, then turn it back on."
msgstr "A telepítő flopi indításához, tedd az elsődleges flopi meghajtóba, állítsd le a rendszert, ahogy egyébként tennéd és indítsd újra a gépet."

#. Tag: para
#: boot-installer.xml:971
#, no-c-format
msgid "For installing from an LS-120 drive (ATAPI version) with a set of floppies, you need to specify the virtual location for the floppy device. This is done with the <emphasis>root=</emphasis> boot argument, giving the device that the ide-floppy driver maps the device to. For example, if your LS-120 drive is connected as the first IDE device (master) on the second cable, you enter <userinput>install root=/dev/hdc</userinput> at the boot prompt."
msgstr "Egy LS-120 meghajtóról (ATAPI változat) telepítéshez egy flopi-készlettel, meg kell adni a flopi eszköz virtuális helyét. Ez a <emphasis>root=</emphasis> indító argumentummal tehető, megadva az eszközt, melyre az ide-floppy meghajtó helyezze. Például, ha az LS-120 meghajtó az 1. IDE eszköz (mester) a második kábelen, írd be ezt: <userinput>install root=/dev/hdc</userinput> az indító jelnél."

#. Tag: para
#: boot-installer.xml:981
#, no-c-format
msgid "Note that on some machines, <keycombo><keycap>Control</keycap> <keycap>Alt</keycap> <keycap>Delete</keycap></keycombo> does not properly reset the machine, so a <quote>hard</quote> reboot is recommended. If you are installing from an existing operating system (e.g., from a DOS box) you don't have a choice. Otherwise, please do a hard reboot when booting."
msgstr "Egyes gépeken a <keycombo><keycap>Control</keycap> <keycap>Alt</keycap> <keycap>Delete</keycap></keycombo> nem indítja újra helyesen a gépet, így egy <quote>hideg</quote> újraindítás ajánlott. Ha egy létező rendszerről telepítesz (például DOS alól), nincs választásod. Általában, ha lehet, végezz hidegindítást."

#. Tag: para
#: boot-installer.xml:990
#, no-c-format
msgid "The floppy disk will be accessed, and you should then see a screen that introduces the boot floppy and ends with the <prompt>boot:</prompt> prompt."
msgstr "A flopi lemez elindul és ekkor látnod kell egy képernyőt, mely bemutatja az indító flopit és egy <prompt>boot:</prompt> jellel zárul."

#. Tag: para
#: boot-installer.xml:996
#, no-c-format
msgid "Once you press &enterkey;, you should see the message <computeroutput>Loading...</computeroutput>, followed by <computeroutput>Uncompressing Linux...</computeroutput>, and then a screenfull or so of information about the hardware in your system. More information on this phase of the boot process can be found below in <xref linkend=\"kernel-msgs\"/>."
msgstr "Az &enterkey; lenyomásakor a <computeroutput>Loading...</computeroutput> üzenetnek kell jönnie, ezt követi ez: <computeroutput>Uncompressing Linux...</computeroutput>, majd sok-sok adat a gépben lévő hardverről. A telepítő folyamat e szakaszáról több adat az alábbi: <xref linkend=\"kernel-msgs\"/> részben található."

#. Tag: para
#: boot-installer.xml:1005
#, no-c-format
msgid "After booting from the boot floppy, the root floppy is requested. Insert the root floppy and press &enterkey;, and the contents are loaded into memory. The installer program <command>debian-installer</command> is automatically launched."
msgstr "Az indító flopi után az a root flopit kéri. Tedd be a root flopit és üsd le az &enterkey;-t, ekkor tartalma a memóriába olvasásra kerül. A <command>debian-installer</command> telepítő program elindul."

#. Tag: para
#: boot-installer.xml:1039
#, no-c-format
msgid "There are various ways to do a TFTP boot on i386."
msgstr "i386 gépen több mód van a TFTP indításra."

#. Tag: title
#: boot-installer.xml:1045
#, no-c-format
msgid "NIC or Motherboard that support PXE"
msgstr "PXE-támogató hálózati kártya vagy alaplap"

#. Tag: para
#: boot-installer.xml:1046
#, no-c-format
msgid "It could be that your Network Interface Card or Motherboard provides PXE boot functionality. This is a <trademark class=\"trade\">Intel</trademark> re-implementation of TFTP boot. If so, you may be able to configure your BIOS to boot from the network."
msgstr "Lehet, hogy a hálózati csatoló kártya vagy alaplap PXE indítást is támogat. Ez a TFTP indítás egy <trademark class=\"trade\">Intel</trademark> megvalósítása. Ha így van, lehetőség van a BIOS hálózati indításra állítására."

#. Tag: title
#: boot-installer.xml:1057
#, no-c-format
msgid "NIC with Network BootROM"
msgstr "NIC hálózati indító ROM-mal"

#. Tag: para
#: boot-installer.xml:1058
#, no-c-format
msgid "It could be that your Network Interface Card provides TFTP boot functionality."
msgstr "Lehet, hogy hálózati csatoló kártyád TFTP indítást kínál."

#. Tag: para
#: boot-installer.xml:1063
#, no-c-format
msgid "Let us (<email>&email-debian-boot-list;</email>) know how did you manage it. Please refer to this document."
msgstr "Tudasd velünk (<email>&email-debian-boot-list;</email>) hogyan kezelted. Hivatkozz e dokumentumra."

#. Tag: title
#: boot-installer.xml:1071
#, no-c-format
msgid "Etherboot"
msgstr "Etherboot"

#. Tag: para
#: boot-installer.xml:1072
#, no-c-format
msgid "The <ulink url=\"http://www.etherboot.org\">etherboot project</ulink> provides bootdiskettes and even bootroms that do a TFTPboot."
msgstr "Az <ulink url=\"http://www.etherboot.org\">etherboot project</ulink> TFTP indítást adó indító lemezeket és indító romokat ad."

#. Tag: title
#: boot-installer.xml:1081
#, no-c-format
msgid "The Boot Prompt"
msgstr "Az indító jel"

#. Tag: para
#: boot-installer.xml:1082
#, no-c-format
msgid ""
"When the installer boots, you should be presented with a friendly graphical screen showing the Debian logo and the boot prompt: <informalexample><screen>\n"
"Press F1 for help, or ENTER to boot:\n"
"</screen></informalexample> At the boot prompt you can either just press &enterkey; to boot the installer with default options or enter a specific boot method and, optionally, boot parameters."
msgstr ""
"A telepítő indulásakor egy barátságos grafikus képernyőt látsz a Debian logóval és az indító jellel: <informalexample><screen>\n"
"Press F1 for help, or ENTER to boot:\n"
"</screen></informalexample> Az indító jelnél leütheted az &enterkey; billentyűt a telepítő alap lehetőségeivel indításhoz vagy beírhatsz egy adott indító módot és, tetszőlegesen, indító paramétereket."

#. Tag: para
#: boot-installer.xml:1094
#, no-c-format
msgid "Information on available boot methods and on boot parameters which might be useful can be found by pressing <keycap>F2</keycap> through <keycap>F8</keycap>. If you add any parameters to the boot command line, be sure to type the boot method (the default is <userinput>install</userinput>) and a space before the first parameter (e.g., <userinput>install fb=false</userinput>)."
msgstr "Az elérhető indító módok és paraméterek, melyek hasznosak lehetnek az <keycap>F2</keycap> és <keycap>F8</keycap> közti billentyűk leütésével érhetők el. Ha paramétert adsz az indító parancs sorhoz, írd be az indító módot (az alap az <userinput>install</userinput>) és egy szóközt az 1. paraméter előtt (például <userinput>install fb=false</userinput>)."

#. Tag: para
#: boot-installer.xml:1103
#, no-c-format
msgid "If you are installing the system via a remote management device that provides a text interface to the VGA console, you may not be able to see the initial graphical splash screen upon booting the installer; you may even not see the boot prompt. Examples of these devices include the text console of Compaq's <quote>integrated Lights Out</quote> (iLO) and HP's <quote>Integrated Remote Assistant</quote> (IRA). You can blindly press F1<footnote> <para> In some cases these devices will require special escape sequences to enact this keypress, for example the IRA uses <keycombo> <keycap>Ctrl</keycap> <keycap>F</keycap> </keycombo>,&nbsp;<keycap>1</keycap>. </para> </footnote> to bypass this screen and view the help text. Once you are past the splash screen and at the help text your keystrokes will be echoed at the prompt as expected. To prevent the installer from using the framebuffer for the rest of the installation, you will also want to add <userinput>fb=false</userinput> to the boot prompt, as described in the help text."
msgstr "Ha a rendszert távoli kezelő eszközön át telepíted, mely szöveges felületet ad a VGA konzolhoz, talán nem látod a kezdő grafikus üdvözlő képernyőt a telepítő indításakor és az indító jelet. Ezek között van a Compaq <quote>integrated Lights Out</quote> (iLO) és HP <quote>Integrated Remote Assistant</quote> (IRA). Vakon nyomd meg az F1 billentyűt <footnote> <para> Néha ehhez különleges escape sor kell, például IRA esetén <keycombo> <keycap>Ctrl</keycap> <keycap>F</keycap> </keycombo>,&nbsp;<keycap>1</keycap>. </para> </footnote> a képernyő átugrásával a súgóra lépéshez. Ezután a leütött billentyűk már a várakozásnak megfelelően megjelennek a beviteli jelnél. A framebuffer tiltásához a telepítéskor az <userinput>fb=false</userinput> hozzáadása kell az indító jelnél, ahogy azt a súgó is írja."

#. Tag: title
#: boot-installer.xml:1178
#, no-c-format
msgid "CD Contents"
msgstr ""

#. Tag: para
#: boot-installer.xml:1180
#, no-c-format
msgid "There are three basic variations of Debian Install CDs. The <emphasis>Business Card</emphasis> CD has a minimal installation that will fit on the small form factor CD media. It requires a network connection in order to install the rest of the base installation and make a usable system. The <emphasis>Network Install</emphasis> CD has all of the packages for a base install but requires a network connection to a Debian mirror site in order to install the extra packages one would want for a complete system . The set of Debian CDs can install a complete system from the wide range of packages without needing access to the network."
msgstr ""

#. Tag: para
#: boot-installer.xml:1196
#, no-c-format
msgid "The IA-64 architecture uses the next generation Extensible Firmware Interface (EFI) from Intel. Unlike the traditional x86 BIOS which knows little about the boot device other than the partition table and Master Boot Record (MBR), EFI can read and write files from FAT16 or FAT32 formatted disk partitions. This simplifies the often arcane process of starting a system. The system boot loader and the EFI firmware that supports it have a full filesystem to store the files necessary for booting the machine. This means that the system disk on an IA-64 system has an additional disk partition dedicated to EFI instead of the simple MBR or boot block on more conventional systems."
msgstr ""

#. Tag: para
#: boot-installer.xml:1212
#, no-c-format
msgid "The Debian Installer CD contains a small EFI partition where the <command>ELILO</command> bootloader, its configuration file, the installer's kernel, and initial filesystem (initrd) are located. The running system also contains an EFI partition where the necessary files for booting the system reside. These files are readable from the EFI Shell as described below."
msgstr ""

#. Tag: para
#: boot-installer.xml:1221
#, no-c-format
msgid "Most of the details of how <command>ELILO</command> actually loads and starts a system are transparent to the system installer. However, the installer must set up an EFI partition prior to installing the base system. Otherwise, the installation of <command>ELILO</command> will fail, rendering the system un-bootable. The EFI partition is allocated and formatted in the partitioning step of the installation prior to loading any packages on the system disk. The partitioning task also verifies that a suitable EFI partition is present before allowing the installation to proceed."
msgstr ""

#. Tag: para
#: boot-installer.xml:1233
#, no-c-format
msgid "The EFI Boot Manager is presented as the last step of the firmware initialization. It displays a menu list from which the user can select an option. Depending on the model of system and what other software has been loaded on the system, this menu may be different from one system to another. There should be at least two menu items displayed, <command>Boot Option Maintenance Menu</command> and <command>EFI Shell (Built-in)</command>. Using the first option is preferred, however, if that option is not available or the CD for some reason does not boot with it, use the second option."
msgstr ""

#. Tag: title
#: boot-installer.xml:1252
#, no-c-format
msgid "IMPORTANT"
msgstr ""

#. Tag: para
#: boot-installer.xml:1253
#, no-c-format
msgid "The EFI Boot Manager will select a default boot action, typically the first menu choice, within a pre-set number of seconds. This is indicated by a countdown at the bottom of the screen. Once the timer expires and the systems starts the default action, you may have to reboot the machine in order to continue the installation. If the default action is the EFI Shell, you can return to the Boot Manager by running <command>exit</command> at the shell prompt."
msgstr ""

#. Tag: title
#: boot-installer.xml:1265
#, no-c-format
msgid "Option 1: Booting from the Boot Option Maintenance Menu"
msgstr ""

#. Tag: para
#: boot-installer.xml:1272
#, no-c-format
msgid "Insert the CD in the DVD/CD drive and reboot the machine. The firmware will display the EFI Boot Manager page and menu after it completes its system initialization."
msgstr ""

#. Tag: para
#: boot-installer.xml:1278
#, no-c-format
msgid "Select <command>Boot Maintenance Menu</command> from the menu with the arrow keys and press <command>ENTER</command>. This will display a new menu."
msgstr ""

#. Tag: para
#: boot-installer.xml:1284
#, no-c-format
msgid "Select <command>Boot From a File</command> from the menu with the arrow keys and press <command>ENTER</command>. This will display a list of devices probed by the firmware. You should see two menu lines containing either the label <command>Debian Inst [Acpi ...</command> or <command>Removable Media Boot</command>. If you examine the rest of the menu line, you will notice that the device and controller information should be the same."
msgstr ""

#. Tag: para
#: boot-installer.xml:1295
#, no-c-format
msgid "You can choose either of the entries that refer to the CD/DVD drive. Select your choice with the arrow keys and press <command>ENTER</command>. If you choose <command>Removable Media Boot</command> the machine will immediately start the boot load sequence. If you choose <command>Debian Inst [Acpi ...</command> instead, it will display a directory listing of the bootable portion of the CD, requiring you to proceed to the next (additional) step."
msgstr ""

#. Tag: para
#: boot-installer.xml:1306
#, no-c-format
msgid "You will only need this step if you chose <command>Debian Inst [Acpi ...</command>. The directory listing will also show <command>[Treat like Removable Media Boot]</command> on the next to the last line. Select this line with the arrow keys and press <command>ENTER</command>. This will start the boot load sequence."
msgstr ""

#. Tag: para
#: boot-installer.xml:1318
#, no-c-format
msgid "These steps start the Debian boot loader which will display a menu page for you to select a boot kernel and options. Proceed to selecting the boot kernel and options."
msgstr ""

#. Tag: title
#: boot-installer.xml:1328
#, no-c-format
msgid "Option 2: Booting from the EFI Shell"
msgstr ""

#. Tag: para
#: boot-installer.xml:1329
#, no-c-format
msgid "If, for some reason, option 1 is not successful, reboot the machine and when the EFI Boot Manager screen appears there should be one option called <command>EFI Shell [Built-in]</command>. Boot the Debian Installer CD with the following steps:"
msgstr ""

#. Tag: para
#: boot-installer.xml:1340
#, no-c-format
msgid "Insert the CD in the DVD/CD drive and reboot the machine. The firmware will display the EFI Boot Manager page and menu after it completes system initialization."
msgstr ""

#. Tag: para
#: boot-installer.xml:1346
#, no-c-format
msgid "Select <command>EFI Shell</command> from the menu with the arrow keys and press <command>ENTER</command>. The EFI Shell will scan all of the bootable devices and display them to the console before displaying its command prompt. The recognized bootable partitions on devices will show a device name of <filename>fs<replaceable>n</replaceable>:</filename>. All other recognized partitions will be named <filename>blk<replaceable>n</replaceable>:</filename>. If you inserted the CD just before entering the shell, this may take a few extra seconds as it initializes the CD drive."
msgstr ""

#. Tag: para
#: boot-installer.xml:1360
#, no-c-format
msgid "Examine the output from the shell looking for the CDROM drive. It is most likely the <filename>fs0:</filename> device although other devices with bootable partitions will also show up as <filename>fs<replaceable>n</replaceable></filename>."
msgstr ""

#. Tag: para
#: boot-installer.xml:1367
#, no-c-format
msgid "Enter <command>fs<replaceable>n</replaceable>:</command> and press <command>ENTER</command> to select that device where <replaceable>n</replaceable> is the partition number for the CDROM. The shell will now display the partition number as its prompt."
msgstr ""

#. Tag: para
#: boot-installer.xml:1374
#, no-c-format
msgid "Enter <command>elilo</command> and press <command>ENTER</command>. This will start the boot load sequence."
msgstr ""

#. Tag: para
#: boot-installer.xml:1381
#, no-c-format
msgid "As with option 1, these steps start the Debian boot loader which will display a menu page for you to select a boot kernel and options. You can also enter the shorter <command>fs<replaceable>n</replaceable>:elilo</command> command at the shell prompt. Proceed to selecting the boot kernel and options."
msgstr ""

#. Tag: title
#: boot-installer.xml:1395
#, no-c-format
msgid "Installing using a Serial Console"
msgstr ""

#. Tag: para
#: boot-installer.xml:1397
#, no-c-format
msgid "You may choose to perform an install using a monitor and keyboard or using a serial connection. To use a monitor/keyboard setup, select an option containing the string [VGA console]. To install over a serial connection, choose an option containing the string [<replaceable>BAUD</replaceable> baud serial console], where <replaceable>BAUD</replaceable> is the speed of your serial console. Menu items for the most typical baud rate settings on the ttyS0 device are preconfigured."
msgstr ""

#. Tag: para
#: boot-installer.xml:1408
#, no-c-format
msgid "In most circumstances, you will want the installer to use the same baud rate as your connection to the EFI console. If you aren't sure what this setting is, you can obtain it using the command <command>baud</command> at the EFI shell."
msgstr ""

#. Tag: para
#: boot-installer.xml:1415
#, no-c-format
msgid "If there is not an option available that is configured for the serial device or baud rate you would like to use, you may override the console setting for one of the existing menu options. For example, to use a 57600 baud console over the ttyS1 device, enter <command>console=ttyS1,57600n8</command> into the <classname>Boot:</classname> text window."
msgstr ""

#. Tag: para
#: boot-installer.xml:1426
#, no-c-format
msgid "Most IA-64 boxes ship with a default console setting of 9600 baud. This setting is rather slow, and the normal installation process will take a significant time to draw each screen. You should consider either increasing the baud rate used for performing the installation, or performing a Text Mode installation. See the <classname>Params</classname> help menu for instructions on starting the installer in Text Mode."
msgstr ""

#. Tag: para
#: boot-installer.xml:1435
#, no-c-format
msgid "If you select the wrong console type, you will be able to select the kernel and enter parameters but both the display and your input will go dead as soon as the kernel starts, requiring you to reboot before you can begin the installation."
msgstr ""

#. Tag: title
#: boot-installer.xml:1444
#, no-c-format
msgid "Selecting the Boot Kernel and Options"
msgstr ""

#. Tag: para
#: boot-installer.xml:1446
#, no-c-format
msgid "The boot loader will display a form with a menu list and a text window with a <classname>Boot:</classname> prompt. The arrow keys select an item from the menu and any text typed at the keyboard will appear in the text window. There are also help screens which can be displayed by pressing the appropriate function key. The <classname>General</classname> help screen explains the menu choices and the <classname>Params</classname> screen explains the common command line options."
msgstr ""

#. Tag: para
#: boot-installer.xml:1458
#, no-c-format
msgid "Consult the <classname>General</classname> help screen for the description of the kernels and install modes most appropriate for your installation. You should also consult <xref linkend=\"boot-parms\"/> below for any additional parameters that you may want to set in the <classname>Boot:</classname> text window. The kernel version you choose selects the kernel version that will be used for both the installation process and the installed system. If you encounter kernel problems with the installation, you may also have those same problems with the system you install. The following two steps will select and start the install:"
msgstr ""

#. Tag: para
#: boot-installer.xml:1476
#, no-c-format
msgid "Select the kernel version and installation mode most appropriate to your needs with the arrow keys."
msgstr ""

#. Tag: para
#: boot-installer.xml:1481
#, no-c-format
msgid "Enter any boot parameters by typing at the keyboard. The text will be displayed directly in the text window. This is where kernel parameters (such as serial console settings) are specified."
msgstr ""

#. Tag: para
#: boot-installer.xml:1488
#, no-c-format
msgid "Press <command>ENTER</command>. This will load and start the kernel. The kernel will display its usual initialization messages followed by the first screen of the Debian Installer."
msgstr ""

#. Tag: para
#: boot-installer.xml:1497
#: boot-installer.xml:1633
#, no-c-format
msgid "Proceed to the next chapter to continue the installation where you will set up the language locale, network, and disk partitions."
msgstr ""

#. Tag: para
#: boot-installer.xml:1508
#, no-c-format
msgid "Booting an IA-64 system from the network is similar to a CD boot. The only difference is how the installation kernel is loaded. The EFI Boot Manager can load and start programs from a server on the network. Once the installation kernel is loaded and starts, the system install will proceed through the same steps as the CD install with the exception that the packages of the base install will be loaded from the network rather than the CD drive."
msgstr ""

#. Tag: para
#: boot-installer.xml:1542
#, no-c-format
msgid "Network booting an IA-64 system requires two architecture-specific actions. On the boot server, DHCP and TFTP must be configured to deliver <command>elilo</command>. On the client a new boot option must be defined in the EFI boot manager to enable loading over a network."
msgstr ""

#. Tag: title
#: boot-installer.xml:1553
#, no-c-format
msgid "Configuring the Server"
msgstr ""

#. Tag: para
#: boot-installer.xml:1554
#, no-c-format
msgid ""
"A suitable TFTP entry for network booting an IA-64 system looks something like this: <informalexample><screen>\n"
"host mcmuffin {\n"
"        hardware ethernet 00:30:6e:1e:0e:83;\n"
"        fixed-address 10.0.0.21;\n"
"        filename \"debian-installer/ia64/elilo.efi\";\n"
"}\n"
"</screen></informalexample> Note that the goal is to get <command>elilo.efi</command> running on the client."
msgstr ""

#. Tag: para
#: boot-installer.xml:1564
#, no-c-format
msgid "Extract the <filename>netboot.tar.gz</filename> file into the directory used as the root for your tftp server. Typical tftp root directories include <filename>/var/lib/tftp</filename> and <filename>/tftpboot</filename>. This will create a <filename>debian-installer</filename> directory tree containing the boot files for an IA-64 system."
msgstr ""

#. Tag: screen
#: boot-installer.xml:1574
#, no-c-format
msgid ""
"# cd /var/lib/tftp\n"
"# tar xvfz /home/user/netboot.tar.gz\n"
"./\n"
"./debian-installer/\n"
"./debian-installer/ia64/\n"
"[...]"
msgstr ""

#. Tag: para
#: boot-installer.xml:1574
#, no-c-format
msgid "The <filename>netboot.tar.gz</filename> contains an <filename>elilo.conf</filename> file that should work for most configurations. However, should you need to make changes to this file, you can find it in the <filename>debian-installer/ia64/</filename> directory. It is possible to have different config files for different clients by naming them using the client's IP address in hex with the suffix <filename>.conf</filename> instead of <filename>elilo.conf</filename>. See documentation provided in the <classname>elilo</classname> package for details."
msgstr ""

#. Tag: title
#: boot-installer.xml:1591
#, no-c-format
msgid "Configuring the Client"
msgstr ""

#. Tag: para
#: boot-installer.xml:1592
#, no-c-format
msgid "To configure the client to support TFTP booting, start by booting to EFI and entering the <guimenu>Boot Option Maintenance Menu</guimenu>. <itemizedlist> <listitem><para> Add a boot option. </para></listitem> <listitem><para> You should see one or more lines with the text <guimenuitem>Load File [Acpi()/.../Mac()]</guimenuitem>. If more than one of these entries exist, choose the one containing the MAC address of the interface from which you'll be booting. Use the arrow keys to highlight your choice, then press enter. </para></listitem> <listitem><para> Name the entry <userinput>Netboot</userinput> or something similar, save, and exit back to the boot options menu. </para></listitem> </itemizedlist> You should see the new boot option you just created, and selecting it should initiate a DHCP query, leading to a TFTP load of <filename>elilo.efi</filename> from the server."
msgstr ""

#. Tag: para
#: boot-installer.xml:1624
#, no-c-format
msgid "The boot loader will display its prompt after it has downloaded and processed its configuration file. At this point, the installation proceeds with the same steps as a CD install. Select a boot option as in above and when the kernel has completed installing itself from the network, it will start the Debian Installer."
msgstr ""

#. Tag: title
#: boot-installer.xml:1646
#, no-c-format
msgid "Choosing an Installation Method"
msgstr "Telepítő mód választás"

#. Tag: para
#: boot-installer.xml:1648
#, no-c-format
msgid "Some &arch-title; subarchs have the option of booting using either a 2.4.x or 2.2.x linux kernel. When such a choice exists, try the 2.4.x linux kernel. The installer should also require less memory when using a 2.4.x linux kernel as 2.2.x support requires a fixed-sized ramdisk and 2.4.x uses tmpfs."
msgstr ""

#. Tag: para
#: boot-installer.xml:1656
#, no-c-format
msgid "If you are using a 2.2.x linux kernel, then you need to use the &ramdisksize; kernel parameter."
msgstr "2.2.x linux kernel esetén a &ramdisksize; beállítandó."

#. Tag: para
#: boot-installer.xml:1661
#, no-c-format
msgid "Make sure <userinput>root=/dev/ram</userinput> is one of your kernel parameters."
msgstr ""

#. Tag: para
#: boot-installer.xml:1666
#, no-c-format
msgid "If you're having trouble, check <ulink url=\"&url-m68k-cts-faq;\">cts's &arch-title; debian-installer FAQ</ulink>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1683
#, no-c-format
msgid "Amiga"
msgstr "Amiga"

#. Tag: para
#: boot-installer.xml:1684
#, no-c-format
msgid "The only method of installation available to amiga is the hard drive (see <xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words the cdrom is not bootable.</emphasis>"
msgstr ""

#. Tag: para
#: boot-installer.xml:1690
#, no-c-format
msgid "Amiga does not currently work with bogl, so if you are seeing bogl errors, you need to include the boot parameter <userinput>fb=false</userinput>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1699
#, no-c-format
msgid "Atari"
msgstr ""

#. Tag: para
#: boot-installer.xml:1700
#, no-c-format
msgid "The installer for atari may be started from either the hard drive (see <xref linkend=\"m68k-boot-hd\"/>) or from floppies (see <xref linkend=\"boot-from-floppies\"/>). <emphasis>In other words the cdrom is not bootable.</emphasis>"
msgstr ""

#. Tag: para
#: boot-installer.xml:1707
#, no-c-format
msgid "Atari does not currently work with bogl, so if you are seeing bogl errors, you need to include the boot parameter <userinput>fb=false</userinput>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1716
#, no-c-format
msgid "BVME6000"
msgstr ""

#. Tag: para
#: boot-installer.xml:1717
#, no-c-format
msgid "The installer for BVME6000 may be started from a cdrom (see <xref linkend=\"m68k-boot-cdrom\"/>), floppies (see <xref linkend=\"boot-from-floppies\"/>), or the net (see <xref linkend=\"boot-tftp\"/>)."
msgstr ""

#. Tag: title
#: boot-installer.xml:1727
#, no-c-format
msgid "Macintosh"
msgstr ""

#. Tag: para
#: boot-installer.xml:1728
#, no-c-format
msgid "The only method of installation available to mac is from the hard drive (see <xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words the cdrom is not bootable.</emphasis> Macs do not have a working 2.4.x kernel."
msgstr ""

#. Tag: para
#: boot-installer.xml:1735
#, no-c-format
msgid "If your hardware uses a 53c9x-based scsi bus, then you may need to include the kernel parameter <userinput>mac53c9x=1,0</userinput>. Hardware with two such scsi buses, such as the Quadra 950, will need <userinput>mac53c9x=2,0</userinput> instead. Alternatively, the parameter can be specified as <userinput>mac53c9x=-1,0</userinput> which will leave autodetection on, but which will disable SCSI disconnects. Note that specifying this parameter is only necessary if you have more than one hard disk; otherwise, the system will run faster if you do not specify it."
msgstr ""

#. Tag: title
#: boot-installer.xml:1750
#, no-c-format
msgid "MVME147 and MVME16x"
msgstr ""

#. Tag: para
#: boot-installer.xml:1751
#, no-c-format
msgid "The installer for MVME147 and MVME16x may be started from either floppies (see <xref linkend=\"boot-from-floppies\"/>) or the net (see <xref linkend=\"boot-tftp\"/>). <emphasis>In other words the cdrom is not bootable.</emphasis>"
msgstr ""

#. Tag: title
#: boot-installer.xml:1761
#, no-c-format
msgid "Q40/Q60"
msgstr ""

#. Tag: para
#: boot-installer.xml:1762
#, no-c-format
msgid "The only method of installation available to Q40/Q60 is from the hard drive (see <xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words the cdrom is not bootable.</emphasis>"
msgstr ""

#. Tag: title
#: boot-installer.xml:1773
#, no-c-format
msgid "Booting from a Hard Disk"
msgstr "Indítás egy merevlemezről"

#. Tag: para
#: boot-installer.xml:1779
#: boot-installer.xml:2383
#, no-c-format
msgid "Booting from an existing operating system is often a convenient option; for some systems it is the only supported method of installation."
msgstr ""

#. Tag: para
#: boot-installer.xml:1785
#: boot-installer.xml:2389
#, no-c-format
msgid "To boot the installer from hard disk, you will have already completed downloading and placing the needed files in <xref linkend=\"boot-drive-files\"/>."
msgstr "A telepítő merevlemezről indításához először le kell tölteni és elhelyezni a <xref linkend=\"boot-drive-files\"/> részben írt fájlokat."

#. Tag: para
#: boot-installer.xml:1794
#, no-c-format
msgid "At least six different ramdisks may be used to boot from the hard drive, three different types each with and without support for a 2.2.x linux kernel (see <ulink url=\"&disturl;/main/installer-&architecture;/current/images/MANIFEST\">MANIFEST</ulink> for details)."
msgstr ""

#. Tag: para
#: boot-installer.xml:1802
#, no-c-format
msgid "The three different types of ramdisks are <filename>cdrom</filename>, <filename>hd-media</filename>, and <filename>nativehd</filename>. These ramdisks differ only in their source for installation packages. The <filename>cdrom</filename> ramdisk uses a cdrom to get debian-installer packages. The <filename>hd-media</filename> ramdisk uses an iso image file of a cdrom currently residing on a hard disk. Finally, the <filename>nativehd</filename> ramdisk uses the net to install packages."
msgstr ""

#. Tag: title
#: boot-installer.xml:1823
#, no-c-format
msgid "Booting from AmigaOS"
msgstr "Indítás AmigaOS alól"

#. Tag: para
#: boot-installer.xml:1824
#, no-c-format
msgid "In the <command>Workbench</command>, start the Linux installation process by double-clicking on the <guiicon>StartInstall</guiicon> icon in the <filename>debian</filename> directory."
msgstr ""

#. Tag: para
#: boot-installer.xml:1830
#, no-c-format
msgid "You may have to press the &enterkey; key twice after the Amiga installer program has output some debugging information into a window. After this, the screen will go grey, there will be a few seconds' delay. Next, a black screen with white text should come up, displaying all kinds of kernel debugging information. These messages may scroll by too fast for you to read, but that's OK. After a couple of seconds, the installation program should start automatically, so you can continue down at <xref linkend=\"d-i-intro\"/>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1845
#, no-c-format
msgid "Booting from Atari TOS"
msgstr "Indítás Atari TOS alól"

#. Tag: para
#: boot-installer.xml:1846
#, no-c-format
msgid "At the GEM desktop, start the Linux installation process by double-clicking on the <guiicon>bootstra.prg</guiicon> icon in the <filename>debian</filename> directory and clicking <guibutton>Ok</guibutton> at the program options dialog box."
msgstr ""

#. Tag: para
#: boot-installer.xml:1853
#, no-c-format
msgid "You may have to press the &enterkey; key after the Atari bootstrap program has output some debugging information into a window. After this, the screen will go grey, there will be a few seconds' delay. Next, a black screen with white text should come up, displaying all kinds of kernel debugging information. These messages may scroll by too fast for you to read, but that's OK. After a couple of seconds, the installation program should start automatically, so you can continue below at <xref linkend=\"d-i-intro\"/>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1868
#, no-c-format
msgid "Booting from MacOS"
msgstr "Indítás MacOS alól"

#. Tag: para
#: boot-installer.xml:1869
#, no-c-format
msgid "You must retain the original Mac system and boot from it. It is <emphasis>essential</emphasis> that, when booting MacOS in preparation for booting the Penguin linux loader, you hold the <keycap>shift</keycap> key down to prevent extensions from loading. If you don't use MacOS except for loading linux, you can accomplish the same thing by removing all extensions and control panels from the Mac's System Folder. Otherwise extensions may be left running and cause random problems with the running linux kernel."
msgstr ""

#. Tag: para
#: boot-installer.xml:1880
#, no-c-format
msgid "Macs require the <command>Penguin</command> bootloader. If you do not have the tools to handle a <command>Stuffit</command> archive, &penguin19.hfs; is an hfs disk image with <command>Penguin</command> unpacked. <xref linkend=\"create-floppy\"/> describes how to copy this image to a floppy."
msgstr ""

#. Tag: para
#: boot-installer.xml:1889
#, no-c-format
msgid "At the MacOS desktop, start the Linux installation process by double-clicking on the <guiicon>Penguin Prefs</guiicon> icon in the <filename>Penguin</filename> directory. The <command>Penguin</command> booter will start up. Go to the <guimenuitem>Settings</guimenuitem> item in the <guimenu>File</guimenu> menu, click the <guilabel>Kernel</guilabel> tab. Select the kernel (<filename>vmlinuz</filename>) and ramdisk (<filename>initrd.gz</filename>) images in the <filename>install</filename> directory by clicking on the corresponding buttons in the upper right corner, and navigating the file select dialogs to locate the files."
msgstr ""

#. Tag: para
#: boot-installer.xml:1904
#, no-c-format
msgid "To set the boot parameters in Penguin, choose <guimenu>File</guimenu> -&gt; <guimenuitem>Settings...</guimenuitem>, then switch to the <guilabel>Options</guilabel> tab. Boot parameters may be typed in to the text entry area. If you will always want to use these settings, select <guimenu>File</guimenu> -&gt; <guimenuitem>Save Settings as Default</guimenuitem>."
msgstr ""

#. Tag: para
#: boot-installer.xml:1913
#, no-c-format
msgid "Close the <guilabel>Settings</guilabel> dialog, save the settings and start the bootstrap using the <guimenuitem>Boot Now</guimenuitem> item in the <guimenu>File</guimenu> menu."
msgstr ""

#. Tag: para
#: boot-installer.xml:1920
#, no-c-format
msgid "The <command>Penguin</command> booter will output some debugging information into a window. After this, the screen will go grey, there will be a few seconds' delay. Next, a black screen with white text should come up, displaying all kinds of kernel debugging information. These messages may scroll by too fast for you to read, but that's OK. After a couple of seconds, the installation program should start automatically, so you can continue below at <xref linkend=\"d-i-intro\"/>."
msgstr ""

#. Tag: title
#: boot-installer.xml:1935
#, no-c-format
msgid "Booting from Q40/Q60"
msgstr "Indítás Q40/Q60 alól"

#. Tag: para
#: boot-installer.xml:1937
#, no-c-format
msgid "FIXME"
msgstr ""

#. Tag: para
#: boot-installer.xml:1941
#, no-c-format
msgid "The installation program should start automatically, so you can continue below at <xref linkend=\"d-i-intro\"/>."
msgstr ""

#. Tag: para
#: boot-installer.xml:1953
#, no-c-format
msgid "Currently, the only &arch-title; subarchitecture that supports CD-ROM booting is the BVME6000."
msgstr ""

#. Tag: para
#: boot-installer.xml:2025
#, no-c-format
msgid "After booting the VMEbus systems you will be presented with the LILO <prompt>Boot:</prompt> prompt. At that prompt enter one of the following to boot Linux and begin installation proper of the Debian software using vt102 terminal emulation:"
msgstr ""

#. Tag: para
#: boot-installer.xml:2036
#, no-c-format
msgid "type <screen>i6000 &enterkey;</screen> to install a BVME4000/6000"
msgstr ""

#. Tag: para
#: boot-installer.xml:2041
#, no-c-format
msgid "type <screen>i162 &enterkey;</screen> to install an MVME162"
msgstr ""

#. Tag: para
#: boot-installer.xml:2046
#, no-c-format
msgid "type <screen>i167 &enterkey;</screen> to install an MVME166/167"
msgstr ""

#. Tag: para
#: boot-installer.xml:2053
#, no-c-format
msgid "You may additionally append the string <screen>TERM=vt100</screen> to use vt100 terminal emulation, e.g., <screen>i6000 TERM=vt100 &enterkey;</screen>."
msgstr ""

#. Tag: para
#: boot-installer.xml:2065
#, no-c-format
msgid "For most &arch-title; architectures, booting from a local filesystem is the recommended method."
msgstr ""

#. Tag: para
#: boot-installer.xml:2070
#, no-c-format
msgid "Booting from the boot floppy is supported only for Atari and VME (with a SCSI floppy drive on VME) at this time."
msgstr ""

#. Tag: title
#: boot-installer.xml:2086
#: boot-installer.xml:2133
#, no-c-format
msgid "SGI TFTP Booting"
msgstr ""

#. Tag: para
#: boot-installer.xml:2087
#, no-c-format
msgid ""
"After entering the command monitor use <informalexample><screen>\n"
"bootp():\n"
"</screen></informalexample> on SGI machines to boot linux and to begin installation of the Debian Software. In order to make this work you may have to unset the <envar>netaddr</envar> environment variable. Type <informalexample><screen>\n"
"unsetenv netaddr\n"
"</screen></informalexample> in the command monitor to do this."
msgstr ""

#. Tag: title
#: boot-installer.xml:2106
#: boot-installer.xml:2155
#: boot-installer.xml:2210
#: boot-installer.xml:2249
#, no-c-format
msgid "Broadcom BCM91250A and BCM91480B TFTP Booting"
msgstr ""

#. Tag: para
#: boot-installer.xml:2107
#: boot-installer.xml:2211
#, no-c-format
msgid ""
"On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot loader via TFTP which will then load and start the Debian installer. In most cases, you will first obtain an IP address via DHCP but it is also possible to configure a static address. In order to use DHCP, you can enter the following command on the CFE prompt: <informalexample><screen>\n"
"ifconfig eth0 -auto\n"
"</screen></informalexample> Once you have obtained an IP address, you can load SiByl with the following command: <informalexample><screen>\n"
"boot 192.168.1.1:/boot/sibyl\n"
"</screen></informalexample> You need to substitute the IP address listed in this example with either the name or the IP address of your TFTP server. Once you issue this command, the installer will be loaded automatically."
msgstr ""

#. Tag: title
#: boot-installer.xml:2130
#: boot-installer.xml:2234
#: boot-installer.xml:2768
#, no-c-format
msgid "Boot Parameters"
msgstr "Indító paraméterek"

#. Tag: para
#: boot-installer.xml:2134
#, no-c-format
msgid "On SGI machines you can append boot parameters to the <command>bootp():</command> command in the command monitor."
msgstr ""

#. Tag: para
#: boot-installer.xml:2139
#, no-c-format
msgid ""
"Following the <command>bootp():</command> command you can give the path and name of the file to boot if you did not give an explicit name via your bootp/dhcp server. Example: <informalexample><screen>\n"
"bootp():/boot/tftpboot.img\n"
"</screen></informalexample> Further kernel parameters can be passed via <command>append</command>:"
msgstr ""

#. Tag: screen
#: boot-installer.xml:2149
#, no-c-format
msgid "bootp(): append=\"root=/dev/sda1\""
msgstr ""

#. Tag: para
#: boot-installer.xml:2156
#: boot-installer.xml:2250
#, no-c-format
msgid "You cannot pass any boot parameters directly from the CFE prompt. Instead, you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP server and add your parameters to the <replaceable>extra_args</replaceable> variable."
msgstr ""

#. Tag: title
#: boot-installer.xml:2175
#: boot-installer.xml:2237
#, no-c-format
msgid "Cobalt TFTP Booting"
msgstr ""

#. Tag: para
#: boot-installer.xml:2176
#, no-c-format
msgid "Strictly speaking, Cobalt does not use TFTP but NFS to boot. You need to install an NFS server and put the installer files in <filename>/nfsroot</filename>. When you boot your Cobalt, you have to press the left and the right cursor buttons at the same time and the machine will boot via the network from NFS. It will then display several options on the display. There are the following two installation methods:"
msgstr ""

#. Tag: para
#: boot-installer.xml:2186
#, no-c-format
msgid "Via SSH (default): In this case, the installer will configure the network via DHCP and start an SSH server. It will then display a random password and other login information (such as the IP address) on the Cobalt LCD. When you connect to the machine with an SSH client you can start with the installation."
msgstr ""

#. Tag: para
#: boot-installer.xml:2195
#, no-c-format
msgid "Via serial console: Using a null modem cable, you can connect to the serial port of your Cobalt machine (using 115200 bps) and perform the installation this way. This option is not available on Qube 2700 (Qube1) machines since they have no serial port."
msgstr ""

#. Tag: para
#: boot-installer.xml:2238
#, no-c-format
msgid "You cannot pass any boot parameters directly. Instead, you have to edit the <filename>/nfsroot/default.colo</filename> file on the NFS server and add your parameters to the <replaceable>args</replaceable> variable."
msgstr ""

#. Tag: title
#: boot-installer.xml:2266
#, no-c-format
msgid "s390 Limitations"
msgstr ""

#. Tag: para
#: boot-installer.xml:2267
#, no-c-format
msgid "In order to run the installation system a working network setup and ssh session is needed on S/390."
msgstr ""

#. Tag: para
#: boot-installer.xml:2272
#, no-c-format
msgid "The booting process starts with a network setup that prompts you for several network parameters. If the setup is successful, you will login to the system by starting an ssh session which will launch the standard installation system."
msgstr ""

#. Tag: title
#: boot-installer.xml:2283
#, no-c-format
msgid "s390 Boot Parameters"
msgstr "s390 indító paraméterek"

#. Tag: para
#: boot-installer.xml:2284
#, no-c-format
msgid "On S/390 you can append boot parameters in the parm file. This file can either be in ASCII or EBCDIC format. A sample parm file <filename>parmfile.debian</filename> is provided with the installation images."
msgstr ""

#. Tag: para
#: boot-installer.xml:2344
#, no-c-format
msgid "Currently, the only &arch-title; subarchitectures that support CD-ROM booting are PReP (though not all systems) and New World PowerMacs. On PowerMacs, hold the <keycap>c</keycap> key, or else the combination of <keycap>Command</keycap>, <keycap>Option</keycap>, <keycap>Shift</keycap>, and <keycap>Delete</keycap> keys together while booting to boot from the CD-ROM."
msgstr ""

#. Tag: para
#: boot-installer.xml:2353
#, no-c-format
msgid "OldWorld PowerMacs will not boot a Debian CD, because OldWorld computers relied on a Mac OS ROM CD boot driver to be present on the CD, and a free-software version of this driver is not available. All OldWorld systems have floppy drives, so use the floppy drive to launch the installer, and then point the installer to the CD for the needed files."
msgstr ""

#. Tag: para
#: boot-installer.xml:2362
#, no-c-format
msgid "If your system doesn't boot directly from CD-ROM, you can still use the CD-ROM to install the system. On NewWorlds, you can also use an OpenFirmware command to boot from the CD-ROM manually. Follow the instructions in <xref linkend=\"boot-newworld\"/> for booting from the hard disk, except use the path to <command>yaboot</command> on the CD at the OF prompt, such as"
msgstr ""

#. Tag: screen
#: boot-installer.xml:2371
#, no-c-format
msgid "0 &gt; boot cd:,\\install\\yaboot"
msgstr ""

#. Tag: title
#: boot-installer.xml:2377
#, no-c-format
msgid "Booting from Hard Disk"
msgstr "Indítás merevlemezről"

#. Tag: title
#: boot-installer.xml:2398
#, no-c-format
msgid "Booting CHRP from OpenFirmware"
msgstr "CHRP Indítása OpenFirmware alól"

#. Tag: emphasis
#: boot-installer.xml:2402
#, no-c-format
msgid "Not yet written."
msgstr ""

#. Tag: title
#: boot-installer.xml:2407
#, no-c-format
msgid "Booting OldWorld PowerMacs from MacOS"
msgstr ""

#. Tag: para
#: boot-installer.xml:2408
#, no-c-format
msgid "If you set up BootX in <xref linkend=\"files-oldworld\"/>, you can use it to boot into the installation system. Double click the <guiicon>BootX</guiicon> application icon. Click on the <guibutton>Options</guibutton> button and select <guilabel>Use Specified RAM Disk</guilabel>. This will give you the chance to select the <filename>ramdisk.image.gz</filename> file. You may need to select the <guilabel>No Video Driver</guilabel> checkbox, depending on your hardware. Then click the <guibutton>Linux</guibutton> button to shut down MacOS and launch the installer."
msgstr ""

#. Tag: title
#: boot-installer.xml:2426
#, no-c-format
msgid "Booting NewWorld Macs from OpenFirmware"
msgstr ""

#. Tag: para
#: boot-installer.xml:2427
#, no-c-format
msgid ""
"You will have already placed the <filename>vmlinux</filename>, <filename>initrd.gz</filename>, <filename>yaboot</filename>, and <filename>yaboot.conf</filename> files at the root level of your HFS partition in <xref linkend=\"files-newworld\"/>. Restart the computer, and immediately (during the chime) hold down the <keycap>Option</keycap>, <keycap>Command (cloverleaf/Apple)</keycap>, <keycap>o</keycap>, and <keycap>f</keycap> keys all together. After a few seconds you will be presented with the Open Firmware prompt. At the prompt, type <informalexample><screen>\n"
"0 &gt; boot hd:<replaceable>x</replaceable>,yaboot\n"
"</screen></informalexample> replacing <replaceable>x</replaceable> with the partition number of the HFS partition where the kernel and yaboot files were placed, followed by a &enterkey;. On some machines, you may need to use <userinput>ide0:</userinput> instead of <userinput>hd:</userinput>. In a few more seconds you will see a yaboot prompt <informalexample><screen>\n"
"boot:\n"
"</screen></informalexample> At yaboot's <prompt>boot:</prompt> prompt, type either <userinput>install</userinput> or <userinput>install video=ofonly</userinput> followed by a &enterkey;. The <userinput>video=ofonly</userinput> argument is for maximum compatibility; you can try it if <userinput>install</userinput> doesn't work. The Debian installation program should start."
msgstr ""

#. Tag: title
#: boot-installer.xml:2462
#, no-c-format
msgid "Booting from USB memory stick"
msgstr "Indítás USB memóriáról"

#. Tag: para
#: boot-installer.xml:2463
#, no-c-format
msgid "Currently, NewWorld PowerMac systems are known to support USB booting."
msgstr ""

#. Tag: para
#: boot-installer.xml:2469
#, no-c-format
msgid "Make sure you have prepared everything from <xref linkend=\"boot-usb-files\"/>. To boot a Macintosh system from a USB stick, you will need to use the Open Firmware prompt, since Open Firmware does not search USB storage devices by default. To get to the prompt, hold down <keycombo><keycap>Command</keycap> <keycap>Option</keycap> <keycap>o</keycap> <keycap>f</keycap></keycombo> all together while booting (see <xref linkend=\"invoking-openfirmware\"/>)."
msgstr ""

#. Tag: para
#: boot-installer.xml:2481
#, no-c-format
msgid "You will need to work out where the USB storage device appears in the device tree, since at the moment <command>ofpath</command> cannot work that out automatically. Type <userinput>dev / ls</userinput> and <userinput>devalias</userinput> at the Open Firmware prompt to get a list of all known devices and device aliases. On the author's system with various types of USB stick, paths such as <filename>usb0/disk</filename>, <filename>usb0/hub/disk</filename>, <filename>/pci@f2000000/usb@1b,1/disk@1</filename>, and <filename>/pci@f2000000/usb@1b,1/hub@1/disk@1</filename> work."
msgstr ""

#. Tag: para
#: boot-installer.xml:2493
#, no-c-format
msgid ""
"Having worked out the device path, use a command like this to boot the installer: <informalexample><screen>\n"
"boot <replaceable>usb0/disk</replaceable>:<replaceable>2</replaceable>,\\\\:tbxi\n"
"</screen></informalexample> The <replaceable>2</replaceable> matches the Apple_HFS or Apple_Bootstrap partition onto which you copied the boot image earlier, and the <userinput>,\\\\:tbxi</userinput> part instructs Open Firmware to boot from the file with an HFS file type of \"tbxi\" (i.e. <command>yaboot</command>) in the directory previously blessed with <command>hattrib -b</command>."
msgstr ""

#. Tag: para
#: boot-installer.xml:2507
#, no-c-format
msgid "The system should now boot up, and you should be presented with the <prompt>boot:</prompt> prompt. Here you can enter optional boot arguments, or just hit &enterkey;."
msgstr "A rendszer elindul és erről ad egy <prompt>boot:</prompt> jelet. A 2 lehetőség: további indító argumentumok megadása vagy az &enterkey; leütése."

#. Tag: para
#: boot-installer.xml:2513
#, no-c-format
msgid "This boot method is new, and may be difficult to get to work on some NewWorld systems. If you have problems, please file an installation report, as explained in <xref linkend=\"submit-bug\"/>."
msgstr ""

#. Tag: para
#: boot-installer.xml:2546
#, no-c-format
msgid "Currently, PReP and New World PowerMac systems support netbooting."
msgstr ""

#. Tag: para
#: boot-installer.xml:2550
#, no-c-format
msgid "On machines with Open Firmware, such as NewWorld Power Macs, enter the boot monitor (see <xref linkend=\"invoking-openfirmware\"/>) and use the command <command>boot enet:0</command>. PReP and CHRP boxes may have different ways of addressing the network. On a PReP machine, you should try <userinput>boot net:<replaceable>server_ipaddr</replaceable>,<replaceable>file</replaceable>,<replaceable>client_ipaddr</replaceable></userinput>. On some PReP systems (e.g. Motorola PowerStack machines) the command <userinput>help boot</userinput> may give a description of syntax and available options."
msgstr ""

#. Tag: para
#: boot-installer.xml:2568
#, no-c-format
msgid "Booting from floppies is supported for &arch-title;, although it is generally only applicable for OldWorld systems. NewWorld systems are not equipped with floppy drives, and attached USB floppy drives are not supported for booting."
msgstr ""

#. Tag: para
#: boot-installer.xml:2580
#, no-c-format
msgid "To boot from the <filename>boot-floppy-hfs.img</filename> floppy, place it in floppy drive after shutting the system down, and before pressing the power-on button."
msgstr "A <filename>boot-floppy-hfs.img</filename> flopi indításához, tedd a flopi meghajtóba a rendszer leállítása után, a bekapcsoló megnyomása előtt."

#. Tag: para
#: boot-installer.xml:2586
#, no-c-format
msgid "For those not familiar with Macintosh floppy operations: a floppy placed in the machine prior to boot will be the first priority for the system to boot from. A floppy without a valid boot system will be ejected, and the machine will then check for bootable hard disk partitions."
msgstr ""

#. Tag: para
#: boot-installer.xml:2593
#, no-c-format
msgid "After booting, the <filename>root.bin</filename> floppy is requested. Insert the root floppy and press &enterkey;. The installer program is automatically launched after the root system has been loaded into memory."
msgstr "Indítás után a <filename>root.bin</filename> flopi kell. Tedd be a root flopit és üsd le az &enterkey;-t. A telepítő program elindul a gyökér rendszer memóriába töltése után."

#. Tag: title
#: boot-installer.xml:2604
#, no-c-format
msgid "PowerPC Boot Parameters"
msgstr "PowerPC indító paraméterek"

#. Tag: para
#: boot-installer.xml:2605
#, no-c-format
msgid "Many older Apple monitors used a 640x480 67Hz mode. If your video appears skewed on an older Apple monitor, try appending the boot argument <userinput>video=atyfb:vmode:6</userinput> , which will select that mode for most Mach64 and Rage video hardware. For Rage 128 hardware, this changes to <userinput>video=aty128fb:vmode:6</userinput> ."
msgstr ""

#. Tag: para
#: boot-installer.xml:2645
#, no-c-format
msgid "On machines with OpenBoot, simply enter the boot monitor on the machine which is being installed (see <xref linkend=\"invoking-openboot\"/>). Use the command <userinput>boot net</userinput> to boot from a TFTP and RARP server, or try <userinput>boot net:bootp</userinput> or <userinput>boot net:dhcp</userinput> to boot from a TFTP and BOOTP or DHCP server."
msgstr ""

#. Tag: para
#: boot-installer.xml:2699
#, no-c-format
msgid "Most OpenBoot versions support the <userinput>boot cdrom</userinput> command which is simply an alias to boot from the SCSI device on ID 6 (or the secondary master for IDE based systems)."
msgstr ""

#. Tag: para
#: boot-installer.xml:2711
#, no-c-format
msgid "Floppy images are currently only available for sparc32, but, for technical reasons, not for official releases. (The reason is that they can only be built as root, which is not supported by our build daemons.) Look under <quote>daily built images</quote> on the <ulink url=\"&url-d-i;\">Debian Installer project website</ulink> for links to floppy images for sparc32."
msgstr ""

#. Tag: para
#: boot-installer.xml:2720
#, no-c-format
msgid ""
"To boot from floppy on a Sparc, use <informalexample><screen>\n"
"Stop-A -&gt; OpenBoot: \"boot floppy\"\n"
"</screen></informalexample> Be warned that the newer Sun4u (ultra) architecture does not support floppy booting. A typical error message is <computeroutput>Bad magic number in disk label - Can't open disk label package</computeroutput>."
msgstr ""

#. Tag: para
#: boot-installer.xml:2730
#, no-c-format
msgid "Several Sparcs (e.g. Ultra 10) have an OBP bug that prevents them from booting (instead of not supporting booting at all). The appropriate OBP update can be downloaded as product ID 106121 from <ulink url=\"http://sunsolve.sun.com\"></ulink>."
msgstr ""

#. Tag: para
#: boot-installer.xml:2737
#, no-c-format
msgid ""
"If you are booting from the floppy, and you see messages such as <informalexample><screen>\n"
"Fatal error: Cannot read partition\n"
"Illegal or malformed device name\n"
"</screen></informalexample> then it is possible that floppy booting is simply not supported on your machine."
msgstr ""
"Ha flopiról indítanál, de ehhez hasonló üzeneteket kapsz:<informalexample><screen>\n"
"Fatal error: Cannot read partition\n"
"Illegal or malformed device name\n"
"</screen></informalexample> lehet, hogy a flopi indítás egyszerűen nem támogatott e gépen."

#. Tag: title
#: boot-installer.xml:2749
#, no-c-format
msgid "IDPROM Messages"
msgstr "IDPROM üzenetek"

#. Tag: para
#: boot-installer.xml:2750
#, no-c-format
msgid "If you cannot boot because you get messages about a problem with <quote>IDPROM</quote>, then it's possible that your NVRAM battery, which holds configuration information for you firmware, has run out. See the <ulink url=\"&url-sun-nvram-faq;\">Sun NVRAM FAQ</ulink> for more information."
msgstr "Ha <quote>IDPROM</quote> gondokról szóló üzenetek miatt nem tudsz indítani, lehet, hogy az NVRAM elem, mely a firmware beállításait tartalmazza, lemerült. Lásd a <ulink url=\"&url-sun-nvram-faq;\">Sun NVRAM GYIK</ulink> címet több adatért."

#. Tag: para
#: boot-installer.xml:2769
#, no-c-format
msgid "Boot parameters are Linux kernel parameters which are generally used to make sure that peripherals are dealt with properly. For the most part, the kernel can auto-detect information about your peripherals. However, in some cases you'll have to help the kernel a bit."
msgstr "Az indító paraméterek Linux kernel paraméterek, melyek általában a perifériák helyes használatára szolgálnak. A kernel általában képes ezek adatainak automatikus érzékelésére. Egyes esetekben azonban egy kis segítség szükséges."

#. Tag: para
#: boot-installer.xml:2776
#, no-c-format
msgid "If this is the first time you're booting the system, try the default boot parameters (i.e., don't try setting parameters) and see if it works correctly. It probably will. If not, you can reboot later and look for any special parameters that inform the system about your hardware."
msgstr "A rendszert 1. ízben az alap paraméterekkel jó indítani (vagyis továbbiak megadása nélkül) és meggyőződni arról, működése helyes-e. Ha nem, egy későbbi újraindításkor megadhatók különleges paraméterek, melyek a rendszert kisegítik egyes adatokkal a hardverről."

#. Tag: para
#: boot-installer.xml:2783
#, no-c-format
msgid "Information on many boot parameters can be found in the <ulink url=\"http://www.tldp.org/HOWTO/BootPrompt-HOWTO.html\"> Linux BootPrompt HOWTO</ulink>, including tips for obscure hardware. This section contains only a sketch of the most salient parameters. Some common gotchas are included below in <xref linkend=\"boot-troubleshooting\"/>."
msgstr "Sok indító paraméterről szóló adat van a <ulink url=\"http://www.tldp.org/HOWTO/BootPrompt-HOWTO.html\"> Linux BootPrompt HOGYAN</ulink> leírásban, benne kétes hardverekről szólók is. Ez csak egy vázlatos szakasz a legáltalánosabb paraméterekről. Néhány szokásos találat megtalálható az alábbi: <xref linkend=\"boot-troubleshooting\"/> részben."

#. Tag: para
#: boot-installer.xml:2792
#, no-c-format
msgid ""
"When the kernel boots, a message <informalexample><screen>\n"
"Memory:<replaceable>avail</replaceable>k/<replaceable>total</replaceable>k available\n"
"</screen></informalexample> should be emitted early in the process. <replaceable>total</replaceable> should match the total amount of RAM, in kilobytes. If this doesn't match the actual amount of RAM you have installed, you need to use the <userinput>mem=<replaceable>ram</replaceable></userinput> parameter, where <replaceable>ram</replaceable> is set to the amount of memory, suffixed with <quote>k</quote> for kilobytes, or <quote>m</quote> for megabytes. For example, both <userinput>mem=65536k</userinput> and <userinput>mem=64m</userinput> mean 64MB of RAM."
msgstr ""
"A kernel indulásakor egy <informalexample><screen>\n"
"Memory:<replaceable>avail</replaceable>k/<replaceable>total</replaceable>k available\n"
"</screen></informalexample> üzenet látható a folyamat elején. A <replaceable>total</replaceable> a RAM teljes méretét adja kilobájtban. Ha nem pontos, a <userinput>mem=<replaceable>ram</replaceable></userinput> paraméter használandó, ahol a <replaceable>ram</replaceable> a memória mérete, melyet <quote>k</quote> követ kilobájtokhoz, vagy <quote>m</quote> megabájtokhoz. Például a <userinput>mem=65536k</userinput> és <userinput>mem=64m</userinput> jelentése egyaránt 64MB RAM."

#. Tag: para
#: boot-installer.xml:2808
#, no-c-format
msgid "If you are booting with a serial console, generally the kernel will autodetect this<phrase arch=\"mipsel\"> (although not on DECstations)</phrase>. If you have a videocard (framebuffer) and a keyboard also attached to the computer which you wish to boot via serial console, you may have to pass the <userinput>console=<replaceable>device</replaceable></userinput> argument to the kernel, where <replaceable>device</replaceable> is your serial device, which is usually something like <filename>ttyS0</filename>."
msgstr "Soros konzollal indításkor a kernel általában automatikusan felismeri ezt<phrase arch=\"mipsel\"> (DECstation esetén nem)</phrase>. Ha van videó kártya (framebuffer) és billentyűzet a soros konzol által indítandó gépen, át kell adni a <userinput>console=<replaceable>eszköz</replaceable></userinput> argumentumot a kernelnek, ahol az <replaceable>eszköz</replaceable> a soros eszköz, mely általában valami ilyesmi: <filename>ttyS0</filename>."

#. Tag: para
#: boot-installer.xml:2821
#, no-c-format
msgid "For &arch-title; the serial devices are <filename>ttya</filename> or <filename>ttyb</filename>. Alternatively, set the <envar>input-device</envar> and <envar>output-device</envar> OpenPROM variables to <filename>ttya</filename>."
msgstr "&arch-title; architektúrán a soros eszközök neve <filename>ttya</filename> vagy <filename>ttyb</filename>. Vagy állítsd be, hogy az <envar>input-device</envar> és <envar>output-device</envar> OpenPROM változók értéke legyen <filename>ttya</filename>."

#. Tag: title
#: boot-installer.xml:2832
#, no-c-format
msgid "Debian Installer Parameters"
msgstr "Debian Telepítő paraméterek"

#. Tag: para
#: boot-installer.xml:2833
#, no-c-format
msgid "The installation system recognizes a few additional boot parameters<footnote> <para> With current kernels (2.6.9 or newer) you can use 32 command line options and 32 environment options. If these numbers are exceeded, the kernel will panic. </para> </footnote> which may be useful."
msgstr "A telepítő rendszer pár további indító paramétert is ismer<footnote> <para> A jelenlegi kernelekkel  (2.6.9 vagy újabb) 32 parancssori opció és 32 környezeti opció használható. Ennek túllépése kernel pánikot okoz. </para> </footnote> mely hasznos lehet."

#. Tag: para
#: boot-installer.xml:2846
#, no-c-format
msgid "A number of parameters have a <quote>short form</quote> that helps avoid the limitations of the kernel command line options and makes entering the parameters easier. If a parameter has a short form, it will be listed in brackets behind the (normal) long form. Examples in this manual will normally use the short form too."
msgstr "Sok paraméterhez van egy <quote>rövid forma</quote>, mely segít elkerülni a kernel parancs-sori opciók korlátját és könnyebbé teszi a paraméterek megadását. Ha egy paraméternek van rövid formája, zárójelben írjuk a (rendes) hosszú forma után. A példák is a rövid formát használják."

#. Tag: term
#: boot-installer.xml:2858
#, no-c-format
msgid "debconf/priority (priority)"
msgstr "debconf/priority (elsőbbség)"

#. Tag: para
#: boot-installer.xml:2859
#, no-c-format
msgid "This parameter sets the lowest priority of messages to be displayed."
msgstr "E paraméter adja meg a megjelenítendő üzenetek legkisebb elsőbbségét."

#. Tag: para
#: boot-installer.xml:2863
#, no-c-format
msgid "The default installation uses <userinput>priority=high</userinput>. This means that both high and critical priority messages are shown, but medium and low priority messages are skipped. If problems are encountered, the installer adjusts the priority as needed."
msgstr "Az alap telepítés a <userinput>priority=high</userinput> értéket használja. Ekkor a kritikus és magas elsőbbségű üzenetek jelennek meg, a közepes és alacsony elsőbbségű üzenetek nem. Hibák esetén a telepítő a szükséges szintre állítja ezt."

#. Tag: para
#: boot-installer.xml:2870
#, no-c-format
msgid "If you add <userinput>priority=medium</userinput> as boot parameter, you will be shown the installation menu and gain more control over the installation. When <userinput>priority=low</userinput> is used, all messages are shown (this is equivalent to the <emphasis>expert</emphasis> boot method). With <userinput>priority=critical</userinput>, the installation system will display only critical messages and try to do the right thing without fuss."
msgstr "A <userinput>priority=medium</userinput> részletesebb irányítást ad a telepítéshez. A <userinput>priority=low</userinput> mindent kérdez (ez ugyanaz, mint az <emphasis>expert</emphasis> indítás mód). A <userinput>priority=critical</userinput> esetén a rendszer csak a kritikus üzeneteket jeleníti meg és ha minden rendben, nem kérdez."

#. Tag: term
#: boot-installer.xml:2884
#, no-c-format
msgid "DEBIAN_FRONTEND"
msgstr "DEBIAN_FRONTEND"

#. Tag: para
#: boot-installer.xml:2885
#, no-c-format
msgid "This boot parameter controls the type of user interface used for the installer. The current possible parameter settings are: <itemizedlist> <listitem> <para><userinput>DEBIAN_FRONTEND=noninteractive</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=text</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=newt</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=gtk</userinput></para> </listitem> </itemizedlist> The default frontend is <userinput>DEBIAN_FRONTEND=newt</userinput>. <userinput>DEBIAN_FRONTEND=text</userinput> may be preferable for serial console installs. Generally, only the <userinput>newt</userinput> frontend is available on default install media. On architectures that support it, the graphical installer uses the <userinput>gtk</userinput> frontend."
msgstr "Ez szabja meg a telepítő által használt felhasználó felületet. A jelenlegi lehetséges paraméter beállítások: <itemizedlist> <listitem> <para><userinput>DEBIAN_FRONTEND=noninteractive</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=text</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=newt</userinput></para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=gtk</userinput></para> </listitem> </itemizedlist> Az alapfelület a <userinput>DEBIAN_FRONTEND=newt</userinput>. A <userinput>DEBIAN_FRONTEND=text</userinput> soros konzolos telepítésekhez jó. Általában csak a <userinput>newt</userinput> felület elérhető az alap telepítő médián. A támogató architektúrákon a grafikus telepítő a <userinput>gtk</userinput> felületet használja."

#. Tag: term
#: boot-installer.xml:2914
#, no-c-format
msgid "BOOT_DEBUG"
msgstr "BOOT_DEBUG"

#. Tag: para
#: boot-installer.xml:2915
#, no-c-format
msgid "Setting this boot parameter to 2 will cause the installer's boot process to be verbosely logged. Setting it to 3 makes debug shells available at strategic points in the boot process. (Exit the shells to continue the boot process.)"
msgstr "Ha e paraméter értéke 2, a telepítő indító folyamat részletesebb naplózásra kerül. Ha 3, hibakereső héjakat tesz elérhetővé az indító folyamat fő pontjain. (Lépj ki a héjakból az indító folyamat folytatásához.)"

#. Tag: userinput
#: boot-installer.xml:2924
#, no-c-format
msgid "BOOT_DEBUG=0"
msgstr "BOOT_DEBUG=0"

#. Tag: para
#: boot-installer.xml:2925
#, no-c-format
msgid "This is the default."
msgstr "Ez az alap."

#. Tag: userinput
#: boot-installer.xml:2929
#, no-c-format
msgid "BOOT_DEBUG=1"
msgstr "BOOT_DEBUG=1"

#. Tag: para
#: boot-installer.xml:2930
#, no-c-format
msgid "More verbose than usual."
msgstr "Átlagnál bővebb."

#. Tag: userinput
#: boot-installer.xml:2934
#, no-c-format
msgid "BOOT_DEBUG=2"
msgstr "BOOT_DEBUG=2"

#. Tag: para
#: boot-installer.xml:2935
#, no-c-format
msgid "Lots of debugging information."
msgstr "Sok hibakereső adat."

#. Tag: userinput
#: boot-installer.xml:2939
#, no-c-format
msgid "BOOT_DEBUG=3"
msgstr "BOOT_DEBUG=3"

#. Tag: para
#: boot-installer.xml:2940
#, no-c-format
msgid "Shells are run at various points in the boot process to allow detailed debugging. Exit the shell to continue the boot."
msgstr "A héjak az indító folyamat különböző pontjain futnak részletes hibák visszaadásához. Lépj ki a héjból az indítás folytatásához."

#. Tag: term
#: boot-installer.xml:2954
#, no-c-format
msgid "INSTALL_MEDIA_DEV"
msgstr "INSTALL_MEDIA_DEV"

#. Tag: para
#: boot-installer.xml:2955
#, no-c-format
msgid "The value of the parameter is the path to the device to load the Debian installer from. For example, <userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</userinput>"
msgstr "E paraméter értéke a Debian telepítőt betöltő eszköz útvonala. Például <userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</userinput>"

#. Tag: para
#: boot-installer.xml:2961
#, no-c-format
msgid "The boot floppy, which normally scans all floppies it can to find the root floppy, can be overridden by this parameter to only look at the one device."
msgstr "Az indító flopi, ami alapban végignézi az összes flopit a gyökér flopi megtalálásához felülírható e paraméterrel, hogy csak 1 eszközt nézzen."

#. Tag: term
#: boot-installer.xml:2971
#, no-c-format
msgid "debian-installer/framebuffer (fb)"
msgstr "debian-installer/framebuffer (fb)"

#. Tag: para
#: boot-installer.xml:2972
#, no-c-format
msgid "Some architectures use the kernel framebuffer to offer installation in a number of languages. If framebuffer causes a problem on your system you can disable the feature by the parameter <userinput>fb=false</userinput>. Problem symptoms are error messages about bterm or bogl, a blank screen, or a freeze within a few minutes after starting the install."
msgstr "Egyes architektúrák használják a kernel framebuffert a telepítő több-nyelvű támogatásához. Ha ez gondot okoz, kikapcsolható az <userinput>fb=false</userinput> paraméterrel. A szokásos gondok hibaüzenetek a bterm és bogl körül, üres képernyő vagy fagyás a telepítés indítása után pár perccel."

#. Tag: para
#: boot-installer.xml:2981
#, no-c-format
msgid "The <userinput>video=vga16:off</userinput> argument may also be used to disable the kernel's use of the framebuffer. Such problems have been reported on a Dell Inspiron with Mobile Radeon card."
msgstr "A <userinput>video=vga16:off</userinput> argumentum szintén használható a kernel framebuffer kikapcsolására. Ilyen gondok vannak a Dell Inspiron gépeken Mobil Radeon kártya esetén."

#. Tag: para
#: boot-installer.xml:2987
#, no-c-format
msgid "Such problems have been reported on the Amiga 1200 and SE/30."
msgstr "Hasonló problémákról érkezett jelentés az Amiga 1200 és SE/30 gépeken."

#. Tag: para
#: boot-installer.xml:2991
#, no-c-format
msgid "Such problems have been reported on hppa."
msgstr "Hasonló problémákról érkezett jelentés egyes hppa gépeken."

#. Tag: para
#: boot-installer.xml:2995
#, no-c-format
msgid "Because of display problems on some systems, framebuffer support is <emphasis>disabled by default</emphasis> for &arch-title;. This can result in ugly display on systems that do properly support the framebuffer, like those with ATI graphical cards. If you see display problems in the installer, you can try booting with parameter <userinput>debian-installer/framebuffer=true</userinput> or <userinput>fb=true</userinput> for short."
msgstr "Egyes rendszerek kijelző-gondjai miatt a framebuffer támogatás <emphasis>alapból kikapcsolt</emphasis> &arch-title; architektúránál. Ez kissé csúf megjelenést okozhat ott, ahol a támogatás amúgy működne, például ATI kártyák esetén. A kijelző problémákat látsz a telepítőben, indíthatsz a <userinput>debian-installer/framebuffer=true</userinput> vagy röviden <userinput>fb=true</userinput> paraméterrel."

#. Tag: term
#: boot-installer.xml:3009
#, no-c-format
msgid "debian-installer/theme (theme)"
msgstr "debian-installer/theme (téma)"

#. Tag: para
#: boot-installer.xml:3010
#, no-c-format
msgid "A theme determines how the user interface of the installer looks (colors, icons, etc.). What themes are available differs per frontend. Currently both the newt and gtk frontends only have a <quote>dark</quote> theme that was designed for visually impaired users. Set the theme by booting with <userinput>theme=<replaceable>dark</replaceable></userinput>."
msgstr "Egy téma meghatározza, hogyan nézzen ki a telepítő felhasználói felülete (színek, ikonok, stb.). Az elérhető témák a felülettől függenek. A newt és gtk felületek is támogatják a <quote>dark</quote> témát, mely gyengén látóknak is megfelelő. A téma így állítható be: <userinput>theme=<replaceable>dark</replaceable></userinput>."

#. Tag: term
#: boot-installer.xml:3022
#, no-c-format
msgid "debian-installer/probe/usb"
msgstr "debian-installer/probe/usb"

#. Tag: para
#: boot-installer.xml:3023
#, no-c-format
msgid "Set to <userinput>false</userinput> to prevent probing for USB on boot, if that causes problems."
msgstr "A <userinput>false</userinput> tiltja az USB indítást, ha gondot okoz."

#. Tag: term
#: boot-installer.xml:3032
#: boot-installer.xml:3209
#, no-c-format
msgid "netcfg/disable_dhcp"
msgstr "netcfg/disable_dhcp"

#. Tag: para
#: boot-installer.xml:3033
#, no-c-format
msgid "By default, the &d-i; automatically probes for network configuration via DHCP. If the probe succeeds, you won't have a chance to review and change the obtained settings. You can get to the manual network setup only in case the DHCP probe fails."
msgstr "Alapértelmezetten a &d-i; önműködően megpróbálja a hálózatot beállítani DHCP-n át. Ha sikerül, valószínűleg nem lesz esély a kapott beállítások módosítására. A hálózat kézi beállítása csak a DHCP meghiúsulásakor lehetséges."

#. Tag: para
#: boot-installer.xml:3040
#, no-c-format
msgid "If you have a DHCP server on your local network, but want to avoid it because e.g. it gives wrong answers, you can use the parameter <userinput>netcfg/disable_dhcp=true</userinput> to prevent configuring the network with DHCP and to enter the information manually."
msgstr "Ha van egy DHCP kiszolgáló a helyi hálózaton, de nem akarod használni, mert például rossz választ ad, használhatod a <userinput>netcfg/disable_dhcp=true</userinput> paramétert a hálózati DHCP-beállítás tiltására és megadhatod az adatokat kézzel."

#. Tag: term
#: boot-installer.xml:3051
#, no-c-format
msgid "hw-detect/start_pcmcia"
msgstr "hw-detect/start_pcmcia"

#. Tag: para
#: boot-installer.xml:3052
#, no-c-format
msgid "Set to <userinput>false</userinput> to prevent starting PCMCIA services, if that causes problems. Some laptops are well known for this misbehavior."
msgstr "A <userinput>false</userinput> tiltja a PCMCIA szolgáltatások indítását, ha gondot okoznak. Egyes laptopok híresek erről."

#. Tag: term
#: boot-installer.xml:3062
#, no-c-format
msgid "preseed/url (url)"
msgstr "preseed/url (url)"

#. Tag: para
#: boot-installer.xml:3063
#, no-c-format
msgid "Specify the url to a preconfiguration file to download and use for automating the install. See <xref linkend=\"automatic-install\"/>."
msgstr "Megadja az automata telepítéshez letöltendő és használandó elő-beállító fájlra mutató url-t. Lásd a <xref linkend=\"automatic-install\"/> részt."

#. Tag: term
#: boot-installer.xml:3072
#, no-c-format
msgid "preseed/file (file)"
msgstr "preseed/file (fájl)"

#. Tag: para
#: boot-installer.xml:3073
#, no-c-format
msgid "Specify the path to a preconfiguration file to load for automating the install. See <xref linkend=\"automatic-install\"/>."
msgstr "Megadja az automata telepítéshez betöltendő elő-beállító fájl útvonalát. Lásd a <xref linkend=\"automatic-install\"/> részt."

#. Tag: term
#: boot-installer.xml:3082
#, no-c-format
msgid "preseed/interactive"
msgstr "preseed/interactive"

#. Tag: para
#: boot-installer.xml:3083
#, no-c-format
msgid "Set to <userinput>true</userinput> to display questions even if they have been preseeded. Can be useful for testing or debugging a preconfiguration file. See <xref linkend=\"preseed-seenflag\"/>."
msgstr "Legyen <userinput>true</userinput> az előírt kérdések feltevéséhez is. Egy előíró fájl próbájára vagy javítására jó. Lásd itt: <xref linkend=\"preseed-seenflag\"/>."

#. Tag: term
#: boot-installer.xml:3093
#, no-c-format
msgid "auto-install/enable (auto)"
msgstr "auto-install/enable (auto)"

#. Tag: para
#: boot-installer.xml:3094
#, no-c-format
msgid "Delay questions that are normally asked before preseeding is possible until after the network is configured. See <xref linkend=\"preseed-auto\"/> for details about using this to automate installs."
msgstr "Az elő-beállítások végrehajtása előtt felteendő kérdések megválaszolása elhalasztható a hálózat beállításáig. Lásd a <xref linkend=\"preseed-auto\"/> részt ennek használatához az automata telepítésben."

#. Tag: term
#: boot-installer.xml:3105
#, no-c-format
msgid "cdrom-detect/eject"
msgstr "cdrom-detect/eject"

#. Tag: para
#: boot-installer.xml:3106
#, no-c-format
msgid "By default, before rebooting, &d-i; automatically ejects the optical media used during the installation. This can be unnecessary if the system does not automatically boot off the CD. In some cases it may even be undesirable, for example if the optical drive cannot reinsert the media itself and the user is not there to do it manually. Many slot loading, slim-line, and caddy style drives cannot reload media automatically."
msgstr "Alapban az újraindítás előtt a &d-i; önműködően kiadja a telepítés alatt használt optikai médiát. Ez szükségtelen, ha a rendszer nem indul önműködően a CD-lemezről. Néha kimondottan rossz, például, ha az optikai meghajtó nem teszi be újra a médiát és a felhasználó nincs ott. Sok rés-töltős, karcsú és fentről-töltős stílusú meghajtó nem tudja automatikusan újratölteni a médiát."

#. Tag: para
#: boot-installer.xml:3115
#, no-c-format
msgid "Set to <userinput>false</userinput> to disable automatic ejection, and be aware that you may need to ensure that the system does not automatically boot from the optical drive after the initial installation."
msgstr "Legyen <userinput>false</userinput> az automata kiadás kikapcsolásához, ekkor magadnak kell biztosítani, hogy a rendszer ne induljon önműködően az optikai meghajtóról a telepítés után."

#. Tag: term
#: boot-installer.xml:3126
#, no-c-format
msgid "ramdisk_size"
msgstr "ramdisk_size"

#. Tag: para
#: boot-installer.xml:3127
#, no-c-format
msgid "This parameter should already be set to a correct value where needed; set it only it you see errors during the boot that indicate the ramdisk could not be loaded completely. The value is in kB."
msgstr ""

#. Tag: term
#: boot-installer.xml:3137
#, no-c-format
msgid "mouse/left"
msgstr "mouse/left"

#. Tag: para
#: boot-installer.xml:3138
#, no-c-format
msgid "For the gtk frontend (graphical installer), users can switch the mouse to left-handed operation by setting this parameter to <userinput>true</userinput>."
msgstr "A gtk felülethez (grafikus telepítő) a felhasználók az egeret bal-kezesre válthatják e paraméter <userinput>true</userinput> értékre állításával."

#. Tag: term
#: boot-installer.xml:3147
#, no-c-format
msgid "directfb/hw-accel"
msgstr "directfb/hw-accel"

#. Tag: para
#: boot-installer.xml:3148
#, no-c-format
msgid "For the gtk frontend (graphical installer), hardware acceleration in directfb is disabled by default. To enable it, set this parameter to <userinput>true</userinput> when booting the installer."
msgstr "A gtk felülethez (grafikus telepítő) a directfb hardveres gyorsítás alapból kikapcsolt. Bekapcsolásához, legyen a paraméter <userinput>true</userinput> a telepítő indításakor."

#. Tag: term
#: boot-installer.xml:3158
#, no-c-format
msgid "rescue/enable"
msgstr "rescue/enable"

#. Tag: para
#: boot-installer.xml:3159
#, no-c-format
msgid "Set to <userinput>true</userinput> to enter rescue mode rather than performing a normal installation. See <xref linkend=\"rescue\"/>."
msgstr "Legyen <userinput>true</userinput> a rendes telepítés helyett mentő módba lépéshez. Lásd: <xref linkend=\"rescue\"/>."

#. Tag: title
#: boot-installer.xml:3170
#, no-c-format
msgid "Using boot parameters to answer questions"
msgstr "Indító paraméterek használata kérdések megválaszolására"

#. Tag: para
#: boot-installer.xml:3171
#, no-c-format
msgid "With some exceptions, a value can be set at the boot prompt for any question asked during the installation, though this is only really useful in specific cases. General instructions how to do this can be found in <xref linkend=\"preseed-bootparms\"/>. Some specific examples are listed below."
msgstr "Pár kivétellel az indító jelnél bármely telepítés alatt feltett kérdés értéke beállítható, ez csak egyes esetekben igazán hasznos. Általános leírás erről a <xref linkend=\"preseed-bootparms\"/> részben. Íme pár példa."

#. Tag: term
#: boot-installer.xml:3183
#, no-c-format
msgid "debian-installer/locale (locale)"
msgstr "debian-installer/locale (honosítás)"

#. Tag: para
#: boot-installer.xml:3184
#, no-c-format
msgid "Can be used to set both the language and country for the installation. This will only work if the locale is supported in Debian. For example, use <userinput>locale=de_CH</userinput> to select German as language and Switzerland as country."
msgstr "A nyelv és ország beállítására használható. Minden Debian által támogatott helyi beállításra működik. Például a <userinput>locale=de_CH</userinput> német nyelvet választ, országnak pedig Svájcot."

#. Tag: term
#: boot-installer.xml:3195
#, no-c-format
msgid "anna/choose_modules (modules)"
msgstr "anna/choose_modules (modules)"

#. Tag: para
#: boot-installer.xml:3196
#, no-c-format
msgid "Can be used to automatically load installer components that are not loaded by default. Examples of optional components that may be useful are <classname>openssh-client-udeb</classname> (so you can use <command>scp</command> during the installation) and <classname>ppp-udeb</classname> (which supports PPPoE configuration)."
msgstr "Az alapban nem betöltött telepítő összetevők automata betöltésére használható. Példák lehetséges hasznos összetevőkre az <classname>openssh-client-udeb</classname> (így használhatod az <command>scp</command> másolót a telepítés alatt) és a <classname>ppp-udeb</classname> (ami támogatja a PPPoE beállítást)."

#. Tag: para
#: boot-installer.xml:3210
#, no-c-format
msgid "Set to <userinput>true</userinput> if you want to disable DHCP and instead force static network configuration."
msgstr "Állítsd <userinput>true</userinput> értékre a DHCP kikapcsolásához és helyette statikus hálózati beállítás kikényszerítéséhez."

#. Tag: term
#: boot-installer.xml:3219
#, no-c-format
msgid "mirror/protocol (protocol)"
msgstr "mirror/protocol (protocol)"

#. Tag: para
#: boot-installer.xml:3220
#, no-c-format
msgid "By default the installer will use the http protocol to download files from Debian mirrors and changing that to ftp is not possible during installations at normal priority. By setting this parameter to <userinput>ftp</userinput>, you can force the installer to use that protocol instead. Note that you cannot select an ftp mirror from a list, you have to enter the hostname manually."
msgstr "Alapban a telepítő http protokollt használ fájlok letöltésére Debian tükrökről és ftp protkollra cserélésre nincs mód telepítéskor normál elsőbbségnél. A paraméter beállítása <userinput>ftp</userinput> protokollra a telepítőt ennek használatára bírja. Fontos tudni, hogy a listából nem választható ftp tükör, ezt kézzel kell majd megadni."

#. Tag: term
#: boot-installer.xml:3233
#, no-c-format
msgid "tasksel:tasksel/first (tasks)"
msgstr "tasksel:tasksel/first (feladatok)"

#. Tag: para
#: boot-installer.xml:3234
#, no-c-format
msgid "Can be used to select tasks that are not available from the interactive task list, such as the <literal>kde-desktop</literal> task. See <xref linkend=\"pkgsel\"/> for additional information."
msgstr "Az interaktív listából el nem érhető feladatok kiválasztására használható, fontos például a <literal>hungarian-desktop</literal> használata. Lásd a <xref linkend=\"pkgsel\"/> részt további adatokért."

#. Tag: title
#: boot-installer.xml:3248
#, no-c-format
msgid "Passing parameters to kernel modules"
msgstr "Paraméterek átadása kernel moduloknak"

#. Tag: para
#: boot-installer.xml:3249
#, no-c-format
msgid "If drivers are compiled into the kernel, you can pass parameters to them as described in the kernel documentation. However, if drivers are compiled as modules and because kernel modules are loaded a bit differently during an installation than when booting an installed system, it is not possible to pass parameters to modules as you would normally do. Instead, you need to use a special syntax recognized by the installer which will then make sure that the parameters are saved in the proper configuration files and will thus be used when the modules are actually loaded. The parameters will also be propagated automatically to the configuration for the installed system."
msgstr "Kernelbe fordított meghajtók számára lehetséges a kernel dokumentációja szerinti paraméterek átadása. Ám akkor, ha modulokként fordítottak, mivel ezek kissé másképp töltődnek be a telepítéskor, mint a telepített rendszeren, nem adhatók át úgy paraméterek, mint rendesen. A telepítő által ismert különleges szintaxist kell használni, így ezek a helyes beállító fájlba kerülnek és felhasználásra kerülnek a modulok tényleges betöltésekor. E paraméterek átkerülnek a telepített rendszerbe is."

#. Tag: para
#: boot-installer.xml:3262
#, no-c-format
msgid "Note that it is now quite rare that parameters need to be passed to modules. In most cases the kernel will be able to probe the hardware present in a system and set good defaults that way. However, in some situations it may still be needed to set parameters manually."
msgstr "Erre ritkán van szükség. A kernel szinte mindig képes a rendszeren lévő hardvert kipróbálni és jó alapértelmezett értékeket beállítani. De egyes esetekben jól jöhet paraméterek kézi beállítása."

#. Tag: para
#: boot-installer.xml:3269
#, no-c-format
msgid ""
"The syntax to use to set parameters for modules is: <informalexample><screen>\n"
"<replaceable>module_name</replaceable>.<replaceable>parameter_name</replaceable>=<replaceable>value</replaceable>\n"
"</screen></informalexample> If you need to pass multiple parameters to the same or different modules, just repeat this. For example, to set an old 3Com network interface card to use the BNC (coax) connector and IRQ 10, you would pass:"
msgstr ""
"A modulokhoz beállítandó paraméterek nyelvtana:<informalexample><screen>\n"
"<replaceable>modul_név</replaceable>.<replaceable>paraméter_név</replaceable>=<replaceable>érték</replaceable>\n"
"</screen></informalexample> Ha több paramétert akarsz átadni egy vagy több modulhoz, csak ismételd ezt. Például egy régi 3Com hálózati csatoló kártya beállítása a BNC (koax) csatlakozó és IRQ 10 használatához:"

#. Tag: screen
#: boot-installer.xml:3279
#, no-c-format
msgid "3c509.xcvr=3 3c509.irq=10"
msgstr "3c509.xcvr=3 3c509.irq=10"

#. Tag: title
#: boot-installer.xml:3285
#, no-c-format
msgid "Blacklisting kernel modules"
msgstr "Kernel modulok feketelistája"

#. Tag: para
#: boot-installer.xml:3286
#, no-c-format
msgid "Sometimes it may be necessary to blacklist a module to prevent it from being loaded automatically by the kernel and udev. One reason could be that a particular module causes problems with your hardware. The kernel also sometimes lists two different drivers for the same device. This can cause the device to not work correctly if the drivers conflict or if the wrong driver is loaded first."
msgstr "Néha egy modult feketelistára kell tenni, hogy a kernel és udev ne töltse be. Például, ha gondot ad egy adott hardverrel. A kernel néha 2 eltérő modult ad egy eszközhöz. Ez problémás működést okozhat, e meghajtók ütközése vagy előbb rossz meghajtó betöltése esetén."

#. Tag: para
#: boot-installer.xml:3295
#, no-c-format
msgid "You can blacklist a module using the following syntax: <userinput><replaceable>module_name</replaceable>.blacklist=yes</userinput>. This will cause the module to be blacklisted in <filename>/etc/modprobe.d/blacklist.local</filename> both during the installation and for the installed system."
msgstr "Egy modul így tehető feketelistára: <userinput><replaceable>module_name</replaceable>.blacklist=yes</userinput>. Így a modul feketelistára kerül a <filename>/etc/modprobe.d/blacklist.local</filename> fájlban a telepítés és a telepített rendszer alatt is."

#. Tag: para
#: boot-installer.xml:3303
#, no-c-format
msgid "Note that a module may still be loaded by the installation system itself. You can prevent that from happening by running the installation in expert mode and unselecting the module from the list of modules displayed during the hardware detection phases."
msgstr "Lehet, hogy a modult a telepítő rendszer tölti be. Ez megakadályozható a telepítő szakértő módú futtatásával a modul kijelölt volta törlésével a hardver felismerő szakaszokban."

#. Tag: title
#: boot-installer.xml:3320
#, no-c-format
msgid "Troubleshooting the Installation Process"
msgstr "Hibák elhárítása a telepítő folyamat során"

#. Tag: title
#: boot-installer.xml:3325
#, no-c-format
msgid "CD-ROM Reliability"
msgstr "CD-ROM megbízhatóság"

#. Tag: para
#: boot-installer.xml:3326
#, no-c-format
msgid "Sometimes, especially with older CD-ROM drives, the installer may fail to boot from a CD-ROM. The installer may also &mdash; even after booting successfully from CD-ROM &mdash; fail to recognize the CD-ROM or return errors while reading from it during the installation."
msgstr "Néha, főleg régi CD-ROM meghajtókkal, a telepítő CD-ROM lemezről indítása meghiúsulhat. A telepítő &mdash; akár a CD-ROM lemezről való sikeres indítás után &mdash; talán nem ismeri fel a CD-ROM eszközt vagy hibákat ad a telepítés alatti olvasásakor."

#. Tag: para
#: boot-installer.xml:3333
#, no-c-format
msgid "There are a many different possible causes for these problems. We can only list some common issues and provide general suggestions on how to deal with them. The rest is up to you."
msgstr "Ennek sok eltérő oka lehet. Csak néhány szokásos hibát és kezelésükről szóló általános tanácsot írunk le. A többi tőled függ."

#. Tag: para
#: boot-installer.xml:3339
#, no-c-format
msgid "There are two very simple things that you should try first."
msgstr "Először 2 egyszerű dolgot érdemes kipróbálni."

#. Tag: para
#: boot-installer.xml:3344
#, no-c-format
msgid "If the CD-ROM does not boot, check that it was inserted correctly and that it is not dirty."
msgstr "Ha a CD-ROM nem indul, ellenőrizd, helyesen van-e betéve és nem piszkos-e."

#. Tag: para
#: boot-installer.xml:3350
#, no-c-format
msgid "If the installer fails to recognize a CD-ROM, try just running the option <menuchoice> <guimenuitem>Detect and mount CD-ROM</guimenuitem> </menuchoice> a second time. Some DMA related issues with older CD-ROM drives are known to be resolved in this way."
msgstr "Ha a telepítő nem ismeri fel a CD-ROM meghajtót, először próbáld meg a <menuchoice> <guimenuitem>CD-ROM felismerése és csatolása</guimenuitem> </menuchoice> pont futtatását másodszor. Több régi CD-ROM meghajtónál ismert DMA hiba megoldható így."

#. Tag: para
#: boot-installer.xml:3360
#, no-c-format
msgid "If this does not work, then try the suggestions in the subsections below. Most, but not all, suggestions discussed there are valid for both CD-ROM and DVD, but we'll use the term CD-ROM for simplicity."
msgstr "Ha ez nem megy, próbáld az alábbi javaslatokat. Általában az ott tárgyalt javaslatok a CD-ROM és DVD eszközökre egyaránt érvényesek, de az egyszerűség kedvéért mindig a CD-ROM szót használjuk."

#. Tag: para
#: boot-installer.xml:3366
#, no-c-format
msgid "If you cannot get the installation working from CD-ROM, try one of the other installation methods that are available."
msgstr "Ha a telepítés semmiképp nem megy a CD-ROM eszközről, próbálj egy másik elérhető telepítő módot."

#. Tag: title
#: boot-installer.xml:3374
#, no-c-format
msgid "Common issues"
msgstr "Általános hibák"

#. Tag: para
#: boot-installer.xml:3377
#, no-c-format
msgid "Some older CD-ROM drives do not support reading from discs that were burned at high speeds using a modern CD writer."
msgstr "Néhány régi CD-ROM meghajtó nem támogatja a korszerű CD-írók használatával nagy sebességgel írt lemezek olvasását."

#. Tag: para
#: boot-installer.xml:3383
#, no-c-format
msgid "If your system boots correctly from the CD-ROM, it does not necessarily mean that Linux also supports the CD-ROM (or, more correctly, the controller that your CD-ROM drive is connected to)."
msgstr "Ha a rendszer elindul a CD-ROM eszközről, ez nem feltétlenül jelenti, hogy a Linux is támogatja azt (vagy, pontosabban a vezérlőt, melyre a CD-ROM meghajtó kötve van)."

#. Tag: para
#: boot-installer.xml:3390
#, no-c-format
msgid "Some older CD-ROM drives do not work correctly if <quote>direct memory access</quote> (DMA) is enabled."
msgstr "Pár régi CD-ROM meghajtó nem működik rendesen a <quote>direkt memória elérés</quote> (DMA) bekapcsolt volta esetén."

#. Tag: title
#: boot-installer.xml:3401
#, no-c-format
msgid "How to investigate and maybe solve issues"
msgstr "Hogyan vizsgálj ki és oldj meg gondokat"

#. Tag: para
#: boot-installer.xml:3402
#, no-c-format
msgid "If the CD-ROM fails to boot, try the suggestions listed below."
msgstr "Ha a CD-ROM eszköz indítása sikertelen, próbáld ki az alább adott javaslatokat."

#. Tag: para
#: boot-installer.xml:3407
#, no-c-format
msgid "Check that your BIOS actually supports booting from CD-ROM (older systems possibly don't) and that your CD-ROM drive supports the media you are using."
msgstr "Ellenőrizd, hogy a BIOS támogatja a CD-ROM indítást (a régebbiek nem) és hogy a CD-rom meghajtó támogatja a használt médiát."

#. Tag: para
#: boot-installer.xml:3413
#, no-c-format
msgid ""
"If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the <filename>MD5SUMS</filename> file that should be present in the same location as where you downloaded the image from. <informalexample><screen>\n"
"$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
"a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
"</screen></informalexample> Next, check that the md5sum of the burned CD-ROM matches as well. The following command should work. It uses the size of the image to read the correct number of bytes from the CD-ROM."
msgstr ""
"Ha letöltöttél egy iso képet, ellenőrizd, hogy az md5sum egyezik az <filename>MD5SUMS</filename> fájlban lévővel, mely ugyanott van, ahonnan letöltötted. <informalexample><screen>\n"
"$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
"a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
"</screen></informalexample> Ezután ellenőrizd, hogy a megírt CD-ROM is egyezik. Az alábbi parancs kiváló. Használja a kép méretét helyes számú bájt olvasására a CD-ROM lemezről."

#. Tag: screen
#: boot-installer.xml:3426
#, no-c-format
msgid ""
"$ dd if=/dev/cdrom | \\\n"
"> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</replaceable>` | \\\n"
"> md5sum\n"
"a20391b12f7ff22ef705cee4059c6b92  -\n"
"262668+0 records in\n"
"262668+0 records out\n"
"134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"
msgstr ""
"$ dd if=/dev/cdrom | \\\n"
"> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</replaceable>` | \\\n"
"> md5sum\n"
"a20391b12f7ff22ef705cee4059c6b92  -\n"
"262668+0 rekord beolvasva\n"
"262668+0 rekord kiírva\n"
"134486016 bájt (134 MB) másolva, 97.474 másodperc, 1.4 MB/s"

#. Tag: para
#: boot-installer.xml:3431
#, no-c-format
msgid "If, after the installer has been booted successfully, the CD-ROM is not detected, sometimes simply trying again may solve the problem. If you have more than one CD-ROM drive, try changing the CD-ROM to the other drive. If that does not work or if the CD-ROM is recognized but there are errors when reading from it, try the suggestions listed below. Some basic knowledge of Linux is required for this. To execute any of the commands, you should first switch to the second virtual console (VT2) and activate the shell there."
msgstr "Ha a telepítő indulása után a CD-ROM érzékelése sikertelen, sokszor az ismételt kísérlet sikerül. Ha egynél több CD-ROM meghajtód van, tedd a lemezt a másikba. Ha ez sem válik be vagy a CD-ROM felismerésre kerül de hibák történnek az olvasáskor, próbáld a lenti javaslatokat. Ehhez kis Linux-ismeret kell. Parancsok használatához előbb válts a második virtuális terminálra (VT2), melyen aktiváld a héjat."

#. Tag: para
#: boot-installer.xml:3443
#, no-c-format
msgid "Switch to VT4 or view the contents of <filename>/var/log/syslog</filename> (use <command>nano</command> as editor) to check for any specific error messages. After that, also check the output of <command>dmesg</command>."
msgstr "Válts a VT4 terminálra vagy nézd meg a <filename>/var/log/syslog</filename> tartalmát (használd a <command>nano</command>-t szerkesztőként) a hibák ellenőrzéséhez. Ezután ellenőrizd a <command>dmesg</command> kimenetét is."

#. Tag: para
#: boot-installer.xml:3450
#, no-c-format
msgid ""
"Check in the output of <command>dmesg</command> if your CD-ROM drive was recognized. You should see something like (the lines do not necessarily have to be consecutive): <informalexample><screen>\n"
"Probing IDE interface ide1...\n"
"hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
"ide1 at 0x170-0x177,0x376 on irq 15\n"
"hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
"Uniform CD-ROM driver Revision: 3.20\n"
"</screen></informalexample> If you don't see something like that, chances are the controller your CD-ROM is connected to was not recognized or may be not supported at all. If you know what driver is needed for the controller, you can try loading it manually using <command>modprobe</command>."
msgstr ""
"Ellenőrizd a <command>dmesg</command> kimenetét, sikerült-e a CD-ROM meghajtó felismerése. Ilyesmit kell látnod benne (a sorok nem feltétlenül egymás utániak): <informalexample><screen>\n"
"Probing IDE interface ide1...\n"
"hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
"ide1 at 0x170-0x177,0x376 on irq 15\n"
"hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
"Uniform CD-ROM driver Revision: 3.20\n"
"</screen></informalexample> Ha nincs ilyesmi, lehet, hogy a vezérlő felismerése nem sikerült vagy egyáltalán nem támogatott. Ha tudod, milyen meghajtót igényel az adott, kézzel is betöltheted a <command>modprobe</command> paranccsal."

#. Tag: para
#: boot-installer.xml:3464
#, no-c-format
msgid "Check that there is a device node for your CD-ROM drive under <filename>/dev/</filename>. In the example above, this would be <filename>/dev/hdc</filename>. There should also be a <filename>/dev/cdroms/cdrom0</filename>."
msgstr "Ellenőrizd, van-e megfelelő eszköz-leíró fájl a CD-ROM meghajtóhoz a <filename>/dev/</filename> könyvtárban. A fenti példában ez a <filename>/dev/hdc</filename>. Lehet ez is: <filename>/dev/cdroms/cdrom0</filename>."

#. Tag: para
#: boot-installer.xml:3472
#, no-c-format
msgid ""
"Use the <command>mount</command> command to check if the CD-ROM is already mounted; if not, try mounting it manually: <informalexample><screen>\n"
"$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
"</screen></informalexample> Check if there are any error messages after that command."
msgstr ""
"Használd a <command>mount</command> parancsot a CD-ROM csatolt voltának ellenőrzésére; ha nincs, próbáld kézzel csatolni: <informalexample><screen>\n"
"$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
"</screen></informalexample> Ellenőrizd, ír-e hibát."

#. Tag: para
#: boot-installer.xml:3482
#, no-c-format
msgid ""
"Check if DMA is currently enabled: <informalexample><screen>\n"
"$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
"$ grep using_dma settings\n"
"using_dma      1       0       1       rw\n"
"</screen></informalexample> A <quote>1</quote> in the first column after <literal>using_dma</literal> means it is enabled. If it is, try disabling it: <informalexample><screen>\n"
"$ echo -n \"using_dma:0\" >settings\n"
"</screen></informalexample> Make sure that you are in the directory for the device that corresponds to your CD-ROM drive."
msgstr ""
"Ellenőrizd a DMA állapotát: <informalexample><screen>\n"
"$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
"$ grep dma settings\n"
"using_dma      1       0       1       rw\n"
"</screen></informalexample> Az <quote>1</quote> az 1. oszlopban a <literal>using_dma</literal> után azt jelenti: bekapcsolva. Ha így van, próbáld kikapcsolni: <informalexample><screen>\n"
"$ echo -n \"using_dma:0\" >settings\n"
"</screen></informalexample> Győződj meg, hogy a CD-ROM meghajtónak megfelelő könyvtárban vagy."

#. Tag: para
#: boot-installer.xml:3497
#, no-c-format
msgid "If there are any problems during the installation, try checking the integrity of the CD-ROM using the option near the bottom of the installer's main menu. This option can also be used as a general test if the CD-ROM can be read reliably."
msgstr "Ha gond támad a telepítés alatt, próbáld ki a CD-ROM épségének ellenőrzését a telepítő fő-menü vége felé található lehetőséggel. E lehetőség a CD-ROM eszközről való olvasás megbízhatóságának  általános ellenőrzésére is használható."

#. Tag: title
#: boot-installer.xml:3512
#, no-c-format
msgid "Floppy Disk Reliability"
msgstr "Flopi lemezek megbízhatósága"

#. Tag: para
#: boot-installer.xml:3514
#, no-c-format
msgid "The biggest problem for people using floppy disks to install Debian seems to be floppy disk reliability."
msgstr "A Debian rendszert flopiról telepítők számára a legnagyobb gond a flopi megbízhatatlansága."

#. Tag: para
#: boot-installer.xml:3519
#, no-c-format
msgid "The boot floppy is the floppy with the worst problems, because it is read by the hardware directly, before Linux boots. Often, the hardware doesn't read as reliably as the Linux floppy disk driver, and may just stop without printing an error message if it reads incorrect data. There can also be failures in the driver floppies, most of which indicate themselves with a flood of messages about disk I/O errors."
msgstr "Az indító flopival van a legtöbb gond, mert azt a gép közvetlenül olvassa a Linux indítása előtt. Ez pedig általában nem olvassa olyan megbízhatóan, mint a Linux flopi meghajtó és még üzenet nélkül is leállhat hibás adatok olvasásakor. Nagyon rossz az is, mikor a meghajtó flopikkal van gond, melyek ezt tömeges lemez I/O hiba üzenettel jelzik."

#. Tag: para
#: boot-installer.xml:3528
#, no-c-format
msgid "If you are having the installation stall at a particular floppy, the first thing you should do is write the image to a <emphasis>different</emphasis> floppy and see if that solves the problem. Simply reformatting the old floppy may not be sufficient, even if it appears that the floppy was reformatted and written with no errors. It is sometimes useful to try writing the floppy on a different system."
msgstr "Ha a telepítés elakad egy flopinál, legelőször írd a képet egy <emphasis>másik</emphasis> flopira, és nézd meg, ez megoldja-e a gondot. A régi flopi újraformázása általában akkor sem elég, ha nem írt hibát. Sok esetben csak az oldja meg, ha egy másik gépen írod meg."

#. Tag: para
#: boot-installer.xml:3537
#, no-c-format
msgid "One user reports he had to write the images to floppy <emphasis>three</emphasis> times before one worked, and then everything was fine with the third floppy."
msgstr "Többször előfordult, hogy egy felhasználó <emphasis>három</emphasis> teljesen új flopit használt fel, mire az egyik végre hibátlan volt és sikeresen telepített."

#. Tag: para
#: boot-installer.xml:3543
#, no-c-format
msgid "Normally you should not have to download a floppy image again, but if you are experiencing problems it is always useful to verify that the images were downloaded correctly by verifying their md5sums."
msgstr "Általában nem kell újra letöltened a flopi képet, de ha gondokat észlelsz, mindig hasznos ellenőrizni a képek helyesen letöltött voltát md5-összegük ellenőrzésével."

#. Tag: para
#: boot-installer.xml:3549
#, no-c-format
msgid "Other users have reported that simply rebooting a few times with the same floppy in the floppy drive can lead to a successful boot. This is all due to buggy hardware or firmware floppy drivers."
msgstr "Sokak gépe pedig csak többszöri indítás után tudta pontosan elolvasni a flopit és így ez csak ekkor tudott sikeresen elindulni. Ezt mind hibás hardver vagy firmware flopi meghajtók okozzák."

#. Tag: title
#: boot-installer.xml:3558
#, no-c-format
msgid "Boot Configuration"
msgstr "Indító beállítás"

#. Tag: para
#: boot-installer.xml:3560
#, no-c-format
msgid "If you have problems and the kernel hangs during the boot process, doesn't recognize peripherals you actually have, or drives are not recognized properly, the first thing to check is the boot parameters, as discussed in <xref linkend=\"boot-parms\"/>."
msgstr "Ha a kernel megáll az indító folyamat során, nem ismer fel perifériákat vagy meghajtókat helyesen, először az indító paramétereket kell ellenőrizni a korábbi <xref linkend=\"boot-parms\"/> szerint."

#. Tag: para
#: boot-installer.xml:3567
#, no-c-format
msgid "Often, problems can be solved by removing add-ons and peripherals, and then trying booting again. <phrase arch=\"x86\">Internal modems, sound cards, and Plug-n-Play devices can be especially problematic.</phrase>"
msgstr "Bizonyos gondok gyakran megoldhatók kiegészítők és perifériák eltávolításával és újraindítással. <phrase arch=\"x86\"> Egyes belső modemek, hangkártyák és Plug-n-Play eszközök sok gondot adnak.</phrase>"

#. Tag: para
#: boot-installer.xml:3573
#, no-c-format
msgid "If you have a large amount of memory installed in your machine, more than 512M, and the installer hangs when booting the kernel, you may need to include a boot argument to limit the amount of memory the kernel sees, such as <userinput>mem=512m</userinput>."
msgstr "Ha több, mint 512M memória van a gépen és a telepítő megáll a kernel indításakor, előfordulhat, hogy egy indító argumentumot kell megadni a kernel által nézett memória korlátozására így: <userinput>mem=512m</userinput>."

#. Tag: title
#: boot-installer.xml:3584
#: boot-installer.xml:3669
#, no-c-format
msgid "Common &arch-title; Installation Problems"
msgstr "Gyakori &arch-title; telepítő gondok"

#. Tag: para
#: boot-installer.xml:3585
#, no-c-format
msgid "There are some common installation problems that can be solved or avoided by passing certain boot parameters to the installer."
msgstr "Van pár gyakori telepítő gond, mely megoldható vagy elkerülhető egyes indító paraméterek átadásával a telepítőnek."

#. Tag: para
#: boot-installer.xml:3590
#, no-c-format
msgid "Some systems have floppies with <quote>inverted DCLs</quote>. If you receive errors reading from the floppy, even when you know the floppy is good, try the parameter <userinput>floppy=thinkpad</userinput>."
msgstr "Egyes rendszereken <quote>fordított DCL</quote> flopik vannak. Ha hibákat kapsz a flopiról olvasáskor, pedig tudod, hogy a flopi jó, próbáld a  <userinput>floppy=thinkpad</userinput> paramétert."

#. Tag: para
#: boot-installer.xml:3596
#, no-c-format
msgid "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk drivers), the IDE drive may not be properly recognized. Again, try it first without the parameters and see if the IDE drive is recognized properly. If not, determine your drive geometry (cylinders, heads, and sectors), and use the parameter <userinput>hd=<replaceable>cylinders</replaceable>,<replaceable>heads</replaceable>,<replaceable>sectors</replaceable></userinput>."
msgstr "Egyes rendszereken, ilyen például az IBM PS/1 vagy ValuePoint (melyben ST-506 lemez meghajtók vannak), az IDE meghajtó felismerése hibás lehet. Előbb paraméterek nélkül próbáld, és nézd meg, az IDE meghajtó felismerése helyes-e. Ha nem, ellenőrizd a meghajtó geometriáját (cilinderek, fejek, szektorok) és használd a <userinput>hd=<replaceable>cilinderek</replaceable>,<replaceable>fejek</replaceable>,<replaceable>szektorok</replaceable></userinput> paramétert."

#. Tag: para
#: boot-installer.xml:3605
#, no-c-format
msgid "If you have a very old machine, and the kernel hangs after saying <computeroutput>Checking 'hlt' instruction...</computeroutput>, then you should try the <userinput>no-hlt</userinput> boot argument, which disables this test."
msgstr "Nagyon régi gépnél, ha a kernel megáll itt: <computeroutput>Checking 'hlt' instruction...</computeroutput>, próbáld a <userinput>no-hlt</userinput> indító argumentumot, mely kikapcsolja ezt a tesztet."

#. Tag: para
#: boot-installer.xml:3612
#, no-c-format
msgid "If your screen begins to show a weird picture while the kernel boots, eg. pure white, pure black or colored pixel garbage, your system may contain a problematic video card which does not switch to the framebuffer mode properly. Then you can use the boot parameter <userinput>fb=false video=vga16:off</userinput> to disable the framebuffer console. Only a reduced set of languages will be available during the installation due to limited console features. See <xref linkend=\"boot-parms\"/> for details."
msgstr "Ha a képernyő fura képet ad a kernel indításakor, például tiszta fehér, tiszta fekete vagy színes kavar, a rendszer problematikus videó kártyát tartalmazhat, mely hibásan vált framebuffer módra. Ekkor használható az <userinput>fb=false video=vga16:off</userinput> indító paraméter ennek kikapcsolására. Ekkor kevesebb nyelv érhető el a telepítés alatt a konzol korlátozott képességei miatt. Lásd ezt: <xref linkend=\"boot-parms\"/> a részletekért."

#. Tag: title
#: boot-installer.xml:3626
#, no-c-format
msgid "System Freeze During the PCMCIA Configuration Phase"
msgstr "A rendszer fagyása a PCMCIA beállító szakaszban"

#. Tag: para
#: boot-installer.xml:3627
#, no-c-format
msgid "Some laptop models produced by Dell are known to crash when PCMCIA device detection tries to access some hardware addresses. Other laptops may display similar problems. If you experience such a problem and you don't need PCMCIA support during the installation, you can disable PCMCIA using the <userinput>hw-detect/start_pcmcia=false</userinput> boot parameter. You can then configure PCMCIA after the installation is completed and exclude the resource range causing the problems."
msgstr "Egyes Dell laptopok összeomlanak, mikor a PCMCIA eszköz-érzékelő megpróbál elérni egyes hardver-címeket. Pár más laptop is hasonló. Ha ilyen gondot tapasztalsz és nincs szükséged PCMCIA támogatásra a telepítéskor, kapcsold ki a <userinput>hw-detect/start_pcmcia=false</userinput> indító paraméterrel. A telepítés után beállíthatod és kizárhatod a gondot adó erőforrás-tartományokat."

#. Tag: para
#: boot-installer.xml:3637
#, no-c-format
msgid "Alternatively, you can boot the installer in expert mode. You will then be asked to enter the resource range options your hardware needs. For example, if you have one of the Dell laptops mentioned above, you should enter <userinput>exclude port 0x800-0x8ff</userinput> here. There is also a list of some common resource range options in the <ulink url=\"http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-1.html#ss1.12\">System resource settings section of the PCMCIA HOWTO</ulink>. Note that you have to omit the commas, if any, when you enter this value in the installer."
msgstr "A telepítő szakértő módban is indítható. Ekkor lehetőség nyílik a hardver igényeinek megfelelő erőforrás-tartományok bevitelére. Például a fenti Dell laptopokon megadható ez: <userinput>exclude port 0x800-0x8ff</userinput>. Van egy lista is néhány általános erőforrás-tartomány lehetőségről itt: <ulink url=\"http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-1.html#ss1.12\">PCMCIA HOGYAN rendszer erőforrás-beállítások szakasz</ulink>. A vesszőket el kell hagyni, ha vannak, mikor beírod ezt az értéket a telepítőben."

#. Tag: title
#: boot-installer.xml:3654
#, no-c-format
msgid "System Freeze while Loading USB Modules"
msgstr "A rendszer fagyása az USB modulok betöltésekor"

#. Tag: para
#: boot-installer.xml:3655
#, no-c-format
msgid "The kernel normally tries to install USB modules and the USB keyboard driver in order to support some non-standard USB keyboards. However, there are some broken USB systems where the driver hangs on loading. A possible workaround may be disabling the USB controller in your mainboard BIOS setup. Another option is passing the <userinput>debian-installer/probe/usb=false</userinput> parameter at the boot prompt, which will prevent the modules from being loaded."
msgstr "A kernel alapban megpróbálja telepíteni az USB modulokat és az USB billentyű meghajtót pár nem-szabványos USB billentyű támogatásához. De van pár hibás USB rendszer, ahol a meghajtó lefagy betöltéskor. Ennek egyik elkerülése az USB vezérlő kikapcsolása a BIOS beállításban. Egy másik lehetőség a <userinput>debian-installer/probe/usb=false</userinput> paraméter átadása az indító jelnél, mely meggátolja e modulok betöltését."

#. Tag: para
#: boot-installer.xml:3670
#, no-c-format
msgid "There are some common installation problems that are worth mentioning."
msgstr "Van pár fel-felbukkanó telepítő gond, melyet érdemes megemlíteni."

#. Tag: title
#: boot-installer.xml:3676
#, no-c-format
msgid "Misdirected video output"
msgstr ""

#. Tag: para
#: boot-installer.xml:3677
#, no-c-format
msgid ""
"It is fairly common for &arch-title; to have two video cards in one machine, for example an ATI card and a Sun Creator 3D. In some cases, this may result in the video output getting misdirected soon after the system boots. In typical cases, the display will only show: <informalexample><screen>\n"
"Remapping the kernel... done\n"
"Booting Linux...\n"
"</screen></informalexample> To work around this, you can either pull out one of the video cards, or disable the one not used during the OpenProm boot phase using a kernel parameter. For example, to disable an ATI card, you should boot the installer with <userinput>video=atyfb:off</userinput>."
msgstr ""

#. Tag: para
#: boot-installer.xml:3691
#, no-c-format
msgid "Note that you may also have to manually add this parameter to the silo configuration (edit <filename>/target/etc/silo.conf</filename> before rebooting) and, if you installed X11, modify the video driver in <filename>/etc/X11/xorg.conf</filename>."
msgstr "Add e paramétert a silo beállításhoz (szerkeszd a <filename>/target/etc/silo.conf</filename> fájlt újraindítás előtt) és X11 esetén módosítsd a videó meghajtót a <filename>/etc/X11/xorg.conf</filename> fájlban."

#. Tag: title
#: boot-installer.xml:3702
#, no-c-format
msgid "Failure to Boot or Install from CD-ROM"
msgstr "Hibás indítás vagy telepítés CD-ROM lemezről"

#. Tag: para
#: boot-installer.xml:3703
#, no-c-format
msgid "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if they do boot, there may be inexplicable failures during the installation. Most problems have been reported with SunBlade systems."
msgstr "Bizonyos Sparc rendszerekkel állandó CD-ROM indítás gondok vannak, és ha indulnak is, hibákat adnak a telepítéskor. A legtöbb gond a SunBlade rendszereknél fordult elő."

#. Tag: para
#: boot-installer.xml:3709
#, no-c-format
msgid "We recommend to install such systems by netbooting the installer."
msgstr "Az ilyen rendszerekhez hálózati telepítést ajánlunk."

#. Tag: title
#: boot-installer.xml:3718
#, no-c-format
msgid "Interpreting the Kernel Startup Messages"
msgstr "A kernel indító üzenetek értelmezése"

#. Tag: para
#: boot-installer.xml:3720
#, no-c-format
msgid "During the boot sequence, you may see many messages in the form <computeroutput>can't find <replaceable>something</replaceable></computeroutput>, or <computeroutput><replaceable>something</replaceable> not present</computeroutput>, <computeroutput>can't initialize <replaceable>something</replaceable></computeroutput>, or even <computeroutput>this driver release depends on <replaceable>something</replaceable></computeroutput>. Most of these messages are harmless. You see them because the kernel for the installation system is built to run on computers with many different peripheral devices. Obviously, no one computer will have every possible peripheral device, so the operating system may emit a few complaints while it looks for peripherals you don't own. You may also see the system pause for a while. This happens when it is waiting for a device to respond, and that device is not present on your system. If you find the time it takes to boot the system unacceptably long, you can create a custom kernel later (see <xref linkend=\"kernel-baking\"/>)."
msgstr "Az indítás alatt, sok ilyen üzenetet láthatsz: <computeroutput>can't find <replaceable>valami</replaceable></computeroutput>, vagy <computeroutput> <replaceable>valami</replaceable> not present</computeroutput>, <computeroutput>can't initialize <replaceable>valami</replaceable></computeroutput>, vagy akár <computeroutput>this driver release depends on <replaceable>valami</replaceable></computeroutput>. A legtöbb ilyen nem számít. Azért látod, mert a telepítőben lévő kernel úgy készült, hogy a legkülönbözőbb eszközöket támogassa.  Persze egy gépen sincs az összes lehetséges eszköz, és az operációs rendszer jelezheti, ha olyat keres, ami nem található. Néha azt is láthatod, hogy a rendszer egy picit megáll. Ez akkor történik, ha vár egy eszköz válaszára, az adott rendszer pedig nem tartalmaz olyat. Ha ezt túl hosszúnak találod, később egyéni kernelt is készíthetsz (lásd a <xref linkend=\"kernel-baking\"/> részt)."

#. Tag: title
#: boot-installer.xml:3745
#, no-c-format
msgid "Reporting Installation Problems"
msgstr "Telepítő gondok jelentése"

#. Tag: para
#: boot-installer.xml:3746
#, no-c-format
msgid "If you get through the initial boot phase but cannot complete the install, the menu option <guimenuitem>Save debug logs</guimenuitem> may be helpful. It lets you store system error logs and configuration information from the installer to a floppy, or download them using a web browser. This information may provide clues as to what went wrong and how to fix it. If you are submitting a bug report, you may want to attach this information to the bug report."
msgstr "Ha túljutottál a kezdő indító szakaszon, de nem futott le teljesen végig a telepítés, a <guimenuitem>Hibanaplók mentése</guimenuitem> menüpont segíthet. Eltárolhatod a rendszer hiba naplóit és beállításait a telepítőből egy flopira, vagy letöltheted egy böngészőben. Ezek megadják a felmerült hibákat és javításukat. Ha jelentést küldesz, csatolhatod hozzá ezeket."

#. Tag: para
#: boot-installer.xml:3757
#, no-c-format
msgid "Other pertinent installation messages may be found in <filename>/var/log/</filename> during the installation, and <filename>/var/log/installer/</filename> after the computer has been booted into the installed system."
msgstr "További telepítő üzenetek találhatók a <filename>/var/log/</filename> könyvtárban a telepítés során és a <filename>/var/log/installer/</filename> könyvtárban, miután a gép a telepített rendszert elindította."

#. Tag: title
#: boot-installer.xml:3768
#, no-c-format
msgid "Submitting Installation Reports"
msgstr "Telepítő jelentések küldése"

#. Tag: para
#: boot-installer.xml:3769
#, no-c-format
msgid "If you still have problems, please submit an installation report. We also encourage installation reports to be sent even if the installation is successful, so that we can get as much information as possible on the largest number of hardware configurations."
msgstr "Ha még mindig gondjaid vannak, kérjük, küldj telepítő jelentést. Siker esetén is kérünk erre, mert így a lehető legtöbb adatot kapjuk a legtöbb hardver összeállításról."

#. Tag: para
#: boot-installer.xml:3776
#, no-c-format
msgid "Note that your installation report will be published in the Debian Bug Tracking System (BTS) and forwarded to a public mailing list. Make sure that you use an e-mail address that you do not mind being made public."
msgstr "A telepítő jelentés közzé kerül a Debian hibajelentő rendszerben (BTS) és nyilvános listára kerül. Gondold át, melyik email címedet használod."

#. Tag: para
#: boot-installer.xml:3782
#, no-c-format
msgid "If you have a working Debian system, the easiest way to send an installation report is to install the <classname>installation-report</classname> and <classname>reportbug</classname> packages (<command>aptitude install installation-report reportbug</command>), configure <classname>reportbug</classname> as explained in <xref linkend=\"mail-outgoing\"/>, and run the command <command>reportbug installation-reports</command>."
msgstr "Működő Debian rendszerből a telepítő jelentés küldésének legkönnyebb módja az <classname>installation-report</classname> és <classname>reportbug</classname> csomag telepítése (<command>aptitude install installation-report reportbug</command>), állítsd be a <classname>reportbug</classname> csomagot a <xref linkend=\"mail-outgoing\"/> résznek megfelelően és futtasd a <command>reportbug installation-reports</command> parancsot."

#. Tag: para
#: boot-installer.xml:3792
#, no-c-format
msgid ""
"Alternatively you can use this template when filling out installation reports, and file the report as a bug report against the <classname>installation-reports</classname> pseudo package, by sending it to <email>submit@bugs.debian.org</email>. <informalexample><screen>\n"
"Package: installation-reports\n"
"\n"
"Boot method: &lt;How did you boot the installer? CD? floppy? network?&gt;\n"
"Image version: &lt;Full URL to image you downloaded is best&gt;\n"
"Date: &lt;Date and time of the install&gt;\n"
"\n"
"Machine: &lt;Description of machine (eg, IBM Thinkpad R32)&gt;\n"
"Processor:\n"
"Memory:\n"
"Partitions: &lt;df -Tl will do; the raw partition table is preferred&gt;\n"
"\n"
"Output of lspci -nn and lspci -vnn:\n"
"\n"
"Base System Installation Checklist:\n"
"[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n"
"\n"
"Initial boot:           [ ]\n"
"Detect network card:    [ ]\n"
"Configure network:      [ ]\n"
"Detect CD:              [ ]\n"
"Load installer modules: [ ]\n"
"Detect hard drives:     [ ]\n"
"Partition hard drives:  [ ]\n"
"Install base system:    [ ]\n"
"Clock/timezone setup:   [ ]\n"
"User/password setup:    [ ]\n"
"Install tasks:          [ ]\n"
"Install boot loader:    [ ]\n"
"Overall install:        [ ]\n"
"\n"
"Comments/Problems:\n"
"\n"
"&lt;Description of the install, in prose, and any thoughts, comments\n"
"      and ideas you had during the initial install.&gt;\n"
"</screen></informalexample> In the bug report, describe what the problem is, including the last visible kernel messages in the event of a kernel hang. Describe the steps that you did which brought the system into the problem state."
msgstr ""
"Vagy pedig használhatod e sablont a telepítő jelentés kitöltésére és elküldésére hibajegyként az <classname>installation-reports</classname> ál- csomagra a <email>submit@bugs.debian.org</email> címre küldve angolul. <informalexample><screen>\n"
"Package: installation-reports\n"
"\n"
"Boot method: &lt;Mi volt az indító médium? CD? flopi? hálózat?&gt;\n"
"Image version: &lt;A letöltött kép teljes URL-e a legjobb&gt;\n"
"Date: &lt;Telepítés időpontja&gt;\n"
"\n"
"Machine: &lt;Gép leírása (például IBM Thinkpad R32)&gt;\n"
"Processor:\n"
"Memory:\n"
"Partitions: &lt;a df -Tl kiírja; a sima partíciós tábla ajánlott&gt;\n"
"\n"
"Az lspci -nn és lspci -vnn kimenete:\n"
"\n"
"Az alaprendszer telepítésekor:\n"
"[O] = OK, [E] = Hiba (a végén írd le), [ ] = nem próbált\n"
"\n"
"Initial boot:    [ ]\n"
"Detect network card:    [ ]\n"
"Configure network:   [ ]\n"
"Detect CD:              [ ]\n"
"Load installer modules: [ ]\n"
"Detect hard drives:     [ ]\n"
"Partition hard drives:  [ ]\n"
"Install base system:    [ ]\n"
"Clock/timezone setup:   [ ]\n"
"User/password setup:    [ ]\n"
"Install tasks:          [ ]\n"
"Install boot loader:    [ ]\n"
"Overall install:        [ ]\n"
"\n"
"Comments/Problems:\n"
"\n"
"&lt;Telepítés leírása prózaian és bármilyen gondolat, megjegyzés\n"
"      és ötlet a kezdeti telepítés során.&gt;\n"
"</screen></informalexample> A jelentésben írd le az esetleges hibát, ha a kernel leállna, annak utolsó látható üzeneteit is. Írd le, mely lépések okozták a gondot."

#~ msgid ""
#~ "Type <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot xxxx -flags 0\n"
#~ "</screen></informalexample> where <replaceable>xxxx</replaceable> is your "
#~ "CD-ROM drive in SRM notation."
#~ msgstr ""
#~ "Írd be ezt: <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot xxxx -flags 0\n"
#~ "</screen></informalexample> ahol az <replaceable>xxxx</replaceable> a CD-"
#~ "ROM meghajtó SRM szerint."
#~ msgid "If you are using a 2.2.x kernel, you may need to set &ramdisksize;."
#~ msgstr "2.2.x kernel esetén a &ramdisksize; beállítandó."
#~ msgid ""
#~ "If you are booting with your own kernel instead of the one supplied with "
#~ "the installer, be sure that <userinput>CONFIG_DEVFS</userinput> is set in "
#~ "your kernel. The installer requires <userinput>CONFIG_DEVFS</userinput>."
#~ msgstr ""
#~ "Ha a telepítő által adott helyett saját kernelt indítasz, fontos, hogy a "
#~ "<userinput>CONFIG_DEVFS</userinput> be legyen állítva a kernelben. A "
#~ "telepítő a <userinput>CONFIG_DEVFS</userinput> meglétét igényli."
#~ msgid "Bug Reporter"
#~ msgstr "Hibajelentő"