# Debian Installation Guide random-bits
# Tapio Lehtonen <tale@debian.org>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: Debian Installation Guide random-bits\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2007-01-07 13:24+0000\n"
"PO-Revision-Date: 2006-12-15 17:24+0200\n"
"Last-Translator: Tapio Lehtonen <tale@debian.org>\n"
"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#: random-bits.xml:4
#, no-c-format
msgid "Random Bits"
msgstr "Sekalaista"

#. Tag: title
#: random-bits.xml:11
#, no-c-format
msgid "Linux Devices"
msgstr "Linuxin laitetiedostot"

#. Tag: para
#: random-bits.xml:12
#, no-c-format
msgid ""
"In Linux various special files can be found under the directory <filename>/"
"dev</filename>. These files are called device files and behave unlike "
"ordinary files. The most common types of device files are for block devices "
"and character devices. These files are an interface to the actual driver "
"(part of the Linux kernel) which in turn accesses the hardware. Another, "
"less common, type of device file is the named <firstterm>pipe</firstterm>. "
"The most important device files are listed in the tables below."
msgstr ""
"Hakemistosta <filename>/dev</filename> löytyy Linuxissa erilaisia "
"erikoistiedostoja. Nämä tiedostot ovat laitetiedostoja ja ne käyttäytyvät "
"eri tavalla kuin tavalliset tiedostot. Tavallisimmat laitetiedostojen tyypit "
"ovat lohkolaitteille ja merkkilaitteille. Nämä tiedostot toimivat "
"rajapintana varsinaiseen laiteajuriin (joka on Linux-ytimessä), joka "
"puolestaan keskustelee laitteen kanssa. Toinen harvinaisempi laitetiedosto "
"on nimetty <firstterm>putki</firstterm>. Tärkeimmät laitetiedostojen tyypit "
"luetellaan alla olevassa taulukoissa."

#. Tag: filename
#: random-bits.xml:27
#, no-c-format
msgid "<filename>fd0</filename>"
msgstr "<filename>fd0</filename>"

#. Tag: entry
#: random-bits.xml:28
#, no-c-format
msgid "First Floppy Drive"
msgstr "Ensimmäinen levykeasema"

#. Tag: filename
#: random-bits.xml:30
#, no-c-format
msgid "<filename>fd1</filename>"
msgstr "<filename>fd1</filename>"

#. Tag: entry
#: random-bits.xml:31
#, no-c-format
msgid "Second Floppy Drive"
msgstr "Toinen levykeasema"

#. Tag: filename
#: random-bits.xml:37
#, no-c-format
msgid "<filename>hda</filename>"
msgstr "<filename>hda</filename>"

#. Tag: entry
#: random-bits.xml:38
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the first IDE port (Master)"
msgstr "IDE kiintolevy / romppuasema ensisijaisessa IDE-väylässä (Isäntä)"

#. Tag: filename
#: random-bits.xml:40
#, no-c-format
msgid "<filename>hdb</filename>"
msgstr "<filename>hdb</filename>"

#. Tag: entry
#: random-bits.xml:41
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the first IDE port (Slave)"
msgstr "IDE kiintolevy / romppuasema ensisijaisessa IDE-väylässä (orja)"

#. Tag: filename
#: random-bits.xml:43
#, no-c-format
msgid "<filename>hdc</filename>"
msgstr "<filename>hdc</filename>"

#. Tag: entry
#: random-bits.xml:44
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the second IDE port (Master)"
msgstr "IDE kiintolevy / romppuasema toisessa IDE-väylässä (isäntä)"

#. Tag: filename
#: random-bits.xml:46
#, no-c-format
msgid "<filename>hdd</filename>"
msgstr "<filename>hdd</filename>"

#. Tag: entry
#: random-bits.xml:47
#, no-c-format
msgid "IDE Hard disk / CD-ROM on the second IDE port (Slave)"
msgstr "IDE kiintolevy / romppuasema toisessa IDE-väylässä (orja)"

#. Tag: filename
#: random-bits.xml:49
#, no-c-format
msgid "hda1"
msgstr "hda1"

#. Tag: entry
#: random-bits.xml:50
#, no-c-format
msgid "First partition of the first IDE hard disk"
msgstr "Ensimmäisen IDE-kiintolevyn ensimmäinen osio"

#. Tag: filename
#: random-bits.xml:52
#, no-c-format
msgid "hdd15"
msgstr "hdd15"

#. Tag: entry
#: random-bits.xml:53
#, no-c-format
msgid "Fifteenth partition of the fourth IDE hard disk"
msgstr "Neljännen IDE-kiintolevyn viidestoista osio"

#. Tag: filename
#: random-bits.xml:59
#, no-c-format
msgid "<filename>sda</filename>"
msgstr "<filename>sda</filename>"

#. Tag: entry
#: random-bits.xml:60
#, no-c-format
msgid "SCSI Hard disk with lowest SCSI ID (e.g. 0)"
msgstr "SCSI-kiintolevy jolla pienin SCSI ID (alkaa nollasta)"

#. Tag: filename
#: random-bits.xml:62
#, no-c-format
msgid "<filename>sdb</filename>"
msgstr "<filename>sdb</filename>"

#. Tag: entry
#: random-bits.xml:63
#, no-c-format
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 1)"
msgstr "SCSI-kiintolevy jolla seuraavaksi pienin SCSI ID (esim. 1)"

#. Tag: filename
#: random-bits.xml:65
#, no-c-format
msgid "<filename>sdc</filename>"
msgstr "<filename>sdc</filename>"

#. Tag: entry
#: random-bits.xml:66
#, no-c-format
msgid "SCSI Hard disk with next higher SCSI ID (e.g. 2)"
msgstr "SCSI-kiintolevy jolla seuraavaksi suurempi SCSI ID (esim. 2)"

#. Tag: filename
#: random-bits.xml:68
#, no-c-format
msgid "sda1"
msgstr "sda1"

#. Tag: entry
#: random-bits.xml:69
#, no-c-format
msgid "First partition of the first SCSI hard disk"
msgstr "Ensimmäisen SCSI-kiintolevyn ensimmäinen osio"

#. Tag: filename
#: random-bits.xml:71
#, no-c-format
msgid "sdd10"
msgstr "sdd10"

#. Tag: entry
#: random-bits.xml:72
#, no-c-format
msgid "Tenth partition of the fourth SCSI hard disk"
msgstr "Neljännen SCSI-kiintolevyn kymmenes osio"

#. Tag: filename
#: random-bits.xml:78
#, no-c-format
msgid "<filename>sr0</filename>"
msgstr "<filename>sr0</filename>"

#. Tag: entry
#: random-bits.xml:79
#, no-c-format
msgid "SCSI CD-ROM with the lowest SCSI ID"
msgstr "SCSI-romppuasema jolla pienin SCSI ID"

#. Tag: filename
#: random-bits.xml:81
#, no-c-format
msgid "<filename>sr1</filename>"
msgstr "<filename>sr1</filename>"

#. Tag: entry
#: random-bits.xml:82
#, no-c-format
msgid "SCSI CD-ROM with the next higher SCSI ID"
msgstr "SCSI-romppuasema jolla toiseksi pienin SCSI ID"

#. Tag: filename
#: random-bits.xml:88
#, no-c-format
msgid "ttyS0"
msgstr "ttyS0"

#. Tag: entry
#: random-bits.xml:89
#, no-c-format
msgid "Serial port 0, COM1 under MS-DOS"
msgstr "Sarjaportti 0, MS-DOS:ssa COM1"

#. Tag: filename
#: random-bits.xml:91
#, no-c-format
msgid "ttyS1"
msgstr "ttyS1"

#. Tag: entry
#: random-bits.xml:92
#, no-c-format
msgid "Serial port 1, COM2 under MS-DOS"
msgstr "Sarjaportti 1, MS-DOS:ssa COM2"

#. Tag: filename
#: random-bits.xml:94
#, no-c-format
msgid "psaux"
msgstr "psaux"

#. Tag: entry
#: random-bits.xml:95
#, no-c-format
msgid "PS/2 mouse device"
msgstr "PS/2 hiiriportti"

#. Tag: filename
#: random-bits.xml:97
#, no-c-format
msgid "gpmdata"
msgstr "gpmdata"

#. Tag: entry
#: random-bits.xml:98
#, no-c-format
msgid "Pseudo device, repeater data from GPM (mouse) daemon"
msgstr "Näennäislaite, GPM-demonin (hiiri) toistin"

#. Tag: filename
#: random-bits.xml:104
#, no-c-format
msgid "cdrom"
msgstr "cdrom"

#. Tag: entry
#: random-bits.xml:105
#, no-c-format
msgid "Symbolic link to the CD-ROM drive"
msgstr "Symbolinen linkki romppuasemaan"

#. Tag: filename
#: random-bits.xml:107
#, no-c-format
msgid "mouse"
msgstr "mouse"

#. Tag: entry
#: random-bits.xml:108
#, no-c-format
msgid "Symbolic link to the mouse device file"
msgstr "Symbolinen linkki hiiren laitetiedostoon"

#. Tag: filename
#: random-bits.xml:114
#, no-c-format
msgid "null"
msgstr "null"

#. Tag: entry
#: random-bits.xml:115
#, no-c-format
msgid "Anything written to this device will disappear"
msgstr "Kaikki tälle laitteelle kirjoitettu katoaa"

#. Tag: filename
#: random-bits.xml:117
#, no-c-format
msgid "zero"
msgstr "zero"

#. Tag: entry
#: random-bits.xml:118
#, no-c-format
msgid "One can endlessly read zeros out of this device"
msgstr "Tältä laitteelta voi lukea nollia loputtomasti"

#. Tag: title
#: random-bits.xml:125
#, no-c-format
msgid "Setting Up Your Mouse"
msgstr "Hiiren asetukset"

#. Tag: para
#: random-bits.xml:127
#, no-c-format
msgid ""
"The mouse can be used in both the Linux console (with gpm) and the X window "
"environment. The two uses can be made compatible if the gpm repeater is used "
"to allow the signal to flow to the X server as shown: "
"<informalexample><screen>\n"
"mouse =&gt; /dev/psaux  =&gt; gpm =&gt; /dev/gpmdata -&gt; /dev/mouse =&gt; "
"X\n"
"         /dev/ttyS0             (repeater)        (symlink)\n"
"         /dev/ttyS1\n"
"</screen></informalexample> Set the repeater protocol to be raw (in "
"<filename>/etc/gpm.conf</filename>) while setting X to the original mouse "
"protocol in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/"
"XF86Config-4</filename>."
msgstr ""
"Hiirtä voidaan käyttää sekä Linuxin konsolilla (gpm:n avulla) että X Window -"
"ympäristössä. Nämä kaksi käyttötapaa saadaan toimimaan yhdessä käyttämällä "
"gpm:ää toistimena välittämään signaalit X-palvelimelle tähän tapaan: "
"<informalexample><screen>\n"
"mouse =&gt; /dev/psaux  =&gt; gpm =&gt; /dev/gpmdata -&gt; /dev/mouse =&gt; "
"X\n"
"         /dev/ttyS0             (toistin)      (symbolinen\n"
"         /dev/ttyS1                              linkki)\n"
"</screen></informalexample> Toistimen yhteyskäytännöksi asetetaan raw "
"(tiedostossa <filename>/etc/gpm.conf</filename>) ja X säädetään käyttämään "
"hiiren alkuperäistä yhteyskäytäntöä (tiedostossa <filename>/etc/X11/"
"XF86Config</filename> tai <filename>/etc/X11/XF86Config-4</filename>."

#. Tag: para
#: random-bits.xml:139
#, no-c-format
msgid ""
"This approach to use gpm even in X has advantages when the mouse is "
"unplugged inadvertently. Simply restarting gpm with "
"<informalexample><screen>\n"
"# /etc/init.d/gpm restart\n"
"</screen></informalexample> will re-connect the mouse in software without "
"restarting X."
msgstr ""
"Tästä tavasta käyttää gpm:ää myös X:ssä on hyötyä kun hiiri irrotetaan "
"vahingossa. Riittää käynnistää gpm uudelleen komennolla "
"<informalexample><screen>\n"
"# /etc/init.d/gpm restart\n"
"</screen></informalexample> jotta hiiri saadaan uudestaan toimimaan eikä "
"tarvitse käynnistää X:ää uudelleen."

#. Tag: para
#: random-bits.xml:148
#, no-c-format
msgid ""
"If gpm is disabled or not installed for some reason, make sure to set X to "
"read directly from a mouse device such as /dev/psaux. For details, refer to "
"the 3-Button Mouse mini-Howto at <filename>/usr/share/doc/HOWTO/en-txt/"
"mini/3-Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, "
"<filename>/usr/share/doc/gpm/FAQ.gz</filename>, and <ulink url=\"&url-xorg;"
"current/doc/html/mouse.html\">README.mouse</ulink>."
msgstr ""
"Mikäli gpm on pois käytöstä tai sitä ei jostain syystä ole asennettu, pitää "
"varmistua että X käyttää suoraan hiiren laitetiedostoa, esimerkiksi "
"<filename>/dev/psaux</filename>. Tarkempaa tietoa löytyy ohjeista 3-Button "
"Mouse mini-Howto tiedostossa <filename>/usr/share/doc/HOWTO/en-txt/mini/3-"
"Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, <filename>/usr/"
"share/doc/gpm/FAQ.gz</filename> ja <ulink url=\"&url-xorg;current/doc/html/"
"mouse.html\">README.mouse</ulink>."

#. Tag: para
#: random-bits.xml:158
#, no-c-format
msgid ""
"For PowerPC, in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/"
"X11/XF86Config-4</filename>, set the mouse device to <userinput>\"/dev/input/"
"mice\"</userinput>."
msgstr ""
"Jos tietokone on PowerPC, asetetaan tiedostossa <filename>/etc/X11/"
"XF86Config</filename> tai <filename>/etc/X11/XF86Config-4</filename> "
"hiirilaitteeksi <userinput>\"/dev/input/mice\"</userinput>."

#. Tag: para
#: random-bits.xml:164
#, no-c-format
msgid ""
"Modern kernels give you the capability to emulate a three-button mouse when "
"your mouse only has one button. Just add the following lines to <filename>/"
"etc/sysctl.conf</filename> file."
msgstr ""
"Uudet ytimet mahdollistavat kolmipainikkeisen hiiren emuloinnin vaikka "
"hiiressä olisi vain yksi painike. Riittää lisätä seuraavat rivit tiedostoon "
"<filename>/etc/sysctl.conf</filename>."

#. Tag: screen
#: random-bits.xml:170
#, no-c-format
msgid ""
"# 3-button mouse emulation\n"
"# turn on emulation\n"
"/dev/mac_hid/mouse_button_emulation = 1\n"
"# Send middle mouse button signal with the F11 key\n"
"/dev/mac_hid/mouse_button2_keycode = 87\n"
"# Send right mouse button signal with the F12 key\n"
"/dev/mac_hid/mouse_button3_keycode = 88\n"
"# For different keys, use showkey to tell you what the code is."
msgstr ""
"# 3-painikkeisen hiiren emulointi\n"
"# emulointi päälle\n"
"/dev/mac_hid/mouse_button_emulation = 1\n"
"# Lähetä hiiren keskimmäisen painikkeen signaali näppäimellä F11\n"
"/dev/mac_hid/mouse_button2_keycode = 87\n"
"# Lähetä hiiren oikeanpuoleisen painikkeen signaali näppäimellä F12\n"
"/dev/mac_hid/mouse_button3_keycode = 88\n"
"# Muut näppäimet: komento showkey näyttää näppäimen koodin."

#. Tag: title
#: random-bits.xml:177
#, no-c-format
msgid "Disk Space Needed for Tasks"
msgstr "Tehtävien vaatima levytila"

#. Tag: para
#: random-bits.xml:194
#, fuzzy, no-c-format
msgid ""
"A standard installation for the i386 architecture, including all standard "
"packages and using the default 2.6 kernel, takes up 442MB of disk space. A "
"minimal base installation, without the <quote>Standard system</quote> task "
"selected, will take 230MB."
msgstr ""
"Peruskokoonpanon asennus ja kaikki vakiopaketit i386-arkkitehtuurilla "
"oletusarvona olevaa 2.6-ydintä käyttäen vie 585 Mt levytilaa. Suppea "
"perusasennus vie 365 Mt, jos standard-tehtävää ei valita."

#. Tag: para
#: random-bits.xml:202
#, no-c-format
msgid ""
"In both cases this is the actual disk space used <emphasis>after</emphasis> "
"the installation is finished and any temporary files deleted. It also does "
"not take into account overhead used by the file system, for example for "
"journal files. This means that significantly more disk space is needed both "
"<emphasis>during</emphasis> the installation and for normal system use."
msgstr ""

#. Tag: para
#: random-bits.xml:211
#, no-c-format
msgid ""
"The following table lists sizes reported by aptitude for the tasks listed in "
"tasksel. Note that some tasks have overlapping constituents, so the total "
"installed size for two tasks together may be less than the total obtained by "
"adding up the numbers."
msgstr ""
"Seuraavassa taulukossa luetellaan aptituden ilmoittamat koot taskselin "
"tuntemille tehtäville. Huomaa joillakin tehtävillä olevan yhteisiä osia, "
"joten kahden tehtävän yhteensä kuluttama levytila voi olla vähemmän kuin "
"niiden kokojen summa."

#. Tag: para
#: random-bits.xml:218
#, fuzzy, no-c-format
msgid ""
"Note that you will need to add the sizes listed in the table to the size of "
"the standard installation when determining the size of partitions. Most of "
"the size listed as <quote>Installed size</quote> will end up in <filename>/"
"usr</filename> and in <filename>/lib</filename>; the size listed as "
"<quote>Download size</quote> is (temporarily) required in <filename>/var</"
"filename>."
msgstr ""
"Huomaa, että taulukossa lueteltuihin kokoihin on lisättävä peruskokoonpanon "
"vaatima tila laskettaessa levyosion kokoa. Valtaosa sarakkeessa <quote>Koko "
"purettuna</quote> olevasta tilasta kuluu hakemistosta <filename>/usr</"
"filename>; sarakkeessa <quote>Koko pakattuna</quote> mainittu tila tarvitaan "
"(tilapäisesti) hakemistosta <filename>/var</filename>."

#. Tag: entry
#: random-bits.xml:232
#, no-c-format
msgid "Task"
msgstr "Tehtävä"

#. Tag: entry
#: random-bits.xml:233
#, no-c-format
msgid "Installed size (MB)"
msgstr "Koko purettuna (Mt)"

#. Tag: entry
#: random-bits.xml:234
#, no-c-format
msgid "Download size (MB)"
msgstr "Koko pakattuna (Mt)"

#. Tag: entry
#: random-bits.xml:235
#, no-c-format
msgid "Space needed to install (MB)"
msgstr "Asennuksen aikana tarvittava tila (Mt)"

#. Tag: entry
#: random-bits.xml:241
#, no-c-format
msgid "Desktop environment"
msgstr ""

#. Tag: entry
#: random-bits.xml:242
#, fuzzy, no-c-format
msgid "1267"
msgstr "1676"

#. Tag: entry
#: random-bits.xml:243
#, fuzzy, no-c-format
msgid "<entry>420</entry>"
msgstr "<entry>421</entry>"

#. Tag: entry
#: random-bits.xml:244
#, fuzzy, no-c-format
msgid "1667"
msgstr "1676"

#. Tag: entry
#: random-bits.xml:248
#, no-c-format
msgid "Laptop"
msgstr "Läppäri"

#. Tag: para
#: random-bits.xml:250
#, no-c-format
msgid ""
"There is a large overlap of the Laptop task with the Destop environment "
"task. If you install both, the Laptop task will only require a few MB "
"additional disk space."
msgstr ""

#. Tag: entry
#: random-bits.xml:257
#, no-c-format
msgid "<entry>50</entry>"
msgstr "<entry>50</entry>"

#. Tag: entry
#: random-bits.xml:258
#, fuzzy, no-c-format
msgid "<entry>17</entry>"
msgstr "<entry>1</entry>"

#. Tag: entry
#: random-bits.xml:259
#, fuzzy, no-c-format
msgid "<entry>67</entry>"
msgstr "<entry>46</entry>"

#. Tag: entry
#: random-bits.xml:263
#, no-c-format
msgid "Web server"
msgstr "Web server"

#. Tag: entry
#: random-bits.xml:264
#, no-c-format
msgid "<entry>35</entry>"
msgstr "<entry>35</entry>"

#. Tag: entry
#: random-bits.xml:265
#, no-c-format
msgid "<entry>11</entry>"
msgstr "<entry>11</entry>"

#. Tag: entry
#: random-bits.xml:266
#, no-c-format
msgid "<entry>46</entry>"
msgstr "<entry>46</entry>"

#. Tag: entry
#: random-bits.xml:270
#, no-c-format
msgid "Print server"
msgstr "Print server"

#. Tag: entry
#: random-bits.xml:271
#, fuzzy, no-c-format
msgid "<entry>277</entry>"
msgstr "<entry>2</entry>"

#. Tag: entry
#: random-bits.xml:272
#, fuzzy, no-c-format
msgid "<entry>79</entry>"
msgstr "<entry>95</entry>"

#. Tag: entry
#: random-bits.xml:273
#, fuzzy, no-c-format
msgid "<entry>356</entry>"
msgstr "<entry>35</entry>"

#. Tag: entry
#: random-bits.xml:277
#, no-c-format
msgid "DNS server"
msgstr "DNS server"

#. Tag: entry
#: random-bits.xml:278
#, no-c-format
msgid "<entry>2</entry>"
msgstr "<entry>2</entry>"

#. Tag: entry
#: random-bits.xml:279
#, no-c-format
msgid "<entry>1</entry>"
msgstr "<entry>1</entry>"

#. Tag: entry
#: random-bits.xml:280
#, no-c-format
msgid "<entry>3</entry>"
msgstr "<entry>3</entry>"

#. Tag: entry
#: random-bits.xml:284
#, no-c-format
msgid "File server"
msgstr "File server"

#. Tag: entry
#: random-bits.xml:285
#, fuzzy, no-c-format
msgid "<entry>49</entry>"
msgstr "<entry>46</entry>"

#. Tag: entry
#: random-bits.xml:286
#, no-c-format
msgid "<entry>21</entry>"
msgstr "<entry>21</entry>"

#. Tag: entry
#: random-bits.xml:287
#, fuzzy, no-c-format
msgid "<entry>70</entry>"
msgstr "<entry>50</entry>"

#. Tag: entry
#: random-bits.xml:291
#, no-c-format
msgid "Mail server"
msgstr "Mail server"

#. Tag: entry
#: random-bits.xml:292
#, no-c-format
msgid "<entry>13</entry>"
msgstr "<entry>13</entry>"

#. Tag: entry
#: random-bits.xml:293
#, no-c-format
msgid "<entry>5</entry>"
msgstr "<entry>5</entry>"

#. Tag: entry
#: random-bits.xml:294
#, no-c-format
msgid "<entry>18</entry>"
msgstr "<entry>18</entry>"

#. Tag: entry
#: random-bits.xml:298
#, no-c-format
msgid "SQL database"
msgstr "SQL database"

#. Tag: entry
#: random-bits.xml:299
#, no-c-format
msgid "<entry>24</entry>"
msgstr "<entry>24</entry>"

#. Tag: entry
#: random-bits.xml:300
#, no-c-format
msgid "<entry>8</entry>"
msgstr "<entry>8</entry>"

#. Tag: entry
#: random-bits.xml:301
#, no-c-format
msgid "<entry>32</entry>"
msgstr "<entry>32</entry>"

#. Tag: para
#: random-bits.xml:307
#, no-c-format
msgid ""
"The <emphasis>Desktop</emphasis> task will install the GNOME desktop "
"environment."
msgstr ""
"Tehtävä <emphasis>Desktop</emphasis> asentaa sekä GNOME-työpöytäympäristön."

#. Tag: para
#: random-bits.xml:314
#, fuzzy, no-c-format
msgid ""
"If you install in a language other than English, <command>tasksel</command> "
"may automatically install a <firstterm>localization task</firstterm>, if one "
"is available for your language. Space requirements differ per language; you "
"should allow up to 350MB in total for download and installation."
msgstr ""
"Jos asennuskieli on joku muu kuin englanti, <command>tasksel</command> "
"saattaa asentaa automaattisesti <firstterm>kotoistustehtävän</firstterm>, "
"jos sellainen on asennuskielelle saatavissa. Tilavaatimus riippuu kielestä; "
"olisi varauduttava aina 200 Mt kokonaistilaan noudossa ja asennuksessa."

#. Tag: title
#: random-bits.xml:329
#, no-c-format
msgid "Installing &debian; from a Unix/Linux System"
msgstr "&debian;in asentaminen Unix/Linux-järjestelmästä."

#. Tag: para
#: random-bits.xml:331
#, no-c-format
msgid ""
"This section explains how to install &debian; from an existing Unix or Linux "
"system, without using the menu-driven installer as explained in the rest of "
"the manual. This <quote>cross-install</quote> HOWTO has been requested by "
"users switching to &debian; from Red Hat, Mandrake, and SUSE. In this "
"section some familiarity with entering *nix commands and navigating the file "
"system is assumed. In this section, <prompt>$</prompt> symbolizes a command "
"to be entered in the user's current system, while <prompt>#</prompt> refers "
"to a command entered in the Debian chroot."
msgstr ""
"Tämä luku selittää miten &debian; asennetaan koneessa jo olevasta Unix- tai "
"Linux-järjestelmästä käyttämättä valikkopohjaista asenninta josta muut osat "
"tätä ohjetta kertovat. Tämä ohjetta <quote>ristiinasennuksesta</quote> ovat "
"pyytäneet käyttäjät jotka vaihtavat &debian;iin järjestelmistä Red Hat, "
"Mandrake ja SUSE. Tässä luvussa edellytetään jonkinlaista kokemusta *nix-"
"komennoista ja tiedostojärjestelmässä liikkumisesta. Tässä luvussa <prompt>"
"$</prompt> tarkoittaa komentoa joka kirjoitetaan koneessa jo olevassa "
"käyttöjärjestelmässä, ja <prompt>#</prompt> tarkoittaa chroot-eristetyssä "
"Debianissa kirjoitettavaa komentoa."

#. Tag: para
#: random-bits.xml:343
#, no-c-format
msgid ""
"Once you've got the new Debian system configured to your preference, you can "
"migrate your existing user data (if any) to it, and keep on rolling. This is "
"therefore a <quote>zero downtime</quote> &debian; install. It's also a "
"clever way for dealing with hardware that otherwise doesn't play friendly "
"with various boot or installation media."
msgstr ""
"Kun uuden Debian-järjestelmän asetukset on saatu mieleisiksi, voidaan vanhan "
"järjestelmän käyttäjien tiedot (jos niitä on) siirtää ja jatkaa koneen "
"käyttöä. Kyseessä on siis &debian; asennus <quote>ilman alhaallaoloaikaa</"
"quote>. Tämä on myös näppärä keino jos laitteiston kanssa on vaikeuksia "
"käynnistys- ja asennustaltioiden kanssa."

#. Tag: title
#: random-bits.xml:355
#, no-c-format
msgid "Getting Started"
msgstr "Alkuunpääsy"

#. Tag: para
#: random-bits.xml:356
#, fuzzy, no-c-format
msgid ""
"With your current *nix partitioning tools, repartition the hard drive as "
"needed, creating at least one filesystem plus swap. You need around 350MB of "
"space available for a console only install, or about 1GB if you plan to "
"install X (more if you intend to install desktop environments like GNOME or "
"KDE)."
msgstr ""
"Koneessa jo olevan *unix-järjestelmän osiontityökaluilla osioidaan "
"tarvittaessa kiintolevy. On tehtävä ainakin yksi tiedostojärjestelmä ja "
"sivutustila. Tarvitaan ainakin 150 Mt pelkästään konsolilta tehtävälle "
"asennukselle, tai ainakin 300 Mt jos asennetaan X."

#. Tag: para
#: random-bits.xml:364
#, fuzzy, no-c-format
msgid ""
"Next, create file systems on the partitions. For example, to create an ext3 "
"file system on partition <filename>/dev/hda6</filename> (that's our example "
"root partition): <informalexample><screen>\n"
"# mke2fs -j /dev/<replaceable>hda6</replaceable>\n"
"</screen></informalexample> To create an ext2 file system instead, omit "
"<userinput>-j</userinput>."
msgstr ""
"Osioille on luotava tiedostojärjestelmät. Esimerkiksi jos tehdään ext3-"
"tiedostojärjestelmä osioon <filename>/dev/hda6</filename> (se on esimerkin "
"juuriosio): <informalexample><screen>\n"
"# mke2fs -j /dev/hda6\n"
"</screen></informalexample> Jos halutaankin ext2-tiedostojärjestelmä, "
"jätetään <userinput>-j</userinput> pois."

#. Tag: para
#: random-bits.xml:374
#, fuzzy, no-c-format
msgid ""
"Initialize and activate swap (substitute the partition number for your "
"intended Debian swap partition): <informalexample><screen>\n"
"# mkswap /dev/<replaceable>hda5</replaceable>\n"
"# sync; sync; sync\n"
"# swapon /dev/<replaceable>hda5</replaceable>\n"
"</screen></informalexample> Mount one partition as <filename>/mnt/debinst</"
"filename> (the installation point, to be the root (<filename>/</filename>) "
"filesystem on your new system). The mount point name is strictly arbitrary, "
"it is referenced later below."
msgstr ""
"Alustetaan sivutus ja otetaan se käyttöön (korvaa osion numero halutulla "
"Debianin sivutusosiolla): <informalexample><screen>\n"
"# mkswap /dev/hda5\n"
"# sync; sync; sync\n"
"# swapon /dev/hda5\n"
"</screen></informalexample> Yksi osio on liitettävä kohtaan <filename>/mnt/"
"debinst</filename> (asennus tehdään tähän, siitä tulee uuden järjestelmän "
"juuritiedostojärjestelmä (<filename>/</filename>)). Liitoskohta voi olla "
"mikä tahansa hakemisto, mutta nimeä käytetään myöhemmin."

#. Tag: screen
#: random-bits.xml:386
#, fuzzy, no-c-format
msgid ""
"# mkdir /mnt/debinst\n"
"# mount /dev/<replaceable>hda6</replaceable> /mnt/debinst"
msgstr ""
"# mkdir /mnt/debinst\n"
"# mount /dev/hda6 /mnt/debinst"

#. Tag: para
#: random-bits.xml:389
#, no-c-format
msgid ""
"If you want to have parts of the filesystem (e.g. /usr) mounted on separate "
"partitions, you will need to create and mount these directories manually "
"before proceding with the next stage."
msgstr ""
"Jos osa tiedostojärjestelmästä (esim. /usr) halutaan omiin levyosioihinsa, "
"on nämä osiot tehtävä ja liitettävä itse ennen kuin jatketaan seuraavaan "
"kohtaan."

#. Tag: title
#: random-bits.xml:399
#, no-c-format
msgid "Install <command>debootstrap</command>"
msgstr "Asennetaan <command>debootstrap</command>"

#. Tag: para
#: random-bits.xml:400
#, no-c-format
msgid ""
"The utility used by the Debian installer, and recognized as the official way "
"to install a Debian base system, is <command>debootstrap</command>. It uses "
"<command>wget</command> and <command>ar</command>, but otherwise depends "
"only on <classname>/bin/sh</classname> and basic Unix/Linux tools<footnote> "
"<para> These include the GNU core utilities and commands like <command>sed</"
"command>, <command>grep</command>, <command>tar</command> and <command>gzip</"
"command>. </para> </footnote>. Install <command>wget</command> and "
"<command>ar</command> if they aren't already on your current system, then "
"download and install <command>debootstrap</command>."
msgstr ""
"Debianin asentimen käyttämä työkaluohjelma on <command>debootstrap</"
"command>. Se on virallinen tapa Debianin peruskokoonpanon asentamiseen. Se "
"käyttää komentoja <command>wget</command> ja <command>ar</command>, mutta on "
"muuten riippuvainen ainoastaan <classname>/bin/sh</classname>:sta ja Unixin/"
"Linuxin perusohjelmista<footnote> <para> Näitä ovat GNU:n perustyökalut ja "
"komennot kuten <command>sed</command>, <command>grep</command>, "
"<command>tar</command> ja <command>gzip</command>. </para> </footnote>. "
"Asenna <command>wget</command> ja <command>ar</command> jos niitä ei vielä "
"nykyjärjestelmässä ole, ja nouda ja asenna sitten <command>debootstrap</"
"command>."

#. Tag: para
#: random-bits.xml:430
#, no-c-format
msgid ""
"Or, you can use the following procedure to install it manually. Make a work "
"folder for extracting the .deb into: <informalexample><screen>\n"
"# mkdir work\n"
"# cd work\n"
"</screen></informalexample> The <command>debootstrap</command> binary is "
"located in the Debian archive (be sure to select the proper file for your "
"architecture). Download the <command>debootstrap</command> .deb from the "
"<ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</"
"ulink>, copy the package to the work folder, and extract the files from it. "
"You will need to have root privileges to install the files."
msgstr ""
"Tai voidaan käyttää seuraavaa menettelyä ja asentaa se itse. Tee "
"työhakemisto johon .deb puretaan: <informalexample><screen>\n"
"# mkdir work\n"
"# cd work\n"
"</screen></informalexample> Komennon <command>debootstrap</command> "
"suoritettava ohjelmatiedosto on Debianin asennuspalvelimella (muista valita "
"oikea tiedosto koneen suoritinperheelle). Nouda <command>debootstrap</"
"command> .deb <ulink url=\"http://ftp.debian.org/debian/pool/main/d/"
"debootstrap/\"> varastoalueelta</ulink>, kopioi paketti työhakemistoon ja "
"pura siitä suorituskelpoiset ohjelmatiedostot, joiden asentamiseen tarvitaan "
"pääkäyttäjän oikeuksia."

#. Tag: screen
#: random-bits.xml:445
#, no-c-format
msgid ""
"# ar -x debootstrap_0.X.X_all.deb\n"
"# cd /\n"
"# zcat /full-path-to-work/work/data.tar.gz | tar xv"
msgstr ""
"# ar -x debootstrap_0.X.X_arch.deb\n"
"# cd /\n"
"# zcat /kokonainen-polkunimi/work/data.tar.gz | tar xv"

#. Tag: title
#: random-bits.xml:451
#, no-c-format
msgid "Run <command>debootstrap</command>"
msgstr "Suoritetaan <command>debootstrap</command>"

#. Tag: para
#: random-bits.xml:452
#, no-c-format
msgid ""
"<command>debootstrap</command> can download the needed files directly from "
"the archive when you run it. You can substitute any Debian archive mirror "
"for <userinput>http.us.debian.org/debian</userinput> in the command example "
"below, preferably a mirror close to you network-wise. Mirrors are listed at "
"<ulink url=\"http://www.debian.org/misc/README.mirrors\"></ulink>."
msgstr ""
"Komento <command>debootstrap</command> osaa noutaa tarvittavat tiedostot "
"suoraan varastoalueelta. <userinput>http://ftp.fi.debian.org/debian</"
"userinput> tilalle voi kirjoittaa minkä tahansa Debianin asennuspalvelimen "
"kopion, mieluiten verkon topologiassa lähellä olevan. Asennuspalvelimen "
"kopioiden luettelo on osoitteessa <ulink url=\"http://www.debian.org/misc/"
"README.mirrors\"></ulink>."

#. Tag: para
#: random-bits.xml:461
#, no-c-format
msgid ""
"If you have a &releasename; &debian; CD mounted at <filename>/cdrom</"
"filename>, you could substitute a file URL instead of the http URL: "
"<userinput>file:/cdrom/debian/</userinput>"
msgstr ""
"Jos &releasename; &debian; -romppu on liitettynä hakemistoon <filename>/"
"cdrom</filename>, voidaan http URL korvata tiedostoon viittaavalla URL:llä: "
"<userinput>file:/cdrom/debian/</userinput>"

#. Tag: para
#: random-bits.xml:467
#, fuzzy, no-c-format
msgid ""
"Substitute one of the following for <replaceable>ARCH</replaceable> in the "
"<command>debootstrap</command> command: <userinput>alpha</userinput>, "
"<userinput>amd64</userinput>, <userinput>arm</userinput>, <userinput>hppa</"
"userinput>, <userinput>i386</userinput>, <userinput>ia64</userinput>, "
"<userinput>m68k</userinput>, <userinput>mips</userinput>, <userinput>mipsel</"
"userinput>, <userinput>powerpc</userinput>, <userinput>s390</userinput>, or "
"<userinput>sparc</userinput>."
msgstr ""
"Korvaa komennossa <command>debootstrap</command> <replaceable>ARCH</"
"replaceable> jollakin seuraavista: <userinput>alpha</userinput>, "
"<userinput>arm</userinput>, <userinput>hppa</userinput>, <userinput>i386</"
"userinput>, <userinput>ia64</userinput>, <userinput>m68k</userinput>, "
"<userinput>mips</userinput>, <userinput>mipsel</userinput>, "
"<userinput>powerpc</userinput>, <userinput>s390</userinput>, tai "
"<userinput>sparc</userinput>."

#. Tag: screen
#: random-bits.xml:485
#, fuzzy, no-c-format
msgid ""
"# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
"     /mnt/debinst http://ftp.us.debian.org/debian"
msgstr ""
"# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
"     /mnt/debinst http://ftp.fi.debian.org/debian"

#. Tag: title
#: random-bits.xml:491
#, no-c-format
msgid "Configure The Base System"
msgstr "Perusjärjestelmän asetukset"

#. Tag: para
#: random-bits.xml:492
#, no-c-format
msgid ""
"Now you've got a real Debian system, though rather lean, on disk. "
"<command>chroot</command> into it: <informalexample><screen>\n"
"# LANG=C chroot /mnt/debinst /bin/bash\n"
"</screen></informalexample> After chrooting you may need to set the terminal "
"definition to be compatible with the Debian base system, for example:"
msgstr ""

#. Tag: screen
#: random-bits.xml:502
#, no-c-format
msgid "# export TERM=<replaceable>xterm-color</replaceable>"
msgstr ""

#. Tag: title
#: random-bits.xml:507
#, no-c-format
msgid "Mount Partitions"
msgstr "Liitetään osiot"

#. Tag: para
#: random-bits.xml:508
#, fuzzy, no-c-format
msgid ""
"You need to create <filename>/etc/fstab</filename>. "
"<informalexample><screen>\n"
"# editor /etc/fstab\n"
"</screen></informalexample> Here is a sample you can modify to suit: "
"<informalexample><screen>\n"
"# /etc/fstab: static file system information.\n"
"#\n"
"# file system    mount point   type    options                  dump pass\n"
"/dev/XXX         /             ext3    defaults                 0    1\n"
"/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
"\n"
"/dev/XXX         none          swap    sw                       0    0\n"
"proc             /proc         proc    defaults                 0    0\n"
"\n"
"/dev/fd0         /media/floppy auto    noauto,rw,sync,user,exec 0    0\n"
"/dev/cdrom       /media/cdrom  iso9660 noauto,ro,user,exec      0    0\n"
"\n"
"/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
"/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
"</screen></informalexample> Use <userinput>mount -a</userinput> to mount all "
"the file systems you have specified in your <filename>/etc/fstab</filename>, "
"or, to mount file systems individually, use: <informalexample><screen>\n"
"# mount /path   # e.g.: mount /usr\n"
"</screen></informalexample> Current Debian systems have mountpoints for "
"removable media under <filename>/media</filename>, but keep compatibility "
"symlinks in <filename>/</filename>. Create these as as needed, for example: "
"<informalexample><screen>\n"
"# cd /media\n"
"# mkdir cdrom0\n"
"# ln -s cdrom0 cdrom\n"
"# cd /\n"
"# ln -s media/cdrom\n"
"</screen></informalexample> You can mount the proc file system multiple "
"times and to arbitrary locations, though <filename>/proc</filename> is "
"customary. If you didn't use <userinput>mount -a</userinput>, be sure to "
"mount proc before continuing:"
msgstr ""
"On luotava tiedosto <filename>/etc/fstab</filename>. "
"<informalexample><screen>\n"
"# editor /etc/fstab\n"
"</screen></informalexample> Tästä esimerkkitiedostosta voi muokata sopivan: "
"<informalexample><screen>\n"
"# /etc/fstab: static file system information.\n"
"#\n"
"# file system    mount point   type    options                  dump pass\n"
"/dev/XXX         /             ext3    defaults                 0    1\n"
"/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
"\n"
"/dev/XXX         none          swap    sw                       0    0\n"
"proc             /proc         proc    defaults                 0    0\n"
"\n"
"/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0\n"
"/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0\n"
"\n"
"/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
"/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
"/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
"</screen></informalexample> Komento <userinput>mount -a</userinput> liittää "
"kaikki tiedostossa <filename>/etc/fstab</filename> luetellut "
"tiedostojärjestelmät, tai liitä tiedostojärjestelmät yksitellen "
"komentamalla: <informalexample><screen>\n"
"# mount /path   # esim.: mount /usr\n"
"</screen></informalexample> Tiedostojärjestelmä proc voidaan liittää useita "
"kertoja ja mielivaltaisiin liitoskohtiin, vaikkakin tapana on käyttää "
"<filename>/proc</filename>. Jos ei käytetty komentoa <userinput>mount -a</"
"userinput>, varmistu että proc on liitetty ennen jatkamista:"

#. Tag: screen
#: random-bits.xml:534
#, no-c-format
msgid "# mount -t proc proc /proc"
msgstr "# mount -t proc proc /proc"

#. Tag: para
#: random-bits.xml:536
#, no-c-format
msgid ""
"The command <userinput>ls /proc</userinput> should now show a non-empty "
"directory. Should this fail, you may be able to mount proc from outside the "
"chroot:"
msgstr ""
"Komennon <userinput>ls /proc</userinput> pitäisi nyt näyttää tiedostoja "
"hakemistossa. Jos tämä ei timi, proc voidaan ehkä liittää chroot-eristyksen "
"ulkopuolelta:"

#. Tag: screen
#: random-bits.xml:542
#, no-c-format
msgid "# mount -t proc proc /mnt/debinst/proc"
msgstr "# mount -t proc proc /mnt/debinst/proc"

#. Tag: title
#: random-bits.xml:548
#, fuzzy, no-c-format
msgid "Setting Timezone"
msgstr "Lähdekoneen asetukset"

#. Tag: para
#: random-bits.xml:549
#, no-c-format
msgid ""
"An option in the file <filename>/etc/default/rcS</filename> determines "
"whether the system will interpret the hardware clock as being set to UTC or "
"local time. The following command allow you to set that and choose your "
"timezone."
msgstr ""

#. Tag: screen
#: random-bits.xml:556
#, no-c-format
msgid ""
"# editor /etc/default/rcS\n"
"# tzconfig"
msgstr ""

#. Tag: title
#: random-bits.xml:562
#, no-c-format
msgid "Configure Networking"
msgstr "Verkon asetukset"

#. Tag: para
#: random-bits.xml:563
#, fuzzy, no-c-format
msgid ""
"To configure networking, edit <filename>/etc/network/interfaces</filename>, "
"<filename>/etc/resolv.conf</filename>, <filename>/etc/hostname</filename> "
"and <filename>/etc/hosts</filename>. <informalexample><screen>\n"
"# editor /etc/network/interfaces\n"
"</screen></informalexample> Here are some simple examples from <filename>/"
"usr/share/doc/ifupdown/examples</filename>: <informalexample><screen>\n"
"######################################################################\n"
"# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n"
"# See the interfaces(5) manpage for information on what options are\n"
"# available.\n"
"######################################################################\n"
"\n"
"# We always want the loopback interface.\n"
"#\n"
"auto lo\n"
"iface lo inet loopback\n"
"\n"
"# To use dhcp:\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet dhcp\n"
"\n"
"# An example static IP setup: (broadcast and gateway are optional)\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet static\n"
"#     address 192.168.0.42\n"
"#     network 192.168.0.0\n"
"#     netmask 255.255.255.0\n"
"#     broadcast 192.168.0.255\n"
"#     gateway 192.168.0.1\n"
"</screen></informalexample> Enter your nameserver(s) and search directives "
"in <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n"
"# editor /etc/resolv.conf\n"
"</screen></informalexample> A simple example <filename>/etc/resolv.conf</"
"filename>: <informalexample><screen>\n"
"search hqdom.local\n"
"nameserver 10.1.1.36\n"
"nameserver 192.168.9.100\n"
"</screen></informalexample> Enter your system's host name (2 to 63 "
"characters): <informalexample><screen>\n"
"# echo DebianHostName &gt; /etc/hostname\n"
"</screen></informalexample> And a basic <filename>/etc/hosts</filename> with "
"IPv6 support: <informalexample><screen>\n"
"127.0.0.1 localhost DebianHostName\n"
"\n"
"# The following lines are desirable for IPv6 capable hosts\n"
"::1     ip6-localhost ip6-loopback\n"
"fe00::0 ip6-localnet\n"
"ff00::0 ip6-mcastprefix\n"
"ff02::1 ip6-allnodes\n"
"ff02::2 ip6-allrouters\n"
"ff02::3 ip6-allhosts\n"
"</screen></informalexample> If you have multiple network cards, you should "
"arrange the names of driver modules in the <filename>/etc/modules</filename> "
"file into the desired order. Then during boot, each card will be associated "
"with the interface name (eth0, eth1, etc.) that you expect."
msgstr ""
"Verkon asetukset tehdään muokkaamalla tiedostoja <filename>/etc/network/"
"interfaces</filename>, <filename>/etc/resolv.conf</filename>, <filename>/etc/"
"hostname</filename> ja <filename>/etc/hosts</filename>. "
"<informalexample><screen>\n"
"# editor /etc/network/interfaces\n"
"</screen></informalexample> Tässä on muutamia yksinkertaisia esimerkkejä "
"hakemistosta <filename>/usr/share/doc/ifupdown/examples</filename>: "
"<informalexample><screen>\n"
"######################################################################\n"
"# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n"
"# See the interfaces(5) manpage for information on what options are\n"
"# available.\n"
"######################################################################\n"
"\n"
"# We always want the loopback interface.\n"
"#\n"
"auto lo\n"
"iface lo inet loopback\n"
"\n"
"# To use dhcp:\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet dhcp\n"
"\n"
"# An example static IP setup: (broadcast and gateway are optional)\n"
"#\n"
"# auto eth0\n"
"# iface eth0 inet static\n"
"#     address 192.168.0.42\n"
"#     network 192.168.0.0\n"
"#     netmask 255.255.255.0\n"
"#     broadcast 192.168.0.255\n"
"#     gateway 192.168.0.1\n"
"</screen></informalexample> Tiedostoon <filename>/etc/resolv.conf</filename> "
"kirjoitetaan nimipalvelimet ja hakuasetuksia: <informalexample><screen>\n"
"# editor /etc/resolv.conf\n"
"</screen></informalexample> Yksinkertainen <filename>/etc/resolv.conf</"
"filename>: <informalexample><screen>\n"
"search hqdom.local\\000\n"
"nameserver 10.1.1.36\n"
"nameserver 192.168.9.100\n"
"</screen></informalexample> Kirjoita järjestelmän konenimi (2 - 63 merkkiä): "
"<informalexample><screen>\n"
"# echo DebianinKonenimi &gt; /etc/hostname\n"
"</screen></informalexample> Jos verkkoliitäntöjä on useita, olisi "
"ajurimoduulien nimet järjestettävä tiedostossa <filename>/etc/modules</"
"filename> haluttuun järjestykseen. Näin on jokainen liitäntä käynnistyksessä "
"tunnetulla nimellä (eth0, eth1, etc.)."

#. Tag: title
#: random-bits.xml:604
#, fuzzy, no-c-format
msgid "Configure Apt"
msgstr "Verkon asetukset"

#. Tag: para
#: random-bits.xml:605
#, no-c-format
msgid ""
"Debootstrap will have created a very basic <filename>/etc/apt/sources.list</"
"filename> that will allow installing additional packages. However, you may "
"want to add some additional sources, for example for source packages and "
"security updates: <informalexample><screen>\n"
"deb-src http://ftp.us.debian.org/debian etch main\n"
"\n"
"deb http://security.debian.org/ etch/updates main\n"
"deb-src http://security.debian.org/ etch/updates main\n"
"</screen></informalexample> Make sure to run <userinput>aptitude update</"
"userinput> after you have made changes to the sources list."
msgstr ""

#. Tag: title
#: random-bits.xml:621
#, fuzzy, no-c-format
msgid "Configure Locales and Keyboard"
msgstr "Näppäimistön asetukset"

#. Tag: para
#: random-bits.xml:622
#, fuzzy, no-c-format
msgid ""
"To configure your locale settings to use a language other than English, "
"install the <classname>locales</classname> support package and configure it. "
"Currently the use of UTF-8 locales is recommended. "
"<informalexample><screen>\n"
"# aptitude install locales\n"
"# dpkg-reconfigure locales\n"
"</screen></informalexample> To configure your keyboard (if needed):"
msgstr ""
"Maa-asetukset saadaan englannin lisäksi muidenkin kielien mukaiseksi "
"asentamalla paketti <classname>locales</classname> ja tekemällä sen "
"asetukset: <informalexample><screen>\n"
"# aptitude install locales\n"
"# dpkg-reconfigure locales\n"
"</screen></informalexample> HUOMAA: sovelluksen <classname>apt</classname> "
"asetukset on tehtävä ensin luomalla tiedosto <filename>/etc/apt/sources."
"list</filename> ja komentamalla <command>aptitude update</command>. Ennen "
"kuin otetaan käyttöön muita kuin ASCII- tai Latin1-merkistöjä käyttävä maa-"
"asetus, olisi luettava vastaava maa-asetusten HOWTO-ohje."

#. Tag: screen
#: random-bits.xml:632
#, fuzzy, no-c-format
msgid ""
"# aptitude install console-data\n"
"# dpkg-reconfigure console-data"
msgstr "# dpkg-reconfigure console-data"

#. Tag: para
#: random-bits.xml:634
#, no-c-format
msgid ""
"Note that the keyboard cannot be set while in the chroot, but will be "
"configured for the next reboot."
msgstr ""
"Huomaa ettei näppäimistön asetuksia saa käyttöön kun ollaan chroot-"
"eristettynä, mutta ne tulevat käyttöön seuraavassa käynnistyksessä."

#. Tag: title
#: random-bits.xml:644
#, no-c-format
msgid "Install a Kernel"
msgstr "Asennetaan ydin"

#. Tag: para
#: random-bits.xml:645
#, fuzzy, no-c-format
msgid ""
"If you intend to boot this system, you probably want a Linux kernel and a "
"boot loader. Identify available pre-packaged kernels with:"
msgstr ""
"Jos tämä järjestelmä aiotaan käynnistää, haluttaneen Linux ydin ja "
"käynnistyslatain. Saatavilla olevat ytimien valmiit asennuspaketit löytää "
"komennolla <informalexample><screen>\n"
"# apt-cache search linux-image\n"
"</screen></informalexample> Valittu ydin asennetaan asennuspaketin nimellä."

#. Tag: screen
#: random-bits.xml:650
#, no-c-format
msgid "# apt-cache search linux-image"
msgstr ""

#. Tag: para
#: random-bits.xml:652
#, no-c-format
msgid ""
"If you intend to use a pre-packaged kernel, you may want to create the "
"configuration file <filename>/etc/kernel-img.conf</filename> before you do "
"so. Here's an example file:"
msgstr ""

#. Tag: screen
#: random-bits.xml:658
#, no-c-format
msgid ""
"# Kernel image management overrides\n"
"# See kernel-img.conf(5) for details\n"
"do_symlinks = yes\n"
"relative_links = yes\n"
"do_bootloader = yes\n"
"do_bootfloppy = no\n"
"do_initrd = yes\n"
"link_in_boot = no"
msgstr ""

#. Tag: para
#: random-bits.xml:660
#, no-c-format
msgid ""
"For detailed information about this file and the various options, consult "
"its man page which will be available after installing the <classname>kernel-"
"package</classname> package. We recommend that you check that the values are "
"appropriate for your system."
msgstr ""

#. Tag: para
#: random-bits.xml:667
#, no-c-format
msgid ""
"Then install the kernel package of your choice using its package name. "
"<informalexample><screen>\n"
"# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
"replaceable>\n"
"</screen></informalexample> If you did not create a <filename>/etc/kernel-"
"img.conf</filename> before installing a pre-packaged kernel, you may be "
"asked some questions during its installation that refer to it."
msgstr ""

#. Tag: title
#: random-bits.xml:681
#, no-c-format
msgid "Set up the Boot Loader"
msgstr "Käynnistyslataimen asetukset"

#. Tag: para
#: random-bits.xml:682
#, no-c-format
msgid ""
"To make your &debian; system bootable, set up your boot loader to load the "
"installed kernel with your new root partition. Note that "
"<command>debootstrap</command> does not install a boot loader, though you "
"can use <command>aptitude</command> inside your Debian chroot to do so."
msgstr ""
"&debian; -järjestelmä saadaan käynnistyskelpoiseksi säätämällä "
"käynnistyslatain lataamaan asennettu ydin ja käyttämään uutta "
"juuritiedostojärjestelmää. Huomaa ettei <command>debootstrap</command> "
"asenna käynnistyslatainta, mutta sen voi asentaa komennolla "
"<command>aptitude</command> Debianin chroot-eristyksen sisällä."

#. Tag: para
#: random-bits.xml:689
#, fuzzy, no-c-format
msgid ""
"Check <userinput>info grub</userinput> or <userinput>man lilo.conf</"
"userinput> for instructions on setting up the bootloader. If you are keeping "
"the system you used to install Debian, just add an entry for the Debian "
"install to your existing grub <filename>menu.lst</filename> or "
"<filename>lilo.conf</filename>. For <filename>lilo.conf</filename>, you "
"could also copy it to the new system and edit it there. After you are done "
"editing, call <command>lilo</command> (remember it will use <filename>lilo."
"conf</filename> relative to the system you call it from)."
msgstr ""
"Komennoilla <userinput>info grub</userinput> tai <userinput>man lilo.conf</"
"userinput> löytyy ohjeita käynnistyslataimen asetuksista. Jos järjestelmä "
"josta Debian asennettiin halutaan säilyttää, riittää lisätä vanhaan grubin "
"tiedostoon <filename>menu.lst</filename> tai lilon tiedostoon <filename>lilo."
"conf</filename> tietue Debiania varten. Tiedoston <filename>lilo.conf</"
"filename> voi myös kopioida uuteen järjestelmään ja muokata sitä siellä. "
"Muokkauksen jälkeen käynnistetään komento <command>lilo</command> (muista "
"että se käyttää tiedostoa <filename>lilo.conf</filename> siitä "
"järjestelmästä jossa se käynnistettiin."

#. Tag: para
#: random-bits.xml:701
#, no-c-format
msgid ""
"Installing and setting up <classname>grub</classname> is as easy as: "
"<informalexample><screen>\n"
"# aptitude install grub\n"
"# grub-install /dev/<replaceable>hda</replaceable>\n"
"# update-grub\n"
"</screen></informalexample> The second command will install <command>grub</"
"command> (in this case in the MBR of <literal>hda</literal>). The last "
"command will create a sane and working <filename>/boot/grub/menu.lst</"
"filename>."
msgstr ""

#. Tag: para
#: random-bits.xml:711
#, no-c-format
msgid "Here is a basic <filename>/etc/lilo.conf</filename> as an example:"
msgstr ""
"Tässä on tiedoston <filename>/etc/lilo.conf</filename> perusversio malliksi:"

#. Tag: screen
#: random-bits.xml:715
#, fuzzy, no-c-format
msgid ""
"boot=/dev/<replaceable>hda6</replaceable>\n"
"root=/dev/<replaceable>hda6</replaceable>\n"
"install=menu\n"
"delay=20\n"
"lba32\n"
"image=/vmlinuz\n"
"label=Debian"
msgstr ""
"boot=/dev/hda6\n"
"root=/dev/hda6\n"
"install=menu\n"
"delay=20\n"
"lba32\n"
"image=/vmlinuz\n"
"label=Debian"

#. Tag: para
#: random-bits.xml:717
#, no-c-format
msgid ""
"Depending on which bootloader you selected, you can now make some additional "
"changes in <filename>/etc/kernel-img.conf</filename>."
msgstr ""

#. Tag: para
#: random-bits.xml:722
#, no-c-format
msgid ""
"For the <classname>grub</classname> bootloader, you should set the "
"<literal>do_bootloader</literal> option to <quote>no</quote>. And to "
"automatically update your <filename>/boot/grub/menu.lst</filename> on "
"installation or removal of Debian kernels, add the following lines: "
"<informalexample><screen>\n"
"postinst_hook = update-grub\n"
"postrm_hook   = update-grub\n"
"</screen></informalexample> For the <classname>lilo</classname> bootloader, "
"the value of <literal>do_bootloader</literal> needs to remain <quote>yes</"
"quote>."
msgstr ""

#. Tag: para
#: random-bits.xml:734
#, no-c-format
msgid ""
"Check <userinput>man yaboot.conf</userinput> for instructions on setting up "
"the bootloader. If you are keeping the system you used to install Debian, "
"just add an entry for the Debian install to your existing <filename>yaboot."
"conf</filename>. You could also copy it to the new system and edit it there. "
"After you are done editing, call ybin (remember it will use <filename>yaboot."
"conf</filename> relative to the system you call it from)."
msgstr ""
"Komennolla <userinput>man yaboot.conf</userinput> löytyy ohjeita "
"käynnistyslataimen asetuksista. Jos järjestelmä josta Debian asennettiin "
"halutaan säilyttää, riittää lisätä vanhaan <filename>yaboot.conf</filename> "
"tiedostoon tietue Debiania varten. Tiedoston voi myös kopioida uuteen "
"järjestelmään ja muokata sitä siellä. Muokkauksen jälkeen käynnistetään "
"komento <command>ybin</command> (muista että se käyttää tiedostoa "
"<filename>yaboot.conf</filename> siitä järjestelmästä jossa se "
"käynnistettiin.\""

#. Tag: para
#: random-bits.xml:744
#, no-c-format
msgid ""
"Here is a basic <filename>/etc/yaboot.conf</filename> as an example: "
"<informalexample><screen>\n"
"boot=/dev/hda2\n"
"device=hd:\n"
"partition=6\n"
"root=/dev/hda6\n"
"magicboot=/usr/lib/yaboot/ofboot\n"
"timeout=50\n"
"image=/vmlinux\n"
"label=Debian\n"
"</screen></informalexample> On some machines, you may need to use "
"<userinput>ide0:</userinput> instead of <userinput>hd:</userinput>."
msgstr ""
"Tässä on tiedoston <filename>/etc/yaboot.conf</filename> perusversio "
"malliksi: <informalexample><screen>\n"
"boot=/dev/hda2\n"
"device=hd:\n"
"partition=6\n"
"root=/dev/hda6\n"
"magicboot=/usr/lib/yaboot/ofboot\n"
"timeout=50\n"
"image=/vmlinux\n"
"label=Debian\n"
"</screen></informalexample> Joissakin koneissa on ehkä käytettävä "
"<userinput>ide0:</userinput> eikä <userinput>hd:</userinput>."

#. Tag: title
#: random-bits.xml:757
#, no-c-format
msgid "Finishing touches"
msgstr ""

#. Tag: para
#: random-bits.xml:758
#, no-c-format
msgid ""
"As mentioned earlier, the installed system will be very basic. If you would "
"like to make the system a bit more mature, there is an easy method to "
"install all packages with <quote>standard</quote> priority: "
"<informalexample><screen>\n"
"# tasksel install standard\n"
"</screen></informalexample> Of course, you can also just use "
"<command>aptitude</command> to install packages individually."
msgstr ""

#. Tag: para
#: random-bits.xml:769
#, no-c-format
msgid ""
"After the installation there will be a lot of downloaded packages in "
"<filename>/var/cache/apt/archives/</filename>. You can free up some "
"diskspace by running:"
msgstr ""

#. Tag: screen
#: random-bits.xml:775
#, no-c-format
msgid "# aptitude clean"
msgstr ""

#. Tag: title
#: random-bits.xml:786
#, no-c-format
msgid "Installing &debian; over Parallel Line IP (PLIP)"
msgstr "&debian;:in asennus käyttäen Parallel Line IP:tä (PLIP)"

#. Tag: para
#: random-bits.xml:788
#, no-c-format
msgid ""
"This section explains how to install &debian; on a computer without an "
"Ethernet card, but with just a remote gateway computer attached via a Null-"
"Modem cable (also called Null-Printer cable). The gateway computer should be "
"connected to a network that has a Debian mirror on it (e.g. to the Internet)."
msgstr ""
"Tässä luvussa kerrotaan miten &debian; asennetaan tietokoneelle jossa ei ole "
"Ethernetliitäntää, vain yhdyskäytävänä toimiva etätietokone johon on yhteys "
"nollamodeemikaapelilla (eli nollatulostinkaapelilla). Yhdyskäytäväkoneen "
"olisi oltava verkossa jossa on Debianin asennuspalvelimen kopio (esim. "
"Internetissä). "

#. Tag: para
#: random-bits.xml:796
#, no-c-format
msgid ""
"In the example in this appendix we will set up a PLIP connection using a "
"gateway connected to the Internet over a dial-up connection (ppp0). We will "
"use IP addresses 192.168.0.1 and 192.168.0.2 for the PLIP interfaces on the "
"target system and the source system respectively (these addresses should be "
"unused within your network address space)."
msgstr ""
"Tämän liitteen esimerkissä tehdään PLIP-yhteys yhdyskäytäväkoneeseen josta "
"on soittoyhteys Internetiin (ppp0). Käytettävät IP-numerot PLIP-liitännöille "
"ovat 192.168.0.1 tälle koneelle (kohdekone) ja 192.168.0.2 "
"yhdyskäytäväkoneelle (on valittava osoitteet jotka eivät kuulu "
"paikallisverkon osoiteavaruuteen)."

#. Tag: para
#: random-bits.xml:804
#, no-c-format
msgid ""
"The PLIP connection set up during the installation will also be available "
"after the reboot into the installed system (see <xref linkend=\"boot-new\"/"
">)."
msgstr ""
"Asennuksen aikana tehty PLIP-yhteys on käytettävissä myös kun on "
"käynnistetty asennettuun järjestelmään (katso <xref linkend=\"boot-new\"/>)."

#. Tag: para
#: random-bits.xml:809
#, no-c-format
msgid ""
"Before you start, you will need to check the BIOS configuration (IO base "
"address and IRQ) for the parallel ports of both the source and target "
"systems. The most common values are <literal>io=0x378</literal>, "
"<literal>irq=7</literal>."
msgstr ""
"Ennen asennuksen aloittamista on tarkistettava BIOS:n asetuksista IO base "
"address ja IRQ sekä kohdekoneen että yhdyskäytäväkoneen rinnakkaisportille. "
"Yleisimmät arvot ovat <literal>io=0x378</literal>, <literal>irq=7</literal>."

#. Tag: title
#: random-bits.xml:819
#, no-c-format
msgid "Requirements"
msgstr "Vaatimukset"

#. Tag: para
#: random-bits.xml:822
#, no-c-format
msgid ""
"A target computer, called <emphasis>target</emphasis>, where Debian will be "
"installed."
msgstr ""
"Kohdekone, käytetään nimeä <emphasis>kohde</emphasis>, johon Debian "
"asennetaan"

#. Tag: para
#: random-bits.xml:828
#, no-c-format
msgid "System installation media; see <xref linkend=\"installation-media\"/>."
msgstr "Asennustaltio; katso <xref linkend=\"installation-media\"/>."

#. Tag: para
#: random-bits.xml:833
#, no-c-format
msgid ""
"Another computer connected to the Internet, called <emphasis>source</"
"emphasis>, that will function as the gateway."
msgstr ""
"Toinen tietokone, käytetään nimeä <emphasis>lähde</emphasis>, joka on "
"kytketty Internettiin ja toimii yhdyskäytävänä."

#. Tag: para
#: random-bits.xml:839
#, no-c-format
msgid ""
"A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;"
"\">PLIP-Install-HOWTO</ulink> for more information on this cable and "
"instructions how to make your own."
msgstr ""
"DB-25 nollamodeemikaapeli. Katso ohjeesta <ulink url=\"&url-plip-install-"
"howto;\">PLIP-Install-HOWTO</ulink> lisätietoja ja teko-ohjeet jos teet "
"kaapelin itse."

#. Tag: title
#: random-bits.xml:851
#, no-c-format
msgid "Setting up source"
msgstr "Lähdekoneen asetukset"

#. Tag: para
#: random-bits.xml:852
#, no-c-format
msgid ""
"The following shell script is a simple example of how to configure the "
"source computer as a gateway to the Internet using ppp0."
msgstr ""
"Seuraava komentotiedosto on yksinkertainen esimerkki lähdekoneessa "
"tehtävistä asetuksista jotta se toimii yhdyskäytävänä Internettiin ppp0-"
"portin kautta."

#. Tag: screen
#: random-bits.xml:857
#, no-c-format
msgid ""
"#!/bin/sh\n"
"\n"
"# We remove running modules from kernel to avoid conflicts and to\n"
"# reconfigure them manually.\n"
"modprobe -r lp parport_pc\n"
"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</"
"replaceable>\n"
"modprobe plip\n"
"\n"
"# Configure the plip interface (plip0 for me, see dmesg | grep plip)\n"
"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint "
"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
"\n"
"# Configure gateway\n"
"modprobe iptable_nat\n"
"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j "
"MASQUERADE\n"
"echo 1 > /proc/sys/net/ipv4/ip_forward"
msgstr ""
"#!/bin/sh\n"
"\n"
"# Poistetaan ytimestä käytössä olevat moduulit jottei tule \n"
"# ristiriitoja ja jotta niiden asetukset saadaan tehtyä uudelleen.\n"
"modprobe -r lp parport_pc\n"
"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</"
"replaceable>\n"
"modprobe plip\n"
"\n"
"# Tehdään plip-liitännän asetukset (tässä plip0, katso dmesg | grep plip)\n"
"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint "
"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
"\n"
"# Tehdään yhdyskäytävän asetukset\n"
"modprobe iptable_nat\n"
"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j "
"MASQUERADE\n"
"echo 1 > /proc/sys/net/ipv4/ip_forward"

#. Tag: title
#: random-bits.xml:863
#, no-c-format
msgid "Installing target"
msgstr "Asennetaan kohdekone"

#. Tag: para
#: random-bits.xml:864
#, no-c-format
msgid ""
"Boot the installation media. The installation needs to be run in expert "
"mode; enter <userinput>expert</userinput> at the boot prompt. If you need to "
"set parameters for kernel modules, you also need to do this at the boot "
"prompt. For example, to boot the installer and set values for the <quote>io</"
"quote> and <quote>irq</quote> options for the parport_pc module, enter the "
"following at the boot prompt: <informalexample><screen>\n"
"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc."
"irq=<replaceable>7</replaceable>\n"
"</screen></informalexample> Below are the answers that should be given "
"during various stages of the installation."
msgstr ""
"Käynnistetään kone asennustaltiolta. Asennus on suoritettava expert-tilassa; "
"kirjoita asentimen kehotteeseen <userinput>expert</userinput>. Jos ytimien "
"moduuleille on välitettävä parametreja, on tämäkin tehtävä asentimen "
"kehotteessa. Esimerkiksi asennin käynnistetään ja annetaan moduulille "
"parport_pc parametrit <quote>io</quote> ja <quote>irq</quote>: "
"<informalexample><screen>\n"
"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc."
"irq=<replaceable>7</replaceable>\n"
"</screen></informalexample> Asennuksen aikana pitäisi kysymyksiin vastata "
"kuten seuraavassa kerrotaan."

#. Tag: guimenuitem
#: random-bits.xml:883
#, no-c-format
msgid "Load installer components from CD"
msgstr "Ladattavat asentimen osat"

#. Tag: para
#: random-bits.xml:885
#, no-c-format
msgid ""
"Select the <userinput>plip-modules</userinput> option from the list; this "
"will make the PLIP drivers available to the installation system."
msgstr ""
"Valitaan luettelosta kohta <userinput>plip-modules</userinput>; tämän "
"jälkeen PLIP-ajurit ovat käytettävissä asennusjärjestelmässä."

#. Tag: guimenuitem
#: random-bits.xml:893
#, no-c-format
msgid "Detect network hardware"
msgstr "Tunnista verkkolaitteisto"

#. Tag: para
#: random-bits.xml:898
#, no-c-format
msgid ""
"If target <emphasis>does</emphasis> have a network card, a list of driver "
"modules for detected cards will be shown. If you want to force &d-i; to use "
"plip instead, you have to deselect all listed driver modules. Obviously, if "
"target doesn't have a network card, the installer will not show this list."
msgstr ""
"Jos kohdekoneessa <emphasis>on</emphasis> verkkoliitäntä, näytetään luettelo "
"löydettyjen liitäntöjen ajurimoduuleista. Mikäli halutaan pakottaa &d-i; "
"käyttämään plip-liitäntää eikä näitä, on poistettava valinta kaikista "
"luettelon ajurimoduuleista. Asennin ei tietenkään näytä tätä luetteloa jos "
"kohdekoneessa ei ole verkkoliitäntää."

#. Tag: para
#: random-bits.xml:907
#, no-c-format
msgid ""
"Because no network card was detected/selected earlier, the installer will "
"ask you to select a network driver module from a list. Select the "
"<userinput>plip</userinput> module."
msgstr ""
"Koska aiemmin ei löytynyt tai ei valittu verkkoliitäntää, pyytää asennin "
"valitsemaan verkkoajurin luettelosta. Valitaan moduuli <userinput>plip</"
"userinput>."

#. Tag: guimenuitem
#: random-bits.xml:919
#, no-c-format
msgid "Configure the network"
msgstr "Tee verkkoasetukset"

#. Tag: para
#: random-bits.xml:922
#, no-c-format
msgid "Auto-configure network with DHCP: No"
msgstr "Haetaanko verkkoasetukset automaattisesti DHCP:llä?"

#. Tag: para
#: random-bits.xml:927
#, no-c-format
msgid ""
"IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
msgstr ""
"IP-osoite: <userinput><replaceable>192.168.0.1</replaceable></userinput>"

#. Tag: para
#: random-bits.xml:932
#, no-c-format
msgid ""
"Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
"userinput>"
msgstr ""
"kaksipisteosoite: <userinput><replaceable>192.168.0.2</replaceable></"
"userinput>"

#. Tag: para
#: random-bits.xml:938
#, no-c-format
msgid ""
"Name server addresses: you can enter the same addresses used on source (see "
"<filename>/etc/resolv.conf</filename>)"
msgstr ""
"Nimipalvelinten osoitteet: voidaan käyttää samoja kuin yhdyskäytäväkone "
"(katso tiedostosta <filename>/etc/resolv.conf</filename>)"

#. Tag: title
#: random-bits.xml:957
#, no-c-format
msgid "The Graphical Installer"
msgstr ""

#. Tag: para
#: random-bits.xml:958
#, no-c-format
msgid ""
"The graphical version of the installer is only available for a limited "
"number of architectures, including &arch-title;. The functionality of the "
"graphical installer is essentially the same as that of the regular installer "
"as it basically uses the same programs, but with a different frontend."
msgstr ""

#. Tag: para
#: random-bits.xml:966
#, no-c-format
msgid ""
"Although the functionality is identical, the graphical installer still has a "
"few significant advantages. The main advantage is that it supports more "
"languages, namely those that use a character set that cannot be displayed "
"with the regular <quote>newt</quote> frontend. It also has a few usability "
"advantages such as the option to use a mouse, and in some cases several "
"questions can be displayed on a single screen."
msgstr ""

#. Tag: para
#: random-bits.xml:975
#, no-c-format
msgid ""
"The graphical installer is available with all CD images and with the hd-"
"media installation method. As the graphical installer uses a separate (much "
"larger) initrd than the regular installer, it has to be booted using "
"<userinput>installgui</userinput> instead of <userinput>install</userinput>. "
"Analogous, the expert and rescue modes are booted using "
"<userinput>expertgui</userinput> and <userinput>rescuegui</userinput> "
"respectively."
msgstr ""

#. Tag: para
#: random-bits.xml:985
#, no-c-format
msgid ""
"It is also available as a special <quote>mini</quote> ISO image<footnote id="
"\"gtk-miniiso\"> <para> The mini ISO image can be downloaded from a Debian "
"mirror as described in <xref linkend=\"downloading-files\"/>. Look for "
"<quote>gtk-miniiso</quote>. </para> </footnote>, which is mainly useful for "
"testing; in this case the image is booted just using <userinput>install</"
"userinput>. There is no graphical installer image that can be netbooted."
msgstr ""

#. Tag: para
#: random-bits.xml:999
#, no-c-format
msgid ""
"For &arch-title;, currently only an experimental <quote>mini</quote> ISO "
"image is available<footnote id=\"gtk-miniiso\"> <para> The mini ISO image "
"can be downloaded from a Debian mirror as described in <xref linkend="
"\"downloading-files\"/>. Look for <quote>gtk-miniiso</quote>. </para> </"
"footnote>. It should work on almost all PowerPC systems that have an ATI "
"graphical card, but is unlikely to work on other systems."
msgstr ""

#. Tag: para
#: random-bits.xml:1012
#, no-c-format
msgid ""
"The graphical installer requires significantly more memory to run than the "
"regular installer: &minimum-memory-gtk;. If insufficient memory is "
"available, it will automatically fall back to the regular <quote>newt</"
"quote> frontend."
msgstr ""

#. Tag: para
#: random-bits.xml:1019
#, no-c-format
msgid ""
"You can add boot parameters when starting the graphical installer, just as "
"with the regular installer. One of those parameters allows you to configure "
"the mouse for left-handed use. See <xref linkend=\"boot-parms\"/> for valid "
"parameters."
msgstr ""

#. Tag: title
#: random-bits.xml:1029
#, no-c-format
msgid "Using the graphical installer"
msgstr ""

#. Tag: para
#: random-bits.xml:1030
#, no-c-format
msgid ""
"As already mentioned, the graphical installer basically works the same as "
"the regular installer and thus the rest of this manual can be used to guide "
"you through the installation process."
msgstr ""

#. Tag: para
#: random-bits.xml:1036
#, no-c-format
msgid ""
"If you prefer using the keyboard over the mouse, there are two things you "
"need to know. To expand a collapsed list (used for example for the selection "
"of countries within continents), you can use the <keycap>+</keycap> and "
"<keycap>-</keycap> keys. For questions where more than one item can be "
"selected (e.g. task selection), you first need to tab to the "
"<guibutton>Continue</guibutton> button after making your selections; hitting "
"enter will toggle a selection, not activate <guibutton>Continue</guibutton>."
msgstr ""

#. Tag: para
#: random-bits.xml:1046
#, no-c-format
msgid ""
"To switch to another console, you will also need to use the <keycap>Ctrl</"
"keycap> key, just as with the X Window System. For example, to switch to VT1 "
"you would use: <keycombo> <keycap>Ctrl</keycap> <keycap>Left Alt</keycap> "
"<keycap>F1</keycap> </keycombo>."
msgstr ""

#. Tag: title
#: random-bits.xml:1057
#, no-c-format
msgid "Known issues"
msgstr ""

#. Tag: para
#: random-bits.xml:1058
#, no-c-format
msgid ""
"Etch is the first release that includes the graphical installer and uses "
"some relatively new technology. There are a few known issues that you may "
"run into during the installation. We expect to be able to fix these issues "
"for the next release of &debian;."
msgstr ""

#. Tag: para
#: random-bits.xml:1068
#, no-c-format
msgid ""
"Information on some screens is not nicely formatted into columns as it "
"should be. The most obvious example is the first screen where you select "
"your language. Another example is the main screen of partman."
msgstr ""

#. Tag: para
#: random-bits.xml:1075
#, no-c-format
msgid ""
"Typing some characters may not work and in some cases the wrong character "
"may be printed. For example, \"composing\" a character by typing an accent "
"and then the letter over/under which the accent should appear does not work."
msgstr ""

#. Tag: para
#: random-bits.xml:1082
#, no-c-format
msgid "Support for touchpads is not yet optimal."
msgstr ""

#. Tag: para
#: random-bits.xml:1087
#, no-c-format
msgid ""
"You should not switch to a different console while the installer is busy; "
"this may cause the frontend to crash. The frontend will be restarted "
"automatically, but this may still cause problems with the installation. "
"Switching to another console while the installer is waiting for input should "
"work without causing any problems."
msgstr ""

#. Tag: para
#: random-bits.xml:1096
#, no-c-format
msgid ""
"Support for creating encrypted partitions is limited as it is not possible "
"to generate a random encryption key. It is possible to set up an encrypted "
"partition using a passphrase as encryption key."
msgstr ""

#~ msgid "Desktop"
#~ msgstr "Desktop"

#~ msgid "1258"
#~ msgstr "1258"

#~ msgid "<entry>418</entry>"
#~ msgstr "<entry>418</entry>"

#~ msgid "<entry>16</entry>"
#~ msgstr "<entry>16</entry>"

#~ msgid "<entry>62</entry>"
#~ msgstr "<entry>62</entry>"

#~ msgid "<entry>326</entry>"
#~ msgstr "<entry>326</entry>"

#~ msgid "<entry>71</entry>"
#~ msgstr "<entry>71</entry>"

#~ msgid ""
#~ "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
#~ "replaceable>"
#~ msgstr ""
#~ "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
#~ "replaceable>"

#~ msgid ""
#~ "Now you've got a real Debian system, though rather lean, on disk. "
#~ "<command>Chroot</command> into it:"
#~ msgstr ""
#~ "Nyt levyllä on oikea vaikkakin niukahko Debian-järjestelmä. Se "
#~ "käynnistetään <command>chroot</command>-eristettynä:"

#~ msgid "# LANG= chroot /mnt/debinst /bin/bash"
#~ msgstr "# LANG= chroot /mnt/debinst /bin/bash"

#~ msgid "To configure your keyboard:"
#~ msgstr "Näppäimistön asetukset tehdään komentamalla:"

#~ msgid "Configure Locales"
#~ msgstr "Maa-asetukset"

#~ msgid "1392"
#~ msgstr "1392"

#~ msgid "1852"
#~ msgstr "1852"

#~ msgid "<entry>12</entry>"
#~ msgstr "<entry>12</entry>"

#~ msgid "<entry>226</entry>"
#~ msgstr "<entry>226</entry>"

#~ msgid "<entry>47</entry>"
#~ msgstr "<entry>47</entry>"

#~ msgid "<entry>10</entry>"
#~ msgstr "<entry>10</entry>"

#~ msgid "<entry>66</entry>"
#~ msgstr "<entry>66</entry>"

#~ msgid "<entry>87</entry>"
#~ msgstr "<entry>87</entry>"

#~ msgid ""
#~ "Note that running <command>debootstrap</command> may require you to have "
#~ "a minimal version of <classname>glibc</classname> installed (currently "
#~ "GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but "
#~ "it calls various utilities that require <classname>glibc</classname>."
#~ msgstr ""
#~ "Huomaa että komennon <command>debootstrap</command> suoritus saattaa "
#~ "vaatia <classname>glibc</classname>:n tyngän olevan asennettuna (tällä "
#~ "hetkellä GLIBC_2.3). <command>debootstrap</command> itse on "
#~ "komentotiedosto, mutta se kutsuu työkaluohjelmia jotka tarvitsevat "
#~ "<classname>glibc</classname>:tä."