# translation of preseed.po to Greek # translation of preseed.po to # Copyright (C) 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # # quad-nrg.net , 2005, 2006, 2007, 2009. # quad-nrg.net , 2006, 2008. # Emmanuel Galatoulas , 2009. msgid "" msgstr "" "Project-Id-Version: preseed\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" "POT-Creation-Date: 2009-09-02 00:14+0000\n" "PO-Revision-Date: 2009-07-19 14:44+0300\n" "Last-Translator: Emmanuel Galatoulas \n" "Language-Team: Greek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. Tag: title #: preseed.xml:16 #, no-c-format msgid "Automating the installation using preseeding" msgstr "Αυτοματοποίηση της εγκατάστασης με χρήση προρυθμίσεων (preseeding)" #. Tag: para #: preseed.xml:18 #, no-c-format msgid "" "This appendix explains how to preseed answers to questions in &d-i; to " "automate your installation." msgstr "" "Το παράρτημα αυτό εξηγεί το πώς να προρυθμίσετε απαντήσεις σε ερωτήσεις του " "&d-i; για την αυτοματοποίηση της εγκατάστασής σας." #. Tag: para #: preseed.xml:23 preseed.xml:667 #, no-c-format msgid "" "The configuration fragments used in this appendix are also available as an " "example preconfiguration file from &urlset-example-preseed;." msgstr "" "Τα τμήματα ρυθμίσεων που χρησιμοποιούνται στο παράρτημα αυτό είναι επίσης " "διαθέσιμα σαν ένα αρχείο-παράδειγμα προρυθμίσεων στο &urlset-example-" "preseed;." #. Tag: title #: preseed.xml:31 #, no-c-format msgid "Introduction" msgstr "Εισαγωγή" #. Tag: para #: preseed.xml:32 #, no-c-format msgid "" "Preseeding provides a way to set answers to questions asked during the " "installation process, without having to manually enter the answers while the " "installation is running. This makes it possible to fully automate most types " "of installation and even offers some features not available during normal " "installations." msgstr "" "Το preseeding δίνει έναν τρόπο να ορίσετε απαντήσεις σε ερωτήσεις χωρίς να " "πρέπει να τις εισάγετε με το χέρι κατά την εκτέλεση της εγκατάστασης. Αυτό " "κάνει εφικτή την πλήρη αυτοματοποίηση των περισσότερων τύπων εγκατάστασης, " "προσφέροντας ακόμα και κάποια γνωρίσματα που δεν είναι διαθέσιμα " "στιςσυνηθισμένες εγκαταστάσεις." #. Tag: para #: preseed.xml:40 #, no-c-format msgid "" "Preseeding is not required. If you use an empty preseed file, the installer " "will behave just the same way as in a normal manual installation. Each " "question you preseed will (if you got it right!) modify the installation in " "some way from that baseline." msgstr "" "Δεν είναι απαραίτητο το preseeding. Αν χρησιμοποιήσετε ένα κενό αρχείο " "προρυθμίσεων, ο εγκαταστάτης θα συμπεριφερθεί όπως θα συμπεριφερόταν σε μια " "συνηθισμένη εγκατάσταση με το χέρι. Κάθε ερώτηση που θα έχετε προρυθμίσει " "(αν το κάνετε σωστά) θα τροποποιεί την εγκατάσταση με κάποιο τρόπο σε σχέση " "με αυτή τη βασική μορφή." #. Tag: title #: preseed.xml:50 #, no-c-format msgid "Preseeding methods" msgstr "Μέθοδοι προρύθμισης" #. Tag: para #: preseed.xml:51 #, no-c-format msgid "" "There are three methods that can be used for preseeding: initrd, file and network. " "Initrd preseeding will work with any installation method and supports " "preseeding of more things, but it requires the most preparation. File and " "network preseeding each can be used with different installation methods." msgstr "" "Υπάρχουν τρεις μέθοδοι που μπορούν να χρησιμοποιηθούν για preseeding: " "initrd, αρχείο και " "δίκτυο. Προρύθμιση με initrd θα δουλέψει για " "οποιαδήποτε μέθοδο εγκατάστασης και υποστηρίζει την προρύθμιση περισσοτέρων " "παραμέτρων αλλά απαιτεί και την μεγαλύτερη προετοιμασία. Προρύθμιση με " "αρχείο και δίκτυο μπορούν να χρησιμοποιηθούν η κάθε μία με διαφορετικές " "μεθόδους εγκατάστασης." #. Tag: para #: preseed.xml:60 #, no-c-format msgid "" "The following table shows which preseeding methods can be used with which " "installation methods." msgstr "" "Ο ακόλουθος πίνακας δείχνει ποιες μέθοδοι για preseeding μπορούν να " "χρησιμοποιηθούν και με ποιες μεθόδους εγκατάστασης." #. Tag: entry #: preseed.xml:69 #, no-c-format msgid "Installation method" msgstr "Μέθοδος εγκατάστασης" #. Tag: entry #: preseed.xml:69 #, no-c-format msgid "initrd" msgstr "initrd" #. Tag: entry #: preseed.xml:70 preseed.xml:514 #, no-c-format msgid "file" msgstr "αρχείο" #. Tag: entry #: preseed.xml:70 #, no-c-format msgid "network" msgstr "δίκτυο" #. Tag: entry #: preseed.xml:76 #, no-c-format msgid "CD/DVD" msgstr "CD/DVD" #. Tag: entry #: preseed.xml:77 preseed.xml:78 preseed.xml:79 preseed.xml:89 preseed.xml:91 #: preseed.xml:94 preseed.xml:95 preseed.xml:96 preseed.xml:99 preseed.xml:100 #: preseed.xml:101 preseed.xml:104 preseed.xml:106 preseed.xml:109 #: preseed.xml:111 #, no-c-format msgid "yes" msgstr "ναι" #. Tag: para #: preseed.xml:81 #, no-c-format msgid "" "but only if you have network access, and set preseed/url " "appropriately" msgstr "" "αλλά μόνο αν έχετε δικτυακή πρόσβαση και ρυθμίστε το preseed/url κατάλληλα" #. Tag: entry #: preseed.xml:88 #, no-c-format msgid "netboot" msgstr "εκκίνηση από δίκτυο" #. Tag: entry #: preseed.xml:90 preseed.xml:105 preseed.xml:110 #, no-c-format msgid "no" msgstr "όχι" #. Tag: entry #: preseed.xml:93 #, no-c-format msgid "" "hd-media (including usb-stick)" msgstr "" "hd-μέσο (συμπεριλαμβάνει usb-stick)" #. Tag: entry #: preseed.xml:98 #, no-c-format msgid "floppy based (cd-drivers)" msgstr "βασισμένη σε δισκέττα (οδηγοί-cd)" #. Tag: entry #: preseed.xml:103 #, no-c-format msgid "floppy based (net-drivers)" msgstr "βασισμένη σε δισκέττα (οδηγοί-δικτύου)" #. Tag: entry #: preseed.xml:108 #, no-c-format msgid "generic/tape" msgstr "γενική/ταινία" #. Tag: para #: preseed.xml:117 #, no-c-format msgid "" "An important difference between the preseeding methods is the point at which " "the preconfiguration file is loaded and processed. For initrd preseeding " "this is right at the start of the installation, before the first question is " "even asked. For file preseeding this is after the CD or CD image has been " "loaded. For network preseeding it is only after the network has been " "configured." msgstr "" "Μια σημαντική διαφορά μεταξύ των μεθόδων preseeding είναι το σημείο στο " "οποίο γίνεται η φόρτωση και η επεξεργασία του αρχείου προρυθμίσεων. Για " "προρύθμιση με initrd αυτό το σημείο είναι ακριβώς στην αρχή της " "εγκατάστασης, πριν γίνει καν η πρώτη ερώτηση. Για προρύθμιση με αρχείο αυτό " "είναι μετά την φόρτωση του CD ή της εικόνας του CD. Για preseeding με δίκτυο " "αυτό είναι μόνο μετά την ρύθμιση του δικτύου." #. Tag: para #: preseed.xml:126 #, no-c-format msgid "" "Obviously, any questions that have been processed before the " "preconfiguration file is loaded cannot be preseeded (this will include " "questions that are only displayed at medium or low priority, like the first " "hardware detection run). offers a way " "to avoid these questions being asked." msgstr "" "Πραφανώς, οποιεσδήποτε ερωτήσεις έχουν επεξεργαστεί πριν την φόρτωση του " "αρχείου προρυθμίσεων, δεν μπορούν να προρυθμιστούν (αυτό θα περιλαμβάνει " "ερωτήσεις που εμφανίζονται μόνο σε μεσαία ή χαμηλότερη προτεραιότητα, όπως η " "πρώτη φορά ανίχνευσης υλικού). Η ενότητα προσφέρει έναν τρόπο για να αποφύγετε να γίνουν αυτές οι ερωτήσεις." #. Tag: para #: preseed.xml:134 #, no-c-format msgid "" "In order to avoid the questions that would normally appear before the " "preseeding occurs, you can start the installer in auto mode. " "This delays questions that would normally be asked too early for preseeding " "(i.e. language, country and keyboard selection) until after the network " "comes up, thus allowing them to be preseeded. It also runs the installation " "at critical priority, which avoids many unimportant questions. See for details." msgstr "" "Για να αποφύγετε τις ερωτήσεις που κανονικά θα εμφανίζονταν πριν την " "εκτέλεση της προρύθμισης, μπορείτε να ξεκινήσετε τον εγκαταστάτη σε " "κατάσταση auto. Αυτό αναβάλλει ερωτήσεις που θα γίνονταν " "συνήθως πολύ νωρίς για την διαδικασία προρύθμισης (δηλ. επιλογή γλώσσας, " "χώρας και πληκτρολογίου) μέχρι την στιγμή ενεργοποίησης του δικτύου " "επιτρέποντας έτσι την προρύθμισή τους. Εκτελεί επίσης την εγκατάσταση με " "προτεραιότητα κρίσιμη, κάτι που επιτρέπει την αποφυγή πολλών μη σημαντικών " "ερωτήσεων. Δείτε το για λεπτομέρειες." #. Tag: title #: preseed.xml:148 #, no-c-format msgid "Limitations" msgstr "Περιορισμοί" #. Tag: para #: preseed.xml:149 #, no-c-format msgid "" "Although most questions used by &d-i; can be preseeded using this method, " "there are some notable exceptions. You must (re)partition an entire disk or " "use available free space on a disk; it is not possible to use existing " "partitions." msgstr "" "Αν και οι περισσότερες ερωτήσεις που χρησιμοποιοιούνται από τον &d-i; " "μπορούν να προρυθμιστούν μ' αυτήν την μέθοδο, υπάρχουν μερικές αξιοσημείωτες " "εξαιρέσεις. Θα πρέπει να (επανα)διαμερίσετε έναν ολόκληρο δίσκο ή να " "χρησιμοποιήσετε τον διαθέσιμο ελεύθερο χώρο σε έναν δίσκο. Δεν είναι δυνατόν " "να χρησιμοποιήσετε υπάρχουσες κατατμήσεις." #. Tag: title #: preseed.xml:223 #, no-c-format msgid "Using preseeding" msgstr "Χρησιμοποιώντας preseeding" #. Tag: para #: preseed.xml:224 #, no-c-format msgid "" "You will first need to create a preconfiguration file and place it in the " "location from where you want to use it. Creating the preconfiguration file " "is covered later in this appendix. Putting it in the correct location is " "fairly straightforward for network preseeding or if you want to read the " "file off a floppy or usb-stick. If you want to include the file on a CD or " "DVD, you will have to remaster the ISO image. How to get the " "preconfiguration file included in the initrd is outside the scope of this " "document; please consult the developers' documentation for &d-i;." msgstr "" "Θα πρέπει πρώτα να δημιουργήσετε ένα αρχείο προρύθμισης και να το " "τοποθετήσετεστο σημείο από το οποίο θέλετε να το χρησιμοποιήσετε. Η " "δημιουργία αυτού του αρχείου καλύπτεται παρακάτω σ' αυτό το παράρτημα. Η " "τοποθέτηση του αρχείου στο σωστό σημείο είναι αρκετά προφανής για προρύθμιση " "με δίκτυο ή αν θέλετε να το διαβάσετε από μια δισκέττα ή ένα usb-stick. Αν " "θέλετε να συμπεριλάβετε το αρχείο σ' ένα CD ή ένα DVD θα πρέπει να " "ξαναδημιουργήσετε την εικόνα ISO. Το πώς μπορείτε να συμπεριλάβετε το αρχείο " "σ' έναν δίσκο μνήμης initrd είναι πέρα από τους σκοπούς του παρόντος " "κειμένου. Παρακαλούμε συμβουλευθείτε την τεκμηρίωση για τους προγραμματιστές " "του &d-i;." #. Tag: para #: preseed.xml:235 #, no-c-format msgid "" "An example preconfiguration file that you can use as basis for your own " "preconfiguration file is available from &urlset-example-preseed;. This file " "is based on the configuration fragments included in this appendix." msgstr "" "Ένα παράδειγμα αρχείου προρυθμίσεων που μπορείτε να χρησιμοποιήσετε σαν βάση " "για το αντίστοιχο δικό σας, είναι διαθέσιμο στο &urlset-example-preseed;. Το " "αρχείο αυτόβασίζεται στα τμήματα των ρυθμίσεων που περιλαμβάνονται σ' αυτό " "εδώ το παράρτημα." #. Tag: title #: preseed.xml:244 #, no-c-format msgid "Loading the preconfiguration file" msgstr "Φόρτωση του αρχείου προρυθμίσεων" #. Tag: para #: preseed.xml:245 #, no-c-format msgid "" "If you are using initrd preseeding, you only have to make sure a file named " "preseed.cfg is included in the root directory of the " "initrd. The installer will automatically check if this file is present and " "load it." msgstr "" "Αν χρησιμοποιείτε initrd preseeding, αρκεί μόνο να βεβαιωθείτε ότι το αρχείο " "με όνομα preseed.cfg περιλαμβάνεται στον ριζικό " "κατάλογο του δίσκου initrd. Ο εγκαταστάτης θα ελέγξει αυτόματα αν το αρχείο " "είναι παρόν και θα το φορτώσει." #. Tag: para #: preseed.xml:252 #, no-c-format msgid "" "For the other preseeding methods you need to tell the installer what file to " "use when you boot it. This is normally done by passing the kernel a boot " "parameter, either manually at boot time or by editing the bootloader " "configuration file (e.g. syslinux.cfg) and adding the " "parameter to the end of the append line(s) for the kernel." msgstr "" "Για τις άλλες μεθόδους preseeding, θα χρειαστεί να πείτε στον εγκαταστάτη " "ποιο αρχείο θα χρησιμοποιήσετε κατά την εκκίνησή του. Αυτο γίνεται συνήθως " "\"περνώντας\" μια παράμετρο εκκίνησης στον πυρήνα, είτε με το χέρι κατά την " "στιγμή της εκκίνησης ή με επεξεργασία του αρχείου ρύθμισης του φορτωτή " "εκκίνησης (πχ του syslinux.cfg) και προσθέτοντας την " "παράμετρο στο τέλος της γραμμής(ών) προσθήκης για τον πυρήνα." #. Tag: para #: preseed.xml:260 #, no-c-format msgid "" "If you do specify the preconfiguration file in the bootloader configuration, " "you might change the configuration so you don't need to hit enter to boot " "the installer. For syslinux this means setting the timeout to 1 in syslinux.cfg." msgstr "" "Αν όντως ορίσετε το αρχείο προρυθμίσεων στη διαμόρφωση του φορτωτή " "εκκίνησης, μπορείτε να αλλάξετε αυτή τη διαμόρφωση ώστε να μην χρειάζεται να " "πατήσετε enter για να ξεκινήσετε τον εγκαταστάτη. Για το syslinux αυτό " "σημαίνει να θέσετε τον χρόνο εξόδου (timeout) στο αρχείο syslinux." "cfg σε 1." #. Tag: para #: preseed.xml:267 #, no-c-format msgid "" "To make sure the installer gets the right preconfiguration file, you can " "optionally specify a checksum for the file. Currently this needs to be a " "md5sum, and if specified it must match the preconfiguration file or the " "installer will refuse to use it." msgstr "" "Για να βεβαιωθείτε ότι ο εγκαταστάτης ανακτά το σωστό αρχείο, μπορείτε να " "προσδιορίσετε επιπλέον ένα checksum για το αρχείο. Προς το παρόν, αυτό θα " "πρέπει να είναι ένα md5sum και αν καθοριστεί θα πρέπει να ταιριάζει στο " "αρχείο προρύθμισης, διαφορετικά ο εγκαταστάτης θα αρνηθεί να το " "χρησιμοποιήσει." #. Tag: screen #: preseed.xml:276 #, no-c-format msgid "" "Boot parameters to specify:\n" "- if you're netbooting:\n" " preseed/url=http://host/path/to/preseed.cfg\n" " preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n" "\n" "- if you're booting a remastered CD:\n" " preseed/file=/cdrom/preseed.cfg\n" " preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n" "\n" "- if you're installing from USB media (put the preconfiguration file in the\n" " toplevel directory of the USB stick):\n" " preseed/file=/hd-media/preseed.cfg\n" " preseed/file/checksum=5da499872becccfeda2c4872f9171c3d" msgstr "" "Παράμετροι εκκίνησης που πρέπει να καθορίσετε:\n" "- για εκκίνηση από το δίκτυο:\n" " preseed/url=http://host/path/to/preseed.cfg\n" " preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n" "\n" "- για εκκίνηση από επανεπεξεργασμένο CD:\n" " preseed/file=/cdrom/preseed.cfg\n" " preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n" "\n" "- για εγκατάσταση από μέσο USB (τοποθετήστε το αρχείο preseed στον\n" " κορυφαίο κατάλογο του USB stick):\n" " preseed/file=/hd-media/preseed.cfg\n" " preseed/file/checksum=5da499872becccfeda2c4872f9171c3d" #. Tag: para #: preseed.xml:278 #, no-c-format msgid "" "Note that preseed/url can be shortened to just " "url and preseed/file to just " "file when they are passed as boot parameters." msgstr "" "Σημειώστε ότι οι διαδρομές για τα αρχεία preseed/url " "και preseed/file μπορούν να συντομευθούν απλά σε " "url και file αντίστοιχα, όταν " "δίνονται σαν παράμετροι εκκίνησης." #. Tag: title #: preseed.xml:288 #, no-c-format msgid "Using boot parameters to preseed questions" msgstr "Χρήση παραμέτρων εκκίνησης για την προρύθμιση ερωτήσεων" #. Tag: para #: preseed.xml:289 #, no-c-format msgid "" "If a preconfiguration file cannot be used to preseed some steps, the install " "can still be fully automated, since you can pass preseed values on the " "command line when booting the installer." msgstr "" "Αν ένα αρχείο προρύθμισης δεν μπορεί να χρησιμοποιηθεί για την προρύθμιση " "κάποιων βημάτων, η εγκατάσταση είναι δυνατόν να αυτοματοποιηθεί ακόμα " "πλήρως, αφού μπορείτε να περάσετε προκαθορισμένες τιμές στην ίδια την γραμμή " "εντολών κατά την εκκίνηση του εγκαταστάτη." #. Tag: para #: preseed.xml:295 #, no-c-format msgid "" "Boot parameters can also be used if you do not really want to use " "preseeding, but just want to provide an answer for a specific question. Some " "examples where this can be useful are documented elsewhere in this manual." msgstr "" "Παράμετροι εκκίνησης μπορούν επίσης να χρησιμοποιηθούν αν δεν θέλετε " "πραγματικά να χρησιμοποιήσετε τη μέθοδο προρύθμισης αλλά απλά να δώσετε " "απάντηση σε μια συγκεκριμένη ερώτηση. Μερικά παραδείγματα όπου αυτό μπορεί " "να είναι χρήσιμο τεκμηριώνονται σε άλλο σημείο αυτού του εγχειριδίου." #. Tag: para #: preseed.xml:301 #, no-c-format msgid "" "To set a value to be used inside &d-i;, just pass " "path/to/variable=value for any of the preseed variables listed in the " "examples in this appendix. If a value is to be used to configure packages " "for the target system, you will need to prepend the owner The owner of a debconf variable (or template) is " "normally the name of the package that contains the corresponding debconf " "template. For variables used in the installer itself the owner is d-" "i. Templates and variables can have more than one owner which helps " "to determine whether they can be removed from the debconf database if the " "package is purged. of the variable as in " "owner:path/to/variable=value. If you don't " "specify the owner, the value for the variable will not be copied to the " "debconf database in the target system and thus remain unused during the " "configuration of the relevant package." msgstr "" "Για να ρυθμίσετε μια τιμή ώστε να χρησιμοποιηθεί μέσα στον &d-i; απλά " "περάστε τις τιμές path/to/variable=value για τις " "προρυθμισμένες παραμέτρους που αναφέρονται στα παραδείγματα αυτού του " "παραρτήματος. Αν μια τιμή πρόκειται να χρησιμοποιηθεί για την ρύθμιση " "πακέτων στο προς εγκατάσταση σύστημα, θα πρέπει να προτάξετε την παράμετρο " "owner Ο κάτοχος (owner) μιας " "μεταβλητής του debconf (ή ενός υποδείγματος, template) είναι συνήθως το " "όνομα του πακέτου του πακέτου που περιέχει το αντίστοιχο υπόδειγμα debconf. " "Για μεταβλητέςπου χρησιμοποιούνται στον ίδιο τον εγκαταστάτη ο κάτοχος είναι " "d-i. Υποδείγματα και μεταβλητές μπορούν να έχουν " "περισσότερους από έναν κατόχους κάτι που βοηθά στον προσδιορισμό του αν " "αυτές μπορούν να αφαιρεθούν από την βάση δεδομένων του debconf σε περίπτωση " "πλήρους αφαίρεσης του πακέτου. της μεταβλητής όπως για " "παράδειγμα στο owner:path/" "to/variable=value. Αν " "δεν προσδιορίσετε τον κάτοχο, η τιμή για την μεταβλητή δεν θα αντιγραφεί " "στην βάση δεδομένων του debconf στο προς εγκατάσταση σύστημα και συνεπώς δεν " "θα χρησιμοποιηθεί κατά την ρύθμιση του αντίστοιχου πακέτου." #. Tag: para #: preseed.xml:324 #, no-c-format msgid "" "Normally, preseeding a question in this way will mean that the question will " "not be asked. To set a specific default value for a question, but still have " "the question asked, use ?= instead of = as " "operator. See also ." msgstr "" "Συνήθως η προρύθμιση μιας ερώτησης μ' αυτόν τον τρόπο σημαίνει ότι η " "συγκεκριμένη ερώτηση δεν θα τεθεί. Για να καθορίσετε μια συγκεκριμένη " "προεπιλεγμένη απάντηση για μια ερώτηση, αλλά παρόλα αυτά η ερώτηση αυτή να " "γίνεται, χρησιμοποιήστε ?= αντί για = σαν " "τελεστή. Δείτε επίσης την ενότητα ." #. Tag: para #: preseed.xml:331 #, no-c-format msgid "" "Note that some variables that are frequently set at the boot prompt have a " "shorter alias. If an alias is available, it is used in the examples in this " "appendix instead of the full variable. The preseed/url " "variable for example has been aliased as url. Another " "example is the tasks alias, which translates to " "tasksel:tasksel/first." msgstr "" "Σημειώστε ότι μερικές μεταβλητές που ορίζονται συχνά στο προτρεπτικό " "εκκίνησης έχουν ένα συντομότερο παρωνύμιο (alias). Αν ένα τέτοιο παρωνύμιο " "είναι διαθέσιμο, είναι αυτό που χρησιμοποιείται στα παραδείγματα αυτού του " "παραρτήματος αντί του πλήρους ονόματος της μεταβλητής. Για παράδειγμα, η " "μεταβλητή preseed/url χρησιμοποιείται με το παρωνύμιο " "url. Ένα άλλο παράδειγμα είναι το παρωνύμιο " "tasks που μεταφράζεται σε tasksel:tasksel/first." #. Tag: para #: preseed.xml:340 #, no-c-format msgid "" "A -- in the boot options has special meaning. Kernel " "parameters that appear after the last -- may be copied into " "the bootloader configuration for the installed system (if supported by the " "installer for the bootloader). The installer will automatically filter out " "any options (like preconfiguration options) that it recognizes." msgstr "" "Ένα όρισμα -- στις επιλογές εκκίνησης έχει ειδική σημασία. " "Παράμετροι του πυρήνα που εμφανίζονται μετά το τελευταίο -- " "μπορούν να αντιγραφούν στο αρχείο ρυθμίσεων του φορτωτή εκκίνησης για το " "εγκατεστημμένο σύστημα (αν αυτό υποστηρίζεται από τον εγκαταστάτη για τον " "φορτωτή εκκίνησης). Ο εγκαταστάτης θα φιλτράρει αυτόματα οποιεσδήποτε " "επιλογές (όπως επιλογές προρύθμισης) μπορεί να αναγνωρίσει." #. Tag: para #: preseed.xml:349 #, no-c-format msgid "" "Current linux kernels (2.6.9 and later) accept a maximum of 32 command line " "options and 32 environment options, including any options added by default " "for the installer. If these numbers are exceeded, the kernel will panic " "(crash). (For earlier kernels, these numbers were lower.)" msgstr "" "Πρόσφατοι πυρήνες του Linux (2.6.9 και μεταγενέστεροι) δέχονται ένα μέγιστο " "αριθμό 32 επιλογών γραμμής εντολών και 32 επιλογών περιβάλλοντος " "συμπεριλαμβανομένων οποιωνδήποτε επιλογών προστίθενται εξ' ορισμού από τον " "εγκαταστάτη. Αν οι αριθμοί αυτοί ξεπεραστούν, ο πυρήνας θα περάσει σε " "κατάσταση \"πανικού\" (crash). (Για παλιότερους πυρήνες αυτοί οι αριθμοί " "επιλογών ήταν χαμηλότεροι)." #. Tag: para #: preseed.xml:357 #, no-c-format msgid "" "For most installations some of the default options in your bootloader " "configuration file, like vga=normal, may be safely " "removed which may allow you to add more options for preseeding." msgstr "" "Για τις περισσότερες εγκαταστάσεις μερικές από τις προκαθορισμένες επιλογές " "στο αρχείο ρύθμισης του φορτωτή εκκίνησης, όπως vga=normal, μπορούν με ασφάλεια να αφαιρεθούν, επιτρέποντας έτσι την προσθήκη " "περισσότερων επιλογών για προρύθμιση." #. Tag: para #: preseed.xml:364 #, no-c-format msgid "" "It may not always be possible to specify values with spaces for boot " "parameters, even if you delimit them with quotes." msgstr "" "Ίσως να μην είναι πάντα εφικτό να καθορίσετε τιμές με κενά στις παραμέτρους " "εκκίνησης ακόμα κι αν τις βάλλετε μέσα σε εισαγωγικά." #. Tag: title #: preseed.xml:373 #, no-c-format msgid "Auto mode" msgstr "Αυτόματη Κατάσταση (auto)" #. Tag: para #: preseed.xml:374 #, no-c-format msgid "" "There are several features of Debian Installer that combine to allow fairly " "simple command lines at the boot prompt to result in arbitrarily complex " "customized automatic installs. To illustrate this, here are some examples " "that can be used at the boot prompt: \n" "auto url=autoserver\n" " This relies on there being a DHCP server that " "will get the machine to the point where autoserver can be " "resolved by DNS, perhaps after adding the local domain if that was provided " "by DHCP. If this was done at a site where the domain is example." "com, and they have a reasonably sane DHCP setup, it would result " "in the preseed file being retrieved from http://autoserver.example." "com/d-i/&releasename;/./preseed.cfg." msgstr "" "Υπάρχουν αρκετά γνωρίσματα του Εγκαταστάτη του Debian που συνδυάζονται για " "να επιτρππεψουν σχετικά απλές εντολές γραμμής στο προτρεπτικό εκκίνησης να " "δώσουν οσοδήποτε σύνθετες αυτόματες εγκαταστάσεις προσαρμοσμένες στις " "ανάγκες σας. Για να το δείξουμε αυτό παραθέτουμε εδώ μερικά παραδείγματα που " "μπορούν να χρησιμοποιηθούν στο προτρεπτικό εκκίνησης: " "\n" "auto url=autoserver\n" " Αυτό βασίζεται στην ύπαρξη ενός εξυπηρετητή DHCP " "ο οποίος θα φέρει το μηχάνημά μας στο σημείο που ένας autoserver του οποίου το όνομα μπορεί να προσδιοριστεί μέσω DNS, πιθανόν μετά " "και την προσθήκη του τοπικού τομέα δικτύου αν αυτό δώθηκε από το DHCP. Αν " "αυτό έγινε σε ένα δίκτυο που το όνομα τομέα του είναι example.com, και το οποίο διαθέτει μια εύλογη ρύθμιση της υπηρεσίας DHCP, τότε " "το αποτέλεσμα θα ήταν η ανάκτηση του αρχείου προρύθμισης από το " "http://autoserver.example.com/d-i/&releasename;/./preseed.cfg." #. Tag: para #: preseed.xml:391 #, no-c-format msgid "" "The last part of that url (d-i/&releasename;/./preseed.cfg) is taken from auto-install/defaultroot. By " "default this includes the directory &releasename; to " "allow future versions to specify their own codename and let people migrate " "forwards in a controlled manner. The /./ bit is used to " "indicate a root, relative to which subsequent paths can be anchored (for use " "in preseed/include and preseed/run). This allows files to be specified " "either as full URLs, paths starting with / that are thus anchored, or even " "paths relative to the location where the last preseed file was found. This " "can be used to construct more portable scripts where an entire hierarchy of " "scripts can be moved to a new location without breaking it, for example " "copying the files onto a USB stick when they started out on a web server. In " "this example, if the preseed file sets preseed/run to " "/scripts/late_command.sh then the file will be fetched " "from http://autoserver.example.com/d-i/&releasename;/./scripts/" "late_command.sh." msgstr "" "Το τελευταίο κομμάτι της διεύθυνσης (d-i/&releasename;/./preseed." "cfg) λαμβάνεται από το auto-install/defaultroot. Εξ' ορισμού περιλαμβάνει τον κατάλογο &releasename; για να επιτρέπει σε μεταγενέστερες εκδόσεις του Debian να " "προσδιορίζουν το δικό τους κωδικό όνομα και στους χρήστες να αλλάζουν σ' " "αυτές με έναν ελεγχόμενο τρόπο. Το κομμάτι /./ " "χρησιμοποιείται σαν ένδειξη μιας ρίζας, σε σχέση με την οποία να μπορούν να " "αγκιστρώνονται άλλες διαδρομές στο σύστημα αρχείων που ακολουθούν (για χρήση " "με τα preseed/include και preseed/run). Αυτό επιτρέπει τον προσδιορισμό " "αρχείων σαν πλήρεις διευθύνσεις URL, και διαδρομές που ξεκινούν με / " "αγκιστρώνονται κατ' αυτόν τον τρόπο, ή ακόμα και σαν διαδρομές σχετικά με " "την τοποθεσία όπου βρέθηκε το τελευταίο αρχείο προρύθμισης. Αυτό μπορεί να " "χρησιμοποιηθεί στην κατασκευή πιο \"φορητών\" σεναρίων (script) στα οποία " "μια ολόκληρη ιεραρχία σεναρίων μπορεί να μετακινηθεί σε μια καινούρια " "τοποθεσία χωρίς προβλήματα, για παράδειγμα με την αντιγραφή των αρχείων σε " "ένα stick USB ενώ αυτά προέρχονται από έναν εξυπηρετητή web. Στο παράδειγμα " "αυτό, αν το αρχείο προρύθμισης θέτει το preseed/run σαν " "/scripts/late_command.sh τότε το αρχείο θα ανακτηθεί από " "τη διεύθυνση http://autoserver.example.com/d-i/&releasename;/./" "scripts/late_command.sh." #. Tag: para #: preseed.xml:411 #, no-c-format msgid "" "If there is no local DHCP or DNS infrastructure, or if you do not want to " "use the default path to preseed.cfg, you can still use " "an explicit url, and if you don't use the /./ element it " "will be anchored to the start of the path (i.e. the third / in the URL). Here is an example that requires minimal support from " "the local network infrastructure: \n" "auto url=http://192.168.1.2/path/to/mypreseed.file\n" " The way this works is that:" msgstr "" "Αν δεν είναι διαθέσιμη μια τοπική υποδομή υπηρεσιών DNS ή DHCP, ή αν δεν " "θέλετε να χρησιμοποιήσετε την προκαθορισμένη διαδρομή στο preseed." "cfg, μπορείτε και πάλι να χρησιμοποιήσετε ένα συγκεκριμένο url, " "που αν δεν χρησιμοποιήσετε το κομμάτι /./ θα αγκιστρωθεί " "στην αρχή της διαδρομής (δηλ, το τρίτο / στο URL). Εδώ " "είναι ένα παράδειγμα που απαιτεί ελάχιστη υποστήριξη από την τοπική δικτυακή " "υποδομή:\n" "auto url=http://192.168.1.2/path/to/mypreseed.file\n" " Ο τρόπος με τον οποίο δουλεύει αυτό είναι:" #. Tag: para #: preseed.xml:424 #, no-c-format msgid "if the URL is missing a protocol, http is assumed," msgstr "" "αν στην διεύθυνση URL δεν υπάρχει κάποιο πρωτόκολλο, υποτίθεται ότι αυτό " "είναι το http," #. Tag: para #: preseed.xml:427 #, no-c-format msgid "" "if the hostname section contains no periods, it has the domain derived from " "DHCP appended to it, and" msgstr "" "αν το όνομα του μηχανήματος δεν περιέχει τελείες, τότε προσάπτεται σ' αυτό " "το όνομα τομέα που προκύπτει από το DHCP, και" #. Tag: para #: preseed.xml:431 #, no-c-format msgid "" "if there's no /'s after the hostname, then the default " "path is added." msgstr "" "αν δεν υπάρχει / μετά το όνομα του μηχανήματος, τότε " "προστίθεται η προκαθορισμένη διαδρομή." #. Tag: para #: preseed.xml:437 #, no-c-format msgid "" "In addition to specifying the url, you can also specify settings that do not " "directly affect the behavior of &d-i; itself, but can be passed through to " "scripts specified using preseed/run in the loaded preseed " "file. At present, the only example of this is auto-install/classes, which has an alias classes. This can be used " "thus: \n" "auto url=example.com classes=class_A;" "class_B\n" " The classes could for example denote the type of " "system to be installed, or the localization to be used." msgstr "" "Επιπρόσθετα από τον προσδιορισμό του url, μπορείτε ακόμα να προσδιορίσετε " "ρυθμίσεις που δεν επηρεάζουν άμεσα την συμπεριφορά του ίδιου του &d-i; αλλά " "μπορούν να περάσουν στα σενάρια που προσδιορίζονται με την χρήση του " "preseed/run στο αρχείο προρύθμισης που έχει ήδη φορτωθεί. " "Προς το παρόν, το μοναδικό παράδειγμα αυτής της κατάστασης είναι το " "auto-install/classes, με παρωνύμιο classes. Αυτό μπορεί να χρησιμοποιηθεί ως εξής:\n" "auto url=example.com classes=class_A;" "class_B\n" " Οι κλάσεις θα μπορούσαν να δηλώνουν για " "παράδειγμα τον τύπο του συστήματος που πρόκειται να εγκατασταθεί, ή τις " "τοπικές ρυθμίσεις που πρόκειται να χρησιμοποιηθούν." #. Tag: para #: preseed.xml:451 #, no-c-format msgid "" "It is of course possible to extend this concept, and if you do, it is " "reasonable to use the auto-install namespace for this. So one might have " "something like auto-install/style which is then used in " "your scripts. If you feel the need to do this, please mention it on the " "debian-boot@lists.debian.org mailing list so that we can " "avoid namespace conflicts, and perhaps add an alias for the parameter for " "you." msgstr "" "Φυσικά είναι δυνατόν να επεκτείνει κανείς αυτή την ιδέα, και αν κάνετε κάτι " "τέτοιο, είναι εύλογο να χρησιμοποιήσετε τον χώρο ονομασιών (namespace) auto-" "install για τον σκοπό αυτό. Έτσι μπορεί κανείς να έχει κάτι όπως το " "auto-install/style που στη συνέχεια να χρησιμοποιείται " "στα σενάριά του. Αν αισθάνεστε την ανάγκη να κάνετε κάτι τέτοιο, παρακαλούμε " "αναφέρετέ το στη λίστα αλληλογραφίας debian-boot@lists.debian.org ώστε να αποφύγουμε ασυμφωνίες στον χώρο ονομασιών και πιθανόν να " "προσθέσουμε ένα παρωνύμιο για την παράμετρο για λογαριασμό σας." #. Tag: para #: preseed.xml:461 #, no-c-format msgid "" "The auto boot label is not yet defined everywhere. The " "same effect may be achieved by simply adding the two parameters " "auto=true priority=critical to the kernel command line. " "The auto parameter is an alias for auto-install/" "enable and setting it to true delays the locale " "and keyboard questions until after there has been a chance to preseed them, " "while priority is an alias for debconf/priority and setting it to critical stops any questions " "with a lower priority from being asked." msgstr "" "Η επικεφαλίδα εκκίνησης auto δεν έχει ακόμα οριστεί " "παντού. Το ίδιο αποτέλεσμα μπορεί να επιτευχθεί όμως προσθέτοντας απλά τις " "δυο παραμέτρους auto=true priority=critical στη γραμμή " "εντολών του πυρήνα. Η παράμετρος auto είναι ένα παρωνύμιο " "για την auto-install/enable και η απόδοση της τιμής " "true έχει σαν αποτέλεσμα την καθυστέρηση της διατύπωσης " "των ερωτήσεων για τις τοπικές ρυθμίσεις και το πληκτρολόγιο μέχρι τη στιγμή " "που θα έχει δοθεί η δυνατότητα προρύθμισής τους, ενώ η παράμετρος " "priority είναι παρωνύμιο για την debconf/" "priority και ο καθορισμός της σε critical " "αποτρέπει την διατύπωση κάθε ερώτησης με χαμηλότερη προτεραιότητα." #. Tag: para #: preseed.xml:475 #, no-c-format msgid "" "Additional options that may be of interest while attempting to automate an " "install while using DHCP are: interface=auto netcfg/" "dhcp_timeout=60 which makes the machine choose the first viable " "NIC and be more patient about getting a reply to its DHCP query." msgstr "" "Επιπλέον επιλογές που μπορεί να έχουν ενδιαφέρον στην προσπάθεια " "αυτοματοποίησης μιας εγκατάστασης με χρήση της υπηρεσίας DHCP είναι: " "interface=auto netcfg/dhcp_timeout=60 που κάνει το " "μηχάνημα να διαλέξει την πρώτη διαθέσιμη διεπαφή δικτύου (NIC) και να είναι " "περισσότερο \"υπομονετικό\" όσον αφορά την λήψη μιας απάντησης στο αίτημά " "του προς τον εξυπηρετητή DHCP." #. Tag: para #: preseed.xml:484 #, no-c-format msgid "" "An extensive example of how to use this framework, including example scripts " "and classes, can be found on the website of its developer. The examples available there also show " "many other nice effects that can be achieved by creative use of " "preconfiguration." msgstr "" "Ένα εκτεταμένο παράγειγμα του πώς μπορείτε να χρησιμοποιήσετε αυτό το " "πλαίσιο, που συμπεριλαμβάνει παραδείγματα σεναρίων (script) και κλάσσεις, " "μπορεί να βρεθεί στον δικτυακό τόπο του " "προγραμματιστή. Τα παραδείγματα που δίνονται εκεί δείχνουν επίσης " "μερικά ακόμα χρήσιμα αποτελέσματα που μπορούν να επιτευχθούν μέσω της " "δημιουργικής χρήσης της προρύθμισης." #. Tag: title #: preseed.xml:495 #, no-c-format msgid "Aliases useful with preseeding" msgstr "Παρωνύμια χρήσιμα με την προρύθμιση" #. Tag: para #: preseed.xml:496 #, no-c-format msgid "" "The following aliases can be useful when using (auto mode) preseeding. Note " "that these are simply short aliases for question names, and you always need " "to specify a value as well: for example, auto=true or " "interface=eth0." msgstr "" "Τα παρακάτω ψευδώνυμα μπορεί να φανούν χρήσιμα όταν χρησιμοποιείτε " "προρύθμιση (κατάσταση αυτόματης εγκατάστασης). Σημειώστε ότι αυτά είναι απλά " "σύντομα ψευδώνυμα για ονόματα ερωτήσεων, και ότι θα πρέπει πάντα να " "προσδιορίζετε και μια τιμή: για παράδειγμα, auto=true or " "interface=eth0." #. Tag: entry #: preseed.xml:509 #, no-c-format msgid "auto" msgstr "auto" #. Tag: entry #: preseed.xml:509 #, no-c-format msgid "auto-install/enable" msgstr "auto-install/enable" #. Tag: entry #: preseed.xml:510 #, no-c-format msgid "classes" msgstr "classes" #. Tag: entry #: preseed.xml:510 #, no-c-format msgid "auto-install/classes" msgstr "auto-install/classes" #. Tag: entry #: preseed.xml:511 #, no-c-format msgid "fb" msgstr "fb" #. Tag: entry #: preseed.xml:511 #, no-c-format msgid "debian-installer/framebuffer" msgstr "debian-installer/framebuffer" #. Tag: entry #: preseed.xml:512 #, no-c-format msgid "locale" msgstr "locale" #. Tag: entry #: preseed.xml:512 #, no-c-format msgid "debian-installer/locale" msgstr "debian-installer/locale" #. Tag: entry #: preseed.xml:513 #, no-c-format msgid "priority" msgstr "priority" #. Tag: entry #: preseed.xml:513 #, no-c-format msgid "debconf/priority" msgstr "debconf/priority" #. Tag: entry #: preseed.xml:514 #, no-c-format msgid "preseed/file" msgstr "preseed/file" #. Tag: entry #: preseed.xml:515 #, no-c-format msgid "url" msgstr "url" #. Tag: entry #: preseed.xml:515 #, no-c-format msgid "preseed/url" msgstr "preseed/url" #. Tag: entry #: preseed.xml:516 #, no-c-format msgid "interface" msgstr "interface" #. Tag: entry #: preseed.xml:516 #, no-c-format msgid "netcfg/choose_interface" msgstr "netcfg/choose_interface" #. Tag: entry #: preseed.xml:517 #, no-c-format msgid "hostname   " msgstr "hostname   " #. Tag: entry #: preseed.xml:517 #, no-c-format msgid "netcfg/get_hostname" msgstr "netcfg/get_hostname" #. Tag: entry #: preseed.xml:518 #, no-c-format msgid "domain" msgstr "domain" #. Tag: entry #: preseed.xml:518 #, no-c-format msgid "netcfg/get_domain" msgstr "netcfg/get_domain" #. Tag: entry #: preseed.xml:519 #, no-c-format msgid "protocol" msgstr "protocol" #. Tag: entry #: preseed.xml:519 #, no-c-format msgid "mirror/protocol" msgstr "mirror/protocol" #. Tag: entry #: preseed.xml:520 #, no-c-format msgid "suite" msgstr "suite" #. Tag: entry #: preseed.xml:520 #, no-c-format msgid "mirror/suite" msgstr "mirror/suite" #. Tag: title #: preseed.xml:527 #, no-c-format msgid "Using a DHCP server to specify preconfiguration files" msgstr "Χρήση ενός εξυπηρετητή DHCP για τον προσδιορισμό αρχείων προρυθμίσεων" #. Tag: para #: preseed.xml:528 #, no-c-format msgid "" "It's also possible to use DHCP to specify a preconfiguration file to " "download from the network. DHCP allows specifying a filename. Normally this " "is a file to netboot, but if it appears to be an URL then installation media " "that support network preseeding will download the file from the URL and use " "it as a preconfiguration file. Here is an example of how to set it up in the " "dhcpd.conf for version 3 of the ISC DHCP server (the dhcp3-server Debian " "package)." msgstr "" "Είναι επίσης δυνατόν να χρησιμοποιήσετε το πρωτόκολλο DHCP για τον " "προσδιορισμό ενός αρχείου προρυθμίσεων και να το κατεβάσετε από το δίκτυο. " "Το DHCP επιτρέπει τον προσδιορισμό ενός ονόματος αρχείου. Συνήθως αυτό είναι " "ένα αρχείο για εκκίνηση από το δίκτυο, αν όμως εμφανίζεται να είναι μια " "διεύθυνση URL τότε τα μέσα εγκατάστασης που υποστηρίζουν προρύθμιση μέσω " "δικτύου θα κατεβάσουν το αρχείο από την διεύθυνση αυτή και θα το " "χρησιμοποιήσουν σαν αρχείο προρυθμίσεων. Εδώ είναι ένα παράδειγμα του πώς να " "κάνετε την αντίστοιχη ρύθμιση στο αρχείο dhcpd.conf για την έκδοση 3 του " "εξυπηρετητή DHCP του ISC (το πακέτο dhcp3-server στο Debian)." #. Tag: screen #: preseed.xml:539 #, no-c-format msgid "" "if substring (option vendor-class-identifier, 0, 3) = \"d-i\" {\n" " filename \"http://host/preseed.cfg\";\n" "}" msgstr "" "if substring (option vendor-class-identifier, 0, 3) = \"d-i\" {\n" " filename \"http://host/preseed.cfg\";\n" "}" #. Tag: para #: preseed.xml:541 #, no-c-format msgid "" "Note that the above example limits this filename to DHCP clients that " "identify themselves as \"d-i\", so it will not affect regular DHCP clients, " "but only the installer. You can also put the text in a stanza for only one " "particular host to avoid preseeding all installs on your network." msgstr "" "Σημειώστε ότι το προηγούμενο παράδειγμα περιορίζει το όνομα του αρχείου σε " "πελάτες DHCP που ταυτοποιούνται οι ίδιοι σαν \"d-i\", ώστε να μην " "επηρρεάζονται συνηθισμένοι πελάτες DHCP, αλλά μόνο ο εγκαταστάτης. Μπορείτε " "επίσης να βάλετε το κείμενο σε stanza μόνο για ένα συγκεκριμένο μηχάνημα για " "να αποφύγετε την εφαρμογή των προρυθμίσεων για όλες τις εγκαταστάσεις στο " "δίκτυό σας." #. Tag: para #: preseed.xml:548 #, no-c-format msgid "" "A good way to use the DHCP preseeding is to only preseed values specific to " "your network, such as the Debian mirror to use. This way installs on your " "network will automatically get a good mirror selected, but the rest of the " "installation can be performed interactively. Using DHCP preseeding to fully " "automate Debian installs should only be done with care." msgstr "" "Ένας καλός τρόπος να χρησιμοποιήσετε την μέθοδο προρύθμισης με χρήση DHCP " "είναι να προρυθμίσετε μόνο τις τιμές που έχουν να κάνουν με το δίκτυό σας, " "όπως για παράδειγμα τον καθρέφτη του Debian που θα χρησιμοποιήσετε. Με τον " "τρόπο αυτό οι εγκαταστάσεις στο δίκτυό σας θα έχουν προεπιλεγμένον έναν " "κατάλληλο καθρέφτη της αρχειοθήκης, ενώ το υπόλοιπο της εγκατάστασης μπορεί " "να πραγματοποιηθεί διαδραστικά. Η χρήση προρυθμίσεων μέσω DHCP για την πλήρη " "αυτοματοποίηση των εγκαταστάσεων του Debian θα πρέπει να γίνεται μόνο με " "προσοχή." #. Tag: title #: preseed.xml:562 #, no-c-format msgid "Creating a preconfiguration file" msgstr "Δημιουργία ενός αρχείου προρυθμίσεων" #. Tag: para #: preseed.xml:563 #, no-c-format msgid "" "The preconfiguration file is in the format used by the debconf-set-" "selections command. The general format of a line in a " "preconfiguration file is:" msgstr "" "Το αρχείο των προρυθμίσεων είναι στην μορφή που χρησιμοποιείται από την " "εντολή debconf-set-selections. H γενική μορφή μιας " "γραμμής σε ένα αρχείο προρυθμίσεων είναι:" #. Tag: screen #: preseed.xml:569 #, no-c-format msgid "<owner> <question name> <question type> <value>" msgstr "" "<owner> <question name> <question type> <value>" #. Tag: para #: preseed.xml:571 #, no-c-format msgid "" "There are a few rules to keep in mind when writing a preconfiguration file." msgstr "" "Υπάρχουν μερικοί κανόνες που θα πρέπει να έχετε στο μυαλό σας όταν γράφετε " "ένα αρχείο προρύθμισης." #. Tag: para #: preseed.xml:578 #, no-c-format msgid "" "Put only a single space or tab between type and value: any additional " "whitespace will be interpreted as belonging to the value." msgstr "" "Εισάγετε ένα μοναδικό κενό (space) ή μια μοναδική μετατόπιση θέσης (tab) " "ανάμεσα σε έναν τύπο και την τιμή του: οποιοδήποτε επιπλέον κενό διάστημα " "(whitespace) θα ερμηνευθεί σαν να ανήκει στην τιμή." #. Tag: para #: preseed.xml:582 #, no-c-format msgid "" "A line can be split into multiple lines by appending a backslash " "(\\) as the line continuation character. A " "good place to split a line is after the question name; a bad place is " "between type and value. Split lines will be joined into a single line with " "all leading/trailing whitespace condensed to a single space." msgstr "" "Μια γραμμή μπορεί να χωριστεί σε πολλαπλές γραμμές με την προσθήκη στο τέλος " "του συμβόλου backslash (\\) σαν χαρακτήρα " "συνέχισης της γραμμής. Ένα καλό σημείο για να χωρίσετε μια γραμμή είναι " "αμέσως μετά το όνομα της ερώτησης. Ένα κακό σημείο είναι ανάμεσα σε έναν " "τύπο και την τιμή του. Οι χωριζόμενες γραμμές θα ενωθούν σε μια μοναδική " "γραμμή με όλα τα προηγούμενα/ακόλουθα κενά διαστήματα συγκολλούμεναν σε ένα " "μοναδικό διάστημα." #. Tag: para #: preseed.xml:589 #, no-c-format msgid "" "For debconf variables (templates) used in the installer itself, the owner " "should be set to d-i; to preseed variables used in the " "installed system, the name of the package that contains the corresponding " "debconf template should be used. Only variables that have their owner set to " "something other than d-i will be propagated to the debconf " "database for the installed system." msgstr "" "Για μεταβλητές (templates) του debconf που χρησιμοποιούνται στον ίδιο τον " "εγκαταστάτη, σαν ιδιοκτήτης θα πρέπει να τεθεί ο d-i; για την " "προρύθμιση μεταβλητών που χρησιμοποιούνται στο εγκατεστημένο σύστημα θα " "πρέπει να χρησιμοποιηθεί το όνομα του πακέτου που περιέχει το αντίστοιχο " "υπόδειγμα του debconf. Μόνο μεταβλητές για τις οποίες έχει καθοριστεί " "ιδιοκτήτης διαφορετικός από τον d-i θα μεταδοθούν στην βάση " "δεδομένων του debconf για το εγκατεστημένο σύστημα." #. Tag: para #: preseed.xml:597 #, no-c-format msgid "" "Most questions need to be preseeded using the values valid in English and " "not the translated values. However, there are some questions (for example in " "partman) where the translated values need to be used." msgstr "" "Οι περισσότερες ερωτήσεις θα πρέπει να προρυθμιστούν χρησιμοποιώντας τις " "τιμές που είναι έγκυρες στα Αγγλικά και όχι μεταφράσεις τους. Παρ' όλα αυτά " "υπάρχουν μερικές ερωτήσεις (για παράδειγμα για το πρόγραμμα " "partman) στις οποίες θα πρέπει να χρησιμοποιηθούν οι " "μεταφρασμένες τιμές." #. Tag: para #: preseed.xml:603 #, no-c-format msgid "" "Some questions take a code as value instead of the English text that is " "shown during installation." msgstr "" "Μερικές ερωτήσεις παίρνουν σαν τιμή έναν κωδικό αντί του αγγλικού κειμένου " "που εμφανίζεται κατά την εγκατάσταση." #. Tag: para #: preseed.xml:609 #, no-c-format msgid "" "The easiest way to create a preconfiguration file is to use the example file " "linked in as basis and work from there." msgstr "" "Ο ευκολότερος τρόπος να δημιουργήσετε ένα αρχείο προρύθμισης είναι να " "χρησιμοποιήσετε το παράδειγμα στον σύνδεσμο σαν βάση και να δουλέψετε πάνω σ' αυτό." #. Tag: para #: preseed.xml:614 #, no-c-format msgid "" "An alternative method is to do a manual installation and then, after " "rebooting, use the debconf-get-selections from the " "debconf-utils package to dump both the debconf " "database and the installer's cdebconf database to a single file:" msgstr "" "Μια εναλλακτική μέθοδος είναι να κάνετε μια εγκατάσταση με το χέρι και μετά, " "μετά την επανεκκίνηση, χρησιμοποιήστε την εντολή debconf-get-" "selections από το πακέτο debconf-utilsώστε " "να σώσετε σε ένα μοναδικό αρχείο τόσο την βάση δεδομένων του debconf όσο και " "αυτήν του cdebconf του εγκαταστάτη:" #. Tag: screen #: preseed.xml:621 #, no-c-format msgid "" "$ debconf-get-selections --installer > file\n" "$ debconf-get-selections >> file" msgstr "" "$ debconf-get-selections --installer > file\n" "$ debconf-get-selections >> file" #. Tag: para #: preseed.xml:623 #, no-c-format msgid "" "However, a file generated in this manner will have some items that should " "not be preseeded, and the example file is a better starting place for most " "users." msgstr "" "Παρ' όλα αυτά, ένα αρχείο που δημιουργείται μ' αυτόν τον τρόπο θα περιέχει " "κάποια στοιχεία που δεν θα έπρεπε να προρυθμιστούν, και το παραδειγματικό " "αρχείο είναι ένα καλλίτερο σημείο εκκίνησης για τους περισσότερους χρήστες." #. Tag: para #: preseed.xml:631 #, no-c-format msgid "" "This method relies on the fact that, at the end of the installation, the " "installer's cdebconf database is saved to the installed system in /" "var/log/installer/cdebconf. However, because the database may " "contain sensitive information, by default the files are only readable by " "root." msgstr "" "Η μέθοδος αυτή στηρίζεται στο γεγονός ότι στο τέλος της εγκατάστασης η βάση " "δεδομένων του cdebconf σώζεται στο εγκατεστημένο σύστημα στο αρχείο " "/var/log/installer/cdebconf. Όμως κι επειδή η βάση αυτή " "μπορεί να περιέχει ευαίσθητες πληροφορίες, τα αρχεία είναι προκαθορισμένο να " "διαβάζονται μόνο από τον χρήστη root." #. Tag: para #: preseed.xml:639 #, no-c-format msgid "" "The directory /var/log/installer and all files in it " "will be deleted from your system if you purge the package " "installation-report." msgstr "" "Ο κατάλογος /var/log/installer και όλα τα αρχεία σ' " "αυτόν θα διαγραφούν από το σύστημά σας αν αφαιρέσετε πλήρως το πακέτο " "installation-report." #. Tag: para #: preseed.xml:647 #, no-c-format msgid "" "To check possible values for questions, you can use nano " "to examine the files in /var/lib/cdebconf while an " "installation is in progress. View templates.dat for the " "raw templates and questions.dat for the current values " "and for the values assigned to variables." msgstr "" "Για να ελέγξετε πιθανές τιμές για τις ερωτήσεις, μπορείτε να χρησιμοποιήσετε " "την εντολή nano για να εξετάσετε τα αρχεία στον κατάλογο " "/var/lib/cdebconf κι ενώ η εγκατάσταση είνα ακόμα σε " "εξέλιξη. Δείτε το αρχείο templates.dat για τα αρχικά " "πρότυπα (templates) και το αρχείο questions.dat για τις " "τρέχουσες τιμές και τις τιμές που έχουν δοθεί στις μεταβλητές." #. Tag: para #: preseed.xml:655 #, no-c-format msgid "" "To check if the format of your preconfiguration file is valid before " "performing an install, you can use the command debconf-set-" "selections -c preseed.cfg." msgstr "" "Για να ελέγξετε αν η μορφή του αρχείου προρύθμισης είναι έγκυρη πριν " "πραγματοποιήσετε μια εγκατάσταση, μπορείτε να χρησιμοποιήσετε την εντολή " "debconf-set-selections -c preseed.cfg." #. Tag: title #: preseed.xml:666 #, no-c-format msgid "Contents of the preconfiguration file (for &releasename;)" msgstr "Περιεχόμενα του αρχείου προρύθμισης (για την έκδοση &releasename;)" #. Tag: para #: preseed.xml:672 #, no-c-format msgid "" "Note that this example is based on an installation for the Intel x86 " "architecture. If you are installing a different architecture, some of the " "examples (like keyboard selection and bootloader installation) may not be " "relevant and will need to be replaced by debconf settings appropriate for " "your architecture." msgstr "" "Σημειώστε ότι αυτό το παράδειγμα βασίζεται σε μια εγκατάσταση για την " "αρχιτεκτονική Intel x86. Αν κάνετε εγκατάσταση σε μια άλλη αρχιτεκτονική, " "μερικά από τα παραδείγματα (όπως η επιλογή πληκτρολογίου και η εγκατάσταση " "του φορτωτή εκκίνησης) μπρορεί να μην είναι κατάλληλα ή σχετικά και θα " "πρέπει να αντικατασταθούν από ρυθμίσεις του debconf κατάλληλες για την " "αρχιτεκτονική σας." #. Tag: title #: preseed.xml:683 #, no-c-format msgid "Localization" msgstr "Τοπικοποίηση" #. Tag: para #: preseed.xml:684 #, no-c-format msgid "" "Setting localization values will only work if you are using initrd " "preseeding. With all other methods the preconfiguration file will only be " "loaded after these questions have been asked." msgstr "" "Η ρύθμιση των τιμών τοπικοποίησης θα δουλέψει μόνο αν χρησιμοποιείτε " "προρύθμιση με initrd. Με όλες τις άλλες μεθόδους το αρχείο προρύθμισης θα " "φορτωθεί μόνο μετά τη διατύπωση αυτών των ερωτήσεων." #. Tag: para #: preseed.xml:690 #, no-c-format msgid "" "The locale can be used to specify both language and country and can be any " "combination of a language supported by &d-i; and a recognized country. If " "the combination does not form a valid locale, the installer will " "automatically select a locale that is valid for the selected language. To " "specify the locale as a boot parameter, use " "locale=en_US." msgstr "" "Το σύνολο τοπικών ρυθμίσεων (locale) μπορεί να χρησιμοποιηθεί για να " "προσδιορίσετε τόσο την γλώσσα όσο και την χώρα και μπορεί να είναι " "οποιοσδήποτε συνδυασμός μιας γλώσσας που υποστηρίζεται από τον &d-i; και " "μιας αναγνωρισμένης χώρας. Αν ο συνδυασμός δεν σχηματίζει ένα έγκυρο σύνολο " "τοπικών ρυθμίσεων, ο εγκαταστάτης θα επιλέξει αυτόματα ένα σύνολο που είναι " "έγκυρο για την επιλεγμένη γλώσσα. Για να ορίσετε το σύνολο αυτό σαν " "παράμετρο εκκίνησης, χρησιμοποιήστε πχ. " "locale=en_US." #. Tag: screen #: preseed.xml:699 #, no-c-format msgid "" "# Locale sets language and country.\n" "d-i debian-installer/locale string en_US" msgstr "" "#Tο locale ορίζει την γλώσσα και την χώρα.\n" "d-i debian-installer/locale string en_US" #. Tag: para #: preseed.xml:701 #, no-c-format msgid "" "Keyboard configuration consists of selecting a keyboard architecture and a " "keymap. In most cases the correct keyboard architecture is selected by " "default, so there's normally no need to preseed it. The keymap must be known " "to the &d-i; for the selected keyboard architecture." msgstr "" "Η ρύθμιση του πληκτρολογίου συνίσταται στην επιλογή μιας αρχιτεκτονικής " "πληκτρολογίου κι ενός \"χάρτη\" πληκτρολογίου. Στις περισσότερες περιπτώσεις " "η σωστή αρχιτεκτονική για το πληκτρολόγιο επιλέγεται εξ' ορισμού, οπότε " "συνήθως δεν υπάρχει ανάγκη να κάνετε μια προρύθμιση γι' αυτό. Ο χάρτης για " "την αρχιτεκτονική που έχει επιλεγεί θα πρέπει να είναι γνωστός στον &d-i;." #. Tag: screen #: preseed.xml:708 #, no-c-format msgid "" "# Keyboard selection.\n" "#d-i console-tools/archs select at\n" "d-i console-keymaps-at/keymap select us\n" "# Example for a different keyboard architecture\n" "#d-i console-keymaps-usb/keymap select mac-usb-us" msgstr "" "# Επιλογή πληκτρολογίου.\n" "#d-i console-tools/archs select at\n" "d-i console-keymaps-at/keymap select us\n" "# Παράδειγμα για μια διαφορετική αρχιτεκτονική πληκτρολογίου\n" "#d-i console-keymaps-usb/keymap select mac-usb-us" #. Tag: para #: preseed.xml:710 #, no-c-format msgid "" "To skip keyboard configuration, preseed console-tools/archs with skip-config. This will result in the " "kernel keymap remaining active." msgstr "" "Για να παρακάμψετε την ρύθμιση του πληκτρολογίου προρυθμίστε το " "console-tools/archs σαν skip-config. Αυτό θα έχει σαν αποτέλεσμα να παραμείνει ενεργό το keymap του " "πυρήνα." #. Tag: para #: preseed.xml:719 #, no-c-format msgid "" "The changes in the input layer for 2.6 kernels have made the keyboard " "architecture virtually obsolete. For 2.6 kernels normally a PC (at) keymap should be selected." msgstr "" "Οι αλλαγές στο \"στρώμα εισόδου\" (input layer) για πυρήνες 2.6 έχουν " "καταστήσει την αρχιτεκτονική του πληκτρολογίου ουσιαστικά παρωχημένη. Για " "πυρήνες 2.6 θα πρέπει συνήθως να επιλέξετε ένα keymap τύπου PC (at)." #. Tag: title #: preseed.xml:729 #, no-c-format msgid "Network configuration" msgstr "Ρύθμιση δικτύου" #. Tag: para #: preseed.xml:730 #, no-c-format msgid "" "Of course, preseeding the network configuration won't work if you're loading " "your preconfiguration file from the network. But it's great when you're " "booting from CD or USB stick. If you are loading preconfiguration files from " "the network, you can pass network config parameters by using kernel boot " "parameters." msgstr "" "Φυσικά, προρύθμιση της διαμόρφωσης του δικτύου δεν θα δουλέψει αν φορτώνετε " "το αρχείο προρύθμισης από το δίκτυο. Είναι όμως σπουδαίο αν εκκινείτε από " "ένα CD ή ένα stick USB. Αν φορτώνετε αρχεία προρύθμισης από το δίκτυο, " "μπορείτε να περάσετε παραμέτρους ρύθμισης του δικτύου χρησιμοποιώντας " "παραμέτρους εκκίνησης του πυρήνα." #. Tag: para #: preseed.xml:738 #, no-c-format msgid "" "If you need to pick a particular interface when netbooting before loading a " "preconfiguration file from the network, use a boot parameter such as " "interface=eth1." msgstr "" "Αν είναι απαραίτητο να διαλέξετε μια συγκεκριμένη διεπαφή δικτύου κατά την " "εκκίνηση από δίκτυο και πριν από την φόρτωση ενός αρχείου προρύθμισης από " "αυτό, χρησιμοποιείστε μια παράμετρο εκκίνησης όπως η " "interface=eth1." #. Tag: para #: preseed.xml:744 #, no-c-format msgid "" "Although preseeding the network configuration is normally not possible when " "using network preseeding (using preseed/url), you can use the " "following hack to work around that, for example if you'd like to set a " "static address for the network interface. The hack is to force the network " "configuration to run again after the preconfiguration file has been loaded " "by creating a preseed/run script containing the following " "commands:" msgstr "" "Αν και η προρύθμιση της διαμόρφωσης του δικτύου δεν είναι συνήθως δυνατή " "όταν χρησιμοποιείτε προρύθμιση μέσω δικτύου (χρησιμοποιώντας το " "preseed/url), μπορείτε να χρησιμοποιήσετε το ακόλουθο \"κόλπο" "\" για να παρακάμψετε αυτή τη δυσκολία, πχ. αν θέλετε να ορίσετε μια στατική " "διεύθυνση για την δικτυακή σας διεπαφή. Το \"κόλπο\" είναι να αναγκάσετε και " "πάλι τη διαμόρφωση του δικτύου μετά την φόρτωση του αρχείου προρυθμίσεων " "δημιουργώντας ένα σενάριο preseed/run που να περιέχει τις " "ακόλουθες εντολές:" #. Tag: screen #: preseed.xml:754 #, no-c-format msgid "killall.sh; netcfg" msgstr "killall.sh; netcfg" #. Tag: para #: preseed.xml:756 #, no-c-format msgid "The following debconf variables are relevant for network configuration." msgstr "" "Οι επόμενες μεταβλητές του debconf είναι συναφείς με την ρύθμιση του δικτύου." #. Tag: screen #: preseed.xml:762 #, fuzzy, no-c-format #| msgid "" #| "# netcfg will choose an interface that has link if possible. This makes " #| "it\n" #| "# skip displaying a list if there is more than one interface.\n" #| "d-i netcfg/choose_interface select auto\n" #| "\n" #| "# To pick a particular interface instead:\n" #| "#d-i netcfg/choose_interface select eth1\n" #| "\n" #| "# If you have a slow dhcp server and the installer times out waiting for\n" #| "# it, this might be useful.\n" #| "#d-i netcfg/dhcp_timeout string 60\n" #| "\n" #| "# If you prefer to configure the network manually, uncomment this line " #| "and\n" #| "# the static network configuration below.\n" #| "#d-i netcfg/disable_dhcp boolean true\n" #| "\n" #| "# If you want the preconfiguration file to work on systems both with and\n" #| "# without a dhcp server, uncomment these lines and the static network\n" #| "# configuration below.\n" #| "#d-i netcfg/dhcp_failed note\n" #| "#d-i netcfg/dhcp_options select Configure network manually\n" #| "\n" #| "# Static network configuration.\n" #| "#d-i netcfg/get_nameservers string 192.168.1.1\n" #| "#d-i netcfg/get_ipaddress string 192.168.1.42\n" #| "#d-i netcfg/get_netmask string 255.255.255.0\n" #| "#d-i netcfg/get_gateway string 192.168.1.1\n" #| "#d-i netcfg/confirm_static boolean true\n" #| "\n" #| "# Any hostname and domain names assigned from dhcp take precedence over\n" #| "# values set here. However, setting the values still prevents the " #| "questions\n" #| "# from being shown, even if values come from dhcp.\n" #| "d-i netcfg/get_hostname string unassigned-hostname\n" #| "d-i netcfg/get_domain string unassigned-domain\n" #| "\n" #| "# Disable that annoying WEP key dialog.\n" #| "d-i netcfg/wireless_wep string\n" #| "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n" #| "#d-i netcfg/dhcp_hostname string radish\n" #| "\n" #| "# If non-free firmware is needed for the network or other hardware, you " #| "can\n" #| "# configure the installer to always try to load it, without prompting. " #| "Or\n" #| "# change to false to disable asking.\n" #| "#d-i hw-detect/load_firmware boolean true" msgid "" "# Disable network configuration entirely. This is useful for cdrom\n" "# installations on non-networked devices where the network questions,\n" "# warning and long timeouts are a nuisance.\n" "#d-i netcfg/enable boolean false\n" "\n" "# netcfg will choose an interface that has link if possible. This makes it\n" "# skip displaying a list if there is more than one interface.\n" "d-i netcfg/choose_interface select auto\n" "\n" "# To pick a particular interface instead:\n" "#d-i netcfg/choose_interface select eth1\n" "\n" "# If you have a slow dhcp server and the installer times out waiting for\n" "# it, this might be useful.\n" "#d-i netcfg/dhcp_timeout string 60\n" "\n" "# If you prefer to configure the network manually, uncomment this line and\n" "# the static network configuration below.\n" "#d-i netcfg/disable_dhcp boolean true\n" "\n" "# If you want the preconfiguration file to work on systems both with and\n" "# without a dhcp server, uncomment these lines and the static network\n" "# configuration below.\n" "#d-i netcfg/dhcp_failed note\n" "#d-i netcfg/dhcp_options select Configure network manually\n" "\n" "# Static network configuration.\n" "#d-i netcfg/get_nameservers string 192.168.1.1\n" "#d-i netcfg/get_ipaddress string 192.168.1.42\n" "#d-i netcfg/get_netmask string 255.255.255.0\n" "#d-i netcfg/get_gateway string 192.168.1.1\n" "#d-i netcfg/confirm_static boolean true\n" "\n" "# Any hostname and domain names assigned from dhcp take precedence over\n" "# values set here. However, setting the values still prevents the questions\n" "# from being shown, even if values come from dhcp.\n" "d-i netcfg/get_hostname string unassigned-hostname\n" "d-i netcfg/get_domain string unassigned-domain\n" "\n" "# Disable that annoying WEP key dialog.\n" "d-i netcfg/wireless_wep string\n" "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n" "#d-i netcfg/dhcp_hostname string radish\n" "\n" "# If non-free firmware is needed for the network or other hardware, you can\n" "# configure the installer to always try to load it, without prompting. Or\n" "# change to false to disable asking.\n" "#d-i hw-detect/load_firmware boolean true" msgstr "" "# Το netcfg θα επιλέξει αν είναι δυνατόν μια διεπαφή δικτύου με ενεργή " "σύνδεση. Αυτό έχει σαν αποτέλεσμα\n" "# την αποφυγή εμφάνισης μιας λίστας αν υπάρχουν περισσότερες από μια " "διεπαφές δικτύου.\n" "d-i netcfg/choose_interface select auto\n" "\n" "#Αντίθετα, για να επιλέξετε μια συγκεκριμένη διεπαφή δικτύου:\n" "#d-i netcfg/choose_interface select eth1\n" "\n" "# Αν έχετε έναν αργό εξυπηρετητή dhcp και ο εγκαταστάτης εξαντλεί το χρονικό " "περιθώριο περιμένοντάς τον\n" "# αυτό μπορεί να είναι χρήσιμο.\n" "#d-i netcfg/dhcp_timeout string 60\n" "\n" "# Αν προτιμάτε να ρυθμίσετε το δίκτυο με το χέρι, αποσχολιάστε την επόμενη " "γραμμή καθώς και\n" "# τις ρυθμίσεις του στατικού δικτύου παρακάτω.\n" "#d-i netcfg/disable_dhcp boolean true\n" "# Αν θέλετε το αρχείο προρυθμίσεων να δουλεύει σε συστήματα# τόσο με\n" "# όσο και χωρίς έναν εξυπηρετητή dhcp, αποσχολιάστε αυτές τις γραμμές και " "τις ρυθμίσεις\n" "# του στατικού δικτύου παρακάτω.\n" "#d-i netcfg/dhcp_failed note\n" "#d-i netcfg/dhcp_options select Configure network manually\n" "\n" "# Ρυθμίσεις στατικού δικτύου.\n" "#d-i netcfg/get_nameservers string 192.168.1.1\n" "#d-i netcfg/get_ipaddress string 192.168.1.42\n" "#d-i netcfg/get_netmask string 255.255.255.0\n" "#d-i netcfg/get_gateway string 192.168.1.1\n" "#d-i netcfg/confirm_static boolean true\n" "\n" "# Όποια ονόματα συστήματος και ονόματα τομέων δικτύου αποδίδονται από τον " "εξυπηρετητή dhcp έχουν προτεραιότητα από τις\n" "# τιμές που ορίζονται εδώ. Όμως ο καθορισμός των τιμών # εξακολουθεί να " "αποτρέπει την εμφάνιση των ερωτήσεων\n" "# ακόμα κι αν οι τιμές προέρχονται από τον εξυπηρετητή dhcp.\n" "d-i netcfg/get_hostname string unassigned-hostname\n" "d-i netcfg/get_domain string unassigned-domain\n" "\n" "# Απενεργοποίηση του ενοχλητικού διαλόγου για το κλειδί WEP.\n" "d-i netcfg/wireless_wep string\n" "# Tο wacky dhcp όνομα συστήματος που μερικοί ISP χρησιμοποιούν σαν " "συνθηματικό κάποιου είδους.\n" "#d-i netcfg/dhcp_hostname string radish\n" "# Αν απαιτείται κάποιο μη-ελεύθερο firmware για το δίκτυο ή άλλου είδους " "υλικό, μπορείτε να\n" "# ρυθμίσετε τον εγκαταστάτη ώστε να προσπαθεί πάντα για την φόρτωσή του, " "χωρίς κάποια προτροπή. Ή\n" "# αλλάξτε την τιμή σε false για να απενεργοποιήσετε την διατύπωση της " "ερώτησης.\n" "#d-i hw-detect/load_firmware boolean true" #. Tag: para #: preseed.xml:764 #, no-c-format msgid "" "Please note that netcfg will automatically determine the " "netmask if netcfg/get_netmask is not preseeded. In " "this case, the variable has to be marked as seen for " "automatic installations. Similarly, netcfg will choose an " "appropriate address if netcfg/get_gateway is not set. " "As a special case, you can set netcfg/get_gateway to " "none to specify that no gateway should be used." msgstr "" "Παρακαλώ σημειώστε ότι η εντολή netcfg θα προσδιορίσει " "αυτόματα την μάσκα δικτύου αν δεν έχει προρυθμιστεί η τιμή της " "netcfg/get_netmask. Στην περίπτωση αυτή και για " "αυτοματοποιημένες εγκαταστάσεις η μεταβλητή θα πρέπει να επισημανθεί ως " "seen. Ανάλογα, η εντολή netcfg θα " "επιλέξει μια κατάλληλη διεύθυνση αν δεν έχει οριστεί η netcfg/" "get_gateway. Σαν μια ειδική περίπτωση, μπορείτε να θέσετε την " "netcfg/get_gateway σε none για να " "προσδιορίσετε συγκεκριμένα ότι δεν θα χρησιμοποιηθεί κάποια δικτυακή πύλη." #. Tag: title #: preseed.xml:780 #, no-c-format msgid "Network console" msgstr "Κονσόλα δικτύου" #. Tag: screen #: preseed.xml:782 #, no-c-format msgid "" "# Use the following settings if you wish to make use of the network-console\n" "# component for remote installation over SSH. This only makes sense if you\n" "# intend to perform the remainder of the installation manually.\n" "#d-i anna/choose_modules string network-console\n" "#d-i network-console/password password r00tme\n" "#d-i network-console/password-again password r00tme" msgstr "" "# Χρησιμοποιήστε τις ακόλουθες ρυθμίσεις αν επιθυμείτε να κάνετε χρήση του " "συστατικού κονσόλα-δικτύου\n" "# για απομακρυσμένη εγκατάσταση πάνω από SSH. Αυτό έχει νόημα μόνο αν\n" "# σκοπεύετε να κάνετε την υπόλοιπη εγκατάσταση με το χέρι.\n" "#d-i anna/choose_modules string network-console\n" "#d-i network-console/password password r00tme\n" "#d-i network-console/password-again password r00tme" #. Tag: title #: preseed.xml:787 #, no-c-format msgid "Mirror settings" msgstr "Ρυθμίσεις καθρέφτη της αρχειοθήκης του Debian" #. Tag: para #: preseed.xml:788 #, no-c-format msgid "" "Depending on the installation method you use, a mirror may be used to " "download additional components of the installer, to install the base system, " "and to set up the /etc/apt/sources.list for the " "installed system." msgstr "" "Ανάλογα με την μέθοδο εγκατάστασης που χρησιμοποιείτε, ίσως χρησιμοποιηθεί " "ένας καθρέφτης της αρχειοθήκης για το κατέβασμα πρόσθετων συστατικών του " "εγκαταστάτη, την εγκατάσταση του βασικού συστήματος και την ρύθμιση του " "αρχείου /etc/apt/sources.list για το εγκατεστημένο " "σύστημα." #. Tag: para #: preseed.xml:795 #, no-c-format msgid "" "The parameter mirror/suite determines the suite for " "the installed system." msgstr "" "Η παράμετρος mirror/suite καθορίζει την σουίτα " "λογισμικού για το εγκατεστημένο σύστημα." #. Tag: para #: preseed.xml:800 #, no-c-format msgid "" "The parameter mirror/udeb/suite determines the suite " "for additional components for the installer. It is only useful to set this " "if components are actually downloaded over the network and should match the " "suite that was used to build the initrd for the installation method used for " "the installation. By default the value for mirror/udeb/suite is the same as mirror/suite." msgstr "" "Η παράμετρος mirror/udeb/suite καθορίζει την σουίτα " "για επιπρόσθετα συστατικά για τον εγκαταστάτη. Η ρύθμισή της είναι χρήσιμη " "μόνο αν τα συστατικά πρέπει όντως να \"κατέβουν\" από το δίκτυο και θα " "πρέπει να ταιριάζουν με την σουίτα που χρησιμοποιήθηκε για την δημιουργία " "του δίσκου initrd για την μέθοδο που χρησιμοποιήθηκε για την εγκατάσταση. " "Εξ' ορισμού η τιμή για την mirror/udeb/suite είναι η " "ίδια με αυτή για την mirror/suite." #. Tag: screen #: preseed.xml:812 #, no-c-format msgid "" "# If you select ftp, the mirror/country string does not need to be set.\n" "#d-i mirror/protocol string ftp\n" "d-i mirror/country string manual\n" "d-i mirror/http/hostname string &archive-mirror;\n" "d-i mirror/http/directory string /debian\n" "d-i mirror/http/proxy string\n" "\n" "# Suite to install.\n" "#d-i mirror/suite string testing\n" "# Suite to use for loading installer components (optional).\n" "#d-i mirror/udeb/suite string testing" msgstr "" "# Αν επιλέξετε ftp, δεν είναι απαραίτητο να ορίσετε τη συμβολοσειρά mirror/" "country.\n" "#d-i mirror/protocol string ftp\n" "d-i mirror/country string manual\n" "d-i mirror/http/hostname string &archive-mirror;\n" "d-i mirror/http/directory string /debian\n" "d-i mirror/http/proxy string\n" "\n" "# Διανομή για εγκατάσταση.\n" "#d-i mirror/suite string testing\n" "# Διανομή που θα χρησιμοποιηθεί για την φόρτωση των συστατικών του " "εγκαταστάτη (προαιρετικά).\n" "#d-i mirror/udeb/suite string testing" #. Tag: title #: preseed.xml:817 #, no-c-format msgid "Clock and time zone setup" msgstr "Ρύθμιση ρολογιού και χρονικής ζώνης" #. Tag: screen #: preseed.xml:819 #, no-c-format msgid "" "# Controls whether or not the hardware clock is set to UTC.\n" "d-i clock-setup/utc boolean true\n" "\n" "# You may set this to any valid setting for $TZ; see the contents of\n" "# /usr/share/zoneinfo/ for valid values.\n" "d-i time/zone string US/Eastern\n" "\n" "# Controls whether to use NTP to set the clock during the install\n" "d-i clock-setup/ntp boolean true\n" "# NTP server to use. The default is almost always fine here.\n" "#d-i clock-setup/ntp-server string ntp.example.com" msgstr "" "# Ελέγχει αν το ρολόι του υπολογιστή σας είναι ρυθμισμένο ή όχι σε UTC.\n" "d-i clock-setup/utc boolean true\n" "\n" "# Μπορείτε να ορίσετε οποιαδήποτε έγκυρη ρύθμιση για την $TZ; δείτε τα " "περιεχόμενα του\n" "# /usr/share/zoneinfo/ για έγκυρες τιμές.\n" "d-i time/zone string US/Eastern\n" "\n" "# Ελέγχει αν θα χρησιμοποιηθεί το πρωτόκολλο NTP για την ρύθμιση του " "ρολογιού στη διάρκεια της εγκατάστασης\n" "d-i clock-setup/ntp boolean true\n" "# Ο εξυπηρετητής NTP που θα χρησιμοποιηθεί . Ο προκαθορισμένος είναι σχεδόν " "πάντα μια καλή επιλογή εδώ.\n" "#d-i clock-setup/ntp-server string ntp.example.com" #. Tag: title #: preseed.xml:824 #, no-c-format msgid "Partitioning" msgstr "Διαμέριση" #. Tag: para #: preseed.xml:825 #, no-c-format msgid "" "Using preseeding to partition the harddisk is very much limited to what is " "supported by partman-auto. You can choose to " "partition either existing free space on a disk or a whole disk. The layout " "of the disk can be determined by using a predefined recipe, a custom recipe " "from a recipe file or a recipe included in the preconfiguration file. It is " "currently not possible to partition multiple disks using preseeding." msgstr "" "Η χρήση preseeding για την διαμέριση του σκληρού δίσκου είναι ιδιαίτερα " "περιορισμένο σε ό,τι υποστηρίζει το πρόγραμμα partman-auto. Μπορείτε να επιλέξετε την διαμέριση είτε του υπάρχοντος " "ελεύθερου χώρου σ' έναν δίσκο είτε ενός ολόκληρου δίσκου. Η διάταξη του " "δίσκου μπορεί να προσδιοριστεί χρησιμοποιώντας μια προκαθορισμένη ή μια δική " "σας \"συνταγή\" από ένα σχετικό αρχείο ή μια \"συνταγή\" που " "συμπεριλαμβάνεται στο αρχείο προρυθμίσεων. Προς το παρόν δεν είναι δυνατή η " "διαμέριση πολλών δίσκων με χρήση προρύθμισης." #. Tag: para #: preseed.xml:836 #, no-c-format msgid "" "The identification of disks is dependent on the order in which their drivers " "are loaded. If there are multiple disks in the system, make very sure the " "correct one will be selected before using preseeding." msgstr "" "Η ταυτοποίηση των δίσκων εξαρτάται από την σειρά με την οποίαν φορτώνονται " "οι οδηγοί τους. Αν υπάρχουν πολλαπλοί δίσκοι στο σύστημα, βεβαιωθείτε ότι θα " "επιλεχθεί ο σωστός πριν να χρησιμοποιήσετε preseeding." #. Tag: screen #: preseed.xml:844 #, fuzzy, no-c-format #| msgid "" #| "# If the system has free space you can choose to only partition that " #| "space.\n" #| "#d-i partman-auto/init_automatically_partition select biggest_free\n" #| "\n" #| "# Alternatively, you can specify a disk to partition. The device name " #| "must\n" #| "# be given in traditional non-devfs format.\n" #| "# Note: A disk must be specified, unless the system has only one disk.\n" #| "# For example, to use the first SCSI/SATA hard disk:\n" #| "#d-i partman-auto/disk string /dev/sda\n" #| "# In addition, you'll need to specify the method to use.\n" #| "# The presently available methods are: \"regular\", \"lvm\" and \"crypto" #| "\"\n" #| "d-i partman-auto/method string lvm\n" #| "\n" #| "# If one of the disks that are going to be automatically partitioned\n" #| "# contains an old LVM configuration, the user will normally receive a\n" #| "# warning. This can be preseeded away...\n" #| "d-i partman-lvm/device_remove_lvm boolean true\n" #| "# The same applies to pre-existing software RAID array:\n" #| "d-i partman-md/device_remove_md boolean true\n" #| "# And the same goes for the confirmation to write the lvm partitions.\n" #| "d-i partman-lvm/confirm boolean true\n" #| "\n" #| "# You can choose one of the three predefined partitioning recipes:\n" #| "# - atomic: all files in one partition\n" #| "# - home: separate /home partition\n" #| "# - multi: separate /home, /usr, /var, and /tmp partitions\n" #| "d-i partman-auto/choose_recipe select atomic\n" #| "\n" #| "# Or provide a recipe of your own...\n" #| "# The recipe format is documented in the file devel/partman-auto-recipe." #| "txt.\n" #| "# If you have a way to get a recipe file into the d-i environment, you " #| "can\n" #| "# just point at it.\n" #| "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n" #| "\n" #| "# If not, you can put an entire recipe into the preconfiguration file in " #| "one\n" #| "# (logical) line. This example creates a small /boot partition, suitable\n" #| "# swap, and uses the rest of the space for the root partition:\n" #| "#d-i partman-auto/expert_recipe string \\\n" #| "# boot-root :: \\\n" #| "# 40 50 100 ext3 \\\n" #| "# $primary{ } $bootable{ } \\\n" #| "# method{ format } format{ } \\\n" #| "# use_filesystem{ } filesystem{ ext3 } \\\n" #| "# mountpoint{ /boot } \\\n" #| "# . \\\n" #| "# 500 10000 1000000000 ext3 \\\n" #| "# method{ format } format{ } \\\n" #| "# use_filesystem{ } filesystem{ ext3 } \\\n" #| "# mountpoint{ / } \\\n" #| "# . \\\n" #| "# 64 512 300% linux-swap \\\n" #| "# method{ swap } format{ } \\\n" #| "# .\n" #| "\n" #| "# This makes partman automatically partition without confirmation, " #| "provided\n" #| "# that you told it what to do using one of the methods above.\n" #| "d-i partman-partitioning/confirm_write_new_label boolean true\n" #| "d-i partman/choose_partition select finish\n" #| "d-i partman/confirm boolean true" msgid "" "# If the system has free space you can choose to only partition that space.\n" "# This is only honoured if partman-auto/method (below) is not set.\n" "#d-i partman-auto/init_automatically_partition select biggest_free\n" "\n" "# Alternatively, you can specify a disk to partition. The device name must\n" "# be given in traditional non-devfs format.\n" "# Note: A disk must be specified, unless the system has only one disk.\n" "# For example, to use the first SCSI/SATA hard disk:\n" "#d-i partman-auto/disk string /dev/sda\n" "# In addition, you'll need to specify the method to use.\n" "# The presently available methods are: \"regular\", \"lvm\" and \"crypto\"\n" "d-i partman-auto/method string lvm\n" "\n" "# If one of the disks that are going to be automatically partitioned\n" "# contains an old LVM configuration, the user will normally receive a\n" "# warning. This can be preseeded away...\n" "d-i partman-lvm/device_remove_lvm boolean true\n" "# The same applies to pre-existing software RAID array:\n" "d-i partman-md/device_remove_md boolean true\n" "# And the same goes for the confirmation to write the lvm partitions.\n" "d-i partman-lvm/confirm boolean true\n" "\n" "# You can choose one of the three predefined partitioning recipes:\n" "# - atomic: all files in one partition\n" "# - home: separate /home partition\n" "# - multi: separate /home, /usr, /var, and /tmp partitions\n" "d-i partman-auto/choose_recipe select atomic\n" "\n" "# Or provide a recipe of your own...\n" "# The recipe format is documented in the file devel/partman-auto-recipe." "txt.\n" "# If you have a way to get a recipe file into the d-i environment, you can\n" "# just point at it.\n" "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n" "\n" "# If not, you can put an entire recipe into the preconfiguration file in " "one\n" "# (logical) line. This example creates a small /boot partition, suitable\n" "# swap, and uses the rest of the space for the root partition:\n" "#d-i partman-auto/expert_recipe string \\\n" "# boot-root :: \\\n" "# 40 50 100 ext3 \\\n" "# $primary{ } $bootable{ } \\\n" "# method{ format } format{ } \\\n" "# use_filesystem{ } filesystem{ ext3 } \\\n" "# mountpoint{ /boot } \\\n" "# . \\\n" "# 500 10000 1000000000 ext3 \\\n" "# method{ format } format{ } \\\n" "# use_filesystem{ } filesystem{ ext3 } \\\n" "# mountpoint{ / } \\\n" "# . \\\n" "# 64 512 300% linux-swap \\\n" "# method{ swap } format{ } \\\n" "# .\n" "\n" "# This makes partman automatically partition without confirmation, provided\n" "# that you told it what to do using one of the methods above.\n" "d-i partman-partitioning/confirm_write_new_label boolean true\n" "d-i partman/choose_partition select finish\n" "d-i partman/confirm boolean true" msgstr "" "# Αν το σύστημα έχει ελεύθερο χώρο μπορείτε να επιλέξετε να διαμερίσετε μόνο " "αυτόν τον χώρο.\n" "#d-i partman-auto/init_automatically_partition select biggest_free\n" "\n" "# Εναλλακτικά μπορείτε να καθορίσετε έναν δίσκο για διαμέριση. Το όνομα της " "συσκευής θα πρέπει\n" "να δοθεί στην παραδοσιακή non-devfs μορφή.\n" "# Σημείωση: θα πρέπει να προσδιοριστεί ένας δίσκος εκτός κι αν το σύστημα " "έχει μόνο έναν δίσκο.\n" "# Για παράδειγμα, για να χρησιμοποιήσετε τον πρώτο SCSI/SATA δίσκο:\n" "#d-i partman-auto/disk string /dev/sda\n" "# Επιπρόσθετα, θα πρέπει να προσδιορίσετε και την μέθοδο πoυ θα " "χρησιμοποιήσετε.\n" "# Οι διαθέσιμες προς το παρόν μέθοδοι είναι: \"κανονική\", \"lvm\" και " "\"crypto\"\n" "d-i partman-auto/method string lvm\n" "\n" "# Αν ένας από τους δίσκους που πρόκειται να διαμεριστούν αυτόματα\n" "# περιέχει ήδη μια παλιότερη διαμόρφωση LVM, ο χρήστης θα δει κανονικά μια\n" "# προειδοποίηση. Αυτό μπορεί επίσης να αποφευχθεί με προρύθμιση...\n" "d-i partman-lvm/device_remove_lvm boolean true\n" "# Το ίδιο ισχύει και για προϋπάρχουσες συστοιχίες RAID λογισμικού:\n" "d-i partman-md/device_remove_md boolean true\n" "# Όπως και για την επιβεβαίωση της εγγραφής των κατατμήσεων lvm.\n" "d-i partman-lvm/confirm boolean true\n" "\n" "# Μπορείτε να διαλέξετε οποιαδήποτε από τις τρείς προκαθορισμένες συνταγές " "διαμέρισης:\n" "# - atomic: όλα τα αρχεία σε μία κατάτμηση\n" "# - home: ξεχωριστή κατάτμηση /home\n" "# - multi: ξεχωριστές κατατμήσεις /home, /usr, /var και /tmp\n" "d-i partman-auto/choose_recipe select atomic\n" "\n" "#Ή δώστε μια δική σας συνταγή...\n" "# Η μορφή της συνταγής τεκμηριώνεται στο αρχείο devel/partman-auto-recipe." "txt.\n" "# Αν έχετε τρόπο να βάλετε ένα αρχείο συνταγής στο περιβάλλον του d-i " "μπορείτε\n" "# απλά να υποδείξετε το αρχείο.\n" "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n" "\n" "# Αν όχι, μπορείτε να βάλετε μια ολόκληρη συνταγή στο αρχείο προρυθμίσεων σε " "μια\n" "# (λογική) γραμμή. Αυτό το παράδειγμα δημιουργεί μια μικρή κατάτμηση /boot, " "κατάλληλο χώρο\n" "# swap, και χρησιμοποιεί τον υπόλοιπο χώρο για την ριζική κατάτμηση:\n" "#d-i partman-auto/expert_recipe string \\\n" "# boot-root :: \\\n" "# 40 50 100 ext3 \\\n" "# $primary{ } $bootable{ } \\\n" "# method{ format } format{ } \\\n" "# use_filesystem{ } filesystem{ ext3 } \\\n" "# mountpoint{ /boot } \\\n" "# . \\\n" "# 500 10000 1000000000 ext3 \\\n" "# method{ format } format{ } \\\n" "# use_filesystem{ } filesystem{ ext3 } \\\n" "# mountpoint{ / } \\\n" "# . \\\n" "# 64 512 300% linux-swap \\\n" "# method{ swap } format{ } \\\n" "# .\n" "\n" "# Και το ακόλουθο προκαλεί την αυτόματη διαμέριση από το πρόγραμμα partman " "χωρίς επιβεβαίωση, εφόσον όμως\n" "# του έχετε υποδείξει τι να κάνει χρησιμοποιώντας μία από τις παραπάνω " "μεθόδους.\n" "d-i partman-partitioning/confirm_write_new_label boolean true\n" "d-i partman/choose_partition select finish\n" "d-i partman/confirm boolean true" #. Tag: title #: preseed.xml:849 #, no-c-format msgid "Partitioning using RAID" msgstr "Διαμέριση με χρήση RAID" #. Tag: para #: preseed.xml:850 #, no-c-format msgid "" "You can also use preseeding to set up partitions on software RAID arrays. " "Supported are RAID levels 0, 1, 5, 6 and 10, creating degraded arrays and " "specifying spare devices. If you are using RAID 1, you can preseed grub to " "install to all devices used in the array; see ." msgstr "" "Μπορείτε επίσης να χρησιμοποιήσετε την μέθοδο προρύθμισης για να " "διαμορφώσετε κατατμήσεις σε συστοιχίες RAID λογισμικού (software RAID). " "Υποστηρίζονται τα επίπεδα RAID 0, 1, 5, 6 και 10, η δημιουργία degraded " "συστοιχιών και ο προσδιορισμός εφεδρικών συσκευών. Αν χρησιμοποιείτε RAID 1 " "μπορείτε να προρυθμίσετε την εγκατάσταση του grub σε όλες τις συσκευές που " "χρησιμοποιούνται στη συστοιχία. Δείτε το ." #. Tag: para #: preseed.xml:860 #, no-c-format msgid "" "This type of automated partitioning is easy to get wrong. It is also " "functionality that receives relatively little testing from the developers of " "&d-i;. The responsibility to get the various recipes right (so they make " "sense and don't conflict) lies with the user. Check /var/log/" "syslog if you run into problems." msgstr "" "Είναι εύκολο να γίνει κάποιο λάθος με αυτόν τον τύπο αυτόματης διαμέρισης. " "Επίσης είναι η λειτουργικότητα που δοκιμάζεται σχετικά λιγότερο από τους " "προγραμματιστές του &d-i;. Η ευθύνη να γίνουν οι διάφορες συνταγές με σωστό " "τρόπο (ώστε να έχουν νόημα και να μην οδηγούν σε αντιφάσεις) ανήκει στον " "ίδιο τον χρήστη. Ελέγξτε το /var/log/syslog αν " "αντιμετωπίσετε προβλήματα." #. Tag: screen #: preseed.xml:870 #, no-c-format msgid "" "# NOTE: this option is of beta release quality and should be used carefully\n" "\n" "# The method should be set to \"raid\".\n" "#d-i partman-auto/method string raid\n" "# Specify the disks to be partitioned. They will all get the same layout,\n" "# so this will only work if the disks are the same size.\n" "#d-i partman-auto/disk string /dev/sda /dev/sdb\n" "\n" "# Next you need to specify the physical partitions that will be used. \n" "#d-i partman-auto/expert_recipe string \\\n" "# multiraid :: \\\n" "# 1000 5000 4000 raid \\\n" "# $primary{ } method{ raid } \\\n" "# . \\\n" "# 64 512 300% raid \\\n" "# method{ raid } \\\n" "# . \\\n" "# 500 10000 1000000000 raid \\\n" "# method{ raid } \\\n" "# .\n" "\n" "# Last you need to specify how the previously defined partitions will be\n" "# used in the RAID setup. Remember to use the correct partition numbers\n" "# for logical partitions.\n" "# Parameters are:\n" "# <raidtype> <devcount> <sparecount> <fstype> <" "mountpoint> \\\n" "# <devices> <sparedevices>\n" "# RAID levels 0, 1, 5, 6 and 10 are supported; devices are separated using " "\"#\"\n" "#d-i partman-auto-raid/recipe string \\\n" "# 1 2 0 ext3 / \\\n" "# /dev/sda1#/dev/sdb1 \\\n" "# . \\\n" "# 1 2 0 swap - \\\n" "# /dev/sda5#/dev/sdb5 \\\n" "# . \\\n" "# 0 2 0 ext3 /home \\\n" "# /dev/sda6#/dev/sdb6 \\\n" "# .\n" "\n" "# This makes partman automatically partition without confirmation.\n" "d-i partman-md/confirm boolean true\n" "d-i partman-partitioning/confirm_write_new_label boolean true\n" "d-i partman/choose_partition select finish\n" "d-i partman/confirm boolean true" msgstr "" "# ΣΗΜΕΙΩΣΗ: Η ποιότητα αυτής της επιλογής είναι έκδοσης beta και θα πρέπει " "να χρησιμοποιηθεί προσεκτικά\n" "\n" "# Η μέθοδος θα πρέπει να οριστεί σαν \"raid\".\n" "#d-i partman-auto/method string raid\n" "# Προσδιορίστε τους δίσκους προς διαμέριση. Θα αποκτήσουν όλοι την ίδια " "διάταξη,\n" "# συνεπώς η μέθοδος θα δουλέψει μόνο αν οι δίσκοι έχουν το ίδιο μέγεθος.\n" "#d-i partman-auto/disk string /dev/sda /dev/sdb\n" "\n" "# Στη συνέχεια θα πρέπει να προσδιορίσετε τις φυσικές κατατμήσεις που θα " "χρησιμοποιηθούν.\n" "#d-i partman-auto/expert_recipe string \\\n" "# multiraid :: \\\n" "# 1000 5000 4000 raid \\\n" "# $primary{ } method{ raid } \\\n" "# . \\\n" "# 64 512 300% raid \\\n" "# method{ raid } \\\n" "# . \\\n" "# 500 10000 1000000000 raid \\\n" "# method{ raid } \\\n" "# .\n" "\n" "# Τέλος πρέπει να προσδιορίσετε πώς θα χρησιμοποιηθούν στη διαμόρφωση του " "RAID\n" "# οι κατατμήσεις που έχουν καθοριστεί από πριν. Θυμηθείτε να χρησιμοποιήσετε " "τους σωστούς αριθμούς\n" "# για τις λογικές κατατμήσεις.\n" "# Οι παράμετροι είναι:\n" "# <raidtype> <devcount> <sparecount> <fstype> <" "mountpoint> \\\n" "# <devices> <sparedevices>\n" "# Υποστηρίζονται επίπεδα RAID 0, 1, 5, 6 και 10. Οι συσκευές χωρίζονται με " "δίεση \"#\"\n" "# /dev/sda1#/dev/sdb1 \\\n" "#d-i partman-auto-raid/recipe string \\\n" "# 1 2 0 ext3 / \\\n" "# /dev/sda1#/dev/sdb1 \\\n" "# . \\\n" "# 1 2 0 swap - \\\n" "# /dev/sda5#/dev/sdb5 \\\n" "# . \\\n" "# 0 2 0 ext3 /home \\\n" "# /dev/sda6#/dev/sdb6 \\\n" "# .\n" "\n" "# Το επόμενο έχει σαν αποτέλεσμα την αυτόματη πραγματοποίηση της διαμέρισης " "από το πρόγραμμα partman χωρίς επιβεβαίωση.\n" "d-i partman-md/conοfirm boolean true\n" "d-i partman-partitioning/confirm_write_new_label boolean true\n" "d-i partman/choose_partition select finish\n" "d-i partman/confirm boolean true" #. Tag: title #: preseed.xml:875 #, no-c-format msgid "Controlling how partitions are mounted" msgstr "Έλεγχος του πώς έχουν προσαρτηθεί οι κατατμήσεις" #. Tag: para #: preseed.xml:876 #, no-c-format msgid "" "Normally, filesystems are mounted using a universally unique identifier " "(UUID) as a key; this allows them to be mounted properly even if their " "device name changes. UUIDs are long and difficult to read, so, if you " "prefer, the installer can mount filesystems based on the traditional device " "names, or based on a label you assign. If you ask the installer to mount by " "label, any filesystems without a label will be mounted using a UUID instead." msgstr "" "Συνήθως, τα συστήματα αρχείων προσαρτώνται χρησιμοποποιώντας σαν κλειδί ένα " "καθολικό και μοναδικό στοιχείο ταυτοποίησης (UUID). Αυτό επιτρέπει την ομαλή " "προσάρτησή τους ακόμα κι αν το όνομα της συσκευής που τους αντιστοιχεί " "αλλάξει.Τα στοιχεία αυτά (UUID) είναι μεγάλα σε μήκος και δύσκολο να " "διαβαστούν, συνεπώς αν προτιμάτε ο εγκαταστάτης μπορεί να προσαρτήσει τα " "συστήματα αρχείων με βάση τα παραδοσιακά ονόματα συσκευών ή με βάση κάποια " "ταμπέλα που θα τους αποδόσετε. Αν ζητήσετε από τον εγκαταστάτη να γίνεται η " "προσάρτηση με βάση την ταμπέλα, οποιαδήποτε συστήματα αρχείων δεν έχουν μια " "τέτοια θα προσαρτηθούν με βάση το UUID." #. Tag: para #: preseed.xml:885 #, no-c-format msgid "" "Devices with stable names, such as LVM logical volumes, will continue to use " "their traditional names rather than UUIDs." msgstr "" "Συσκευές με σταθερές ονομασίες. όπως πχ. λογικοί τόμοι LVM, θα εξακολουθούν " "να χρησιμοποιούν τα παραδοσιακά ονόματά τους αντί των UUID." #. Tag: para #: preseed.xml:892 #, no-c-format msgid "" "Traditional device names may change based on the order in which the kernel " "discovers devices at boot, which may cause the wrong filesystem to be " "mounted. Similarly, labels are likely to clash if you plug in a new disk or " "a USB drive, and if that happens your system's behaviour when started will " "be random." msgstr "" "Τα παραδοσιακά ονόματα συσκευών μπορούν να αλλάζουν ανάλογα με τη σειρά με " "την οποία οι συσκευές ανακαλύπτονται από τον πυρήνα κατά την εκκίνηση, κάτι " "που μπορεί να προκαλέσει την προσάρτηση του λάθους συστήματος αρχείων. " "Ανάλογα, ενδέχεται να υπάρξει μια ασυμβατότητα με τις ταμπέλες των συσκευών " "αν συνδέσετε έναν καινούριο δίσκο ή έναν οδηγό δίσκου USB. Αν συμβεί κάτι " "τέτοιο, η συμπεριφορά του συστήματός σας κατά την εκκίνηση μπορεί να είναι " "απρόβλεπτη." #. Tag: screen #: preseed.xml:902 #, no-c-format msgid "" "# The default is to mount by UUID, but you can also choose \"traditional\" " "to\n" "# use traditional device names, or \"label\" to try filesystem labels " "before\n" "# falling back to UUIDs.\n" "#d-i partman/mount_style select uuid" msgstr "" "# Ο προεπιλεγμένος τρόπος προσάρτησης είναι με βάση το UUID, αλλά μπορείτε " "επίσης να επιλέξετε \"traditional\" για\n" "# να χρησιμοποιήσετε παραδοσιακά ονόματα συσκευών, ή \"label\" για να " "δοκιμάσετε τις ταμπέλες των συστημάτων αρχείων πριν\n" "# περάσετε στην μέθοδο με βάση τα UUID.\n" "#d-i partman/mount_style select uuid" #. Tag: title #: preseed.xml:907 #, no-c-format msgid "Base system installation" msgstr "Εγκατάσταση του βασικού συστήματος" #. Tag: para #: preseed.xml:908 #, no-c-format msgid "" "There is actually not very much that can be preseeded for this stage of the " "installation. The only questions asked concern the installation of the " "kernel." msgstr "" "Στην πραγματικότητα, δεν υπάρχουν πολλά πράγματα για τα οποία μπορείτε να " "χρησιμοποιήσετε preseeding σ' αυτό το στάδιο της εγκατάστασης. Οι μόνες " "ερωτήσεις που γίνονται αφορούν την εγκατάσταση του πυρήνα." #. Tag: screen #: preseed.xml:915 #, no-c-format msgid "" "# Select the initramfs generator used to generate the initrd for 2.6 " "kernels.\n" "#d-i base-installer/kernel/linux/initramfs-generators string yaird\n" "\n" "# The kernel image (meta) package to be installed; \"none\" can be used if " "no\n" "# kernel is to be installed.\n" "#d-i base-installer/kernel/image string linux-image-2.6-486" msgstr "" "# Επιλέξτε το πρόγραμμα δημιουργίας του συστήματος αρχείων initramfs, που " "χρησιμοποιήθηκε για την δημιουργία του δίσκου μνήμης initrd για πυρήνες " "2.6.\n" "#d-i base-installer/kernel/linux/initramfs-generators string yaird\n" "\n" "# Το (μετα)πακέτο της εικόνας του πυρήνα προς εγκατάσταση; μπορείτε να " "χρησιμοποιήσετε \"none\" αν δεν\n" "# πρόκειται να εγκαταστήσετε κάποιον πυρήνα.\n" "#d-i base-installer/kernel/image string linux-image-2.6-486" #. Tag: title #: preseed.xml:920 #, no-c-format msgid "Account setup" msgstr "Ρύθμιση Λογαριασμού" #. Tag: para #: preseed.xml:921 #, no-c-format msgid "" "The password for the root account and name and password for a first regular " "user's account can be preseeded. For the passwords you can use either clear " "text values or MD5 hashes." msgstr "" "Ο κωδικός πρόσβασης για τον χρήστη root και το όνομα και ο κωδικός πρόσβασης " "για τον πρώτο λογαριασμό ενός απλού χρήστη μπορούν να προρυθμιστούν. Για " "τους κωδικούς πρόσβασης μπορείτε να χρησιμοποιήσετε είτε έναν απλό μη-" "κρυπτογραφημένο (clear text) είτε MD5 hashes." #. Tag: para #: preseed.xml:928 #, no-c-format msgid "" "Be aware that preseeding passwords is not completely secure as everyone with " "access to the preconfiguration file will have the knowledge of these " "passwords. Using MD5 hashes is considered slightly better in terms of " "security but it might also give a false sense of security as access to a MD5 " "hash allows for brute force attacks." msgstr "" "Έχετε υπόψιν ότι η προρύθμιση για τους κωδικούς πρόσβασης δεν είναι απόλυτα " "ασφαλής καθώς οποιοσδήποτε με πρόσβαση στο αρχείο προρυθμίσεων θα έχει γνώση " "αυτών των κωδικών. Η χρήση κωδικών MD5 hash θεωρείται σχετικά καλλίτερη από " "άποψη ασφάλειας, μπορεί όμως και να δώσει μια ψευδή αίσθηση ασφάλειας καθώς " "η πρόσβαση σ' έναν τέτοιο κωδικό επιτρέπει \"απευθείας\" επιθέσεις (brute " "force attacks)." #. Tag: screen #: preseed.xml:938 #, no-c-format msgid "" "# Skip creation of a root account (normal user account will be able to\n" "# use sudo).\n" "#d-i passwd/root-login boolean false\n" "# Alternatively, to skip creation of a normal user account.\n" "#d-i passwd/make-user boolean false\n" "\n" "# Root password, either in clear text\n" "#d-i passwd/root-password password r00tme\n" "#d-i passwd/root-password-again password r00tme\n" "# or encrypted using an MD5 hash.\n" "#d-i passwd/root-password-crypted password [MD5 hash]\n" "\n" "# To create a normal user account.\n" "#d-i passwd/user-fullname string Debian User\n" "#d-i passwd/username string debian\n" "# Normal user's password, either in clear text\n" "#d-i passwd/user-password password insecure\n" "#d-i passwd/user-password-again password insecure\n" "# or encrypted using an MD5 hash.\n" "#d-i passwd/user-password-crypted password [MD5 hash]\n" "# Create the first user with the specified UID instead of the default.\n" "#d-i passwd/user-uid string 1010\n" "\n" "# The user account will be added to some standard initial groups. To\n" "# override that, use this.\n" "#d-i passwd/user-default-groups string audio cdrom video" msgstr "" "#Παράκαμψη της δημιουργίας λογαριασμού χρήστη root (ο λογαριασμός απλού " "χρήστη\n" "#θα είναι σε θέση να χρησιμοποιήσει την εντολή sudo).\n" "#d-i passwd/root-login boolean false\n" "#Eναλλακτικά για να παρακάμψετε την δημιουργία ενός λογαριασμού απλού " "χρήστη.\n" "#d-i passwd/make-user boolean false\n" "\n" "# Κωδικός χρήστη root, είτε σε απλό κείμενο\n" "#d-i passwd/root-password password r00tme\n" "#d-i passwd/root-password-again password r00tme\n" "# είτε κρυπτογραφημένο με χρήση MD5 hash.\n" "#d-i passwd/root-password-crypted password [MD5 hash]\n" "\n" "# Για να δημιουργήστε έναν λογαριασμό απλού χρήστη.\n" "#d-i passwd/user-fullname string Debian User\n" "#d-i passwd/username string debian\n" "# Κωδικός πρόσβασης απλού χρήστη, είτε σε απλό κείμενο\n" "#d-i passwd/user-password password insecure\n" "#d-i passwd/user-password-again password insecure\n" "# είτε κρυπτογραφημένο με χρήση MD5 hash.\n" "#d-i passwd/user-password-crypted password [MD5 hash]\n" "# Δημιουργία του πρώτου χρήστη με ένα συγκεκριμένο UID αντί του " "προκαθορισμένου.\n" "#d-i passwd/user-uid string 1010\n" "\n" "# Ο λογαριασμός χρήστη θα προστεθεί σε κάποιες δεδομένες αρχικές ομάδες " "χρηστών. Για να το\n" "# υπερσκελίσετε αυτό, χρησιμοποιήστε το παρακά.\n" "#d-i passwd/user-default-groups string audio cdrom video" #. Tag: para #: preseed.xml:940 #, no-c-format msgid "" "The passwd/root-password-crypted and " "passwd/user-password-crypted variables can also be " "preseeded with ! as their value. In that case, the " "corresponding account is disabled. This may be convenient for the root " "account, provided of course that an alternative method is set up to allow " "administrative activities or root login (for instance by using SSH key " "authentication or sudo)." msgstr "" "Οι μεταβλητές passwd/root-password-crypted και " "passwd/user-password-crypted μπορούν επίσης να " "προρυθμιστούν παίρνοντας σαν τιμή το !. Στην περίπτωση αυτή, " "ο αντίστοιχος λογαριασμός απενεργοποιείται. Αυτό μπορεί να είναι βολικό για " "τον λογαριασμό του χρήστη root, εφόσον βέβαια έχει ρυθμιστεί εναλλακτικός " "τρόπος που να επιτρέπει τις διάφορες διαχειριστικές ενέργειες ή την είσοδο " "του χρήστη root (για παράδειγμα με χρήση αυθεντικοποίησης με κλειδί SSH ή " "την εντολή sudo)." #. Tag: para #: preseed.xml:950 #, no-c-format msgid "" "The following command can be used to generate an MD5 hash for a password:" msgstr "" "Η επόμενη εντολή μπορεί να χρησιμοποιηθεί για την παραγωγή ενός κλειδιού " "(hash) MD5 για ένα συνθηματικό χρήστη:" #. Tag: screen #: preseed.xml:954 #, no-c-format msgid "$ printf \"r00tme\" | mkpasswd -s -m md5" msgstr "$ printf \"r00tme\" | mkpasswd -s -m md5" #. Tag: title #: preseed.xml:960 #, no-c-format msgid "Apt setup" msgstr "Ρύθμιση setup" #. Tag: para #: preseed.xml:961 #, no-c-format msgid "" "Setup of the /etc/apt/sources.list and basic " "configuration options is fully automated based on your installation method " "and answers to earlier questions. You can optionally add other (local) " "repositories." msgstr "" "Η ρύθμιση του αρχείου /etc/apt/sources.list και οι " "βασικές επιλογές διαμόρφωσης αυτοματοποιούνται πλήρως ανάλογα με την μέθοδο " "εγκατάστασης και τις απαντήσεις σας σε προηγούμενες ερωτήσεις. Μπορείτε " "προαιρετικά να προσθέσετε και άλλες (τοπικές) \"αποθήκες\" πακέτων." #. Tag: screen #: preseed.xml:969 #, no-c-format msgid "" "# You can choose to install non-free and contrib software.\n" "#d-i apt-setup/non-free boolean true\n" "#d-i apt-setup/contrib boolean true\n" "# Uncomment this if you don't want to use a network mirror.\n" "#d-i apt-setup/use_mirror boolean false\n" "# Select which update services to use; define the mirrors to be used.\n" "# Values shown below are the normal defaults.\n" "#d-i apt-setup/services-select multiselect security, volatile\n" "#d-i apt-setup/security_host string security.debian.org\n" "#d-i apt-setup/volatile_host string volatile.debian.org\n" "\n" "# Additional repositories, local[0-9] available\n" "#d-i apt-setup/local0/repository string \\\n" "# http://local.server/debian stable main\n" "#d-i apt-setup/local0/comment string local server\n" "# Enable deb-src lines\n" "#d-i apt-setup/local0/source boolean true\n" "# URL to the public key of the local repository; you must provide a key or\n" "# apt will complain about the unauthenticated repository and so the\n" "# sources.list line will be left commented out\n" "#d-i apt-setup/local0/key string http://local.server/key\n" "\n" "# By default the installer requires that repositories be authenticated\n" "# using a known gpg key. This setting can be used to disable that\n" "# authentication. Warning: Insecure, not recommended.\n" "#d-i debian-installer/allow_unauthenticated string true" msgstr "" "# Μπορείτε να επιλέξετε να εγκαταστήσετε μη-ελεύθερο και συνεισφερόμενο " "λογισμικό.\n" "#d-i apt-setup/non-free boolean true\n" "#d-i apt-setup/contrib boolean true\n" "# Αποσχολιάστε το επόμενο αν δεν θέλετε να χρησιμοποιήσετε έναν δικτυακό " "καθρέφτη.\n" "#d-i apt-setup/use_mirror boolean false\n" "#Επιλέξτε ποιες υπηρεσίες αναβαθμίσεων θα χρησιμοποιήσετε και προσδιορίστε " "τους δικτυακούς καθρέφτες που θα χρησιμοποιηθούν.\n" "#Οι τιμές που βλέπετε παρακάτω είναι οι κανονικές προκαθορισμένες.\n" "#d-i apt-setup/services-select multiselect security, volatile\n" "#d-i apt-setup/security_host string security.debian.org\n" "#d-i apt-setup/volatile_host string volatile.debian.org\n" "\n" "# Επιπρόσθετα αποθετήρια πακέτων, local[0-9] διαθέσιμα\n" "#d-i apt-setup/local0/repository string \\\n" "# http://local.server/debian stable main\n" "#d-i apt-setup/local0/comment string local server\n" "#Ενεργοποίηση γραμμών για deb-src\n" "#d-i apt-setup/local0/source boolean true\n" "# URL για το δημόσιο κλειδί του τοπικού αποθετηρίου. Θα πρέπει να δώσετε ένα " "κλειδί\n" "#διαφορετικά το apt θα διαμαρτυρηθεί για το μη πιστοποιημένο αποθετήριο και\n" "#η αντίστοιχη γραμμή στο sources.list θα παραμείνει σχολιασμένη\n" "#d-i apt-setup/local0/key string http://local.server/key\n" "\n" "#Εξ' ορισμού ο εγκαταστάτης απαιτεί την αυθεντικοποίηση των αποθετηρίων\n" "# με τη χρήση ενός γνωστού κλειδιού gpg. Η παρούσα ρύθμιση μπορεί να " "χρησιμοποιηθεί\n" "#για την απενεργοποίηση αυτής της αυθεντικοποίησης. Προειδοποίηση: Μη " "ασφαλής, δεν συνίσταται.\n" "#d-i debian-installer/allow_unauthenticated string true" #. Tag: title #: preseed.xml:974 #, no-c-format msgid "Package selection" msgstr "Επιλογή πακέτων" #. Tag: para #: preseed.xml:975 #, no-c-format msgid "" "You can choose to install any combination of tasks that are available. " "Available tasks as of this writing include:" msgstr "" "Μπορείτε να επιλέξετε να εγκαταστήσετε οποιονδήποτε συνδυασμό καθηκόντων " "είναι διαθέσιμα. Διαθέσιμα καθήκοντα περιλαμβάνουν την σιγμή που γράφεται " "αυτό το κείμενο:" #. Tag: userinput #: preseed.xml:984 #, no-c-format msgid "standard" msgstr "Κανονικό σύστημα" #. Tag: userinput #: preseed.xml:987 #, no-c-format msgid "desktop" msgstr "επιφάνεια εργασίας" #. Tag: userinput #: preseed.xml:990 #, no-c-format msgid "gnome-desktop" msgstr "επιφάνεια εργασίας gnome" #. Tag: userinput #: preseed.xml:993 #, no-c-format msgid "kde-desktop" msgstr "επιφάνεια εργασίας kde" #. Tag: userinput #: preseed.xml:996 #, no-c-format msgid "web-server" msgstr "Server ιστοσελίδων" #. Tag: userinput #: preseed.xml:999 #, no-c-format msgid "print-server" msgstr "Server εκτυπώσεων" #. Tag: userinput #: preseed.xml:1002 #, no-c-format msgid "dns-server" msgstr "server oνοματοδοσίας (dns-server)" #. Tag: userinput #: preseed.xml:1005 #, no-c-format msgid "file-server" msgstr "Server αρχείων" #. Tag: userinput #: preseed.xml:1008 #, no-c-format msgid "mail-server" msgstr "Server αλληλογραφίας" #. Tag: userinput #: preseed.xml:1011 #, no-c-format msgid "sql-database" msgstr "Βάση δεδομένων SQL" #. Tag: userinput #: preseed.xml:1014 #, no-c-format msgid "laptop" msgstr "Φορητός υπολογιστής" #. Tag: para #: preseed.xml:1018 #, no-c-format msgid "" "You can also choose to install no tasks, and force the installation of a set " "of packages in some other way. We recommend always including the " "standard task." msgstr "" "Μπορείτε επίσης να επιλέξετε να μην εγκαταστήσετε οποιοδήποτε task, " "επιβάλλοντας την εγκατάσταση ενός συνόλου πακέτων με κάποιον άλλον τρόπο. " "Συνιστούμε πάντως να συμπεριλαμβάνετε πάντα το \"καθήκον\" " "Κανονικό σύστημα." #. Tag: para #: preseed.xml:1024 #, no-c-format msgid "" "If you want to install some individual packages in addition to packages " "installed by tasks, you can use the parameter pkgsel/include. The value of this parameter can be a list of packages separated " "by either commas or spaces, which allows it to be used easily on the kernel " "command line as well." msgstr "" "Αν θέλετε να εγκαταστήσετε κάποια μεμονωμένα πακέτα επιπλέον από τα πακέτα " "που εγκαθίστανται από τις ομάδες πακέτων (tasks), μπορείτε να " "χρησιμοποιήσετε την παράμετρο pkgsel/include. Η τιμή " "αυτής της παραμέτρου μπορεί να είναι μια λίστα πακέτων που διαχωρίζονται με " "άνω τελείες ή κενά, κάτι που επιτρέπει επίσης την εύκολη χρήση της στην " "γραμμή εντολών του πυρήνα." #. Tag: screen #: preseed.xml:1034 #, no-c-format msgid "" "#tasksel tasksel/first multiselect standard, web-server\n" "# If the desktop task is selected, install the kde and xfce desktops\n" "# instead of the default gnome desktop.\n" "#tasksel tasksel/desktop multiselect kde, xfce\n" "\n" "# Individual additional packages to install\n" "#d-i pkgsel/include string openssh-server build-essential\n" "# By default, packages that are only Recommended by packages installed " "using\n" "# pkgsel/include (as opposed to their dependencies) will not be installed.\n" "# Uncomment this line to install Recommends as well.\n" "#d-i pkgsel/include/install-recommends boolean true\n" "# Whether to upgrade packages after debootstrap.\n" "# Allowed values: none, safe-upgrade, full-upgrade\n" "#d-i pkgsel/upgrade select none\n" "\n" "# Some versions of the installer can report back on what software you have\n" "# installed, and what software you use. The default is not to report back,\n" "# but sending reports helps the project determine what software is most\n" "# popular and include it on CDs.\n" "#popularity-contest popularity-contest/participate boolean false" msgstr "" "#tasksel tasksel/first multiselect standard, web-server\n" "#Αν έχει επιλεγεί η ομάδα πακέτων Περιβάλλον Γραφείου, τότε να εγκατασταθούν " "τα περιβάλλοντα kde και xfce\n" "#αντί του προκαθορισμένου περιβάλλοντος gnome.\n" "#tasksel tasksel/desktop multiselect kde, xfce\n" "\n" "# Επιπλέον μεμονωμένα πακέτα για εγκατάσταση\n" "#d-i pkgsel/include string openssh-server build-essential\n" "# Εξ' ορισμού, πακέτα που έχουν μόνο τη σύσταση Προτεινόμενα από άλλα πακέτα " "που εγκαθίστανται χρησιμοποιώντας\n" "# pkgsel/include (σε αντίθεση με τις εξαρτήσεις τους) δεν θα εγκατασταθούν.\n" "# Αποσχολιάστε τη γραμμή αυτή για να εγκαταστήσετε επίσης πακέτα με την " "ένδειξη Recommends.\n" "#d-i pkgsel/include/install-recommends boolean true\n" "# Καθορίζει το αν θα γίνει αναβάθμιση των πακέτων μετά τη διαδικασία " "debootstrap.\n" "# Επιτρεπόμενες τιμές: none, safe-upgrade, full-upgrade\n" "#d-i pkgsel/upgrade select none\n" "\n" "#Μερικές εκδόσεις του εγκαταστάτη μπορούν να δώσουν αναφορά για το " "λογισμικό\n" "# που έχετε εγκαταστήσει και το λογισμικό που χρησιμοποιείτε. Η προεπιλογή " "είναι να μην γίνεται μια τέτοια αναφορά,\n" "# αλλά η αποστολή αναφορών βοηθά το Debian Project στον καθορισμό του " "λογισμικού που είναι\n" "# πιο δημοφιλές ώστε να το συμπεριλαμβάνει στα CD.\n" "#popularity-contest popularity-contest/participate boolean false" #. Tag: title #: preseed.xml:1039 #, no-c-format msgid "Boot loader installation" msgstr "Εγκατάσταση φορτωτή εκκίνησης" #. Tag: screen #: preseed.xml:1041 #, no-c-format msgid "" "# Grub is the default boot loader (for x86). If you want lilo installed\n" "# instead, uncomment this:\n" "#d-i grub-installer/skip boolean true\n" "# To also skip installing lilo, and install no bootloader, uncomment this\n" "# too:\n" "#d-i lilo-installer/skip boolean true\n" "\n" "# This is fairly safe to set, it makes grub install automatically to the " "MBR\n" "# if no other operating system is detected on the machine.\n" "d-i grub-installer/only_debian boolean true\n" "\n" "# This one makes grub-installer install to the MBR if it also finds some " "other\n" "# OS, which is less safe as it might not be able to boot that other OS.\n" "d-i grub-installer/with_other_os boolean true\n" "\n" "# Alternatively, if you want to install to a location other than the mbr,\n" "# uncomment and edit these lines:\n" "#d-i grub-installer/only_debian boolean false\n" "#d-i grub-installer/with_other_os boolean false\n" "#d-i grub-installer/bootdev string (hd0,0)\n" "# To install grub to multiple disks:\n" "#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)\n" "\n" "# Optional password for grub, either in clear text\n" "#d-i grub-installer/password password r00tme\n" "#d-i grub-installer/password-again password r00tme\n" "# or encrypted using an MD5 hash, see grub-md5-crypt(8).\n" "#d-i grub-installer/password-crypted password [MD5 hash]\n" "\n" "# Use the following option to add additional boot parameters for the\n" "# installed system (if supported by the bootloader installer).\n" "# Note: options passed to the installer will be added automatically.\n" "#d-i debian-installer/add-kernel-opts string nousb" msgstr "" "# Το Grub είναι ο προεπιλεγμένος φορτωτής εκκίνησης (για την αρχιτεκτονική " "x86). Αν θέλετε όμως να εγκαταστήσετε το lilo\n" "# αποσχολιάσετε αυτή τη γραμμή:\n" "#d-i grub-installer/skip boolean true\n" "#Για να παραλείψετε την εγκατάσταση και του lilo και να μην εγκαταστήσετε " "καθόλου κάποιον φορτωτή εκκίνησης, αποσχολιάστε και\n" "#αυτή τη γραμμή:\n" "#d-i lilo-installer/skip boolean true\n" "\n" "#Η ακόλουθη ρύθμιση είναι αρκετά ασφαλής να γίνει και προκαλεί την αυτόματη " "εγκατάσταση του grub στο MBR\n" "# αν δεν ανιχνευθεί κάποιο άλλο λειτουργικό σύστημα στο μηχάνημα.\n" "d-i grub-installer/only_debian boolean true\n" "\n" "# Αυτή η ρύθμιση προκαλεί την εγκατάσταση του grub-installer στο MBR αν " "εντοπίσει και κάποιο άλλο\n" "#ΛΣ, αν και είναι σχετικά λιγότερο ασφαλής, καθώς είναι δυνατόν να μην " "μπορεί να εκκινήσει αυτό το ΛΣ.\n" "d-i grub-installer/with_other_os boolean true\n" "\n" "# Εναλλακτικά, αν θέλετε να εγκαταστήσετε το GRUB σε μια τοποθεσία " "διαφορετική από το mbr,\n" "# αποσχολιάστε και διορθώστε τις ακόλουθες γραμμές:\n" "#d-i grub-installer/only_debian boolean false\n" "#d-i grub-installer/with_other_os boolean false\n" "#d-i grub-installer/bootdev string (hd0,0)\n" "# Για εγκατάσταση του grub σε πολλαπλούς δίσκους:\n" "#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)\n" "\n" "# Προαιρετικό συνθηματικό για το grub, είτε σε μη κρυπτογραφημένο κείμενο\n" "#d-i grub-installer/password password r00tme\n" "#d-i grub-installer/password-again password r00tme\n" "# είτε κρυπτογραφημένο με χρήση MD5 hash, δείτε το grub-md5-crypt(8).\n" "#d-i grub-installer/password-crypted password [MD5 hash] # Χρησιμοποιήστε " "την ακόλουθη επιλογή για να προσθέσετε επιπλέον παραμέτρους εκκίνησης για " "το\n" "# εγκατεστημένο σύστημα (εφόσον υποστηρίζονται από τον εγκαταστάτη του " "φορτωτή εκκίνησης).\n" "# Σημείωση: επιλογές που δίνονται στον εγκαταστάτη θα προστεθούν αυτόματα .\n" "#d-i debian-installer/add-kernel-opts string nousb" #. Tag: para #: preseed.xml:1043 #, no-c-format msgid "" "An MD5 hash for a password for grub can be generated " "using grub-md5-crypt, or using the command from the " "example in ." msgstr "" "Ένα κλειδί (hash) MD5 για το συνθηματικό του grub " "μπορεί να παραχθεί με την εντολή grub-md5-crypt, η " "χρησιμοποιώντας την εντολή στο παράδειγμα της ενότητας ." #. Tag: title #: preseed.xml:1053 #, no-c-format msgid "Finishing up the installation" msgstr "Ολοκλήρωση της εγκατάστασης" #. Tag: screen #: preseed.xml:1055 #, no-c-format msgid "" "# During installations from serial console, the regular virtual consoles\n" "# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next\n" "# line to prevent this.\n" "#d-i finish-install/keep-consoles boolean true\n" "\n" "# Avoid that last message about the install being complete.\n" "d-i finish-install/reboot_in_progress note\n" "\n" "# This will prevent the installer from ejecting the CD during the reboot,\n" "# which is useful in some situations.\n" "#d-i cdrom-detect/eject boolean false\n" "\n" "# This is how to make the installer shutdown when finished, but not\n" "# reboot into the installed system.\n" "#d-i debian-installer/exit/halt boolean true\n" "# This will power off the machine instead of just halting it.\n" "#d-i debian-installer/exit/poweroff boolean true" msgstr "" "#Στη διάρκεια εγκαταστάσεων από σειριακή κονσόλα, οι συνήθεις εικονικές " "κονσόλες\n" "#(VT1-VT6) απενεργοποιούνται συνήθως στο αρχείο /etc/inittab. Αποσχολιάστε " "την επόμενη\n" "# γραμμή για να αποφύγετε κάτι τέτοιο.\n" "#d-i finish-install/keep-consoles boolean true\n" "\n" "# Αποφύγετε αυτό το τελευταίο μήνυμα σχετικά με την ολοκλήρωση της " "εγκατάστασης.\n" "d-i finish-install/reboot_in_progress note\n" "\n" "# Αυτό θα αποτρέψει τον εγκαταστάτη από το να εξάγει το CD κατά την " "επανεκκίνηση,\n" "#κάτι που σε μερικές περιπτώσεις είναι χρήσιμο.\n" "#d-i cdrom-detect/eject boolean false\n" "\n" "# Έτσι μπορείτε να τερματίσετε τον εγκαταστάτη μετά την ολοκλήρωση της " "εγκατάστασης, αλλά χωρίς\n" "# επανεκκίνηση στο εγκατεστημένο σύστημα.\n" "#d-i debian-installer/exit/halt boolean true\n" "# This will power off the machine instead of just alting it.\n" "#d-i debian-installer/exit/poweroff boolean true" #. Tag: title #: preseed.xml:1060 #, no-c-format msgid "Preseeding other packages" msgstr "Χρήση preseeding για άλλα πακέτα" #. Tag: screen #: preseed.xml:1062 #, no-c-format msgid "" "# Depending on what software you choose to install, or if things go wrong\n" "# during the installation process, it's possible that other questions may\n" "# be asked. You can preseed those too, of course. To get a list of every\n" "# possible question that could be asked during an install, do an\n" "# installation, and then run these commands:\n" "# debconf-get-selections --installer > file\n" "# debconf-get-selections >> file" msgstr "" "#Ανάλογα με το λογισμικό που επιλέγετε για την εγκατάσταση, ή αν κάτι δεν # " "πάει καλά\n" "# στην διάρκεια της εγκατάστασης, είναι δυνατόν να γίνουν και άλλες\n" "# ερωτήσεις. Μπορείτε να χρησιμοποιήσετε preseeding και γι' αυτές, φυσικά. # " "Για να πάρετε μια λίστα κάθε\n" "# δυνατής ερώτησης που θα μπορούσαν να ρωτηθούν κατά την διάρκεια της # " "εγκατάστασης, πραγματοποιήστε μια\n" "# εγκατάσταση, και μετά εκτελέστε αυτές τις εντολές:\n" "# debconf-get-selections --installer > file\n" "# debconf-get-selections >> file" #. Tag: title #: preseed.xml:1069 #, no-c-format msgid "Advanced options" msgstr "Προχωρημένες επιλογές" #. Tag: title #: preseed.xml:1072 #, no-c-format msgid "Running custom commands during the installation" msgstr "Εκτέλεση προσαρμοσμένων εντολών κατά την διάρκεια της εγκατάστασης." #. Tag: para #: preseed.xml:1073 #, no-c-format msgid "" "A very powerful and flexible option offered by the preconfiguration tools is " "the ability to run commands or scripts at certain points in the installation." msgstr "" "Μια πολύ ισχυρή και ευέλικτη επιλογή που προσφέρεται από τα εργαλεία " "προρύθμισης είναι η δυνατότητα εκτέλεσης εντολών ή σεναρίων σε συγκεκριμένα " "σημεία της εγκατάστασης." #. Tag: screen #: preseed.xml:1081 #, no-c-format msgid "" "# d-i preseeding is inherently not secure. Nothing in the installer checks\n" "# for attempts at buffer overflows or other exploits of the values of a\n" "# preconfiguration file like this one. Only use preconfiguration files from\n" "# trusted locations! To drive that home, and because it's generally useful,\n" "# here's a way to run any shell command you'd like inside the installer,\n" "# automatically.\n" "\n" "# This first command is run as early as possible, just after\n" "# preseeding is read.\n" "#d-i preseed/early_command string anna-install some-udeb\n" "# This command is run immediately before the partitioner starts. It may be\n" "# useful to apply dynamic partitioner preseeding that depends on the state\n" "# of the disks (which may not be visible when preseed/early_command runs).\n" "#d-i partman/early_command \\\n" "# string debconf-set partman-auto/disk \"$(list-devices disk | head -" "n1)\"\n" "# This command is run just before the install finishes, but when there is\n" "# still a usable /target directory. You can chroot to /target and use it\n" "# directly, or use the apt-install and in-target commands to easily install\n" "# packages and run commands in the target system.\n" "#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh" msgstr "" "# H προρύθμιση του d-i είναι από την φύση της μη ασφαλής. Κανένα στοιχείο " "στον εγκαταστάτη δεν ελέγχει\n" "# για προσπάθειες υπερχείλισης (buffer overflow) ή άλλες αδυναμίες στις " "τιμές ενός\n" "# αρχείου προρυθμίσεων όπως αυτό εδώ. Χρησιμοποιείτε αρχεία προρυθμίσεων " "μόνο από\n" "# τοποθεσίες που εμπιστεύεστε! Για να το πετύχετε αυτό, κι επειδή είναι " "γενικά χρήσιμο\n" "# να ένας τρόπος αυτόματης εκτέλεσης οποιασδήποτε εντολής κελύφους μέσα από " "τον εγκαταστάτη.\n" "\n" "# Αυτή η πρώτη εντολή εκτελείται όσο το δυνατόν νωρίτερα, αμέσως μετά\n" "# το διάβασμα του αρχείου προρυθμίσεων.\n" "#d-i preseed/early_command string anna-install some-udeb\n" "# Η εντολή αυτή εκτελείται ακριβώς πριν την εκκίνηση του προγράμματος " "διαμερισης. Πιθανόν να είναι\n" "# χρήσιμο να κάνετε προρύθμιση με το δυναμικό πρόγραμμα διαμέρισης που " "εξαρτάται από την κατάσταση\n" "# των δίσκων (που πιθανόν να μην είναι ορατή όταν εκτελείται πρώιμα σαν " "preseed/early_command).\n" "#d-i partman/early_command \\\n" "# string debconf-set partman-auto/disk \"$(list-devices disk | head -" "n1)\"\n" "# Η εντολή αυτή εκτελείται μόλις πριν από την ολοκλήρωση της εγκατάστασης " "αλλά ενώ υπάρχει ακόμα\n" "# ένας χρησιμοποιήσιμος κατάλογος /target. Μπορείτε να κάνετε chroot στον " "κατάλογο /target και να τον χρησιμοποιήσετε\n" "# άμεσα ή να χρησιμοποιήσετε τις εντολές apt-install και in-target για να " "εγκαταστήσετε εύκολα\n" "# πακέτα και να εκτελέσετε εντολές στο σύστημα προορισμού\n" "#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh" #. Tag: title #: preseed.xml:1086 #, no-c-format msgid "Using preseeding to change default values" msgstr "Χρήση preseeding για την αλλαγή των προκαθορισμένων τιμών" #. Tag: para #: preseed.xml:1087 #, no-c-format msgid "" "It is possible to use preseeding to change the default answer for a " "question, but still have the question asked. To do this the seen flag must be reset to false after setting the " "value for a question. \n" "d-i foo/bar string value\n" "d-i foo/bar seen false\n" " The same effect can be achieved for " "all questions by setting the parameter " "preseed/interactive=true at the boot prompt. This can " "also be useful for testing or debugging your preconfiguration file." msgstr "" "Είναι δυνατόν να χρησιμοποιήσετε την προρύθμιση για να αλλάξετε την " "προκαθορισμένη απάντηση σε μια ερώτηση, επιτρέποντας όμως ακόμα την " "διατύπωσή της. Για να το κάνετε αυτό η σήμανση seen " "πρέπει να οριστεί ξανά σαν false μετά τον καθορισμό μιας " "τιμής για την ερώτηση. \n" "d-i foo/bar string value\n" "d-i foo/bar seen false\n" " Το ίδιο αποτέλεσμα μπορεί να επιτευχθεί για " "όλες τις ερωτήσεις ορίζοντας την παράμετρο " "preseed/interactive=true στο προτρεπτικό εκκίνησης. " "Αυτό μπορεί να είναι χρήσιμο και στον έλεγχο ή την εκσφαλμάτωση του αρχείου " "προρύθμισης." #. Tag: para #: preseed.xml:1101 #, no-c-format msgid "" "Note that the d-i owner should only be used for variables " "used in the installer itself. For variables belonging to packages installed " "on the target system, you should use the name of that package instead. See " "the footnote to ." msgstr "" "Σημειώστε ότι η παράμετρος ιδιοκτήτη του d-i θα πρέπει να " "χρησιμοποιείται μόνο για μεταβλητές που χρησιμοποιούνται στον ίδιον τον " "εγκταταστάτη. Αντίθετα, για μεταβλητές που ανήκουν σε πακέτα εγκατεστημμένα " "στο σύστημα προορισμού, θα πρέπει να χρησιμοποιήσετε το όνομα του πακέτου. " "Δείτε την υποσημείωση στο κεφάλαιο ." #. Tag: para #: preseed.xml:1108 #, no-c-format msgid "" "If you are preseeding using boot parameters, you can make the installer ask " "the corresponding question by using the ?= operator, i.e. " "foo/bar?" "=value (or " "owner:foo/bar?=value). This will of " "course only have effect for parameters that correspond to questions that are " "actually displayed during an installation and not for internal parameters." msgstr "" "Αν κάνετε προρύθμιση χρησιμοποιώντας παραμέτρους εκκίνησης, μπορείτε να " "κάνετε τον εγκαταστάτη να ρωτά την αντίστοιχη ερώτηση χρησιμοποιώντας τον " "τελεστή ?=, δηλ. foo/" "bar?=value " "(ή owner:foo/bar?=value). Αυτό θα έχει " "φυσικά επίδραση μόνο σε παραμέτρους που αντιστοιχούν σε ερωτήσεις που όντως " "εμφανίζονται στη διάρκεια μιας εγκατάστασης και όχι σε εσωτερικές παραμέτρους." #. Tag: title #: preseed.xml:1122 #, no-c-format msgid "Chainloading preconfiguration files" msgstr "Αλυσιδωτή φόρτωση (chainloading) αρχείων προρυθμίσεων" #. Tag: para #: preseed.xml:1123 #, no-c-format msgid "" "It is possible to include other preconfiguration files from a " "preconfiguration file. Any settings in those files will override pre-" "existing settings from files loaded earlier. This makes it possible to put, " "for example, general networking settings for your location in one file and " "more specific settings for certain configurations in other files." msgstr "" "Είναι δυνατόν να συμπεριλάβετε περισσότερα αρχεία προρυθμίσεων μέσα από ένα " "άλλο τέτοιο. Οποιεσδήποτε ρυθμίσεις στα αρχεία αυτά θα υπερισχύσουν των " "ρυθμίσεων που προϋπάρχουν από αρχεία που φορτώθηκαν νωρίτερα. Αυτό καθιστά " "εφικτό, για παράδειγμα, να βάλετε τις γενικές ρυθμίσεις για το δίκτυο στην " "τοποθεσία σας σε ένα αρχείο και πιο συγκεκριμένες ρυθμίσεις για " "συγκεκριμένες διαμορφώσεις σε άλλα αρχεία." #. Tag: screen #: preseed.xml:1133 #, no-c-format msgid "" "# More than one file can be listed, separated by spaces; all will be\n" "# loaded. The included files can have preseed/include directives of their\n" "# own as well. Note that if the filenames are relative, they are taken from\n" "# the same directory as the preconfiguration file that includes them.\n" "#d-i preseed/include string x.cfg\n" "\n" "# The installer can optionally verify checksums of preconfiguration files\n" "# before using them. Currently only md5sums are supported, list the md5sums\n" "# in the same order as the list of files to include.\n" "#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n" "\n" "# More flexibly, this runs a shell command and if it outputs the names of\n" "# preconfiguration files, includes those files. \n" "#d-i preseed/include_command \\\n" "# string if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n" "\n" "# Most flexibly of all, this downloads a program and runs it. The program\n" "# can use commands such as debconf-set to manipulate the debconf database.\n" "# More than one script can be listed, separated by spaces.\n" "# Note that if the filenames are relative, they are taken from the same\n" "# directory as the preconfiguration file that runs them.\n" "#d-i preseed/run string foo.sh" msgstr "" "# Μπορούν να παρατεθούν περισσότερα από ένα αρχεία, χωρισμένα με κενά " "διαστήματα; θα\n" "# φορτωθούν όλα. Τα αρχεία που συμπεριλαμβάνονται μπορούν να έχουν επίσης " "δικές τους ντιρεκτίβες τύπου preseed/include\n" "# Σημειώστε ότι αν δίνονται οι σχετικές διαδρομές για τα ονόματα των " "αρχείων, αυτές θεωρούνται ότι είναι\n" "# στον ίδιο κατάλογο που βρίσκεται το αρχείο προρυθμίσεων που τα " "περιλαμβάνει.\n" "#d-i preseed/include string x.cfg\n" "\n" "# Ο εγκαταστάτης μπορεί προαιρετικά να κάνει επαλήθευση των checksum των " "αρχείων προρυθμίσεων πριν\n" "# από την χρήση τους. Προς το παρόν υποστηρίζονται μόνο md5sums, παραθέστε " "τα md5sums\n" "# με την ίδια σειρά με τα αντίστοιχα αρχεία που πρόκειται να " "συμπεριληφθούν.\n" "#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n" "\n" "# Ακόμα πιο ευέλικτα, αυτό εκτελεί μια εντολή κελύφους και αν δίνει σαν " "έξοδο τα ονόματα των\n" "# αρχείων προρυθμίσεων, τότε συμπεριλαμβάνει τα αρχεία αυτά.\n" "#d-i preseed/include_command \\\n" "# string if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n" "\n" "# Και για τη μέγιστη ευελιξία, αυτό κατεβάζει ένα πρόγραμμα και το εκτελεί. " "Το πρόγραμμα\n" "# μπορεί να χρησιμοποιεί εντολές όπως η debconf-set για τον χειρισμό της " "βάσης δεδομένων του debconf.\n" "# Μπορούν να παρατεθούν περισσότερα από ένα σενάρια, χωρισμένα από κενά " "διαστήματα\n" "# Σημειώστε ότι αν οι διαδρομές των ονομάτων των αρχείων των σεναρίων αυτών " "είναι σχετικές, θεωρούνται ότι είναι στον ίδιο κατάλογο με το αρχείο " "προρυθμίσεων που τα εκτελεί.\n" " #d-i preseed/run string foo.sh" #. Tag: para #: preseed.xml:1135 #, no-c-format msgid "" "It is also possible to chainload from the initrd or file preseeding phase, " "into network preseeding by setting preseed/url in the earlier files. This " "will cause network preseeding to be performed when the network comes up. You " "need to be careful when doing this, since there will be two distinct runs at " "preseeding, meaning for example that you get another chance to run the " "preseed/early command, the second one happening after the network comes up." msgstr "" "Είναι επίσης δυνατόν να έχετε αλυσιδωτή φόρτωση (chainload) από την φάση " "φόρτωσης της μνήμης δίσκου initrd ή της φόρτωσης του αρχείου προρυθμίσεων σ' " "αυτήν της δικτυακής προρύθμισης ορίζοντας τις παραμέτρους preseed/url στα " "αρχεία που προηγούνται. Αυτό θα προκαλέσει την πραγματοποίηση της δικτυακής " "προρύθμισης με το ανέβασμα του δικτύου. Θα πρέπει να είσαστε προσεκτικοί " "όταν κάνετε κάτι τέτοιο γιατί θα υπάρχουν δυο διαφορετικές εκτελέσεις της " "προρύθμισης, που σημαίνει για παράδειγμα ότι έχετε άλλη μια ευκαιρία να " "εκτελέσετε την εντολή preseed/early, με την δεύτερη να προκύπτει όταν το " "δίκτυο έχει ανέβει."