# Danish translation of d-i-manual-post-install.
# Copyright (C) 2014 Free Software Foundation, Inc.
# Joe Hansen <joedalton2@yahoo.dk>, 2014, 2015.
#
# 32-bit processorer (er anvendt selv om 32-bit-processorer er den korrekte brug)
# howto -> manual
# installer -> installationsprogram
# language -> sprog
# locale -> sted (lokalitet andet?)
# locales -> steder (sprogområder)
# scheme -> plan
# stateful -> tilstandebærende
# stateless -> tilstandsfri
# volume -> diskenhed
#
#
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual_post-install\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2015-04-15 20:29+0000\n"
"PO-Revision-Date: 2015-03-25 10:40+0100\n"
"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-xml2pot; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#: post-install.xml:5
#, no-c-format
msgid "Next Steps and Where to Go From Here"
msgstr "De næste trin og hvordan du kommer videre"

#. Tag: title
#: post-install.xml:13
#, no-c-format
msgid "Shutting down the system"
msgstr "Nedlukning af systemet"

#. Tag: para
#: post-install.xml:15
#, no-c-format
msgid ""
"To shut down a running &debian-gnu; system, you must not reboot with the "
"reset switch on the front or back of your computer, or just turn off the "
"computer. &debian-gnu; should be shut down in a controlled manner, otherwise "
"files might get lost and/or disk damage might occur. If you run a desktop "
"environment, there is usually an option to <quote>log out</quote> available "
"from the application menu that allows you to shutdown (or reboot) the system."
msgstr ""

#. Tag: para
#: post-install.xml:25
#, no-c-format
msgid ""
"Alternatively you can press the key combination <keycombo> <keycap>Ctrl</"
"keycap> <keycap>Alt</keycap> <keycap>Del</keycap> </keycombo> <phrase arch="
"\"powerpc\"> or <keycombo> <keycap>Control</keycap> <keycap>Shift</keycap> "
"<keycap>Power</keycap> </keycombo> on Macintosh systems</phrase>. A last "
"option is to log in as root and type one of the commands <command>poweroff</"
"command>, <command>halt</command> or <command>shutdown -h now</command> if "
"either of the key combinations do not work or you prefer to type commands; "
"use <command>reboot</command> to reboot the system."
msgstr ""

#. Tag: title
#: post-install.xml:46
#, no-c-format
msgid "If You Are New to Unix"
msgstr "Hvis du er ny til Unix"

#. Tag: para
#: post-install.xml:47
#, no-c-format
msgid ""
"If you are new to Unix, you probably should go out and buy some books and do "
"some reading. A lot of valuable information can also be found in the <ulink "
"url=\"&url-debian-reference;\">Debian Reference</ulink>. This <ulink url="
"\"&url-unix-faq;\">list of Unix FAQs</ulink> contains a number of UseNet "
"documents which provide a nice historical reference."
msgstr ""

#. Tag: para
#: post-install.xml:55
#, no-c-format
msgid ""
"Linux is an implementation of Unix. The <ulink url=\"&url-ldp;\">Linux "
"Documentation Project (LDP)</ulink> collects a number of HOWTOs and online "
"books relating to Linux. Most of these documents can be installed locally; "
"just install the <classname>doc-linux-html</classname> package (HTML "
"versions) or the <classname>doc-linux-text</classname> package (ASCII "
"versions), then look in <filename>/usr/share/doc/HOWTO</filename>. "
"International versions of the LDP HOWTOs are also available as &debian; "
"packages."
msgstr ""

#. Tag: title
#: post-install.xml:76
#, no-c-format
msgid "Orienting Yourself to &debian;"
msgstr ""

#. Tag: para
#: post-install.xml:77
#, no-c-format
msgid ""
"&debian; is a little different from other distributions. Even if you're "
"familiar with Linux in other distributions, there are things you should know "
"about &debian; to help you to keep your system in a good, clean state. This "
"chapter contains material to help you get oriented; it is not intended to be "
"a tutorial for how to use &debian;, but just a very brief glimpse of the "
"system for the very rushed."
msgstr ""

#. Tag: title
#: post-install.xml:88
#, no-c-format
msgid "&debian; Packaging System"
msgstr "&debian;-pakkesystemet"

#. Tag: para
#: post-install.xml:89
#, no-c-format
msgid ""
"The most important concept to grasp is the &debian; packaging system. In "
"essence, large parts of your system should be considered under the control "
"of the packaging system. These include: <itemizedlist> <listitem><para> "
"<filename>/usr</filename> (excluding <filename>/usr/local</filename>) </"
"para></listitem> <listitem><para> <filename>/var</filename> (you could make "
"<filename>/var/local</filename> and be safe in there) </para></listitem> "
"<listitem><para> <filename>/bin</filename> </para></listitem> "
"<listitem><para> <filename>/sbin</filename> </para></listitem> "
"<listitem><para> <filename>/lib</filename> </para></listitem> </"
"itemizedlist> For instance, if you replace <filename>/usr/bin/perl</"
"filename>, that will work, but then if you upgrade your <classname>perl</"
"classname> package, the file you put there will be replaced. Experts can get "
"around this by putting packages on <quote>hold</quote> in <command>aptitude</"
"command>."
msgstr ""

#. Tag: para
#: post-install.xml:130
#, no-c-format
msgid ""
"One of the best installation methods is apt. You can use the command line "
"version <command>apt-get</command> or full-screen text version "
"<application>aptitude</application>. Note apt will also let you merge main, "
"contrib, and non-free so you can have export-restricted packages as well as "
"standard versions."
msgstr ""

#. Tag: title
#: post-install.xml:141
#, no-c-format
msgid "Additional Software Available for &debian;"
msgstr "Yderligere programmer tilgængelige for &debian;"

#. Tag: para
#: post-install.xml:142
#, no-c-format
msgid ""
"There are official and unofficial software repositories that are not enabled "
"in the default &debian; install. These contain software which many find "
"important and expect to have. Information on these additional repositories "
"can be found on the &debian; Wiki page titled <ulink url=\"&url-debian-wiki-"
"software;\">The Software Available for &debian;'s Stable Release</ulink>."
msgstr ""

#. Tag: title
#: post-install.xml:154
#, no-c-format
msgid "Application Version Management"
msgstr "Håndtering af programversion"

#. Tag: para
#: post-install.xml:155
#, no-c-format
msgid ""
"Alternative versions of applications are managed by update-alternatives. If "
"you are maintaining multiple versions of your applications, read the update-"
"alternatives man page."
msgstr ""

#. Tag: title
#: post-install.xml:165
#, no-c-format
msgid "Cron Job Management"
msgstr "Håndtering af cronjob"

#. Tag: para
#: post-install.xml:166
#, no-c-format
msgid ""
"Any jobs under the purview of the system administrator should be in "
"<filename>/etc</filename>, since they are configuration files. If you have a "
"root cron job for daily, weekly, or monthly runs, put them in <filename>/etc/"
"cron.{daily,weekly,monthly}</filename>. These are invoked from <filename>/"
"etc/crontab</filename>, and will run in alphabetic order, which serializes "
"them."
msgstr ""

#. Tag: para
#: post-install.xml:175
#, no-c-format
msgid ""
"On the other hand, if you have a cron job that (a) needs to run as a special "
"user, or (b) needs to run at a special time or frequency, you can use either "
"<filename>/etc/crontab</filename>, or, better yet, <filename>/etc/cron.d/"
"whatever</filename>. These particular files also have an extra field that "
"allows you to stipulate the user account under which the cron job runs."
msgstr ""

#. Tag: para
#: post-install.xml:184
#, no-c-format
msgid ""
"In either case, you just edit the files and cron will notice them "
"automatically. There is no need to run a special command. For more "
"information see cron(8), crontab(5), and <filename>/usr/share/doc/cron/"
"README.Debian</filename>."
msgstr ""

#. Tag: title
#: post-install.xml:199
#, no-c-format
msgid "Further Reading and Information"
msgstr "Yderligere læsning og information"

#. Tag: para
#: post-install.xml:200
#, no-c-format
msgid ""
"If you need information about a particular program, you should first try "
"<userinput>man <replaceable>program</replaceable></userinput>, or "
"<userinput>info <replaceable>program</replaceable></userinput>."
msgstr ""

#. Tag: para
#: post-install.xml:206
#, no-c-format
msgid ""
"There is lots of useful documentation in <filename>/usr/share/doc</filename> "
"as well. In particular, <filename>/usr/share/doc/HOWTO</filename> and "
"<filename>/usr/share/doc/FAQ</filename> contain lots of interesting "
"information. To submit bugs, look at <filename>/usr/share/doc/debian/bug*</"
"filename>. To read about &debian;-specific issues for particular programs, "
"look at <filename>/usr/share/doc/(package name)/README.Debian</filename>."
msgstr ""

#. Tag: para
#: post-install.xml:217
#, no-c-format
msgid ""
"The <ulink url=\"http://www.debian.org/\">Debian web site</ulink> contains a "
"large quantity of documentation about &debian;. In particular, see the "
"<ulink url=\"http://www.debian.org/doc/FAQ/\">Debian GNU/Linux FAQ</ulink> "
"and the <ulink url=\"http://www.debian.org/doc/user-manuals#quick-reference"
"\">Debian Reference</ulink>. An index of more &debian; documentation is "
"available from the <ulink url=\"http://www.debian.org/doc/ddp\">Debian "
"Documentation Project</ulink>. The &debian; community is self-supporting; to "
"subscribe to one or more of the Debian mailing lists, see the <ulink url="
"\"http://www.debian.org/MailingLists/subscribe\"> Mail List Subscription</"
"ulink> page. Last, but not least, the <ulink url=\"http://lists.debian.org/"
"\">Debian Mailing List Archives</ulink> contain a wealth of information on "
"&debian;."
msgstr ""

#. Tag: para
#: post-install.xml:235
#, no-c-format
msgid ""
"A general source of information on GNU/Linux is the <ulink url=\"http://www."
"tldp.org/\">Linux Documentation Project</ulink>. There you will find the "
"HOWTOs and pointers to other very valuable information on parts of a GNU/"
"Linux system."
msgstr ""

#. Tag: title
#: post-install.xml:251
#, no-c-format
msgid "Setting Up Your System To Use E-Mail"
msgstr "Opsætning af dit system så du kan bruge e-post"

#. Tag: para
#: post-install.xml:252
#, no-c-format
msgid ""
"Today, email is an important part of many people's life. As there are many "
"options as to how to set it up, and as having it set up correctly is "
"important for some &debian; utilities, we will try to cover the basics in "
"this section."
msgstr ""

#. Tag: para
#: post-install.xml:259
#, no-c-format
msgid ""
"There are three main functions that make up an e-mail system. First there is "
"the <firstterm>Mail User Agent</firstterm> (MUA) which is the program a user "
"actually uses to compose and read mails. Then there is the <firstterm>Mail "
"Transfer Agent</firstterm> (MTA) that takes care of transferring messages "
"from one computer to another. And last there is the <firstterm>Mail Delivery "
"Agent</firstterm> (MDA) that takes care of delivering incoming mail to the "
"user's inbox."
msgstr ""

#. Tag: para
#: post-install.xml:269
#, no-c-format
msgid ""
"These three functions can be performed by separate programs, but they can "
"also be combined in one or two programs. It is also possible to have "
"different programs handle these functions for different types of mail."
msgstr ""

#. Tag: para
#: post-install.xml:275
#, no-c-format
msgid ""
"On Linux and Unix systems <command>mutt</command> is historically a very "
"popular MUA. Like most traditional Linux programs it is text based. It is "
"often used in combination with <command>exim</command> or <command>sendmail</"
"command> as MTA and <command>procmail</command> as MDA."
msgstr ""

#. Tag: para
#: post-install.xml:282
#, no-c-format
msgid ""
"With the increasing popularity of graphical desktop systems, the use of "
"graphical e-mail programs like GNOME's <command>evolution</command>, KDE's "
"<command>kmail</command> or Mozilla's <command>thunderbird</command> (in "
"&debian; available as <command>icedove</command><footnote> <para> The reason "
"that <command>thunderbird</command> has been renamed to <command>icedove</"
"command> in &debian; has to do with licensing issues. Details are outside "
"the scope of this manual. </para> </footnote>) is becoming more popular. "
"These programs combine the function of a MUA, MTA and MDA, but can &mdash; "
"and often are &mdash; also be used in combination with the traditional Linux "
"tools."
msgstr ""

#. Tag: title
#: post-install.xml:302
#, no-c-format
msgid "Default E-Mail Configuration"
msgstr "Standard e-postkonfiguration"

#. Tag: para
#: post-install.xml:303
#, no-c-format
msgid ""
"Even if you are planning to use a graphical mail program, it is important "
"that a traditional MTA/MDA is also installed and correctly set up on your "
"&debian-gnu; system. Reason is that various utilities running on the "
"system<footnote> <para> Examples are: <command>cron</command>, "
"<command>quota</command>, <command>logcheck</command>, <command>aide</"
"command>, &hellip; </para> </footnote> can send important notices by e-mail "
"to inform the system administrator of (potential) problems or changes."
msgstr ""

#. Tag: para
#: post-install.xml:318
#, no-c-format
msgid ""
"For this reason the packages <classname>exim4</classname> and "
"<classname>mutt</classname> will be installed by default (provided you did "
"not unselect the <quote>standard</quote> task during the installation). "
"<classname>exim4</classname> is a combination MTA/MDA that is relatively "
"small but very flexible. By default it will be configured to only handle e-"
"mail local to the system itself and e-mails addressed to the system "
"administrator (root account) will be delivered to the regular user account "
"created during the installation<footnote> <para> The forwarding of mail for "
"root to the regular user account is configured in <filename>/etc/aliases</"
"filename>. If no regular user account was created, the mail will of course "
"be delivered to the root account itself. </para> </footnote>."
msgstr ""

#. Tag: para
#: post-install.xml:337
#, no-c-format
msgid ""
"When system e-mails are delivered they are added to a file in <filename>/var/"
"mail/<replaceable>account_name</replaceable></filename>. The e-mails can be "
"read using <command>mutt</command>."
msgstr ""

#. Tag: title
#: post-install.xml:347
#, no-c-format
msgid "Sending E-Mails Outside The System"
msgstr "Sende e-post udenfor systemet"

#. Tag: para
#: post-install.xml:348
#, no-c-format
msgid ""
"As mentioned earlier, the installed &debian; system is only set up to handle "
"e-mail local to the system, not for sending mail to others nor for receiving "
"mail from others."
msgstr ""

#. Tag: para
#: post-install.xml:354
#, no-c-format
msgid ""
"If you would like <classname>exim4</classname> to handle external e-mail, "
"please refer to the next subsection for the basic available configuration "
"options. Make sure to test that mail can be sent and received correctly."
msgstr ""

#. Tag: para
#: post-install.xml:360
#, no-c-format
msgid ""
"If you intend to use a graphical mail program and use a mail server of your "
"Internet Service Provider (ISP) or your company, there is not really any "
"need to configure <classname>exim4</classname> for handling external e-mail. "
"Just configure your favorite graphical mail program to use the correct "
"servers to send and receive e-mail (how is outside the scope of this manual)."
msgstr ""

#. Tag: para
#: post-install.xml:369
#, no-c-format
msgid ""
"However, in that case you may need to configure individual utilities to "
"correctly send e-mails. One such utility is <command>reportbug</command>, a "
"program that facilitates submitting bug reports against &debian; packages. "
"By default it expects to be able to use <classname>exim4</classname> to "
"submit bug reports."
msgstr ""

#. Tag: para
#: post-install.xml:377
#, no-c-format
msgid ""
"To correctly set up <command>reportbug</command> to use an external mail "
"server, please run the command <command>reportbug --configure</command> and "
"answer <quote>no</quote> to the question if an MTA is available. You will "
"then be asked for the SMTP server to be used for submitting bug reports."
msgstr ""

#. Tag: title
#: post-install.xml:388
#, no-c-format
msgid "Configuring the Exim4 Mail Transport Agent"
msgstr "Konfiguration af Exim4-posttransportagenten"

#. Tag: para
#: post-install.xml:389
#, no-c-format
msgid ""
"If you would like your system to also handle external e-mail, you will need "
"to reconfigure the <classname>exim4</classname> package<footnote> <para> You "
"can of course also remove <classname>exim4</classname> and replace it with "
"an alternative MTA/MDA. </para> </footnote>:"
msgstr ""

#. Tag: screen
#: post-install.xml:401
#, no-c-format
msgid "# dpkg-reconfigure exim4-config"
msgstr "# dpkg-reconfigure exim4-config"

#. Tag: para
#: post-install.xml:403
#, no-c-format
msgid ""
"After entering that command (as root), you will be asked if you want split "
"the configuration into small files. If you are unsure, select the default "
"option."
msgstr ""

#. Tag: para
#: post-install.xml:409
#, no-c-format
msgid ""
"Next you will be presented with several common mail scenarios. Choose the "
"one that most closely resembles your needs."
msgstr ""

#. Tag: term
#: post-install.xml:418
#, no-c-format
msgid "internet site"
msgstr "internetside"

#. Tag: para
#: post-install.xml:419
#, no-c-format
msgid ""
"Your system is connected to a network and your mail is sent and received "
"directly using SMTP. On the following screens you will be asked a few basic "
"questions, like your machine's mail name, or a list of domains for which you "
"accept or relay mail."
msgstr ""

#. Tag: term
#: post-install.xml:430
#, no-c-format
msgid "mail sent by smarthost"
msgstr ""

#. Tag: para
#: post-install.xml:431
#, no-c-format
msgid ""
"In this scenario your outgoing mail is forwarded to another machine, called "
"a <quote>smarthost</quote>, which takes care of sending the message on to "
"its destination. The smarthost also usually stores incoming mail addressed "
"to your computer, so you don't need to be permanently online. That also "
"means you have to download your mail from the smarthost via programs like "
"fetchmail."
msgstr ""

#. Tag: para
#: post-install.xml:441
#, no-c-format
msgid ""
"In a lot of cases the smarthost will be your ISP's mail server, which makes "
"this option very suitable for dial-up users. It can also be a company mail "
"server, or even another system on your own network."
msgstr ""

#. Tag: term
#: post-install.xml:451
#, no-c-format
msgid "mail sent by smarthost; no local mail"
msgstr ""

#. Tag: para
#: post-install.xml:452
#, no-c-format
msgid ""
"This option is basically the same as the previous one except that the system "
"will not be set up to handle mail for a local e-mail domain. Mail on the "
"system itself (e.g. for the system administrator) will still be handled."
msgstr ""

#. Tag: term
#: post-install.xml:463
#, no-c-format
msgid "local delivery only"
msgstr ""

#. Tag: para
#: post-install.xml:464
#, no-c-format
msgid "This is the option your system is configured for by default."
msgstr ""

#. Tag: term
#: post-install.xml:472
#, no-c-format
msgid "no configuration at this time"
msgstr ""

#. Tag: para
#: post-install.xml:473
#, no-c-format
msgid ""
"Choose this if you are absolutely convinced you know what you are doing. "
"This will leave you with an unconfigured mail system &mdash; until you "
"configure it, you won't be able to send or receive any mail and you may miss "
"some important messages from your system utilities."
msgstr ""

#. Tag: para
#: post-install.xml:484
#, no-c-format
msgid ""
"If none of these scenarios suits your needs, or if you need a finer grained "
"setup, you will need to edit configuration files under the <filename>/etc/"
"exim4</filename> directory after the installation is complete. More "
"information about <classname>exim4</classname> may be found under <filename>/"
"usr/share/doc/exim4</filename>; the file <filename>README.Debian.gz</"
"filename> has further details about configuring <classname>exim4</classname> "
"and explains where to find additional documentation."
msgstr ""

#. Tag: para
#: post-install.xml:495
#, no-c-format
msgid ""
"Note that sending mail directly to the Internet when you don't have an "
"official domain name, can result in your mail being rejected because of anti-"
"spam measures on receiving servers. Using your ISP's mail server is "
"preferred. If you still do want to send out mail directly, you may want to "
"use a different e-mail address than is generated by default. If you use "
"<classname>exim4</classname> as your MTA, this is possible by adding an "
"entry in <filename>/etc/email-addresses</filename>."
msgstr ""

#. Tag: title
#: post-install.xml:513
#, no-c-format
msgid "Compiling a New Kernel"
msgstr ""

#. Tag: para
#: post-install.xml:514
#, no-c-format
msgid ""
"Why would someone want to compile a new kernel? It is often not necessary "
"since the default kernel shipped with &debian; handles most configurations. "
"Also, &debian; often offers several alternative kernels. So you may want to "
"check first if there is an alternative kernel image package that better "
"corresponds to your hardware. However, it can be useful to compile a new "
"kernel in order to:"
msgstr ""

#. Tag: para
#: post-install.xml:524
#, no-c-format
msgid ""
"handle special hardware needs, or hardware conflicts with the pre-supplied "
"kernels"
msgstr ""

#. Tag: para
#: post-install.xml:530
#, no-c-format
msgid ""
"use options of the kernel which are not supported in the pre-supplied "
"kernels (such as high memory support)"
msgstr ""

#. Tag: para
#: post-install.xml:536
#, no-c-format
msgid "optimize the kernel by removing useless drivers to speed up boot time"
msgstr ""

#. Tag: para
#: post-install.xml:541
#, no-c-format
msgid "create a monolithic instead of a modularized kernel"
msgstr ""

#. Tag: para
#: post-install.xml:546
#, no-c-format
msgid "run an updated or development kernel"
msgstr "kør en opdateret eller udviklingskerne"

#. Tag: para
#: post-install.xml:551
#, no-c-format
msgid "learn more about linux kernels"
msgstr "lær mere om Linuxkerner"

#. Tag: title
#: post-install.xml:560
#, no-c-format
msgid "Kernel Image Management"
msgstr ""

#. Tag: para
#: post-install.xml:561
#, no-c-format
msgid "Don't be afraid to try compiling the kernel. It's fun and profitable."
msgstr ""
"Vær ikke bange for at prøve at kompilere kernen. Det er sjovt og giver "
"indsigt."

#. Tag: para
#: post-install.xml:565
#, no-c-format
msgid ""
"To compile a kernel the &debian; way, you need some packages: "
"<classname>fakeroot</classname>, <classname>kernel-package</classname>, "
"<classname>linux-source-2.6</classname> and a few others which are probably "
"already installed (see <filename>/usr/share/doc/kernel-package/README.gz</"
"filename> for the complete list)."
msgstr ""

#. Tag: para
#: post-install.xml:574
#, no-c-format
msgid ""
"This method will make a .deb of your kernel source, and, if you have non-"
"standard modules, make a synchronized dependent .deb of those too. It's a "
"better way to manage kernel images; <filename>/boot</filename> will hold the "
"kernel, the System.map, and a log of the active config file for the build."
msgstr ""

#. Tag: para
#: post-install.xml:582
#, no-c-format
msgid ""
"Note that you don't <emphasis>have</emphasis> to compile your kernel the "
"<quote>&debian; way</quote>; but we find that using the packaging system to "
"manage your kernel is actually safer and easier. In fact, you can get your "
"kernel sources right from Linus instead of <classname>linux-source-2.6</"
"classname>, yet still use the <classname>kernel-package</classname> "
"compilation method."
msgstr ""

#. Tag: para
#: post-install.xml:591
#, no-c-format
msgid ""
"Note that you'll find complete documentation on using <classname>kernel-"
"package</classname> under <filename>/usr/share/doc/kernel-package</"
"filename>. This section just contains a brief tutorial."
msgstr ""
"Bemærk at du kan finde en fuldstændig dokumentation for brugen af "
"<classname>kernel-package</classname> under <filename>/usr/share/doc/kernel-"
"package</filename>. Dette afsnit indeholder kun en kort introduktion."

#. Tag: para
#: post-install.xml:598
#, no-c-format
msgid ""
"Hereafter, we'll assume you have free rein over your machine and will "
"extract your kernel source to somewhere in your home directory<footnote> "
"<para> There are other locations where you can extract kernel sources and "
"build your custom kernel, but this is easiest as it does not require special "
"permissions. </para> </footnote>. We'll also assume that your kernel version "
"is &kernelversion;. Make sure you are in the directory to where you want to "
"unpack the kernel sources, extract them using <userinput>tar xjf /usr/src/"
"linux-source-&kernelversion;.tar.bz2</userinput> and change to the directory "
"<filename>linux-source-&kernelversion;</filename> that will have been "
"created."
msgstr ""

#. Tag: para
#: post-install.xml:618
#, no-c-format
msgid ""
"Now, you can configure your kernel. Run <userinput>make xconfig</userinput> "
"if X11 is installed, configured and being run; run <userinput>make "
"menuconfig</userinput> otherwise (you'll need <classname>libncurses5-dev</"
"classname> installed). Take the time to read the online help and choose "
"carefully. When in doubt, it is typically better to include the device "
"driver (the software which manages hardware peripherals, such as Ethernet "
"cards, SCSI controllers, and so on) you are unsure about. Be careful: other "
"options, not related to a specific hardware, should be left at the default "
"value if you do not understand them. Do not forget to select <quote>Kernel "
"module loader</quote> in <quote>Loadable module support</quote> (it is not "
"selected by default). If not included, your &debian; installation will "
"experience problems."
msgstr ""

#. Tag: para
#: post-install.xml:633
#, no-c-format
msgid ""
"Clean the source tree and reset the <classname>kernel-package</classname> "
"parameters. To do that, do <userinput>make-kpkg clean</userinput>."
msgstr ""

#. Tag: para
#: post-install.xml:638
#, no-c-format
msgid ""
"Now, compile the kernel: <userinput>fakeroot make-kpkg --initrd --"
"revision=custom.1.0 kernel_image</userinput>. The version number of "
"<quote>1.0</quote> can be changed at will; this is just a version number "
"that you will use to track your kernel builds. Likewise, you can put any "
"word you like in place of <quote>custom</quote> (e.g., a host name). Kernel "
"compilation may take quite a while, depending on the power of your machine."
msgstr ""

#. Tag: para
#: post-install.xml:648
#, no-c-format
msgid ""
"Once the compilation is complete, you can install your custom kernel like "
"any package. As root, do <userinput>dpkg -i ../&kernelpackage;-"
"&kernelversion;-<replaceable>subarchitecture</"
"replaceable>_custom.1.0_&architecture;.deb</userinput>. The "
"<replaceable>subarchitecture</replaceable> part is an optional sub-"
"architecture, <phrase arch=\"i386\"> such as <quote>686</quote>, </phrase> "
"depending on what kernel options you set. <userinput>dpkg -i</userinput> "
"will install the kernel, along with some other nice supporting files. For "
"instance, the <filename>System.map</filename> will be properly installed "
"(helpful for debugging kernel problems), and <filename>/boot/config-"
"&kernelversion;</filename> will be installed, containing your current "
"configuration set. Your new kernel package is also clever enough to "
"automatically update your boot loader to use the new kernel. If you have "
"created a modules package, you'll need to install that package as well."
msgstr ""

#. Tag: para
#: post-install.xml:668
#, no-c-format
msgid ""
"It is time to reboot the system: read carefully any warning that the above "
"step may have produced, then <userinput>shutdown -r now</userinput>."
msgstr ""
"Det er tid til at genstarte systemet: Læs omhyggeligt alle advarsler som de "
"ovenstående trin kan have medført, og så <userinput>shutdown -r now</"
"userinput>."

#. Tag: para
#: post-install.xml:673
#, no-c-format
msgid ""
"For more information on &debian; kernels and kernel compilation, see the "
"<ulink url=\"&url-kernel-handbook;\">Debian Linux Kernel Handbook</ulink>. "
"For more information on <classname>kernel-package</classname>, read the fine "
"documentation in <filename>/usr/share/doc/kernel-package</filename>."
msgstr ""

#. Tag: title
#: post-install.xml:689
#, no-c-format
msgid "Recovering a Broken System"
msgstr "Gendannelse af et ødelagt system"

#. Tag: para
#: post-install.xml:690
#, no-c-format
msgid ""
"Sometimes, things go wrong, and the system you've carefully installed is no "
"longer bootable. Perhaps the boot loader configuration broke while trying "
"out a change, or perhaps a new kernel you installed won't boot, or perhaps "
"cosmic rays hit your disk and flipped a bit in <filename>/sbin/init</"
"filename>. Regardless of the cause, you'll need to have a system to work "
"from while you fix it, and rescue mode can be useful for this."
msgstr ""

#. Tag: para
#: post-install.xml:700
#, no-c-format
msgid ""
"To access rescue mode, select <userinput>rescue</userinput> from the boot "
"menu, type <userinput>rescue</userinput> at the <prompt>boot:</prompt> "
"prompt, or boot with the <userinput>rescue/enable=true</userinput> boot "
"parameter. You'll be shown the first few screens of the installer, with a "
"note in the corner of the display to indicate that this is rescue mode, not "
"a full installation. Don't worry, your system is not about to be "
"overwritten! Rescue mode simply takes advantage of the hardware detection "
"facilities available in the installer to ensure that your disks, network "
"devices, and so on are available to you while repairing your system."
msgstr ""

#. Tag: para
#: post-install.xml:717
#, no-c-format
msgid ""
"Instead of the partitioning tool, you should now be presented with a list of "
"the partitions on your system, and asked to select one of them. Normally, "
"you should select the partition containing the root file system that you "
"need to repair. You may select partitions on RAID and LVM devices as well as "
"those created directly on disks."
msgstr ""

#. Tag: para
#: post-install.xml:725
#, no-c-format
msgid ""
"If possible, the installer will now present you with a shell prompt in the "
"file system you selected, which you can use to perform any necessary "
"repairs. <phrase arch=\"any-x86\"> For example, if you need to reinstall the "
"GRUB boot loader into the master boot record of the first hard disk, you "
"could enter the command <userinput>grub-install '(hd0)'</userinput> to do "
"so. </phrase>"
msgstr ""

#. Tag: para
#: post-install.xml:737
#, no-c-format
msgid ""
"If the installer cannot run a usable shell in the root file system you "
"selected, perhaps because the file system is corrupt, then it will issue a "
"warning and offer to give you a shell in the installer environment instead. "
"You may not have as many tools available in this environment, but they will "
"often be enough to repair your system anyway. The root file system you "
"selected will be mounted on the <filename>/target</filename> directory."
msgstr ""

#. Tag: para
#: post-install.xml:746
#, no-c-format
msgid "In either case, after you exit the shell, the system will reboot."
msgstr "I begge tilfælde, efter du afslutter skallen, vil systemet genstarte."

#. Tag: para
#: post-install.xml:750
#, no-c-format
msgid ""
"Finally, note that repairing broken systems can be difficult, and this "
"manual does not attempt to go into all the things that might have gone wrong "
"or how to fix them. If you have problems, consult an expert."
msgstr ""
"Endelig, bemærk at reparation af ødelagte systemer kan være svært, og denne "
"manual forsøger ikke at dække alle de problemstillinger, der kan gå galt "
"eller hvordan de skal rettes. Hvis du har problemer, så spørg en ekspert."