Setting up a DHCP server One free software DHCP server is ISC dhcpd. For &debian;, the dhcp3-server package is recommended. Here is a sample configuration file for it (see /etc/dhcp3/dhcpd.conf): option domain-name "example.com"; option domain-name-servers ns1.example.com; option subnet-mask 255.255.255.0; default-lease-time 600; max-lease-time 7200; server-name "servername"; subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.200 192.168.1.253; option routers 192.168.1.1; } host clientname { filename "/tftpboot.img"; server-name "servername"; next-server servername; hardware ethernet 01:23:45:67:89:AB; fixed-address 192.168.1.90; } In this example, there is one server servername which performs all of the work of DHCP server, TFTP server, and network gateway. You will almost certainly need to change the domain-name options, as well as the server name and client hardware address. The filename option should be the name of the file which will be retrieved via TFTP. After you have edited the dhcpd configuration file, restart it with /etc/init.d/dhcpd3-server restart. Enabling PXE Booting in the DHCP configuration Here is another example for a dhcp.conf using the Pre-boot Execution Environment (PXE) method of TFTP. option domain-name "example.com"; default-lease-time 600; max-lease-time 7200; allow booting; allow bootp; # The next paragraph needs to be modified to fit your case subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.200 192.168.1.253; option broadcast-address 192.168.1.255; # the gateway address which can be different # (access to the internet for instance) option routers 192.168.1.1; # indicate the dns you want to use option domain-name-servers 192.168.1.3; } group { next-server 192.168.1.3; host tftpclient { # tftp client hardware address hardware ethernet 00:10:DC:27:6C:15; filename "/pxelinux.0"; } } Note that for PXE booting, the client filename pxelinux.0 is a boot loader, not a kernel image (see below).