The easiest way to boot a Netwinder is over the network, using the supplied TFTP image &netwinder-boot-img;. CATS can be booted either via the network or from CD-ROM. The kernel and initrd can be obtained from &cats-boot-img;. A firmware image is provided for the Linksys NSLU2 which will automatically boot debian-installer. This image can be uploaded via the Linksys web frontend or with upslug2. This firmware image can be obtained from &nslu2-firmware-img;. A firmware image is provided for the Thecus N2100 which will automatically boot debian-installer. This image can be installed using the Thecus firmware upgrade process. This firmware image can be obtained from &n2100-firmware-img;. The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install Debian. These images can be obtained from &glantank-firmware-img;. The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install Debian. These images can be obtained from &kuroboxpro-firmware-img;. A firmware image is provided for the HP mv2120 which will automatically boot debian-installer. This image can be installed with uphpmvault on Linux and other systems and with the HP Media Vault Firmware Recovery Utility on Windows. The firmware image can be obtained from &mv2120-firmware-img;. The QNAP Turbo Station (TS-109, TS-209 and TS-409) requires a kernel and ramdisk which can be obtained from &qnap-firmware-img;. A script is provided to write these images to flash.