First, just a note about re-installations. With Debian, a circumstance that will require a complete re-installation of your system is very rare; perhaps mechanical failure of the hard disk would be the most common case. Many common operating systems may require a complete installation to be performed when critical failures take place or for upgrades to new OS versions. Even if a completely new installation isn't required, often the programs you use must be re-installed to operate properly in the new OS. Under &debian;, it is much more likely that your OS can be repaired rather than replaced if things go wrong. Upgrades never require a wholesale installation; you can always upgrade in-place. And the programs are almost always compatible with successive OS releases. If a new program version requires newer supporting software, the Debian packaging system ensures that all the necessary software is automatically identified and installed. The point is, much effort has been put into avoiding the need for re-installation, so think of it as your very last option. The installer is not designed to re-install over an existing system. Here's a road map for the steps you will take during the installation process. Back up any existing data or documents on the hard disk where you plan to install. Gather information about your computer and any needed documentation, before starting the installation. Create partition-able space for Debian on your hard disk. Locate and/or download the installer software and any specialized driver files your machine requires (except Debian CD users). Set up boot tapes/floppies/USB sticks, or place boot files (most Debian CD users can boot from one of the CDs). Boot the installation system. Select installation language. Activate the ethernet network connection, if available. Configure one network interface. Open an ssh connection to the new system. Attach one or more DASDs (Direct Access Storage Device). Create and mount the partitions on which Debian will be installed. Watch the automatic download/install/setup of the base system. Install a boot loader which can start up &debian; and/or your existing system. Load the newly installed system for the first time. If you have problems during the installation, it helps to know which packages are involved in which steps. Introducing the leading software actors in this installation drama: The installer software, debian-installer, is the primary concern of this manual. It detects hardware and loads appropriate drivers, uses dhcp-client to set up the network connection, and runs debootstrap to install the base system packages. Many more actors play smaller parts in this process, but debian-installer has completed its task when you load the new system for the first time. To tune the system to your needs, tasksel allows you to choose to install various predefined bundles of software like a Web server or a Desktop environment. When debian-installer finishes, before the first system load, you have only a very basic command line driven system. The graphical interface which displays windows on your monitor will not be installed unless you select it with tasksel. It's optional because many &debian; systems are servers which don't really have any need for a graphical user interface to do their job. Just be aware that the X system is completely separate from debian-installer, and in fact is much more complicated. Installation and trouble shooting of the X window installation is not within the scope of this manual.