A firmware image is provided for the Thecus N2100 which will automatically boot debian-installer. This image can be installed using the Thecus firmware upgrade process. This firmware image can be obtained from &n2100-firmware-img;. The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install &debian;. These images can be obtained from &glantank-firmware-img;. The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install &debian;. These images can be obtained from &kuroboxpro-firmware-img;. A firmware image is provided for the HP mv2120 which will automatically boot debian-installer. This image can be installed with uphpmvault on Linux and other systems and with the HP Media Vault Firmware Recovery Utility on Windows. The firmware image can be obtained from &mv2120-firmware-img;. The installation files for the QNAP Turbo Station consist of a kernel and ramdisk as well as a script to write these images to flash. You can obtain the installation files for QNAP TS-11x, TS-21x and TS-41x models from &qnap-kirkwood-firmware-img;. The installation files for plug computers (SheevaPlug, GuruPlug, etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can obtain these files from &kirkwood-marvell-firmware-img;.