From a97aa703536535ed5ca6b7ac952ac140491f253b Mon Sep 17 00:00:00 2001 From: Felipe Augusto van de Wiel Date: Wed, 24 Feb 2010 01:14:29 +0000 Subject: [SILENT_COMMIT] Update of POT and PO files for the manual --- po/sv/boot-installer.po | 254 ++++++++++++++--------------- po/sv/install-methods.po | 405 +++++++++++++++++++++++++---------------------- po/sv/using-d-i.po | 350 +++++++++++++++++++++------------------- 3 files changed, 533 insertions(+), 476 deletions(-) (limited to 'po/sv') diff --git a/po/sv/boot-installer.po b/po/sv/boot-installer.po index 65ddabaa7..d99fec0b2 100644 --- a/po/sv/boot-installer.po +++ b/po/sv/boot-installer.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: installation-guide 20051025 boot-installer\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-11-18 01:11+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-11-20 11:02+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" @@ -3025,7 +3025,7 @@ msgstr "" "theme=dark." #. Tag: term -#: boot-installer.xml:2272 boot-installer.xml:2568 +#: boot-installer.xml:2272 boot-installer.xml:2559 #, no-c-format msgid "netcfg/disable_dhcp" msgstr "netcfg/disable_dhcp" @@ -3231,29 +3231,17 @@ msgstr "base-installer/install-recommends (recommends)" #. Tag: para #: boot-installer.xml:2393 -#, no-c-format -msgid "" -"When packages are installed using the package management system, it will by " -"default also install packages that are recommended by those packages. " -"Recommended packages are not strictly required for the core functionality of " -"the selected software, but they do enhance that software and should, in the " -"view of the package maintainers, normally be installed together with that " -"software." -msgstr "" -"När paket installeras med hjälp av pakethanteringssystemet så kommer det " -"även att installera paket som rekommenderas av dessa paket som standard. " -"Rekommenderade paket är inte nödvändiga för grundfunktionaliteten av den " -"valda programvaran men de förbättrar den programvaran och bör, som de " -"paketansvariga anser, oftast installeras tillsammans med den programvaran." - -#. Tag: para -#: boot-installer.xml:2402 -#, no-c-format +#, fuzzy, no-c-format +#| msgid "" +#| "By setting this option to false, the package " +#| "management system will be configured to not automatically install such " +#| "Recommends, both during the installation and for the " +#| "installed system." msgid "" "By setting this option to false, the package " -"management system will be configured to not automatically install such " +"management system will be configured to not automatically install " "Recommends, both during the installation and for the " -"installed system." +"installed system. See also ." msgstr "" "Genom att ställa in denna flagga till false så kommer " "pakethanteringssystemet att konfigureras till att inte automatiskt " @@ -3261,7 +3249,7 @@ msgstr "" "installationen och för det installerade systemet." #. Tag: para -#: boot-installer.xml:2409 +#: boot-installer.xml:2400 #, no-c-format msgid "" "Note that this option allows to have a leaner system, but can also result in " @@ -3278,13 +3266,13 @@ msgstr "" "användare." #. Tag: term -#: boot-installer.xml:2421 +#: boot-installer.xml:2412 #, no-c-format msgid "debian-installer/allow_unauthenticated" msgstr "debian-installer/allow_unauthenticated" #. Tag: para -#: boot-installer.xml:2422 +#: boot-installer.xml:2413 #, no-c-format msgid "" "By default the installer requires that repositories be authenticated using a " @@ -3298,13 +3286,13 @@ msgstr "" "rekommenderas inte." #. Tag: term -#: boot-installer.xml:2433 +#: boot-installer.xml:2424 #, no-c-format msgid "ramdisk_size" msgstr "ramdisk_size" #. Tag: para -#: boot-installer.xml:2434 +#: boot-installer.xml:2425 #, no-c-format msgid "" "This parameter should already be set to a correct value where needed; set it " @@ -3316,13 +3304,13 @@ msgstr "" "ramdisken inte fullständigt gick att läsa in. Värdet är i kB." #. Tag: term -#: boot-installer.xml:2444 +#: boot-installer.xml:2435 #, no-c-format msgid "mouse/protocol" msgstr "mouse/protocol" #. Tag: para -#: boot-installer.xml:2445 +#: boot-installer.xml:2436 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can set the mouse protocol " @@ -3345,13 +3333,13 @@ msgstr "" "standardprotokollet fungera." #. Tag: term -#: boot-installer.xml:2467 +#: boot-installer.xml:2458 #, no-c-format msgid "mouse/device" msgstr "mouse/device" #. Tag: para -#: boot-installer.xml:2468 +#: boot-installer.xml:2459 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can specify the mouse " @@ -3366,13 +3354,13 @@ msgstr "" "userinput>." #. Tag: term -#: boot-installer.xml:2479 +#: boot-installer.xml:2470 #, no-c-format msgid "mouse/left" msgstr "mus/vänster" #. Tag: para -#: boot-installer.xml:2480 +#: boot-installer.xml:2471 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can switch the mouse to " @@ -3384,13 +3372,13 @@ msgstr "" "true." #. Tag: term -#: boot-installer.xml:2489 +#: boot-installer.xml:2480 #, no-c-format msgid "directfb/hw-accel" msgstr "directfb/hw-accel" #. Tag: para -#: boot-installer.xml:2490 +#: boot-installer.xml:2481 #, no-c-format msgid "" "For the gtk frontend (graphical installer), hardware acceleration in " @@ -3402,13 +3390,13 @@ msgstr "" "true för att aktivera det." #. Tag: term -#: boot-installer.xml:2500 +#: boot-installer.xml:2491 #, no-c-format msgid "rescue/enable" msgstr "rescue/enable" #. Tag: para -#: boot-installer.xml:2501 +#: boot-installer.xml:2492 #, no-c-format msgid "" "Set to true to enter rescue mode rather than " @@ -3419,13 +3407,13 @@ msgstr "" "\"/>." #. Tag: title -#: boot-installer.xml:2512 +#: boot-installer.xml:2503 #, no-c-format msgid "Using boot parameters to answer questions" msgstr "Använding av uppstartsparametrar för att besvara frågor" #. Tag: para -#: boot-installer.xml:2513 +#: boot-installer.xml:2504 #, no-c-format msgid "" "With some exceptions, a value can be set at the boot prompt for any question " @@ -3440,25 +3428,25 @@ msgstr "" "exempel listas här nedan." #. Tag: term -#: boot-installer.xml:2525 +#: boot-installer.xml:2516 #, no-c-format msgid "debian-installer/language (language)" msgstr "debian-installer/language (language)" #. Tag: term -#: boot-installer.xml:2526 +#: boot-installer.xml:2517 #, no-c-format msgid "debian-installer/country (country)" msgstr "debian-installer/country (country)" #. Tag: term -#: boot-installer.xml:2527 +#: boot-installer.xml:2518 #, no-c-format msgid "debian-installer/locale (locale)" msgstr "debian-installer/locale (locale)" #. Tag: para -#: boot-installer.xml:2528 +#: boot-installer.xml:2519 #, no-c-format msgid "" "There are two ways to specify the language, country and locale to use for " @@ -3468,7 +3456,7 @@ msgstr "" "installationen och det installerade systemet." #. Tag: para -#: boot-installer.xml:2533 +#: boot-installer.xml:2524 #, no-c-format msgid "" "The first and easiest is to pass only the parameter localelanguage " @@ -3504,13 +3492,13 @@ msgstr "" "locale=sv_SE.UTF-8." #. Tag: term -#: boot-installer.xml:2554 +#: boot-installer.xml:2545 #, no-c-format msgid "anna/choose_modules (modules)" msgstr "anna/choose_modules (modules)" #. Tag: para -#: boot-installer.xml:2555 +#: boot-installer.xml:2546 #, no-c-format msgid "" "Can be used to automatically load installer components that are not loaded " @@ -3527,7 +3515,7 @@ msgstr "" "phrase>." #. Tag: para -#: boot-installer.xml:2569 +#: boot-installer.xml:2560 #, no-c-format msgid "" "Set to true if you want to disable DHCP and instead " @@ -3537,13 +3525,13 @@ msgstr "" "istället tvinga fram statisk nätverkskonfiguration." #. Tag: term -#: boot-installer.xml:2578 +#: boot-installer.xml:2569 #, no-c-format msgid "mirror/protocol (protocol)" msgstr "mirror/protocol (protocol)" #. Tag: para -#: boot-installer.xml:2579 +#: boot-installer.xml:2570 #, no-c-format msgid "" "By default the installer will use the http protocol to download files from " @@ -3561,13 +3549,13 @@ msgstr "" "spegel från en lista, du måste ange värdnamnet manuellt." #. Tag: term -#: boot-installer.xml:2592 +#: boot-installer.xml:2583 #, no-c-format msgid "tasksel:tasksel/first (tasks)" msgstr "tasksel:tasksel/first (tasks)" #. Tag: para -#: boot-installer.xml:2593 +#: boot-installer.xml:2584 #, no-c-format msgid "" "Can be used to select tasks that are not available from the interactive task " @@ -3579,13 +3567,13 @@ msgstr "" "literal>. Se för ytterligare information." #. Tag: title -#: boot-installer.xml:2607 +#: boot-installer.xml:2598 #, no-c-format msgid "Passing parameters to kernel modules" msgstr "Skicka parametrar till kärnmoduler" #. Tag: para -#: boot-installer.xml:2608 +#: boot-installer.xml:2599 #, no-c-format msgid "" "If drivers are compiled into the kernel, you can pass parameters to them as " @@ -3610,7 +3598,7 @@ msgstr "" "konfigurationen för det installerade systemet." #. Tag: para -#: boot-installer.xml:2621 +#: boot-installer.xml:2612 #, no-c-format msgid "" "Note that it is now quite rare that parameters need to be passed to modules. " @@ -3624,7 +3612,7 @@ msgstr "" "i vissa fall, kan det fortfarande krävas att parametrar ställs in manuellt." #. Tag: para -#: boot-installer.xml:2628 +#: boot-installer.xml:2619 #, no-c-format msgid "" "The syntax to use to set parameters for modules is: " @@ -3646,19 +3634,19 @@ msgstr "" "(coax) och IRQ 10, skulle du skicka:" #. Tag: screen -#: boot-installer.xml:2638 +#: boot-installer.xml:2629 #, no-c-format msgid "3c509.xcvr=3 3c509.irq=10" msgstr "3c509.xcvr=3 3c509.irq=10" #. Tag: title -#: boot-installer.xml:2644 +#: boot-installer.xml:2635 #, no-c-format msgid "Blacklisting kernel modules" msgstr "Svartlistning av kärnmoduler" #. Tag: para -#: boot-installer.xml:2645 +#: boot-installer.xml:2636 #, no-c-format msgid "" "Sometimes it may be necessary to blacklist a module to prevent it from being " @@ -3676,7 +3664,7 @@ msgstr "" "drivrutin läses in först." #. Tag: para -#: boot-installer.xml:2654 +#: boot-installer.xml:2645 #, no-c-format msgid "" "You can blacklist a module using the following syntax: " @@ -3692,7 +3680,7 @@ msgstr "" "installerade systemet." #. Tag: para -#: boot-installer.xml:2662 +#: boot-installer.xml:2653 #, no-c-format msgid "" "Note that a module may still be loaded by the installation system itself. " @@ -3706,19 +3694,19 @@ msgstr "" "som visas under maskinvaruidentifieringsfaserna." #. Tag: title -#: boot-installer.xml:2679 +#: boot-installer.xml:2670 #, no-c-format msgid "Troubleshooting the Installation Process" msgstr "Felsök installationsprocessen" #. Tag: title -#: boot-installer.xml:2684 +#: boot-installer.xml:2675 #, no-c-format msgid "CD-ROM Reliability" msgstr "Tillförlitlighet för cd-rom" #. Tag: para -#: boot-installer.xml:2685 +#: boot-installer.xml:2676 #, no-c-format msgid "" "Sometimes, especially with older CD-ROM drives, the installer may fail to " @@ -3733,7 +3721,7 @@ msgstr "" "installationen." #. Tag: para -#: boot-installer.xml:2692 +#: boot-installer.xml:2683 #, no-c-format msgid "" "There are many different possible causes for these problems. We can only " @@ -3745,13 +3733,13 @@ msgstr "" "hanterar dem. Resten är upp till dig." #. Tag: para -#: boot-installer.xml:2698 +#: boot-installer.xml:2689 #, no-c-format msgid "There are two very simple things that you should try first." msgstr "Det finns två mycket enkla saker som du bör prova först." #. Tag: para -#: boot-installer.xml:2703 +#: boot-installer.xml:2694 #, no-c-format msgid "" "If the CD-ROM does not boot, check that it was inserted correctly and that " @@ -3761,7 +3749,7 @@ msgstr "" "att den inte är smutsig." #. Tag: para -#: boot-installer.xml:2709 +#: boot-installer.xml:2700 #, no-c-format msgid "" "If the installer fails to recognize a CD-ROM, try just running the option " @@ -3775,7 +3763,7 @@ msgstr "" "äldre cd-rom-enheter kan lösas på detta sätt." #. Tag: para -#: boot-installer.xml:2719 +#: boot-installer.xml:2710 #, no-c-format msgid "" "If this does not work, then try the suggestions in the subsections below. " @@ -3787,7 +3775,7 @@ msgstr "" "termen cd-rom för enkelhet." #. Tag: para -#: boot-installer.xml:2725 +#: boot-installer.xml:2716 #, no-c-format msgid "" "If you cannot get the installation working from CD-ROM, try one of the other " @@ -3797,13 +3785,13 @@ msgstr "" "andra installationsmetoderna som finns tillgängliga." #. Tag: title -#: boot-installer.xml:2733 +#: boot-installer.xml:2724 #, no-c-format msgid "Common issues" msgstr "Vanliga problem" #. Tag: para -#: boot-installer.xml:2736 +#: boot-installer.xml:2727 #, no-c-format msgid "" "Some older CD-ROM drives do not support reading from discs that were burned " @@ -3813,7 +3801,7 @@ msgstr "" "brända med höga hastigheter med en modern cd-brännare." #. Tag: para -#: boot-installer.xml:2742 +#: boot-installer.xml:2733 #, no-c-format msgid "" "If your system boots correctly from the CD-ROM, it does not necessarily mean " @@ -3825,7 +3813,7 @@ msgstr "" "cd-rom-enhet är ansluten till)." #. Tag: para -#: boot-installer.xml:2749 +#: boot-installer.xml:2740 #, no-c-format msgid "" "Some older CD-ROM drives do not work correctly if direct memory " @@ -3835,20 +3823,20 @@ msgstr "" "minnesåtkomst (DMA) är aktiverat." #. Tag: title -#: boot-installer.xml:2760 +#: boot-installer.xml:2751 #, no-c-format msgid "How to investigate and maybe solve issues" msgstr "Hur man undersöker och kanske även löser problem" #. Tag: para -#: boot-installer.xml:2761 +#: boot-installer.xml:2752 #, no-c-format msgid "If the CD-ROM fails to boot, try the suggestions listed below." msgstr "" "Prova förslagen som listas här nedan om uppstart med cd-rom misslyckas." #. Tag: para -#: boot-installer.xml:2766 +#: boot-installer.xml:2757 #, no-c-format msgid "" "Check that your BIOS actually supports booting from CD-ROM (older systems " @@ -3859,7 +3847,7 @@ msgstr "" "som du använder." #. Tag: para -#: boot-installer.xml:2772 +#: boot-installer.xml:2763 #, no-c-format msgid "" "If you downloaded an iso image, check that the md5sum of that image matches " @@ -3886,7 +3874,7 @@ msgstr "" "skivan." #. Tag: screen -#: boot-installer.xml:2785 +#: boot-installer.xml:2776 #, no-c-format msgid "" "$ dd if=/dev/cdrom | \\\n" @@ -3908,7 +3896,7 @@ msgstr "" "134486016 bytes (134 MB) kopierade, 97.474 sekunder, 1.4 MB/s" #. Tag: para -#: boot-installer.xml:2790 +#: boot-installer.xml:2781 #, no-c-format msgid "" "If, after the installer has been booted successfully, the CD-ROM is not " @@ -3929,7 +3917,7 @@ msgstr "" "aktivera skalet där." #. Tag: para -#: boot-installer.xml:2802 +#: boot-installer.xml:2793 #, no-c-format msgid "" "Switch to VT4 or view the contents of /var/log/syslog " @@ -3942,7 +3930,7 @@ msgstr "" "command>." #. Tag: para -#: boot-installer.xml:2809 +#: boot-installer.xml:2800 #, no-c-format msgid "" "Check in the output of dmesg if your CD-ROM drive was " @@ -3972,7 +3960,7 @@ msgstr "" "kan du prova att läsa in den manuellt med modprobe." #. Tag: para -#: boot-installer.xml:2823 +#: boot-installer.xml:2814 #, no-c-format msgid "" "Check that there is a device node for your CD-ROM drive under /dev/" @@ -3984,7 +3972,7 @@ msgstr "" "filename>. Det bör även finnas en /dev/cdrom." #. Tag: para -#: boot-installer.xml:2831 +#: boot-installer.xml:2822 #, no-c-format msgid "" "Use the mount command to check if the CD-ROM is already " @@ -4001,7 +3989,7 @@ msgstr "" "körning av kommandot." #. Tag: para -#: boot-installer.xml:2841 +#: boot-installer.xml:2832 #, no-c-format msgid "" "Check if DMA is currently enabled: \n" @@ -4027,7 +4015,7 @@ msgstr "" "motsvarar din cd-rom-enhet." #. Tag: para -#: boot-installer.xml:2856 +#: boot-installer.xml:2847 #, no-c-format msgid "" "If there are any problems during the installation, try checking the " @@ -4041,13 +4029,13 @@ msgstr "" "som ett allmänt test för att se om cd-skivan kan läsas tillförlitligt." #. Tag: title -#: boot-installer.xml:2871 +#: boot-installer.xml:2862 #, no-c-format msgid "Floppy Disk Reliability" msgstr "Tillförlitlighet för disketter" #. Tag: para -#: boot-installer.xml:2873 +#: boot-installer.xml:2864 #, no-c-format msgid "" "The biggest problem for people using floppy disks to install Debian seems to " @@ -4057,7 +4045,7 @@ msgstr "" "Debian verkar vara pålitligheten för disketterna." #. Tag: para -#: boot-installer.xml:2878 +#: boot-installer.xml:2869 #, no-c-format msgid "" "The boot floppy is the floppy with the worst problems, because it is read by " @@ -4075,7 +4063,7 @@ msgstr "" "som stora mängder av meddelanden om in/ut-fel." #. Tag: para -#: boot-installer.xml:2887 +#: boot-installer.xml:2878 #, no-c-format msgid "" "If you are having the installation stall at a particular floppy, the first " @@ -4093,7 +4081,7 @@ msgstr "" "användbart att försöka att skriva disketten på en annan dator." #. Tag: para -#: boot-installer.xml:2896 +#: boot-installer.xml:2887 #, no-c-format msgid "" "One user reports he had to write the images to floppy threefasta programvaran." #. Tag: title -#: boot-installer.xml:2917 +#: boot-installer.xml:2908 #, no-c-format msgid "Boot Configuration" msgstr "Uppstartskonfiguration" #. Tag: para -#: boot-installer.xml:2919 +#: boot-installer.xml:2910 #, no-c-format msgid "" "If you have problems and the kernel hangs during the boot process, doesn't " @@ -4150,7 +4138,7 @@ msgstr "" "kontrollera, vilket diskuteras i ." #. Tag: para -#: boot-installer.xml:2926 +#: boot-installer.xml:2917 #, no-c-format msgid "" "Often, problems can be solved by removing add-ons and peripherals, and then " @@ -4162,7 +4150,7 @@ msgstr "" "och enheter med plug-n-play kan vara speciellt problematiska." #. Tag: para -#: boot-installer.xml:2932 +#: boot-installer.xml:2923 #, no-c-format msgid "" "If you have a large amount of memory installed in your machine, more than " @@ -4176,13 +4164,13 @@ msgstr "" "ser, såsom mem=512m." #. Tag: title -#: boot-installer.xml:2943 boot-installer.xml:3045 +#: boot-installer.xml:2934 boot-installer.xml:3036 #, no-c-format msgid "Common &arch-title; Installation Problems" msgstr "Vanliga installationsproblem på &arch-title;" #. Tag: para -#: boot-installer.xml:2944 +#: boot-installer.xml:2935 #, no-c-format msgid "" "There are some common installation problems that can be solved or avoided by " @@ -4192,7 +4180,7 @@ msgstr "" "genom att skicka med vissa uppstartsparametrar till installationsprogrammet." #. Tag: para -#: boot-installer.xml:2949 +#: boot-installer.xml:2940 #, no-c-format msgid "" "Some systems have floppies with inverted DCLs. If you receive " @@ -4204,7 +4192,7 @@ msgstr "" "parametern floppy=thinkpad." #. Tag: para -#: boot-installer.xml:2955 +#: boot-installer.xml:2946 #, no-c-format msgid "" "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk " @@ -4224,7 +4212,7 @@ msgstr "" "replaceable>." #. Tag: para -#: boot-installer.xml:2964 +#: boot-installer.xml:2955 #, no-c-format msgid "" "If you have a very old machine, and the kernel hangs after saying " @@ -4238,7 +4226,7 @@ msgstr "" "här testet." #. Tag: para -#: boot-installer.xml:2971 +#: boot-installer.xml:2962 #, no-c-format msgid "" "Some systems (especially laptops) that have a native resolution that is not " @@ -4265,7 +4253,7 @@ msgstr "" "uppstartsparametern fb=false." #. Tag: para -#: boot-installer.xml:2989 +#: boot-installer.xml:2980 #, no-c-format msgid "" "If your screen begins to show a weird picture while the kernel boots, eg. " @@ -4285,13 +4273,13 @@ msgstr "" "konsollfunktioner. Se för detaljer." #. Tag: title -#: boot-installer.xml:3003 +#: boot-installer.xml:2994 #, no-c-format msgid "System Freeze During the PCMCIA Configuration Phase" msgstr "Systemet fryser under konfigurationsfasen för PCMCIA" #. Tag: para -#: boot-installer.xml:3004 +#: boot-installer.xml:2995 #, no-c-format msgid "" "Some laptop models produced by Dell are known to crash when PCMCIA device " @@ -4312,7 +4300,7 @@ msgstr "" "problemen." #. Tag: para -#: boot-installer.xml:3014 +#: boot-installer.xml:3005 #, no-c-format msgid "" "Alternatively, you can boot the installer in expert mode. You will then be " @@ -4335,13 +4323,13 @@ msgstr "" "installationsprogrammet." #. Tag: title -#: boot-installer.xml:3031 +#: boot-installer.xml:3022 #, no-c-format msgid "System Freeze while Loading USB Modules" msgstr "Systemfrysning vid inläsning av USB-moduler" #. Tag: para -#: boot-installer.xml:3032 +#: boot-installer.xml:3023 #, no-c-format msgid "" "The kernel normally tries to install USB modules and the USB keyboard driver " @@ -4359,19 +4347,19 @@ msgstr "" "att skicka med parametern nousb vid uppstartsprompten." #. Tag: para -#: boot-installer.xml:3046 +#: boot-installer.xml:3037 #, no-c-format msgid "There are some common installation problems that are worth mentioning." msgstr "Det finns några vanliga installationsproblem som är värda att nämna." #. Tag: title -#: boot-installer.xml:3052 +#: boot-installer.xml:3043 #, no-c-format msgid "Misdirected video output" msgstr "Felriktad videoutmatning" #. Tag: para -#: boot-installer.xml:3053 +#: boot-installer.xml:3044 #, no-c-format msgid "" "It is fairly common for &arch-title; to have two video cards in one machine, " @@ -4399,7 +4387,7 @@ msgstr "" "installationsprogrammet med video=atyfb:off." #. Tag: para -#: boot-installer.xml:3067 +#: boot-installer.xml:3058 #, no-c-format msgid "" "Note that you may also have to manually add this parameter to the silo " @@ -4413,13 +4401,13 @@ msgstr "" "i /etc/X11/xorg.conf." #. Tag: title -#: boot-installer.xml:3078 +#: boot-installer.xml:3069 #, no-c-format msgid "Failure to Boot or Install from CD-ROM" msgstr "Misslyckad uppstart eller installation från cd-rom" #. Tag: para -#: boot-installer.xml:3079 +#: boot-installer.xml:3070 #, no-c-format msgid "" "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if " @@ -4431,7 +4419,7 @@ msgstr "" "flesta problemen har rapporterats med SunBlade-system." #. Tag: para -#: boot-installer.xml:3085 +#: boot-installer.xml:3076 #, no-c-format msgid "We recommend to install such systems by netbooting the installer." msgstr "" @@ -4439,13 +4427,13 @@ msgstr "" "installationsprogrammet." #. Tag: title -#: boot-installer.xml:3094 +#: boot-installer.xml:3085 #, no-c-format msgid "Interpreting the Kernel Startup Messages" msgstr "Tolkning av kärnans uppstartsmeddelanden" #. Tag: para -#: boot-installer.xml:3096 +#: boot-installer.xml:3087 #, no-c-format msgid "" "During the boot sequence, you may see many messages in the form " @@ -4482,13 +4470,13 @@ msgstr "" "\"/>)." #. Tag: title -#: boot-installer.xml:3121 +#: boot-installer.xml:3112 #, no-c-format msgid "Reporting Installation Problems" msgstr "Rapportering av installationsproblem" #. Tag: para -#: boot-installer.xml:3122 +#: boot-installer.xml:3113 #, no-c-format msgid "" "If you get through the initial boot phase but cannot complete the install, " @@ -4508,7 +4496,7 @@ msgstr "" "in en felrapport kan du bifoga den här informationen i felrapporten." #. Tag: para -#: boot-installer.xml:3133 +#: boot-installer.xml:3124 #, no-c-format msgid "" "Other pertinent installation messages may be found in /var/log/." #. Tag: para -#: boot-installer.xml:3168 +#: boot-installer.xml:3159 #, no-c-format msgid "" "Alternatively you can use this template when filling out installation " @@ -4663,6 +4651,20 @@ msgstr "" "inklusive de sista meddelandena från kärnan om problemet var att kärnan " "hängde sig. Beskriv de steg du tog som slutade i att systemet fick problem." +#~ msgid "" +#~ "When packages are installed using the package management system, it will " +#~ "by default also install packages that are recommended by those packages. " +#~ "Recommended packages are not strictly required for the core functionality " +#~ "of the selected software, but they do enhance that software and should, " +#~ "in the view of the package maintainers, normally be installed together " +#~ "with that software." +#~ msgstr "" +#~ "När paket installeras med hjälp av pakethanteringssystemet så kommer det " +#~ "även att installera paket som rekommenderas av dessa paket som standard. " +#~ "Rekommenderade paket är inte nödvändiga för grundfunktionaliteten av den " +#~ "valda programvaran men de förbättrar den programvaran och bör, som de " +#~ "paketansvariga anser, oftast installeras tillsammans med den programvaran." + #~ msgid "" #~ "Can be used to set both the language and country for the installation. " #~ "This will only work if the locale is supported in Debian. For example, " diff --git a/po/sv/install-methods.po b/po/sv/install-methods.po index 8fb9ee236..d01f9dd42 100644 --- a/po/sv/install-methods.po +++ b/po/sv/install-methods.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: install-methods\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-11-18 01:11+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-11-20 10:20+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" @@ -1572,25 +1572,25 @@ msgstr "" "hårddisksikonen)." #. Tag: filename -#: install-methods.xml:1034 install-methods.xml:1372 +#: install-methods.xml:1034 install-methods.xml:1361 #, no-c-format msgid "vmlinux" msgstr "vmlinux" #. Tag: filename -#: install-methods.xml:1039 install-methods.xml:1377 +#: install-methods.xml:1039 install-methods.xml:1366 #, no-c-format msgid "initrd.gz" msgstr "initrd.gz" #. Tag: filename -#: install-methods.xml:1044 install-methods.xml:1382 +#: install-methods.xml:1044 install-methods.xml:1371 #, no-c-format msgid "yaboot" msgstr "yaboot" #. Tag: filename -#: install-methods.xml:1049 install-methods.xml:1387 +#: install-methods.xml:1049 install-methods.xml:1376 #, no-c-format msgid "yaboot.conf" msgstr "yaboot.conf" @@ -1728,21 +1728,29 @@ msgstr "" "tftpd-hpa." #. Tag: title -#: install-methods.xml:1142 +#: install-methods.xml:1141 #, no-c-format msgid "Setting up RARP server" msgstr "Konfigurering av RARP-server" #. Tag: para -#: install-methods.xml:1143 -#, no-c-format +#: install-methods.xml:1142 +#, fuzzy, no-c-format +#| msgid "" +#| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " +#| "address) of the client computers to be installed. If you don't know this " +#| "information, you can pick it off the initial " +#| "OpenPROM boot messages, use the OpenBoot .enet-addr command, or boot into Rescue mode (e." +#| "g., from the rescue floppy) and use the command /sbin/ifconfig " +#| "eth0." msgid "" "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " "address) of the client computers to be installed. If you don't know this " "information, you can pick it off the initial " "OpenPROM boot messages, use the OpenBoot .enet-addr " "command, or boot into Rescue mode (e.g., from the " -"rescue floppy) and use the command /sbin/ifconfig eth0ip addr show dev eth0." msgstr "" "För att ställa in RARP behöver du veta Ethernet-adressen (även kallad MAC-" @@ -1754,7 +1762,7 @@ msgstr "" "/sbin/ifconfig eth0." #. Tag: para -#: install-methods.xml:1155 +#: install-methods.xml:1154 #, no-c-format msgid "" "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, " @@ -1778,121 +1786,13 @@ msgstr "" "eller /usr/etc/rarpd -a på SunOS 4 (Solaris 1)." #. Tag: title -#: install-methods.xml:1177 -#, no-c-format -msgid "Setting up a BOOTP server" -msgstr "Konfigurera en BOOTP-server" - -#. Tag: para -#: install-methods.xml:1178 -#, no-c-format -msgid "" -"There are two BOOTP servers available for GNU/Linux. The first is CMU " -"bootpd. The other is actually a DHCP server: ISC " -"dhcpd. In &debian; these are contained in the " -"bootp and dhcp3-server " -"packages respectively." -msgstr "" -"Det finns två BOOTP-servrar tillgängliga för GNU/Linux. Den första är CMU " -"bootpd. Den andra är faktiskt en DHCP-server: ISC " -"dhcpd. I &debian; finns dessa i paketen bootp respektive dhcp3-server." - -#. Tag: para -#: install-methods.xml:1186 -#, no-c-format -msgid "" -"To use CMU bootpd, you must first uncomment (or add) the " -"relevant line in /etc/inetd.conf. On &debian;, you can " -"run update-inetd --enable bootps, then /" -"etc/init.d/inetd reload to do so. Just in case your BOOTP server " -"does not run Debian, the line in question should look like: " -"\n" -"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" -" Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " -"good old BSD printcap, termcap, " -"and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " -"Here is an example /etc/bootptab: " -"\n" -"client:\\\n" -" hd=/tftpboot:\\\n" -" bf=tftpboot.img:\\\n" -" ip=192.168.1.90:\\\n" -" sm=255.255.255.0:\\\n" -" sa=192.168.1.1:\\\n" -" ha=0123456789AB:\n" -" You will need to change at least the ha option, which specifies the hardware address of the client. The " -"bf option specifies the file a client should retrieve via " -"TFTP; see for more details. On SGI machines you can just enter the command monitor and type " -"printenv. The value of the eaddr variable is the machine's MAC address. " -msgstr "" -"För att använda CMU bootpd, måste du först kommentera " -"bort (eller lägga till) den relevanta raden i /etc/inetd.conf. På &debian; kan du köra update-inetd --enable bootps, sedan /etc/init.d/inetd reload för att " -"göra det. Om din BOOTP-server inte kör Debian, bör raden i fråga se ut så " -"här: \n" -"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" -" Nu måste du skapa filen /etc/bootptab. Den har samma sorts familjära och kryptiska format som de gamla " -"goda BSD-filerna printcap, termcap " -"och disktab. Se manualsidan för bootptab för mer information. För CMU bootpd behöver du " -"känna till maskinvaruadressen (MAC) för klienten. Här är ett exempel på en " -"/etc/bootptab: \n" -"client:\\\n" -" hd=/tftpboot:\\\n" -" bf=tftpboot.img:\\\n" -" ip=192.168.1.90:\\\n" -" sm=255.255.255.0:\\\n" -" sa=192.168.1.1:\\\n" -" ha=0123456789AB:\n" -" Du behöver ändra åtminstone alternativet " -"ha, som anger maskinvaruadressen för klienten. Alternativet " -"bf anger filen som klienten bör hämta via TFTP; se för mer detaljer. På SGI-" -"maskiner kan du bara gå in kommandomonitorn och skriva printenv. Värdet för variabeln eaddr är maskinens " -"MAC-adress. " - -#. Tag: para -#: install-methods.xml:1219 -#, no-c-format -msgid "" -"By contrast, setting up BOOTP with ISC dhcpd is really " -"easy, because it treats BOOTP clients as a moderately special case of DHCP " -"clients. Some architectures require a complex configuration for booting " -"clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " -"adding the allow bootp directive to the configuration " -"block for the subnet containing the client in /etc/dhcp3/dhcpd." -"conf, and restart dhcpd with /etc/" -"init.d/dhcpd3-server restart." -msgstr "" -"Tvärtemot är konfigurering av BOOTP med ISC dhcpd riktigt " -"enkelt, för att den behandlar BOOTP-klienter som vanliga specialfall av DHCP-" -"klienter. Vissa arkitekturer kräver en komplex konfiguration för att starta " -"upp klienter via BOOTP. Om din dator är en av dessa, läs avsnittet . Om inte, kommer du antagligen komma undan med att bara " -"lägga till direktivet allow bootp till " -"konfigurationsblocket för subnätet som innehåller klienten i /etc/" -"dhcp3/dhcpd.conf, och starta om dhcpd med " -"/etc/init.d/dhcpd3-server restart." - -#. Tag: title -#: install-methods.xml:1241 +#: install-methods.xml:1175 #, no-c-format msgid "Setting up a DHCP server" msgstr "Konfigurering av DHCP-server" #. Tag: para -#: install-methods.xml:1242 +#: install-methods.xml:1176 #, no-c-format msgid "" "One free software DHCP server is ISC dhcpd. For &debian;, " @@ -1906,7 +1806,7 @@ msgstr "" "filename>):" #. Tag: screen -#: install-methods.xml:1249 +#: install-methods.xml:1183 #, no-c-format msgid "" "option domain-name \"example.com\";\n" @@ -1950,7 +1850,7 @@ msgstr "" "}" #. Tag: para -#: install-methods.xml:1251 +#: install-methods.xml:1185 #, no-c-format msgid "" "In this example, there is one server servername " @@ -1968,7 +1868,7 @@ msgstr "" "hämtas via TFTP." #. Tag: para -#: install-methods.xml:1261 +#: install-methods.xml:1195 #, no-c-format msgid "" "After you have edited the dhcpd configuration file, " @@ -1978,13 +1878,13 @@ msgstr "" "starta om den med /etc/init.d/dhcpd3-server restart." #. Tag: title -#: install-methods.xml:1269 +#: install-methods.xml:1203 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "Aktivera PXE-uppstart i DHCP-konfigurationen" #. Tag: para -#: install-methods.xml:1270 +#: install-methods.xml:1204 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-" @@ -2055,33 +1955,140 @@ msgstr "" "kärnavbildning (se nedan)." #. Tag: title -#: install-methods.xml:1286 +#: install-methods.xml:1224 +#, no-c-format +msgid "Setting up a BOOTP server" +msgstr "Konfigurera en BOOTP-server" + +#. Tag: para +#: install-methods.xml:1225 +#, no-c-format +msgid "" +"There are two BOOTP servers available for GNU/Linux. The first is CMU " +"bootpd. The other is actually a DHCP server: ISC " +"dhcpd. In &debian; these are contained in the " +"bootp and dhcp3-server " +"packages respectively." +msgstr "" +"Det finns två BOOTP-servrar tillgängliga för GNU/Linux. Den första är CMU " +"bootpd. Den andra är faktiskt en DHCP-server: ISC " +"dhcpd. I &debian; finns dessa i paketen bootp respektive dhcp3-server." + +#. Tag: para +#: install-methods.xml:1233 +#, no-c-format +msgid "" +"To use CMU bootpd, you must first uncomment (or add) the " +"relevant line in /etc/inetd.conf. On &debian;, you can " +"run update-inetd --enable bootps, then /" +"etc/init.d/inetd reload to do so. Just in case your BOOTP server " +"does not run Debian, the line in question should look like: " +"\n" +"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" +" Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " +"good old BSD printcap, termcap, " +"and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " +"Here is an example /etc/bootptab: " +"\n" +"client:\\\n" +" hd=/tftpboot:\\\n" +" bf=tftpboot.img:\\\n" +" ip=192.168.1.90:\\\n" +" sm=255.255.255.0:\\\n" +" sa=192.168.1.1:\\\n" +" ha=0123456789AB:\n" +" You will need to change at least the ha option, which specifies the hardware address of the client. The " +"bf option specifies the file a client should retrieve via " +"TFTP; see for more details. On SGI machines you can just enter the command monitor and type " +"printenv. The value of the eaddr variable is the machine's MAC address. " +msgstr "" +"För att använda CMU bootpd, måste du först kommentera " +"bort (eller lägga till) den relevanta raden i /etc/inetd.conf. På &debian; kan du köra update-inetd --enable bootps, sedan /etc/init.d/inetd reload för att " +"göra det. Om din BOOTP-server inte kör Debian, bör raden i fråga se ut så " +"här: \n" +"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" +" Nu måste du skapa filen /etc/bootptab. Den har samma sorts familjära och kryptiska format som de gamla " +"goda BSD-filerna printcap, termcap " +"och disktab. Se manualsidan för bootptab för mer information. För CMU bootpd behöver du " +"känna till maskinvaruadressen (MAC) för klienten. Här är ett exempel på en " +"/etc/bootptab: \n" +"client:\\\n" +" hd=/tftpboot:\\\n" +" bf=tftpboot.img:\\\n" +" ip=192.168.1.90:\\\n" +" sm=255.255.255.0:\\\n" +" sa=192.168.1.1:\\\n" +" ha=0123456789AB:\n" +" Du behöver ändra åtminstone alternativet " +"ha, som anger maskinvaruadressen för klienten. Alternativet " +"bf anger filen som klienten bör hämta via TFTP; se för mer detaljer. På SGI-" +"maskiner kan du bara gå in kommandomonitorn och skriva printenv. Värdet för variabeln eaddr är maskinens " +"MAC-adress. " + +#. Tag: para +#: install-methods.xml:1266 +#, no-c-format +msgid "" +"By contrast, setting up BOOTP with ISC dhcpd is really " +"easy, because it treats BOOTP clients as a moderately special case of DHCP " +"clients. Some architectures require a complex configuration for booting " +"clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " +"adding the allow bootp directive to the configuration " +"block for the subnet containing the client in /etc/dhcp3/dhcpd." +"conf, and restart dhcpd with /etc/" +"init.d/dhcpd3-server restart." +msgstr "" +"Tvärtemot är konfigurering av BOOTP med ISC dhcpd riktigt " +"enkelt, för att den behandlar BOOTP-klienter som vanliga specialfall av DHCP-" +"klienter. Vissa arkitekturer kräver en komplex konfiguration för att starta " +"upp klienter via BOOTP. Om din dator är en av dessa, läs avsnittet . Om inte, kommer du antagligen komma undan med att bara " +"lägga till direktivet allow bootp till " +"konfigurationsblocket för subnätet som innehåller klienten i /etc/" +"dhcp3/dhcpd.conf, och starta om dhcpd med " +"/etc/init.d/dhcpd3-server restart." + +#. Tag: title +#: install-methods.xml:1285 #, no-c-format msgid "Enabling the TFTP Server" msgstr "Aktivering av TFTP-server" #. Tag: para -#: install-methods.xml:1287 +#: install-methods.xml:1286 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that " -"tftpd is enabled. This is usually enabled by having " -"something like the following line in /etc/inetd.conf: " -"\n" -"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" -" Debian packages will in general set this up " -"correctly by default when they are installed." +"tftpd is enabled." msgstr "" -"För att få TFTP-servern klar att köra, bör du först se till att " -"tftpd är aktiverad. Den aktiveras normalt sett genom att " -"ha en rad som liknar följande rad i /etc/inetd.conf: " -"\n" -"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" -" Debian-paketen kommer normalt sett att ställa in " -"det korrekt som standard när de installeras." #. Tag: para -#: install-methods.xml:1299 +#: install-methods.xml:1291 +#, no-c-format +msgid "" +"In the case of tftpd-hpa there are two ways the " +"service can be run. It can be started on demand by the system's " +"inetd daemon, or it can be set up to run as an " +"independent daemon. Which of these methods is used is selected when the " +"package is installed and can be changed by reconfiguring the package." +msgstr "" + +#. Tag: para +#: install-methods.xml:1300 #, no-c-format msgid "" "Historically, TFTP servers used /tftpboot as directory " @@ -2099,39 +2106,18 @@ msgstr "" "justera konfigurationsexemplen i det här avsnittet." #. Tag: para -#: install-methods.xml:1309 +#: install-methods.xml:1310 #, no-c-format msgid "" -"Look in /etc/inetd.conf and remember the directory " -"which is used as the argument of in.tftpd " -" All in.tftpd alternatives available in Debian " -"should log TFTP requests to the system logs by default. Some of them support " -"a -v argument to increase verbosity. It is " -"recommended to check these log messages in case of boot problems as they are " -"a good starting point for diagnosing the cause of errors. ; you'll need that below. If you've had to change /etc/" -"inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run " -"/etc/init.d/inetd reload; on other machines, find out " -"the process ID for inetd, and run kill -HUP " -"inetd-pid." +"All in.tftpd alternatives available in Debian should log " +"TFTP requests to the system logs by default. Some of them support a " +"-v argument to increase verbosity. It is recommended " +"to check these log messages in case of boot problems as they are a good " +"starting point for diagnosing the cause of errors." msgstr "" -"Leta i filen /etc/inetd.conf och kom ihåg katalogen som " -"används som argument till in.tftpd Alla " -"alternativ till in.tftpd i Debian ska som standard logga " -"TFTP-begäran till systemloggarna. Några av dem har stöd för argumentet " -"-v för att öka informationsnivån. Det rekommenderas " -"att kontrollera dessa loggmeddelanden om uppstartsproblem inträffar eftersom " -"de är en bra startpunkt för att diagnostisera problem. ; " -"du behöver det senare. Om du behövde ändra /etc/inetd.conf, behöver du meddela till den körande inetd-" -"processen att filen har ändrats. På en Debian-maskin, kör /etc/" -"init.d/inetd reload; på andra maskiner, ta reda på vilket " -"process-id som inetd har och kör sedan kill -" -"HUP inetd-pid." #. Tag: para -#: install-methods.xml:1329 +#: install-methods.xml:1318 #, no-c-format msgid "" "If you intend to install Debian on an SGI machine and your TFTP server is a " @@ -2162,13 +2148,13 @@ msgstr "" "Linux TFTP-server använder." #. Tag: title -#: install-methods.xml:1351 +#: install-methods.xml:1340 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "Flytta TFTP-avbildningarna till rätt plats" #. Tag: para -#: install-methods.xml:1352 +#: install-methods.xml:1341 #, no-c-format msgid "" "Next, place the TFTP boot image you need, as found in :" #. Tag: filename -#: install-methods.xml:1392 +#: install-methods.xml:1381 #, no-c-format msgid "boot.msg" msgstr "boot.msg" #. Tag: para -#: install-methods.xml:1397 +#: install-methods.xml:1386 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " @@ -2224,7 +2210,7 @@ msgstr "" "uppstart." #. Tag: para -#: install-methods.xml:1405 +#: install-methods.xml:1394 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " @@ -2240,13 +2226,13 @@ msgstr "" "efi till tftpd som filnamnet att starta upp på." #. Tag: title -#: install-methods.xml:1417 +#: install-methods.xml:1406 #, no-c-format msgid "SPARC TFTP Booting" msgstr "Uppstart via TFTP för SPARC" #. Tag: para -#: install-methods.xml:1418 +#: install-methods.xml:1407 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as " @@ -2278,7 +2264,7 @@ msgstr "" "underarkitekturens namn." #. Tag: para -#: install-methods.xml:1434 +#: install-methods.xml:1423 #, no-c-format msgid "" "If you've done all this correctly, giving the command boot netbootpd to supply the " @@ -2326,13 +2312,13 @@ msgstr "" "filename= i /etc/dhcpd.conf." #. Tag: title -#: install-methods.xml:1561 +#: install-methods.xml:1550 #, no-c-format msgid "Automatic Installation" msgstr "Automatisk installation" #. Tag: para -#: install-methods.xml:1562 +#: install-methods.xml:1551 #, no-c-format msgid "" "For installing on multiple computers it's possible to do fully automatic " @@ -2348,13 +2334,13 @@ msgstr "" "classname>, och själva Debian Installer." #. Tag: title -#: install-methods.xml:1575 +#: install-methods.xml:1564 #, no-c-format msgid "Automatic Installation Using the Debian Installer" msgstr "Automatisk installation med Debian Installer" #. Tag: para -#: install-methods.xml:1576 +#: install-methods.xml:1565 #, no-c-format msgid "" "The Debian Installer supports automating installs via preconfiguration " @@ -2368,7 +2354,7 @@ msgstr "" "ställs under installationsprocessen." #. Tag: para -#: install-methods.xml:1583 +#: install-methods.xml:1572 #, no-c-format msgid "" "Full documentation on preseeding including a working example that you can " @@ -2377,6 +2363,53 @@ msgstr "" "Full dokumentation om förinställning inklusive ett fungerande exempel som du " "kan redigera finns i ." +#~ msgid "" +#~ "To get the TFTP server ready to go, you should first make sure that " +#~ "tftpd is enabled. This is usually enabled by having " +#~ "something like the following line in /etc/inetd.conf: \n" +#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" +#~ " Debian packages will in general set this up " +#~ "correctly by default when they are installed." +#~ msgstr "" +#~ "För att få TFTP-servern klar att köra, bör du först se till att " +#~ "tftpd är aktiverad. Den aktiveras normalt sett genom " +#~ "att ha en rad som liknar följande rad i /etc/inetd.conf: \n" +#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" +#~ " Debian-paketen kommer normalt sett att ställa " +#~ "in det korrekt som standard när de installeras." + +#~ msgid "" +#~ "Look in /etc/inetd.conf and remember the directory " +#~ "which is used as the argument of in.tftpd " +#~ " All in.tftpd alternatives available in Debian " +#~ "should log TFTP requests to the system logs by default. Some of them " +#~ "support a -v argument to increase verbosity. It is " +#~ "recommended to check these log messages in case of boot problems as they " +#~ "are a good starting point for diagnosing the cause of errors. ; you'll need that below. If you've had to change /etc/" +#~ "inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run " +#~ "/etc/init.d/inetd reload; on other machines, find " +#~ "out the process ID for inetd, and run kill -" +#~ "HUP inetd-pid." +#~ msgstr "" +#~ "Leta i filen /etc/inetd.conf och kom ihåg katalogen " +#~ "som används som argument till in.tftpd " +#~ " Alla alternativ till in.tftpd i Debian ska som " +#~ "standard logga TFTP-begäran till systemloggarna. Några av dem har stöd " +#~ "för argumentet -v för att öka informationsnivån. " +#~ "Det rekommenderas att kontrollera dessa loggmeddelanden om " +#~ "uppstartsproblem inträffar eftersom de är en bra startpunkt för att " +#~ "diagnostisera problem. ; du behöver det senare. Om du " +#~ "behövde ändra /etc/inetd.conf, behöver du meddela " +#~ "till den körande inetd-processen att filen har " +#~ "ändrats. På en Debian-maskin, kör /etc/init.d/inetd reload; på andra maskiner, ta reda på vilket process-id som " +#~ "inetd har och kör sedan kill -HUP " +#~ "inetd-pid." + #~ msgid "" #~ "The QNAP Turbo Station (TS-109, TS-209 and TS-409) requires a kernel and " #~ "ramdisk which can be obtained from &qnap-orion-firmware-img;. A script is " diff --git a/po/sv/using-d-i.po b/po/sv/using-d-i.po index 89291ceed..8c90e705e 100644 --- a/po/sv/using-d-i.po +++ b/po/sv/using-d-i.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: installation-guide 20051025 using d-i\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2010-01-18 00:44+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-11-25 17:47+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" @@ -3262,14 +3262,36 @@ msgstr "" "bäst passar din maskinvara. I lägre prioritetslägen kommer du kunna välja " "från en lista av tillgängliga kärnor." +#. Tag: para +#: using-d-i.xml:2004 +#, no-c-format +msgid "" +"When packages are installed using the package management system, it will by " +"default also install packages that are recommended by those packages. " +"Recommended packages are not strictly required for the core functionality of " +"the selected software, but they do enhance that software and should, in the " +"view of the package maintainers, normally be installed together with that " +"software." +msgstr "" + +#. Tag: para +#: using-d-i.xml:2014 +#, no-c-format +msgid "" +"For technical reasons packages installed during the installation of the base " +"system are installed without their Recommends. The rule " +"described above only takes effect after this point in the installation " +"process." +msgstr "" + #. Tag: title -#: using-d-i.xml:2009 +#: using-d-i.xml:2026 #, no-c-format msgid "Setting Up Users And Passwords" msgstr "Skapa användare och lösenord" #. Tag: para -#: using-d-i.xml:2010 +#: using-d-i.xml:2027 #, no-c-format msgid "" "After the base system has been installed, the installer will allow you to " @@ -3282,13 +3304,13 @@ msgstr "" "har färdigställts." #. Tag: title -#: using-d-i.xml:2024 +#: using-d-i.xml:2041 #, no-c-format msgid "Set the Root Password" msgstr "Ställa in ett lösenord för root" #. Tag: para -#: using-d-i.xml:2028 +#: using-d-i.xml:2045 #, no-c-format msgid "" "The root account is also called the super-" @@ -3302,7 +3324,7 @@ msgstr "" "under en så kort tid som möjligt." #. Tag: para -#: using-d-i.xml:2036 +#: using-d-i.xml:2053 #, no-c-format msgid "" "Any password you create should contain at least 6 characters, and should " @@ -3318,7 +3340,7 @@ msgstr "" "information som lätt kan gissas." #. Tag: para -#: using-d-i.xml:2044 +#: using-d-i.xml:2061 #, no-c-format msgid "" "If anyone ever tells you they need your root password, be extremely wary. " @@ -3330,13 +3352,13 @@ msgstr "" "administrerar en maskin med fler än en systemadministratör." #. Tag: title -#: using-d-i.xml:2054 +#: using-d-i.xml:2071 #, no-c-format msgid "Create an Ordinary User" msgstr "Skapa en vanlig användare" #. Tag: para -#: using-d-i.xml:2056 +#: using-d-i.xml:2073 #, no-c-format msgid "" "The system will ask you whether you wish to create an ordinary user account " @@ -3350,7 +3372,7 @@ msgstr "" "dagligt bruk eller som ditt personliga konto." #. Tag: para -#: using-d-i.xml:2065 +#: using-d-i.xml:2082 #, no-c-format msgid "" "Why not? Well, one reason to avoid using root's privileges is that it is " @@ -3371,7 +3393,7 @@ msgstr "" "en sådan bok." #. Tag: para -#: using-d-i.xml:2075 +#: using-d-i.xml:2092 #, no-c-format msgid "" "You will first be prompted for the user's full name. Then you'll be asked " @@ -3386,7 +3408,7 @@ msgstr "" "kontot." #. Tag: para -#: using-d-i.xml:2082 +#: using-d-i.xml:2099 #, no-c-format msgid "" "If at any point after installation you would like to create another account, " @@ -3396,13 +3418,13 @@ msgstr "" "installationen, använd kommandot adduser." #. Tag: title -#: using-d-i.xml:2093 +#: using-d-i.xml:2110 #, no-c-format msgid "Installing Additional Software" msgstr "Installera ytterligare programvara" #. Tag: para -#: using-d-i.xml:2094 +#: using-d-i.xml:2111 #, no-c-format msgid "" "At this point you have a usable but limited system. Most users will want to " @@ -3417,13 +3439,13 @@ msgstr "" "du har en långsam dator eller nätverk." #. Tag: title -#: using-d-i.xml:2109 +#: using-d-i.xml:2126 #, no-c-format msgid "Configuring apt" msgstr "Konfigurera apt" #. Tag: para -#: using-d-i.xml:2111 +#: using-d-i.xml:2128 #, no-c-format msgid "" "One of the tools used to install packages on a &debian; system is a program " @@ -3459,7 +3481,7 @@ msgstr "" "verktyget för pakethantering." #. Tag: para -#: using-d-i.xml:2135 +#: using-d-i.xml:2152 #, no-c-format msgid "" "apt must be configured so that it knows from where to " @@ -3473,7 +3495,7 @@ msgstr "" "den för att passa dina behov efter att installationen är färdig." #. Tag: para -#: using-d-i.xml:2142 +#: using-d-i.xml:2159 #, no-c-format msgid "" "If you are installing at default priority, the installer will largely take " @@ -3492,7 +3514,7 @@ msgstr "" "quote>." #. Tag: para -#: using-d-i.xml:2151 +#: using-d-i.xml:2168 #, no-c-format msgid "" "If you are installing at a lower priority (e.g. in expert mode), you will be " @@ -3508,13 +3530,13 @@ msgstr "" "free i arkivet." #. Tag: title -#: using-d-i.xml:2162 +#: using-d-i.xml:2179 #, no-c-format msgid "Installing from more than one CD or DVD" msgstr "Installera från fler än en cd eller dvd-skiva" #. Tag: para -#: using-d-i.xml:2164 +#: using-d-i.xml:2181 #, no-c-format msgid "" "If you are installing from a CD or a DVD that is part of a larger set, the " @@ -3529,7 +3551,7 @@ msgstr "" "installationsprogrammet kan använda paketen som finns på dem." #. Tag: para -#: using-d-i.xml:2171 +#: using-d-i.xml:2188 #, no-c-format msgid "" "If you do not have any additional CDs or DVDs, that is no problem: using " @@ -3544,7 +3566,7 @@ msgstr "" "i installationen." #. Tag: para -#: using-d-i.xml:2179 +#: using-d-i.xml:2196 #, no-c-format msgid "" "Packages are included on CDs (and DVDs) in the order of their popularity. " @@ -3558,7 +3580,7 @@ msgstr "" "att använda paketen som inkluderats på de sista skivorna i en uppsättning." #. Tag: para -#: using-d-i.xml:2186 +#: using-d-i.xml:2203 #, no-c-format msgid "" "It also means that buying or downloading and burning a full CD set is just a " @@ -3575,7 +3597,7 @@ msgstr "" "de första två skivorna täcker behovet för de flesta." #. Tag: para -#: using-d-i.xml:2195 +#: using-d-i.xml:2212 #, no-c-format msgid "" "A good rule of thumb is that for a regular desktop installation (using the " @@ -3589,7 +3611,7 @@ msgstr "" "skivor. Den första dvd-skivan täcker enkelt in alla tre skrivbordsmiljöer." #. Tag: para -#: using-d-i.xml:2203 +#: using-d-i.xml:2220 #, no-c-format msgid "" "If you do scan multiple CDs or DVDs, the installer will prompt you to " @@ -3607,13 +3629,13 @@ msgstr "" "minska chanserna för misstag." #. Tag: title -#: using-d-i.xml:2216 +#: using-d-i.xml:2233 #, no-c-format msgid "Using a network mirror" msgstr "Använda en nätverksspegel" #. Tag: para -#: using-d-i.xml:2218 +#: using-d-i.xml:2235 #, no-c-format msgid "" "One question that will be asked during most installs is whether or not to " @@ -3625,7 +3647,7 @@ msgstr "" "standardsvaret ett bra svar men det finns några undantag." #. Tag: para -#: using-d-i.xml:2224 +#: using-d-i.xml:2241 #, no-c-format msgid "" "If you are not installing from a full CD or DVD or " @@ -3643,7 +3665,7 @@ msgstr "" "nästa steg av installationen." #. Tag: para -#: using-d-i.xml:2233 +#: using-d-i.xml:2250 #, no-c-format msgid "" "If you are installing from a single full CD or using a full CD image, using " @@ -3664,7 +3686,7 @@ msgstr "" "att du har startat upp det nya systemet)." #. Tag: para -#: using-d-i.xml:2244 +#: using-d-i.xml:2261 #, no-c-format msgid "" "If you are installing from a DVD or using a DVD image, any packages needed " @@ -3678,7 +3700,7 @@ msgstr "" "föregående avsnitt. Användning av en nätverksspegel är valfritt." #. Tag: para -#: using-d-i.xml:2251 +#: using-d-i.xml:2268 #, no-c-format msgid "" "One advantage of adding a network mirror is that updates that have occurred " @@ -3694,7 +3716,7 @@ msgstr "" "säkerheten eller stabiliteten för det installerade systemet." #. Tag: para -#: using-d-i.xml:2258 +#: using-d-i.xml:2275 #, no-c-format msgid "" "In summary: selecting a network mirror is generally a good idea, except if " @@ -3710,19 +3732,19 @@ msgstr "" "spegel beror på" #. Tag: para -#: using-d-i.xml:2267 +#: using-d-i.xml:2284 #, no-c-format msgid "the tasks you select in the next step of the installation," msgstr "funktionera som du väljer i nästa steg av installationen," #. Tag: para -#: using-d-i.xml:2272 +#: using-d-i.xml:2289 #, no-c-format msgid "which packages are needed for those tasks," msgstr "vilka paket som behövs för dessa funktioner," #. Tag: para -#: using-d-i.xml:2277 +#: using-d-i.xml:2294 #, no-c-format msgid "" "which of those packages are present on the CDs or DVDs you have scanned, and" @@ -3731,7 +3753,7 @@ msgstr "" "igenom, samt" #. Tag: para -#: using-d-i.xml:2282 +#: using-d-i.xml:2299 #, no-c-format msgid "" "whether any updated versions of packages included on the CDs or DVDs are " @@ -3743,7 +3765,7 @@ msgstr "" "paketspegel eller en spegelserver för säkerhet eller flyktiga uppdateringar)." #. Tag: para -#: using-d-i.xml:2291 +#: using-d-i.xml:2308 #, no-c-format msgid "" "Note that the last point means that, even if you choose not to use a network " @@ -3757,13 +3779,13 @@ msgstr "" "dessa tjänster har konfigurerats." #. Tag: title -#: using-d-i.xml:2307 +#: using-d-i.xml:2324 #, no-c-format msgid "Selecting and Installing Software" msgstr "Val och installation av programvara" #. Tag: para -#: using-d-i.xml:2309 +#: using-d-i.xml:2326 #, no-c-format msgid "" "During the installation process, you are given the opportunity to select " @@ -3781,7 +3803,7 @@ msgstr "" "din dator att genomföra olika funktioner." #. Tag: para -#: using-d-i.xml:2318 +#: using-d-i.xml:2335 #, no-c-format msgid "" "So, you have the ability to choose tasks first, and " @@ -3815,7 +3837,7 @@ msgstr "" "list\"/> listar utrymmet som krävs för de tillgängliga funktionerna." #. Tag: para -#: using-d-i.xml:2345 +#: using-d-i.xml:2362 #, no-c-format msgid "" "Some tasks may be pre-selected based on the characteristics of the computer " @@ -3827,7 +3849,7 @@ msgstr "" "kan även välja att inte installera några funktioner alls." #. Tag: para -#: using-d-i.xml:2352 +#: using-d-i.xml:2369 #, no-c-format msgid "" "In the standard user interface of the installer, you can use the space bar " @@ -3837,7 +3859,7 @@ msgstr "" "blankslag för att växla markering av en funktion." #. Tag: para -#: using-d-i.xml:2358 +#: using-d-i.xml:2375 #, no-c-format msgid "" "Unless you are using the special KDE or Xfce/LXDE CDs, the Desktop " @@ -3848,7 +3870,7 @@ msgstr "" "GNOME." #. Tag: para -#: using-d-i.xml:2363 +#: using-d-i.xml:2380 #, no-c-format msgid "" "It is not possible to interactively select a different desktop during the " @@ -3870,7 +3892,7 @@ msgstr "" "desktop=xfce eller desktop=lxde." #. Tag: para -#: using-d-i.xml:2374 +#: using-d-i.xml:2391 #, no-c-format msgid "" "Some CD images (businesscard, netinst and DVD) also allow selection of the " @@ -3884,7 +3906,7 @@ msgstr "" "Alternativa skrivbordsmiljöer." #. Tag: para -#: using-d-i.xml:2381 +#: using-d-i.xml:2398 #, no-c-format msgid "" "Note that this will only work if the packages needed for the desired desktop " @@ -3903,7 +3925,7 @@ msgstr "" "annan installationsmetod." #. Tag: para -#: using-d-i.xml:2391 +#: using-d-i.xml:2408 #, no-c-format msgid "" "The various server tasks will install software roughly as follows. DNS " @@ -3923,7 +3945,7 @@ msgstr "" "classname>." #. Tag: para -#: using-d-i.xml:2402 +#: using-d-i.xml:2419 #, no-c-format msgid "" "The Standard system task will install any package that has a " @@ -3939,7 +3961,7 @@ msgstr "" "gör och vill ha ett mycket minimalt system." #. Tag: para -#: using-d-i.xml:2410 +#: using-d-i.xml:2427 #, no-c-format msgid "" "If during language selection a default locale other than the C." #. Tag: title -#: using-d-i.xml:2468 +#: using-d-i.xml:2485 #, no-c-format msgid "Detecting other operating systems" msgstr "Sökning efter andra operativsystem" #. Tag: para -#: using-d-i.xml:2470 +#: using-d-i.xml:2487 #, no-c-format msgid "" "Before a boot loader is installed, the installer will attempt to probe for " @@ -4053,7 +4075,7 @@ msgstr "" "tillägg till Debian." #. Tag: para -#: using-d-i.xml:2478 +#: using-d-i.xml:2495 #, no-c-format msgid "" "Note that multiple operating systems booting on a single machine is still " @@ -4070,13 +4092,13 @@ msgstr "" "information." #. Tag: title -#: using-d-i.xml:2496 +#: using-d-i.xml:2513 #, no-c-format msgid "palo-installer" msgstr "palo-installerare" #. Tag: para -#: using-d-i.xml:2497 +#: using-d-i.xml:2514 #, no-c-format msgid "" "The bootloader on PA-RISC is palo. PALO is " @@ -4092,19 +4114,19 @@ msgstr "" "PALO faktiskt kan läsa Linux-partitioner." #. Tag: para -#: using-d-i.xml:2506 +#: using-d-i.xml:2523 #, no-c-format msgid "hppa FIXME ( need more info )" msgstr "hppa FIXME ( behöver mer info )" #. Tag: title -#: using-d-i.xml:2518 +#: using-d-i.xml:2535 #, no-c-format msgid "Install the Grub Boot Loader on a Hard Disk" msgstr "Installera starthanteraren Grub på en hårddisk" #. Tag: para -#: using-d-i.xml:2520 +#: using-d-i.xml:2537 #, no-c-format msgid "" "The main &architecture; boot loader is called grub. Grub is a " @@ -4116,7 +4138,7 @@ msgstr "" "standardval både för nybörjare och erfarna användare." #. Tag: para -#: using-d-i.xml:2526 +#: using-d-i.xml:2543 #, no-c-format msgid "" "By default, grub will be installed into the Master Boot Record (MBR), where " @@ -4129,7 +4151,7 @@ msgstr "" "information." #. Tag: para -#: using-d-i.xml:2532 +#: using-d-i.xml:2549 #, no-c-format msgid "" "If you do not want to install grub, use the &BTN-GOBACK; button to get to " @@ -4141,13 +4163,13 @@ msgstr "" "använda." #. Tag: title -#: using-d-i.xml:2545 +#: using-d-i.xml:2562 #, no-c-format msgid "Install the LILO Boot Loader on a Hard Disk" msgstr "Installera starthanteraren LILO på en hårddisk" #. Tag: para -#: using-d-i.xml:2547 +#: using-d-i.xml:2564 #, no-c-format msgid "" "The second &architecture; boot loader is called LILO. It is " @@ -4164,7 +4186,7 @@ msgstr "" "HOWTO." #. Tag: para -#: using-d-i.xml:2557 +#: using-d-i.xml:2574 #, no-c-format msgid "" "Currently the LILO installation will only create menu entries for other " @@ -4178,7 +4200,7 @@ msgstr "" "GNU/Linux och GNU/Hurd efter installationen." #. Tag: para -#: using-d-i.xml:2565 +#: using-d-i.xml:2582 #, no-c-format msgid "" "&d-i; offers you three choices on where to install the LILO ska installeras:" #. Tag: term -#: using-d-i.xml:2572 +#: using-d-i.xml:2589 #, no-c-format msgid "Master Boot Record (MBR)" msgstr "Huvudstartsektor (MBR)" #. Tag: para -#: using-d-i.xml:2572 +#: using-d-i.xml:2589 #, no-c-format msgid "" "This way the LILO will take complete control of the boot " @@ -4204,13 +4226,13 @@ msgstr "" "uppstartsprocessen." #. Tag: term -#: using-d-i.xml:2579 +#: using-d-i.xml:2596 #, no-c-format msgid "new Debian partition" msgstr "Ny Debianpartition" #. Tag: para -#: using-d-i.xml:2579 +#: using-d-i.xml:2596 #, no-c-format msgid "" "Choose this if you want to use another boot manager. LILO " @@ -4222,13 +4244,13 @@ msgstr "" "partitionen och kommer att fungera som en sekundär starthanterare." #. Tag: term -#: using-d-i.xml:2588 +#: using-d-i.xml:2605 #, no-c-format msgid "Other choice" msgstr "Annat val" #. Tag: para -#: using-d-i.xml:2588 +#: using-d-i.xml:2605 #, no-c-format msgid "" "Useful for advanced users who want to install LILO " @@ -4242,7 +4264,7 @@ msgstr "" "filename> eller /dev/sda." #. Tag: para -#: using-d-i.xml:2598 +#: using-d-i.xml:2615 #, no-c-format msgid "" "If you can no longer boot into Windows 9x (or DOS) after this step, you'll " @@ -4258,13 +4280,13 @@ msgstr "" "använda något annat sätt att komma tillbaka in i Debian!" #. Tag: title -#: using-d-i.xml:2614 +#: using-d-i.xml:2631 #, no-c-format msgid "Install the ELILO Boot Loader on a Hard Disk" msgstr "Installera starthanteraren ELILO på en hårddisk" #. Tag: para -#: using-d-i.xml:2616 +#: using-d-i.xml:2633 #, no-c-format msgid "" "The &architecture; boot loader is called elilo. It is modeled " @@ -4293,7 +4315,7 @@ msgstr "" "uppstarten av Linux-kärnan." #. Tag: para -#: using-d-i.xml:2632 +#: using-d-i.xml:2649 #, no-c-format msgid "" "The elilo configuration and installation is done as the last " @@ -4311,13 +4333,13 @@ msgstr "" "rotfilsystem." #. Tag: title -#: using-d-i.xml:2644 +#: using-d-i.xml:2661 #, no-c-format msgid "Choose the correct partition!" msgstr "Välj den korrekta partitionen!" #. Tag: para -#: using-d-i.xml:2646 +#: using-d-i.xml:2663 #, no-c-format msgid "" "The criteria for selecting a partition is that it is FAT format filesystem " @@ -4335,13 +4357,13 @@ msgstr "" "partitionen under installationen, vilket raderar allt tidigare innehåll!" #. Tag: title -#: using-d-i.xml:2661 +#: using-d-i.xml:2678 #, no-c-format msgid "EFI Partition Contents" msgstr "EFI-partitionens innehåll" #. Tag: para -#: using-d-i.xml:2663 +#: using-d-i.xml:2680 #, no-c-format msgid "" "The EFI partition is a FAT filesystem format partition on one of the hard " @@ -4371,13 +4393,13 @@ msgstr "" "uppdateras eller konfigureras om." #. Tag: filename -#: using-d-i.xml:2685 +#: using-d-i.xml:2702 #, no-c-format msgid "elilo.conf" msgstr "elilo.conf" #. Tag: para -#: using-d-i.xml:2686 +#: using-d-i.xml:2703 #, no-c-format msgid "" "This is the configuration file read by the boot loader when it starts. It is " @@ -4389,13 +4411,13 @@ msgstr "" "omskrivna för att referera till filer på EFI-partitionen." #. Tag: filename -#: using-d-i.xml:2695 +#: using-d-i.xml:2712 #, no-c-format msgid "elilo.efi" msgstr "elilo.efi" #. Tag: para -#: using-d-i.xml:2696 +#: using-d-i.xml:2713 #, no-c-format msgid "" "This is the boot loader program that the EFI Boot Manager " @@ -4409,13 +4431,13 @@ msgstr "" "Boot Manager." #. Tag: filename -#: using-d-i.xml:2706 +#: using-d-i.xml:2723 #, no-c-format msgid "initrd.img" msgstr "initrd.img" #. Tag: para -#: using-d-i.xml:2707 +#: using-d-i.xml:2724 #, no-c-format msgid "" "This is the initial root filesystem used to boot the kernel. It is a copy of " @@ -4430,13 +4452,13 @@ msgstr "" "initrd.img." #. Tag: filename -#: using-d-i.xml:2719 +#: using-d-i.xml:2736 #, no-c-format msgid "readme.txt" msgstr "readme.txt" #. Tag: para -#: using-d-i.xml:2720 +#: using-d-i.xml:2737 #, no-c-format msgid "" "This is a small text file warning you that the contents of the directory are " @@ -4448,13 +4470,13 @@ msgstr "" "att förloras nästa gång som /usr/sbin/elilo kör." #. Tag: filename -#: using-d-i.xml:2730 +#: using-d-i.xml:2747 #, no-c-format msgid "vmlinuz" msgstr "vmlinuz" #. Tag: para -#: using-d-i.xml:2731 +#: using-d-i.xml:2748 #, no-c-format msgid "" "This is the compressed kernel itself. It is a copy of the file referenced in " @@ -4468,13 +4490,13 @@ msgstr "" "symboliska länken /vmlinuz." #. Tag: title -#: using-d-i.xml:2751 +#: using-d-i.xml:2768 #, no-c-format msgid "arcboot-installer" msgstr "arcboot-installerare" #. Tag: para -#: using-d-i.xml:2752 +#: using-d-i.xml:2769 #, no-c-format msgid "" "The boot loader on SGI machines is arcboot. It has to be " @@ -4518,13 +4540,13 @@ msgstr "" "boot." #. Tag: replaceable -#: using-d-i.xml:2771 +#: using-d-i.xml:2788 #, no-c-format msgid "scsi" msgstr "scsi" #. Tag: para -#: using-d-i.xml:2772 +#: using-d-i.xml:2789 #, no-c-format msgid "" "is the SCSI bus to be booted from, this is 0 for the " @@ -4534,13 +4556,13 @@ msgstr "" "inbyggda styrkort" #. Tag: replaceable -#: using-d-i.xml:2780 +#: using-d-i.xml:2797 #, no-c-format msgid "disk" msgstr "disk" #. Tag: para -#: using-d-i.xml:2781 +#: using-d-i.xml:2798 #, no-c-format msgid "" "is the SCSI ID of the hard disk on which arcboot is " @@ -4549,13 +4571,13 @@ msgstr "" "är SCSI ID på hårddisken på vilken arcboot är installerad" #. Tag: replaceable -#: using-d-i.xml:2789 +#: using-d-i.xml:2806 #, no-c-format msgid "partnr" msgstr "partnr" #. Tag: para -#: using-d-i.xml:2790 +#: using-d-i.xml:2807 #, no-c-format msgid "" "is the number of the partition on which /etc/arcboot.conf/etc/arcboot.conflinux som standard." #. Tag: title -#: using-d-i.xml:2820 +#: using-d-i.xml:2837 #, no-c-format msgid "Install Yaboot on a Hard Disk" msgstr "Installera Yaboot på en hårddisk" #. Tag: para -#: using-d-i.xml:2821 +#: using-d-i.xml:2838 #, no-c-format msgid "" "Newer (mid 1998 and on) PowerMacs use yaboot as their " @@ -4608,13 +4630,13 @@ msgstr "" "&debian;." #. Tag: title -#: using-d-i.xml:2839 +#: using-d-i.xml:2856 #, no-c-format msgid "Install Quik on a Hard Disk" msgstr "Installera Quik på en hårddisk" #. Tag: para -#: using-d-i.xml:2840 +#: using-d-i.xml:2857 #, no-c-format msgid "" "The boot loader for OldWorld Power Macintosh machines is quikzipl-installer" msgstr "zipl-installerare" #. Tag: para -#: using-d-i.xml:2857 +#: using-d-i.xml:2874 #, no-c-format msgid "" "The boot loader on &arch-title; is zipl. ZIPLZIPL." #. Tag: title -#: using-d-i.xml:2874 +#: using-d-i.xml:2891 #, no-c-format msgid "Install the SILO Boot Loader on a Hard Disk" msgstr "Installera starthanteraren SILO på en hårddisk" #. Tag: para -#: using-d-i.xml:2876 +#: using-d-i.xml:2893 #, no-c-format msgid "" "The standard &architecture; boot loader is called silo. It is " @@ -4688,13 +4710,13 @@ msgstr "" "GNU/Linux vid sidan av en befintlig installation av SunOS/Solaris." #. Tag: title -#: using-d-i.xml:2901 +#: using-d-i.xml:2918 #, no-c-format msgid "Continue Without Boot Loader" msgstr "Fortsätt utan starthanterare" #. Tag: para -#: using-d-i.xml:2903 +#: using-d-i.xml:2920 #, no-c-format msgid "" "This option can be used to complete the installation even when no boot " @@ -4707,7 +4729,7 @@ msgstr "" "önskas (exempelvis, du vill använda den befintliga starthanteraren)." #. Tag: para -#: using-d-i.xml:2910 +#: using-d-i.xml:2927 #, no-c-format msgid "" "If you plan to manually configure your bootloader, you should check the name " @@ -4729,13 +4751,13 @@ msgstr "" "partition, även ditt /boot-filsystem." #. Tag: title -#: using-d-i.xml:2927 +#: using-d-i.xml:2944 #, no-c-format msgid "Finishing the Installation" msgstr "Färdigställ installationen" #. Tag: para -#: using-d-i.xml:2928 +#: using-d-i.xml:2945 #, no-c-format msgid "" "This is the last step in the Debian installation process during which the " @@ -4747,13 +4769,13 @@ msgstr "" "mestadels av att knyta ihop allt efter &d-i;." #. Tag: title -#: using-d-i.xml:2941 +#: using-d-i.xml:2958 #, no-c-format msgid "Setting the System Clock" msgstr "Ställa in systemklockan" #. Tag: para -#: using-d-i.xml:2943 +#: using-d-i.xml:2960 #, no-c-format msgid "" "The installer may ask you if the computer's clock is set to UTC. Normally " @@ -4767,7 +4789,7 @@ msgstr "" "baserat på vilka andra operativsystem som är installerade." #. Tag: para -#: using-d-i.xml:2950 +#: using-d-i.xml:2967 #, no-c-format msgid "" "In expert mode you will always be able to choose whether or not the clock is " @@ -4785,7 +4807,7 @@ msgstr "" "dubbel uppstart, välj lokal tid istället för UTC." #. Tag: para -#: using-d-i.xml:2961 +#: using-d-i.xml:2978 #, no-c-format msgid "" "At this point &d-i; will also attempt to save the current time to the " @@ -4797,13 +4819,13 @@ msgstr "" "tid, beroende på det val som tidigare gjordes." #. Tag: title -#: using-d-i.xml:2976 +#: using-d-i.xml:2993 #, no-c-format msgid "Reboot the System" msgstr "Starta om systemet" #. Tag: para -#: using-d-i.xml:2978 +#: using-d-i.xml:2995 #, no-c-format msgid "" "You will be prompted to remove the boot media (CD, floppy, etc) that you " @@ -4815,7 +4837,7 @@ msgstr "" "det kommer systemet att startas om till ditt nya Debian-system." #. Tag: para -#: using-d-i.xml:2984 +#: using-d-i.xml:3001 #, no-c-format msgid "" "After a final prompt the system will be halted because rebooting is not " @@ -4829,13 +4851,13 @@ msgstr "" "stegen av installationen." #. Tag: title -#: using-d-i.xml:2997 +#: using-d-i.xml:3014 #, no-c-format msgid "Miscellaneous" msgstr "Blandat" #. Tag: para -#: using-d-i.xml:2998 +#: using-d-i.xml:3015 #, no-c-format msgid "" "The components listed in this section are usually not involved in the " @@ -4847,13 +4869,13 @@ msgstr "" "om något går fel." #. Tag: title -#: using-d-i.xml:3011 +#: using-d-i.xml:3028 #, no-c-format msgid "Saving the installation logs" msgstr "Spara installationsloggar" #. Tag: para -#: using-d-i.xml:3013 +#: using-d-i.xml:3030 #, no-c-format msgid "" "If the installation is successful, the logfiles created during the " @@ -4865,7 +4887,7 @@ msgstr "" "installer/ på ditt nya Debian-system." #. Tag: para -#: using-d-i.xml:3020 +#: using-d-i.xml:3037 #, no-c-format msgid "" "Choosing Save debug logs from the main menu " @@ -4881,13 +4903,13 @@ msgstr "" "dem i en installationsrapport." #. Tag: title -#: using-d-i.xml:3040 +#: using-d-i.xml:3057 #, no-c-format msgid "Using the Shell and Viewing the Logs" msgstr "Användning av skalet och visning av loggar" #. Tag: para -#: using-d-i.xml:3042 +#: using-d-i.xml:3059 #, no-c-format msgid "" "There are several methods you can use to get a shell while running an " @@ -4915,7 +4937,7 @@ msgstr "" "installationsprogrammet." #. Tag: para -#: using-d-i.xml:3060 +#: using-d-i.xml:3077 #, no-c-format msgid "For the graphical installer see also ." msgstr "" @@ -4923,7 +4945,7 @@ msgstr "" "\"/>." #. Tag: para -#: using-d-i.xml:3064 +#: using-d-i.xml:3081 #, no-c-format msgid "" "If you cannot switch consoles, there is also an Execute a " @@ -4940,7 +4962,7 @@ msgstr "" "installationsprogrammet." #. Tag: para -#: using-d-i.xml:3072 +#: using-d-i.xml:3089 #, no-c-format msgid "" "At this point you are booted from the RAM disk, and there is a limited set " @@ -4958,7 +4980,7 @@ msgstr "" "funktioner som till exempel automatisk komplettering och historik." #. Tag: para -#: using-d-i.xml:3081 +#: using-d-i.xml:3098 #, no-c-format msgid "" "To edit and view files, use the text editor nano. Log " @@ -4970,7 +4992,7 @@ msgstr "" "/var/log." #. Tag: para -#: using-d-i.xml:3088 +#: using-d-i.xml:3105 #, no-c-format msgid "" "Although you can do basically anything in a shell that the available " @@ -4982,7 +5004,7 @@ msgstr "" "egentliga endast där om någonting skulle gå fel och att du behöver felsöka." #. Tag: para -#: using-d-i.xml:3094 +#: using-d-i.xml:3111 #, no-c-format msgid "" "Doing things manually from the shell may interfere with the installation " @@ -4996,13 +5018,13 @@ msgstr "" "det själv från ett skal. " #. Tag: title -#: using-d-i.xml:3109 +#: using-d-i.xml:3126 #, no-c-format msgid "Installation Over the Network" msgstr "Installation över nätverket" #. Tag: para -#: using-d-i.xml:3111 +#: using-d-i.xml:3128 #, no-c-format msgid "" "One of the more interesting components is network-console.)" #. Tag: para -#: using-d-i.xml:3121 +#: using-d-i.xml:3138 #, no-c-format msgid "" "This component is not loaded into the main installation menu by default, so " @@ -5042,7 +5064,7 @@ msgstr "" "installationen genom fjärråtkomst med SSH." #. Tag: para -#: using-d-i.xml:3134 +#: using-d-i.xml:3151 #, no-c-format msgid "" "For installations on &arch-title;, this is the default method after setting " @@ -5052,7 +5074,7 @@ msgstr "" "konfiguration av nätverket." #. Tag: para -#: using-d-i.xml:3139 +#: using-d-i.xml:3156 #, no-c-format msgid "" "After selecting this new entry, you " @@ -5075,7 +5097,7 @@ msgstr "" "fortsätta fjärrinstallationen." #. Tag: para -#: using-d-i.xml:3151 +#: using-d-i.xml:3168 #, no-c-format msgid "" "Should you decide to continue with the installation locally, you can always " @@ -5087,7 +5109,7 @@ msgstr "" "en annan komponent." #. Tag: para -#: using-d-i.xml:3157 +#: using-d-i.xml:3174 #, no-c-format msgid "" "Now let's switch to the other side of the wire. As a prerequisite, you need " @@ -5119,7 +5141,7 @@ msgstr "" "och du behöver bekräfta att det är korrekt." #. Tag: para -#: using-d-i.xml:3174 +#: using-d-i.xml:3191 #, no-c-format msgid "" "The ssh server in the installer uses a default " @@ -5145,7 +5167,7 @@ msgstr "" "anslutningen." #. Tag: para -#: using-d-i.xml:3187 +#: using-d-i.xml:3204 #, no-c-format msgid "" "You may be able to avoid the connection being dropped by adding the option " @@ -5167,7 +5189,7 @@ msgstr "" "själv skulle ha återhämtat sig), så den ska endast användas när den behövs." #. Tag: para -#: using-d-i.xml:3200 +#: using-d-i.xml:3217 #, no-c-format msgid "" "If you install several computers in turn and they happen to have the same IP " @@ -5191,7 +5213,7 @@ msgstr "" ". och försöka igen." #. Tag: para -#: using-d-i.xml:3216 +#: using-d-i.xml:3233 #, no-c-format msgid "" "After the login you will be presented with an initial screen where you have " @@ -5211,7 +5233,7 @@ msgstr "" "SSH-session för installationsmenyn, men kan starta flera sessioner för skal." #. Tag: para -#: using-d-i.xml:3226 +#: using-d-i.xml:3243 #, no-c-format msgid "" "After you have started the installation remotely over SSH, you should not go " @@ -5227,13 +5249,13 @@ msgstr "" "eller problem med det installerade systemet." #. Tag: title -#: using-d-i.xml:3246 +#: using-d-i.xml:3263 #, no-c-format msgid "Loading Missing Firmware" msgstr "Läsa in saknad fast programvara" #. Tag: para -#: using-d-i.xml:3247 +#: using-d-i.xml:3264 #, no-c-format msgid "" "As described in , some devices require " @@ -5249,7 +5271,7 @@ msgstr "" "funktioner." #. Tag: para -#: using-d-i.xml:3255 +#: using-d-i.xml:3272 #, no-c-format msgid "" "If a device driver requests firmware that is not available, &d-i; will " @@ -5268,7 +5290,7 @@ msgstr "" "firmware) och drivrutinsmodulen kommer att läsas om." #. Tag: para -#: using-d-i.xml:3265 +#: using-d-i.xml:3282 #, no-c-format msgid "" "Which devices are scanned and which file systems are supported depends on " @@ -5286,7 +5308,7 @@ msgstr "" "från ett MMC- eller SD-kort." #. Tag: para -#: using-d-i.xml:3275 +#: using-d-i.xml:3292 #, no-c-format msgid "" "Note that it is possible to skip loading the firmware if you know the device " @@ -5298,7 +5320,7 @@ msgstr "" "behövs under installationen." #. Tag: para -#: using-d-i.xml:3282 +#: using-d-i.xml:3299 #, no-c-format msgid "" "Support for loading firmware is still relatively basic and is likely to be " @@ -5316,13 +5338,13 @@ msgstr "" "linkend=\"submit-bug\"/>)." #. Tag: title -#: using-d-i.xml:3293 +#: using-d-i.xml:3310 #, no-c-format msgid "Preparing a medium" msgstr "Förbereda ett media" #. Tag: para -#: using-d-i.xml:3294 +#: using-d-i.xml:3311 #, no-c-format msgid "" "Although in some cases the firmware can also be loaded from a partition on a " @@ -5342,7 +5364,7 @@ msgstr "" "flesta fall stöds under de tidiga stegen av installationen." #. Tag: para -#: using-d-i.xml:3304 +#: using-d-i.xml:3321 #, no-c-format msgid "" "Tarballs containing current packages for the most common firmware are " @@ -5358,7 +5380,7 @@ msgstr "" "på mediats filsystem." #. Tag: para -#: using-d-i.xml:3318 +#: using-d-i.xml:3335 #, no-c-format msgid "" "If the firmware you need is not included in the tarball, you can also " @@ -5374,7 +5396,7 @@ msgstr "" "och kan även innehålla paket som inte innehåller fast programvara:" #. Tag: para -#: using-d-i.xml:3332 +#: using-d-i.xml:3349 #, no-c-format msgid "" "It is also possible to copy individual firmware files to the medium. Loose " @@ -5386,13 +5408,13 @@ msgstr "" "redan installerat system eller från maskinvarans tillverkare." #. Tag: title -#: using-d-i.xml:3341 +#: using-d-i.xml:3358 #, no-c-format msgid "Firmware and the Installed System" msgstr "Fast programvara och det installerade systemet" #. Tag: para -#: using-d-i.xml:3342 +#: using-d-i.xml:3359 #, no-c-format msgid "" "Any firmware loaded during the installation will be copied automatically to " @@ -5411,7 +5433,7 @@ msgstr "" "som användes under installationen." #. Tag: para -#: using-d-i.xml:3351 +#: using-d-i.xml:3368 #, no-c-format msgid "" "If the firmware was loaded from a firmware package, &d-i; will also install " @@ -5428,7 +5450,7 @@ msgstr "" "tillgänglig." #. Tag: para -#: using-d-i.xml:3359 +#: using-d-i.xml:3376 #, no-c-format msgid "" "If loading the firmware was skipped during the installation, the relevant " @@ -5441,7 +5463,7 @@ msgstr "" "manuellt." #. Tag: para -#: using-d-i.xml:3366 +#: using-d-i.xml:3383 #, no-c-format msgid "" "If the firmware was loaded from loose firmware files, the firmware copied to " -- cgit v1.2.3