From da38aa63aad74768018ba991f8091015b37cff41 Mon Sep 17 00:00:00 2001 From: Felipe Augusto van de Wiel Date: Mon, 4 May 2009 00:14:10 +0000 Subject: [SILENT_COMMIT] Update of POT and PO files for the manual --- po/pot/boot-installer.pot | 452 +++++++++++++++++++++++----------------------- po/pot/hardware.pot | 224 ++++++++++++----------- 2 files changed, 341 insertions(+), 335 deletions(-) (limited to 'po/pot') diff --git a/po/pot/boot-installer.pot b/po/pot/boot-installer.pot index e792af08b..9feefad84 100644 --- a/po/pot/boot-installer.pot +++ b/po/pot/boot-installer.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-05-03 00:14+0000\n" +"POT-Creation-Date: 2009-05-04 00:13+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -350,7 +350,7 @@ msgid "As on other architectures, you should install the newest available revisi msgstr "" #. Tag: title -#: boot-installer.xml:301 boot-installer.xml:963 boot-installer.xml:1490 boot-installer.xml:1987 boot-installer.xml:2069 boot-installer.xml:2158 boot-installer.xml:2504 boot-installer.xml:2613 +#: boot-installer.xml:301 boot-installer.xml:963 boot-installer.xml:1490 boot-installer.xml:1987 boot-installer.xml:2069 boot-installer.xml:2158 boot-installer.xml:2503 boot-installer.xml:2612 #, no-c-format msgid "Booting with TFTP" msgstr "" @@ -499,19 +499,19 @@ msgid "Booting from TFTP" msgstr "" #. Tag: para -#: boot-installer.xml:468 boot-installer.xml:969 boot-installer.xml:1508 boot-installer.xml:1993 boot-installer.xml:2510 boot-installer.xml:2619 +#: boot-installer.xml:468 boot-installer.xml:969 boot-installer.xml:1508 boot-installer.xml:1993 boot-installer.xml:2509 boot-installer.xml:2618 #, no-c-format msgid "Booting from the network requires that you have a network connection and a TFTP network boot server (DHCP, RARP, or BOOTP)." msgstr "" #. Tag: para -#: boot-installer.xml:473 boot-installer.xml:974 boot-installer.xml:1513 boot-installer.xml:1998 boot-installer.xml:2515 boot-installer.xml:2624 +#: boot-installer.xml:473 boot-installer.xml:974 boot-installer.xml:1513 boot-installer.xml:1998 boot-installer.xml:2514 boot-installer.xml:2623 #, no-c-format msgid "Older systems such as the 715 might require the use of an RBOOT server instead of a BOOTP server." msgstr "" #. Tag: para -#: boot-installer.xml:478 boot-installer.xml:979 boot-installer.xml:1518 boot-installer.xml:2003 boot-installer.xml:2520 boot-installer.xml:2629 +#: boot-installer.xml:478 boot-installer.xml:979 boot-installer.xml:1518 boot-installer.xml:2003 boot-installer.xml:2519 boot-installer.xml:2628 #, no-c-format msgid "The installation method to support network booting is described in ." msgstr "" @@ -523,25 +523,25 @@ msgid "Booting from CD-ROM" msgstr "" #. Tag: para -#: boot-installer.xml:495 boot-installer.xml:659 boot-installer.xml:1127 boot-installer.xml:1950 boot-installer.xml:2296 boot-installer.xml:2658 +#: boot-installer.xml:495 boot-installer.xml:659 boot-installer.xml:1127 boot-installer.xml:1950 boot-installer.xml:2295 boot-installer.xml:2657 #, no-c-format msgid "The easiest route for most people will be to use a set of Debian CDs. If you have a CD set, and if your machine supports booting directly off the CD, great! Simply configure your system for booting off a CD as described in , insert your CD, reboot, and proceed to the next chapter." msgstr "" #. Tag: para -#: boot-installer.xml:506 boot-installer.xml:670 boot-installer.xml:1138 boot-installer.xml:1961 boot-installer.xml:2307 boot-installer.xml:2669 +#: boot-installer.xml:506 boot-installer.xml:670 boot-installer.xml:1138 boot-installer.xml:1961 boot-installer.xml:2306 boot-installer.xml:2668 #, no-c-format msgid "Note that certain CD drives may require special drivers, and thus be inaccessible in the early installation stages. If it turns out the standard way of booting off a CD doesn't work for your hardware, revisit this chapter and read about alternate kernels and installation methods which may work for you." msgstr "" #. Tag: para -#: boot-installer.xml:514 boot-installer.xml:678 boot-installer.xml:1146 boot-installer.xml:1969 boot-installer.xml:2315 boot-installer.xml:2677 +#: boot-installer.xml:514 boot-installer.xml:678 boot-installer.xml:1146 boot-installer.xml:1969 boot-installer.xml:2314 boot-installer.xml:2676 #, no-c-format msgid "Even if you cannot boot from CD-ROM, you can probably install the Debian system components and any packages you want from CD-ROM. Simply boot using a different media, such as floppies. When it's time to install the operating system, base system, and any additional packages, point the installation system at the CD-ROM drive." msgstr "" #. Tag: para -#: boot-installer.xml:522 boot-installer.xml:686 boot-installer.xml:1154 boot-installer.xml:1977 boot-installer.xml:2323 boot-installer.xml:2685 +#: boot-installer.xml:522 boot-installer.xml:686 boot-installer.xml:1154 boot-installer.xml:1977 boot-installer.xml:2322 boot-installer.xml:2684 #, no-c-format msgid "If you have problems booting, see ." msgstr "" @@ -616,7 +616,7 @@ msgid "There is ." msgstr "" @@ -1303,13 +1303,13 @@ msgid "Booting from a Hard Disk" msgstr "" #. Tag: para -#: boot-installer.xml:1763 boot-installer.xml:2369 +#: boot-installer.xml:1763 boot-installer.xml:2368 #, no-c-format msgid "Booting from an existing operating system is often a convenient option; for some systems it is the only supported method of installation." msgstr "" #. Tag: para -#: boot-installer.xml:1769 boot-installer.xml:2375 +#: boot-installer.xml:1769 boot-installer.xml:2374 #, no-c-format msgid "To boot the installer from hard disk, you will have already completed downloading and placing the needed files in ." msgstr "" @@ -1488,13 +1488,13 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2092 boot-installer.xml:2141 boot-installer.xml:2196 boot-installer.xml:2235 +#: boot-installer.xml:2092 boot-installer.xml:2141 boot-installer.xml:2195 boot-installer.xml:2234 #, no-c-format msgid "Broadcom BCM91250A and BCM91480B TFTP Booting" msgstr "" #. Tag: para -#: boot-installer.xml:2093 boot-installer.xml:2197 +#: boot-installer.xml:2093 boot-installer.xml:2196 #, no-c-format msgid "" "On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot loader via TFTP which will then load and start the Debian installer. In most cases, you will first obtain an IP address via DHCP but it is also possible to configure a static address. In order to use DHCP, you can enter the following command on the CFE prompt: \n" @@ -1505,7 +1505,7 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2116 boot-installer.xml:2220 boot-installer.xml:2823 +#: boot-installer.xml:2116 boot-installer.xml:2219 boot-installer.xml:2822 #, no-c-format msgid "Boot Parameters" msgstr "" @@ -1532,13 +1532,13 @@ msgid "bootp(): append=\"root=/dev/sda1\"" msgstr "" #. Tag: para -#: boot-installer.xml:2142 boot-installer.xml:2236 +#: boot-installer.xml:2142 boot-installer.xml:2235 #, no-c-format msgid "You cannot pass any boot parameters directly from the CFE prompt. Instead, you have to edit the /boot/sibyl.conf file on the TFTP server and add your parameters to the extra_args variable." msgstr "" #. Tag: title -#: boot-installer.xml:2161 boot-installer.xml:2223 +#: boot-installer.xml:2161 boot-installer.xml:2222 #, no-c-format msgid "Cobalt TFTP Booting" msgstr "" @@ -1558,95 +1558,95 @@ msgstr "" #. Tag: para #: boot-installer.xml:2181 #, no-c-format -msgid "Via serial console: Using a null modem cable, you can connect to the serial port of your Cobalt machine (using 115200 bps) and perform the installation this way. This option is not available on Qube 2700 (Qube1) machines since they have no serial port." +msgid "Via serial console: Using a null modem cable, you can connect to the serial port of your Cobalt machine (using 115200 bps) and perform the installation this way." msgstr "" #. Tag: para -#: boot-installer.xml:2224 +#: boot-installer.xml:2223 #, no-c-format msgid "You cannot pass any boot parameters directly. Instead, you have to edit the /nfsroot/default.colo file on the NFS server and add your parameters to the args variable." msgstr "" #. Tag: title -#: boot-installer.xml:2252 +#: boot-installer.xml:2251 #, no-c-format msgid "s390 Limitations" msgstr "" #. Tag: para -#: boot-installer.xml:2253 +#: boot-installer.xml:2252 #, no-c-format msgid "In order to run the installation system a working network setup and ssh session is needed on S/390." msgstr "" #. Tag: para -#: boot-installer.xml:2258 +#: boot-installer.xml:2257 #, no-c-format msgid "The booting process starts with a network setup that prompts you for several network parameters. If the setup is successful, you will login to the system by starting an ssh session which will launch the standard installation system." msgstr "" #. Tag: title -#: boot-installer.xml:2269 +#: boot-installer.xml:2268 #, no-c-format msgid "s390 Boot Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2270 +#: boot-installer.xml:2269 #, no-c-format msgid "On S/390 you can append boot parameters in the parm file. This file can either be in ASCII or EBCDIC format. A sample parm file parmfile.debian is provided with the installation images." msgstr "" #. Tag: para -#: boot-installer.xml:2330 +#: boot-installer.xml:2329 #, no-c-format msgid "Currently, the only &arch-title; subarchitectures that support CD-ROM booting are PReP (though not all systems) and New World PowerMacs. On PowerMacs, hold the c key, or else the combination of Command, Option, Shift, and Delete keys together while booting to boot from the CD-ROM." msgstr "" #. Tag: para -#: boot-installer.xml:2339 +#: boot-installer.xml:2338 #, no-c-format msgid "OldWorld PowerMacs will not boot a Debian CD, because OldWorld computers relied on a Mac OS ROM CD boot driver to be present on the CD, and a free-software version of this driver is not available. All OldWorld systems have floppy drives, so use the floppy drive to launch the installer, and then point the installer to the CD for the needed files." msgstr "" #. Tag: para -#: boot-installer.xml:2348 +#: boot-installer.xml:2347 #, no-c-format msgid "If your system doesn't boot directly from CD-ROM, you can still use the CD-ROM to install the system. On NewWorlds, you can also use an OpenFirmware command to boot from the CD-ROM manually. Follow the instructions in for booting from the hard disk, except use the path to yaboot on the CD at the OF prompt, such as" msgstr "" #. Tag: screen -#: boot-installer.xml:2357 +#: boot-installer.xml:2356 #, no-c-format msgid "0 > boot cd:,\\install\\yaboot" msgstr "" #. Tag: title -#: boot-installer.xml:2363 +#: boot-installer.xml:2362 #, no-c-format msgid "Booting from Hard Disk" msgstr "" #. Tag: title -#: boot-installer.xml:2395 +#: boot-installer.xml:2394 #, no-c-format msgid "Booting OldWorld PowerMacs from MacOS" msgstr "" #. Tag: para -#: boot-installer.xml:2396 +#: boot-installer.xml:2395 #, no-c-format msgid "If you set up BootX in , you can use it to boot into the installation system. Double click the BootX application icon. Click on the Options button and select Use Specified RAM Disk. This will give you the chance to select the ramdisk.image.gz file. You may need to select the No Video Driver checkbox, depending on your hardware. Then click the Linux button to shut down MacOS and launch the installer." msgstr "" #. Tag: title -#: boot-installer.xml:2414 +#: boot-installer.xml:2413 #, no-c-format msgid "Booting NewWorld Macs from OpenFirmware" msgstr "" #. Tag: para -#: boot-installer.xml:2415 +#: boot-installer.xml:2414 #, no-c-format msgid "" "You will have already placed the vmlinux, initrd.gz, yaboot, and yaboot.conf files at the root level of your HFS partition in . You will now have to boot into OpenFirmware (see ). At the prompt, type \n" @@ -1657,31 +1657,31 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2447 +#: boot-installer.xml:2446 #, no-c-format msgid "Booting from USB memory stick" msgstr "" #. Tag: para -#: boot-installer.xml:2448 +#: boot-installer.xml:2447 #, no-c-format msgid "Currently, NewWorld PowerMac systems are known to support USB booting." msgstr "" #. Tag: para -#: boot-installer.xml:2454 +#: boot-installer.xml:2453 #, no-c-format msgid "Make sure you have prepared everything from . To boot a Macintosh system from a USB stick, you will need to use the Open Firmware prompt, since Open Firmware does not search USB storage devices by default. See ." msgstr "" #. Tag: para -#: boot-installer.xml:2463 +#: boot-installer.xml:2462 #, no-c-format msgid "You will need to work out where the USB storage device appears in the device tree, since at the moment ofpath cannot work that out automatically. Type dev / ls and devalias at the Open Firmware prompt to get a list of all known devices and device aliases. On the author's system with various types of USB stick, paths such as usb0/disk, usb0/hub/disk, /pci@f2000000/usb@1b,1/disk@1, and /pci@f2000000/usb@1b,1/hub@1/disk@1 work." msgstr "" #. Tag: para -#: boot-installer.xml:2475 +#: boot-installer.xml:2474 #, no-c-format msgid "" "Having worked out the device path, use a command like this to boot the installer: \n" @@ -1690,25 +1690,25 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2489 +#: boot-installer.xml:2488 #, no-c-format msgid "The system should now boot up, and you should be presented with the boot: prompt. Here you can enter optional boot arguments, or just hit &enterkey;." msgstr "" #. Tag: para -#: boot-installer.xml:2495 +#: boot-installer.xml:2494 #, no-c-format msgid "This boot method is new, and may be difficult to get to work on some NewWorld systems. If you have problems, please file an installation report, as explained in ." msgstr "" #. Tag: para -#: boot-installer.xml:2528 +#: boot-installer.xml:2527 #, no-c-format msgid "Currently, PReP and New World PowerMac systems support netbooting." msgstr "" #. Tag: para -#: boot-installer.xml:2532 +#: boot-installer.xml:2531 #, no-c-format msgid "" "On machines with Open Firmware, such as NewWorld Power Macs, enter the boot monitor (see ) and use the command \n" @@ -1721,163 +1721,163 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2560 +#: boot-installer.xml:2559 #, no-c-format msgid "Booting from floppies is supported for &arch-title;, although it is generally only applicable for OldWorld systems. NewWorld systems are not equipped with floppy drives, and attached USB floppy drives are not supported for booting." msgstr "" #. Tag: para -#: boot-installer.xml:2572 +#: boot-installer.xml:2571 #, no-c-format msgid "To boot from the boot-floppy-hfs.img floppy, place it in floppy drive after shutting the system down, and before pressing the power-on button." msgstr "" #. Tag: para -#: boot-installer.xml:2578 +#: boot-installer.xml:2577 #, no-c-format msgid "For those not familiar with Macintosh floppy operations: a floppy placed in the machine prior to boot will be the first priority for the system to boot from. A floppy without a valid boot system will be ejected, and the machine will then check for bootable hard disk partitions." msgstr "" #. Tag: para -#: boot-installer.xml:2585 +#: boot-installer.xml:2584 #, no-c-format msgid "After booting, the root.bin floppy is requested. Insert the root floppy and press &enterkey;. The installer program is automatically launched after the root system has been loaded into memory." msgstr "" #. Tag: title -#: boot-installer.xml:2596 +#: boot-installer.xml:2595 #, no-c-format msgid "PowerPC Boot Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2597 +#: boot-installer.xml:2596 #, no-c-format msgid "Many older Apple monitors used a 640x480 67Hz mode. If your video appears skewed on an older Apple monitor, try appending the boot argument video=atyfb:vmode:6 , which will select that mode for most Mach64 and Rage video hardware. For Rage 128 hardware, this changes to video=aty128fb:vmode:6 ." msgstr "" #. Tag: para -#: boot-installer.xml:2637 +#: boot-installer.xml:2636 #, no-c-format msgid "On machines with OpenBoot, simply enter the boot monitor on the machine which is being installed (see ). Use the command boot net to boot from a TFTP and RARP server, or try boot net:bootp or boot net:dhcp to boot from a TFTP and BOOTP or DHCP server. You can pass extra boot parameters to &d-i; at the end of the boot command." msgstr "" #. Tag: para -#: boot-installer.xml:2692 +#: boot-installer.xml:2691 #, no-c-format msgid "Most OpenBoot versions support the boot cdrom command which is simply an alias to boot from the SCSI device on ID 6 (or the secondary master for IDE based systems)." msgstr "" #. Tag: title -#: boot-installer.xml:2701 +#: boot-installer.xml:2700 #, no-c-format msgid "IDPROM Messages" msgstr "" #. Tag: para -#: boot-installer.xml:2702 +#: boot-installer.xml:2701 #, no-c-format msgid "If you cannot boot because you get messages about a problem with IDPROM, then it's possible that your NVRAM battery, which holds configuration information for you firmware, has run out. See the Sun NVRAM FAQ for more information." msgstr "" #. Tag: title -#: boot-installer.xml:2721 +#: boot-installer.xml:2720 #, no-c-format msgid "Accessibility" msgstr "" #. Tag: para -#: boot-installer.xml:2722 +#: boot-installer.xml:2721 #, no-c-format msgid "Some users may need specific support because of e.g. some visual impairment. USB braille displays are detected automatically, but most other Most accessibility features have to be enabled manually. On machines that support it, the boot menu emits a beep when it is ready to receive keystrokes. Some boot parameters can then be appended to enable accessibility features. Note that on most architectures the boot loader interprets your keyboard as a QWERTY keyboard." msgstr "" #. Tag: title -#: boot-installer.xml:2739 +#: boot-installer.xml:2738 #, no-c-format msgid "USB Braille Displays" msgstr "" #. Tag: para -#: boot-installer.xml:2740 +#: boot-installer.xml:2739 #, no-c-format msgid "USB braille displays should be automatically detected. A textual version of the installer will then be automatically selected, and support for the braille display will be automatically installed on the target system. You can thus just press &enterkey; at the boot menu. Once brltty is started, you can choose a braille table by entering the preference menu." msgstr "" #. Tag: title -#: boot-installer.xml:2753 +#: boot-installer.xml:2752 #, no-c-format msgid "Serial Braille Displays" msgstr "" #. Tag: para -#: boot-installer.xml:2754 +#: boot-installer.xml:2753 #, no-c-format msgid "Serial braille displays cannot safely be automatically detected (since that may damage some of them). You thus need to append the brltty=driver,port,table boot parameter to tell brltty which driver it should use. driver should be replaced by the two-letter driver code for your terminal (see the driver code list). port should be replaced by the name of the serial port the display is connected to, ttyS0 is the default. table is the name of the braille table to be used (see the table code list); the English table is the default. Note that the table can be changed later by entering the preference menu." msgstr "" #. Tag: title -#: boot-installer.xml:2774 +#: boot-installer.xml:2773 #, no-c-format msgid "Hardware Speech Synthesis" msgstr "" #. Tag: para -#: boot-installer.xml:2775 +#: boot-installer.xml:2774 #, no-c-format msgid "Support for hardware speech synthesis devices is available only alongside support for graphical installer. You thus need to select the Graphical install entry in the boot menu." msgstr "" #. Tag: para -#: boot-installer.xml:2781 +#: boot-installer.xml:2780 #, no-c-format msgid "Hardware speech synthesis devices cannot be automatically detected. You thus need to append the speakup.synth=driver boot parameter to tell speakup which driver it should use. driver should be replaced by the driver code for your device (see driver code list). The textual version of the installer will then be automatically selected, and support for the speech synthesis device will be automatically installed on the target system." msgstr "" #. Tag: title -#: boot-installer.xml:2796 +#: boot-installer.xml:2795 #, no-c-format msgid "Board Devices" msgstr "" #. Tag: para -#: boot-installer.xml:2797 +#: boot-installer.xml:2796 #, no-c-format msgid "Some accessibility devices are actual boards that are plugged inside the machine and that read text directly from the video memory. To get them to work framebuffer support must be disabled by using the fb=false boot parameter. This will however reduce the number of available languages." msgstr "" #. Tag: title -#: boot-installer.xml:2808 +#: boot-installer.xml:2807 #, no-c-format msgid "High-Contrast Theme" msgstr "" #. Tag: para -#: boot-installer.xml:2809 +#: boot-installer.xml:2808 #, no-c-format msgid "For users with low vision, the installer can use a high-contrast theme that makes it more readable. To enable it, append the theme=dark boot parameter." msgstr "" #. Tag: para -#: boot-installer.xml:2824 +#: boot-installer.xml:2823 #, no-c-format msgid "Boot parameters are Linux kernel parameters which are generally used to make sure that peripherals are dealt with properly. For the most part, the kernel can auto-detect information about your peripherals. However, in some cases you'll have to help the kernel a bit." msgstr "" #. Tag: para -#: boot-installer.xml:2831 +#: boot-installer.xml:2830 #, no-c-format msgid "If this is the first time you're booting the system, try the default boot parameters (i.e., don't try setting parameters) and see if it works correctly. It probably will. If not, you can reboot later and look for any special parameters that inform the system about your hardware." msgstr "" #. Tag: para -#: boot-installer.xml:2838 +#: boot-installer.xml:2837 #, no-c-format msgid "Information on many boot parameters can be found in the Linux BootPrompt HOWTO, including tips for obscure hardware. This section contains only a sketch of the most salient parameters. Some common gotchas are included below in ." msgstr "" #. Tag: para -#: boot-installer.xml:2847 +#: boot-installer.xml:2846 #, no-c-format msgid "" "When the kernel boots, a message \n" @@ -1886,511 +1886,511 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2863 +#: boot-installer.xml:2862 #, no-c-format msgid "If you are booting with a serial console, generally the kernel will autodetect this. If you have a videocard (framebuffer) and a keyboard also attached to the computer which you wish to boot via serial console, you may have to pass the console=device argument to the kernel, where device is your serial device, which is usually something like ttyS0 In order to ensure the terminal type used by the installer matches your terminal emulator, the parameter TERM=type can be added. Note that the installer only supports the following terminal types: linux, bterm, ansi, vt102 and dumb. The default for serial console in &d-i; is vt102. ." msgstr "" #. Tag: para -#: boot-installer.xml:2887 +#: boot-installer.xml:2886 #, no-c-format msgid "For &arch-title; the serial devices are ttya or ttyb. Alternatively, set the input-device and output-device OpenPROM variables to ttya." msgstr "" #. Tag: title -#: boot-installer.xml:2898 +#: boot-installer.xml:2897 #, no-c-format msgid "Debian Installer Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2899 +#: boot-installer.xml:2898 #, no-c-format msgid "The installation system recognizes a few additional boot parameters With current kernels (2.6.9 or newer) you can use 32 command line options and 32 environment options. If these numbers are exceeded, the kernel will panic. which may be useful." msgstr "" #. Tag: para -#: boot-installer.xml:2912 +#: boot-installer.xml:2911 #, no-c-format msgid "A number of parameters have a short form that helps avoid the limitations of the kernel command line options and makes entering the parameters easier. If a parameter has a short form, it will be listed in brackets behind the (normal) long form. Examples in this manual will normally use the short form too." msgstr "" #. Tag: term -#: boot-installer.xml:2924 +#: boot-installer.xml:2923 #, no-c-format msgid "debconf/priority (priority)" msgstr "" #. Tag: para -#: boot-installer.xml:2925 +#: boot-installer.xml:2924 #, no-c-format msgid "This parameter sets the lowest priority of messages to be displayed." msgstr "" #. Tag: para -#: boot-installer.xml:2929 +#: boot-installer.xml:2928 #, no-c-format msgid "The default installation uses priority=high. This means that both high and critical priority messages are shown, but medium and low priority messages are skipped. If problems are encountered, the installer adjusts the priority as needed." msgstr "" #. Tag: para -#: boot-installer.xml:2936 +#: boot-installer.xml:2935 #, no-c-format msgid "If you add priority=medium as boot parameter, you will be shown the installation menu and gain more control over the installation. When priority=low is used, all messages are shown (this is equivalent to the expert boot method). With priority=critical, the installation system will display only critical messages and try to do the right thing without fuss." msgstr "" #. Tag: term -#: boot-installer.xml:2950 +#: boot-installer.xml:2949 #, no-c-format msgid "DEBIAN_FRONTEND" msgstr "" #. Tag: para -#: boot-installer.xml:2951 +#: boot-installer.xml:2950 #, no-c-format msgid "This boot parameter controls the type of user interface used for the installer. The current possible parameter settings are: DEBIAN_FRONTEND=noninteractive DEBIAN_FRONTEND=text DEBIAN_FRONTEND=newt DEBIAN_FRONTEND=gtk The default frontend is DEBIAN_FRONTEND=newt. DEBIAN_FRONTEND=text may be preferable for serial console installs. Generally, only the newt frontend is available on default install media. On architectures that support it, the graphical installer uses the gtk frontend." msgstr "" #. Tag: term -#: boot-installer.xml:2980 +#: boot-installer.xml:2979 #, no-c-format msgid "BOOT_DEBUG" msgstr "" #. Tag: para -#: boot-installer.xml:2981 +#: boot-installer.xml:2980 #, no-c-format msgid "Setting this boot parameter to 2 will cause the installer's boot process to be verbosely logged. Setting it to 3 makes debug shells available at strategic points in the boot process. (Exit the shells to continue the boot process.)" msgstr "" #. Tag: userinput -#: boot-installer.xml:2990 +#: boot-installer.xml:2989 #, no-c-format msgid "BOOT_DEBUG=0" msgstr "" #. Tag: para -#: boot-installer.xml:2991 +#: boot-installer.xml:2990 #, no-c-format msgid "This is the default." msgstr "" #. Tag: userinput -#: boot-installer.xml:2995 +#: boot-installer.xml:2994 #, no-c-format msgid "BOOT_DEBUG=1" msgstr "" #. Tag: para -#: boot-installer.xml:2996 +#: boot-installer.xml:2995 #, no-c-format msgid "More verbose than usual." msgstr "" #. Tag: userinput -#: boot-installer.xml:3000 +#: boot-installer.xml:2999 #, no-c-format msgid "BOOT_DEBUG=2" msgstr "" #. Tag: para -#: boot-installer.xml:3001 +#: boot-installer.xml:3000 #, no-c-format msgid "Lots of debugging information." msgstr "" #. Tag: userinput -#: boot-installer.xml:3005 +#: boot-installer.xml:3004 #, no-c-format msgid "BOOT_DEBUG=3" msgstr "" #. Tag: para -#: boot-installer.xml:3006 +#: boot-installer.xml:3005 #, no-c-format msgid "Shells are run at various points in the boot process to allow detailed debugging. Exit the shell to continue the boot." msgstr "" #. Tag: term -#: boot-installer.xml:3020 +#: boot-installer.xml:3019 #, no-c-format msgid "INSTALL_MEDIA_DEV" msgstr "" #. Tag: para -#: boot-installer.xml:3021 +#: boot-installer.xml:3020 #, no-c-format msgid "The value of the parameter is the path to the device to load the Debian installer from. For example, INSTALL_MEDIA_DEV=/dev/floppy/0" msgstr "" #. Tag: para -#: boot-installer.xml:3027 +#: boot-installer.xml:3026 #, no-c-format msgid "The boot floppy, which normally scans all floppies it can to find the root floppy, can be overridden by this parameter to only look at the one device." msgstr "" #. Tag: term -#: boot-installer.xml:3037 +#: boot-installer.xml:3036 #, no-c-format msgid "lowmem" msgstr "" #. Tag: para -#: boot-installer.xml:3038 +#: boot-installer.xml:3037 #, no-c-format msgid "Can be used to force the installer to a lowmem level higher than the one the installer sets by default based on available memory. Possible values are 1 and 2. See also ." msgstr "" #. Tag: term -#: boot-installer.xml:3048 +#: boot-installer.xml:3047 #, no-c-format msgid "noshell" msgstr "" #. Tag: para -#: boot-installer.xml:3049 +#: boot-installer.xml:3048 #, no-c-format msgid "Prevents the installer from offering interactive shells on tty2 and tty3. Useful for unattended installations where physical security is limited." msgstr "" #. Tag: term -#: boot-installer.xml:3058 +#: boot-installer.xml:3057 #, no-c-format msgid "debian-installer/framebuffer (fb)" msgstr "" #. Tag: para -#: boot-installer.xml:3059 +#: boot-installer.xml:3058 #, no-c-format msgid "Some architectures use the kernel framebuffer to offer installation in a number of languages. If framebuffer causes a problem on your system you can disable the feature by the parameter fb=false. Problem symptoms are error messages about bterm or bogl, a blank screen, or a freeze within a few minutes after starting the install." msgstr "" #. Tag: para -#: boot-installer.xml:3068 +#: boot-installer.xml:3067 #, no-c-format msgid "The video=vga16:off argument may also be used to disable the kernel's use of the framebuffer. Such problems have been reported on a Dell Inspiron with Mobile Radeon card." msgstr "" #. Tag: para -#: boot-installer.xml:3074 +#: boot-installer.xml:3073 #, no-c-format msgid "Such problems have been reported on the Amiga 1200 and SE/30." msgstr "" #. Tag: para -#: boot-installer.xml:3078 +#: boot-installer.xml:3077 #, no-c-format msgid "Such problems have been reported on hppa." msgstr "" #. Tag: para -#: boot-installer.xml:3082 +#: boot-installer.xml:3081 #, no-c-format msgid "Because of display problems on some systems, framebuffer support is disabled by default for &arch-title;. This can result in ugly display on systems that do properly support the framebuffer, like those with ATI graphical cards. If you see display problems in the installer, you can try booting with parameter debian-installer/framebuffer=true or fb=true for short." msgstr "" #. Tag: term -#: boot-installer.xml:3096 +#: boot-installer.xml:3095 #, no-c-format msgid "debian-installer/theme (theme)" msgstr "" #. Tag: para -#: boot-installer.xml:3097 +#: boot-installer.xml:3096 #, no-c-format msgid "A theme determines how the user interface of the installer looks (colors, icons, etc.). What themes are available differs per frontend. Currently both the newt and gtk frontends only have a dark theme that was designed for visually impaired users. Set the theme by booting with theme=dark." msgstr "" #. Tag: term -#: boot-installer.xml:3109 boot-installer.xml:3359 +#: boot-installer.xml:3108 boot-installer.xml:3358 #, no-c-format msgid "netcfg/disable_dhcp" msgstr "" #. Tag: para -#: boot-installer.xml:3110 +#: boot-installer.xml:3109 #, no-c-format msgid "By default, the &d-i; automatically probes for network configuration via DHCP. If the probe succeeds, you won't have a chance to review and change the obtained settings. You can get to the manual network setup only in case the DHCP probe fails." msgstr "" #. Tag: para -#: boot-installer.xml:3117 +#: boot-installer.xml:3116 #, no-c-format msgid "If you have a DHCP server on your local network, but want to avoid it because e.g. it gives wrong answers, you can use the parameter netcfg/disable_dhcp=true to prevent configuring the network with DHCP and to enter the information manually." msgstr "" #. Tag: term -#: boot-installer.xml:3128 +#: boot-installer.xml:3127 #, no-c-format msgid "hw-detect/start_pcmcia" msgstr "" #. Tag: para -#: boot-installer.xml:3129 +#: boot-installer.xml:3128 #, no-c-format msgid "Set to false to prevent starting PCMCIA services, if that causes problems. Some laptops are well known for this misbehavior." msgstr "" #. Tag: term -#: boot-installer.xml:3139 +#: boot-installer.xml:3138 #, no-c-format msgid "disk-detect/dmraid/enable (dmraid)" msgstr "" #. Tag: para -#: boot-installer.xml:3140 +#: boot-installer.xml:3139 #, no-c-format msgid "Set to true to enable support for Serial ATA RAID (also called ATA RAID, BIOS RAID or fake RAID) disks in the installer. Note that this support is currently experimental. Additional information can be found on the Debian Installer Wiki." msgstr "" #. Tag: term -#: boot-installer.xml:3151 +#: boot-installer.xml:3150 #, no-c-format msgid "preseed/url (url)" msgstr "" #. Tag: para -#: boot-installer.xml:3152 +#: boot-installer.xml:3151 #, no-c-format msgid "Specify the url to a preconfiguration file to download and use for automating the install. See ." msgstr "" #. Tag: term -#: boot-installer.xml:3161 +#: boot-installer.xml:3160 #, no-c-format msgid "preseed/file (file)" msgstr "" #. Tag: para -#: boot-installer.xml:3162 +#: boot-installer.xml:3161 #, no-c-format msgid "Specify the path to a preconfiguration file to load for automating the install. See ." msgstr "" #. Tag: term -#: boot-installer.xml:3171 +#: boot-installer.xml:3170 #, no-c-format msgid "preseed/interactive" msgstr "" #. Tag: para -#: boot-installer.xml:3172 +#: boot-installer.xml:3171 #, no-c-format msgid "Set to true to display questions even if they have been preseeded. Can be useful for testing or debugging a preconfiguration file. Note that this will have no effect on parameters that are passed as boot parameters, but for those a special syntax can be used. See for details." msgstr "" #. Tag: term -#: boot-installer.xml:3184 +#: boot-installer.xml:3183 #, no-c-format msgid "auto-install/enable (auto)" msgstr "" #. Tag: para -#: boot-installer.xml:3185 +#: boot-installer.xml:3184 #, no-c-format msgid "Delay questions that are normally asked before preseeding is possible until after the network is configured. See for details about using this to automate installs." msgstr "" #. Tag: term -#: boot-installer.xml:3196 +#: boot-installer.xml:3195 #, no-c-format msgid "finish-install/keep-consoles" msgstr "" #. Tag: para -#: boot-installer.xml:3197 +#: boot-installer.xml:3196 #, no-c-format msgid "During installations from serial or management console, the regular virtual consoles (VT1 to VT6) are normally disabled in /etc/inittab. Set to true to prevent this." msgstr "" #. Tag: term -#: boot-installer.xml:3208 +#: boot-installer.xml:3207 #, no-c-format msgid "cdrom-detect/eject" msgstr "" #. Tag: para -#: boot-installer.xml:3209 +#: boot-installer.xml:3208 #, no-c-format msgid "By default, before rebooting, &d-i; automatically ejects the optical media used during the installation. This can be unnecessary if the system does not automatically boot off the CD. In some cases it may even be undesirable, for example if the optical drive cannot reinsert the media itself and the user is not there to do it manually. Many slot loading, slim-line, and caddy style drives cannot reload media automatically." msgstr "" #. Tag: para -#: boot-installer.xml:3218 +#: boot-installer.xml:3217 #, no-c-format msgid "Set to false to disable automatic ejection, and be aware that you may need to ensure that the system does not automatically boot from the optical drive after the initial installation." msgstr "" #. Tag: term -#: boot-installer.xml:3229 +#: boot-installer.xml:3228 #, no-c-format msgid "debian-installer/allow_unauthenticated" msgstr "" #. Tag: para -#: boot-installer.xml:3230 +#: boot-installer.xml:3229 #, no-c-format msgid "By default the installer requires that repositories be authenticated using a known gpg key. Set to true to disable that authentication. Warning: insecure, not recommended." msgstr "" #. Tag: term -#: boot-installer.xml:3241 +#: boot-installer.xml:3240 #, no-c-format msgid "ramdisk_size" msgstr "" #. Tag: para -#: boot-installer.xml:3242 +#: boot-installer.xml:3241 #, no-c-format msgid "This parameter should already be set to a correct value where needed; set it only it you see errors during the boot that indicate the ramdisk could not be loaded completely. The value is in kB." msgstr "" #. Tag: term -#: boot-installer.xml:3252 +#: boot-installer.xml:3251 #, no-c-format msgid "mouse/protocol" msgstr "" #. Tag: para -#: boot-installer.xml:3253 +#: boot-installer.xml:3252 #, no-c-format msgid "For the gtk frontend (graphical installer), users can set the mouse protocol to be used by setting this parameter. Supported values are See the man page for directfbrc 5 for additional information. : PS/2, IMPS/2, MS, MS3, MouseMan and MouseSystems. In most cases the default protocol should work correctly." msgstr "" #. Tag: term -#: boot-installer.xml:3275 +#: boot-installer.xml:3274 #, no-c-format msgid "mouse/device" msgstr "" #. Tag: para -#: boot-installer.xml:3276 +#: boot-installer.xml:3275 #, no-c-format msgid "For the gtk frontend (graphical installer), users can specify the mouse device to be used by setting this parameter. This is mostly useful if the mouse is connected to a serial port (serial mouse). Example: mouse/device=/dev/ttyS1." msgstr "" #. Tag: term -#: boot-installer.xml:3287 +#: boot-installer.xml:3286 #, no-c-format msgid "mouse/left" msgstr "" #. Tag: para -#: boot-installer.xml:3288 +#: boot-installer.xml:3287 #, no-c-format msgid "For the gtk frontend (graphical installer), users can switch the mouse to left-handed operation by setting this parameter to true." msgstr "" #. Tag: term -#: boot-installer.xml:3297 +#: boot-installer.xml:3296 #, no-c-format msgid "directfb/hw-accel" msgstr "" #. Tag: para -#: boot-installer.xml:3298 +#: boot-installer.xml:3297 #, no-c-format msgid "For the gtk frontend (graphical installer), hardware acceleration in directfb is disabled by default. Set this parameter to true to enable it." msgstr "" #. Tag: term -#: boot-installer.xml:3308 +#: boot-installer.xml:3307 #, no-c-format msgid "rescue/enable" msgstr "" #. Tag: para -#: boot-installer.xml:3309 +#: boot-installer.xml:3308 #, no-c-format msgid "Set to true to enter rescue mode rather than performing a normal installation. See ." msgstr "" #. Tag: title -#: boot-installer.xml:3320 +#: boot-installer.xml:3319 #, no-c-format msgid "Using boot parameters to answer questions" msgstr "" #. Tag: para -#: boot-installer.xml:3321 +#: boot-installer.xml:3320 #, no-c-format msgid "With some exceptions, a value can be set at the boot prompt for any question asked during the installation, though this is only really useful in specific cases. General instructions how to do this can be found in . Some specific examples are listed below." msgstr "" #. Tag: term -#: boot-installer.xml:3333 +#: boot-installer.xml:3332 #, no-c-format msgid "debian-installer/locale (locale)" msgstr "" #. Tag: para -#: boot-installer.xml:3334 +#: boot-installer.xml:3333 #, no-c-format msgid "Can be used to set both the language and country for the installation. This will only work if the locale is supported in Debian. For example, use locale=de_CH to select German as language and Switzerland as country." msgstr "" #. Tag: term -#: boot-installer.xml:3345 +#: boot-installer.xml:3344 #, no-c-format msgid "anna/choose_modules (modules)" msgstr "" #. Tag: para -#: boot-installer.xml:3346 +#: boot-installer.xml:3345 #, no-c-format msgid "Can be used to automatically load installer components that are not loaded by default. Examples of optional components that may be useful are openssh-client-udeb (so you can use scp during the installation) and ppp-udeb (see )." msgstr "" #. Tag: para -#: boot-installer.xml:3360 +#: boot-installer.xml:3359 #, no-c-format msgid "Set to true if you want to disable DHCP and instead force static network configuration." msgstr "" #. Tag: term -#: boot-installer.xml:3369 +#: boot-installer.xml:3368 #, no-c-format msgid "mirror/protocol (protocol)" msgstr "" #. Tag: para -#: boot-installer.xml:3370 +#: boot-installer.xml:3369 #, no-c-format msgid "By default the installer will use the http protocol to download files from Debian mirrors and changing that to ftp is not possible during installations at normal priority. By setting this parameter to ftp, you can force the installer to use that protocol instead. Note that you cannot select an ftp mirror from a list, you have to enter the hostname manually." msgstr "" #. Tag: term -#: boot-installer.xml:3383 +#: boot-installer.xml:3382 #, no-c-format msgid "tasksel:tasksel/first (tasks)" msgstr "" #. Tag: para -#: boot-installer.xml:3384 +#: boot-installer.xml:3383 #, no-c-format msgid "Can be used to select tasks that are not available from the interactive task list, such as the kde-desktop task. See for additional information." msgstr "" #. Tag: title -#: boot-installer.xml:3398 +#: boot-installer.xml:3397 #, no-c-format msgid "Passing parameters to kernel modules" msgstr "" #. Tag: para -#: boot-installer.xml:3399 +#: boot-installer.xml:3398 #, no-c-format msgid "If drivers are compiled into the kernel, you can pass parameters to them as described in the kernel documentation. However, if drivers are compiled as modules and because kernel modules are loaded a bit differently during an installation than when booting an installed system, it is not possible to pass parameters to modules as you would normally do. Instead, you need to use a special syntax recognized by the installer which will then make sure that the parameters are saved in the proper configuration files and will thus be used when the modules are actually loaded. The parameters will also be propagated automatically to the configuration for the installed system." msgstr "" #. Tag: para -#: boot-installer.xml:3412 +#: boot-installer.xml:3411 #, no-c-format msgid "Note that it is now quite rare that parameters need to be passed to modules. In most cases the kernel will be able to probe the hardware present in a system and set good defaults that way. However, in some situations it may still be needed to set parameters manually." msgstr "" #. Tag: para -#: boot-installer.xml:3419 +#: boot-installer.xml:3418 #, no-c-format msgid "" "The syntax to use to set parameters for modules is: \n" @@ -2399,133 +2399,133 @@ msgid "" msgstr "" #. Tag: screen -#: boot-installer.xml:3429 +#: boot-installer.xml:3428 #, no-c-format msgid "3c509.xcvr=3 3c509.irq=10" msgstr "" #. Tag: title -#: boot-installer.xml:3435 +#: boot-installer.xml:3434 #, no-c-format msgid "Blacklisting kernel modules" msgstr "" #. Tag: para -#: boot-installer.xml:3436 +#: boot-installer.xml:3435 #, no-c-format msgid "Sometimes it may be necessary to blacklist a module to prevent it from being loaded automatically by the kernel and udev. One reason could be that a particular module causes problems with your hardware. The kernel also sometimes lists two different drivers for the same device. This can cause the device to not work correctly if the drivers conflict or if the wrong driver is loaded first." msgstr "" #. Tag: para -#: boot-installer.xml:3445 +#: boot-installer.xml:3444 #, no-c-format msgid "You can blacklist a module using the following syntax: module_name.blacklist=yes. This will cause the module to be blacklisted in /etc/modprobe.d/blacklist.local both during the installation and for the installed system." msgstr "" #. Tag: para -#: boot-installer.xml:3453 +#: boot-installer.xml:3452 #, no-c-format msgid "Note that a module may still be loaded by the installation system itself. You can prevent that from happening by running the installation in expert mode and unselecting the module from the list of modules displayed during the hardware detection phases." msgstr "" #. Tag: title -#: boot-installer.xml:3470 +#: boot-installer.xml:3469 #, no-c-format msgid "Troubleshooting the Installation Process" msgstr "" #. Tag: title -#: boot-installer.xml:3475 +#: boot-installer.xml:3474 #, no-c-format msgid "CD-ROM Reliability" msgstr "" #. Tag: para -#: boot-installer.xml:3476 +#: boot-installer.xml:3475 #, no-c-format msgid "Sometimes, especially with older CD-ROM drives, the installer may fail to boot from a CD-ROM. The installer may also — even after booting successfully from CD-ROM — fail to recognize the CD-ROM or return errors while reading from it during the installation." msgstr "" #. Tag: para -#: boot-installer.xml:3483 +#: boot-installer.xml:3482 #, no-c-format msgid "There are many different possible causes for these problems. We can only list some common issues and provide general suggestions on how to deal with them. The rest is up to you." msgstr "" #. Tag: para -#: boot-installer.xml:3489 +#: boot-installer.xml:3488 #, no-c-format msgid "There are two very simple things that you should try first." msgstr "" #. Tag: para -#: boot-installer.xml:3494 +#: boot-installer.xml:3493 #, no-c-format msgid "If the CD-ROM does not boot, check that it was inserted correctly and that it is not dirty." msgstr "" #. Tag: para -#: boot-installer.xml:3500 +#: boot-installer.xml:3499 #, no-c-format msgid "If the installer fails to recognize a CD-ROM, try just running the option Detect and mount CD-ROM a second time. Some DMA related issues with older CD-ROM drives are known to be resolved in this way." msgstr "" #. Tag: para -#: boot-installer.xml:3510 +#: boot-installer.xml:3509 #, no-c-format msgid "If this does not work, then try the suggestions in the subsections below. Most, but not all, suggestions discussed there are valid for both CD-ROM and DVD, but we'll use the term CD-ROM for simplicity." msgstr "" #. Tag: para -#: boot-installer.xml:3516 +#: boot-installer.xml:3515 #, no-c-format msgid "If you cannot get the installation working from CD-ROM, try one of the other installation methods that are available." msgstr "" #. Tag: title -#: boot-installer.xml:3524 +#: boot-installer.xml:3523 #, no-c-format msgid "Common issues" msgstr "" #. Tag: para -#: boot-installer.xml:3527 +#: boot-installer.xml:3526 #, no-c-format msgid "Some older CD-ROM drives do not support reading from discs that were burned at high speeds using a modern CD writer." msgstr "" #. Tag: para -#: boot-installer.xml:3533 +#: boot-installer.xml:3532 #, no-c-format msgid "If your system boots correctly from the CD-ROM, it does not necessarily mean that Linux also supports the CD-ROM (or, more correctly, the controller that your CD-ROM drive is connected to)." msgstr "" #. Tag: para -#: boot-installer.xml:3540 +#: boot-installer.xml:3539 #, no-c-format msgid "Some older CD-ROM drives do not work correctly if direct memory access (DMA) is enabled." msgstr "" #. Tag: title -#: boot-installer.xml:3551 +#: boot-installer.xml:3550 #, no-c-format msgid "How to investigate and maybe solve issues" msgstr "" #. Tag: para -#: boot-installer.xml:3552 +#: boot-installer.xml:3551 #, no-c-format msgid "If the CD-ROM fails to boot, try the suggestions listed below." msgstr "" #. Tag: para -#: boot-installer.xml:3557 +#: boot-installer.xml:3556 #, no-c-format msgid "Check that your BIOS actually supports booting from CD-ROM (older systems possibly don't) and that your CD-ROM drive supports the media you are using." msgstr "" #. Tag: para -#: boot-installer.xml:3563 +#: boot-installer.xml:3562 #, no-c-format msgid "" "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from. \n" @@ -2535,7 +2535,7 @@ msgid "" msgstr "" #. Tag: screen -#: boot-installer.xml:3576 +#: boot-installer.xml:3575 #, no-c-format msgid "" "$ dd if=/dev/cdrom | \\\n" @@ -2548,19 +2548,19 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3581 +#: boot-installer.xml:3580 #, no-c-format msgid "If, after the installer has been booted successfully, the CD-ROM is not detected, sometimes simply trying again may solve the problem. If you have more than one CD-ROM drive, try changing the CD-ROM to the other drive. If that does not work or if the CD-ROM is recognized but there are errors when reading from it, try the suggestions listed below. Some basic knowledge of Linux is required for this. To execute any of the commands, you should first switch to the second virtual console (VT2) and activate the shell there." msgstr "" #. Tag: para -#: boot-installer.xml:3593 +#: boot-installer.xml:3592 #, no-c-format msgid "Switch to VT4 or view the contents of /var/log/syslog (use nano as editor) to check for any specific error messages. After that, also check the output of dmesg." msgstr "" #. Tag: para -#: boot-installer.xml:3600 +#: boot-installer.xml:3599 #, no-c-format msgid "" "Check in the output of dmesg if your CD-ROM drive was recognized. You should see something like (the lines do not necessarily have to be consecutive): \n" @@ -2573,13 +2573,13 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3614 +#: boot-installer.xml:3613 #, no-c-format msgid "Check that there is a device node for your CD-ROM drive under /dev/. In the example above, this would be /dev/hdc. There should also be a /dev/cdrom." msgstr "" #. Tag: para -#: boot-installer.xml:3622 +#: boot-installer.xml:3621 #, no-c-format msgid "" "Use the mount command to check if the CD-ROM is already mounted; if not, try mounting it manually: \n" @@ -2588,7 +2588,7 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3632 +#: boot-installer.xml:3631 #, no-c-format msgid "" "Check if DMA is currently enabled: \n" @@ -2601,163 +2601,163 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3647 +#: boot-installer.xml:3646 #, no-c-format msgid "If there are any problems during the installation, try checking the integrity of the CD-ROM using the option near the bottom of the installer's main menu. This option can also be used as a general test if the CD-ROM can be read reliably." msgstr "" #. Tag: title -#: boot-installer.xml:3662 +#: boot-installer.xml:3661 #, no-c-format msgid "Floppy Disk Reliability" msgstr "" #. Tag: para -#: boot-installer.xml:3664 +#: boot-installer.xml:3663 #, no-c-format msgid "The biggest problem for people using floppy disks to install Debian seems to be floppy disk reliability." msgstr "" #. Tag: para -#: boot-installer.xml:3669 +#: boot-installer.xml:3668 #, no-c-format msgid "The boot floppy is the floppy with the worst problems, because it is read by the hardware directly, before Linux boots. Often, the hardware doesn't read as reliably as the Linux floppy disk driver, and may just stop without printing an error message if it reads incorrect data. There can also be failures in the driver floppies, most of which indicate themselves with a flood of messages about disk I/O errors." msgstr "" #. Tag: para -#: boot-installer.xml:3678 +#: boot-installer.xml:3677 #, no-c-format msgid "If you are having the installation stall at a particular floppy, the first thing you should do is write the image to a different floppy and see if that solves the problem. Simply reformatting the old floppy may not be sufficient, even if it appears that the floppy was reformatted and written with no errors. It is sometimes useful to try writing the floppy on a different system." msgstr "" #. Tag: para -#: boot-installer.xml:3687 +#: boot-installer.xml:3686 #, no-c-format msgid "One user reports he had to write the images to floppy three times before one worked, and then everything was fine with the third floppy." msgstr "" #. Tag: para -#: boot-installer.xml:3693 +#: boot-installer.xml:3692 #, no-c-format msgid "Normally you should not have to download a floppy image again, but if you are experiencing problems it is always useful to verify that the images were downloaded correctly by verifying their md5sums." msgstr "" #. Tag: para -#: boot-installer.xml:3699 +#: boot-installer.xml:3698 #, no-c-format msgid "Other users have reported that simply rebooting a few times with the same floppy in the floppy drive can lead to a successful boot. This is all due to buggy hardware or firmware floppy drivers." msgstr "" #. Tag: title -#: boot-installer.xml:3708 +#: boot-installer.xml:3707 #, no-c-format msgid "Boot Configuration" msgstr "" #. Tag: para -#: boot-installer.xml:3710 +#: boot-installer.xml:3709 #, no-c-format msgid "If you have problems and the kernel hangs during the boot process, doesn't recognize peripherals you actually have, or drives are not recognized properly, the first thing to check is the boot parameters, as discussed in ." msgstr "" #. Tag: para -#: boot-installer.xml:3717 +#: boot-installer.xml:3716 #, no-c-format msgid "Often, problems can be solved by removing add-ons and peripherals, and then trying booting again. Internal modems, sound cards, and Plug-n-Play devices can be especially problematic." msgstr "" #. Tag: para -#: boot-installer.xml:3723 +#: boot-installer.xml:3722 #, no-c-format msgid "If you have a large amount of memory installed in your machine, more than 512M, and the installer hangs when booting the kernel, you may need to include a boot argument to limit the amount of memory the kernel sees, such as mem=512m." msgstr "" #. Tag: title -#: boot-installer.xml:3734 boot-installer.xml:3836 +#: boot-installer.xml:3733 boot-installer.xml:3835 #, no-c-format msgid "Common &arch-title; Installation Problems" msgstr "" #. Tag: para -#: boot-installer.xml:3735 +#: boot-installer.xml:3734 #, no-c-format msgid "There are some common installation problems that can be solved or avoided by passing certain boot parameters to the installer." msgstr "" #. Tag: para -#: boot-installer.xml:3740 +#: boot-installer.xml:3739 #, no-c-format msgid "Some systems have floppies with inverted DCLs. If you receive errors reading from the floppy, even when you know the floppy is good, try the parameter floppy=thinkpad." msgstr "" #. Tag: para -#: boot-installer.xml:3746 +#: boot-installer.xml:3745 #, no-c-format msgid "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk drivers), the IDE drive may not be properly recognized. Again, try it first without the parameters and see if the IDE drive is recognized properly. If not, determine your drive geometry (cylinders, heads, and sectors), and use the parameter hd=cylinders,heads,sectors." msgstr "" #. Tag: para -#: boot-installer.xml:3755 +#: boot-installer.xml:3754 #, no-c-format msgid "If you have a very old machine, and the kernel hangs after saying Checking 'hlt' instruction..., then you should try the no-hlt boot argument, which disables this test." msgstr "" #. Tag: para -#: boot-installer.xml:3762 +#: boot-installer.xml:3761 #, no-c-format msgid "Some systems (especially laptops) that have a native resolution that is not a 4:3 ratio (i.e. not for example 800x600 or 1024x768) may have a blank display after the installer has been booted. In that case adding the boot parameter vga=788 The parameter vga=788 will activate the VESA framebuffer with a resolution of 800x600. This will probably work, but may not be the optimal resolution for your system. A list of supported resolutions can be obtained by using vga=ask, but you should be aware that list may not be complete. may help. If that does not work, try adding the boot parameter fb=false." msgstr "" #. Tag: para -#: boot-installer.xml:3780 +#: boot-installer.xml:3779 #, no-c-format msgid "If your screen begins to show a weird picture while the kernel boots, eg. pure white, pure black or colored pixel garbage, your system may contain a problematic video card which does not switch to the framebuffer mode properly. Then you can use the boot parameter fb=false to disable the framebuffer console. Only a reduced set of languages will be available during the installation due to limited console features. See for details." msgstr "" #. Tag: title -#: boot-installer.xml:3794 +#: boot-installer.xml:3793 #, no-c-format msgid "System Freeze During the PCMCIA Configuration Phase" msgstr "" #. Tag: para -#: boot-installer.xml:3795 +#: boot-installer.xml:3794 #, no-c-format msgid "Some laptop models produced by Dell are known to crash when PCMCIA device detection tries to access some hardware addresses. Other laptops may display similar problems. If you experience such a problem and you don't need PCMCIA support during the installation, you can disable PCMCIA using the hw-detect/start_pcmcia=false boot parameter. You can then configure PCMCIA after the installation is completed and exclude the resource range causing the problems." msgstr "" #. Tag: para -#: boot-installer.xml:3805 +#: boot-installer.xml:3804 #, no-c-format msgid "Alternatively, you can boot the installer in expert mode. You will then be asked to enter the resource range options your hardware needs. For example, if you have one of the Dell laptops mentioned above, you should enter exclude port 0x800-0x8ff here. There is also a list of some common resource range options in the System resource settings section of the PCMCIA HOWTO. Note that you have to omit the commas, if any, when you enter this value in the installer." msgstr "" #. Tag: title -#: boot-installer.xml:3822 +#: boot-installer.xml:3821 #, no-c-format msgid "System Freeze while Loading USB Modules" msgstr "" #. Tag: para -#: boot-installer.xml:3823 +#: boot-installer.xml:3822 #, no-c-format msgid "The kernel normally tries to install USB modules and the USB keyboard driver in order to support some non-standard USB keyboards. However, there are some broken USB systems where the driver hangs on loading. A possible workaround may be disabling the USB controller in your mainboard BIOS setup. Another option is passing the nousb parameter at the boot prompt." msgstr "" #. Tag: para -#: boot-installer.xml:3837 +#: boot-installer.xml:3836 #, no-c-format msgid "There are some common installation problems that are worth mentioning." msgstr "" #. Tag: title -#: boot-installer.xml:3843 +#: boot-installer.xml:3842 #, no-c-format msgid "Misdirected video output" msgstr "" #. Tag: para -#: boot-installer.xml:3844 +#: boot-installer.xml:3843 #, no-c-format msgid "" "It is fairly common for &arch-title; to have two video cards in one machine, for example an ATI card and a Sun Creator 3D. In some cases, this may result in the video output getting misdirected soon after the system boots. In typical cases, the display will only show: \n" @@ -2767,85 +2767,85 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3858 +#: boot-installer.xml:3857 #, no-c-format msgid "Note that you may also have to manually add this parameter to the silo configuration (edit /target/etc/silo.conf before rebooting) and, if you installed X11, modify the video driver in /etc/X11/xorg.conf." msgstr "" #. Tag: title -#: boot-installer.xml:3869 +#: boot-installer.xml:3868 #, no-c-format msgid "Failure to Boot or Install from CD-ROM" msgstr "" #. Tag: para -#: boot-installer.xml:3870 +#: boot-installer.xml:3869 #, no-c-format msgid "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if they do boot, there may be inexplicable failures during the installation. Most problems have been reported with SunBlade systems." msgstr "" #. Tag: para -#: boot-installer.xml:3876 +#: boot-installer.xml:3875 #, no-c-format msgid "We recommend to install such systems by netbooting the installer." msgstr "" #. Tag: title -#: boot-installer.xml:3885 +#: boot-installer.xml:3884 #, no-c-format msgid "Interpreting the Kernel Startup Messages" msgstr "" #. Tag: para -#: boot-installer.xml:3887 +#: boot-installer.xml:3886 #, no-c-format msgid "During the boot sequence, you may see many messages in the form can't find something, or something not present, can't initialize something, or even this driver release depends on something. Most of these messages are harmless. You see them because the kernel for the installation system is built to run on computers with many different peripheral devices. Obviously, no one computer will have every possible peripheral device, so the operating system may emit a few complaints while it looks for peripherals you don't own. You may also see the system pause for a while. This happens when it is waiting for a device to respond, and that device is not present on your system. If you find the time it takes to boot the system unacceptably long, you can create a custom kernel later (see )." msgstr "" #. Tag: title -#: boot-installer.xml:3912 +#: boot-installer.xml:3911 #, no-c-format msgid "Reporting Installation Problems" msgstr "" #. Tag: para -#: boot-installer.xml:3913 +#: boot-installer.xml:3912 #, no-c-format msgid "If you get through the initial boot phase but cannot complete the install, the menu option Save debug logs may be helpful. It lets you store system error logs and configuration information from the installer to a floppy, or download them using a web browser. This information may provide clues as to what went wrong and how to fix it. If you are submitting a bug report, you may want to attach this information to the bug report." msgstr "" #. Tag: para -#: boot-installer.xml:3924 +#: boot-installer.xml:3923 #, no-c-format msgid "Other pertinent installation messages may be found in /var/log/ during the installation, and /var/log/installer/ after the computer has been booted into the installed system." msgstr "" #. Tag: title -#: boot-installer.xml:3935 +#: boot-installer.xml:3934 #, no-c-format msgid "Submitting Installation Reports" msgstr "" #. Tag: para -#: boot-installer.xml:3936 +#: boot-installer.xml:3935 #, no-c-format msgid "If you still have problems, please submit an installation report. We also encourage installation reports to be sent even if the installation is successful, so that we can get as much information as possible on the largest number of hardware configurations." msgstr "" #. Tag: para -#: boot-installer.xml:3943 +#: boot-installer.xml:3942 #, no-c-format msgid "Note that your installation report will be published in the Debian Bug Tracking System (BTS) and forwarded to a public mailing list. Make sure that you use an e-mail address that you do not mind being made public." msgstr "" #. Tag: para -#: boot-installer.xml:3949 +#: boot-installer.xml:3948 #, no-c-format msgid "If you have a working Debian system, the easiest way to send an installation report is to install the installation-report and reportbug packages (aptitude install installation-report reportbug), configure reportbug as explained in , and run the command reportbug installation-reports." msgstr "" #. Tag: para -#: boot-installer.xml:3959 +#: boot-installer.xml:3958 #, no-c-format msgid "" "Alternatively you can use this template when filling out installation reports, and file the report as a bug report against the installation-reports pseudo package, by sending it to submit@bugs.debian.org. \n" diff --git a/po/pot/hardware.pot b/po/pot/hardware.pot index 429d7436c..6c97535aa 100644 --- a/po/pot/hardware.pot +++ b/po/pot/hardware.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-05-03 00:14+0000\n" +"POT-Creation-Date: 2009-05-04 00:13+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1817,19 +1817,19 @@ msgstr "" #. Tag: para #: hardware.xml:1055 #, no-c-format -msgid "Debian on &arch-title; supports the following platforms: Cobalt Microserver: only MIPS based Cobalt machines are covered here. This includes the Cobalt Qube 2700 (Qube1), RaQ, Qube2 and RaQ2, and the Gateway Microserver. MIPS Malta: this platform is emulated by QEMU and is therefore a nice way to test and run Debian on MIPS if you don't have the hardware. Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. Complete information regarding supported mips/mipsel machines can be found at the Linux-MIPS homepage. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the debian-&arch-listname; mailing list." +msgid "Debian on &arch-title; supports the following platforms: Cobalt Microserver: only MIPS based Cobalt machines are covered here. This includes the Cobalt RaQ, Qube2 and RaQ2, and the Gateway Microserver. MIPS Malta: this platform is emulated by QEMU and is therefore a nice way to test and run Debian on MIPS if you don't have the hardware. Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. Complete information regarding supported mips/mipsel machines can be found at the Linux-MIPS homepage. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the debian-&arch-listname; mailing list." msgstr "" #. Tag: title -#: hardware.xml:1096 +#: hardware.xml:1095 #, no-c-format msgid "CPU/Machine types" msgstr "" #. Tag: para -#: hardware.xml:1098 +#: hardware.xml:1097 #, no-c-format -msgid "All MIPS based Cobalt machines are supported." +msgid "All MIPS based Cobalt machines are supported with the exception of the Qube 2700 (Qube 1)." msgstr "" #. Tag: para @@ -2501,605 +2501,611 @@ msgstr "" #. Tag: para #: hardware.xml:1772 #, no-c-format -msgid "The X.Org X Window System is only supported on the SGI Indy and the O2. The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A compatibility listing for Broadcom evaluation boards is available." +msgid "The X.Org X Window System is only supported on the SGI Indy and the O2." msgstr "" #. Tag: para -#: hardware.xml:1781 +#: hardware.xml:1777 #, no-c-format msgid "The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A compatibility listing for Broadcom evaluation boards is available." msgstr "" #. Tag: para -#: hardware.xml:1788 +#: hardware.xml:1784 #, no-c-format msgid "Most graphics options commonly found on Sparc-based machines are supported. X.org graphics drivers are available for sunbw2, suncg14, suncg3, suncg6, sunleo and suntcx framebuffers, Creator3D and Elite3D cards (sunffb driver), PGX24/PGX64 ATI-based video cards (ati driver), and PermediaII-based cards (glint driver). To use an Elite3D card with X.org you additionally need to install the afbinit package, and read the documentation included with it on how to activate the card." msgstr "" #. Tag: para -#: hardware.xml:1798 +#: hardware.xml:1794 #, no-c-format msgid "It is not uncommon for a Sparc machine to have two graphics cards in a default configuration. In such a case there is a possibility that the Linux kernel will not direct its output to the card initially used by the firmware. The lack of output on the graphical console may then be mistaken for a hang (usually the last message seen on console is 'Booting Linux...'). One possible solution is to physically remove one of the video cards; another option is to disable one of the cards using a kernel boot parameter. Also, if graphical output is not required or desired, serial console may be used as an alternative. On some systems use of serial console can be activated automatically by disconnecting the keyboard before booting the system." msgstr "" #. Tag: title -#: hardware.xml:1820 +#: hardware.xml:1816 #, no-c-format msgid "Network Connectivity Hardware" msgstr "" #. Tag: para -#: hardware.xml:1821 +#: hardware.xml:1817 #, no-c-format msgid "Almost any network interface card (NIC) supported by the Linux kernel should also be supported by the installation system; modular drivers should normally be loaded automatically. This includes most PCI and PCMCIA cards. Many older ISA cards are supported as well. Again, see for complete details." msgstr "" #. Tag: para -#: hardware.xml:1833 +#: hardware.xml:1829 #, no-c-format msgid "This includes a lot of generic PCI cards (for systems that have PCI) and the following NICs from Sun:" msgstr "" #. Tag: para -#: hardware.xml:1839 +#: hardware.xml:1835 #, no-c-format msgid "Sun LANCE" msgstr "" #. Tag: para -#: hardware.xml:1844 +#: hardware.xml:1840 #, no-c-format msgid "Sun Happy Meal" msgstr "" #. Tag: para -#: hardware.xml:1849 +#: hardware.xml:1845 #, no-c-format msgid "Sun BigMAC" msgstr "" #. Tag: para -#: hardware.xml:1854 +#: hardware.xml:1850 #, no-c-format msgid "Sun QuadEthernet" msgstr "" #. Tag: para -#: hardware.xml:1859 +#: hardware.xml:1855 #, no-c-format msgid "MyriCOM Gigabit Ethernet" msgstr "" #. Tag: para -#: hardware.xml:1866 +#: hardware.xml:1862 #, no-c-format msgid "The list of supported network devices is:" msgstr "" #. Tag: para -#: hardware.xml:1871 +#: hardware.xml:1867 #, no-c-format msgid "Channel to Channel (CTC) and ESCON connection (real or emulated)" msgstr "" #. Tag: para -#: hardware.xml:1876 +#: hardware.xml:1872 #, no-c-format msgid "OSA-2 Token Ring/Ethernet and OSA-Express Fast Ethernet (non-QDIO)" msgstr "" #. Tag: para -#: hardware.xml:1881 +#: hardware.xml:1877 #, no-c-format msgid "OSA-Express in QDIO mode, HiperSockets and Guest-LANs" msgstr "" #. Tag: para -#: hardware.xml:1890 +#: hardware.xml:1886 #, no-c-format msgid "On &arch-title;, most built-in Ethernet devices are supported and modules for additional PCI and USB devices are provided. The major exception is the IXP4xx platform (featuring devices such as the Linksys NSLU2) which needs a proprietary microcode for the operation of its built-in Ethernet device. Unofficial images for Linksys NSLU2 with this proprietary microcode can be obtained from the Slug-Firmware site." msgstr "" #. Tag: para -#: hardware.xml:1900 +#: hardware.xml:1896 #, no-c-format msgid "ISDN is supported, but not during the installation." msgstr "" #. Tag: title -#: hardware.xml:1907 +#: hardware.xml:1903 #, no-c-format msgid "Wireless Network Cards" msgstr "" #. Tag: para -#: hardware.xml:1908 +#: hardware.xml:1904 #, no-c-format msgid "Wireless networking is in general supported as well and a growing number of wireless adapters is supported by the official Linux kernel, although many of them do require firmware to be loaded. Wireless NICs that are not supported by the official Linux kernel can generally be made to work under &debian;, but are not supported during the installation." msgstr "" #. Tag: para -#: hardware.xml:1916 +#: hardware.xml:1912 #, no-c-format msgid "The use of wireless networking during installation is still under development and whether it will work depends on the type of adaptor and the configuration of your wireless access point. If there is no other NIC you can use during the installation, it is still possible to install &debian; using a full CD-ROM or DVD image. Select the option to not configure a network and install using only the packages available from the CD/DVD. You can then install the driver and firmware you need after the installation is completed (after the reboot) and configure your network manually." msgstr "" #. Tag: para -#: hardware.xml:1928 +#: hardware.xml:1924 #, no-c-format msgid "In some cases the driver you need may not be available as a Debian package. You will then have to look if there is source code available in the internet and compile the driver yourself. How to do this is outside the scope of this manual. If no Linux driver is available, your last resort is to use the ndiswrapper package, which allows you to use a Windows driver." msgstr "" #. Tag: title -#: hardware.xml:1942 +#: hardware.xml:1938 #, no-c-format msgid "Known Issues for &arch-title;" msgstr "" #. Tag: para -#: hardware.xml:1943 +#: hardware.xml:1939 #, no-c-format msgid "There are a couple of issues with specific network cards that are worth mentioning here." msgstr "" #. Tag: title -#: hardware.xml:1950 +#: hardware.xml:1946 #, no-c-format msgid "Conflict between tulip and dfme drivers" msgstr "" #. Tag: para -#: hardware.xml:1952 +#: hardware.xml:1948 #, no-c-format msgid "There are various PCI network cards that have the same PCI identification, but are supported by related, but different drivers. Some cards work with the tulip driver, others with the dfme driver. Because they have the same identification, the kernel cannot distinguish between them and it is not certain which driver will be loaded. If this happens to be the wrong one, the NIC may not work, or work badly." msgstr "" #. Tag: para -#: hardware.xml:1962 +#: hardware.xml:1958 #, no-c-format msgid "This is a common problem on Netra systems with a Davicom (DEC-Tulip compatible) NIC. In that case the tulip driver is probably the correct one. You can prevent this issue by blacklisting the wrong driver module as described in ." msgstr "" #. Tag: para -#: hardware.xml:1970 +#: hardware.xml:1966 #, no-c-format msgid "An alternative solution during the installation is to switch to a shell and unload the wrong driver module using modprobe -r module (or both, if they are both loaded). After that you can load the correct module using modprobe module. Note that the wrong module may then still be loaded when the system is rebooted." msgstr "" #. Tag: title -#: hardware.xml:1983 +#: hardware.xml:1979 #, no-c-format msgid "Sun B100 blade" msgstr "" #. Tag: para -#: hardware.xml:1985 +#: hardware.xml:1981 #, no-c-format msgid "The cassini network driver does not work with Sun B100 blade systems." msgstr "" #. Tag: title -#: hardware.xml:2000 +#: hardware.xml:1996 #, no-c-format msgid "Braille Displays" msgstr "" #. Tag: para -#: hardware.xml:2001 +#: hardware.xml:1997 #, no-c-format msgid "Support for braille displays is determined by the underlying support found in brltty. Most displays work under brltty, connected via either a serial port, USB or bluetooth. Details on supported braille devices can be found on the brltty website. &debian; &release; ships with brltty version &brlttyver;." msgstr "" #. Tag: title -#: hardware.xml:2015 +#: hardware.xml:2011 #, no-c-format msgid "Hardware Speech Synthesis" msgstr "" #. Tag: para -#: hardware.xml:2016 +#: hardware.xml:2012 #, no-c-format msgid "Support for hardware speech synthesis devices is determined by the underlying support found in speakup. speakup only supports integrated boards and external devices connected to a serial port (no USB or serial-to-USB adapters are supported). Details on supported hardware speech synthesis devices can be found on the speakup website. &debian; &release; ships with speakup version &speakupver;." msgstr "" #. Tag: title -#: hardware.xml:2036 +#: hardware.xml:2032 #, no-c-format msgid "Peripherals and Other Hardware" msgstr "" #. Tag: para -#: hardware.xml:2037 +#: hardware.xml:2033 #, no-c-format msgid "Linux supports a large variety of hardware devices such as mice, printers, scanners, PCMCIA and USB devices. However, most of these devices are not required while installing the system." msgstr "" #. Tag: para -#: hardware.xml:2043 +#: hardware.xml:2039 #, no-c-format msgid "USB hardware generally works fine, only some USB keyboards may require additional configuration (see )." msgstr "" #. Tag: para -#: hardware.xml:2049 +#: hardware.xml:2045 #, no-c-format msgid "Again, see the Linux Hardware Compatibility HOWTO to determine whether your specific hardware is supported by Linux." msgstr "" #. Tag: para -#: hardware.xml:2055 +#: hardware.xml:2051 #, no-c-format msgid "Package installations from XPRAM and tape are not supported by this system. All packages that you want to install need to be available on a DASD or over the network using NFS, HTTP or FTP." msgstr "" #. Tag: para -#: hardware.xml:2061 +#: hardware.xml:2057 #, no-c-format msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots." msgstr "" #. Tag: para -#: hardware.xml:2067 +#: hardware.xml:2063 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots. The Cobalt RaQ has no support for additional devices but the Qube has one PCI slot." +msgid "The Cobalt RaQ has no support for additional devices but the Qube has one PCI slot." msgstr "" #. Tag: title -#: hardware.xml:2081 +#: hardware.xml:2075 #, no-c-format msgid "Devices Requiring Firmware" msgstr "" #. Tag: para -#: hardware.xml:2082 +#: hardware.xml:2076 #, no-c-format msgid "Besides the availability of a device driver, some hardware also requires so-called firmware or microcode to be loaded into the device before it can become operational. This is most common for network interface cards (especially wireless NICs), but for example some USB devices and even some hard disk controllers also require firmware." msgstr "" #. Tag: para -#: hardware.xml:2090 +#: hardware.xml:2084 #, no-c-format msgid "In most cases firmware is non-free according to the criteria used by the &debian; project and thus cannot be included in the main distribution or in the installation system. If the device driver itself is included in the distribution and if &debian; legally can distribute the firmware, it will often be available as a separate package from the non-free section of the archive." msgstr "" #. Tag: para -#: hardware.xml:2099 +#: hardware.xml:2093 #, no-c-format msgid "However, this does not mean that such hardware cannot be used during an installation. Starting with &debian; 5.0, &d-i; supports loading firmware files or packages containing firmware from a removable medium, such as a floppy disk or USB stick. See for detailed information on how to load firmware files or packages during the installation." msgstr "" #. Tag: title -#: hardware.xml:2115 +#: hardware.xml:2109 #, no-c-format msgid "Purchasing Hardware Specifically for GNU/Linux" msgstr "" #. Tag: para -#: hardware.xml:2117 +#: hardware.xml:2111 #, no-c-format msgid "There are several vendors, who ship systems with Debian or other distributions of GNU/Linux pre-installed. You might pay more for the privilege, but it does buy a level of peace of mind, since you can be sure that the hardware is well-supported by GNU/Linux." msgstr "" #. Tag: para -#: hardware.xml:2125 +#: hardware.xml:2119 #, no-c-format msgid "Unfortunately, it's quite rare to find any vendor shipping new &arch-title; machines at all." msgstr "" #. Tag: para -#: hardware.xml:2130 +#: hardware.xml:2124 #, no-c-format msgid "If you do have to buy a machine with Windows bundled, carefully read the software license that comes with Windows; you may be able to reject the license and obtain a rebate from your vendor. Searching the Internet for windows refund may get you some useful information to help with that." msgstr "" #. Tag: para -#: hardware.xml:2138 +#: hardware.xml:2132 #, no-c-format msgid "Whether or not you are purchasing a system with Linux bundled, or even a used system, it is still important to check that your hardware is supported by the Linux kernel. Check if your hardware is listed in the references found above. Let your salesperson (if any) know that you're shopping for a Linux system. Support Linux-friendly hardware vendors." msgstr "" #. Tag: title -#: hardware.xml:2149 +#: hardware.xml:2143 #, no-c-format msgid "Avoid Proprietary or Closed Hardware" msgstr "" #. Tag: para -#: hardware.xml:2150 +#: hardware.xml:2144 #, no-c-format msgid "Some hardware manufacturers simply won't tell us how to write drivers for their hardware. Others won't allow us access to the documentation without a non-disclosure agreement that would prevent us from releasing the Linux source code." msgstr "" #. Tag: para -#: hardware.xml:2157 +#: hardware.xml:2151 #, no-c-format msgid "Another example is the proprietary hardware in the older Macintosh line. In fact, no specifications or documentation have ever been released for any Macintosh hardware, most notably the ADB controller (used by the mouse and keyboard), the floppy controller, and all acceleration and CLUT manipulation of the video hardware (though we do now support CLUT manipulation on nearly all internal video chips). In a nutshell, this explains why the Macintosh Linux port lags behind other Linux ports." msgstr "" #. Tag: para -#: hardware.xml:2168 +#: hardware.xml:2162 #, no-c-format msgid "Since we haven't been granted access to the documentation on these devices, they simply won't work under Linux. You can help by asking the manufacturers of such hardware to release the documentation. If enough people ask, they will realize that the free software community is an important market." msgstr "" #. Tag: title -#: hardware.xml:2180 +#: hardware.xml:2174 #, no-c-format msgid "Windows-specific Hardware" msgstr "" #. Tag: para -#: hardware.xml:2181 +#: hardware.xml:2175 #, no-c-format msgid "A disturbing trend is the proliferation of Windows-specific modems and printers. In some cases these are specially designed to be operated by the Microsoft Windows operating system and bear the legend WinModem or Made especially for Windows-based computers. This is generally done by removing the embedded processors of the hardware and shifting the work they do over to a Windows driver that is run by your computer's main CPU. This strategy makes the hardware less expensive, but the savings are often not passed on to the user and this hardware may even be more expensive than equivalent devices that retain their embedded intelligence." msgstr "" #. Tag: para -#: hardware.xml:2194 +#: hardware.xml:2188 #, no-c-format msgid "You should avoid Windows-specific hardware for two reasons. The first is that the manufacturers do not generally make the resources available to write a Linux driver. Generally, the hardware and software interface to the device is proprietary, and documentation is not available without a non-disclosure agreement, if it is available at all. This precludes it being used for free software, since free software writers disclose the source code of their programs. The second reason is that when devices like these have had their embedded processors removed, the operating system must perform the work of the embedded processors, often at real-time priority, and thus the CPU is not available to run your programs while it is driving these devices. Since the typical Windows user does not multi-process as intensively as a Linux user, the manufacturers hope that the Windows user simply won't notice the burden this hardware places on their CPU. However, any multi-processing operating system, even Windows 2000 or XP, suffers from degraded performance when peripheral manufacturers skimp on the embedded processing power of their hardware." msgstr "" #. Tag: para -#: hardware.xml:2215 +#: hardware.xml:2209 #, no-c-format msgid "You can help improve this situation by encouraging these manufacturers to release the documentation and other resources necessary for us to program their hardware, but the best strategy is simply to avoid this sort of hardware until it is listed as working in the Linux Hardware Compatibility HOWTO." msgstr "" #. Tag: title -#: hardware.xml:2232 +#: hardware.xml:2226 #, no-c-format msgid "Installation Media" msgstr "" #. Tag: para -#: hardware.xml:2234 +#: hardware.xml:2228 #, no-c-format msgid "This section will help you determine which different media types you can use to install Debian. For example, if you have a floppy disk drive on your machine, it can be used to install Debian. There is a whole chapter devoted to media, , which lists the advantages and disadvantages of each media type. You may want to refer back to this page once you reach that section." msgstr "" #. Tag: title -#: hardware.xml:2245 +#: hardware.xml:2239 #, no-c-format msgid "Floppies" msgstr "" #. Tag: para -#: hardware.xml:2246 +#: hardware.xml:2240 #, no-c-format msgid "In some cases, you'll have to do your first boot from floppy disks. Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch floppy drive." msgstr "" #. Tag: para -#: hardware.xml:2252 +#: hardware.xml:2246 #, no-c-format msgid "For CHRP, floppy support is currently broken." msgstr "" #. Tag: title -#: hardware.xml:2259 +#: hardware.xml:2253 #, no-c-format msgid "CD-ROM/DVD-ROM" msgstr "" #. Tag: para -#: hardware.xml:2261 +#: hardware.xml:2255 #, no-c-format msgid "Whenever you see CD-ROM in this manual, it applies to both CD-ROMs and DVD-ROMs, because both technologies are really the same from the operating system's point of view, except for some very old nonstandard CD-ROM drives which are neither SCSI nor IDE/ATAPI." msgstr "" #. Tag: para -#: hardware.xml:2268 +#: hardware.xml:2262 #, no-c-format msgid "CD-ROM based installation is supported for some architectures. On machines which support bootable CD-ROMs, you should be able to do a completely floppy-less tape-less installation. Even if your system doesn't support booting from a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to install your system, once you've booted up by other means; see ." msgstr "" #. Tag: para -#: hardware.xml:2280 +#: hardware.xml:2274 #, no-c-format msgid "SCSI, SATA and IDE/ATAPI CD-ROMs are supported. The Linux CD-ROM HOWTO contains in-depth information on using CD-ROMs with Linux." msgstr "" #. Tag: para -#: hardware.xml:2286 +#: hardware.xml:2280 #, no-c-format msgid "USB CD-ROM drives are also supported, as are FireWire devices that are supported by the ohci1394 and sbp2 drivers." msgstr "" #. Tag: para -#: hardware.xml:2291 +#: hardware.xml:2285 #, no-c-format msgid "Both SCSI and IDE/ATAPI CD-ROMs are supported on &arch-title;, as long as the controller is supported by the SRM console. This rules out many add-on controller cards, but most integrated IDE and SCSI chips and controller cards that were provided by the manufacturer can be expected to work. To find out whether your device is supported from the SRM console, see the SRM HOWTO." msgstr "" #. Tag: para -#: hardware.xml:2300 +#: hardware.xml:2294 #, no-c-format msgid "IDE/ATAPI CD-ROMs are supported on all ARM machines." msgstr "" #. Tag: para -#: hardware.xml:2304 +#: hardware.xml:2298 +#, no-c-format +msgid "On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position. To start the install, simply choose the System installation entry in the firmware." +msgstr "" + +#. Tag: para +#: hardware.xml:2309 #, no-c-format -msgid "On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position. To start the install, simply choose the System installation entry in the firmware. The Broadcom BCM91250A supports standard IDE devices, including CD-ROM drives, but CD images for this platform are currently not provided because the firmware doesn't recognize CD drives. In order to install Debian on an Broadcom BCM91480B evaluation board, you need an PCI IDE, SATA or SCSI card." +msgid "The Broadcom BCM91250A supports standard IDE devices, including CD-ROM drives, but CD images for this platform are currently not provided because the firmware doesn't recognize CD drives. In order to install Debian on an Broadcom BCM91480B evaluation board, you need an PCI IDE, SATA or SCSI card." msgstr "" #. Tag: title -#: hardware.xml:2322 +#: hardware.xml:2320 #, no-c-format msgid "Hard Disk" msgstr "" #. Tag: para -#: hardware.xml:2324 +#: hardware.xml:2322 #, no-c-format msgid "Booting the installation system directly from a hard disk is another option for many architectures. This will require some other operating system to load the installer onto the hard disk." msgstr "" #. Tag: para -#: hardware.xml:2330 +#: hardware.xml:2328 #, no-c-format msgid "In fact, installation from your local disk is the preferred installation technique for most &architecture; machines." msgstr "" #. Tag: para -#: hardware.xml:2335 +#: hardware.xml:2333 #, no-c-format msgid "Although the &arch-title; does not allow booting from SunOS (Solaris), you can install from a SunOS partition (UFS slices)." msgstr "" #. Tag: title -#: hardware.xml:2343 +#: hardware.xml:2341 #, no-c-format msgid "USB Memory Stick" msgstr "" #. Tag: para -#: hardware.xml:2345 +#: hardware.xml:2343 #, no-c-format msgid "Many Debian boxes need their floppy and/or CD-ROM drives only for setting up the system and for rescue purposes. If you operate some servers, you will probably already have thought about omitting those drives and using an USB memory stick for installing and (when necessary) for recovering the system. This is also useful for small systems which have no room for unnecessary drives." msgstr "" #. Tag: title -#: hardware.xml:2357 +#: hardware.xml:2355 #, no-c-format msgid "Network" msgstr "" #. Tag: para -#: hardware.xml:2359 +#: hardware.xml:2357 #, no-c-format msgid "The network can be used during the installation to retrieve files needed for the installation. Whether the network is used or not depends on the installation method you choose and your answers to certain questions that will be asked during the installation. The installation system supports most types of network connections (including PPPoE, but not ISDN or PPP), via either HTTP or FTP. After the installation is completed, you can also configure your system to use ISDN and PPP." msgstr "" #. Tag: para -#: hardware.xml:2369 +#: hardware.xml:2367 #, no-c-format -msgid "You can also boot the installation system over the network. This is the preferred installation technique for &arch-title;." +msgid "You can also boot the installation system over the network. This is the preferred installation technique for &arch-title;." msgstr "" #. Tag: para -#: hardware.xml:2375 +#: hardware.xml:2373 #, no-c-format msgid "Diskless installation, using network booting from a local area network and NFS-mounting of all local filesystems, is another option." msgstr "" #. Tag: title -#: hardware.xml:2383 +#: hardware.xml:2381 #, no-c-format msgid "Un*x or GNU system" msgstr "" #. Tag: para -#: hardware.xml:2385 +#: hardware.xml:2383 #, no-c-format msgid "If you are running another Unix-like system, you could use it to install &debian; without using the &d-i; described in the rest of this manual. This kind of install may be useful for users with otherwise unsupported hardware or on hosts which can't afford downtime. If you are interested in this technique, skip to the ." msgstr "" #. Tag: title -#: hardware.xml:2397 +#: hardware.xml:2395 #, no-c-format msgid "Supported Storage Systems" msgstr "" #. Tag: para -#: hardware.xml:2399 +#: hardware.xml:2397 #, no-c-format msgid "The Debian boot disks contain a kernel which is built to maximize the number of systems it runs on. Unfortunately, this makes for a larger kernel, which includes many drivers that won't be used for your machine (see to learn how to build your own kernel). Support for the widest possible range of devices is desirable in general, to ensure that Debian can be installed on the widest array of hardware." msgstr "" #. Tag: para -#: hardware.xml:2409 +#: hardware.xml:2407 #, no-c-format msgid "Generally, the Debian installation system includes support for floppies, IDE (also known as PATA) drives, IDE floppies, parallel port IDE devices, SATA and SCSI controllers and drives, USB, and FireWire. The supported file systems include FAT, Win-32 FAT extensions (VFAT) and NTFS." msgstr "" #. Tag: para -#: hardware.xml:2416 +#: hardware.xml:2414 #, no-c-format msgid "Disk interfaces that emulate the AT hard disk interface — often called MFM, RLL, IDE, or PATA — are supported. SATA and SCSI disk controllers from many different manufacturers are supported. See the Linux Hardware Compatibility HOWTO for more details." msgstr "" #. Tag: para -#: hardware.xml:2424 +#: hardware.xml:2422 #, no-c-format msgid "Pretty much all storage systems supported by the Linux kernel are supported by the Debian installation system. Note that the current Linux kernel does not support floppies on the Macintosh at all, and the Debian installation system doesn't support floppies for Amigas. Also supported on the Atari is the Macintosh HFS system, and AFFS as a module. Macs support the Atari (FAT) file system. Amigas support the FAT file system, and HFS as a module." msgstr "" #. Tag: para -#: hardware.xml:2434 +#: hardware.xml:2432 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system. The following SCSI drivers are supported in the default kernel: Sparc ESP PTI Qlogic,ISP Adaptec AIC7xxx NCR and Symbios 53C8XX IDE systems (such as the UltraSPARC 5) are also supported. See Linux for SPARC Processors FAQ for more information on SPARC hardware supported by the Linux kernel." msgstr "" #. Tag: para -#: hardware.xml:2467 +#: hardware.xml:2465 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This includes both SCSI and IDE disks. Note, however, that on many systems, the SRM console is unable to boot from IDE drives, and the Jensen is unable to boot from floppies. (see for more information on booting the Jensen)" msgstr "" #. Tag: para -#: hardware.xml:2476 +#: hardware.xml:2474 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support floppies on CHRP systems at all." msgstr "" #. Tag: para -#: hardware.xml:2482 +#: hardware.xml:2480 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support the floppy drive." msgstr "" #. Tag: para -#: hardware.xml:2488 +#: hardware.xml:2486 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system." msgstr "" #. Tag: para -#: hardware.xml:2493 +#: hardware.xml:2491 #, no-c-format msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This means that FBA and ECKD DASDs are supported with the old Linux disk layout (ldl) and the new common S/390 disk layout (cdl)." msgstr "" #. Tag: title -#: hardware.xml:2510 +#: hardware.xml:2508 #, no-c-format msgid "Memory and Disk Space Requirements" msgstr "" #. Tag: para -#: hardware.xml:2512 +#: hardware.xml:2510 #, no-c-format msgid "You must have at least &minimum-memory; of memory and &minimum-fs-size; of hard disk space to perform a normal installation. Note that these are fairly minimal numbers. For more realistic figures, see ." msgstr "" #. Tag: para -#: hardware.xml:2519 +#: hardware.xml:2517 #, no-c-format msgid "Installation on systems with less memory Installation images that support the graphical installer require more memory than images that support only the textual installer and should not be used on systems with less than &minimum-memory; of memory. If there is a choice between booting the regular and the graphical installer, the former should be selected. or disk space available may be possible but is only advised for experienced users." msgstr "" #. Tag: para -#: hardware.xml:2536 +#: hardware.xml:2534 #, no-c-format msgid "On the Amiga the size of FastRAM is relevant towards the total memory requirements. Also, using Zorro cards with 16-bit RAM is not supported; you'll need 32-bit RAM. The amiboot program can be used to disable 16-bit RAM; see the Linux/m68k FAQ. Recent kernels should disable 16-bit RAM automatically." msgstr "" #. Tag: para -#: hardware.xml:2545 +#: hardware.xml:2543 #, no-c-format msgid "On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux. Many users have reported problems running the kernel itself in Fast RAM, so the Atari bootstrap will place the kernel in ST-RAM. The minimum requirement for ST-RAM is 2 MB. You will need an additional 12 MB or more of TT-RAM." msgstr "" #. Tag: para -#: hardware.xml:2553 +#: hardware.xml:2551 #, no-c-format msgid "On the Macintosh, care should be taken on machines with RAM-based video (RBV). The RAM segment at physical address 0 is used as screen memory, making the default load position for the kernel unavailable. The alternate RAM segment used for kernel and RAMdisk must be at least 4 MB." msgstr "" #. Tag: emphasis -#: hardware.xml:2563 +#: hardware.xml:2561 #, no-c-format msgid "FIXME: is this still true?" msgstr "" -- cgit v1.2.3