From 1b626e6dbfa90c72582e5d4df6672427ad92513c Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Tue, 27 Feb 2007 20:31:51 +0000 Subject: [SILENT_COMMIT] Update of POT and PO files for the manual --- po/pot/boot-installer.pot | 462 ++++++++++++++++++++++----------------------- po/pot/boot-new.pot | 84 ++++----- po/pot/install-methods.pot | 306 +++++++++++++++--------------- 3 files changed, 429 insertions(+), 423 deletions(-) (limited to 'po/pot') diff --git a/po/pot/boot-installer.pot b/po/pot/boot-installer.pot index c7e5570d9..43cda8d76 100644 --- a/po/pot/boot-installer.pot +++ b/po/pot/boot-installer.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2007-02-18 19:51+0000\n" +"POT-Creation-Date: 2007-02-27 20:31+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -344,7 +344,7 @@ msgid "As on other architectures, you should install the newest available revisi msgstr "" #. Tag: title -#: boot-installer.xml:290 boot-installer.xml:1015 boot-installer.xml:1506 boot-installer.xml:2001 boot-installer.xml:2083 boot-installer.xml:2172 boot-installer.xml:2522 boot-installer.xml:2621 +#: boot-installer.xml:290 boot-installer.xml:1015 boot-installer.xml:1506 boot-installer.xml:2003 boot-installer.xml:2085 boot-installer.xml:2174 boot-installer.xml:2524 boot-installer.xml:2623 #, no-c-format msgid "Booting with TFTP" msgstr "" @@ -493,19 +493,19 @@ msgid "Booting from TFTP" msgstr "" #. Tag: para -#: boot-installer.xml:457 boot-installer.xml:1021 boot-installer.xml:1524 boot-installer.xml:2007 boot-installer.xml:2528 boot-installer.xml:2627 +#: boot-installer.xml:457 boot-installer.xml:1021 boot-installer.xml:1524 boot-installer.xml:2009 boot-installer.xml:2530 boot-installer.xml:2629 #, no-c-format msgid "Booting from the network requires that you have a network connection and a TFTP network boot server (DHCP, RARP, or BOOTP)." msgstr "" #. Tag: para -#: boot-installer.xml:462 boot-installer.xml:1026 boot-installer.xml:1529 boot-installer.xml:2012 boot-installer.xml:2533 boot-installer.xml:2632 +#: boot-installer.xml:462 boot-installer.xml:1026 boot-installer.xml:1529 boot-installer.xml:2014 boot-installer.xml:2535 boot-installer.xml:2634 #, no-c-format msgid "Older systems such as the 715 might require the use of an RBOOT server instead of a BOOTP server." msgstr "" #. Tag: para -#: boot-installer.xml:467 boot-installer.xml:1031 boot-installer.xml:1534 boot-installer.xml:2017 boot-installer.xml:2538 boot-installer.xml:2637 +#: boot-installer.xml:467 boot-installer.xml:1031 boot-installer.xml:1534 boot-installer.xml:2019 boot-installer.xml:2540 boot-installer.xml:2639 #, no-c-format msgid "The installation method to support network booting is described in ." msgstr "" @@ -574,25 +574,25 @@ msgid "Booting from CD-ROM" msgstr "" #. Tag: para -#: boot-installer.xml:562 boot-installer.xml:732 boot-installer.xml:1143 boot-installer.xml:1964 boot-installer.xml:2310 boot-installer.xml:2665 +#: boot-installer.xml:562 boot-installer.xml:732 boot-installer.xml:1143 boot-installer.xml:1966 boot-installer.xml:2312 boot-installer.xml:2667 #, no-c-format msgid "The easiest route for most people will be to use a set of Debian CDs. If you have a CD set, and if your machine supports booting directly off the CD, great! Simply configure your system for booting off a CD as described in , insert your CD, reboot, and proceed to the next chapter." msgstr "" #. Tag: para -#: boot-installer.xml:573 boot-installer.xml:743 boot-installer.xml:1154 boot-installer.xml:1975 boot-installer.xml:2321 boot-installer.xml:2676 +#: boot-installer.xml:573 boot-installer.xml:743 boot-installer.xml:1154 boot-installer.xml:1977 boot-installer.xml:2323 boot-installer.xml:2678 #, no-c-format msgid "Note that certain CD drives may require special drivers, and thus be inaccessible in the early installation stages. If it turns out the standard way of booting off a CD doesn't work for your hardware, revisit this chapter and read about alternate kernels and installation methods which may work for you." msgstr "" #. Tag: para -#: boot-installer.xml:581 boot-installer.xml:751 boot-installer.xml:1162 boot-installer.xml:1983 boot-installer.xml:2329 boot-installer.xml:2684 +#: boot-installer.xml:581 boot-installer.xml:751 boot-installer.xml:1162 boot-installer.xml:1985 boot-installer.xml:2331 boot-installer.xml:2686 #, no-c-format msgid "Even if you cannot boot from CD-ROM, you can probably install the Debian system components and any packages you want from CD-ROM. Simply boot using a different media, such as floppies. When it's time to install the operating system, base system, and any additional packages, point the installation system at the CD-ROM drive." msgstr "" #. Tag: para -#: boot-installer.xml:589 boot-installer.xml:759 boot-installer.xml:1170 boot-installer.xml:1991 boot-installer.xml:2337 boot-installer.xml:2692 +#: boot-installer.xml:589 boot-installer.xml:759 boot-installer.xml:1170 boot-installer.xml:1993 boot-installer.xml:2339 boot-installer.xml:2694 #, no-c-format msgid "If you have problems booting, see ." msgstr "" @@ -673,7 +673,7 @@ msgid "There is ." msgstr "" @@ -1291,13 +1291,13 @@ msgid "Booting from a Hard Disk" msgstr "" #. Tag: para -#: boot-installer.xml:1779 boot-installer.xml:2383 +#: boot-installer.xml:1779 boot-installer.xml:2385 #, no-c-format msgid "Booting from an existing operating system is often a convenient option; for some systems it is the only supported method of installation." msgstr "" #. Tag: para -#: boot-installer.xml:1785 boot-installer.xml:2389 +#: boot-installer.xml:1785 boot-installer.xml:2391 #, no-c-format msgid "To boot the installer from hard disk, you will have already completed downloading and placing the needed files in ." msgstr "" @@ -1365,107 +1365,107 @@ msgstr "" #. Tag: para #: boot-installer.xml:1880 #, no-c-format -msgid "Macs require the Penguin bootloader. If you do not have the tools to handle a Stuffit archive, &penguin19.hfs; is an hfs disk image with Penguin unpacked. describes how to copy this image to a floppy." +msgid "Macs require the Penguin bootloader, which can be downloaded from the Linux/mac68k sourceforge.net project. If you do not have the tools to handle a Stuffit archive, you can put it on a MacOS-formatted floppy using a second GNU/Linux machine of any architecture and the hmount, hcopy, and humount tools from the hfsutils suite." msgstr "" #. Tag: para -#: boot-installer.xml:1889 +#: boot-installer.xml:1891 #, no-c-format msgid "At the MacOS desktop, start the Linux installation process by double-clicking on the Penguin Prefs icon in the Penguin directory. The Penguin booter will start up. Go to the Settings item in the File menu, click the Kernel tab. Select the kernel (vmlinuz) and ramdisk (initrd.gz) images in the install directory by clicking on the corresponding buttons in the upper right corner, and navigating the file select dialogs to locate the files." msgstr "" #. Tag: para -#: boot-installer.xml:1904 +#: boot-installer.xml:1906 #, no-c-format msgid "To set the boot parameters in Penguin, choose File -> Settings..., then switch to the Options tab. Boot parameters may be typed in to the text entry area. If you will always want to use these settings, select File -> Save Settings as Default." msgstr "" #. Tag: para -#: boot-installer.xml:1913 +#: boot-installer.xml:1915 #, no-c-format msgid "Close the Settings dialog, save the settings and start the bootstrap using the Boot Now item in the File menu." msgstr "" #. Tag: para -#: boot-installer.xml:1920 +#: boot-installer.xml:1922 #, no-c-format msgid "The Penguin booter will output some debugging information into a window. After this, the screen will go grey, there will be a few seconds' delay. Next, a black screen with white text should come up, displaying all kinds of kernel debugging information. These messages may scroll by too fast for you to read, but that's OK. After a couple of seconds, the installation program should start automatically, so you can continue below at ." msgstr "" #. Tag: title -#: boot-installer.xml:1935 +#: boot-installer.xml:1937 #, no-c-format msgid "Booting from Q40/Q60" msgstr "" #. Tag: para -#: boot-installer.xml:1937 +#: boot-installer.xml:1939 #, no-c-format msgid "FIXME" msgstr "" #. Tag: para -#: boot-installer.xml:1941 +#: boot-installer.xml:1943 #, no-c-format msgid "The installation program should start automatically, so you can continue below at ." msgstr "" #. Tag: para -#: boot-installer.xml:1953 +#: boot-installer.xml:1955 #, no-c-format msgid "Currently, the only &arch-title; subarchitecture that supports CD-ROM booting is the BVME6000." msgstr "" #. Tag: para -#: boot-installer.xml:2025 +#: boot-installer.xml:2027 #, no-c-format msgid "After booting the VMEbus systems you will be presented with the LILO Boot: prompt. At that prompt enter one of the following to boot Linux and begin installation proper of the Debian software using vt102 terminal emulation:" msgstr "" #. Tag: para -#: boot-installer.xml:2036 +#: boot-installer.xml:2038 #, no-c-format msgid "type i6000 &enterkey; to install a BVME4000/6000" msgstr "" #. Tag: para -#: boot-installer.xml:2041 +#: boot-installer.xml:2043 #, no-c-format msgid "type i162 &enterkey; to install an MVME162" msgstr "" #. Tag: para -#: boot-installer.xml:2046 +#: boot-installer.xml:2048 #, no-c-format msgid "type i167 &enterkey; to install an MVME166/167" msgstr "" #. Tag: para -#: boot-installer.xml:2053 +#: boot-installer.xml:2055 #, no-c-format msgid "You may additionally append the string TERM=vt100 to use vt100 terminal emulation, e.g., i6000 TERM=vt100 &enterkey;." msgstr "" #. Tag: para -#: boot-installer.xml:2065 +#: boot-installer.xml:2067 #, no-c-format msgid "For most &arch-title; architectures, booting from a local filesystem is the recommended method." msgstr "" #. Tag: para -#: boot-installer.xml:2070 +#: boot-installer.xml:2072 #, no-c-format msgid "Booting from the boot floppy is supported only for Atari and VME (with a SCSI floppy drive on VME) at this time." msgstr "" #. Tag: title -#: boot-installer.xml:2086 boot-installer.xml:2133 +#: boot-installer.xml:2088 boot-installer.xml:2135 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para -#: boot-installer.xml:2087 +#: boot-installer.xml:2089 #, no-c-format msgid "" "After entering the command monitor use \n" @@ -1476,13 +1476,13 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2106 boot-installer.xml:2155 boot-installer.xml:2210 boot-installer.xml:2249 +#: boot-installer.xml:2108 boot-installer.xml:2157 boot-installer.xml:2212 boot-installer.xml:2251 #, no-c-format msgid "Broadcom BCM91250A and BCM91480B TFTP Booting" msgstr "" #. Tag: para -#: boot-installer.xml:2107 boot-installer.xml:2211 +#: boot-installer.xml:2109 boot-installer.xml:2213 #, no-c-format msgid "" "On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot loader via TFTP which will then load and start the Debian installer. In most cases, you will first obtain an IP address via DHCP but it is also possible to configure a static address. In order to use DHCP, you can enter the following command on the CFE prompt: \n" @@ -1493,19 +1493,19 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2130 boot-installer.xml:2234 boot-installer.xml:2768 +#: boot-installer.xml:2132 boot-installer.xml:2236 boot-installer.xml:2770 #, no-c-format msgid "Boot Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2134 +#: boot-installer.xml:2136 #, no-c-format msgid "On SGI machines you can append boot parameters to the bootp(): command in the command monitor." msgstr "" #. Tag: para -#: boot-installer.xml:2139 +#: boot-installer.xml:2141 #, no-c-format msgid "" "Following the bootp(): command you can give the path and name of the file to boot if you did not give an explicit name via your bootp/dhcp server. Example: \n" @@ -1514,139 +1514,139 @@ msgid "" msgstr "" #. Tag: screen -#: boot-installer.xml:2149 +#: boot-installer.xml:2151 #, no-c-format msgid "bootp(): append=\"root=/dev/sda1\"" msgstr "" #. Tag: para -#: boot-installer.xml:2156 boot-installer.xml:2250 +#: boot-installer.xml:2158 boot-installer.xml:2252 #, no-c-format msgid "You cannot pass any boot parameters directly from the CFE prompt. Instead, you have to edit the /boot/sibyl.conf file on the TFTP server and add your parameters to the extra_args variable." msgstr "" #. Tag: title -#: boot-installer.xml:2175 boot-installer.xml:2237 +#: boot-installer.xml:2177 boot-installer.xml:2239 #, no-c-format msgid "Cobalt TFTP Booting" msgstr "" #. Tag: para -#: boot-installer.xml:2176 +#: boot-installer.xml:2178 #, no-c-format msgid "Strictly speaking, Cobalt does not use TFTP but NFS to boot. You need to install an NFS server and put the installer files in /nfsroot. When you boot your Cobalt, you have to press the left and the right cursor buttons at the same time and the machine will boot via the network from NFS. It will then display several options on the display. There are the following two installation methods:" msgstr "" #. Tag: para -#: boot-installer.xml:2186 +#: boot-installer.xml:2188 #, no-c-format msgid "Via SSH (default): In this case, the installer will configure the network via DHCP and start an SSH server. It will then display a random password and other login information (such as the IP address) on the Cobalt LCD. When you connect to the machine with an SSH client you can start with the installation." msgstr "" #. Tag: para -#: boot-installer.xml:2195 +#: boot-installer.xml:2197 #, no-c-format msgid "Via serial console: Using a null modem cable, you can connect to the serial port of your Cobalt machine (using 115200 bps) and perform the installation this way. This option is not available on Qube 2700 (Qube1) machines since they have no serial port." msgstr "" #. Tag: para -#: boot-installer.xml:2238 +#: boot-installer.xml:2240 #, no-c-format msgid "You cannot pass any boot parameters directly. Instead, you have to edit the /nfsroot/default.colo file on the NFS server and add your parameters to the args variable." msgstr "" #. Tag: title -#: boot-installer.xml:2266 +#: boot-installer.xml:2268 #, no-c-format msgid "s390 Limitations" msgstr "" #. Tag: para -#: boot-installer.xml:2267 +#: boot-installer.xml:2269 #, no-c-format msgid "In order to run the installation system a working network setup and ssh session is needed on S/390." msgstr "" #. Tag: para -#: boot-installer.xml:2272 +#: boot-installer.xml:2274 #, no-c-format msgid "The booting process starts with a network setup that prompts you for several network parameters. If the setup is successful, you will login to the system by starting an ssh session which will launch the standard installation system." msgstr "" #. Tag: title -#: boot-installer.xml:2283 +#: boot-installer.xml:2285 #, no-c-format msgid "s390 Boot Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2284 +#: boot-installer.xml:2286 #, no-c-format msgid "On S/390 you can append boot parameters in the parm file. This file can either be in ASCII or EBCDIC format. A sample parm file parmfile.debian is provided with the installation images." msgstr "" #. Tag: para -#: boot-installer.xml:2344 +#: boot-installer.xml:2346 #, no-c-format msgid "Currently, the only &arch-title; subarchitectures that support CD-ROM booting are PReP (though not all systems) and New World PowerMacs. On PowerMacs, hold the c key, or else the combination of Command, Option, Shift, and Delete keys together while booting to boot from the CD-ROM." msgstr "" #. Tag: para -#: boot-installer.xml:2353 +#: boot-installer.xml:2355 #, no-c-format msgid "OldWorld PowerMacs will not boot a Debian CD, because OldWorld computers relied on a Mac OS ROM CD boot driver to be present on the CD, and a free-software version of this driver is not available. All OldWorld systems have floppy drives, so use the floppy drive to launch the installer, and then point the installer to the CD for the needed files." msgstr "" #. Tag: para -#: boot-installer.xml:2362 +#: boot-installer.xml:2364 #, no-c-format msgid "If your system doesn't boot directly from CD-ROM, you can still use the CD-ROM to install the system. On NewWorlds, you can also use an OpenFirmware command to boot from the CD-ROM manually. Follow the instructions in for booting from the hard disk, except use the path to yaboot on the CD at the OF prompt, such as" msgstr "" #. Tag: screen -#: boot-installer.xml:2371 +#: boot-installer.xml:2373 #, no-c-format msgid "0 > boot cd:,\\install\\yaboot" msgstr "" #. Tag: title -#: boot-installer.xml:2377 +#: boot-installer.xml:2379 #, no-c-format msgid "Booting from Hard Disk" msgstr "" #. Tag: title -#: boot-installer.xml:2398 +#: boot-installer.xml:2400 #, no-c-format msgid "Booting CHRP from OpenFirmware" msgstr "" #. Tag: emphasis -#: boot-installer.xml:2402 +#: boot-installer.xml:2404 #, no-c-format msgid "Not yet written." msgstr "" #. Tag: title -#: boot-installer.xml:2407 +#: boot-installer.xml:2409 #, no-c-format msgid "Booting OldWorld PowerMacs from MacOS" msgstr "" #. Tag: para -#: boot-installer.xml:2408 +#: boot-installer.xml:2410 #, no-c-format msgid "If you set up BootX in , you can use it to boot into the installation system. Double click the BootX application icon. Click on the Options button and select Use Specified RAM Disk. This will give you the chance to select the ramdisk.image.gz file. You may need to select the No Video Driver checkbox, depending on your hardware. Then click the Linux button to shut down MacOS and launch the installer." msgstr "" #. Tag: title -#: boot-installer.xml:2426 +#: boot-installer.xml:2428 #, no-c-format msgid "Booting NewWorld Macs from OpenFirmware" msgstr "" #. Tag: para -#: boot-installer.xml:2427 +#: boot-installer.xml:2429 #, no-c-format msgid "" "You will have already placed the vmlinux, initrd.gz, yaboot, and yaboot.conf files at the root level of your HFS partition in . Restart the computer, and immediately (during the chime) hold down the Option, Command (cloverleaf/Apple), o, and f keys all together. After a few seconds you will be presented with the Open Firmware prompt. At the prompt, type \n" @@ -1657,31 +1657,31 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2462 +#: boot-installer.xml:2464 #, no-c-format msgid "Booting from USB memory stick" msgstr "" #. Tag: para -#: boot-installer.xml:2463 +#: boot-installer.xml:2465 #, no-c-format msgid "Currently, NewWorld PowerMac systems are known to support USB booting." msgstr "" #. Tag: para -#: boot-installer.xml:2469 +#: boot-installer.xml:2471 #, no-c-format msgid "Make sure you have prepared everything from . To boot a Macintosh system from a USB stick, you will need to use the Open Firmware prompt, since Open Firmware does not search USB storage devices by default. To get to the prompt, hold down Command Option o f all together while booting (see )." msgstr "" #. Tag: para -#: boot-installer.xml:2481 +#: boot-installer.xml:2483 #, no-c-format msgid "You will need to work out where the USB storage device appears in the device tree, since at the moment ofpath cannot work that out automatically. Type dev / ls and devalias at the Open Firmware prompt to get a list of all known devices and device aliases. On the author's system with various types of USB stick, paths such as usb0/disk, usb0/hub/disk, /pci@f2000000/usb@1b,1/disk@1, and /pci@f2000000/usb@1b,1/hub@1/disk@1 work." msgstr "" #. Tag: para -#: boot-installer.xml:2493 +#: boot-installer.xml:2495 #, no-c-format msgid "" "Having worked out the device path, use a command like this to boot the installer: \n" @@ -1690,85 +1690,85 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2507 +#: boot-installer.xml:2509 #, no-c-format msgid "The system should now boot up, and you should be presented with the boot: prompt. Here you can enter optional boot arguments, or just hit &enterkey;." msgstr "" #. Tag: para -#: boot-installer.xml:2513 +#: boot-installer.xml:2515 #, no-c-format msgid "This boot method is new, and may be difficult to get to work on some NewWorld systems. If you have problems, please file an installation report, as explained in ." msgstr "" #. Tag: para -#: boot-installer.xml:2546 +#: boot-installer.xml:2548 #, no-c-format msgid "Currently, PReP and New World PowerMac systems support netbooting." msgstr "" #. Tag: para -#: boot-installer.xml:2550 +#: boot-installer.xml:2552 #, no-c-format msgid "On machines with Open Firmware, such as NewWorld Power Macs, enter the boot monitor (see ) and use the command boot enet:0. PReP and CHRP boxes may have different ways of addressing the network. On a PReP machine, you should try boot net:server_ipaddr,file,client_ipaddr. On some PReP systems (e.g. Motorola PowerStack machines) the command help boot may give a description of syntax and available options." msgstr "" #. Tag: para -#: boot-installer.xml:2568 +#: boot-installer.xml:2570 #, no-c-format msgid "Booting from floppies is supported for &arch-title;, although it is generally only applicable for OldWorld systems. NewWorld systems are not equipped with floppy drives, and attached USB floppy drives are not supported for booting." msgstr "" #. Tag: para -#: boot-installer.xml:2580 +#: boot-installer.xml:2582 #, no-c-format msgid "To boot from the boot-floppy-hfs.img floppy, place it in floppy drive after shutting the system down, and before pressing the power-on button." msgstr "" #. Tag: para -#: boot-installer.xml:2586 +#: boot-installer.xml:2588 #, no-c-format msgid "For those not familiar with Macintosh floppy operations: a floppy placed in the machine prior to boot will be the first priority for the system to boot from. A floppy without a valid boot system will be ejected, and the machine will then check for bootable hard disk partitions." msgstr "" #. Tag: para -#: boot-installer.xml:2593 +#: boot-installer.xml:2595 #, no-c-format msgid "After booting, the root.bin floppy is requested. Insert the root floppy and press &enterkey;. The installer program is automatically launched after the root system has been loaded into memory." msgstr "" #. Tag: title -#: boot-installer.xml:2604 +#: boot-installer.xml:2606 #, no-c-format msgid "PowerPC Boot Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2605 +#: boot-installer.xml:2607 #, no-c-format msgid "Many older Apple monitors used a 640x480 67Hz mode. If your video appears skewed on an older Apple monitor, try appending the boot argument video=atyfb:vmode:6 , which will select that mode for most Mach64 and Rage video hardware. For Rage 128 hardware, this changes to video=aty128fb:vmode:6 ." msgstr "" #. Tag: para -#: boot-installer.xml:2645 +#: boot-installer.xml:2647 #, no-c-format msgid "On machines with OpenBoot, simply enter the boot monitor on the machine which is being installed (see ). Use the command boot net to boot from a TFTP and RARP server, or try boot net:bootp or boot net:dhcp to boot from a TFTP and BOOTP or DHCP server." msgstr "" #. Tag: para -#: boot-installer.xml:2699 +#: boot-installer.xml:2701 #, no-c-format msgid "Most OpenBoot versions support the boot cdrom command which is simply an alias to boot from the SCSI device on ID 6 (or the secondary master for IDE based systems)." msgstr "" #. Tag: para -#: boot-installer.xml:2711 +#: boot-installer.xml:2713 #, no-c-format msgid "Floppy images are currently only available for sparc32, but, for technical reasons, not for official releases. (The reason is that they can only be built as root, which is not supported by our build daemons.) Look under daily built images on the Debian Installer project website for links to floppy images for sparc32." msgstr "" #. Tag: para -#: boot-installer.xml:2720 +#: boot-installer.xml:2722 #, no-c-format msgid "" "To boot from floppy on a Sparc, use \n" @@ -1777,13 +1777,13 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2730 +#: boot-installer.xml:2732 #, no-c-format msgid "Several Sparcs (e.g. Ultra 10) have an OBP bug that prevents them from booting (instead of not supporting booting at all). The appropriate OBP update can be downloaded as product ID 106121 from ." msgstr "" #. Tag: para -#: boot-installer.xml:2737 +#: boot-installer.xml:2739 #, no-c-format msgid "" "If you are booting from the floppy, and you see messages such as \n" @@ -1793,37 +1793,37 @@ msgid "" msgstr "" #. Tag: title -#: boot-installer.xml:2749 +#: boot-installer.xml:2751 #, no-c-format msgid "IDPROM Messages" msgstr "" #. Tag: para -#: boot-installer.xml:2750 +#: boot-installer.xml:2752 #, no-c-format msgid "If you cannot boot because you get messages about a problem with IDPROM, then it's possible that your NVRAM battery, which holds configuration information for you firmware, has run out. See the Sun NVRAM FAQ for more information." msgstr "" #. Tag: para -#: boot-installer.xml:2769 +#: boot-installer.xml:2771 #, no-c-format msgid "Boot parameters are Linux kernel parameters which are generally used to make sure that peripherals are dealt with properly. For the most part, the kernel can auto-detect information about your peripherals. However, in some cases you'll have to help the kernel a bit." msgstr "" #. Tag: para -#: boot-installer.xml:2776 +#: boot-installer.xml:2778 #, no-c-format msgid "If this is the first time you're booting the system, try the default boot parameters (i.e., don't try setting parameters) and see if it works correctly. It probably will. If not, you can reboot later and look for any special parameters that inform the system about your hardware." msgstr "" #. Tag: para -#: boot-installer.xml:2783 +#: boot-installer.xml:2785 #, no-c-format msgid "Information on many boot parameters can be found in the Linux BootPrompt HOWTO, including tips for obscure hardware. This section contains only a sketch of the most salient parameters. Some common gotchas are included below in ." msgstr "" #. Tag: para -#: boot-installer.xml:2792 +#: boot-installer.xml:2794 #, no-c-format msgid "" "When the kernel boots, a message \n" @@ -1832,451 +1832,451 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2808 +#: boot-installer.xml:2810 #, no-c-format msgid "If you are booting with a serial console, generally the kernel will autodetect this (although not on DECstations). If you have a videocard (framebuffer) and a keyboard also attached to the computer which you wish to boot via serial console, you may have to pass the console=device argument to the kernel, where device is your serial device, which is usually something like ttyS0." msgstr "" #. Tag: para -#: boot-installer.xml:2821 +#: boot-installer.xml:2823 #, no-c-format msgid "For &arch-title; the serial devices are ttya or ttyb. Alternatively, set the input-device and output-device OpenPROM variables to ttya." msgstr "" #. Tag: title -#: boot-installer.xml:2832 +#: boot-installer.xml:2834 #, no-c-format msgid "Debian Installer Parameters" msgstr "" #. Tag: para -#: boot-installer.xml:2833 +#: boot-installer.xml:2835 #, no-c-format msgid "The installation system recognizes a few additional boot parameters With current kernels (2.6.9 or newer) you can use 32 command line options and 32 environment options. If these numbers are exceeded, the kernel will panic. which may be useful." msgstr "" #. Tag: para -#: boot-installer.xml:2846 +#: boot-installer.xml:2848 #, no-c-format msgid "A number of parameters have a short form that helps avoid the limitations of the kernel command line options and makes entering the parameters easier. If a parameter has a short form, it will be listed in brackets behind the (normal) long form. Examples in this manual will normally use the short form too." msgstr "" #. Tag: term -#: boot-installer.xml:2858 +#: boot-installer.xml:2860 #, no-c-format msgid "debconf/priority (priority)" msgstr "" #. Tag: para -#: boot-installer.xml:2859 +#: boot-installer.xml:2861 #, no-c-format msgid "This parameter sets the lowest priority of messages to be displayed." msgstr "" #. Tag: para -#: boot-installer.xml:2863 +#: boot-installer.xml:2865 #, no-c-format msgid "The default installation uses priority=high. This means that both high and critical priority messages are shown, but medium and low priority messages are skipped. If problems are encountered, the installer adjusts the priority as needed." msgstr "" #. Tag: para -#: boot-installer.xml:2870 +#: boot-installer.xml:2872 #, no-c-format msgid "If you add priority=medium as boot parameter, you will be shown the installation menu and gain more control over the installation. When priority=low is used, all messages are shown (this is equivalent to the expert boot method). With priority=critical, the installation system will display only critical messages and try to do the right thing without fuss." msgstr "" #. Tag: term -#: boot-installer.xml:2884 +#: boot-installer.xml:2886 #, no-c-format msgid "DEBIAN_FRONTEND" msgstr "" #. Tag: para -#: boot-installer.xml:2885 +#: boot-installer.xml:2887 #, no-c-format msgid "This boot parameter controls the type of user interface used for the installer. The current possible parameter settings are: DEBIAN_FRONTEND=noninteractive DEBIAN_FRONTEND=text DEBIAN_FRONTEND=newt DEBIAN_FRONTEND=gtk The default frontend is DEBIAN_FRONTEND=newt. DEBIAN_FRONTEND=text may be preferable for serial console installs. Generally, only the newt frontend is available on default install media. On architectures that support it, the graphical installer uses the gtk frontend." msgstr "" #. Tag: term -#: boot-installer.xml:2914 +#: boot-installer.xml:2916 #, no-c-format msgid "BOOT_DEBUG" msgstr "" #. Tag: para -#: boot-installer.xml:2915 +#: boot-installer.xml:2917 #, no-c-format msgid "Setting this boot parameter to 2 will cause the installer's boot process to be verbosely logged. Setting it to 3 makes debug shells available at strategic points in the boot process. (Exit the shells to continue the boot process.)" msgstr "" #. Tag: userinput -#: boot-installer.xml:2924 +#: boot-installer.xml:2926 #, no-c-format msgid "BOOT_DEBUG=0" msgstr "" #. Tag: para -#: boot-installer.xml:2925 +#: boot-installer.xml:2927 #, no-c-format msgid "This is the default." msgstr "" #. Tag: userinput -#: boot-installer.xml:2929 +#: boot-installer.xml:2931 #, no-c-format msgid "BOOT_DEBUG=1" msgstr "" #. Tag: para -#: boot-installer.xml:2930 +#: boot-installer.xml:2932 #, no-c-format msgid "More verbose than usual." msgstr "" #. Tag: userinput -#: boot-installer.xml:2934 +#: boot-installer.xml:2936 #, no-c-format msgid "BOOT_DEBUG=2" msgstr "" #. Tag: para -#: boot-installer.xml:2935 +#: boot-installer.xml:2937 #, no-c-format msgid "Lots of debugging information." msgstr "" #. Tag: userinput -#: boot-installer.xml:2939 +#: boot-installer.xml:2941 #, no-c-format msgid "BOOT_DEBUG=3" msgstr "" #. Tag: para -#: boot-installer.xml:2940 +#: boot-installer.xml:2942 #, no-c-format msgid "Shells are run at various points in the boot process to allow detailed debugging. Exit the shell to continue the boot." msgstr "" #. Tag: term -#: boot-installer.xml:2954 +#: boot-installer.xml:2956 #, no-c-format msgid "INSTALL_MEDIA_DEV" msgstr "" #. Tag: para -#: boot-installer.xml:2955 +#: boot-installer.xml:2957 #, no-c-format msgid "The value of the parameter is the path to the device to load the Debian installer from. For example, INSTALL_MEDIA_DEV=/dev/floppy/0" msgstr "" #. Tag: para -#: boot-installer.xml:2961 +#: boot-installer.xml:2963 #, no-c-format msgid "The boot floppy, which normally scans all floppies it can to find the root floppy, can be overridden by this parameter to only look at the one device." msgstr "" #. Tag: term -#: boot-installer.xml:2971 +#: boot-installer.xml:2973 #, no-c-format msgid "debian-installer/framebuffer (fb)" msgstr "" #. Tag: para -#: boot-installer.xml:2972 +#: boot-installer.xml:2974 #, no-c-format msgid "Some architectures use the kernel framebuffer to offer installation in a number of languages. If framebuffer causes a problem on your system you can disable the feature by the parameter fb=false. Problem symptoms are error messages about bterm or bogl, a blank screen, or a freeze within a few minutes after starting the install." msgstr "" #. Tag: para -#: boot-installer.xml:2981 +#: boot-installer.xml:2983 #, no-c-format msgid "The video=vga16:off argument may also be used to disable the kernel's use of the framebuffer. Such problems have been reported on a Dell Inspiron with Mobile Radeon card." msgstr "" #. Tag: para -#: boot-installer.xml:2987 +#: boot-installer.xml:2989 #, no-c-format msgid "Such problems have been reported on the Amiga 1200 and SE/30." msgstr "" #. Tag: para -#: boot-installer.xml:2991 +#: boot-installer.xml:2993 #, no-c-format msgid "Such problems have been reported on hppa." msgstr "" #. Tag: para -#: boot-installer.xml:2995 +#: boot-installer.xml:2997 #, no-c-format msgid "Because of display problems on some systems, framebuffer support is disabled by default for &arch-title;. This can result in ugly display on systems that do properly support the framebuffer, like those with ATI graphical cards. If you see display problems in the installer, you can try booting with parameter debian-installer/framebuffer=true or fb=true for short." msgstr "" #. Tag: term -#: boot-installer.xml:3009 +#: boot-installer.xml:3011 #, no-c-format msgid "debian-installer/theme (theme)" msgstr "" #. Tag: para -#: boot-installer.xml:3010 +#: boot-installer.xml:3012 #, no-c-format msgid "A theme determines how the user interface of the installer looks (colors, icons, etc.). What themes are available differs per frontend. Currently both the newt and gtk frontends only have a dark theme that was designed for visually impaired users. Set the theme by booting with theme=dark." msgstr "" #. Tag: term -#: boot-installer.xml:3022 +#: boot-installer.xml:3024 #, no-c-format msgid "debian-installer/probe/usb" msgstr "" #. Tag: para -#: boot-installer.xml:3023 +#: boot-installer.xml:3025 #, no-c-format msgid "Set to false to prevent probing for USB on boot, if that causes problems." msgstr "" #. Tag: term -#: boot-installer.xml:3032 boot-installer.xml:3223 +#: boot-installer.xml:3034 boot-installer.xml:3225 #, no-c-format msgid "netcfg/disable_dhcp" msgstr "" #. Tag: para -#: boot-installer.xml:3033 +#: boot-installer.xml:3035 #, no-c-format msgid "By default, the &d-i; automatically probes for network configuration via DHCP. If the probe succeeds, you won't have a chance to review and change the obtained settings. You can get to the manual network setup only in case the DHCP probe fails." msgstr "" #. Tag: para -#: boot-installer.xml:3040 +#: boot-installer.xml:3042 #, no-c-format msgid "If you have a DHCP server on your local network, but want to avoid it because e.g. it gives wrong answers, you can use the parameter netcfg/disable_dhcp=true to prevent configuring the network with DHCP and to enter the information manually." msgstr "" #. Tag: term -#: boot-installer.xml:3051 +#: boot-installer.xml:3053 #, no-c-format msgid "hw-detect/start_pcmcia" msgstr "" #. Tag: para -#: boot-installer.xml:3052 +#: boot-installer.xml:3054 #, no-c-format msgid "Set to false to prevent starting PCMCIA services, if that causes problems. Some laptops are well known for this misbehavior." msgstr "" #. Tag: term -#: boot-installer.xml:3062 +#: boot-installer.xml:3064 #, no-c-format msgid "preseed/url (url)" msgstr "" #. Tag: para -#: boot-installer.xml:3063 +#: boot-installer.xml:3065 #, no-c-format msgid "Specify the url to a preconfiguration file to download and use for automating the install. See ." msgstr "" #. Tag: term -#: boot-installer.xml:3072 +#: boot-installer.xml:3074 #, no-c-format msgid "preseed/file (file)" msgstr "" #. Tag: para -#: boot-installer.xml:3073 +#: boot-installer.xml:3075 #, no-c-format msgid "Specify the path to a preconfiguration file to load for automating the install. See ." msgstr "" #. Tag: term -#: boot-installer.xml:3082 +#: boot-installer.xml:3084 #, no-c-format msgid "preseed/interactive" msgstr "" #. Tag: para -#: boot-installer.xml:3083 +#: boot-installer.xml:3085 #, no-c-format msgid "Set to true to display questions even if they have been preseeded. Can be useful for testing or debugging a preconfiguration file. Note that this will have no effect on parameters that are passed as boot parameters, but for those a special syntax can be used. See for details." msgstr "" #. Tag: term -#: boot-installer.xml:3095 +#: boot-installer.xml:3097 #, no-c-format msgid "auto-install/enable (auto)" msgstr "" #. Tag: para -#: boot-installer.xml:3096 +#: boot-installer.xml:3098 #, no-c-format msgid "Delay questions that are normally asked before preseeding is possible until after the network is configured. See for details about using this to automate installs." msgstr "" #. Tag: term -#: boot-installer.xml:3107 +#: boot-installer.xml:3109 #, no-c-format msgid "cdrom-detect/eject" msgstr "" #. Tag: para -#: boot-installer.xml:3108 +#: boot-installer.xml:3110 #, no-c-format msgid "By default, before rebooting, &d-i; automatically ejects the optical media used during the installation. This can be unnecessary if the system does not automatically boot off the CD. In some cases it may even be undesirable, for example if the optical drive cannot reinsert the media itself and the user is not there to do it manually. Many slot loading, slim-line, and caddy style drives cannot reload media automatically." msgstr "" #. Tag: para -#: boot-installer.xml:3117 +#: boot-installer.xml:3119 #, no-c-format msgid "Set to false to disable automatic ejection, and be aware that you may need to ensure that the system does not automatically boot from the optical drive after the initial installation." msgstr "" #. Tag: term -#: boot-installer.xml:3128 +#: boot-installer.xml:3130 #, no-c-format msgid "debian-installer/allow_unauthenticated" msgstr "" #. Tag: para -#: boot-installer.xml:3129 +#: boot-installer.xml:3131 #, no-c-format msgid "By default the installer requires that repositories be authenticated using a known gpg key. Set to true to disable that authentication. Warning: insecure, not recommended." msgstr "" #. Tag: term -#: boot-installer.xml:3140 +#: boot-installer.xml:3142 #, no-c-format msgid "ramdisk_size" msgstr "" #. Tag: para -#: boot-installer.xml:3141 +#: boot-installer.xml:3143 #, no-c-format msgid "This parameter should already be set to a correct value where needed; set it only it you see errors during the boot that indicate the ramdisk could not be loaded completely. The value is in kB." msgstr "" #. Tag: term -#: boot-installer.xml:3151 +#: boot-installer.xml:3153 #, no-c-format msgid "mouse/left" msgstr "" #. Tag: para -#: boot-installer.xml:3152 +#: boot-installer.xml:3154 #, no-c-format msgid "For the gtk frontend (graphical installer), users can switch the mouse to left-handed operation by setting this parameter to true." msgstr "" #. Tag: term -#: boot-installer.xml:3161 +#: boot-installer.xml:3163 #, no-c-format msgid "directfb/hw-accel" msgstr "" #. Tag: para -#: boot-installer.xml:3162 +#: boot-installer.xml:3164 #, no-c-format msgid "For the gtk frontend (graphical installer), hardware acceleration in directfb is disabled by default. To enable it, set this parameter to true when booting the installer." msgstr "" #. Tag: term -#: boot-installer.xml:3172 +#: boot-installer.xml:3174 #, no-c-format msgid "rescue/enable" msgstr "" #. Tag: para -#: boot-installer.xml:3173 +#: boot-installer.xml:3175 #, no-c-format msgid "Set to true to enter rescue mode rather than performing a normal installation. See ." msgstr "" #. Tag: title -#: boot-installer.xml:3184 +#: boot-installer.xml:3186 #, no-c-format msgid "Using boot parameters to answer questions" msgstr "" #. Tag: para -#: boot-installer.xml:3185 +#: boot-installer.xml:3187 #, no-c-format msgid "With some exceptions, a value can be set at the boot prompt for any question asked during the installation, though this is only really useful in specific cases. General instructions how to do this can be found in . Some specific examples are listed below." msgstr "" #. Tag: term -#: boot-installer.xml:3197 +#: boot-installer.xml:3199 #, no-c-format msgid "debian-installer/locale (locale)" msgstr "" #. Tag: para -#: boot-installer.xml:3198 +#: boot-installer.xml:3200 #, no-c-format msgid "Can be used to set both the language and country for the installation. This will only work if the locale is supported in Debian. For example, use locale=de_CH to select German as language and Switzerland as country." msgstr "" #. Tag: term -#: boot-installer.xml:3209 +#: boot-installer.xml:3211 #, no-c-format msgid "anna/choose_modules (modules)" msgstr "" #. Tag: para -#: boot-installer.xml:3210 +#: boot-installer.xml:3212 #, no-c-format msgid "Can be used to automatically load installer components that are not loaded by default. Examples of optional components that may be useful are openssh-client-udeb (so you can use scp during the installation) and ppp-udeb (see )." msgstr "" #. Tag: para -#: boot-installer.xml:3224 +#: boot-installer.xml:3226 #, no-c-format msgid "Set to true if you want to disable DHCP and instead force static network configuration." msgstr "" #. Tag: term -#: boot-installer.xml:3233 +#: boot-installer.xml:3235 #, no-c-format msgid "mirror/protocol (protocol)" msgstr "" #. Tag: para -#: boot-installer.xml:3234 +#: boot-installer.xml:3236 #, no-c-format msgid "By default the installer will use the http protocol to download files from Debian mirrors and changing that to ftp is not possible during installations at normal priority. By setting this parameter to ftp, you can force the installer to use that protocol instead. Note that you cannot select an ftp mirror from a list, you have to enter the hostname manually." msgstr "" #. Tag: term -#: boot-installer.xml:3247 +#: boot-installer.xml:3249 #, no-c-format msgid "tasksel:tasksel/first (tasks)" msgstr "" #. Tag: para -#: boot-installer.xml:3248 +#: boot-installer.xml:3250 #, no-c-format msgid "Can be used to select tasks that are not available from the interactive task list, such as the kde-desktop task. See for additional information." msgstr "" #. Tag: title -#: boot-installer.xml:3262 +#: boot-installer.xml:3264 #, no-c-format msgid "Passing parameters to kernel modules" msgstr "" #. Tag: para -#: boot-installer.xml:3263 +#: boot-installer.xml:3265 #, no-c-format msgid "If drivers are compiled into the kernel, you can pass parameters to them as described in the kernel documentation. However, if drivers are compiled as modules and because kernel modules are loaded a bit differently during an installation than when booting an installed system, it is not possible to pass parameters to modules as you would normally do. Instead, you need to use a special syntax recognized by the installer which will then make sure that the parameters are saved in the proper configuration files and will thus be used when the modules are actually loaded. The parameters will also be propagated automatically to the configuration for the installed system." msgstr "" #. Tag: para -#: boot-installer.xml:3276 +#: boot-installer.xml:3278 #, no-c-format msgid "Note that it is now quite rare that parameters need to be passed to modules. In most cases the kernel will be able to probe the hardware present in a system and set good defaults that way. However, in some situations it may still be needed to set parameters manually." msgstr "" #. Tag: para -#: boot-installer.xml:3283 +#: boot-installer.xml:3285 #, no-c-format msgid "" "The syntax to use to set parameters for modules is: \n" @@ -2285,133 +2285,133 @@ msgid "" msgstr "" #. Tag: screen -#: boot-installer.xml:3293 +#: boot-installer.xml:3295 #, no-c-format msgid "3c509.xcvr=3 3c509.irq=10" msgstr "" #. Tag: title -#: boot-installer.xml:3299 +#: boot-installer.xml:3301 #, no-c-format msgid "Blacklisting kernel modules" msgstr "" #. Tag: para -#: boot-installer.xml:3300 +#: boot-installer.xml:3302 #, no-c-format msgid "Sometimes it may be necessary to blacklist a module to prevent it from being loaded automatically by the kernel and udev. One reason could be that a particular module causes problems with your hardware. The kernel also sometimes lists two different drivers for the same device. This can cause the device to not work correctly if the drivers conflict or if the wrong driver is loaded first." msgstr "" #. Tag: para -#: boot-installer.xml:3309 +#: boot-installer.xml:3311 #, no-c-format msgid "You can blacklist a module using the following syntax: module_name.blacklist=yes. This will cause the module to be blacklisted in /etc/modprobe.d/blacklist.local both during the installation and for the installed system." msgstr "" #. Tag: para -#: boot-installer.xml:3317 +#: boot-installer.xml:3319 #, no-c-format msgid "Note that a module may still be loaded by the installation system itself. You can prevent that from happening by running the installation in expert mode and unselecting the module from the list of modules displayed during the hardware detection phases." msgstr "" #. Tag: title -#: boot-installer.xml:3334 +#: boot-installer.xml:3336 #, no-c-format msgid "Troubleshooting the Installation Process" msgstr "" #. Tag: title -#: boot-installer.xml:3339 +#: boot-installer.xml:3341 #, no-c-format msgid "CD-ROM Reliability" msgstr "" #. Tag: para -#: boot-installer.xml:3340 +#: boot-installer.xml:3342 #, no-c-format msgid "Sometimes, especially with older CD-ROM drives, the installer may fail to boot from a CD-ROM. The installer may also — even after booting successfully from CD-ROM — fail to recognize the CD-ROM or return errors while reading from it during the installation." msgstr "" #. Tag: para -#: boot-installer.xml:3347 +#: boot-installer.xml:3349 #, no-c-format msgid "There are a many different possible causes for these problems. We can only list some common issues and provide general suggestions on how to deal with them. The rest is up to you." msgstr "" #. Tag: para -#: boot-installer.xml:3353 +#: boot-installer.xml:3355 #, no-c-format msgid "There are two very simple things that you should try first." msgstr "" #. Tag: para -#: boot-installer.xml:3358 +#: boot-installer.xml:3360 #, no-c-format msgid "If the CD-ROM does not boot, check that it was inserted correctly and that it is not dirty." msgstr "" #. Tag: para -#: boot-installer.xml:3364 +#: boot-installer.xml:3366 #, no-c-format msgid "If the installer fails to recognize a CD-ROM, try just running the option Detect and mount CD-ROM a second time. Some DMA related issues with older CD-ROM drives are known to be resolved in this way." msgstr "" #. Tag: para -#: boot-installer.xml:3374 +#: boot-installer.xml:3376 #, no-c-format msgid "If this does not work, then try the suggestions in the subsections below. Most, but not all, suggestions discussed there are valid for both CD-ROM and DVD, but we'll use the term CD-ROM for simplicity." msgstr "" #. Tag: para -#: boot-installer.xml:3380 +#: boot-installer.xml:3382 #, no-c-format msgid "If you cannot get the installation working from CD-ROM, try one of the other installation methods that are available." msgstr "" #. Tag: title -#: boot-installer.xml:3388 +#: boot-installer.xml:3390 #, no-c-format msgid "Common issues" msgstr "" #. Tag: para -#: boot-installer.xml:3391 +#: boot-installer.xml:3393 #, no-c-format msgid "Some older CD-ROM drives do not support reading from discs that were burned at high speeds using a modern CD writer." msgstr "" #. Tag: para -#: boot-installer.xml:3397 +#: boot-installer.xml:3399 #, no-c-format msgid "If your system boots correctly from the CD-ROM, it does not necessarily mean that Linux also supports the CD-ROM (or, more correctly, the controller that your CD-ROM drive is connected to)." msgstr "" #. Tag: para -#: boot-installer.xml:3404 +#: boot-installer.xml:3406 #, no-c-format msgid "Some older CD-ROM drives do not work correctly if direct memory access (DMA) is enabled." msgstr "" #. Tag: title -#: boot-installer.xml:3415 +#: boot-installer.xml:3417 #, no-c-format msgid "How to investigate and maybe solve issues" msgstr "" #. Tag: para -#: boot-installer.xml:3416 +#: boot-installer.xml:3418 #, no-c-format msgid "If the CD-ROM fails to boot, try the suggestions listed below." msgstr "" #. Tag: para -#: boot-installer.xml:3421 +#: boot-installer.xml:3423 #, no-c-format msgid "Check that your BIOS actually supports booting from CD-ROM (older systems possibly don't) and that your CD-ROM drive supports the media you are using." msgstr "" #. Tag: para -#: boot-installer.xml:3427 +#: boot-installer.xml:3429 #, no-c-format msgid "" "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from. \n" @@ -2421,7 +2421,7 @@ msgid "" msgstr "" #. Tag: screen -#: boot-installer.xml:3440 +#: boot-installer.xml:3442 #, no-c-format msgid "" "$ dd if=/dev/cdrom | \\\n" @@ -2434,19 +2434,19 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3445 +#: boot-installer.xml:3447 #, no-c-format msgid "If, after the installer has been booted successfully, the CD-ROM is not detected, sometimes simply trying again may solve the problem. If you have more than one CD-ROM drive, try changing the CD-ROM to the other drive. If that does not work or if the CD-ROM is recognized but there are errors when reading from it, try the suggestions listed below. Some basic knowledge of Linux is required for this. To execute any of the commands, you should first switch to the second virtual console (VT2) and activate the shell there." msgstr "" #. Tag: para -#: boot-installer.xml:3457 +#: boot-installer.xml:3459 #, no-c-format msgid "Switch to VT4 or view the contents of /var/log/syslog (use nano as editor) to check for any specific error messages. After that, also check the output of dmesg." msgstr "" #. Tag: para -#: boot-installer.xml:3464 +#: boot-installer.xml:3466 #, no-c-format msgid "" "Check in the output of dmesg if your CD-ROM drive was recognized. You should see something like (the lines do not necessarily have to be consecutive): \n" @@ -2459,13 +2459,13 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3478 +#: boot-installer.xml:3480 #, no-c-format msgid "Check that there is a device node for your CD-ROM drive under /dev/. In the example above, this would be /dev/hdc. There should also be a /dev/cdroms/cdrom0." msgstr "" #. Tag: para -#: boot-installer.xml:3486 +#: boot-installer.xml:3488 #, no-c-format msgid "" "Use the mount command to check if the CD-ROM is already mounted; if not, try mounting it manually: \n" @@ -2474,7 +2474,7 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3496 +#: boot-installer.xml:3498 #, no-c-format msgid "" "Check if DMA is currently enabled: \n" @@ -2487,157 +2487,157 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3511 +#: boot-installer.xml:3513 #, no-c-format msgid "If there are any problems during the installation, try checking the integrity of the CD-ROM using the option near the bottom of the installer's main menu. This option can also be used as a general test if the CD-ROM can be read reliably." msgstr "" #. Tag: title -#: boot-installer.xml:3526 +#: boot-installer.xml:3528 #, no-c-format msgid "Floppy Disk Reliability" msgstr "" #. Tag: para -#: boot-installer.xml:3528 +#: boot-installer.xml:3530 #, no-c-format msgid "The biggest problem for people using floppy disks to install Debian seems to be floppy disk reliability." msgstr "" #. Tag: para -#: boot-installer.xml:3533 +#: boot-installer.xml:3535 #, no-c-format msgid "The boot floppy is the floppy with the worst problems, because it is read by the hardware directly, before Linux boots. Often, the hardware doesn't read as reliably as the Linux floppy disk driver, and may just stop without printing an error message if it reads incorrect data. There can also be failures in the driver floppies, most of which indicate themselves with a flood of messages about disk I/O errors." msgstr "" #. Tag: para -#: boot-installer.xml:3542 +#: boot-installer.xml:3544 #, no-c-format msgid "If you are having the installation stall at a particular floppy, the first thing you should do is write the image to a different floppy and see if that solves the problem. Simply reformatting the old floppy may not be sufficient, even if it appears that the floppy was reformatted and written with no errors. It is sometimes useful to try writing the floppy on a different system." msgstr "" #. Tag: para -#: boot-installer.xml:3551 +#: boot-installer.xml:3553 #, no-c-format msgid "One user reports he had to write the images to floppy three times before one worked, and then everything was fine with the third floppy." msgstr "" #. Tag: para -#: boot-installer.xml:3557 +#: boot-installer.xml:3559 #, no-c-format msgid "Normally you should not have to download a floppy image again, but if you are experiencing problems it is always useful to verify that the images were downloaded correctly by verifying their md5sums." msgstr "" #. Tag: para -#: boot-installer.xml:3563 +#: boot-installer.xml:3565 #, no-c-format msgid "Other users have reported that simply rebooting a few times with the same floppy in the floppy drive can lead to a successful boot. This is all due to buggy hardware or firmware floppy drivers." msgstr "" #. Tag: title -#: boot-installer.xml:3572 +#: boot-installer.xml:3574 #, no-c-format msgid "Boot Configuration" msgstr "" #. Tag: para -#: boot-installer.xml:3574 +#: boot-installer.xml:3576 #, no-c-format msgid "If you have problems and the kernel hangs during the boot process, doesn't recognize peripherals you actually have, or drives are not recognized properly, the first thing to check is the boot parameters, as discussed in ." msgstr "" #. Tag: para -#: boot-installer.xml:3581 +#: boot-installer.xml:3583 #, no-c-format msgid "Often, problems can be solved by removing add-ons and peripherals, and then trying booting again. Internal modems, sound cards, and Plug-n-Play devices can be especially problematic." msgstr "" #. Tag: para -#: boot-installer.xml:3587 +#: boot-installer.xml:3589 #, no-c-format msgid "If you have a large amount of memory installed in your machine, more than 512M, and the installer hangs when booting the kernel, you may need to include a boot argument to limit the amount of memory the kernel sees, such as mem=512m." msgstr "" #. Tag: title -#: boot-installer.xml:3598 boot-installer.xml:3683 +#: boot-installer.xml:3600 boot-installer.xml:3685 #, no-c-format msgid "Common &arch-title; Installation Problems" msgstr "" #. Tag: para -#: boot-installer.xml:3599 +#: boot-installer.xml:3601 #, no-c-format msgid "There are some common installation problems that can be solved or avoided by passing certain boot parameters to the installer." msgstr "" #. Tag: para -#: boot-installer.xml:3604 +#: boot-installer.xml:3606 #, no-c-format msgid "Some systems have floppies with inverted DCLs. If you receive errors reading from the floppy, even when you know the floppy is good, try the parameter floppy=thinkpad." msgstr "" #. Tag: para -#: boot-installer.xml:3610 +#: boot-installer.xml:3612 #, no-c-format msgid "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk drivers), the IDE drive may not be properly recognized. Again, try it first without the parameters and see if the IDE drive is recognized properly. If not, determine your drive geometry (cylinders, heads, and sectors), and use the parameter hd=cylinders,heads,sectors." msgstr "" #. Tag: para -#: boot-installer.xml:3619 +#: boot-installer.xml:3621 #, no-c-format msgid "If you have a very old machine, and the kernel hangs after saying Checking 'hlt' instruction..., then you should try the no-hlt boot argument, which disables this test." msgstr "" #. Tag: para -#: boot-installer.xml:3626 +#: boot-installer.xml:3628 #, no-c-format msgid "If your screen begins to show a weird picture while the kernel boots, eg. pure white, pure black or colored pixel garbage, your system may contain a problematic video card which does not switch to the framebuffer mode properly. Then you can use the boot parameter fb=false video=vga16:off to disable the framebuffer console. Only a reduced set of languages will be available during the installation due to limited console features. See for details." msgstr "" #. Tag: title -#: boot-installer.xml:3640 +#: boot-installer.xml:3642 #, no-c-format msgid "System Freeze During the PCMCIA Configuration Phase" msgstr "" #. Tag: para -#: boot-installer.xml:3641 +#: boot-installer.xml:3643 #, no-c-format msgid "Some laptop models produced by Dell are known to crash when PCMCIA device detection tries to access some hardware addresses. Other laptops may display similar problems. If you experience such a problem and you don't need PCMCIA support during the installation, you can disable PCMCIA using the hw-detect/start_pcmcia=false boot parameter. You can then configure PCMCIA after the installation is completed and exclude the resource range causing the problems." msgstr "" #. Tag: para -#: boot-installer.xml:3651 +#: boot-installer.xml:3653 #, no-c-format msgid "Alternatively, you can boot the installer in expert mode. You will then be asked to enter the resource range options your hardware needs. For example, if you have one of the Dell laptops mentioned above, you should enter exclude port 0x800-0x8ff here. There is also a list of some common resource range options in the System resource settings section of the PCMCIA HOWTO. Note that you have to omit the commas, if any, when you enter this value in the installer." msgstr "" #. Tag: title -#: boot-installer.xml:3668 +#: boot-installer.xml:3670 #, no-c-format msgid "System Freeze while Loading USB Modules" msgstr "" #. Tag: para -#: boot-installer.xml:3669 +#: boot-installer.xml:3671 #, no-c-format msgid "The kernel normally tries to install USB modules and the USB keyboard driver in order to support some non-standard USB keyboards. However, there are some broken USB systems where the driver hangs on loading. A possible workaround may be disabling the USB controller in your mainboard BIOS setup. Another option is passing the debian-installer/probe/usb=false parameter at the boot prompt, which will prevent the modules from being loaded." msgstr "" #. Tag: para -#: boot-installer.xml:3684 +#: boot-installer.xml:3686 #, no-c-format msgid "There are some common installation problems that are worth mentioning." msgstr "" #. Tag: title -#: boot-installer.xml:3690 +#: boot-installer.xml:3692 #, no-c-format msgid "Misdirected video output" msgstr "" #. Tag: para -#: boot-installer.xml:3691 +#: boot-installer.xml:3693 #, no-c-format msgid "" "It is fairly common for &arch-title; to have two video cards in one machine, for example an ATI card and a Sun Creator 3D. In some cases, this may result in the video output getting misdirected soon after the system boots. In typical cases, the display will only show: \n" @@ -2647,85 +2647,85 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:3705 +#: boot-installer.xml:3707 #, no-c-format msgid "Note that you may also have to manually add this parameter to the silo configuration (edit /target/etc/silo.conf before rebooting) and, if you installed X11, modify the video driver in /etc/X11/xorg.conf." msgstr "" #. Tag: title -#: boot-installer.xml:3716 +#: boot-installer.xml:3718 #, no-c-format msgid "Failure to Boot or Install from CD-ROM" msgstr "" #. Tag: para -#: boot-installer.xml:3717 +#: boot-installer.xml:3719 #, no-c-format msgid "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if they do boot, there may be inexplicable failures during the installation. Most problems have been reported with SunBlade systems." msgstr "" #. Tag: para -#: boot-installer.xml:3723 +#: boot-installer.xml:3725 #, no-c-format msgid "We recommend to install such systems by netbooting the installer." msgstr "" #. Tag: title -#: boot-installer.xml:3732 +#: boot-installer.xml:3734 #, no-c-format msgid "Interpreting the Kernel Startup Messages" msgstr "" #. Tag: para -#: boot-installer.xml:3734 +#: boot-installer.xml:3736 #, no-c-format msgid "During the boot sequence, you may see many messages in the form can't find something, or something not present, can't initialize something, or even this driver release depends on something. Most of these messages are harmless. You see them because the kernel for the installation system is built to run on computers with many different peripheral devices. Obviously, no one computer will have every possible peripheral device, so the operating system may emit a few complaints while it looks for peripherals you don't own. You may also see the system pause for a while. This happens when it is waiting for a device to respond, and that device is not present on your system. If you find the time it takes to boot the system unacceptably long, you can create a custom kernel later (see )." msgstr "" #. Tag: title -#: boot-installer.xml:3759 +#: boot-installer.xml:3761 #, no-c-format msgid "Reporting Installation Problems" msgstr "" #. Tag: para -#: boot-installer.xml:3760 +#: boot-installer.xml:3762 #, no-c-format msgid "If you get through the initial boot phase but cannot complete the install, the menu option Save debug logs may be helpful. It lets you store system error logs and configuration information from the installer to a floppy, or download them using a web browser. This information may provide clues as to what went wrong and how to fix it. If you are submitting a bug report, you may want to attach this information to the bug report." msgstr "" #. Tag: para -#: boot-installer.xml:3771 +#: boot-installer.xml:3773 #, no-c-format msgid "Other pertinent installation messages may be found in /var/log/ during the installation, and /var/log/installer/ after the computer has been booted into the installed system." msgstr "" #. Tag: title -#: boot-installer.xml:3782 +#: boot-installer.xml:3784 #, no-c-format msgid "Submitting Installation Reports" msgstr "" #. Tag: para -#: boot-installer.xml:3783 +#: boot-installer.xml:3785 #, no-c-format msgid "If you still have problems, please submit an installation report. We also encourage installation reports to be sent even if the installation is successful, so that we can get as much information as possible on the largest number of hardware configurations." msgstr "" #. Tag: para -#: boot-installer.xml:3790 +#: boot-installer.xml:3792 #, no-c-format msgid "Note that your installation report will be published in the Debian Bug Tracking System (BTS) and forwarded to a public mailing list. Make sure that you use an e-mail address that you do not mind being made public." msgstr "" #. Tag: para -#: boot-installer.xml:3796 +#: boot-installer.xml:3798 #, no-c-format msgid "If you have a working Debian system, the easiest way to send an installation report is to install the installation-report and reportbug packages (aptitude install installation-report reportbug), configure reportbug as explained in , and run the command reportbug installation-reports." msgstr "" #. Tag: para -#: boot-installer.xml:3806 +#: boot-installer.xml:3808 #, no-c-format msgid "" "Alternatively you can use this template when filling out installation reports, and file the report as a bug report against the installation-reports pseudo package, by sending it to submit@bugs.debian.org. \n" diff --git a/po/pot/boot-new.pot b/po/pot/boot-new.pot index 0a9886b6e..275b08f07 100644 --- a/po/pot/boot-new.pot +++ b/po/pot/boot-new.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2006-12-27 20:04+0000\n" +"POT-Creation-Date: 2007-02-27 20:31+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -95,113 +95,113 @@ msgstr "" #. Tag: para #: boot-new.xml:88 #, no-c-format -msgid "Go to the directory containing the installation files and start up the Penguin booter, holding down the command key. Go to the Settings dialogue ( command T ), and locate the kernel options line which should look like root=/dev/ram video=font:VGA8x16 or similar." +msgid "Go to the directory containing the installation files and start up the Penguin booter, holding down the command key. Go to the Settings dialogue ( command T ), and locate the kernel options line which should look like root=/dev/ram ramdisk_size=15000 or similar." msgstr "" #. Tag: para #: boot-new.xml:98 #, no-c-format -msgid "You need to change the entry to root=/dev/yyyy. Replace the yyyy with the Linux name of the partition onto which you installed the system (e.g. /dev/sda1); you wrote this down earlier. The video=font:VGA8x8 is recommended especially for users with tiny screens. The kernel would pick a prettier (6x11) font but the console driver for this font can hang the machine, so using 8x16 or 8x8 is safer at this stage. You can change this at any time." +msgid "You need to change the entry to root=/dev/yyyy. Replace the yyyy with the Linux name of the partition onto which you installed the system (e.g. /dev/sda1); you wrote this down earlier. For users with tiny screens, adding fbcon=font:VGA8x8 (or video=font:VGA8x8 on pre-2.6 kernels) may help readability. You can change this at any time." msgstr "" #. Tag: para -#: boot-new.xml:111 +#: boot-new.xml:109 #, no-c-format msgid "If you don't want to start GNU/Linux immediately each time you start, uncheck the Auto Boot option. Save your settings in the Prefs file using the Save Settings As Default option." msgstr "" #. Tag: para -#: boot-new.xml:118 +#: boot-new.xml:116 #, no-c-format msgid "Now select Boot Now ( command B ) to start your freshly installed GNU/Linux instead of the RAMdisk installer system." msgstr "" #. Tag: para -#: boot-new.xml:124 +#: boot-new.xml:122 #, no-c-format msgid "Debian should boot, and you should see the same messages as when you first booted the installation system, followed by some new messages." msgstr "" #. Tag: title -#: boot-new.xml:134 +#: boot-new.xml:132 #, no-c-format msgid "OldWorld PowerMacs" msgstr "" #. Tag: para -#: boot-new.xml:135 +#: boot-new.xml:133 #, no-c-format msgid "If the machine fails to boot after completing the installation, and stops with a boot: prompt, try typing Linux followed by &enterkey;. (The default boot configuration in quik.conf is labeled Linux). The labels defined in quik.conf will be displayed if you press the Tab key at the boot: prompt. You can also try booting back into the installer, and editing the /target/etc/quik.conf placed there by the Install Quik on a Hard Disk step. Clues for dealing with quik are available at ." msgstr "" #. Tag: para -#: boot-new.xml:149 +#: boot-new.xml:147 #, no-c-format msgid "To boot back into MacOS without resetting the nvram, type bye at the OpenFirmware prompt (assuming MacOS has not been removed from the machine). To obtain an OpenFirmware prompt, hold down the command option o f keys while cold booting the machine. If you need to reset the OpenFirmware nvram changes to the MacOS default in order to boot back to MacOS, hold down the command option p r keys while cold booting the machine." msgstr "" #. Tag: para -#: boot-new.xml:162 +#: boot-new.xml:160 #, no-c-format msgid "If you use BootX to boot into the installed system, just select your desired kernel in the Linux Kernels folder, un-choose the ramdisk option, and add a root device corresponding to your installation; e.g. /dev/hda8." msgstr "" #. Tag: title -#: boot-new.xml:174 +#: boot-new.xml:172 #, no-c-format msgid "NewWorld PowerMacs" msgstr "" #. Tag: para -#: boot-new.xml:175 +#: boot-new.xml:173 #, no-c-format msgid "On G4 machines and iBooks, you can hold down the option key and get a graphical screen with a button for each bootable OS, &debian; will be a button with a small penguin icon." msgstr "" #. Tag: para -#: boot-new.xml:182 +#: boot-new.xml:180 #, no-c-format msgid "If you kept MacOS and at some point it changes the OpenFirmware boot-device variable you should reset OpenFirmware to its default configuration. To do this hold down the command option p r keys while cold booting the machine." msgstr "" #. Tag: para -#: boot-new.xml:190 +#: boot-new.xml:188 #, no-c-format msgid "The labels defined in yaboot.conf will be displayed if you press the Tab key at the boot: prompt." msgstr "" #. Tag: para -#: boot-new.xml:196 +#: boot-new.xml:194 #, no-c-format msgid "Resetting OpenFirmware on G3 or G4 hardware will cause it to boot &debian; by default (if you correctly partitioned and placed the Apple_Bootstrap partition first). If you have &debian; on a SCSI disk and MacOS on an IDE disk this may not work and you will have to enter OpenFirmware and set the boot-device variable, ybin normally does this automatically." msgstr "" #. Tag: para -#: boot-new.xml:205 +#: boot-new.xml:203 #, no-c-format msgid "After you boot &debian; for the first time you can add any additional options you desire (such as dual boot options) to /etc/yaboot.conf and run ybin to update your boot partition with the changed configuration. Please read the yaboot HOWTO for more information." msgstr "" #. Tag: title -#: boot-new.xml:223 +#: boot-new.xml:221 #, no-c-format msgid "Mounting encrypted volumes" msgstr "" #. Tag: para -#: boot-new.xml:225 +#: boot-new.xml:223 #, no-c-format msgid "If you created encrypted volumes during the installation and assigned them mount points, you will be asked to enter the passphrase for each of these volumes during the boot. The actual procedure differs slightly between dm-crypt and loop-AES." msgstr "" #. Tag: title -#: boot-new.xml:235 +#: boot-new.xml:233 #, no-c-format msgid "dm-crypt" msgstr "" #. Tag: para -#: boot-new.xml:237 +#: boot-new.xml:235 #, no-c-format msgid "" "For partitions encrypted using dm-crypt you will be shown the following prompt during the boot: \n" @@ -211,13 +211,13 @@ msgid "" msgstr "" #. Tag: para -#: boot-new.xml:260 +#: boot-new.xml:258 #, no-c-format msgid "The prompt may look somewhat different when an encrypted root file system is mounted. This depends on which initramfs generator was used to generate the initrd used to boot the system. The example below is for an initrd generated using initramfs-tools:" msgstr "" #. Tag: screen -#: boot-new.xml:267 +#: boot-new.xml:265 #, no-c-format msgid "" "Begin: Mounting root file system... ...\n" @@ -226,31 +226,31 @@ msgid "" msgstr "" #. Tag: para -#: boot-new.xml:269 boot-new.xml:294 +#: boot-new.xml:267 boot-new.xml:292 #, no-c-format msgid "No characters (even asterisks) will be shown while entering the passphrase. If you enter the wrong passphrase, you have two more tries to correct it. After the third try the boot process will skip this volume and continue to mount the next filesystem. Please see for further information." msgstr "" #. Tag: para -#: boot-new.xml:277 boot-new.xml:302 +#: boot-new.xml:275 boot-new.xml:300 #, no-c-format msgid "After entering all passphrases the boot should continue as usual." msgstr "" #. Tag: title -#: boot-new.xml:285 +#: boot-new.xml:283 #, no-c-format msgid "loop-AES" msgstr "" #. Tag: para -#: boot-new.xml:287 +#: boot-new.xml:285 #, no-c-format msgid "For partitions encrypted using loop-AES you will be shown the following prompt during the boot:" msgstr "" #. Tag: screen -#: boot-new.xml:292 +#: boot-new.xml:290 #, no-c-format msgid "" "Checking loop-encrypted file systems.\n" @@ -259,25 +259,25 @@ msgid "" msgstr "" #. Tag: title -#: boot-new.xml:310 +#: boot-new.xml:308 #, no-c-format msgid "Troubleshooting" msgstr "" #. Tag: para -#: boot-new.xml:312 +#: boot-new.xml:310 #, no-c-format msgid "If some of the encrypted volumes could not be mounted because a wrong passphrase was entered, you will have to mount them manually after the boot. There are several cases." msgstr "" #. Tag: para -#: boot-new.xml:321 +#: boot-new.xml:319 #, no-c-format msgid "The first case concerns the root partition. When it is not mounted correctly, the boot process will halt and you will have to reboot the computer to try again." msgstr "" #. Tag: para -#: boot-new.xml:328 +#: boot-new.xml:326 #, no-c-format msgid "" "The easiest case is for encrypted volumes holding data like /home or /srv. You can simply mount them manually after the boot. For loop-AES this is one-step operation: \n" @@ -287,7 +287,7 @@ msgid "" msgstr "" #. Tag: para -#: boot-new.xml:342 +#: boot-new.xml:340 #, no-c-format msgid "" "For dm-crypt this is a bit trickier. First you need to register the volumes with device mapper by running: \n" @@ -296,13 +296,13 @@ msgid "" msgstr "" #. Tag: screen -#: boot-new.xml:357 +#: boot-new.xml:355 #, no-c-format msgid "# mount /mount_point" msgstr "" #. Tag: para -#: boot-new.xml:360 +#: boot-new.xml:358 #, no-c-format msgid "" "If any volume holding noncritical system files could not be mounted (/usr or /var), the system should still boot and you should be able to mount the volumes manually like in the previous case. However, you will also need to (re)start any services usually running in your default runlevel because it is very likely that they were not started. The easiest way to achieve this is by switching to the first runlevel and back by entering \n" @@ -311,37 +311,37 @@ msgid "" msgstr "" #. Tag: title -#: boot-new.xml:383 +#: boot-new.xml:381 #, no-c-format msgid "Log In" msgstr "" #. Tag: para -#: boot-new.xml:385 +#: boot-new.xml:383 #, no-c-format msgid "Once your system boots, you'll be presented with the login prompt. Log in using the personal login and password you selected during the installation process. Your system is now ready for use." msgstr "" #. Tag: para -#: boot-new.xml:391 +#: boot-new.xml:389 #, no-c-format msgid "If you are a new user, you may want to explore the documentation which is already installed on your system as you start to use it. There are currently several documentation systems, work is proceeding on integrating the different types of documentation. Here are a few starting points." msgstr "" #. Tag: para -#: boot-new.xml:399 +#: boot-new.xml:397 #, no-c-format msgid "Documentation accompanying programs you have installed can be found in /usr/share/doc/, under a subdirectory named after the program (or, more precise, the Debian package that contains the program). However, more extensive documentation is often packaged separately in special documentation packages that are mostly not installed by default. For example, documentation about the package management tool apt can be found in the packages apt-doc or apt-howto." msgstr "" #. Tag: para -#: boot-new.xml:410 +#: boot-new.xml:408 #, no-c-format msgid "In addition, there are some special folders within the /usr/share/doc/ hierarchy. Linux HOWTOs are installed in .gz (compressed) format, in /usr/share/doc/HOWTO/en-txt/. After installing dhelp, you will find a browse-able index of documentation in /usr/share/doc/HTML/index.html." msgstr "" #. Tag: para -#: boot-new.xml:419 +#: boot-new.xml:417 #, no-c-format msgid "" "One easy way to view these documents using a text based browser is to enter the following commands: \n" @@ -351,13 +351,13 @@ msgid "" msgstr "" #. Tag: para -#: boot-new.xml:429 +#: boot-new.xml:427 #, no-c-format msgid "If you have a graphical desktop environment installed, you can also use its web browser. Start the web browser from the application menu and enter /usr/share/doc/ in the address bar." msgstr "" #. Tag: para -#: boot-new.xml:435 +#: boot-new.xml:433 #, no-c-format msgid "You can also type info command or man command to see documentation on most commands available at the command prompt. Typing help will display help on shell commands. And typing a command followed by --help will usually display a short summary of the command's usage. If a command's results scroll past the top of the screen, type | more after the command to cause the results to pause before scrolling past the top of the screen. To see a list of all commands available which begin with a certain letter, type the letter and then two tabs." msgstr "" diff --git a/po/pot/install-methods.pot b/po/pot/install-methods.pot index f4dc62ad0..e76dce302 100644 --- a/po/pot/install-methods.pot +++ b/po/pot/install-methods.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2007-01-07 13:24+0000\n" +"POT-Creation-Date: 2007-02-27 20:31+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -221,272 +221,278 @@ msgstr "" #. Tag: para #: install-methods.xml:320 #, no-c-format +msgid "Before you can create the floppies, you will first need to download them from one of the Debian mirrors, as explained in . If you already have an installation CD-ROM or DVD, the floppy images may also be included on the CD/DVD." +msgstr "" + +#. Tag: para +#: install-methods.xml:328 +#, no-c-format msgid "No matter which method you use to create your floppies, you should remember to flip the write-protect tab on the floppies once you have written them, to ensure they are not damaged unintentionally." msgstr "" #. Tag: title -#: install-methods.xml:328 +#: install-methods.xml:336 #, no-c-format msgid "Writing Disk Images From a Linux or Unix System" msgstr "" #. Tag: para -#: install-methods.xml:329 +#: install-methods.xml:337 #, no-c-format msgid "" "To write the floppy disk image files to the floppy disks, you will probably need root access to the system. Place a good, blank floppy in the floppy drive. Next, use the command \n" "$ dd if=filename of=/dev/fd0 bs=1024 conv=sync ; sync\n" - " where filename is one of the floppy disk image files (see for what filename should be). /dev/fd0 is a commonly used name of the floppy disk device, it may be different on your workstation (on Solaris, it is /dev/fd/0). The command may return to the prompt before Unix has finished writing the floppy disk, so look for the disk-in-use light on the floppy drive and be sure that the light is out and the disk has stopped revolving before you remove it from the drive. On some systems, you'll have to run a command to eject the floppy from the drive (on Solaris, use eject, see the manual page)." + " where filename is one of the floppy disk image files. /dev/fd0 is a commonly used name of the floppy disk device, it may be different on your workstation (on Solaris, it is /dev/fd/0). The command may return to the prompt before Unix has finished writing the floppy disk, so look for the disk-in-use light on the floppy drive and be sure that the light is out and the disk has stopped revolving before you remove it from the drive. On some systems, you'll have to run a command to eject the floppy from the drive (on Solaris, use eject, see the manual page)." msgstr "" #. Tag: para -#: install-methods.xml:353 +#: install-methods.xml:358 #, no-c-format msgid "Some systems attempt to automatically mount a floppy disk when you place it in the drive. You might have to disable this feature before the workstation will allow you to write a floppy in raw mode. Unfortunately, how to accomplish this will vary based on your operating system. On Solaris, you can work around volume management to get raw access to the floppy. First, make sure that the floppy is auto-mounted (using volcheck or the equivalent command in the file manager). Then use a dd command of the form given above, just replace /dev/fd0 with /vol/rdsk/floppy_name, where floppy_name is the name the floppy disk was given when it was formatted (unnamed floppies default to the name unnamed_floppy). On other systems, ask your system administrator. " msgstr "" #. Tag: para -#: install-methods.xml:374 +#: install-methods.xml:379 #, no-c-format msgid "If writing a floppy on powerpc Linux, you will need to eject it. The eject program handles this nicely; you might need to install it." msgstr "" #. Tag: title -#: install-methods.xml:392 +#: install-methods.xml:397 #, no-c-format msgid "Writing Disk Images From DOS, Windows, or OS/2" msgstr "" #. Tag: para -#: install-methods.xml:394 +#: install-methods.xml:399 #, no-c-format msgid "If you have access to an i386 or amd64 machine, you can use one of the following programs to copy images to floppies." msgstr "" #. Tag: para -#: install-methods.xml:399 +#: install-methods.xml:404 #, no-c-format msgid "The rawrite1 and rawrite2 programs can be used under MS-DOS. To use these programs, first make sure that you are booted into DOS. Trying to use these programs from within a DOS box in Windows, or double-clicking on these programs from the Windows Explorer is not expected to work." msgstr "" #. Tag: para -#: install-methods.xml:407 +#: install-methods.xml:412 #, no-c-format msgid "The rwwrtwin program runs on Windows 95, NT, 98, 2000, ME, XP and probably later versions. To use it you will need to unpack diskio.dll in the same directory." msgstr "" #. Tag: para -#: install-methods.xml:413 +#: install-methods.xml:418 #, no-c-format msgid "These tools can be found on the Official Debian CD-ROMs under the /tools directory." msgstr "" #. Tag: title -#: install-methods.xml:426 +#: install-methods.xml:431 #, no-c-format msgid "Writing Disk Images on Atari Systems" msgstr "" #. Tag: para -#: install-methods.xml:427 +#: install-methods.xml:432 #, no-c-format msgid "You'll find the &rawwrite.ttp; program in the same directory as the floppy disk images. Start the program by double clicking on the program icon, and type in the name of the floppy image file you want written to the floppy at the TOS program command line dialog box." msgstr "" #. Tag: title -#: install-methods.xml:438 +#: install-methods.xml:443 #, no-c-format msgid "Writing Disk Images on Macintosh Systems" msgstr "" #. Tag: para -#: install-methods.xml:439 +#: install-methods.xml:444 #, no-c-format -msgid "There is no MacOS application to write images to floppy disks (and there would be no point in doing this as you can't use these floppies to boot the installation system or install kernel and modules from on Macintosh). However, these files are needed for the installation of the operating system and modules, later in the process." +msgid "Since the current release does not yet support booting from floppies to start the installation, there would be no point in doing this on Macintosh Systems. However, these files are needed for the installation of the operating system and modules, later in the process." msgstr "" #. Tag: title -#: install-methods.xml:457 +#: install-methods.xml:460 #, no-c-format msgid "Writing Disk Images From MacOS" msgstr "" #. Tag: para -#: install-methods.xml:458 +#: install-methods.xml:461 #, no-c-format msgid "An AppleScript, Make Debian Floppy, is available for burning floppies from the provided disk image files. It can be downloaded from . To use it, just unstuff it on your desktop, and then drag any floppy image file to it. You must have Applescript installed and enabled in your extensions manager. Disk Copy will ask you to confirm that you wish to erase the floppy and proceed to write the file image to it." msgstr "" #. Tag: para -#: install-methods.xml:469 +#: install-methods.xml:472 #, no-c-format msgid "You can also use the MacOS utility Disk Copy directly, or the freeware utility suntar. The root.bin file is an example of a floppy image. Use one of the following methods to create a floppy from the floppy image with these utilities." msgstr "" #. Tag: title -#: install-methods.xml:480 +#: install-methods.xml:483 #, no-c-format msgid "Writing Disk Images with Disk Copy" msgstr "" #. Tag: para -#: install-methods.xml:481 +#: install-methods.xml:484 #, no-c-format msgid "If you are creating the floppy image from files which were originally on the official &debian; CD, then the Type and Creator are already set correctly. The following Creator-Changer steps are only necessary if you downloaded the image files from a Debian mirror." msgstr "" #. Tag: para -#: install-methods.xml:490 +#: install-methods.xml:493 #, no-c-format msgid "Obtain Creator-Changer and use it to open the root.bin file." msgstr "" #. Tag: para -#: install-methods.xml:497 +#: install-methods.xml:500 #, no-c-format msgid "Change the Creator to ddsk (Disk Copy), and the Type to DDim (binary floppy image). The case is sensitive for these fields." msgstr "" #. Tag: para -#: install-methods.xml:504 +#: install-methods.xml:507 #, no-c-format msgid "Important: In the Finder, use Get Info to display the Finder information about the floppy image, and X the File Locked check box so that MacOS will be unable to remove the boot blocks if the image is accidentally mounted." msgstr "" #. Tag: para -#: install-methods.xml:513 +#: install-methods.xml:516 #, no-c-format msgid "Obtain Disk Copy; if you have a MacOS system or CD it will very likely be there already, otherwise try ." msgstr "" #. Tag: para -#: install-methods.xml:520 +#: install-methods.xml:523 #, no-c-format msgid "Run Disk Copy, and select Utilities Make a Floppy , then select the locked image file from the resulting dialog. It will ask you to insert a floppy, then ask if you really want to erase it. When done it should eject the floppy." msgstr "" #. Tag: title -#: install-methods.xml:535 +#: install-methods.xml:538 #, no-c-format msgid "Writing Disk Images with suntar" msgstr "" #. Tag: para -#: install-methods.xml:539 +#: install-methods.xml:542 #, no-c-format msgid "Obtain suntar from . Start the suntar program and select Overwrite Sectors... from the Special menu." msgstr "" #. Tag: para -#: install-methods.xml:547 +#: install-methods.xml:550 #, no-c-format msgid "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)." msgstr "" #. Tag: para -#: install-methods.xml:553 +#: install-methods.xml:556 #, no-c-format msgid "Select the root.bin file in the file-opening dialog." msgstr "" #. Tag: para -#: install-methods.xml:558 +#: install-methods.xml:561 #, no-c-format msgid "After the floppy has been created successfully, select File Eject . If there are any errors writing the floppy, simply toss that floppy and try another." msgstr "" #. Tag: para -#: install-methods.xml:566 +#: install-methods.xml:569 #, no-c-format msgid "Before using the floppy you created, set the write protect tab! Otherwise if you accidentally mount it in MacOS, MacOS will helpfully ruin it." msgstr "" #. Tag: title -#: install-methods.xml:585 +#: install-methods.xml:588 #, no-c-format msgid "Preparing Files for USB Memory Stick Booting" msgstr "" #. Tag: para -#: install-methods.xml:587 +#: install-methods.xml:590 #, no-c-format msgid "To prepare the USB stick, you will need a system where GNU/Linux is already running and where USB is supported. You should ensure that the usb-storage kernel module is loaded (modprobe usb-storage) and try to find out which SCSI device the USB stick has been mapped to (in this example /dev/sda is used). To write to your stick, you may have to turn off its write protection switch." msgstr "" #. Tag: para -#: install-methods.xml:597 +#: install-methods.xml:600 #, no-c-format msgid "Note that the USB stick should be at least 256 MB in size (smaller setups are possible if you follow )." msgstr "" #. Tag: title -#: install-methods.xml:605 +#: install-methods.xml:608 #, no-c-format msgid "Copying the files — the easy way" msgstr "" #. Tag: para -#: install-methods.xml:606 +#: install-methods.xml:609 #, no-c-format msgid "There is an all-in-one file hd-media/boot.img.gz which contains all the installer files (including the kernel) as well as SYSLINUX and its configuration file. You only have to extract it directly to your USB stick:" msgstr "" #. Tag: screen -#: install-methods.xml:613 +#: install-methods.xml:616 #, no-c-format msgid "# zcat boot.img.gz > /dev/sda" msgstr "" #. Tag: para -#: install-methods.xml:615 +#: install-methods.xml:618 #, no-c-format msgid "There is an all-in-one file hd-media/boot.img.gz which contains all the installer files (including the kernel) as well as yaboot and its configuration file. Create a partition of type \"Apple_Bootstrap\" on your USB stick using mac-fdisk's C command and extract the image directly to that:" msgstr "" #. Tag: screen -#: install-methods.xml:624 +#: install-methods.xml:627 #, no-c-format msgid "# zcat boot.img.gz > /dev/sda2" msgstr "" #. Tag: para -#: install-methods.xml:627 +#: install-methods.xml:630 #, no-c-format msgid "Using this method will destroy anything already on the device. Make sure that you use the correct device name for your USB stick." msgstr "" #. Tag: para -#: install-methods.xml:633 +#: install-methods.xml:636 #, no-c-format msgid "After that, mount the USB memory stick (mount /dev/sda /dev/sda2 /mnt), which will now have a FAT filesystem an HFS filesystem on it, and copy a Debian netinst or businesscard ISO image to it. Please note that the file name must end in .iso. Unmount the stick (umount /mnt) and you are done." msgstr "" #. Tag: title -#: install-methods.xml:649 +#: install-methods.xml:652 #, no-c-format msgid "Copying the files — the flexible way" msgstr "" #. Tag: para -#: install-methods.xml:650 +#: install-methods.xml:653 #, no-c-format msgid "If you like more flexibility or just want to know what's going on, you should use the following method to put the files on your stick." msgstr "" #. Tag: title -#: install-methods.xml:662 install-methods.xml:751 +#: install-methods.xml:665 install-methods.xml:754 #, no-c-format msgid "USB stick partitioning on &arch-title;" msgstr "" #. Tag: para -#: install-methods.xml:663 +#: install-methods.xml:666 #, no-c-format msgid "We will show how to setup the memory stick to use the first partition, instead of the entire device." msgstr "" #. Tag: para -#: install-methods.xml:668 +#: install-methods.xml:671 #, no-c-format msgid "" "Since most USB sticks come pre-configured with a single FAT16 partition, you probably won't have to repartition or reformat the stick. If you have to do that anyway, use cfdisk or any other partitioning tool to create a FAT16 partition, and then create the filesystem using: \n" @@ -495,13 +501,13 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:682 +#: install-methods.xml:685 #, no-c-format msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. Although any boot loader (e.g. LILO) should work, it's convenient to use SYSLINUX, since it uses a FAT16 partition and can be reconfigured by just editing a text file. Any operating system which supports the FAT file system can be used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para -#: install-methods.xml:692 +#: install-methods.xml:695 #, no-c-format msgid "" "To put SYSLINUX on the FAT16 partition on your USB stick, install the syslinux and mtools packages on your system, and do: \n" @@ -510,19 +516,19 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:705 +#: install-methods.xml:708 #, no-c-format msgid "Mount the partition (mount /dev/sda1 /mnt) and copy the following files from the Debian archives to the stick: vmlinuz (kernel binary) initrd.gz (initial ramdisk image) syslinux.cfg (SYSLINUX configuration file) Optional kernel modules If you want to rename the files, please note that SYSLINUX can only process DOS (8.3) file names." msgstr "" #. Tag: para -#: install-methods.xml:736 +#: install-methods.xml:739 #, no-c-format msgid "The syslinux.cfg configuration file should contain the following two lines:" msgstr "" #. Tag: screen -#: install-methods.xml:741 +#: install-methods.xml:744 #, no-c-format msgid "" "default vmlinuz\n" @@ -530,7 +536,7 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:752 +#: install-methods.xml:755 #, no-c-format msgid "" "Most USB sticks do not come pre-configured in such a way that Open Firmware can boot from them, so you will need to repartition the stick. On Mac systems, run mac-fdisk /dev/sda, initialise a new partition map using the i command, and create a new partition of type Apple_Bootstrap using the C command. (Note that the first \"partition\" will always be the partition map itself.) Then type \n" @@ -539,13 +545,13 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:768 +#: install-methods.xml:771 #, no-c-format msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. The yaboot boot loader can be installed on an HFS filesystem and can be reconfigured by just editing a text file. Any operating system which supports the HFS file system can be used to make changes to the configuration of the boot loader." msgstr "" #. Tag: para -#: install-methods.xml:777 +#: install-methods.xml:780 #, no-c-format msgid "" "The normal ybin tool that comes with yaboot does not yet understand USB storage devices, so you will have to install yaboot by hand using the hfsutils tools. Type \n" @@ -558,43 +564,43 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:793 +#: install-methods.xml:796 #, no-c-format msgid "Mount the partition (mount /dev/sda2 /mnt) and copy the following files from the Debian archives to the stick:" msgstr "" #. Tag: para -#: install-methods.xml:799 +#: install-methods.xml:802 #, no-c-format msgid "vmlinux (kernel binary)" msgstr "" #. Tag: para -#: install-methods.xml:804 +#: install-methods.xml:807 #, no-c-format msgid "initrd.gz (initial ramdisk image)" msgstr "" #. Tag: para -#: install-methods.xml:809 +#: install-methods.xml:812 #, no-c-format msgid "yaboot.conf (yaboot configuration file)" msgstr "" #. Tag: para -#: install-methods.xml:814 +#: install-methods.xml:817 #, no-c-format msgid "boot.msg (optional boot message)" msgstr "" #. Tag: para -#: install-methods.xml:819 +#: install-methods.xml:822 #, no-c-format msgid "Optional kernel modules" msgstr "" #. Tag: para -#: install-methods.xml:826 +#: install-methods.xml:829 #, no-c-format msgid "" "The yaboot.conf configuration file should contain the following lines: \n" @@ -612,283 +618,283 @@ msgid "" msgstr "" #. Tag: title -#: install-methods.xml:842 +#: install-methods.xml:845 #, no-c-format msgid "Adding an ISO image" msgstr "" #. Tag: para -#: install-methods.xml:843 +#: install-methods.xml:846 #, no-c-format msgid "The installer will look for a Debian ISO image on the stick as its source for additional data needed for the installation. So your next step is to copy a Debian ISO image (businesscard, netinst or even a full CD image) onto your stick (be sure to select one that fits). The file name of the image must end in .iso." msgstr "" #. Tag: para -#: install-methods.xml:851 +#: install-methods.xml:854 #, no-c-format msgid "If you want to install over the network, without using an ISO image, you will of course skip the previous step. Moreover you will have to use the initial ramdisk from the netboot directory instead of the one from hd-media, because hd-media/initrd.gz does not have network support." msgstr "" #. Tag: para -#: install-methods.xml:860 +#: install-methods.xml:863 #, no-c-format msgid "When you are done, unmount the USB memory stick (umount /mnt) and activate its write protection switch." msgstr "" #. Tag: title -#: install-methods.xml:870 +#: install-methods.xml:873 #, no-c-format msgid "Booting the USB stick" msgstr "" #. Tag: para -#: install-methods.xml:871 +#: install-methods.xml:874 #, no-c-format msgid "If your system refuses to boot from the memory stick, the stick may contain an invalid master boot record (MBR). To fix this, use the install-mbr command from the package mbr:" msgstr "" #. Tag: screen -#: install-methods.xml:878 +#: install-methods.xml:881 #, no-c-format msgid "# install-mbr /dev/sda" msgstr "" #. Tag: title -#: install-methods.xml:889 +#: install-methods.xml:892 #, no-c-format msgid "Preparing Files for Hard Disk Booting" msgstr "" #. Tag: para -#: install-methods.xml:890 +#: install-methods.xml:893 #, no-c-format msgid "The installer may be booted using boot files placed on an existing hard drive partition, either launched from another operating system or by invoking a boot loader directly from the BIOS." msgstr "" #. Tag: para -#: install-methods.xml:896 +#: install-methods.xml:899 #, no-c-format msgid "A full, pure network installation can be achieved using this technique. This avoids all hassles of removable media, like finding and burning CD images or struggling with too numerous and unreliable floppy disks." msgstr "" #. Tag: para -#: install-methods.xml:903 +#: install-methods.xml:906 #, no-c-format msgid "The installer cannot boot from files on an NTFS file system." msgstr "" #. Tag: para -#: install-methods.xml:907 +#: install-methods.xml:910 #, no-c-format msgid "The installer cannot boot from files on an HFS+ file system. MacOS System 8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To determine whether your existing file system is HFS+, select Get Info for the volume in question. HFS file systems appear as Mac OS Standard, while HFS+ file systems say Mac OS Extended. You must have an HFS partition in order to exchange files between MacOS and Linux, in particular the installation files you download." msgstr "" #. Tag: para -#: install-methods.xml:918 +#: install-methods.xml:921 #, no-c-format msgid "Different programs are used for hard disk installation system booting, depending on whether the system is a NewWorld or an OldWorld model." msgstr "" #. Tag: title -#: install-methods.xml:927 +#: install-methods.xml:930 #, no-c-format msgid "Hard disk installer booting using LILO or GRUB" msgstr "" #. Tag: para -#: install-methods.xml:929 +#: install-methods.xml:932 #, no-c-format msgid "This section explains how to add to or even replace an existing linux installation using either LILO or GRUB." msgstr "" #. Tag: para -#: install-methods.xml:935 +#: install-methods.xml:938 #, no-c-format msgid "At boot time, both bootloaders support loading in memory not only the kernel, but also a disk image. This RAM disk can be used as the root file-system by the kernel." msgstr "" #. Tag: para -#: install-methods.xml:941 +#: install-methods.xml:944 #, no-c-format msgid "Copy the following files from the Debian archives to a convenient location on your hard drive, for instance to /boot/newinstall/." msgstr "" #. Tag: para -#: install-methods.xml:948 +#: install-methods.xml:951 #, no-c-format msgid "vmlinuz (kernel binary)" msgstr "" #. Tag: para -#: install-methods.xml:953 +#: install-methods.xml:956 #, no-c-format msgid "initrd.gz (ramdisk image)" msgstr "" #. Tag: para -#: install-methods.xml:960 +#: install-methods.xml:963 #, no-c-format msgid "Finally, to configure the bootloader proceed to ." msgstr "" #. Tag: title -#: install-methods.xml:970 +#: install-methods.xml:973 #, no-c-format msgid "Hard Disk Installer Booting for OldWorld Macs" msgstr "" #. Tag: para -#: install-methods.xml:971 +#: install-methods.xml:974 #, no-c-format msgid "The boot-floppy-hfs floppy uses miBoot to launch Linux installation, but miBoot cannot easily be used for hard disk booting. BootX, launched from MacOS, supports booting from files placed on the hard disk. BootX can also be used to dual-boot MacOS and Linux after your Debian installation is complete. For the Performa 6360, it appears that quik cannot make the hard disk bootable. So BootX is required on that model." msgstr "" #. Tag: para -#: install-methods.xml:984 +#: install-methods.xml:987 #, no-c-format msgid "Download and unstuff the BootX distribution, available from , or in the dists/woody/main/disks-powerpc/current/powermac directory on Debian http/ftp mirrors and official Debian CDs. Use Stuffit Expander to extract it from its archive. Within the package, there is an empty folder called Linux Kernels. Download linux.bin and ramdisk.image.gz from the disks-powerpc/current/powermac folder, and place them in the Linux Kernels folder. Then place the Linux Kernels folder in the active System Folder." msgstr "" #. Tag: title -#: install-methods.xml:1004 +#: install-methods.xml:1007 #, no-c-format msgid "Hard Disk Installer Booting for NewWorld Macs" msgstr "" #. Tag: para -#: install-methods.xml:1005 +#: install-methods.xml:1008 #, no-c-format msgid "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as well as loading ELF binaries directly from the hard disk. These machines will boot Linux directly via yaboot, which supports loading a kernel and RAMdisk directly from an ext2 partition, as well as dual-booting with MacOS. Hard disk booting of the installer is particularly appropriate for newer machines without floppy drives. BootX is not supported and must not be used on NewWorld PowerMacs." msgstr "" #. Tag: para -#: install-methods.xml:1016 +#: install-methods.xml:1019 #, no-c-format msgid "Copy (not move) the following four files which you downloaded earlier from the Debian archives, onto the root level of your hard drive (this can be accomplished by option-dragging each file to the hard drive icon)." msgstr "" #. Tag: filename -#: install-methods.xml:1026 +#: install-methods.xml:1029 #, no-c-format msgid "vmlinux" msgstr "" #. Tag: filename -#: install-methods.xml:1031 +#: install-methods.xml:1034 #, no-c-format msgid "initrd.gz" msgstr "" #. Tag: filename -#: install-methods.xml:1036 +#: install-methods.xml:1039 #, no-c-format msgid "yaboot" msgstr "" #. Tag: filename -#: install-methods.xml:1041 +#: install-methods.xml:1044 #, no-c-format msgid "yaboot.conf" msgstr "" #. Tag: para -#: install-methods.xml:1046 +#: install-methods.xml:1049 #, no-c-format msgid "Make a note of the partition number of the MacOS partition where you place these files. If you have the MacOS pdisk program, you can use the L command to check for the partition number. You will need this partition number for the command you type at the Open Firmware prompt when you boot the installer." msgstr "" #. Tag: para -#: install-methods.xml:1054 +#: install-methods.xml:1057 #, no-c-format msgid "To boot the installer, proceed to ." msgstr "" #. Tag: title -#: install-methods.xml:1067 +#: install-methods.xml:1070 #, no-c-format msgid "Preparing Files for TFTP Net Booting" msgstr "" #. Tag: para -#: install-methods.xml:1068 +#: install-methods.xml:1071 #, no-c-format msgid "If your machine is connected to a local area network, you may be able to boot it over the network from another machine, using TFTP. If you intend to boot the installation system from another machine, the boot files will need to be placed in specific locations on that machine, and the machine configured to support booting of your specific machine." msgstr "" #. Tag: para -#: install-methods.xml:1076 +#: install-methods.xml:1079 #, no-c-format msgid "You need to setup a TFTP server, and for many machines a DHCP server, or RARP server, or BOOTP server." msgstr "" #. Tag: para -#: install-methods.xml:1083 +#: install-methods.xml:1086 #, no-c-format msgid "The Reverse Address Resolution Protocol (RARP) is one way to tell your client what IP address to use for itself. Another way is to use the BOOTP protocol. BOOTP is an IP protocol that informs a computer of its IP address and where on the network to obtain a boot image. Yet another alternative exists on VMEbus systems: the IP address can be manually configured in boot ROM. The DHCP (Dynamic Host Configuration Protocol) is a more flexible, backwards-compatible extension of BOOTP. Some systems can only be configured via DHCP." msgstr "" #. Tag: para -#: install-methods.xml:1100 +#: install-methods.xml:1103 #, no-c-format msgid "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good idea to use DHCP instead of BOOTP. Some of the latest machines are unable to boot using BOOTP." msgstr "" #. Tag: para -#: install-methods.xml:1106 +#: install-methods.xml:1109 #, no-c-format msgid "Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM console will not use RARP to obtain its IP address, and therefore you must use BOOTP for net booting your Alpha Alpha systems can also be net-booted using the DECNet MOP (Maintenance Operations Protocol), but this is not covered here. Presumably, your local OpenVMS operator will be happy to assist you should you have some burning need to use MOP to boot Linux on your Alpha. . You can also enter the IP configuration for network interfaces directly in the SRM console." msgstr "" #. Tag: para -#: install-methods.xml:1123 +#: install-methods.xml:1126 #, no-c-format msgid "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There is an rbootd package available in Debian." msgstr "" #. Tag: para -#: install-methods.xml:1128 +#: install-methods.xml:1131 #, no-c-format msgid "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to the client. Theoretically, any server, on any platform, which implements these protocols, may be used. In the examples in this section, we shall provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux." msgstr "" #. Tag: para -#: install-methods.xml:1136 +#: install-methods.xml:1139 #, no-c-format msgid "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, you will need a TFTP server with tsize support. On a &debian; server, the atftpd and tftpd-hpa packages qualify; we recommend tftpd-hpa." msgstr "" #. Tag: title -#: install-methods.xml:1154 +#: install-methods.xml:1157 #, no-c-format msgid "Setting up RARP server" msgstr "" #. Tag: para -#: install-methods.xml:1155 +#: install-methods.xml:1158 #, no-c-format msgid "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC address) of the client computers to be installed. If you don't know this information, you can pick it off the initial OpenPROM boot messages, use the OpenBoot .enet-addr command, or boot into Rescue mode (e.g., from the rescue floppy) and use the command /sbin/ifconfig eth0." msgstr "" #. Tag: para -#: install-methods.xml:1167 +#: install-methods.xml:1170 #, no-c-format msgid "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, you use the rarpd program. You need to ensure that the Ethernet hardware address for the client is listed in the ethers database (either in the /etc/ethers file, or via NIS/NIS+) and in the hosts database. Then you need to start the RARP daemon. Issue the command (as root): /usr/sbin/rarpd -a on most Linux systems and SunOS 5 (Solaris 2), /usr/sbin/in.rarpd -a on some other Linux systems, or /usr/etc/rarpd -a in SunOS 4 (Solaris 1)." msgstr "" #. Tag: title -#: install-methods.xml:1189 +#: install-methods.xml:1192 #, no-c-format msgid "Setting up a BOOTP server" msgstr "" #. Tag: para -#: install-methods.xml:1190 +#: install-methods.xml:1193 #, no-c-format msgid "There are two BOOTP servers available for GNU/Linux. The first is CMU bootpd. The other is actually a DHCP server: ISC dhcpd. In &debian; these are contained in the bootp and dhcp3-server packages respectively." msgstr "" #. Tag: para -#: install-methods.xml:1198 +#: install-methods.xml:1201 #, no-c-format msgid "" "To use CMU bootpd, you must first uncomment (or add) the relevant line in /etc/inetd.conf. On &debian;, you can run update-inetd --enable bootps, then /etc/init.d/inetd reload to do so. Just in case your BOOTP server does not run Debian, the line in question should look like: \n" @@ -905,25 +911,25 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:1231 +#: install-methods.xml:1234 #, no-c-format msgid "By contrast, setting up BOOTP with ISC dhcpd is really easy, because it treats BOOTP clients as a moderately special case of DHCP clients. Some architectures require a complex configuration for booting clients via BOOTP. If yours is one of those, read the section . In that case, you will probably be able to get away with simply adding the allow bootp directive to the configuration block for the subnet containing the client, and restart dhcpd with /etc/init.d/dhcpd3-server restart." msgstr "" #. Tag: title -#: install-methods.xml:1252 +#: install-methods.xml:1255 #, no-c-format msgid "Setting up a DHCP server" msgstr "" #. Tag: para -#: install-methods.xml:1253 +#: install-methods.xml:1256 #, no-c-format msgid "One free software DHCP server is ISC dhcpd. For &debian;, the dhcp3-server package is recommended. Here is a sample configuration file for it (see /etc/dhcp3/dhcpd.conf):" msgstr "" #. Tag: screen -#: install-methods.xml:1260 +#: install-methods.xml:1263 #, no-c-format msgid "" "option domain-name \"example.com\";\n" @@ -948,25 +954,25 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:1262 +#: install-methods.xml:1265 #, no-c-format msgid "In this example, there is one server servername which performs all of the work of DHCP server, TFTP server, and network gateway. You will almost certainly need to change the domain-name options, as well as the server name and client hardware address. The filename option should be the name of the file which will be retrieved via TFTP." msgstr "" #. Tag: para -#: install-methods.xml:1272 +#: install-methods.xml:1275 #, no-c-format msgid "After you have edited the dhcpd configuration file, restart it with /etc/init.d/dhcpd3-server restart." msgstr "" #. Tag: title -#: install-methods.xml:1280 +#: install-methods.xml:1283 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "" #. Tag: para -#: install-methods.xml:1281 +#: install-methods.xml:1284 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-boot Execution Environment (PXE) method of TFTP. \n" @@ -1001,13 +1007,13 @@ msgid "" msgstr "" #. Tag: title -#: install-methods.xml:1297 +#: install-methods.xml:1300 #, no-c-format msgid "Enabling the TFTP Server" msgstr "" #. Tag: para -#: install-methods.xml:1298 +#: install-methods.xml:1301 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that tftpd is enabled. This is usually enabled by having something like the following line in /etc/inetd.conf: \n" @@ -1016,19 +1022,19 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:1310 +#: install-methods.xml:1313 #, no-c-format msgid "Historically, TFTP servers used /tftpboot as directory to serve images from. However, &debian; packages may use other directories to comply with the Filesystem Hierarchy Standard. For example, tftpd-hpa by default uses /var/lib/tftpboot. You may have to adjust the configuration examples in this section accordingly." msgstr "" #. Tag: para -#: install-methods.xml:1320 +#: install-methods.xml:1323 #, no-c-format msgid "Look in /etc/inetd.conf and remember the directory which is used as the argument of in.tftpd The -l argument enables some versions of in.tftpd to log all requests to the system logs; this is useful for diagnosing boot errors. ; you'll need that below. If you've had to change /etc/inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run /etc/init.d/inetd reload; on other machines, find out the process ID for inetd, and run kill -HUP inetd-pid." msgstr "" #. Tag: para -#: install-methods.xml:1338 +#: install-methods.xml:1341 #, no-c-format msgid "" "If you intend to install Debian on an SGI machine and your TFTP server is a GNU/Linux box running Linux 2.4, you'll need to set the following on your server: \n" @@ -1039,85 +1045,85 @@ msgid "" msgstr "" #. Tag: title -#: install-methods.xml:1360 +#: install-methods.xml:1363 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "" #. Tag: para -#: install-methods.xml:1361 +#: install-methods.xml:1364 #, no-c-format msgid "Next, place the TFTP boot image you need, as found in , in the tftpd boot image directory. You may have to make a link from that file to the file which tftpd will use for booting a particular client. Unfortunately, the file name is determined by the TFTP client, and there are no strong standards." msgstr "" #. Tag: para -#: install-methods.xml:1370 +#: install-methods.xml:1373 #, no-c-format msgid "On NewWorld Power Macintosh machines, you will need to set up the yaboot boot loader as the TFTP boot image. Yaboot will then retrieve the kernel and RAMdisk images via TFTP itself. For net booting, use the yaboot-netboot.conf. Just rename this to yaboot.conf in the TFTP directory." msgstr "" #. Tag: para -#: install-methods.xml:1379 +#: install-methods.xml:1382 #, no-c-format msgid "For PXE booting, everything you should need is set up in the netboot/netboot.tar.gz tarball. Simply extract this tarball into the tftpd boot image directory. Make sure your dhcp server is configured to pass pxelinux.0 to tftpd as the filename to boot." msgstr "" #. Tag: para -#: install-methods.xml:1387 +#: install-methods.xml:1390 #, no-c-format msgid "For PXE booting, everything you should need is set up in the netboot/netboot.tar.gz tarball. Simply extract this tarball into the tftpd boot image directory. Make sure your dhcp server is configured to pass /debian-installer/ia64/elilo.efi to tftpd as the filename to boot." msgstr "" #. Tag: title -#: install-methods.xml:1399 +#: install-methods.xml:1402 #, no-c-format msgid "DECstation TFTP Images" msgstr "" #. Tag: para -#: install-methods.xml:1400 +#: install-methods.xml:1403 #, no-c-format msgid "For DECstations, there are tftpimage files for each subarchitecture, which contain both kernel and installer in one file. The naming convention is subarchitecture/netboot-boot.img. Copy the tftpimage file you would like to use to /tftpboot/tftpboot.img if you work with the example BOOTP/DHCP setups described above." msgstr "" #. Tag: para -#: install-methods.xml:1410 +#: install-methods.xml:1413 #, no-c-format msgid "The DECstation firmware boots by TFTP with the command boot #/tftp, where # is the number of the TurboChannel device from which to boot. On most DECstations this is 3. If the BOOTP/DHCP server does not supply the filename or you need to pass additional parameters, they can optionally be appended with the following syntax:" msgstr "" #. Tag: userinput -#: install-methods.xml:1422 +#: install-methods.xml:1425 #, no-c-format msgid "boot #/tftp/filename param1=value1 param2=value2 ..." msgstr "" #. Tag: para -#: install-methods.xml:1424 +#: install-methods.xml:1427 #, no-c-format msgid "Several DECstation firmware revisions show a problem with regard to net booting: the transfer starts, but after some time it stops with an a.out err. This can have several reasons: The firmware does not respond to ARP requests during a TFTP transfer. This leads to an ARP timeout and the transfer stops. The solution is to add the MAC address of the Ethernet card in the DECstation statically to the ARP table of the TFTP server. This is done by running arp -s IP-address MAC-address as root on the machine acting as TFTP server. The MAC-address of the DECstation can be read out by entering cnfg at the DECstation firmware prompt. The firmware has a size limit on the files that can be booted by TFTP. There are also firmware revisions that cannot boot via TFTP at all. An overview about the different firmware revisions can be found at the NetBSD web pages: ." msgstr "" #. Tag: title -#: install-methods.xml:1462 +#: install-methods.xml:1465 #, no-c-format msgid "Alpha TFTP Booting" msgstr "" #. Tag: para -#: install-methods.xml:1463 +#: install-methods.xml:1466 #, no-c-format msgid "On Alpha, you must specify the filename (as a relative path to the boot image directory) using the -file argument to the SRM boot command, or by setting the BOOT_FILE environment variable. Alternatively, the filename can be given via BOOTP (in ISC dhcpd, use the filename directive). Unlike Open Firmware, there is no default filename on SRM, so you must specify a filename by either one of these methods." msgstr "" #. Tag: title -#: install-methods.xml:1478 +#: install-methods.xml:1481 #, no-c-format msgid "SPARC TFTP Booting" msgstr "" #. Tag: para -#: install-methods.xml:1479 +#: install-methods.xml:1482 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as SUN4M or SUN4C, to the filename. Thus, if your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename would be C0A80103.SUN4C. However, there are also subarchitectures where the file the client looks for is just client-ip-in-hex. An easy way to determine the hexadecimal code for the IP address is to enter the following command in a shell (assuming the machine's intended IP is 10.0.0.4). \n" @@ -1126,85 +1132,85 @@ msgid "" msgstr "" #. Tag: para -#: install-methods.xml:1495 +#: install-methods.xml:1498 #, no-c-format msgid "If you've done all this correctly, giving the command boot net from the OpenPROM should load the image. If the image cannot be found, try checking the logs on your tftp server to see which image name is being requested." msgstr "" #. Tag: para -#: install-methods.xml:1502 +#: install-methods.xml:1505 #, no-c-format msgid "You can also force some sparc systems to look for a specific file name by adding it to the end of the OpenPROM boot command, such as boot net my-sparc.image. This must still reside in the directory that the TFTP server looks in." msgstr "" #. Tag: title -#: install-methods.xml:1513 +#: install-methods.xml:1516 #, no-c-format msgid "BVM/Motorola TFTP Booting" msgstr "" #. Tag: para -#: install-methods.xml:1514 +#: install-methods.xml:1517 #, no-c-format msgid "For BVM and Motorola VMEbus systems copy the files &bvme6000-tftp-files; to /tftpboot/." msgstr "" #. Tag: para -#: install-methods.xml:1519 +#: install-methods.xml:1522 #, no-c-format msgid "Next, configure your boot ROMs or BOOTP server to initially load the tftplilo.bvme or tftplilo.mvme files from the TFTP server. Refer to the tftplilo.txt file for your subarchitecture for additional system-specific configuration information." msgstr "" #. Tag: title -#: install-methods.xml:1531 +#: install-methods.xml:1534 #, no-c-format msgid "SGI TFTP Booting" msgstr "" #. Tag: para -#: install-methods.xml:1532 +#: install-methods.xml:1535 #, no-c-format msgid "On SGI machines you can rely on the bootpd to supply the name of the TFTP file. It is given either as the bf= in /etc/bootptab or as the filename= option in /etc/dhcpd.conf." msgstr "" #. Tag: title -#: install-methods.xml:1544 +#: install-methods.xml:1547 #, no-c-format msgid "Broadcom BCM91250A and BCM91480B TFTP Booting" msgstr "" #. Tag: para -#: install-methods.xml:1545 +#: install-methods.xml:1548 #, no-c-format msgid "You don't have to configure DHCP in a special way because you'll pass the full path of the file to be loaded to CFE." msgstr "" #. Tag: title -#: install-methods.xml:1650 +#: install-methods.xml:1653 #, no-c-format msgid "Automatic Installation" msgstr "" #. Tag: para -#: install-methods.xml:1651 +#: install-methods.xml:1654 #, no-c-format msgid "For installing on multiple computers it's possible to do fully automatic installations. Debian packages intended for this include fai (which uses an install server), replicator, systemimager, autoinstall, and the Debian Installer itself." msgstr "" #. Tag: title -#: install-methods.xml:1664 +#: install-methods.xml:1667 #, no-c-format msgid "Automatic Installation Using the Debian Installer" msgstr "" #. Tag: para -#: install-methods.xml:1665 +#: install-methods.xml:1668 #, no-c-format msgid "The Debian Installer supports automating installs via preconfiguration files. A preconfiguration file can be loaded from the network or from removable media, and used to fill in answers to questions asked during the installation process." msgstr "" #. Tag: para -#: install-methods.xml:1672 +#: install-methods.xml:1675 #, no-c-format msgid "Full documentation on preseeding including a working example that you can edit is in ." msgstr "" -- cgit v1.2.3