From 2d5cb2b72b12f78d9775f4115c1ff1ae0c0a747c Mon Sep 17 00:00:00 2001 From: Felipe Augusto van de Wiel Date: Sun, 5 Oct 2008 00:08:06 +0000 Subject: [SILENT_COMMIT] Update of POT and PO files for the manual --- po/pot/using-d-i.pot | 750 +++++++++++++++++++++++++++++---------------------- 1 file changed, 426 insertions(+), 324 deletions(-) (limited to 'po/pot/using-d-i.pot') diff --git a/po/pot/using-d-i.pot b/po/pot/using-d-i.pot index e4ec37ae4..798ac9a6f 100644 --- a/po/pot/using-d-i.pot +++ b/po/pot/using-d-i.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2008-09-28 00:09+0000\n" +"POT-Creation-Date: 2008-10-05 00:05+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -458,254 +458,260 @@ msgstr "" msgid "You will notice that &d-i; performs hardware detection several times during this stage. The first time is targeted specifically at the hardware needed to load installer components (e.g. your CD-ROM or network card). As not all drivers may be available during this first run, hardware detection needs to be repeated later in the process." msgstr "" +#. Tag: para +#: using-d-i.xml:429 +#, no-c-format +msgid "During hardware detection &d-i; checks if any of the drivers for the hardware devices in your system require firmware to be loaded. If any firmware is requested but unavailable, a dialog will be displayed that allows the missing firmware to be loaded from a removable medium. See for further details." +msgstr "" + #. Tag: title -#: using-d-i.xml:436 +#: using-d-i.xml:444 #, no-c-format msgid "Check available memory / low memory mode" msgstr "" #. Tag: para -#: using-d-i.xml:438 +#: using-d-i.xml:446 #, no-c-format msgid "One of the first things &d-i; does, is to check available memory. If the available memory is limited, this component will make some changes in the installation process which hopefully will allow you to install &debian; on your system." msgstr "" #. Tag: para -#: using-d-i.xml:445 +#: using-d-i.xml:453 #, no-c-format msgid "The first measure taken to reduce memory consumption by the installer is to disable translations, which means that the installation can only be done in English. Of course, you can still localize the installed system after the installation has completed." msgstr "" #. Tag: para -#: using-d-i.xml:452 +#: using-d-i.xml:460 #, no-c-format msgid "If that is not sufficient, the installer will further reduce memory consumption by loading only those components essential to complete a basic installation. This reduces the functionality of the installation system. You will be given the opportunity to load additional components manually, but you should be aware that each component you select will use additional memory and thus may cause the installation to fail." msgstr "" #. Tag: para -#: using-d-i.xml:461 +#: using-d-i.xml:469 #, no-c-format msgid "If the installer runs in low memory mode, it is recommended to create a relatively large swap partition (64–128MB). The swap partition will be used as virtual memory and thus increases the amount of memory available to the system. The installer will activate the swap partition as early as possible in the installation process. Note that heavy use of swap will reduce performance of your system and may lead to high disk activity." msgstr "" #. Tag: para -#: using-d-i.xml:471 +#: using-d-i.xml:479 #, no-c-format msgid "Despite these measures, it is still possible that your system freezes, that unexpected errors occur or that processes are killed by the kernel because the system runs out of memory (which will result in Out of memory messages on VT4 and in the syslog)." msgstr "" #. Tag: para -#: using-d-i.xml:478 +#: using-d-i.xml:486 #, no-c-format msgid "For example, it has been reported that creating a big ext3 file system fails in low memory mode when there is insufficient swap space. If a larger swap doesn't help, try creating the file system as ext2 (which is an essential component of the installer) instead. It is possible to change an ext2 partition to ext3 after the installation." msgstr "" #. Tag: para -#: using-d-i.xml:486 +#: using-d-i.xml:494 #, no-c-format msgid "It is possible to force the installer to use a higher lowmem level than the one based on available memory by using the boot parameter lowmem as described in ." msgstr "" #. Tag: title -#: using-d-i.xml:501 +#: using-d-i.xml:509 #, no-c-format msgid "Selecting Localization Options" msgstr "" #. Tag: para -#: using-d-i.xml:503 +#: using-d-i.xml:511 #, no-c-format msgid "In most cases the first questions you will be asked concern the selection of localization options to be used both for the installation and for the installed system. The localization options consist of language, country and locales." msgstr "" #. Tag: para -#: using-d-i.xml:510 +#: using-d-i.xml:518 #, no-c-format msgid "The language you choose will be used for the rest of the installation process, provided a translation of the different dialogs is available. If no valid translation is available for the selected language, the installer will default to English." msgstr "" #. Tag: para -#: using-d-i.xml:517 +#: using-d-i.xml:525 #, no-c-format msgid "The selected country will be used later in the installation process to pick the default timezone and a Debian mirror appropriate for your geographic location. Language and country together will be used to set the default locale for your system and to help select your keyboard." msgstr "" #. Tag: para -#: using-d-i.xml:524 +#: using-d-i.xml:532 #, no-c-format msgid "You will first be asked to select your preferred language. The language names are listed in both English (left side) and in the language itself (right side); the names on the right side are also shown in the proper script for the language. The list is sorted on the English names. At the top of the list is an extra option that allows you to select the C locale instead of a language. Choosing the C locale will result in the installation proceding in English; the installed system will have no localization support as the locales package will not be installed." msgstr "" #. Tag: para -#: using-d-i.xml:536 +#: using-d-i.xml:544 #, no-c-format msgid "If you selected a language that is recognized as an official language for more than one country In technical terms: where multiple locales exist for that language with differing country codes. , you will be shown a list of only those countries. To select a country that is not in that list, choose Other (the last option). You will then be presented with a list of continents; selecting a continent will lead to a list of relevant countries on that continent." msgstr "" #. Tag: para -#: using-d-i.xml:554 +#: using-d-i.xml:562 #, no-c-format msgid "If the language has only one country associated with it, that country will be selected automatically. In that case it is only possible to select a different country by first lowering the debconf priority to medium, followed by revisiting the language selection option in the main menu of the installer." msgstr "" #. Tag: para -#: using-d-i.xml:562 +#: using-d-i.xml:570 #, no-c-format msgid "A default locale will be selected based on the selected language and country. If you are installing at medium or low priority, you will have the option of selecting a different default locale and of selecting additional locales to be generated for the installed system." msgstr "" #. Tag: title -#: using-d-i.xml:577 +#: using-d-i.xml:585 #, no-c-format msgid "Choosing a Keyboard" msgstr "" #. Tag: para -#: using-d-i.xml:579 +#: using-d-i.xml:587 #, no-c-format msgid "Keyboards are often tailored to the characters used in a language. Select a layout that conforms to the keyboard you are using, or select something close if the keyboard layout you want isn't represented. Once the system installation is complete, you'll be able to select a keyboard layout from a wider range of choices (run kbdconfig as root after you have completed the installation)." msgstr "" #. Tag: para -#: using-d-i.xml:589 +#: using-d-i.xml:597 #, no-c-format msgid "Move the highlight to the keyboard selection you desire and press &enterkey;. Use the arrow keys to move the highlight — they are in the same place in all national language keyboard layouts, so they are independent of the keyboard configuration. An 'extended' keyboard is one with F1 through F10 keys along the top row." msgstr "" #. Tag: para -#: using-d-i.xml:598 +#: using-d-i.xml:606 #, no-c-format msgid "There are two keyboard layouts for US keyboards; the qwerty/mac-usb-us (Apple USB) layout will place the Alt function on the Command/Apple key (in the keyboard position next to the space key similar to Alt on PC keyboards), while the qwerty/us (Standard) layout will place the Alt function on the Option key (engraved with 'alt' on most Mac keyboards). In other respects the two layouts are similar." msgstr "" #. Tag: title -#: using-d-i.xml:628 +#: using-d-i.xml:636 #, no-c-format msgid "Looking for the Debian Installer ISO Image" msgstr "" #. Tag: para -#: using-d-i.xml:629 +#: using-d-i.xml:637 #, no-c-format msgid "When installing via the hd-media method, there will be a moment where you need to find and mount the Debian Installer iso image in order to get the rest of the installation files. The component iso-scan does exactly this." msgstr "" #. Tag: para -#: using-d-i.xml:636 +#: using-d-i.xml:644 #, no-c-format msgid "At first, iso-scan automatically mounts all block devices (e.g. partitions) which have some known filesystem on them and sequentially searches for filenames ending with .iso (or .ISO for that matter). Beware that the first attempt scans only files in the root directory and in the first level of subdirectories (i.e. it finds /whatever.iso, /data/whatever.iso, but not /data/tmp/whatever.iso). After an iso image has been found, iso-scan checks its content to determine if the image is a valid Debian iso image or not. In the former case we are done, in the latter iso-scan seeks for another image." msgstr "" #. Tag: para -#: using-d-i.xml:653 +#: using-d-i.xml:661 #, no-c-format msgid "In case the previous attempt to find an installer iso image fails, iso-scan will ask you whether you would like to perform a more thorough search. This pass doesn't just look into the topmost directories, but really traverses whole filesystem." msgstr "" #. Tag: para -#: using-d-i.xml:660 +#: using-d-i.xml:668 #, no-c-format msgid "If iso-scan does not discover your installer iso image, reboot back to your original operating system and check if the image is named correctly (ending in .iso), if it is placed on a filesystem recognizable by &d-i;, and if it is not corrupted (verify the checksum). Experienced Unix users could do this without rebooting on the second console." msgstr "" #. Tag: title -#: using-d-i.xml:681 +#: using-d-i.xml:689 #, no-c-format msgid "Configuring the Network" msgstr "" #. Tag: para -#: using-d-i.xml:683 +#: using-d-i.xml:691 #, no-c-format msgid "As you enter this step, if the system detects that you have more than one network device, you'll be asked to choose which device will be your primary network interface, i.e. the one which you want to use for installation. The other interfaces won't be configured at this time. You may configure additional interfaces after installation is complete; see the interfaces 5 man page." msgstr "" #. Tag: para -#: using-d-i.xml:694 +#: using-d-i.xml:702 #, no-c-format msgid "By default, &d-i; tries to configure your computer's network automatically via DHCP. If the DHCP probe succeeds, you are done. If the probe fails, it may be caused by many factors ranging from unplugged network cable, to a misconfigured DHCP setup. Or maybe you don't have a DHCP server in your local network at all. For further explanation, check the error messages on the fourth console. In any case, you will be asked if you want to retry, or if you want to perform a manual setup. DHCP servers are sometimes really slow in their responses, so if you are sure everything is in place, try again." msgstr "" #. Tag: para -#: using-d-i.xml:706 +#: using-d-i.xml:714 #, no-c-format msgid "The manual network setup in turn asks you a number of questions about your network, notably IP address, Netmask, Gateway, Name server addresses, and a Hostname. Moreover, if you have a wireless network interface, you will be asked to provide your Wireless ESSID and a WEP key. Fill in the answers from ." msgstr "" #. Tag: para -#: using-d-i.xml:720 +#: using-d-i.xml:728 #, no-c-format msgid "Some technical details you might, or might not, find handy: the program assumes the network IP address is the bitwise-AND of your system's IP address and your netmask. The default broadcast address is calculated as the bitwise OR of your system's IP address with the bitwise negation of the netmask. It will also guess your gateway. If you can't find any of these answers, use the offered defaults — if necessary, you can change them by editing /etc/network/interfaces once the system has been installed." msgstr "" #. Tag: title -#: using-d-i.xml:765 +#: using-d-i.xml:773 #, no-c-format msgid "Configuring the Clock" msgstr "" #. Tag: para -#: using-d-i.xml:767 +#: using-d-i.xml:775 #, no-c-format msgid "The installer will first attempt to connect to a time server on the Internet (using the NTP protocol) in order to correctly set the system time. If this does not succeed, the installer will assume the time and date obtained from the system clock when the installation system was booted are correct. It is not possible to manually set the system time during the installation process." msgstr "" #. Tag: para -#: using-d-i.xml:785 +#: using-d-i.xml:793 #, no-c-format msgid "Depending on the location selected earlier in the installation process, you may be shown a list of timezones relevant for that location. If your location has only one time zone, you will not be asked anything and the system will assume that time zone." msgstr "" #. Tag: para -#: using-d-i.xml:792 +#: using-d-i.xml:800 #, no-c-format msgid "If for some reason you wish to set a time zone for the installed system that does not match the selected location, there are two options." msgstr "" #. Tag: para -#: using-d-i.xml:803 +#: using-d-i.xml:811 #, no-c-format msgid "The simplest option is to just select a different timezone after the installation has been completed and you've booted into the new system. The command to do this is:" msgstr "" #. Tag: screen -#: using-d-i.xml:809 +#: using-d-i.xml:817 #, no-c-format msgid "# dpkg-reconfigure tzdata" msgstr "" #. Tag: para -#: using-d-i.xml:815 +#: using-d-i.xml:823 #, no-c-format msgid "Alternatively, the time zone can be set at the very start of the installation by passing the parameter time/zone=value when you boot the installation system. The value should of course be a valid time zone, for example Europe/London or UTC." msgstr "" #. Tag: para -#: using-d-i.xml:829 +#: using-d-i.xml:837 #, no-c-format msgid "For automated installations the time zone can also be set using preseeding." msgstr "" #. Tag: title -#: using-d-i.xml:842 +#: using-d-i.xml:850 #, no-c-format msgid "Partitioning and Mount Point Selection" msgstr "" #. Tag: para -#: using-d-i.xml:843 +#: using-d-i.xml:851 #, no-c-format msgid "At this time, after hardware detection has been executed a final time, &d-i; should be at its full strength, customized for the user's needs and ready to do some real work. As the title of this section indicates, the main task of the next few components lies in partitioning your disks, creating filesystems, assigning mountpoints and optionally configuring closely related options like RAID, LVM or encrypted devices." msgstr "" #. Tag: para -#: using-d-i.xml:864 +#: using-d-i.xml:872 #, no-c-format msgid "If you are uncomfortable with partitioning, or just want to know more details, see ." msgstr "" #. Tag: para -#: using-d-i.xml:870 +#: using-d-i.xml:878 #, no-c-format msgid "" "If a hard disk has previously used under Solaris, the partitioner may not detect the size of the drive correctly. Creating a new partition table does not fix this issue. What does help, is to zero the first few sectors of the drive: \n" @@ -714,163 +720,163 @@ msgid "" msgstr "" #. Tag: para -#: using-d-i.xml:883 +#: using-d-i.xml:891 #, no-c-format msgid "First you will be given the opportunity to automatically partition either an entire drive, or available free space on a drive. This is also called guided partitioning. If you do not want to autopartition, choose Manual from the menu." msgstr "" #. Tag: title -#: using-d-i.xml:893 +#: using-d-i.xml:901 #, no-c-format msgid "Guided Partitioning" msgstr "" #. Tag: para -#: using-d-i.xml:894 +#: using-d-i.xml:902 #, no-c-format msgid "If you choose guided partitioning, you may have three options: to create partitions directly on the hard disk (classic method), or to create them using Logical Volume Management (LVM), or to create them using encrypted LVM The installer will encrypt the LVM volume group using a 256 bit AES key and makes use of the kernel's dm-crypt support. ." msgstr "" #. Tag: para -#: using-d-i.xml:909 +#: using-d-i.xml:917 #, no-c-format msgid "The option to use (encrypted) LVM may not be available on all architectures." msgstr "" #. Tag: para -#: using-d-i.xml:914 +#: using-d-i.xml:922 #, no-c-format msgid "When using LVM or encrypted LVM, the installer will create most partitions inside one big partition; the advantage of this method is that partitions inside this big partition can be resized relatively easily later. In the case of encrypted LVM the big partition will not be readable without knowing a special key phrase, thus providing extra security of your (personal) data." msgstr "" #. Tag: para -#: using-d-i.xml:923 +#: using-d-i.xml:931 #, no-c-format msgid "When using encrypted LVM, the installer will also automatically erase the disk by writing random data to it. This further improves security (as it makes it impossible to tell which parts of the disk are in use and also makes sure that any traces of previous installations are erased), but may take some time depending on the size of your disk." msgstr "" #. Tag: para -#: using-d-i.xml:932 +#: using-d-i.xml:940 #, no-c-format msgid "If you choose guided partitioning using LVM or encrypted LVM, some changes in the partition table will need to be written to the selected disk while LVM is being set up. These changes effectively erase all data that is currently on the selected hard disk and you will not be able to undo them later. However, the installer will ask you to confirm these changes before they are written to disk." msgstr "" #. Tag: para -#: using-d-i.xml:942 +#: using-d-i.xml:950 #, no-c-format msgid "If you choose guided partitioning (either classic or using (encrypted) LVM) for a whole disk, you will first be asked to select the disk you want to use. Check that all your disks are listed and, if you have several disks, make sure you select the correct one. The order they are listed in may differ from what you are used to. The size of the disks may help to identify them." msgstr "" #. Tag: para -#: using-d-i.xml:951 +#: using-d-i.xml:959 #, no-c-format msgid "Any data on the disk you select will eventually be lost, but you will always be asked to confirm any changes before they are written to the disk. If you have selected the classic method of partitioning, you will be able to undo any changes right until the end; when using (encrypted) LVM this is not possible." msgstr "" #. Tag: para -#: using-d-i.xml:959 +#: using-d-i.xml:967 #, no-c-format msgid "Next, you will be able to choose from the schemes listed in the table below. All schemes have their pros and cons, some of which are discussed in . If you are unsure, choose the first one. Bear in mind that guided partitioning needs a certain minimal amount of free space to operate with. If you don't give it at least about 1GB of space (depends on chosen scheme), guided partitioning will fail." msgstr "" #. Tag: entry -#: using-d-i.xml:975 +#: using-d-i.xml:983 #, no-c-format msgid "Partitioning scheme" msgstr "" #. Tag: entry -#: using-d-i.xml:976 +#: using-d-i.xml:984 #, no-c-format msgid "Minimum space" msgstr "" #. Tag: entry -#: using-d-i.xml:977 +#: using-d-i.xml:985 #, no-c-format msgid "Created partitions" msgstr "" #. Tag: entry -#: using-d-i.xml:983 +#: using-d-i.xml:991 #, no-c-format msgid "All files in one partition" msgstr "" #. Tag: entry -#: using-d-i.xml:984 +#: using-d-i.xml:992 #, no-c-format msgid "600MB" msgstr "" #. Tag: entry -#: using-d-i.xml:985 +#: using-d-i.xml:993 #, no-c-format msgid "/, swap" msgstr "" #. Tag: entry -#: using-d-i.xml:987 +#: using-d-i.xml:995 #, no-c-format msgid "Separate /home partition" msgstr "" #. Tag: entry -#: using-d-i.xml:988 +#: using-d-i.xml:996 #, no-c-format msgid "500MB" msgstr "" #. Tag: entry -#: using-d-i.xml:989 +#: using-d-i.xml:997 #, no-c-format msgid "/, /home, swap" msgstr "" #. Tag: entry -#: using-d-i.xml:993 +#: using-d-i.xml:1001 #, no-c-format msgid "Separate /home, /usr, /var and /tmp partitions" msgstr "" #. Tag: entry -#: using-d-i.xml:994 +#: using-d-i.xml:1002 #, no-c-format msgid "1GB" msgstr "" #. Tag: entry -#: using-d-i.xml:995 +#: using-d-i.xml:1003 #, no-c-format msgid "/, /home, /usr, /var, /tmp, swap" msgstr "" #. Tag: para -#: using-d-i.xml:1004 +#: using-d-i.xml:1012 #, no-c-format msgid "If you choose guided partitioning using (encrypted) LVM, the installer will also create a separate /boot partition. The other partitions, including the swap partition, will be created inside the LVM partition." msgstr "" #. Tag: para -#: using-d-i.xml:1010 +#: using-d-i.xml:1018 #, no-c-format msgid "If you choose guided partitioning for your IA-64 system, there will be an additional partition, formatted as a FAT16 bootable filesystem, for the EFI boot loader. There is also an additional menu item in the formatting menu to manually set up a partition as an EFI boot partition." msgstr "" #. Tag: para -#: using-d-i.xml:1018 +#: using-d-i.xml:1026 #, no-c-format msgid "If you choose guided partitioning for your Alpha system, an additional, unformatted partition will be allocated at the beginning of your disk to reserve this space for the aboot boot loader." msgstr "" #. Tag: para -#: using-d-i.xml:1024 +#: using-d-i.xml:1032 #, no-c-format msgid "After selecting a scheme, the next screen will show your new partition table, including information on whether and how partitions will be formatted and where they will be mounted." msgstr "" #. Tag: para -#: using-d-i.xml:1030 +#: using-d-i.xml:1038 #, no-c-format msgid "" "The list of partitions might look like this: \n" @@ -893,601 +899,601 @@ msgid "" msgstr "" #. Tag: para -#: using-d-i.xml:1043 +#: using-d-i.xml:1051 #, no-c-format msgid "This concludes the guided partitioning. If you are satisfied with the generated partition table, you can choose Finish partitioning and write changes to disk from the menu to implement the new partition table (as described at the end of this section). If you are not happy, you can choose to Undo changes to partitions and run guided partitioning again, or modify the proposed changes as described below for manual partitioning." msgstr "" #. Tag: title -#: using-d-i.xml:1057 +#: using-d-i.xml:1065 #, no-c-format msgid "Manual Partitioning" msgstr "" #. Tag: para -#: using-d-i.xml:1058 +#: using-d-i.xml:1066 #, no-c-format msgid "A similar screen to the one shown just above will be displayed if you choose manual partitioning except that your existing partition table will be shown and without the mount points. How to manually setup your partition table and the usage of partitions by your new Debian system will be covered in the remainder of this section." msgstr "" #. Tag: para -#: using-d-i.xml:1066 +#: using-d-i.xml:1074 #, no-c-format msgid "If you select a pristine disk which has neither partitions nor free space on it, you will be asked if a new partition table should be created (this is needed so you can create new partitions). After this, a new line entitled FREE SPACE should appear in the table under the selected disk." msgstr "" #. Tag: para -#: using-d-i.xml:1074 +#: using-d-i.xml:1082 #, no-c-format msgid "If you select some free space, you will have the opportunity to create a new partition. You will have to answer a quick series of questions about its size, type (primary or logical), and location (beginning or end of the free space). After this, you will be presented with a detailed overview of your new partition. The main setting is Use as:, which determines if the partition will have a file system on it, or be used for swap, software RAID, LVM, an encrypted file system, or not be used at all. Other settings include mountpoint, mount options, and bootable flag; which settings are shown depends on how the partition is to be used. If you don't like the preselected defaults, feel free to change them to your liking. E.g. by selecting the option Use as:, you can choose a different filesystem for this partition, including options to use the partition for swap, software RAID, LVM, or not use it at all. Another nice feature is the ability to copy data from an existing partition onto this one. When you are satisfied with your new partition, select Done setting up the partition and you will return to partman's main screen." msgstr "" #. Tag: para -#: using-d-i.xml:1096 +#: using-d-i.xml:1104 #, no-c-format msgid "If you decide you want to change something about your partition, simply select the partition, which will bring you to the partition configuration menu. This is the same screen as is used when creating a new partition, so you can change the same settings. One thing that may not be very obvious at a first glance is that you can resize the partition by selecting the item displaying the size of the partition. Filesystems known to work are at least fat16, fat32, ext2, ext3 and swap. This menu also allows you to delete a partition." msgstr "" #. Tag: para -#: using-d-i.xml:1107 +#: using-d-i.xml:1115 #, no-c-format msgid "Be sure to create at least two partitions: one for the root filesystem (which must be mounted as /) and one for swap. If you forget to mount the root filesystem, partman won't let you continue until you correct this issue." msgstr "" #. Tag: para -#: using-d-i.xml:1115 +#: using-d-i.xml:1123 #, no-c-format msgid "If you forget to select and format an EFI boot partition, partman will detect this and will not let you continue until you allocate one." msgstr "" #. Tag: para -#: using-d-i.xml:1121 +#: using-d-i.xml:1129 #, no-c-format msgid "Capabilities of partman can be extended with installer modules, but are dependent on your system's architecture. So if you can't see all promised goodies, check if you have loaded all required modules (e.g. partman-ext3, partman-xfs, or partman-lvm)." msgstr "" #. Tag: para -#: using-d-i.xml:1129 +#: using-d-i.xml:1137 #, no-c-format msgid "After you are satisfied with partitioning, select Finish partitioning and write changes to disk from the partitioning menu. You will be presented with a summary of changes made to the disks and asked to confirm that the filesystems should be created as requested." msgstr "" #. Tag: title -#: using-d-i.xml:1157 +#: using-d-i.xml:1165 #, no-c-format msgid "Configuring Multidisk Devices (Software RAID)" msgstr "" #. Tag: para -#: using-d-i.xml:1158 +#: using-d-i.xml:1166 #, no-c-format msgid "If you have more than one harddrive To be honest, you can construct MD device even from partitions residing on single physical drive, but that won't bring you anything useful. in your computer, you can use mdcfg to setup your drives for increased performance and/or better reliability of your data. The result is called Multidisk Device (or after its most famous variant software RAID)." msgstr "" #. Tag: para -#: using-d-i.xml:1172 +#: using-d-i.xml:1180 #, no-c-format msgid "MD is basically a bunch of partitions located on different disks and combined together to form a logical device. This device can then be used like an ordinary partition (i.e. in partman you can format it, assign a mountpoint, etc.)." msgstr "" #. Tag: para -#: using-d-i.xml:1180 +#: using-d-i.xml:1188 #, no-c-format msgid "What benefits this brings depends on the type of MD device you are creating. Currently supported are: RAID0 Is mainly aimed at performance. RAID0 splits all incoming data into stripes and distributes them equally over each disk in the array. This can increase the speed of read/write operations, but when one of the disks fails, you will lose everything (part of the information is still on the healthy disk(s), the other part was on the failed disk). The typical use for RAID0 is a partition for video editing. RAID1 Is suitable for setups where reliability is the first concern. It consists of several (usually two) equally-sized partitions where every partition contains exactly the same data. This essentially means three things. First, if one of your disks fails, you still have the data mirrored on the remaining disks. Second, you can use only a fraction of the available capacity (more precisely, it is the size of the smallest partition in the RAID). Third, file-reads are load-balanced among the disks, which can improve performance on a server, such as a file server, that tends to be loaded with more disk reads than writes. Optionally you can have a spare disk in the array which will take the place of the failed disk in the case of failure. RAID5 Is a good compromise between speed, reliability and data redundancy. RAID5 splits all incoming data into stripes and distributes them equally on all but one disk (similar to RAID0). Unlike RAID0, RAID5 also computes parity information, which gets written on the remaining disk. The parity disk is not static (that would be called RAID4), but is changing periodically, so the parity information is distributed equally on all disks. When one of the disks fails, the missing part of information can be computed from remaining data and its parity. RAID5 must consist of at least three active partitions. Optionally you can have a spare disk in the array which will take the place of the failed disk in the case of failure. As you can see, RAID5 has a similar degree of reliability to RAID1 while achieving less redundancy. On the other hand, it might be a bit slower on write operations than RAID0 due to computation of parity information. RAID6 Is similar to RAID5 except that it uses two parity devices instead of one. A RAID6 array can survive up to two disk failures. RAID10 RAID10 combines striping (as in RAID0) and mirroring (as in RAID1). It creates n copies of incoming data and distributes them across the partitions so that none of the copies of the same data are on the same device. The default value of n is 2, but it can be set to something else in expert mode. The number of partitions used must be at least n. RAID10 has different layouts for distributing the copies. The default is near copies. Near copies have all of the copies at about the same offset on all of the disks. Far copies have the copies at different offsets on the disks. Offset copies copy the stripe, not the individual copies. RAID10 can be used to achieve reliability and redundancy without the drawback of having to calculate parity. To sum it up:" msgstr "" #. Tag: entry -#: using-d-i.xml:1294 +#: using-d-i.xml:1302 #, no-c-format msgid "Type" msgstr "" #. Tag: entry -#: using-d-i.xml:1295 +#: using-d-i.xml:1303 #, no-c-format msgid "Minimum Devices" msgstr "" #. Tag: entry -#: using-d-i.xml:1296 +#: using-d-i.xml:1304 #, no-c-format msgid "Spare Device" msgstr "" #. Tag: entry -#: using-d-i.xml:1297 +#: using-d-i.xml:1305 #, no-c-format msgid "Survives disk failure?" msgstr "" #. Tag: entry -#: using-d-i.xml:1298 +#: using-d-i.xml:1306 #, no-c-format msgid "Available Space" msgstr "" #. Tag: entry -#: using-d-i.xml:1304 +#: using-d-i.xml:1312 #, no-c-format msgid "RAID0" msgstr "" #. Tag: entry -#: using-d-i.xml:1305 using-d-i.xml:1313 using-d-i.xml:1343 +#: using-d-i.xml:1313 using-d-i.xml:1321 using-d-i.xml:1351 #, no-c-format msgid "2" msgstr "" #. Tag: entry -#: using-d-i.xml:1306 using-d-i.xml:1307 +#: using-d-i.xml:1314 using-d-i.xml:1315 #, no-c-format msgid "no" msgstr "" #. Tag: entry -#: using-d-i.xml:1308 +#: using-d-i.xml:1316 #, no-c-format msgid "Size of the smallest partition multiplied by number of devices in RAID" msgstr "" #. Tag: entry -#: using-d-i.xml:1312 +#: using-d-i.xml:1320 #, no-c-format msgid "RAID1" msgstr "" #. Tag: entry -#: using-d-i.xml:1314 using-d-i.xml:1322 using-d-i.xml:1333 using-d-i.xml:1344 +#: using-d-i.xml:1322 using-d-i.xml:1330 using-d-i.xml:1341 using-d-i.xml:1352 #, no-c-format msgid "optional" msgstr "" #. Tag: entry -#: using-d-i.xml:1315 using-d-i.xml:1323 using-d-i.xml:1334 using-d-i.xml:1345 +#: using-d-i.xml:1323 using-d-i.xml:1331 using-d-i.xml:1342 using-d-i.xml:1353 #, no-c-format msgid "yes" msgstr "" #. Tag: entry -#: using-d-i.xml:1316 +#: using-d-i.xml:1324 #, no-c-format msgid "Size of the smallest partition in RAID" msgstr "" #. Tag: entry -#: using-d-i.xml:1320 +#: using-d-i.xml:1328 #, no-c-format msgid "RAID5" msgstr "" #. Tag: entry -#: using-d-i.xml:1321 +#: using-d-i.xml:1329 #, no-c-format msgid "3" msgstr "" #. Tag: entry -#: using-d-i.xml:1324 +#: using-d-i.xml:1332 #, no-c-format msgid "Size of the smallest partition multiplied by (number of devices in RAID minus one)" msgstr "" #. Tag: entry -#: using-d-i.xml:1331 +#: using-d-i.xml:1339 #, no-c-format msgid "RAID6" msgstr "" #. Tag: entry -#: using-d-i.xml:1332 +#: using-d-i.xml:1340 #, no-c-format msgid "4" msgstr "" #. Tag: entry -#: using-d-i.xml:1335 +#: using-d-i.xml:1343 #, no-c-format msgid "Size of the smallest partition multiplied by (number of devices in RAID minus two)" msgstr "" #. Tag: entry -#: using-d-i.xml:1342 +#: using-d-i.xml:1350 #, no-c-format msgid "RAID10" msgstr "" #. Tag: entry -#: using-d-i.xml:1346 +#: using-d-i.xml:1354 #, no-c-format msgid "Total of all partitions divided by the number of chunk copies (defaults to two)" msgstr "" #. Tag: para -#: using-d-i.xml:1353 +#: using-d-i.xml:1361 #, no-c-format msgid "If you want to know more about Software RAID, have a look at Software RAID HOWTO." msgstr "" #. Tag: para -#: using-d-i.xml:1358 +#: using-d-i.xml:1366 #, no-c-format msgid "To create a MD device, you need to have the desired partitions it should consist of marked for use in a RAID. (This is done in partman in the Partition settings menu where you should select Use as: physical volume for RAID .)" msgstr "" #. Tag: para -#: using-d-i.xml:1367 +#: using-d-i.xml:1375 #, no-c-format msgid "Make sure that the system can be booted with the partitioning scheme you are planning. In general it will be necessary to create a separate file system for /boot when using RAID for the root (/) file system. Most boot loaders (including lilo and grub) do support mirrored (not striped!) RAID1, so using for example RAID5 for / and RAID1 for /boot can be an option." msgstr "" #. Tag: para -#: using-d-i.xml:1379 +#: using-d-i.xml:1387 #, no-c-format msgid "Support for MD is a relatively new addition to the installer. You may experience problems for some RAID levels and in combination with some bootloaders if you try to use MD for the root (/) file system. For experienced users, it may be possible to work around some of these problems by executing some configuration or installation steps manually from a shell." msgstr "" #. Tag: para -#: using-d-i.xml:1388 +#: using-d-i.xml:1396 #, no-c-format msgid "Next, you should choose Configure software RAID from the main partman menu. (The menu will only appear after you mark at least one partition for use as physical volume for RAID.) On the first screen of mdcfg simply select Create MD device. You will be presented with a list of supported types of MD devices, from which you should choose one (e.g. RAID1). What follows depends on the type of MD you selected." msgstr "" #. Tag: para -#: using-d-i.xml:1401 +#: using-d-i.xml:1409 #, no-c-format msgid "RAID0 is simple — you will be issued with the list of available RAID partitions and your only task is to select the partitions which will form the MD." msgstr "" #. Tag: para -#: using-d-i.xml:1408 +#: using-d-i.xml:1416 #, no-c-format msgid "RAID1 is a bit more tricky. First, you will be asked to enter the number of active devices and the number of spare devices which will form the MD. Next, you need to select from the list of available RAID partitions those that will be active and then those that will be spare. The count of selected partitions must be equal to the number provided few seconds ago. Don't worry. If you make a mistake and select different number of partitions, the &d-i; won't let you continue until you correct the issue." msgstr "" #. Tag: para -#: using-d-i.xml:1420 +#: using-d-i.xml:1428 #, no-c-format msgid "RAID5 has a similar setup procedure as RAID1 with the exception that you need to use at least three active partitions." msgstr "" #. Tag: para -#: using-d-i.xml:1426 +#: using-d-i.xml:1434 #, no-c-format msgid "RAID6 also has a similar setup procedure as RAID1 except that at least four active partitions are required." msgstr "" #. Tag: para -#: using-d-i.xml:1432 +#: using-d-i.xml:1440 #, no-c-format msgid "RAID10 again has a similar setup procedure as RAID1 except in expert mode. In expert mode, &d-i; will ask you for the layout. The layout has two parts. The first part is the layout type. It is either n (for near copies), f (for far copies), or o (for offset copies). The second part is the number of copies to make of the data. There must be at least that many active devices so that all of the copies can be distributed onto different disks." msgstr "" #. Tag: para -#: using-d-i.xml:1446 +#: using-d-i.xml:1454 #, no-c-format msgid "It is perfectly possible to have several types of MD at once. For example, if you have three 200 GB hard drives dedicated to MD, each containing two 100 GB partitions, you can combine the first partitions on all three disks into the RAID0 (fast 300 GB video editing partition) and use the other three partitions (2 active and 1 spare) for RAID1 (quite reliable 100 GB partition for /home)." msgstr "" #. Tag: para -#: using-d-i.xml:1455 +#: using-d-i.xml:1463 #, no-c-format msgid "After you setup MD devices to your liking, you can Finish mdcfg to return back to the partman to create filesystems on your new MD devices and assign them the usual attributes like mountpoints." msgstr "" #. Tag: title -#: using-d-i.xml:1470 +#: using-d-i.xml:1478 #, no-c-format msgid "Configuring the Logical Volume Manager (LVM)" msgstr "" #. Tag: para -#: using-d-i.xml:1471 +#: using-d-i.xml:1479 #, no-c-format msgid "If you are working with computers at the level of system administrator or advanced user, you have surely seen the situation where some disk partition (usually the most important one) was short on space, while some other partition was grossly underused and you had to manage this situation with moving stuff around, symlinking, etc." msgstr "" #. Tag: para -#: using-d-i.xml:1479 +#: using-d-i.xml:1487 #, no-c-format msgid "To avoid the described situation you can use Logical Volume Manager (LVM). Simply said, with LVM you can combine your partitions (physical volumes in LVM lingo) to form a virtual disk (so called volume group), which can then be divided into virtual partitions (logical volumes). The point is that logical volumes (and of course underlying volume groups) can span across several physical disks." msgstr "" #. Tag: para -#: using-d-i.xml:1489 +#: using-d-i.xml:1497 #, no-c-format msgid "Now when you realize you need more space for your old 160GB /home partition, you can simply add a new 300GB disk to the computer, join it with your existing volume group and then resize the logical volume which holds your /home filesystem and voila — your users have some room again on their renewed 460GB partition. This example is of course a bit oversimplified. If you haven't read it yet, you should consult the LVM HOWTO." msgstr "" #. Tag: para -#: using-d-i.xml:1500 +#: using-d-i.xml:1508 #, no-c-format msgid "LVM setup in &d-i; is quite simple and completely supported inside partman. First, you have to mark the partition(s) to be used as physical volumes for LVM. This is done in the Partition settings menu where you should select Use as: physical volume for LVM ." msgstr "" #. Tag: para -#: using-d-i.xml:1509 +#: using-d-i.xml:1517 #, no-c-format msgid "When you return to the main partman screen, you will see a new option Configure the Logical Volume Manager. When you select that, you will first be asked to confirm pending changes to the partition table (if any) and after that the LVM configuration menu will be shown. Above the menu a summary of the LVM configuration is shown. The menu itself is context sensitive and only shows valid actions. The possible actions are:" msgstr "" #. Tag: para -#: using-d-i.xml:1520 +#: using-d-i.xml:1528 #, no-c-format msgid "Display configuration details: shows LVM device structure, names and sizes of logical volumes and more" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1525 +#: using-d-i.xml:1533 #, no-c-format msgid "Create volume group" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1528 +#: using-d-i.xml:1536 #, no-c-format msgid "Create logical volume" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1531 +#: using-d-i.xml:1539 #, no-c-format msgid "Delete volume group" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1534 +#: using-d-i.xml:1542 #, no-c-format msgid "Delete logical volume" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1537 +#: using-d-i.xml:1545 #, no-c-format msgid "Extend volume group" msgstr "" #. Tag: guimenuitem -#: using-d-i.xml:1540 +#: using-d-i.xml:1548 #, no-c-format msgid "Reduce volume group" msgstr "" #. Tag: para -#: using-d-i.xml:1542 +#: using-d-i.xml:1550 #, no-c-format msgid "Finish: return to the main partman screen" msgstr "" #. Tag: para -#: using-d-i.xml:1548 +#: using-d-i.xml:1556 #, no-c-format msgid "Use the options in that menu to first create a volume group and then create your logical volumes inside it." msgstr "" #. Tag: para -#: using-d-i.xml:1553 +#: using-d-i.xml:1561 #, no-c-format msgid "After you return to the main partman screen, any created logical volumes will be displayed in the same way as ordinary partitions (and you should treat them as such)." msgstr "" #. Tag: title -#: using-d-i.xml:1567 +#: using-d-i.xml:1575 #, no-c-format msgid "Configuring Encrypted Volumes" msgstr "" #. Tag: para -#: using-d-i.xml:1568 +#: using-d-i.xml:1576 #, no-c-format msgid "&d-i; allows you to set up encrypted partitions. Every file you write to such a partition is immediately saved to the device in encrypted form. Access to the encrypted data is granted only after entering the passphrase used when the encrypted partition was originally created. This feature is useful to protect sensitive data in case your laptop or hard drive gets stolen. The thief might get physical access to the hard drive, but without knowing the right passphrase, the data on the hard drive will look like random characters." msgstr "" #. Tag: para -#: using-d-i.xml:1580 +#: using-d-i.xml:1588 #, no-c-format msgid "The two most important partitions to encrypt are: the home partition, where your private data resides, and the swap partition, where sensitive data might be stored temporarily during operation. Of course, nothing prevents you from encrypting any other partitions that might be of interest. For example /var where database servers, mail servers or print servers store their data, or /tmp which is used by various programs to store potentially interesting temporary files. Some people may even want to encrypt their whole system. The only exception is the /boot partition which must remain unencrypted, because currently there is no way to load the kernel from an encrypted partition." msgstr "" #. Tag: para -#: using-d-i.xml:1595 +#: using-d-i.xml:1603 #, no-c-format msgid "Please note that the performance of encrypted partitions will be less than that of unencrypted ones because the data needs to be decrypted or encrypted for every read or write. The performance impact depends on your CPU speed, chosen cipher and a key length." msgstr "" #. Tag: para -#: using-d-i.xml:1602 +#: using-d-i.xml:1610 #, no-c-format msgid "To use encryption, you have to create a new partition by selecting some free space in the main partitioning menu. Another option is to choose an existing partition (e.g. a regular partition, an LVM logical volume or a RAID volume). In the Partition settings menu, you need to select physical volume for encryption at the Use as: option. The menu will then change to include several cryptographic options for the partition." msgstr "" #. Tag: para -#: using-d-i.xml:1613 +#: using-d-i.xml:1621 #, no-c-format msgid "&d-i; supports several encryption methods. The default method is dm-crypt (included in newer Linux kernels, able to host LVM physical volumes), the other is loop-AES (older, maintained separately from the Linux kernel tree). Unless you have compelling reasons to do otherwise, it is recommended to use the default." msgstr "" #. Tag: para -#: using-d-i.xml:1625 +#: using-d-i.xml:1633 #, no-c-format msgid "First, let's have a look at the options available when you select Device-mapper (dm-crypt) as the encryption method. As always: when in doubt, use the defaults, because they have been carefully chosen with security in mind." msgstr "" #. Tag: term -#: using-d-i.xml:1635 +#: using-d-i.xml:1643 #, no-c-format msgid "Encryption: aes" msgstr "" #. Tag: para -#: using-d-i.xml:1637 +#: using-d-i.xml:1645 #, no-c-format msgid "This option lets you select the encryption algorithm (cipher) which will be used to encrypt the data on the partition. &d-i; currently supports the following block ciphers: aes, blowfish, serpent, and twofish. It is beyond the scope of this document to discuss the qualities of these different algorithms, however, it might help your decision to know that in 2000, AES was chosen by the American National Institute of Standards and Technology as the standard encryption algorithm for protecting sensitive information in the 21st century." msgstr "" #. Tag: term -#: using-d-i.xml:1655 +#: using-d-i.xml:1663 #, no-c-format msgid "Key size: 256" msgstr "" #. Tag: para -#: using-d-i.xml:1657 +#: using-d-i.xml:1665 #, no-c-format msgid "Here you can specify the length of the encryption key. With a larger key size, the strength of the encryption is generally improved. On the other hand, increasing the length of the key usually has a negative impact on performance. Available key sizes vary depending on the cipher." msgstr "" #. Tag: term -#: using-d-i.xml:1669 +#: using-d-i.xml:1677 #, no-c-format msgid "IV algorithm: cbc-essiv:sha256" msgstr "" #. Tag: para -#: using-d-i.xml:1671 +#: using-d-i.xml:1679 #, no-c-format msgid "The Initialization Vector or IV algorithm is used in cryptography to ensure that applying the cipher on the same clear text data with the same key always produces a unique cipher text. The idea is to prevent the attacker from deducing information from repeated patterns in the encrypted data." msgstr "" #. Tag: para -#: using-d-i.xml:1681 +#: using-d-i.xml:1689 #, no-c-format msgid "From the provided alternatives, the default cbc-essiv:sha256 is currently the least vulnerable to known attacks. Use the other alternatives only when you need to ensure compatibility with some previously installed system that is not able to use newer algorithms." msgstr "" #. Tag: term -#: using-d-i.xml:1693 +#: using-d-i.xml:1701 #, no-c-format msgid "Encryption key: Passphrase" msgstr "" #. Tag: para -#: using-d-i.xml:1695 +#: using-d-i.xml:1703 #, no-c-format msgid "Here you can choose the type of the encryption key for this partition." msgstr "" #. Tag: term -#: using-d-i.xml:1701 +#: using-d-i.xml:1709 #, no-c-format msgid "Passphrase" msgstr "" #. Tag: para -#: using-d-i.xml:1702 +#: using-d-i.xml:1710 #, no-c-format msgid "The encryption key will be computed Using a passphrase as the key currently means that the partition will be set up using LUKS. on the basis of a passphrase which you will be able to enter later in the process." msgstr "" #. Tag: term -#: using-d-i.xml:1717 using-d-i.xml:1810 +#: using-d-i.xml:1725 using-d-i.xml:1818 #, no-c-format msgid "Random key" msgstr "" #. Tag: para -#: using-d-i.xml:1718 +#: using-d-i.xml:1726 #, no-c-format msgid "A new encryption key will be generated from random data each time you try to bring up the encrypted partition. In other words: on every shutdown the content of the partition will be lost as the key is deleted from memory. (Of course, you could try to guess the key with a brute force attack, but unless there is an unknown weakness in the cipher algorithm, it is not achievable in our lifetime.)" msgstr "" #. Tag: para -#: using-d-i.xml:1727 +#: using-d-i.xml:1735 #, no-c-format msgid "Random keys are useful for swap partitions because you do not need to bother yourself with remembering the passphrase or wiping sensitive information from the swap partition before shutting down your computer. However, it also means that you will not be able to use the suspend-to-disk functionality offered by newer Linux kernels as it will be impossible (during a subsequent boot) to recover the suspended data written to the swap partition." msgstr "" #. Tag: term -#: using-d-i.xml:1746 using-d-i.xml:1823 +#: using-d-i.xml:1754 using-d-i.xml:1831 #, no-c-format msgid "Erase data: yes" msgstr "" #. Tag: para -#: using-d-i.xml:1748 +#: using-d-i.xml:1756 #, no-c-format msgid "Determines whether the content of this partition should be overwritten with random data before setting up the encryption. This is recommended because it might otherwise be possible for an attacker to discern which parts of the partition are in use and which are not. In addition, this will make it harder to recover any leftover data from previous installations It is believed that the guys from three-letter agencies can restore the data even after several rewrites of the magnetooptical media, though. ." msgstr "" #. Tag: para -#: using-d-i.xml:1768 +#: using-d-i.xml:1776 #, no-c-format msgid "If you select Encryption method: Loopback (loop-AES) , the menu changes to provide the following options:" msgstr "" #. Tag: term -#: using-d-i.xml:1777 +#: using-d-i.xml:1785 #, no-c-format msgid "Encryption: AES256" msgstr "" #. Tag: para -#: using-d-i.xml:1779 +#: using-d-i.xml:1787 #, no-c-format msgid "For loop-AES, unlike dm-crypt, the options for cipher and key size are combined, so you can select both at the same time. Please see the above sections on ciphers and key sizes for further information." msgstr "" #. Tag: term -#: using-d-i.xml:1789 +#: using-d-i.xml:1797 #, no-c-format msgid "Encryption key: Keyfile (GnuPG)" msgstr "" #. Tag: para -#: using-d-i.xml:1791 +#: using-d-i.xml:1799 #, no-c-format msgid "Here you can select the type of the encryption key for this partition." msgstr "" #. Tag: term -#: using-d-i.xml:1797 +#: using-d-i.xml:1805 #, no-c-format msgid "Keyfile (GnuPG)" msgstr "" #. Tag: para -#: using-d-i.xml:1798 +#: using-d-i.xml:1806 #, no-c-format msgid "The encryption key will be generated from random data during the installation. Moreover this key will be encrypted with GnuPG, so to use it, you will need to enter the proper passphrase (you will be asked to provide one later in the process)." msgstr "" #. Tag: para -#: using-d-i.xml:1811 +#: using-d-i.xml:1819 #, no-c-format msgid "Please see the section on random keys above." msgstr "" #. Tag: para -#: using-d-i.xml:1825 +#: using-d-i.xml:1833 #, no-c-format msgid "Please see the the section on erasing data above." msgstr "" #. Tag: para -#: using-d-i.xml:1834 +#: using-d-i.xml:1842 #, no-c-format msgid "After you have selected the desired parameters for your encrypted partitions, return back to the main partitioning menu. There should now be a new menu item called Configure encrypted volumes. After you select it, you will be asked to confirm the deletion of data on partitions marked to be erased and possibly other actions such as writing a new partition table. For large partitions this might take some time." msgstr "" #. Tag: para -#: using-d-i.xml:1844 +#: using-d-i.xml:1852 #, no-c-format msgid "Next you will be asked to enter a passphrase for partitions configured to use one. Good passphrases should be longer than 8 characters, should be a mixture of letters, numbers and other characters and should not contain common dictionary words or information easily associable with you (such as birthdates, hobbies, pet names, names of family members or relatives, etc.)." msgstr "" #. Tag: para -#: using-d-i.xml:1853 +#: using-d-i.xml:1861 #, no-c-format msgid "Before you input any passphrases, you should have made sure that your keyboard is configured correctly and generates the expected characters. If you are unsure, you can switch to the second virtual console and type some text at the prompt. This ensures that you won't be surprised later, e.g. by trying to input a passphrase using a qwerty keyboard layout when you used an azerty layout during the installation. This situation can have several causes. Maybe you switched to another keyboard layout during the installation, or the selected keyboard layout might not have been set up yet when entering the passphrase for the root file system." msgstr "" #. Tag: para -#: using-d-i.xml:1866 +#: using-d-i.xml:1874 #, no-c-format msgid "If you selected to use methods other than a passphrase to create encryption keys, they will be generated now. Because the kernel may not have gathered a sufficient amount of entropy at this early stage of the installation, the process may take a long time. You can help speed up the process by generating entropy: e.g. by pressing random keys, or by switching to the shell on the second virtual console and generating some network and disk traffic (downloading some files, feeding big files into /dev/null, etc.). This will be repeated for each partition to be encrypted." msgstr "" #. Tag: para -#: using-d-i.xml:1882 +#: using-d-i.xml:1890 #, no-c-format msgid "" "After returning to the main partitioning menu, you will see all encrypted volumes as additional partitions which can be configured in the same way as ordinary partitions. The following example shows two different volumes. The first one is encrypted via dm-crypt, the second one via loop-AES. \n" @@ -1500,607 +1506,607 @@ msgid "" msgstr "" #. Tag: para -#: using-d-i.xml:1895 +#: using-d-i.xml:1903 #, no-c-format msgid "One thing to note here are the identifiers in parentheses (sda2_crypt and loop0 in this case) and the mount points you assigned to each encrypted volume. You will need this information later when booting the new system. The differences between ordinary boot process and boot process with encryption involved will be covered later in ." msgstr "" #. Tag: para -#: using-d-i.xml:1905 +#: using-d-i.xml:1913 #, no-c-format msgid "Once you are satisfied with the partitioning scheme, continue with the installation." msgstr "" #. Tag: title -#: using-d-i.xml:1916 +#: using-d-i.xml:1924 #, no-c-format msgid "Installing the Base System" msgstr "" #. Tag: para -#: using-d-i.xml:1917 +#: using-d-i.xml:1925 #, no-c-format msgid "Although this stage is the least problematic, it consumes a significant fraction of the install because it downloads, verifies and unpacks the whole base system. If you have a slow computer or network connection, this could take some time." msgstr "" #. Tag: para -#: using-d-i.xml:1930 +#: using-d-i.xml:1938 #, no-c-format msgid "During installation of the base system, package unpacking and setup messages are redirected to tty4. You can access this terminal by pressing Left AltF4; get back to the main installer process with Left AltF1." msgstr "" #. Tag: para -#: using-d-i.xml:1939 +#: using-d-i.xml:1947 #, no-c-format msgid "The unpack/setup messages generated during this phase are also saved in /var/log/syslog. You can check them there if the installation is performed over a serial console." msgstr "" #. Tag: para -#: using-d-i.xml:1945 +#: using-d-i.xml:1953 #, no-c-format msgid "As part of the installation, a Linux kernel will be installed. At the default priority, the installer will choose one for you that best matches your hardware. In lower priority modes, you will be able to choose from a list of available kernels." msgstr "" #. Tag: title -#: using-d-i.xml:1957 +#: using-d-i.xml:1965 #, no-c-format msgid "Setting Up Users And Passwords" msgstr "" #. Tag: para -#: using-d-i.xml:1958 +#: using-d-i.xml:1966 #, no-c-format msgid "After the base system has been installed, the installer will allow you to set up the root account and/or an account for the first user. Other user accounts can be created after the installation has been completed." msgstr "" #. Tag: title -#: using-d-i.xml:1972 +#: using-d-i.xml:1980 #, no-c-format msgid "Set the Root Password" msgstr "" #. Tag: para -#: using-d-i.xml:1976 +#: using-d-i.xml:1984 #, no-c-format msgid "The root account is also called the super-user; it is a login that bypasses all security protection on your system. The root account should only be used to perform system administration, and only used for as short a time as possible." msgstr "" #. Tag: para -#: using-d-i.xml:1984 +#: using-d-i.xml:1992 #, no-c-format msgid "Any password you create should contain at least 6 characters, and should contain both upper- and lower-case characters, as well as punctuation characters. Take extra care when setting your root password, since it is such a powerful account. Avoid dictionary words or use of any personal information which could be guessed." msgstr "" #. Tag: para -#: using-d-i.xml:1992 +#: using-d-i.xml:2000 #, no-c-format msgid "If anyone ever tells you they need your root password, be extremely wary. You should normally never give your root password out, unless you are administering a machine with more than one system administrator." msgstr "" #. Tag: title -#: using-d-i.xml:2002 +#: using-d-i.xml:2010 #, no-c-format msgid "Create an Ordinary User" msgstr "" #. Tag: para -#: using-d-i.xml:2004 +#: using-d-i.xml:2012 #, no-c-format msgid "The system will ask you whether you wish to create an ordinary user account at this point. This account should be your main personal log-in. You should not use the root account for daily use or as your personal login." msgstr "" #. Tag: para -#: using-d-i.xml:2013 +#: using-d-i.xml:2021 #, no-c-format msgid "Why not? Well, one reason to avoid using root's privileges is that it is very easy to do irreparable damage as root. Another reason is that you might be tricked into running a Trojan-horse program — that is a program that takes advantage of your super-user powers to compromise the security of your system behind your back. Any good book on Unix system administration will cover this topic in more detail — consider reading one if it is new to you." msgstr "" #. Tag: para -#: using-d-i.xml:2023 +#: using-d-i.xml:2031 #, no-c-format msgid "You will first be prompted for the user's full name. Then you'll be asked for a name for the user account; generally your first name or something similar will suffice and indeed will be the default. Finally, you will be prompted for a password for this account." msgstr "" #. Tag: para -#: using-d-i.xml:2030 +#: using-d-i.xml:2038 #, no-c-format msgid "If at any point after installation you would like to create another account, use the adduser command." msgstr "" #. Tag: title -#: using-d-i.xml:2041 +#: using-d-i.xml:2049 #, no-c-format msgid "Installing Additional Software" msgstr "" #. Tag: para -#: using-d-i.xml:2042 +#: using-d-i.xml:2050 #, no-c-format msgid "At this point you have a usable but limited system. Most users will want to install additional software on the system to tune it to their needs, and the installer allows you do so. This step can take even longer than installing the base system if you have a slow computer or network connection." msgstr "" #. Tag: title -#: using-d-i.xml:2057 +#: using-d-i.xml:2065 #, no-c-format msgid "Configuring apt" msgstr "" #. Tag: para -#: using-d-i.xml:2059 +#: using-d-i.xml:2067 #, no-c-format msgid "One of the tools used to install packages on a &debian; system is a program called apt-get, from the apt package Note that the program which actually installs the packages is called dpkg. However, this program is more of a low-level tool. apt-get is a higher-level tool, which will invoke dpkg as appropriate. It knows how to retrieve packages from your CD, the network, or wherever. It is also able to automatically install other packages which are required to make the package you're trying to install work correctly. . Other front-ends for package management, like aptitude and synaptic, are also in use. These front-ends are recommended for new users, since they integrate some additional features (package searching and status checks) in a nice user interface. In fact, aptitude is now the recommended utility for package management." msgstr "" #. Tag: para -#: using-d-i.xml:2083 +#: using-d-i.xml:2091 #, no-c-format msgid "apt must be configured so that it knows from where to retrieve packages. The results of this configuration are written to the file /etc/apt/sources.list. You can examine and edit this file to your liking after the installation is complete." msgstr "" #. Tag: para -#: using-d-i.xml:2090 +#: using-d-i.xml:2098 #, no-c-format msgid "If you are installing at default priority, the installer will largely take care of the configuration automatically, based on the installation method you are using and possibly using choices made earlier in the installation. In most cases the installer will automatically add a security mirror and, if you are installing the stable distribution, a mirror for the volatile update service." msgstr "" #. Tag: para -#: using-d-i.xml:2099 +#: using-d-i.xml:2107 #, no-c-format msgid "If you are installing at a lower priority (e.g. in expert mode), you will be able to make more decisions yourself. You can choose whether or not to use the security and/or volatile update services, and you can choose to add packages from the contrib and non-free sections of the archive." msgstr "" #. Tag: title -#: using-d-i.xml:2110 +#: using-d-i.xml:2118 #, no-c-format msgid "Installing from more than one CD or DVD" msgstr "" #. Tag: para -#: using-d-i.xml:2112 +#: using-d-i.xml:2120 #, no-c-format msgid "If you are installing from a CD or a DVD that is part of a larger set, the installer will ask if you want to scan additional CDs or DVDs. If you have additional CDs or DVDs available, you probably want to do this so the installer can use the packages included on them." msgstr "" #. Tag: para -#: using-d-i.xml:2119 +#: using-d-i.xml:2127 #, no-c-format msgid "If you do not have any additional CDs or DVDs, that is no problem: using them is not required. If you also do not use a network mirror (as explained in the next section), it can mean that not all packages belonging to the tasks you select in the next step of the installation can be installed." msgstr "" #. Tag: para -#: using-d-i.xml:2127 +#: using-d-i.xml:2135 #, no-c-format msgid "Packages are included on CDs (and DVDs) in the order of their popularity. This means that for most uses only the first CDs in a set are needed and that only very few people actually use any of the packages included on the last CDs in a set." msgstr "" #. Tag: para -#: using-d-i.xml:2134 +#: using-d-i.xml:2142 #, no-c-format msgid "It also means that buying or downloading and burning a full CD set is just a waste of money as you'll never use most of them. In most cases you are better off getting only the first 3 to 8 CDs and installing any additional packages you may need from the Internet by using a mirror. The same goes for DVD sets: the first DVD, or maybe the first two DVDs will cover most needs." msgstr "" #. Tag: para -#: using-d-i.xml:2143 +#: using-d-i.xml:2151 #, no-c-format msgid "A good rule of thumb is that for a regular desktop installation (using the GNOME desktop environment) only the first three CDs are needed. For the alternative desktop environments (KDE or Xfce), additional CDs are needed. The first DVD easily covers all three desktop environments." msgstr "" #. Tag: para -#: using-d-i.xml:2151 +#: using-d-i.xml:2159 #, no-c-format msgid "If you do scan multiple CDs or DVDs, the installer will prompt you to exchange them when it needs packages from another CD/DVD than the one currently in the drive. Note that only CDs or DVDs that belong to the same set should be scanned. The order in which they are scanned does not really matter, but scanning them in ascending order will reduce the chance of mistakes." msgstr "" #. Tag: title -#: using-d-i.xml:2164 +#: using-d-i.xml:2172 #, no-c-format msgid "Using a network mirror" msgstr "" #. Tag: para -#: using-d-i.xml:2166 +#: using-d-i.xml:2174 #, no-c-format msgid "One question that will be asked during most installs is whether or not to use a network mirror as a source for packages. In most cases the default answer should be fine, but there are some exceptions." msgstr "" #. Tag: para -#: using-d-i.xml:2172 +#: using-d-i.xml:2180 #, no-c-format msgid "If you are not installing from a full CD or DVD or using a full CD/DVD image, you really should use a network mirror as otherwise you will end up with only a very minimal system. However, if you have a limited Internet connection it is best not to select the desktop task in the next step of the installation." msgstr "" #. Tag: para -#: using-d-i.xml:2181 +#: using-d-i.xml:2189 #, no-c-format msgid "If you are installing from a single full CD or using a full CD image, using a network mirror is not required, but is still strongly recommended because a single CD contains only a fairly limited number of packages. If you have a limited Internet connection it may still be best to not select a network mirror here, but to finish the installation using only what's available on the CD and selectively install additional packages after the installation (i.e. after you have rebooted into the new system)." msgstr "" #. Tag: para -#: using-d-i.xml:2192 +#: using-d-i.xml:2200 #, no-c-format msgid "If you are installing from a DVD or using a DVD image, any packages needed during the installation should be present on the first DVD. The same is true if you have scanned multiple CDs as explained in the previous section. Use of a network mirror is optional." msgstr "" #. Tag: para -#: using-d-i.xml:2199 +#: using-d-i.xml:2207 #, no-c-format msgid "One advantage of adding a network mirror is that updates that have occurred since the CD/DVD set was created and have been included in a point release, will become available for installation, thus extending the life of your CD/DVD set without compromising the security or stability of the installed system." msgstr "" #. Tag: para -#: using-d-i.xml:2206 +#: using-d-i.xml:2214 #, no-c-format msgid "In summary: selecting a network mirror is generally a good idea, except if you do not have a good Internet connection. If the current version of a package is available from CD/DVD, the installer will always use that. The amount of data that will be downloaded if you do select a mirror thus depends on" msgstr "" #. Tag: para -#: using-d-i.xml:2215 +#: using-d-i.xml:2223 #, no-c-format msgid "the tasks you select in the next step of the installation," msgstr "" #. Tag: para -#: using-d-i.xml:2220 +#: using-d-i.xml:2228 #, no-c-format msgid "which packages are needed for those tasks," msgstr "" #. Tag: para -#: using-d-i.xml:2225 +#: using-d-i.xml:2233 #, no-c-format msgid "which of those packages are present on the CDs or DVDs you have scanned, and" msgstr "" #. Tag: para -#: using-d-i.xml:2230 +#: using-d-i.xml:2238 #, no-c-format msgid "whether any updated versions of packages included on the CDs or DVDs are available from a mirror (either a regular package mirror, or a mirror for security or volatile updates)." msgstr "" #. Tag: para -#: using-d-i.xml:2239 +#: using-d-i.xml:2247 #, no-c-format msgid "Note that the last point means that, even if you choose not to use a network mirror, some packages may still be downloaded from the Internet if there is a security or volatile update available for them and those services have been configured." msgstr "" #. Tag: title -#: using-d-i.xml:2255 +#: using-d-i.xml:2263 #, no-c-format msgid "Selecting and Installing Software" msgstr "" #. Tag: para -#: using-d-i.xml:2257 +#: using-d-i.xml:2265 #, no-c-format msgid "During the installation process, you are given the opportunity to select additional software to install. Rather than picking individual software packages from the &num-of-distrib-pkgs; available packages, this stage of the installation process focuses on selecting and installing predefined collections of software to quickly set up your computer to perform various tasks." msgstr "" #. Tag: para -#: using-d-i.xml:2266 +#: using-d-i.xml:2274 #, no-c-format msgid "So, you have the ability to choose tasks first, and then add on more individual packages later. These tasks loosely represent a number of different jobs or things you want to do with your computer, such as Desktop environment, Web server, or Print server You should know that to present this list, the installer is merely invoking the tasksel program. It can be run at any time after installation to install more packages (or remove them), or you can use a more fine-grained tool such as aptitude. If you are looking for a specific single package, after installation is complete, simply run aptitude install package, where package is the name of the package you are looking for. . lists the space requirements for the available tasks." msgstr "" #. Tag: para -#: using-d-i.xml:2293 +#: using-d-i.xml:2301 #, no-c-format msgid "Some tasks may be pre-selected based on the characteristics of the computer you are installing. If you disagree with these selections you can deselect them. You can even opt to install no tasks at all at this point." msgstr "" #. Tag: para -#: using-d-i.xml:2300 +#: using-d-i.xml:2308 #, no-c-format msgid "Unless you are using the special KDE or Xfce CDs, the Desktop environment task will install the GNOME desktop environment." msgstr "" #. Tag: para -#: using-d-i.xml:2307 +#: using-d-i.xml:2315 #, no-c-format msgid "It is not possible to interactively select a different desktop during the installation. However, it is possible to get &d-i; to install a KDE desktop environment instead of GNOME by using preseeding (see ) or by adding the parameter desktop=kde at the boot prompt when starting the installer. Alternatively the more lightweight Xfce desktop environment can be selected by using desktop=xfce." msgstr "" #. Tag: para -#: using-d-i.xml:2317 +#: using-d-i.xml:2325 #, no-c-format msgid "Note that this will only work if the packages needed for KDE or Xfce are actually available. If you are installing using a single full CD image, they will need to be downloaded from a mirror as most needed packages are only included on later CDs; installing KDE or Xfce this way should work fine if you are using a DVD image or any other installation method." msgstr "" #. Tag: para -#: using-d-i.xml:2325 +#: using-d-i.xml:2333 #, no-c-format msgid "The various server tasks will install software roughly as follows. DNS server: bind9; File server: samba, nfs; Mail server: exim4, spamassassin, uw-imap; Print server: cups; SQL database: postgresql; Web server: apache2." msgstr "" #. Tag: para -#: using-d-i.xml:2337 +#: using-d-i.xml:2345 #, no-c-format msgid "Once you've selected your tasks, select &BTN-CONT;. At this point, aptitude will install the packages that are part of the tasks you've selected." msgstr "" #. Tag: para -#: using-d-i.xml:2344 +#: using-d-i.xml:2352 #, no-c-format msgid "In the standard user interface of the installer, you can use the space bar to toggle selection of a task." msgstr "" #. Tag: para -#: using-d-i.xml:2350 +#: using-d-i.xml:2358 #, no-c-format msgid "You should be aware that especially the Desktop task is very large. Especially when installing from a normal CD-ROM in combination with a mirror for packages not on the CD-ROM, the installer may want to retrieve a lot of packages over the network. If you have a relatively slow Internet connection, this can take a long time. There is no option to cancel the installation of packages once it has started." msgstr "" #. Tag: para -#: using-d-i.xml:2359 +#: using-d-i.xml:2367 #, no-c-format msgid "Even when packages are included on the CD-ROM, the installer may still retrieve them from the mirror if the version available on the mirror is more recent than the one included on the CD-ROM. If you are installing the stable distribution, this can happen after a point release (an update of the original stable release); if you are installing the testing distribution this will happen if you are using an older image." msgstr "" #. Tag: para -#: using-d-i.xml:2368 +#: using-d-i.xml:2376 #, no-c-format msgid "Each package you selected with tasksel is downloaded, unpacked and then installed in turn by the apt-get and dpkg programs. If a particular program needs more information from the user, it will prompt you during this process." msgstr "" #. Tag: title -#: using-d-i.xml:2381 +#: using-d-i.xml:2389 #, no-c-format msgid "Making Your System Bootable" msgstr "" #. Tag: para -#: using-d-i.xml:2383 +#: using-d-i.xml:2391 #, no-c-format msgid "If you are installing a diskless workstation, obviously, booting off the local disk isn't a meaningful option, and this step will be skipped. You may wish to set OpenBoot to boot from the network by default; see ." msgstr "" #. Tag: title -#: using-d-i.xml:2398 +#: using-d-i.xml:2406 #, no-c-format msgid "Detecting other operating systems" msgstr "" #. Tag: para -#: using-d-i.xml:2400 +#: using-d-i.xml:2408 #, no-c-format msgid "Before a boot loader is installed, the installer will attempt to probe for other operating systems which are installed on the machine. If it finds a supported operating system, you will be informed of this during the boot loader installation step, and the computer will be configured to boot this other operating system in addition to Debian." msgstr "" #. Tag: para -#: using-d-i.xml:2408 +#: using-d-i.xml:2416 #, no-c-format msgid "Note that multiple operating systems booting on a single machine is still something of a black art. The automatic support for detecting and setting up boot loaders to boot other operating systems varies by architecture and even by subarchitecture. If it does not work you should consult your boot manager's documentation for more information." msgstr "" #. Tag: title -#: using-d-i.xml:2426 +#: using-d-i.xml:2434 #, no-c-format msgid "Install aboot on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2427 +#: using-d-i.xml:2435 #, no-c-format msgid "If you have booted from SRM and you select this option, the installer will write aboot to the first sector of the disk on which you installed Debian. Be very careful — it is not possible to boot multiple operating systems (e.g. GNU/Linux, Free/Open/NetBSD, OSF/1 a.k.a. Digital Unix a.k.a. Tru64 Unix, or OpenVMS) from the same disk. If you also have a different operating system installed on the disk where you have installed Debian, you will have to boot GNU/Linux from a floppy instead." msgstr "" #. Tag: title -#: using-d-i.xml:2447 +#: using-d-i.xml:2455 #, no-c-format msgid "palo-installer" msgstr "" #. Tag: para -#: using-d-i.xml:2448 +#: using-d-i.xml:2456 #, no-c-format msgid "The bootloader on PA-RISC is palo. PALO is similar in configuration and usage to LILO, with a few exceptions. First of all, PALO allows you to boot any kernel image on your boot partition. This is because PALO can actually read Linux partitions." msgstr "" #. Tag: para -#: using-d-i.xml:2457 +#: using-d-i.xml:2465 #, no-c-format msgid "hppa FIXME ( need more info )" msgstr "" #. Tag: title -#: using-d-i.xml:2469 +#: using-d-i.xml:2477 #, no-c-format msgid "Install the Grub Boot Loader on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2471 +#: using-d-i.xml:2479 #, no-c-format msgid "The main &architecture; boot loader is called grub. Grub is a flexible and robust boot loader and a good default choice for new users and old hands alike." msgstr "" #. Tag: para -#: using-d-i.xml:2477 +#: using-d-i.xml:2485 #, no-c-format msgid "By default, grub will be installed into the Master Boot Record (MBR), where it will take over complete control of the boot process. If you prefer, you can install it elsewhere. See the grub manual for complete information." msgstr "" #. Tag: para -#: using-d-i.xml:2483 +#: using-d-i.xml:2491 #, no-c-format msgid "If you do not want to install grub, use the &BTN-GOBACK; button to get to the main menu, and from there select whatever bootloader you would like to use." msgstr "" #. Tag: title -#: using-d-i.xml:2496 +#: using-d-i.xml:2504 #, no-c-format msgid "Install the LILO Boot Loader on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2498 +#: using-d-i.xml:2506 #, no-c-format msgid "The second &architecture; boot loader is called LILO. It is an old complex program which offers lots of functionality, including DOS, Windows, and OS/2 boot management. Please carefully read the instructions in the directory /usr/share/doc/lilo/ if you have special needs; also see the LILO mini-HOWTO." msgstr "" #. Tag: para -#: using-d-i.xml:2508 +#: using-d-i.xml:2516 #, no-c-format msgid "Currently the LILO installation will only create menu entries for other operating systems if these can be chainloaded. This means you may have to manually add a menu entry for operating systems like GNU/Linux and GNU/Hurd after the installation." msgstr "" #. Tag: para -#: using-d-i.xml:2516 +#: using-d-i.xml:2524 #, no-c-format msgid "&d-i; offers you three choices on where to install the LILO boot loader:" msgstr "" #. Tag: term -#: using-d-i.xml:2523 +#: using-d-i.xml:2531 #, no-c-format msgid "Master Boot Record (MBR)" msgstr "" #. Tag: para -#: using-d-i.xml:2523 +#: using-d-i.xml:2531 #, no-c-format msgid "This way the LILO will take complete control of the boot process." msgstr "" #. Tag: term -#: using-d-i.xml:2530 +#: using-d-i.xml:2538 #, no-c-format msgid "new Debian partition" msgstr "" #. Tag: para -#: using-d-i.xml:2530 +#: using-d-i.xml:2538 #, no-c-format msgid "Choose this if you want to use another boot manager. LILO will install itself at the beginning of the new Debian partition and it will serve as a secondary boot loader." msgstr "" #. Tag: term -#: using-d-i.xml:2539 +#: using-d-i.xml:2547 #, no-c-format msgid "Other choice" msgstr "" #. Tag: para -#: using-d-i.xml:2539 +#: using-d-i.xml:2547 #, no-c-format msgid "Useful for advanced users who want to install LILO somewhere else. In this case you will be asked for desired location. You can use traditional device names such as /dev/hda or /dev/sda." msgstr "" #. Tag: para -#: using-d-i.xml:2549 +#: using-d-i.xml:2557 #, no-c-format msgid "If you can no longer boot into Windows 9x (or DOS) after this step, you'll need to use a Windows 9x (MS-DOS) boot disk and use the fdisk /mbr command to reinstall the MS-DOS master boot record — however, this means that you'll need to use some other way to get back into Debian!" msgstr "" #. Tag: title -#: using-d-i.xml:2565 +#: using-d-i.xml:2573 #, no-c-format msgid "Install the ELILO Boot Loader on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2567 +#: using-d-i.xml:2575 #, no-c-format msgid "The &architecture; boot loader is called elilo. It is modeled on the lilo boot loader for the x86 architecture and uses a similar configuration file. However, instead of writing an MBR or partition boot record to the disk, it copies the necessary files to a separate FAT formatted disk partition and modifies the EFI Boot Manager menu in the firmware to point to the files in the EFI partition. The elilo boot loader is really in two parts. The /usr/sbin/elilo command manages the partition and copies files into it. The elilo.efi program is copied into the EFI partition and then run by the EFI Boot Manager to do the actual work of loading and starting the Linux kernel." msgstr "" #. Tag: para -#: using-d-i.xml:2583 +#: using-d-i.xml:2591 #, no-c-format msgid "The elilo configuration and installation is done as the last step of installing the packages of the base installation. &d-i; will present you with a list of potential disk partitions that it has found suitable for an EFI partition. Select the partition you set up earlier in the installation, typically a partition on the same disk that contains your root filesystem." msgstr "" #. Tag: title -#: using-d-i.xml:2595 +#: using-d-i.xml:2603 #, no-c-format msgid "Choose the correct partition!" msgstr "" #. Tag: para -#: using-d-i.xml:2597 +#: using-d-i.xml:2605 #, no-c-format msgid "The criteria for selecting a partition is that it is FAT format filesystem with its boot flag set. &d-i; may show multiple choices depending on what it finds from scanning all of the disks of the system including EFI partitions of other system disks and EFI diagnostic partitions. Remember, elilo may format the partition during the installation, erasing any previous contents!" msgstr "" #. Tag: title -#: using-d-i.xml:2612 +#: using-d-i.xml:2620 #, no-c-format msgid "EFI Partition Contents" msgstr "" #. Tag: para -#: using-d-i.xml:2614 +#: using-d-i.xml:2622 #, no-c-format msgid "The EFI partition is a FAT filesystem format partition on one of the hard disks of the system, usually the same disk that contains the root filesystem. It is normally not mounted on a running system as it is only needed by the EFI Boot Manager to load the system and the installer part of the elilo writes to the filesystem directly. The /usr/sbin/elilo utility writes the following files into the efi/debian directory of the EFI partition during the installation. Note that the EFI Boot Manager would find these files using the path fsn:\\efi\\debian. There may be other files in this filesystem as well over time as the system is updated or re-configured." msgstr "" #. Tag: filename -#: using-d-i.xml:2636 +#: using-d-i.xml:2644 #, no-c-format msgid "elilo.conf" msgstr "" #. Tag: para -#: using-d-i.xml:2637 +#: using-d-i.xml:2645 #, no-c-format msgid "This is the configuration file read by the boot loader when it starts. It is a copy of the /etc/elilo.conf with the filenames re-written to refer to files in the EFI partition." msgstr "" #. Tag: filename -#: using-d-i.xml:2646 +#: using-d-i.xml:2654 #, no-c-format msgid "elilo.efi" msgstr "" #. Tag: para -#: using-d-i.xml:2647 +#: using-d-i.xml:2655 #, no-c-format msgid "This is the boot loader program that the EFI Boot Manager runs to boot the system. It is the program behind the Debian GNU/Linux menu item of the EFI Boot Manager command menu." msgstr "" #. Tag: filename -#: using-d-i.xml:2657 +#: using-d-i.xml:2665 #, no-c-format msgid "initrd.img" msgstr "" #. Tag: para -#: using-d-i.xml:2658 +#: using-d-i.xml:2666 #, no-c-format msgid "This is the initial root filesystem used to boot the kernel. It is a copy of the file referenced in the /etc/elilo.conf. In a standard Debian installation it would be the file in /boot pointed to by the symbolic link /initrd.img." msgstr "" #. Tag: filename -#: using-d-i.xml:2670 +#: using-d-i.xml:2678 #, no-c-format msgid "readme.txt" msgstr "" #. Tag: para -#: using-d-i.xml:2671 +#: using-d-i.xml:2679 #, no-c-format msgid "This is a small text file warning you that the contents of the directory are managed by the elilo and that any local changes would be lost at the next time /usr/sbin/elilo is run." msgstr "" #. Tag: filename -#: using-d-i.xml:2681 +#: using-d-i.xml:2689 #, no-c-format msgid "vmlinuz" msgstr "" #. Tag: para -#: using-d-i.xml:2682 +#: using-d-i.xml:2690 #, no-c-format msgid "This is the compressed kernel itself. It is a copy of the file referenced in the /etc/elilo.conf. In a standard Debian installation it would be the file in /boot pointed to by the symbolic link /vmlinuz." msgstr "" #. Tag: title -#: using-d-i.xml:2702 +#: using-d-i.xml:2710 #, no-c-format msgid "arcboot-installer" msgstr "" #. Tag: para -#: using-d-i.xml:2703 +#: using-d-i.xml:2711 #, no-c-format msgid "" "The boot loader on SGI machines is arcboot. It has to be installed on the same hard disk as the kernel (this is done automatically by the installer). Arcboot supports different configurations which are set up in /etc/arcboot.conf. Each configuration has a unique name, the default setup as created by the installer is linux. After arcboot has been installed, the system can be booted from hard disk by setting some firmware environment variables entering \n" @@ -2113,289 +2119,289 @@ msgid "" msgstr "" #. Tag: replaceable -#: using-d-i.xml:2722 +#: using-d-i.xml:2730 #, no-c-format msgid "scsi" msgstr "" #. Tag: para -#: using-d-i.xml:2723 +#: using-d-i.xml:2731 #, no-c-format msgid "is the SCSI bus to be booted from, this is 0 for the onboard controllers" msgstr "" #. Tag: replaceable -#: using-d-i.xml:2731 +#: using-d-i.xml:2739 #, no-c-format msgid "disk" msgstr "" #. Tag: para -#: using-d-i.xml:2732 +#: using-d-i.xml:2740 #, no-c-format msgid "is the SCSI ID of the hard disk on which arcboot is installed" msgstr "" #. Tag: replaceable -#: using-d-i.xml:2740 +#: using-d-i.xml:2748 #, no-c-format msgid "partnr" msgstr "" #. Tag: para -#: using-d-i.xml:2741 +#: using-d-i.xml:2749 #, no-c-format msgid "is the number of the partition on which /etc/arcboot.conf resides" msgstr "" #. Tag: replaceable -#: using-d-i.xml:2749 +#: using-d-i.xml:2757 #, no-c-format msgid "config" msgstr "" #. Tag: para -#: using-d-i.xml:2750 +#: using-d-i.xml:2758 #, no-c-format msgid "is the name of the configuration entry in /etc/arcboot.conf, which is linux by default." msgstr "" #. Tag: title -#: using-d-i.xml:2771 +#: using-d-i.xml:2779 #, no-c-format msgid "Install Yaboot on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2772 +#: using-d-i.xml:2780 #, no-c-format msgid "Newer (mid 1998 and on) PowerMacs use yaboot as their boot loader. The installer will set up yaboot automatically, so all you need is a small 820k partition named bootstrap with type Apple_Bootstrap created back in the partitioning component. If this step completes successfully then your disk should now be bootable and OpenFirmware will be set to boot &debian;." msgstr "" #. Tag: title -#: using-d-i.xml:2790 +#: using-d-i.xml:2798 #, no-c-format msgid "Install Quik on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2791 +#: using-d-i.xml:2799 #, no-c-format msgid "The boot loader for OldWorld Power Macintosh machines is quik. You can also use it on CHRP. The installer will attempt to set up quik automatically. The setup has been known to work on 7200, 7300, and 7600 Powermacs, and on some Power Computing clones." msgstr "" #. Tag: title -#: using-d-i.xml:2807 +#: using-d-i.xml:2815 #, no-c-format msgid "zipl-installer" msgstr "" #. Tag: para -#: using-d-i.xml:2808 +#: using-d-i.xml:2816 #, no-c-format msgid "The boot loader on &arch-title; is zipl. ZIPL is similar in configuration and usage to LILO, with a few exceptions. Please take a look at LINUX for &arch-title; Device Drivers and Installation Commands from IBM's developerWorks web site if you want to know more about ZIPL." msgstr "" #. Tag: title -#: using-d-i.xml:2825 +#: using-d-i.xml:2833 #, no-c-format msgid "Install the SILO Boot Loader on a Hard Disk" msgstr "" #. Tag: para -#: using-d-i.xml:2827 +#: using-d-i.xml:2835 #, no-c-format msgid "The standard &architecture; boot loader is called silo. It is documented in /usr/share/doc/silo/. SILO is similar in configuration and usage to LILO, with a few exceptions. First of all, SILO allows you to boot any kernel image on your drive, even if it is not listed in /etc/silo.conf. This is because SILO can actually read Linux partitions. Also, /etc/silo.conf is read at boot time, so there is no need to rerun silo after installing a new kernel like you would with LILO. SILO can also read UFS partitions, which means it can boot SunOS/Solaris partitions as well. This is useful if you want to install GNU/Linux alongside an existing SunOS/Solaris install." msgstr "" #. Tag: title -#: using-d-i.xml:2852 +#: using-d-i.xml:2860 #, no-c-format msgid "Continue Without Boot Loader" msgstr "" #. Tag: para -#: using-d-i.xml:2854 +#: using-d-i.xml:2862 #, no-c-format msgid "This option can be used to complete the installation even when no boot loader is to be installed, either because the arch/subarch doesn't provide one, or because none is desired (e.g. you will use existing boot loader). This option is especially useful for Macintosh, Atari, and Amiga systems, where the original operating system must be maintained on the box and used to boot GNU/Linux." msgstr "" #. Tag: para -#: using-d-i.xml:2863 +#: using-d-i.xml:2871 #, no-c-format msgid "If you plan to manually configure your bootloader, you should check the name of the installed kernel in /target/boot. You should also check that directory for the presence of an initrd; if one is present, you will probably have to instruct your bootloader to use it. Other information you will need are the disk and partition you selected for your / filesystem and, if you chose to install /boot on a separate partition, also your /boot filesystem." msgstr "" #. Tag: title -#: using-d-i.xml:2880 +#: using-d-i.xml:2888 #, no-c-format msgid "Finishing the Installation" msgstr "" #. Tag: para -#: using-d-i.xml:2881 +#: using-d-i.xml:2889 #, no-c-format msgid "This is the last step in the Debian installation process during which the installer will do any last minute tasks. It mostly consists of tidying up after the &d-i;." msgstr "" #. Tag: title -#: using-d-i.xml:2894 +#: using-d-i.xml:2902 #, no-c-format msgid "Setting the System Clock" msgstr "" #. Tag: para -#: using-d-i.xml:2896 +#: using-d-i.xml:2904 #, no-c-format msgid "The installer may ask you if the computer's clock is set to UTC. Normally this question is avoided if possible and the installer tries to work out whether the clock is set to UTC based on things like what other operating systems are installed." msgstr "" #. Tag: para -#: using-d-i.xml:2903 +#: using-d-i.xml:2911 #, no-c-format msgid "In expert mode you will always be able to choose whether or not the clock is set to UTC. Macintosh hardware clocks are normally set to local time. If you want to dual-boot, select local time instead of UTC. Systems that (also) run Dos or Windows are normally set to local time. If you want to dual-boot, select local time instead of UTC." msgstr "" #. Tag: para -#: using-d-i.xml:2914 +#: using-d-i.xml:2922 #, no-c-format msgid "At this point &d-i; will also attempt to save the current time to the system's hardware clock. This will be done either in UTC or local time, depending on the selection that was just made." msgstr "" #. Tag: title -#: using-d-i.xml:2929 +#: using-d-i.xml:2937 #, no-c-format msgid "Reboot the System" msgstr "" #. Tag: para -#: using-d-i.xml:2931 +#: using-d-i.xml:2939 #, no-c-format msgid "You will be prompted to remove the boot media (CD, floppy, etc) that you used to boot the installer. After that the system will be rebooted into your new Debian system." msgstr "" #. Tag: para -#: using-d-i.xml:2937 +#: using-d-i.xml:2945 #, no-c-format msgid "After a final prompt the system will be halted because rebooting is not supported on &arch-title;. You then need to IPL &debian; from the DASD which you selected for the root filesystem during the first steps of the installation." msgstr "" #. Tag: title -#: using-d-i.xml:2950 +#: using-d-i.xml:2958 #, no-c-format msgid "Miscellaneous" msgstr "" #. Tag: para -#: using-d-i.xml:2951 +#: using-d-i.xml:2959 #, no-c-format msgid "The components listed in this section are usually not involved in the installation process, but are waiting in the background to help the user in case something goes wrong." msgstr "" #. Tag: title -#: using-d-i.xml:2964 +#: using-d-i.xml:2972 #, no-c-format msgid "Saving the installation logs" msgstr "" #. Tag: para -#: using-d-i.xml:2966 +#: using-d-i.xml:2974 #, no-c-format msgid "If the installation is successful, the logfiles created during the installation process will be automatically saved to /var/log/installer/ on your new Debian system." msgstr "" #. Tag: para -#: using-d-i.xml:2973 +#: using-d-i.xml:2981 #, no-c-format msgid "Choosing Save debug logs from the main menu allows you to save the log files to a floppy disk, network, hard disk, or other media. This can be useful if you encounter fatal problems during the installation and wish to study the logs on another system or attach them to an installation report." msgstr "" #. Tag: title -#: using-d-i.xml:2993 +#: using-d-i.xml:3001 #, no-c-format msgid "Using the Shell and Viewing the Logs" msgstr "" #. Tag: para -#: using-d-i.xml:2995 +#: using-d-i.xml:3003 #, no-c-format msgid "There are several methods you can use to get a shell while running an installation. On most systems, and if you are not installing over serial console, the easiest method is to switch to the second virtual console by pressing Left Alt F2 That is: press the Alt key on the left-hand side of the space bar and the F2 function key at the same time. (on a Mac keyboard, Option F2). Use Left Alt F1 to switch back to installer itself." msgstr "" #. Tag: para -#: using-d-i.xml:3013 +#: using-d-i.xml:3021 #, no-c-format msgid "For the graphical installer see also ." msgstr "" #. Tag: para -#: using-d-i.xml:3017 +#: using-d-i.xml:3025 #, no-c-format msgid "If you cannot switch consoles, there is also an Execute a Shell item on the main menu that can be used to start a shell. You can get to the main menu from most dialogs by using the &BTN-GOBACK; button one or more times. Type exit to close the shell and return to the installer." msgstr "" #. Tag: para -#: using-d-i.xml:3025 +#: using-d-i.xml:3033 #, no-c-format msgid "At this point you are booted from the RAM disk, and there is a limited set of Unix utilities available for your use. You can see what programs are available with the command ls /bin /sbin /usr/bin /usr/sbin and by typing help. The shell is a Bourne shell clone called ash and has some nice features like autocompletion and history." msgstr "" #. Tag: para -#: using-d-i.xml:3034 +#: using-d-i.xml:3042 #, no-c-format msgid "To edit and view files, use the text editor nano. Log files for the installation system can be found in the /var/log directory." msgstr "" #. Tag: para -#: using-d-i.xml:3041 +#: using-d-i.xml:3049 #, no-c-format msgid "Although you can do basically anything in a shell that the available commands allow you to do, the option to use a shell is really only there in case something goes wrong and for debugging." msgstr "" #. Tag: para -#: using-d-i.xml:3047 +#: using-d-i.xml:3055 #, no-c-format msgid "Doing things manually from the shell may interfere with the installation process and result in errors or an incomplete installation. In particular, you should always use let the installer activate your swap partition and not do this yourself from a shell." msgstr "" #. Tag: title -#: using-d-i.xml:3062 +#: using-d-i.xml:3070 #, no-c-format msgid "Installation Over the Network" msgstr "" #. Tag: para -#: using-d-i.xml:3064 +#: using-d-i.xml:3072 #, no-c-format msgid "One of the more interesting components is network-console. It allows you to do a large part of the installation over the network via SSH. The use of the network implies you will have to perform the first steps of the installation from the console, at least to the point of setting up the networking. (Although you can automate that part with .)" msgstr "" #. Tag: para -#: using-d-i.xml:3074 +#: using-d-i.xml:3082 #, no-c-format msgid "This component is not loaded into the main installation menu by default, so you have to explicitly ask for it. If you are installing from CD, you need to boot with medium priority or otherwise invoke the main installation menu and choose Load installer components from CD and from the list of additional components select network-console: Continue installation remotely using SSH. Successful load is indicated by a new menu entry called Continue installation remotely using SSH." msgstr "" #. Tag: para -#: using-d-i.xml:3087 +#: using-d-i.xml:3095 #, no-c-format msgid "For installations on &arch-title;, this is the default method after setting up the network." msgstr "" #. Tag: para -#: using-d-i.xml:3092 +#: using-d-i.xml:3100 #, no-c-format msgid "After selecting this new entry, you You will be asked for a new password to be used for connecting to the installation system and for its confirmation. That's all. Now you should see a screen which instructs you to login remotely as the user installer with the password you just provided. Another important detail to notice on this screen is the fingerprint of this system. You need to transfer the fingerprint securely to the person who will continue the installation remotely." msgstr "" #. Tag: para -#: using-d-i.xml:3104 +#: using-d-i.xml:3112 #, no-c-format msgid "Should you decide to continue with the installation locally, you can always press &enterkey;, which will bring you back to the main menu, where you can select another component." msgstr "" #. Tag: para -#: using-d-i.xml:3110 +#: using-d-i.xml:3118 #, no-c-format msgid "" "Now let's switch to the other side of the wire. As a prerequisite, you need to configure your terminal for UTF-8 encoding, because that is what the installation system uses. If you do not, remote installation will be still possible, but you may encounter strange display artefacts like destroyed dialog borders or unreadable non-ascii characters. Establishing a connection with the installation system is as simple as typing: \n" @@ -2404,32 +2410,128 @@ msgid "" msgstr "" #. Tag: para -#: using-d-i.xml:3127 +#: using-d-i.xml:3135 #, no-c-format msgid "The ssh server in the installer uses a default configuration that does not send keep-alive packets. In principle, a connection to the system being installed should be kept open indefinitely. However, in some situations — depending on your local network setup — the connection may be lost after some period of inactivity. One common case where this can happen is when there is some form of Network Address Translation (NAT) somewhere between the client and the system being installed. Depending on at which point of the installation the connection was lost, you may or may not be able to resume the installation after reconnecting." msgstr "" #. Tag: para -#: using-d-i.xml:3140 +#: using-d-i.xml:3148 #, no-c-format msgid "You may be able to avoid the connection being dropped by adding the option -o ServerAliveInterval=value when starting the ssh connection, or by adding that option in your ssh configuration file. Note however that in some cases adding this option may also cause a connection to be dropped (for example if keep-alive packets are sent during a brief network outage, from which ssh would otherwise have recovered), so it should only be used when needed." msgstr "" #. Tag: para -#: using-d-i.xml:3153 +#: using-d-i.xml:3161 #, no-c-format msgid "If you install several computers in turn and they happen to have the same IP address or hostname, ssh will refuse to connect to such host. The reason is that it will have different fingerprint, which is usually a sign of a spoofing attack. If you are sure this is not the case, you will need to delete the relevant line from ~/.ssh/known_hosts The following command will remove an existing entry for a host: ssh-keygen -R <hostname|IP address>. and try again." msgstr "" #. Tag: para -#: using-d-i.xml:3169 +#: using-d-i.xml:3177 #, no-c-format msgid "After the login you will be presented with an initial screen where you have two possibilities called Start menu and Start shell. The former brings you to the main installer menu, where you can continue with the installation as usual. The latter starts a shell from which you can examine and possibly fix the remote system. You should only start one SSH session for the installation menu, but may start multiple sessions for shells." msgstr "" #. Tag: para -#: using-d-i.xml:3179 +#: using-d-i.xml:3187 #, no-c-format msgid "After you have started the installation remotely over SSH, you should not go back to the installation session running on the local console. Doing so may corrupt the database that holds the configuration of the new system. This in turn may result in a failed installation or problems with the installed system." msgstr "" +#. Tag: title +#: using-d-i.xml:3207 +#, no-c-format +msgid "Loading Missing Firmware" +msgstr "" + +#. Tag: para +#: using-d-i.xml:3208 +#, no-c-format +msgid "As described in , some devices require firmware to be loaded. In most cases the device will not work at all if the firmware is not available; sometimes basic functionality is not impaired if it is missing and the firmware is only needed to enable additional features." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3216 +#, no-c-format +msgid "If a device driver requests firmware that is not available, &d-i; will display a dialog offering to load the missing firmware. If this option is selected, &d-i; will scan available devices for either loose firmware files or packages containing firmware. If found, the firmware will be copied to the correct location (/lib/firmware) and the driver module will be reloaded." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3226 +#, no-c-format +msgid "Which devices are scanned and which file systems are supported depends on the architecture, the installation method and the stage of the installation. Especially during the early stages of the installation, loading the firmware is most likely to succeed from a FAT-formatted floppy disk or USB stick. On i386 and amd64 firmware can also be loaded from an MMC or SD card." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3236 +#, no-c-format +msgid "Note that it is possible to skip loading the firmware if you know the device will also function without it, or if the device is not needed during the installation." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3243 +#, no-c-format +msgid "Support for loading firmware is still relatively basic and is likely to be improved in future releases of the installer. Currently &d-i; will for example not display any warning if you choose to load missing firmware, but the requested firmware is not found. Please report any issues you encounter." +msgstr "" + +#. Tag: title +#: using-d-i.xml:3253 +#, no-c-format +msgid "Preparing a medium" +msgstr "" + +#. Tag: para +#: using-d-i.xml:3254 +#, no-c-format +msgid "Although in some cases the firmware can also be loaded from a partition on a hard disk, the most common method to load firmware will be from some removable medium such as a floppy disk or a USB stick. The firmware files or packages must be placed in either the root directory or a directory named /firmware of the file system on the medium. The recommended file system to use is FAT as that is most certain to be supported during the early stages of the installation." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3264 +#, no-c-format +msgid "Tarballs containing current packages for the most common firmware are available from: Just download the tarball for the correct release and unpack it to the file system on the medium." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3278 +#, no-c-format +msgid "If the firmware you need is not included in the tarball, you can also download specific firmware packages from the (non-free section of the) archive. The following overview should list most available firmware packages but is not guaranteed to be complete and may also contain non-firmware packages:" +msgstr "" + +#. Tag: para +#: using-d-i.xml:3292 +#, no-c-format +msgid "It is also possible to copy individual firmware files to the medium. Loose firmware could be obtained for example from an already installed system or from a hardware vendor." +msgstr "" + +#. Tag: title +#: using-d-i.xml:3301 +#, no-c-format +msgid "Firmware and the Installed System" +msgstr "" + +#. Tag: para +#: using-d-i.xml:3302 +#, no-c-format +msgid "Any firmware loaded during the installation will be copied automatically to the installed system. In most cases this will ensure that the device that requires the firmware will also work correctly after the system is rebooted into the installed system. However, if the installed system runs a different kernel version from the installer there is a slight chance that the firmware cannot be loaded due to version skew." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3311 +#, no-c-format +msgid "If the firmware was loaded from a firmware package, &d-i; will also install this package for the installed system and will automatically add the non-free section of the package archive in APT's sources.list. This has the advantage that the firmware should be updated automatically if a new version becomes available." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3319 +#, no-c-format +msgid "If loading the firmware was skipped during the installation, the relevant device will probably not work with the installed system until the firmware (package) is installed manually." +msgstr "" + +#. Tag: para +#: using-d-i.xml:3326 +#, no-c-format +msgid "If the firmware was loaded from loose firmware files, the firmware copied to the installed system will not be automatically updated unless the corresponding firmware package (if available) is installed after the installation is completed." +msgstr "" + -- cgit v1.2.3