From a97aa703536535ed5ca6b7ac952ac140491f253b Mon Sep 17 00:00:00 2001 From: Felipe Augusto van de Wiel Date: Wed, 24 Feb 2010 01:14:29 +0000 Subject: [SILENT_COMMIT] Update of POT and PO files for the manual --- po/fi/boot-installer.po | 228 +++++++++++++------------- po/fi/install-methods.po | 410 +++++++++++++++++++++++++---------------------- po/fi/using-d-i.po | 350 +++++++++++++++++++++------------------- 3 files changed, 515 insertions(+), 473 deletions(-) (limited to 'po/fi') diff --git a/po/fi/boot-installer.po b/po/fi/boot-installer.po index 4ff27adfa..846ec8e4d 100644 --- a/po/fi/boot-installer.po +++ b/po/fi/boot-installer.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Debian Installation Guide boot-installer\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-11-18 01:11+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-09-14 09:43+0300\n" "Last-Translator: Tapio Lehtonen \n" "Language-Team: Finnish \n" @@ -2985,7 +2985,7 @@ msgstr "" "theme=dark." #. Tag: term -#: boot-installer.xml:2272 boot-installer.xml:2568 +#: boot-installer.xml:2272 boot-installer.xml:2559 #, no-c-format msgid "netcfg/disable_dhcp" msgstr "netcfg/disable_dhcp" @@ -3196,26 +3196,14 @@ msgstr "debian-installer/theme (theme)" #: boot-installer.xml:2393 #, no-c-format msgid "" -"When packages are installed using the package management system, it will by " -"default also install packages that are recommended by those packages. " -"Recommended packages are not strictly required for the core functionality of " -"the selected software, but they do enhance that software and should, in the " -"view of the package maintainers, normally be installed together with that " -"software." -msgstr "" - -#. Tag: para -#: boot-installer.xml:2402 -#, no-c-format -msgid "" "By setting this option to false, the package " -"management system will be configured to not automatically install such " +"management system will be configured to not automatically install " "Recommends, both during the installation and for the " -"installed system." +"installed system. See also ." msgstr "" #. Tag: para -#: boot-installer.xml:2409 +#: boot-installer.xml:2400 #, no-c-format msgid "" "Note that this option allows to have a leaner system, but can also result in " @@ -3226,13 +3214,13 @@ msgid "" msgstr "" #. Tag: term -#: boot-installer.xml:2421 +#: boot-installer.xml:2412 #, no-c-format msgid "debian-installer/allow_unauthenticated" msgstr "debian-installer/allow_unauthenticated" #. Tag: para -#: boot-installer.xml:2422 +#: boot-installer.xml:2413 #, no-c-format msgid "" "By default the installer requires that repositories be authenticated using a " @@ -3246,13 +3234,13 @@ msgstr "" "emphasis>." #. Tag: term -#: boot-installer.xml:2433 +#: boot-installer.xml:2424 #, no-c-format msgid "ramdisk_size" msgstr "ramdisk_size" #. Tag: para -#: boot-installer.xml:2434 +#: boot-installer.xml:2425 #, no-c-format msgid "" "This parameter should already be set to a correct value where needed; set it " @@ -3264,13 +3252,13 @@ msgstr "" "muistilevyä voitu ladata kokonaan. Arvon yksikkö on kt." #. Tag: term -#: boot-installer.xml:2444 +#: boot-installer.xml:2435 #, no-c-format msgid "mouse/protocol" msgstr "mouse/protocol" #. Tag: para -#: boot-installer.xml:2445 +#: boot-installer.xml:2436 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can set the mouse protocol " @@ -3292,13 +3280,13 @@ msgstr "" "useimmissa tapauksissa." #. Tag: term -#: boot-installer.xml:2467 +#: boot-installer.xml:2458 #, no-c-format msgid "mouse/device" msgstr "mouse/device" #. Tag: para -#: boot-installer.xml:2468 +#: boot-installer.xml:2459 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can specify the mouse " @@ -3312,13 +3300,13 @@ msgstr "" "device=/dev/ttyS1." #. Tag: term -#: boot-installer.xml:2479 +#: boot-installer.xml:2470 #, no-c-format msgid "mouse/left" msgstr "mouse/left" #. Tag: para -#: boot-installer.xml:2480 +#: boot-installer.xml:2471 #, no-c-format msgid "" "For the gtk frontend (graphical installer), users can switch the mouse to " @@ -3330,13 +3318,13 @@ msgstr "" "userinput>." #. Tag: term -#: boot-installer.xml:2489 +#: boot-installer.xml:2480 #, no-c-format msgid "directfb/hw-accel" msgstr "directfb/hw-accel" #. Tag: para -#: boot-installer.xml:2490 +#: boot-installer.xml:2481 #, no-c-format msgid "" "For the gtk frontend (graphical installer), hardware acceleration in " @@ -3348,13 +3336,13 @@ msgstr "" "arvoksi true." #. Tag: term -#: boot-installer.xml:2500 +#: boot-installer.xml:2491 #, no-c-format msgid "rescue/enable" msgstr "rescue/enable" #. Tag: para -#: boot-installer.xml:2501 +#: boot-installer.xml:2492 #, no-c-format msgid "" "Set to true to enter rescue mode rather than " @@ -3364,13 +3352,13 @@ msgstr "" "eikä tavallinen asennus. Katso ." #. Tag: title -#: boot-installer.xml:2512 +#: boot-installer.xml:2503 #, no-c-format msgid "Using boot parameters to answer questions" msgstr "Valmiita vastauksia käynnistysparametreilla" #. Tag: para -#: boot-installer.xml:2513 +#: boot-installer.xml:2504 #, no-c-format msgid "" "With some exceptions, a value can be set at the boot prompt for any question " @@ -3385,27 +3373,27 @@ msgstr "" "tapauksista on seuraavassa luettelossa." #. Tag: term -#: boot-installer.xml:2525 +#: boot-installer.xml:2516 #, fuzzy, no-c-format #| msgid "debian-installer/locale (locale)" msgid "debian-installer/language (language)" msgstr "debian-installer/locale (locale)" #. Tag: term -#: boot-installer.xml:2526 +#: boot-installer.xml:2517 #, fuzzy, no-c-format #| msgid "debian-installer/theme (theme)" msgid "debian-installer/country (country)" msgstr "debian-installer/theme (theme)" #. Tag: term -#: boot-installer.xml:2527 +#: boot-installer.xml:2518 #, no-c-format msgid "debian-installer/locale (locale)" msgstr "debian-installer/locale (locale)" #. Tag: para -#: boot-installer.xml:2528 +#: boot-installer.xml:2519 #, no-c-format msgid "" "There are two ways to specify the language, country and locale to use for " @@ -3413,7 +3401,7 @@ msgid "" msgstr "" #. Tag: para -#: boot-installer.xml:2533 +#: boot-installer.xml:2524 #, no-c-format msgid "" "The first and easiest is to pass only the parameter localelanguage " @@ -3437,13 +3425,13 @@ msgid "" msgstr "" #. Tag: term -#: boot-installer.xml:2554 +#: boot-installer.xml:2545 #, no-c-format msgid "anna/choose_modules (modules)" msgstr "anna/choose_modules (modules)" #. Tag: para -#: boot-installer.xml:2555 +#: boot-installer.xml:2546 #, no-c-format msgid "" "Can be used to automatically load installer components that are not loaded " @@ -3460,7 +3448,7 @@ msgstr "" "\"pppoe\"/>)." #. Tag: para -#: boot-installer.xml:2569 +#: boot-installer.xml:2560 #, no-c-format msgid "" "Set to true if you want to disable DHCP and instead " @@ -3470,13 +3458,13 @@ msgstr "" "ja pakotetaan kiinteät verkkoasetukset." #. Tag: term -#: boot-installer.xml:2578 +#: boot-installer.xml:2569 #, no-c-format msgid "mirror/protocol (protocol)" msgstr "mirror/protocol (protocol)" #. Tag: para -#: boot-installer.xml:2579 +#: boot-installer.xml:2570 #, no-c-format msgid "" "By default the installer will use the http protocol to download files from " @@ -3494,13 +3482,13 @@ msgstr "" "on kirjoitettava itse." #. Tag: term -#: boot-installer.xml:2592 +#: boot-installer.xml:2583 #, no-c-format msgid "tasksel:tasksel/first (tasks)" msgstr "tasksel:tasksel/first (tasks)" #. Tag: para -#: boot-installer.xml:2593 +#: boot-installer.xml:2584 #, no-c-format msgid "" "Can be used to select tasks that are not available from the interactive task " @@ -3512,13 +3500,13 @@ msgstr "" "literal>. Katso lisätietoja kohdasta ." #. Tag: title -#: boot-installer.xml:2607 +#: boot-installer.xml:2598 #, no-c-format msgid "Passing parameters to kernel modules" msgstr "Parametrien välittäminen ytimen moduuleille" #. Tag: para -#: boot-installer.xml:2608 +#: boot-installer.xml:2599 #, no-c-format msgid "" "If drivers are compiled into the kernel, you can pass parameters to them as " @@ -3542,7 +3530,7 @@ msgstr "" "asennetun järjestelmän asetustiedostoihin." #. Tag: para -#: boot-installer.xml:2621 +#: boot-installer.xml:2612 #, no-c-format msgid "" "Note that it is now quite rare that parameters need to be passed to modules. " @@ -3556,7 +3544,7 @@ msgstr "" "kuitenkin olla välttämätöntä asettaa parametrien arvo itse." #. Tag: para -#: boot-installer.xml:2628 +#: boot-installer.xml:2619 #, no-c-format msgid "" "The syntax to use to set parameters for modules is: " @@ -3577,19 +3565,19 @@ msgstr "" "seuraavasti:" #. Tag: screen -#: boot-installer.xml:2638 +#: boot-installer.xml:2629 #, no-c-format msgid "3c509.xcvr=3 3c509.irq=10" msgstr "3c509.xcvr=3 3c509.irq=10" #. Tag: title -#: boot-installer.xml:2644 +#: boot-installer.xml:2635 #, no-c-format msgid "Blacklisting kernel modules" msgstr "Ytimen moduulien lisääminen kieltolistalle" #. Tag: para -#: boot-installer.xml:2645 +#: boot-installer.xml:2636 #, no-c-format msgid "" "Sometimes it may be necessary to blacklist a module to prevent it from being " @@ -3606,7 +3594,7 @@ msgstr "" "oikein jos ajurit aiheuttavat ristiriidan tai jos väärä ajuri ladataan ensin." #. Tag: para -#: boot-installer.xml:2654 +#: boot-installer.xml:2645 #, no-c-format msgid "" "You can blacklist a module using the following syntax: " @@ -3622,7 +3610,7 @@ msgstr "" "asennetussa järjestelmässä." #. Tag: para -#: boot-installer.xml:2662 +#: boot-installer.xml:2653 #, no-c-format msgid "" "Note that a module may still be loaded by the installation system itself. " @@ -3636,19 +3624,19 @@ msgstr "" "luettelosta." #. Tag: title -#: boot-installer.xml:2679 +#: boot-installer.xml:2670 #, no-c-format msgid "Troubleshooting the Installation Process" msgstr "Asennusprosessin vianetsintä" #. Tag: title -#: boot-installer.xml:2684 +#: boot-installer.xml:2675 #, no-c-format msgid "CD-ROM Reliability" msgstr "CD-levyjen luotettavuus" #. Tag: para -#: boot-installer.xml:2685 +#: boot-installer.xml:2676 #, no-c-format msgid "" "Sometimes, especially with older CD-ROM drives, the installer may fail to " @@ -3661,7 +3649,7 @@ msgstr "" "levyltä, se ei tunnista levyä tai asennuksen aikana tulee lukuvirheitä." #. Tag: para -#: boot-installer.xml:2692 +#: boot-installer.xml:2683 #, no-c-format msgid "" "There are many different possible causes for these problems. We can only " @@ -3672,13 +3660,13 @@ msgstr "" "yleisiä tapauksia ja yleisiä toimintaohjeita. Lopusta saat huolehtia itse." #. Tag: para -#: boot-installer.xml:2698 +#: boot-installer.xml:2689 #, no-c-format msgid "There are two very simple things that you should try first." msgstr "Ensiksi kannattaa kokeilla kahta hyvin yksinkertaista juttua." #. Tag: para -#: boot-installer.xml:2703 +#: boot-installer.xml:2694 #, no-c-format msgid "" "If the CD-ROM does not boot, check that it was inserted correctly and that " @@ -3688,7 +3676,7 @@ msgstr "" "ettei se ole likainen." #. Tag: para -#: boot-installer.xml:2709 +#: boot-installer.xml:2700 #, no-c-format msgid "" "If the installer fails to recognize a CD-ROM, try just running the option " @@ -3702,7 +3690,7 @@ msgstr "" "tunnetusti tällä tavalla." #. Tag: para -#: boot-installer.xml:2719 +#: boot-installer.xml:2710 #, no-c-format msgid "" "If this does not work, then try the suggestions in the subsections below. " @@ -3714,7 +3702,7 @@ msgstr "" "yksinkertaisuuden vuoksi termiä CD." #. Tag: para -#: boot-installer.xml:2725 +#: boot-installer.xml:2716 #, no-c-format msgid "" "If you cannot get the installation working from CD-ROM, try one of the other " @@ -3724,13 +3712,13 @@ msgstr "" "asennustapoja." #. Tag: title -#: boot-installer.xml:2733 +#: boot-installer.xml:2724 #, no-c-format msgid "Common issues" msgstr "Yleisiä pulmia" #. Tag: para -#: boot-installer.xml:2736 +#: boot-installer.xml:2727 #, no-c-format msgid "" "Some older CD-ROM drives do not support reading from discs that were burned " @@ -3740,7 +3728,7 @@ msgstr "" "nopeuksilla kirjoitettujen levyjen lukemista." #. Tag: para -#: boot-installer.xml:2742 +#: boot-installer.xml:2733 #, no-c-format msgid "" "If your system boots correctly from the CD-ROM, it does not necessarily mean " @@ -3752,7 +3740,7 @@ msgstr "" "johon CD-asema on kytketty)." #. Tag: para -#: boot-installer.xml:2749 +#: boot-installer.xml:2740 #, no-c-format msgid "" "Some older CD-ROM drives do not work correctly if direct memory " @@ -3762,19 +3750,19 @@ msgstr "" "quote> (DMA) on käytössä." #. Tag: title -#: boot-installer.xml:2760 +#: boot-installer.xml:2751 #, no-c-format msgid "How to investigate and maybe solve issues" msgstr "Miten pulmia tutkitaan ja ehkä selvitetään" #. Tag: para -#: boot-installer.xml:2761 +#: boot-installer.xml:2752 #, no-c-format msgid "If the CD-ROM fails to boot, try the suggestions listed below." msgstr "Jos CD-levy ei käynnisty, kokeile alla lueteltuja ehdotuksia." #. Tag: para -#: boot-installer.xml:2766 +#: boot-installer.xml:2757 #, no-c-format msgid "" "Check that your BIOS actually supports booting from CD-ROM (older systems " @@ -3784,7 +3772,7 @@ msgstr "" "luultavasti eivät tue) ja että CD-asema tukee käytettyä taltiota." #. Tag: para -#: boot-installer.xml:2772 +#: boot-installer.xml:2763 #, no-c-format msgid "" "If you downloaded an iso image, check that the md5sum of that image matches " @@ -3809,7 +3797,7 @@ msgstr "" "käyttää otoksen kokoa lukeakseen oikean määrän tavuja levyltä." #. Tag: screen -#: boot-installer.xml:2785 +#: boot-installer.xml:2776 #, no-c-format msgid "" "$ dd if=/dev/cdrom | \\\n" @@ -3831,7 +3819,7 @@ msgstr "" "134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s" #. Tag: para -#: boot-installer.xml:2790 +#: boot-installer.xml:2781 #, no-c-format msgid "" "If, after the installer has been booted successfully, the CD-ROM is not " @@ -3851,7 +3839,7 @@ msgstr "" "komentotulkki." #. Tag: para -#: boot-installer.xml:2802 +#: boot-installer.xml:2793 #, no-c-format msgid "" "Switch to VT4 or view the contents of /var/log/syslog " @@ -3864,7 +3852,7 @@ msgstr "" "tuloste." #. Tag: para -#: boot-installer.xml:2809 +#: boot-installer.xml:2800 #, no-c-format msgid "" "Check in the output of dmesg if your CD-ROM drive was " @@ -3894,7 +3882,7 @@ msgstr "" "lataamista itse komennolla modprobe." #. Tag: para -#: boot-installer.xml:2823 +#: boot-installer.xml:2814 #, no-c-format msgid "" "Check that there is a device node for your CD-ROM drive under /dev/" @@ -3906,7 +3894,7 @@ msgstr "" "filename>. Pitäisi olla myös /dev/cdrom." #. Tag: para -#: boot-installer.xml:2831 +#: boot-installer.xml:2822 #, no-c-format msgid "" "Use the mount command to check if the CD-ROM is already " @@ -3922,7 +3910,7 @@ msgstr "" "virheilmoituksia." #. Tag: para -#: boot-installer.xml:2841 +#: boot-installer.xml:2832 #, no-c-format msgid "" "Check if DMA is currently enabled: \n" @@ -3948,7 +3936,7 @@ msgstr "" "laitteen hakemistossa." #. Tag: para -#: boot-installer.xml:2856 +#: boot-installer.xml:2847 #, no-c-format msgid "" "If there are any problems during the installation, try checking the " @@ -3962,13 +3950,13 @@ msgstr "" "luettua luotettavasti." #. Tag: title -#: boot-installer.xml:2871 +#: boot-installer.xml:2862 #, no-c-format msgid "Floppy Disk Reliability" msgstr "Levykkeen luotettavuus" #. Tag: para -#: boot-installer.xml:2873 +#: boot-installer.xml:2864 #, no-c-format msgid "" "The biggest problem for people using floppy disks to install Debian seems to " @@ -3978,7 +3966,7 @@ msgstr "" "luotettavuus." #. Tag: para -#: boot-installer.xml:2878 +#: boot-installer.xml:2869 #, no-c-format msgid "" "The boot floppy is the floppy with the worst problems, because it is read by " @@ -3996,7 +3984,7 @@ msgstr "" "koskevien virheilmoitusten tulvana." #. Tag: para -#: boot-installer.xml:2887 +#: boot-installer.xml:2878 #, no-c-format msgid "" "If you are having the installation stall at a particular floppy, the first " @@ -4013,7 +4001,7 @@ msgstr "" "virheittä. Joskus kannattaa levyke kirjoittaa toisella koneella." #. Tag: para -#: boot-installer.xml:2896 +#: boot-installer.xml:2887 #, no-c-format msgid "" "One user reports he had to write the images to floppy threekolme kertaa ennen kuin yksi levyke vihdoin toimi." #. Tag: para -#: boot-installer.xml:2902 +#: boot-installer.xml:2893 #, no-c-format msgid "" "Normally you should not have to download a floppy image again, but if you " @@ -4036,7 +4024,7 @@ msgstr "" "tarkistamalla niiden md5sum-tarkistussummat." #. Tag: para -#: boot-installer.xml:2908 +#: boot-installer.xml:2899 #, no-c-format msgid "" "Other users have reported that simply rebooting a few times with the same " @@ -4048,13 +4036,13 @@ msgstr "" "viallisista laitteista tai laiteohjelmiston levykeajureista." #. Tag: title -#: boot-installer.xml:2917 +#: boot-installer.xml:2908 #, no-c-format msgid "Boot Configuration" msgstr "Käynnistysasetukset" #. Tag: para -#: boot-installer.xml:2919 +#: boot-installer.xml:2910 #, no-c-format msgid "" "If you have problems and the kernel hangs during the boot process, doesn't " @@ -4068,7 +4056,7 @@ msgstr "" "kohdassa ." #. Tag: para -#: boot-installer.xml:2926 +#: boot-installer.xml:2917 #, no-c-format msgid "" "Often, problems can be solved by removing add-ons and peripherals, and then " @@ -4080,7 +4068,7 @@ msgstr "" "äänikortit ja Plug-n-Play-laitteet ovat erityisiä ongelmapesiä." #. Tag: para -#: boot-installer.xml:2932 +#: boot-installer.xml:2923 #, no-c-format msgid "" "If you have a large amount of memory installed in your machine, more than " @@ -4094,13 +4082,13 @@ msgstr "" "userinput>." #. Tag: title -#: boot-installer.xml:2943 boot-installer.xml:3045 +#: boot-installer.xml:2934 boot-installer.xml:3036 #, no-c-format msgid "Common &arch-title; Installation Problems" msgstr "Yleisiä suoritinperheen &arch-title; asennuspulmia" #. Tag: para -#: boot-installer.xml:2944 +#: boot-installer.xml:2935 #, no-c-format msgid "" "There are some common installation problems that can be solved or avoided by " @@ -4110,7 +4098,7 @@ msgstr "" "asentimelle sopivia käynnistysparametreja." #. Tag: para -#: boot-installer.xml:2949 +#: boot-installer.xml:2940 #, no-c-format msgid "" "Some systems have floppies with inverted DCLs. If you receive " @@ -4122,7 +4110,7 @@ msgstr "" "kokeile parametria floppy=thinkpad." #. Tag: para -#: boot-installer.xml:2955 +#: boot-installer.xml:2946 #, no-c-format msgid "" "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk " @@ -4141,7 +4129,7 @@ msgstr "" "replaceable>,sektorit." #. Tag: para -#: boot-installer.xml:2964 +#: boot-installer.xml:2955 #, no-c-format msgid "" "If you have a very old machine, and the kernel hangs after saying " @@ -4155,7 +4143,7 @@ msgstr "" "tämän testin pois käytöstä." #. Tag: para -#: boot-installer.xml:2971 +#: boot-installer.xml:2962 #, no-c-format msgid "" "Some systems (especially laptops) that have a native resolution that is not " @@ -4182,7 +4170,7 @@ msgstr "" "fb=false." #. Tag: para -#: boot-installer.xml:2989 +#: boot-installer.xml:2980 #, no-c-format msgid "" "If your screen begins to show a weird picture while the kernel boots, eg. " @@ -4202,13 +4190,13 @@ msgstr "" "kohdasta ." #. Tag: title -#: boot-installer.xml:3003 +#: boot-installer.xml:2994 #, no-c-format msgid "System Freeze During the PCMCIA Configuration Phase" msgstr "Järjestelmä jumittuu PCMCIA:n asetuksia tehtäessä" #. Tag: para -#: boot-installer.xml:3004 +#: boot-installer.xml:2995 #, no-c-format msgid "" "Some laptop models produced by Dell are known to crash when PCMCIA device " @@ -4228,7 +4216,7 @@ msgstr "" "poistaa pulmia aiheuttavien osoitteiden arvoalue pois käytöstä." #. Tag: para -#: boot-installer.xml:3014 +#: boot-installer.xml:3005 #, no-c-format msgid "" "Alternatively, you can boot the installer in expert mode. You will then be " @@ -4251,13 +4239,13 @@ msgstr "" "asentimelle." #. Tag: title -#: boot-installer.xml:3031 +#: boot-installer.xml:3022 #, no-c-format msgid "System Freeze while Loading USB Modules" msgstr "Järjestelmä jumittuu ladattaessa USB-moduuleita" #. Tag: para -#: boot-installer.xml:3032 +#: boot-installer.xml:3023 #, no-c-format msgid "" "The kernel normally tries to install USB modules and the USB keyboard driver " @@ -4275,19 +4263,19 @@ msgstr "" "userinput>." #. Tag: para -#: boot-installer.xml:3046 +#: boot-installer.xml:3037 #, no-c-format msgid "There are some common installation problems that are worth mentioning." msgstr "Muutamat yleiset asennuspulmat kannattaa mainita." #. Tag: title -#: boot-installer.xml:3052 +#: boot-installer.xml:3043 #, no-c-format msgid "Misdirected video output" msgstr "Videosignaali väärään paikkaan" #. Tag: para -#: boot-installer.xml:3053 +#: boot-installer.xml:3044 #, no-c-format msgid "" "It is fairly common for &arch-title; to have two video cards in one machine, " @@ -4315,7 +4303,7 @@ msgstr "" "video=atyfb:off." #. Tag: para -#: boot-installer.xml:3067 +#: boot-installer.xml:3058 #, no-c-format msgid "" "Note that you may also have to manually add this parameter to the silo " @@ -4329,13 +4317,13 @@ msgstr "" "tiedostossa /etc/X11/xorg.conf." #. Tag: title -#: boot-installer.xml:3078 +#: boot-installer.xml:3069 #, no-c-format msgid "Failure to Boot or Install from CD-ROM" msgstr "Käynnistys tai asennus CD-levyltä ei toimi" #. Tag: para -#: boot-installer.xml:3079 +#: boot-installer.xml:3070 #, no-c-format msgid "" "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if " @@ -4347,7 +4335,7 @@ msgstr "" "aikana. Useimmat viat on raportoitu SunBlade-järjestelmistä." #. Tag: para -#: boot-installer.xml:3085 +#: boot-installer.xml:3076 #, no-c-format msgid "We recommend to install such systems by netbooting the installer." msgstr "" @@ -4355,13 +4343,13 @@ msgstr "" "verkosta." #. Tag: title -#: boot-installer.xml:3094 +#: boot-installer.xml:3085 #, no-c-format msgid "Interpreting the Kernel Startup Messages" msgstr "Ytimen käynnistysviestien tulkinta" #. Tag: para -#: boot-installer.xml:3096 +#: boot-installer.xml:3087 #, no-c-format msgid "" "During the boot sequence, you may see many messages in the form " @@ -4397,13 +4385,13 @@ msgstr "" "linkend=\"kernel-baking\"/>)." #. Tag: title -#: boot-installer.xml:3121 +#: boot-installer.xml:3112 #, no-c-format msgid "Reporting Installation Problems" msgstr "Asennuspulmista ilmoittaminen" #. Tag: para -#: boot-installer.xml:3122 +#: boot-installer.xml:3113 #, no-c-format msgid "" "If you get through the initial boot phase but cannot complete the install, " @@ -4422,7 +4410,7 @@ msgstr "" "vikailmoitukset, halunnet liittää nämä tiedot vikailmoitukseen." #. Tag: para -#: boot-installer.xml:3133 +#: boot-installer.xml:3124 #, no-c-format msgid "" "Other pertinent installation messages may be found in /var/log/ kun tietokone on käynnistynyt asennettuun järjestelmään." #. Tag: title -#: boot-installer.xml:3144 +#: boot-installer.xml:3135 #, no-c-format msgid "Submitting Installation Reports" msgstr "Asennusraporttien lähettäminen" #. Tag: para -#: boot-installer.xml:3145 +#: boot-installer.xml:3136 #, no-c-format msgid "" "If you still have problems, please submit an installation report. We also " @@ -4453,7 +4441,7 @@ msgstr "" "mahdollisimman paljon tietoa mahdollisimman monista laitteistokokoonpanoista." #. Tag: para -#: boot-installer.xml:3152 +#: boot-installer.xml:3143 #, no-c-format msgid "" "Note that your installation report will be published in the Debian Bug " @@ -4466,7 +4454,7 @@ msgstr "" "julkistamista et pane pahaksesi." #. Tag: para -#: boot-installer.xml:3158 +#: boot-installer.xml:3149 #, no-c-format msgid "" "If you have a working Debian system, the easiest way to send an installation " @@ -4485,7 +4473,7 @@ msgstr "" "reports." #. Tag: para -#: boot-installer.xml:3168 +#: boot-installer.xml:3159 #, no-c-format msgid "" "Alternatively you can use this template when filling out installation " diff --git a/po/fi/install-methods.po b/po/fi/install-methods.po index 28cd48386..578d2ac0a 100644 --- a/po/fi/install-methods.po +++ b/po/fi/install-methods.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: Debian Installation Guide install-methods\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2009-11-18 01:11+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-09-09 21:43+0300\n" "Last-Translator: Tapio Lehtonen \n" "Language-Team: Finnish \n" @@ -1580,25 +1580,25 @@ msgstr "" "kiintolevyn kuvakkeeseen." #. Tag: filename -#: install-methods.xml:1034 install-methods.xml:1372 +#: install-methods.xml:1034 install-methods.xml:1361 #, no-c-format msgid "vmlinux" msgstr "vmlinux" #. Tag: filename -#: install-methods.xml:1039 install-methods.xml:1377 +#: install-methods.xml:1039 install-methods.xml:1366 #, no-c-format msgid "initrd.gz" msgstr "initrd.gz" #. Tag: filename -#: install-methods.xml:1044 install-methods.xml:1382 +#: install-methods.xml:1044 install-methods.xml:1371 #, no-c-format msgid "yaboot" msgstr "yaboot" #. Tag: filename -#: install-methods.xml:1049 install-methods.xml:1387 +#: install-methods.xml:1049 install-methods.xml:1376 #, no-c-format msgid "yaboot.conf" msgstr "yaboot.conf" @@ -1732,21 +1732,29 @@ msgstr "" "tftpd-hpa." #. Tag: title -#: install-methods.xml:1142 +#: install-methods.xml:1141 #, no-c-format msgid "Setting up RARP server" msgstr "RARP-palvelimen asetukset" #. Tag: para -#: install-methods.xml:1143 -#, no-c-format +#: install-methods.xml:1142 +#, fuzzy, no-c-format +#| msgid "" +#| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " +#| "address) of the client computers to be installed. If you don't know this " +#| "information, you can pick it off the initial " +#| "OpenPROM boot messages, use the OpenBoot .enet-addr command, or boot into Rescue mode (e." +#| "g., from the rescue floppy) and use the command /sbin/ifconfig " +#| "eth0." msgid "" "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC " "address) of the client computers to be installed. If you don't know this " "information, you can pick it off the initial " "OpenPROM boot messages, use the OpenBoot .enet-addr " "command, or boot into Rescue mode (e.g., from the " -"rescue floppy) and use the command /sbin/ifconfig eth0ip addr show dev eth0." msgstr "" "RARP:n asetuksia varten on tiedettävä asennettavien asiakaskoneiden Ethernet-" @@ -1758,7 +1766,7 @@ msgstr "" "userinput>." #. Tag: para -#: install-methods.xml:1155 +#: install-methods.xml:1154 #, no-c-format msgid "" "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, " @@ -1784,123 +1792,13 @@ msgstr "" "käyttöjärjestelmässä SunOS 4 (Solaris 1)." #. Tag: title -#: install-methods.xml:1177 -#, no-c-format -msgid "Setting up a BOOTP server" -msgstr "BOOTP-palvelimen käyttöönotto" - -#. Tag: para -#: install-methods.xml:1178 -#, no-c-format -msgid "" -"There are two BOOTP servers available for GNU/Linux. The first is CMU " -"bootpd. The other is actually a DHCP server: ISC " -"dhcpd. In &debian; these are contained in the " -"bootp and dhcp3-server " -"packages respectively." -msgstr "" -"GNU/Linuxille on saatavilla kaksi BOOTP-palvelinta. Ensimmäinen on CMU " -"bootpd. Toinen on itse asiassa DHCP-palvelin: ISC " -"dhcpd. &debian;issa ne sisältyvät paketteihin " -"bootp ja dhcp3-server." - -#. Tag: para -#: install-methods.xml:1186 -#, no-c-format -msgid "" -"To use CMU bootpd, you must first uncomment (or add) the " -"relevant line in /etc/inetd.conf. On &debian;, you can " -"run update-inetd --enable bootps, then /" -"etc/init.d/inetd reload to do so. Just in case your BOOTP server " -"does not run Debian, the line in question should look like: " -"\n" -"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" -" Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " -"good old BSD printcap, termcap, " -"and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " -"Here is an example /etc/bootptab: " -"\n" -"client:\\\n" -" hd=/tftpboot:\\\n" -" bf=tftpboot.img:\\\n" -" ip=192.168.1.90:\\\n" -" sm=255.255.255.0:\\\n" -" sa=192.168.1.1:\\\n" -" ha=0123456789AB:\n" -" You will need to change at least the ha option, which specifies the hardware address of the client. The " -"bf option specifies the file a client should retrieve via " -"TFTP; see for more details. On SGI machines you can just enter the command monitor and type " -"printenv. The value of the eaddr variable is the machine's MAC address. " -msgstr "" -"Käytettäessä CMU bootpd:tä, on ensin poistettava " -"kommenttimerkki asiaankuuluvalta riviltä (tai lisättävä rivi) tiedostossa " -"/etc/inetd.conf. &debian;issa tämä voidaan tehdä " -"komennoilla update-inetd --enable bootps ja sitten " -"/etc/init.d/inetd reload. Siltä varalta ettei " -"käytettävässä BOOTP-palvelimessa ole Debiania, rivin pitäisi näyttää " -"tällaiselta: \n" -"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" -" Nyt on tehtävä tiedosto /etc/bootptab. Tiedostossa on sama tuttu ja kryptinen muoto kuin vanhassa kunnon " -"BSD:n tiedostoissa printcap, termcap, ja disktab. Katso tiedoston " -"bootptab man-sivulta lisätietoja. CMU bootpd:tä varten on tiedettävä asiakaskoneen Ethernetosoite (MAC). Tässä " -"on esimerkki tiedostosta /etc/bootptab: " -"\n" -"client:\\\n" -" hd=/tftpboot:\\\n" -" bf=tftpboot.img:\\\n" -" ip=192.168.1.90:\\\n" -" sm=255.255.255.0:\\\n" -" sa=192.168.1.1:\\\n" -" ha=0123456789AB:\n" -" On muutettava ainakin riviä ha, " -"joka määrittää asiakaskoneen MAC-osoitteen. Rivi bf määrittää " -"tiedoston, joka asiakaskoneen on noudettava TFTP:llä; katso tarkempaa tietoa " -"kohdasta . SGI-" -"koneilla voidaan käynnistää komentotulkki ja kirjoittaa printenv. Muuttujan eaddr arvo on koneen MAC-" -"osoite. " - -#. Tag: para -#: install-methods.xml:1219 -#, no-c-format -msgid "" -"By contrast, setting up BOOTP with ISC dhcpd is really " -"easy, because it treats BOOTP clients as a moderately special case of DHCP " -"clients. Some architectures require a complex configuration for booting " -"clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " -"adding the allow bootp directive to the configuration " -"block for the subnet containing the client in /etc/dhcp3/dhcpd." -"conf, and restart dhcpd with /etc/" -"init.d/dhcpd3-server restart." -msgstr "" -"Tähän verrattuna BOOTP:n asetusten tekeminen ISC dhcpd:" -"llä on todella helppoa, koska se käsittelee BOOTP-asiakkaat DHCP-asiakkaiden " -"erikoistapauksena. Joissakin suoritinperheissä on käytettävä monimutkaisia " -"asetuksia asiakkaiden käynnistämiseen BOOTP:llä. Jos koneesi on joku niistä, " -"lue . Muussa tapauksessa luultavasti riittää " -"direktiivin allow bootp lisääminen asiakaskoneen " -"aliverkon asetusten lohkoon tiedostossa /etc/dhcp3/dhcpd.conf ja dhcpd:n käynnistäminen uudelleen komennolla " -"/etc/init.d/dhcpd3-server restart." - -#. Tag: title -#: install-methods.xml:1241 +#: install-methods.xml:1175 #, no-c-format msgid "Setting up a DHCP server" msgstr "DHCP-palvelimen asetukset" #. Tag: para -#: install-methods.xml:1242 +#: install-methods.xml:1176 #, no-c-format msgid "" "One free software DHCP server is ISC dhcpd. For &debian;, " @@ -1914,7 +1812,7 @@ msgstr "" "filename>):" #. Tag: screen -#: install-methods.xml:1249 +#: install-methods.xml:1183 #, no-c-format msgid "" "option domain-name \"example.com\";\n" @@ -1958,7 +1856,7 @@ msgstr "" "}" #. Tag: para -#: install-methods.xml:1251 +#: install-methods.xml:1185 #, no-c-format msgid "" "In this example, there is one server servername " @@ -1976,7 +1874,7 @@ msgstr "" "nimi." #. Tag: para -#: install-methods.xml:1261 +#: install-methods.xml:1195 #, no-c-format msgid "" "After you have edited the dhcpd configuration file, " @@ -1987,13 +1885,13 @@ msgstr "" "userinput>." #. Tag: title -#: install-methods.xml:1269 +#: install-methods.xml:1203 #, no-c-format msgid "Enabling PXE Booting in the DHCP configuration" msgstr "PXE-käynnistyksen käyttöönotto DHCP-asetuksissa" #. Tag: para -#: install-methods.xml:1270 +#: install-methods.xml:1204 #, no-c-format msgid "" "Here is another example for a dhcp.conf using the Pre-" @@ -2064,33 +1962,142 @@ msgstr "" "ohjelmatiedosto (katso tuonnempana)." #. Tag: title -#: install-methods.xml:1286 +#: install-methods.xml:1224 +#, no-c-format +msgid "Setting up a BOOTP server" +msgstr "BOOTP-palvelimen käyttöönotto" + +#. Tag: para +#: install-methods.xml:1225 +#, no-c-format +msgid "" +"There are two BOOTP servers available for GNU/Linux. The first is CMU " +"bootpd. The other is actually a DHCP server: ISC " +"dhcpd. In &debian; these are contained in the " +"bootp and dhcp3-server " +"packages respectively." +msgstr "" +"GNU/Linuxille on saatavilla kaksi BOOTP-palvelinta. Ensimmäinen on CMU " +"bootpd. Toinen on itse asiassa DHCP-palvelin: ISC " +"dhcpd. &debian;issa ne sisältyvät paketteihin " +"bootp ja dhcp3-server." + +#. Tag: para +#: install-methods.xml:1233 +#, no-c-format +msgid "" +"To use CMU bootpd, you must first uncomment (or add) the " +"relevant line in /etc/inetd.conf. On &debian;, you can " +"run update-inetd --enable bootps, then /" +"etc/init.d/inetd reload to do so. Just in case your BOOTP server " +"does not run Debian, the line in question should look like: " +"\n" +"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" +" Now, you must create an /etc/bootptab file. This has the same sort of familiar and cryptic format as the " +"good old BSD printcap, termcap, " +"and disktab files. See the bootptab manual page for more information. For CMU bootpd, you will need to know the hardware (MAC) address of the client. " +"Here is an example /etc/bootptab: " +"\n" +"client:\\\n" +" hd=/tftpboot:\\\n" +" bf=tftpboot.img:\\\n" +" ip=192.168.1.90:\\\n" +" sm=255.255.255.0:\\\n" +" sa=192.168.1.1:\\\n" +" ha=0123456789AB:\n" +" You will need to change at least the ha option, which specifies the hardware address of the client. The " +"bf option specifies the file a client should retrieve via " +"TFTP; see for more details. On SGI machines you can just enter the command monitor and type " +"printenv. The value of the eaddr variable is the machine's MAC address. " +msgstr "" +"Käytettäessä CMU bootpd:tä, on ensin poistettava " +"kommenttimerkki asiaankuuluvalta riviltä (tai lisättävä rivi) tiedostossa " +"/etc/inetd.conf. &debian;issa tämä voidaan tehdä " +"komennoilla update-inetd --enable bootps ja sitten " +"/etc/init.d/inetd reload. Siltä varalta ettei " +"käytettävässä BOOTP-palvelimessa ole Debiania, rivin pitäisi näyttää " +"tällaiselta: \n" +"bootps dgram udp wait root /usr/sbin/bootpd bootpd -i -t 120\n" +" Nyt on tehtävä tiedosto /etc/bootptab. Tiedostossa on sama tuttu ja kryptinen muoto kuin vanhassa kunnon " +"BSD:n tiedostoissa printcap, termcap, ja disktab. Katso tiedoston " +"bootptab man-sivulta lisätietoja. CMU bootpd:tä varten on tiedettävä asiakaskoneen Ethernetosoite (MAC). Tässä " +"on esimerkki tiedostosta /etc/bootptab: " +"\n" +"client:\\\n" +" hd=/tftpboot:\\\n" +" bf=tftpboot.img:\\\n" +" ip=192.168.1.90:\\\n" +" sm=255.255.255.0:\\\n" +" sa=192.168.1.1:\\\n" +" ha=0123456789AB:\n" +" On muutettava ainakin riviä ha, " +"joka määrittää asiakaskoneen MAC-osoitteen. Rivi bf määrittää " +"tiedoston, joka asiakaskoneen on noudettava TFTP:llä; katso tarkempaa tietoa " +"kohdasta . SGI-" +"koneilla voidaan käynnistää komentotulkki ja kirjoittaa printenv. Muuttujan eaddr arvo on koneen MAC-" +"osoite. " + +#. Tag: para +#: install-methods.xml:1266 +#, no-c-format +msgid "" +"By contrast, setting up BOOTP with ISC dhcpd is really " +"easy, because it treats BOOTP clients as a moderately special case of DHCP " +"clients. Some architectures require a complex configuration for booting " +"clients via BOOTP. If yours is one of those, read the section . Otherwise you will probably be able to get away with simply " +"adding the allow bootp directive to the configuration " +"block for the subnet containing the client in /etc/dhcp3/dhcpd." +"conf, and restart dhcpd with /etc/" +"init.d/dhcpd3-server restart." +msgstr "" +"Tähän verrattuna BOOTP:n asetusten tekeminen ISC dhcpd:" +"llä on todella helppoa, koska se käsittelee BOOTP-asiakkaat DHCP-asiakkaiden " +"erikoistapauksena. Joissakin suoritinperheissä on käytettävä monimutkaisia " +"asetuksia asiakkaiden käynnistämiseen BOOTP:llä. Jos koneesi on joku niistä, " +"lue . Muussa tapauksessa luultavasti riittää " +"direktiivin allow bootp lisääminen asiakaskoneen " +"aliverkon asetusten lohkoon tiedostossa /etc/dhcp3/dhcpd.conf ja dhcpd:n käynnistäminen uudelleen komennolla " +"/etc/init.d/dhcpd3-server restart." + +#. Tag: title +#: install-methods.xml:1285 #, no-c-format msgid "Enabling the TFTP Server" msgstr "TFTP-palvelimen käyttöönotto" #. Tag: para -#: install-methods.xml:1287 +#: install-methods.xml:1286 #, no-c-format msgid "" "To get the TFTP server ready to go, you should first make sure that " -"tftpd is enabled. This is usually enabled by having " -"something like the following line in /etc/inetd.conf: " -"\n" -"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" -" Debian packages will in general set this up " -"correctly by default when they are installed." +"tftpd is enabled." msgstr "" -"Jotta TFTP-palvelin saataisiin toimintakuntoon, on ensin varmistettava " -"tftpd:n olevan käytettävissä. Tavallisesti se otetaan " -"käyttöön kirjoittamalla tämän tapaista tiedostoon /etc/inetd.conf: \n" -"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" -" Debianin paketit tekevät tämän asetuksen yleensä " -"oikein kun ne asennetaan." #. Tag: para -#: install-methods.xml:1299 +#: install-methods.xml:1291 +#, no-c-format +msgid "" +"In the case of tftpd-hpa there are two ways the " +"service can be run. It can be started on demand by the system's " +"inetd daemon, or it can be set up to run as an " +"independent daemon. Which of these methods is used is selected when the " +"package is installed and can be changed by reconfiguring the package." +msgstr "" + +#. Tag: para +#: install-methods.xml:1300 #, no-c-format msgid "" "Historically, TFTP servers used /tftpboot as directory " @@ -2109,40 +2116,18 @@ msgstr "" "asetusesimerkkejä vastaavasti." #. Tag: para -#: install-methods.xml:1309 +#: install-methods.xml:1310 #, no-c-format msgid "" -"Look in /etc/inetd.conf and remember the directory " -"which is used as the argument of in.tftpd " -" All in.tftpd alternatives available in Debian " -"should log TFTP requests to the system logs by default. Some of them support " -"a -v argument to increase verbosity. It is " -"recommended to check these log messages in case of boot problems as they are " -"a good starting point for diagnosing the cause of errors. ; you'll need that below. If you've had to change /etc/" -"inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run " -"/etc/init.d/inetd reload; on other machines, find out " -"the process ID for inetd, and run kill -HUP " -"inetd-pid." +"All in.tftpd alternatives available in Debian should log " +"TFTP requests to the system logs by default. Some of them support a " +"-v argument to increase verbosity. It is recommended " +"to check these log messages in case of boot problems as they are a good " +"starting point for diagnosing the cause of errors." msgstr "" -"Lue tiedosto /etc/inetd.conf ja muista in." -"tftpd:n parametrina oleva hakemistoKaikkien " -"Debianissa saatavilla olevien vaihtoehtoisten in.tftpd-" -"komentojen pitäisi lokata TFTP-pyynnöt oletuksena järjestelmän lokeihin. " -"Jotkin niistä tukevat valitsinta -v lisäämään lokiin " -"tulostettavaa tietoa. Näiden lokien tarkistusta suositellaan mikäli " -"käynnistysongelmia ilmenee koska ne ovat hyvä aloituskohta vikoja " -"jäljitettäessä. ; sitä tarvitaan tuonnempana. Jos " -"tiedostoa /etc/inetd.conf on jouduttu muuttamaan, on " -"käynnissä olevalle inetd-prosessille huomautettava " -"muutoksesta. Debian-koneella komennetaan /etc/init.d/inetd " -"reload; muilla koneilla etsitään prosessin inetd numero ja komennetaan kill -HUP inetd-pid." #. Tag: para -#: install-methods.xml:1329 +#: install-methods.xml:1318 #, no-c-format msgid "" "If you intend to install Debian on an SGI machine and your TFTP server is a " @@ -2173,13 +2158,13 @@ msgstr "" "palvelimen valitsee käyttämänsä lähdeporttit." #. Tag: title -#: install-methods.xml:1351 +#: install-methods.xml:1340 #, no-c-format msgid "Move TFTP Images Into Place" msgstr "Siirretään TFTP-otokset paikalleen" #. Tag: para -#: install-methods.xml:1352 +#: install-methods.xml:1341 #, no-c-format msgid "" "Next, place the TFTP boot image you need, as found in netboot on noudettava seuraavat tiedostot:" #. Tag: filename -#: install-methods.xml:1392 +#: install-methods.xml:1381 #, no-c-format msgid "boot.msg" msgstr "boot.msg" #. Tag: para -#: install-methods.xml:1397 +#: install-methods.xml:1386 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " @@ -2234,7 +2219,7 @@ msgstr "" "filename>." #. Tag: para -#: install-methods.xml:1405 +#: install-methods.xml:1394 #, no-c-format msgid "" "For PXE booting, everything you should need is set up in the " @@ -2251,13 +2236,13 @@ msgstr "" "ia64/elilo.efi." #. Tag: title -#: install-methods.xml:1417 +#: install-methods.xml:1406 #, no-c-format msgid "SPARC TFTP Booting" msgstr "SPARC:n käynnistys TFTP:llä" #. Tag: para -#: install-methods.xml:1418 +#: install-methods.xml:1407 #, no-c-format msgid "" "Some SPARC architectures add the subarchitecture names, such as " @@ -2288,7 +2273,7 @@ msgstr "" "nimen." #. Tag: para -#: install-methods.xml:1434 +#: install-methods.xml:1423 #, no-c-format msgid "" "If you've done all this correctly, giving the command boot netbootpd to supply the " @@ -2335,13 +2320,13 @@ msgstr "" "tiedostossa /etc/dhcpd.conf." #. Tag: title -#: install-methods.xml:1561 +#: install-methods.xml:1550 #, no-c-format msgid "Automatic Installation" msgstr "Automaattinen asennus" #. Tag: para -#: install-methods.xml:1562 +#: install-methods.xml:1551 #, no-c-format msgid "" "For installing on multiple computers it's possible to do fully automatic " @@ -2357,13 +2342,13 @@ msgstr "" "classname>, ja Debianin asennin itse." #. Tag: title -#: install-methods.xml:1575 +#: install-methods.xml:1564 #, no-c-format msgid "Automatic Installation Using the Debian Installer" msgstr "Automaattinen asennus Debianin asentimella" #. Tag: para -#: install-methods.xml:1576 +#: install-methods.xml:1565 #, no-c-format msgid "" "The Debian Installer supports automating installs via preconfiguration " @@ -2377,7 +2362,7 @@ msgstr "" "asennusprosessin aikana kysyttyihin kysymyksiin." #. Tag: para -#: install-methods.xml:1583 +#: install-methods.xml:1572 #, no-c-format msgid "" "Full documentation on preseeding including a working example that you can " @@ -2386,6 +2371,53 @@ msgstr "" "Kaikki ohjeet valmiista vastauksista mukaan lukien toimiva esimerkki jota " "voi muokata on ." +#~ msgid "" +#~ "To get the TFTP server ready to go, you should first make sure that " +#~ "tftpd is enabled. This is usually enabled by having " +#~ "something like the following line in /etc/inetd.conf: \n" +#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" +#~ " Debian packages will in general set this up " +#~ "correctly by default when they are installed." +#~ msgstr "" +#~ "Jotta TFTP-palvelin saataisiin toimintakuntoon, on ensin varmistettava " +#~ "tftpd:n olevan käytettävissä. Tavallisesti se otetaan " +#~ "käyttöön kirjoittamalla tämän tapaista tiedostoon /etc/inetd." +#~ "conf: \n" +#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n" +#~ " Debianin paketit tekevät tämän asetuksen " +#~ "yleensä oikein kun ne asennetaan." + +#~ msgid "" +#~ "Look in /etc/inetd.conf and remember the directory " +#~ "which is used as the argument of in.tftpd " +#~ " All in.tftpd alternatives available in Debian " +#~ "should log TFTP requests to the system logs by default. Some of them " +#~ "support a -v argument to increase verbosity. It is " +#~ "recommended to check these log messages in case of boot problems as they " +#~ "are a good starting point for diagnosing the cause of errors. ; you'll need that below. If you've had to change /etc/" +#~ "inetd.conf, you'll have to notify the running inetd process that the file has changed. On a Debian machine, run " +#~ "/etc/init.d/inetd reload; on other machines, find " +#~ "out the process ID for inetd, and run kill -" +#~ "HUP inetd-pid." +#~ msgstr "" +#~ "Lue tiedosto /etc/inetd.conf ja muista in." +#~ "tftpd:n parametrina oleva hakemistoKaikkien " +#~ "Debianissa saatavilla olevien vaihtoehtoisten in.tftpd-" +#~ "komentojen pitäisi lokata TFTP-pyynnöt oletuksena järjestelmän lokeihin. " +#~ "Jotkin niistä tukevat valitsinta -v lisäämään " +#~ "lokiin tulostettavaa tietoa. Näiden lokien tarkistusta suositellaan " +#~ "mikäli käynnistysongelmia ilmenee koska ne ovat hyvä aloituskohta vikoja " +#~ "jäljitettäessä. ; sitä tarvitaan tuonnempana. Jos " +#~ "tiedostoa /etc/inetd.conf on jouduttu muuttamaan, on " +#~ "käynnissä olevalle inetd-prosessille huomautettava " +#~ "muutoksesta. Debian-koneella komennetaan /etc/init.d/inetd " +#~ "reload; muilla koneilla etsitään prosessin inetd numero ja komennetaan kill -HUP inetd-" +#~ "pid." + #~ msgid "" #~ "The QNAP Turbo Station (TS-109, TS-209 and TS-409) requires a kernel and " #~ "ramdisk which can be obtained from &qnap-orion-firmware-img;. A script is " diff --git a/po/fi/using-d-i.po b/po/fi/using-d-i.po index cc40195fb..121921bab 100644 --- a/po/fi/using-d-i.po +++ b/po/fi/using-d-i.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Installation Guide using-d-i\n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2010-01-18 00:44+0000\n" +"POT-Creation-Date: 2010-02-24 01:12+0000\n" "PO-Revision-Date: 2009-09-09 21:50+0300\n" "Last-Translator: Tapio Lehtonen \n" "Language-Team: Finnish \n" @@ -3195,14 +3195,36 @@ msgstr "" "asennin valitse parhaiten laitteistolle sopivan ytimen. Käytettäessä " "pienempää prioriteettia ydin voidaan valita luettelosta." +#. Tag: para +#: using-d-i.xml:2004 +#, no-c-format +msgid "" +"When packages are installed using the package management system, it will by " +"default also install packages that are recommended by those packages. " +"Recommended packages are not strictly required for the core functionality of " +"the selected software, but they do enhance that software and should, in the " +"view of the package maintainers, normally be installed together with that " +"software." +msgstr "" + +#. Tag: para +#: using-d-i.xml:2014 +#, no-c-format +msgid "" +"For technical reasons packages installed during the installation of the base " +"system are installed without their Recommends. The rule " +"described above only takes effect after this point in the installation " +"process." +msgstr "" + #. Tag: title -#: using-d-i.xml:2009 +#: using-d-i.xml:2026 #, no-c-format msgid "Setting Up Users And Passwords" msgstr "Käyttäjät ja salasanat" #. Tag: para -#: using-d-i.xml:2010 +#: using-d-i.xml:2027 #, no-c-format msgid "" "After the base system has been installed, the installer will allow you to " @@ -3214,13 +3236,13 @@ msgstr "" "käyttäjätunnuksia voidaan luoda kun asennus on valmis." #. Tag: title -#: using-d-i.xml:2024 +#: using-d-i.xml:2041 #, no-c-format msgid "Set the Root Password" msgstr "Asetetaan pääkäyttäjän salasana" #. Tag: para -#: using-d-i.xml:2028 +#: using-d-i.xml:2045 #, no-c-format msgid "" "The root account is also called the super-" @@ -3233,7 +3255,7 @@ msgstr "" "järjestelmän ylläpitoon, ja vain kun se on välttämätöntä." #. Tag: para -#: using-d-i.xml:2036 +#: using-d-i.xml:2053 #, no-c-format msgid "" "Any password you create should contain at least 6 characters, and should " @@ -3249,7 +3271,7 @@ msgstr "" "henkilötietoja." #. Tag: para -#: using-d-i.xml:2044 +#: using-d-i.xml:2061 #, no-c-format msgid "" "If anyone ever tells you they need your root password, be extremely wary. " @@ -3261,13 +3283,13 @@ msgstr "" "muille kuin järjestelmän ylläpitäjille." #. Tag: title -#: using-d-i.xml:2054 +#: using-d-i.xml:2071 #, no-c-format msgid "Create an Ordinary User" msgstr "Luo tavallisen käyttäjän tunnus" #. Tag: para -#: using-d-i.xml:2056 +#: using-d-i.xml:2073 #, no-c-format msgid "" "The system will ask you whether you wish to create an ordinary user account " @@ -3281,7 +3303,7 @@ msgstr "" "henkilökohtaisena kirjautumistunnuksena." #. Tag: para -#: using-d-i.xml:2065 +#: using-d-i.xml:2082 #, no-c-format msgid "" "Why not? Well, one reason to avoid using root's privileges is that it is " @@ -3301,7 +3323,7 @@ msgstr "" "jos ei ole tehnyt ylläpitoa aiemmin." #. Tag: para -#: using-d-i.xml:2075 +#: using-d-i.xml:2092 #, no-c-format msgid "" "You will first be prompted for the user's full name. Then you'll be asked " @@ -3314,7 +3336,7 @@ msgstr "" "etunimi onkin oletusarvo. Lopuksi kirjoitetaan käyttäjälle salasana." #. Tag: para -#: using-d-i.xml:2082 +#: using-d-i.xml:2099 #, no-c-format msgid "" "If at any point after installation you would like to create another account, " @@ -3324,13 +3346,13 @@ msgstr "" "komentoa adduser." #. Tag: title -#: using-d-i.xml:2093 +#: using-d-i.xml:2110 #, no-c-format msgid "Installing Additional Software" msgstr "Asennetaan lisää ohjelmia" #. Tag: para -#: using-d-i.xml:2094 +#: using-d-i.xml:2111 #, no-c-format msgid "" "At this point you have a usable but limited system. Most users will want to " @@ -3345,13 +3367,13 @@ msgstr "" "tietokone tai verkkoyhteys on hidas." #. Tag: title -#: using-d-i.xml:2109 +#: using-d-i.xml:2126 #, no-c-format msgid "Configuring apt" msgstr "Tehdään apt:n asetukset" #. Tag: para -#: using-d-i.xml:2111 +#: using-d-i.xml:2128 #, no-c-format msgid "" "One of the tools used to install packages on a &debian; system is a program " @@ -3386,7 +3408,7 @@ msgstr "" "hallintaan." #. Tag: para -#: using-d-i.xml:2135 +#: using-d-i.xml:2152 #, no-c-format msgid "" "apt must be configured so that it knows from where to " @@ -3400,7 +3422,7 @@ msgstr "" "on valmis." #. Tag: para -#: using-d-i.xml:2142 +#: using-d-i.xml:2159 #, no-c-format msgid "" "If you are installing at default priority, the installer will largely take " @@ -3418,7 +3440,7 @@ msgstr "" "vakaata jakelua." #. Tag: para -#: using-d-i.xml:2151 +#: using-d-i.xml:2168 #, no-c-format msgid "" "If you are installing at a lower priority (e.g. in expert mode), you will be " @@ -3433,13 +3455,13 @@ msgstr "" "contrib ja non-free -osista. " #. Tag: title -#: using-d-i.xml:2162 +#: using-d-i.xml:2179 #, no-c-format msgid "Installing from more than one CD or DVD" msgstr "Asennus monelta CD- tai DVD-levyltä" #. Tag: para -#: using-d-i.xml:2164 +#: using-d-i.xml:2181 #, no-c-format msgid "" "If you are installing from a CD or a DVD that is part of a larger set, the " @@ -3453,7 +3475,7 @@ msgstr "" "olevia paketteja." #. Tag: para -#: using-d-i.xml:2171 +#: using-d-i.xml:2188 #, no-c-format msgid "" "If you do not have any additional CDs or DVDs, that is no problem: using " @@ -3468,7 +3490,7 @@ msgstr "" "valittaviin tehtäviin kuuluvia paketteja." #. Tag: para -#: using-d-i.xml:2179 +#: using-d-i.xml:2196 #, no-c-format msgid "" "Packages are included on CDs (and DVDs) in the order of their popularity. " @@ -3481,7 +3503,7 @@ msgstr "" "käyttävät kokoelman viimeisillä levyillä olevia paketteja." #. Tag: para -#: using-d-i.xml:2186 +#: using-d-i.xml:2203 #, no-c-format msgid "" "It also means that buying or downloading and burning a full CD set is just a " @@ -3498,7 +3520,7 @@ msgstr "" "tai ehkä kaksi ensimmäistä DVD:tä, riittää useimmille. " #. Tag: para -#: using-d-i.xml:2195 +#: using-d-i.xml:2212 #, no-c-format msgid "" "A good rule of thumb is that for a regular desktop installation (using the " @@ -3513,7 +3535,7 @@ msgstr "" "työpöytäympäristölle." #. Tag: para -#: using-d-i.xml:2203 +#: using-d-i.xml:2220 #, no-c-format msgid "" "If you do scan multiple CDs or DVDs, the installer will prompt you to " @@ -3530,13 +3552,13 @@ msgstr "" "mutta numerojärjestystä käyttämällä ei niin helposti sählää." #. Tag: title -#: using-d-i.xml:2216 +#: using-d-i.xml:2233 #, no-c-format msgid "Using a network mirror" msgstr "Asentaminen verkossa olevalta asennuspalvelimelta" #. Tag: para -#: using-d-i.xml:2218 +#: using-d-i.xml:2235 #, no-c-format msgid "" "One question that will be asked during most installs is whether or not to " @@ -3548,7 +3570,7 @@ msgstr "" "mutta on muutamia poikkeuksia. " #. Tag: para -#: using-d-i.xml:2224 +#: using-d-i.xml:2241 #, no-c-format msgid "" "If you are not installing from a full CD or DVD or " @@ -3566,7 +3588,7 @@ msgstr "" "työpöytä-tehtävää. " #. Tag: para -#: using-d-i.xml:2233 +#: using-d-i.xml:2250 #, no-c-format msgid "" "If you are installing from a single full CD or using a full CD image, using " @@ -3587,7 +3609,7 @@ msgstr "" "valikoiden. " #. Tag: para -#: using-d-i.xml:2244 +#: using-d-i.xml:2261 #, no-c-format msgid "" "If you are installing from a DVD or using a DVD image, any packages needed " @@ -3601,7 +3623,7 @@ msgstr "" "kerrottiin. Verkossa olevan asennuspalvelimen käyttö ei ole pakollista." #. Tag: para -#: using-d-i.xml:2251 +#: using-d-i.xml:2268 #, no-c-format msgid "" "One advantage of adding a network mirror is that updates that have occurred " @@ -3617,7 +3639,7 @@ msgstr "" "vakautta." #. Tag: para -#: using-d-i.xml:2258 +#: using-d-i.xml:2275 #, no-c-format msgid "" "In summary: selecting a network mirror is generally a good idea, except if " @@ -3632,26 +3654,26 @@ msgstr "" "Asennuspalvelinta käytettäessä noudettavan datan määrä riippuu siis" #. Tag: para -#: using-d-i.xml:2267 +#: using-d-i.xml:2284 #, no-c-format msgid "the tasks you select in the next step of the installation," msgstr "asennuksen seuraavassa vaiheessa valittavista tehtävistä" #. Tag: para -#: using-d-i.xml:2272 +#: using-d-i.xml:2289 #, no-c-format msgid "which packages are needed for those tasks," msgstr "noiden tehtävien tarvitsemista paketeista" #. Tag: para -#: using-d-i.xml:2277 +#: using-d-i.xml:2294 #, no-c-format msgid "" "which of those packages are present on the CDs or DVDs you have scanned, and" msgstr "mitkä noista paketeista ovat luetuilla CD- tai DVD-levyillä ja" #. Tag: para -#: using-d-i.xml:2282 +#: using-d-i.xml:2299 #, no-c-format msgid "" "whether any updated versions of packages included on the CDs or DVDs are " @@ -3663,7 +3685,7 @@ msgstr "" "tietoturvapäivitysten tai volatilepäivitysten palvelimelta)." #. Tag: para -#: using-d-i.xml:2291 +#: using-d-i.xml:2308 #, no-c-format msgid "" "Note that the last point means that, even if you choose not to use a network " @@ -3677,13 +3699,13 @@ msgstr "" "palvelimella ja nämä päivitykset on otettu käyttöön." #. Tag: title -#: using-d-i.xml:2307 +#: using-d-i.xml:2324 #, no-c-format msgid "Selecting and Installing Software" msgstr "Ohjelmien valinta ja asentaminen" #. Tag: para -#: using-d-i.xml:2309 +#: using-d-i.xml:2326 #, no-c-format msgid "" "During the installation process, you are given the opportunity to select " @@ -3700,7 +3722,7 @@ msgstr "" "nopeasti valmiiksi erilaisiin tehtäviin." #. Tag: para -#: using-d-i.xml:2318 +#: using-d-i.xml:2335 #, no-c-format msgid "" "So, you have the ability to choose tasks first, and " @@ -3734,7 +3756,7 @@ msgstr "" "tehtävien tilatarpeet." #. Tag: para -#: using-d-i.xml:2345 +#: using-d-i.xml:2362 #, no-c-format msgid "" "Some tasks may be pre-selected based on the characteristics of the computer " @@ -3746,7 +3768,7 @@ msgstr "" "Tässä kohtaa voi jopa poistaa valinnan kaikista tehtävistä." #. Tag: para -#: using-d-i.xml:2352 +#: using-d-i.xml:2369 #, no-c-format msgid "" "In the standard user interface of the installer, you can use the space bar " @@ -3756,7 +3778,7 @@ msgstr "" "välilyöntinäppäimellä." #. Tag: para -#: using-d-i.xml:2358 +#: using-d-i.xml:2375 #, no-c-format msgid "" "Unless you are using the special KDE or Xfce/LXDE CDs, the Desktop " @@ -3766,7 +3788,7 @@ msgstr "" "paitsi jos käytetään KDE:tä tai Xfce/LXDE:tä varten tehtyjä erikoislevyjä." #. Tag: para -#: using-d-i.xml:2363 +#: using-d-i.xml:2380 #, no-c-format msgid "" "It is not possible to interactively select a different desktop during the " @@ -3788,7 +3810,7 @@ msgstr "" "desktop=lxde." #. Tag: para -#: using-d-i.xml:2374 +#: using-d-i.xml:2391 #, no-c-format msgid "" "Some CD images (businesscard, netinst and DVD) also allow selection of the " @@ -3802,7 +3824,7 @@ msgstr "" "Alternative desktop environments." #. Tag: para -#: using-d-i.xml:2381 +#: using-d-i.xml:2398 #, no-c-format msgid "" "Note that this will only work if the packages needed for the desired desktop " @@ -3820,7 +3842,7 @@ msgstr "" "otosta tai mitä tahansa muuta asennustapaa." #. Tag: para -#: using-d-i.xml:2391 +#: using-d-i.xml:2408 #, no-c-format msgid "" "The various server tasks will install software roughly as follows. DNS " @@ -3840,7 +3862,7 @@ msgstr "" "classname>." #. Tag: para -#: using-d-i.xml:2402 +#: using-d-i.xml:2419 #, no-c-format msgid "" "The Standard system task will install any package that has a " @@ -3856,7 +3878,7 @@ msgstr "" "jos tiedät mitä teet ja haluat todella suppean järjestelmän." #. Tag: para -#: using-d-i.xml:2410 +#: using-d-i.xml:2427 #, no-c-format msgid "" "If during language selection a default locale other than the C." #. Tag: title -#: using-d-i.xml:2468 +#: using-d-i.xml:2485 #, no-c-format msgid "Detecting other operating systems" msgstr "Etsitään muita käyttöjärjestelmiä" #. Tag: para -#: using-d-i.xml:2470 +#: using-d-i.xml:2487 #, no-c-format msgid "" "Before a boot loader is installed, the installer will attempt to probe for " @@ -3965,7 +3987,7 @@ msgstr "" "myös tämän käyttöjärjestelmän käynnistyminen Debianin lisäksi." #. Tag: para -#: using-d-i.xml:2478 +#: using-d-i.xml:2495 #, no-c-format msgid "" "Note that multiple operating systems booting on a single machine is still " @@ -3981,13 +4003,13 @@ msgstr "" "alkulatausohjelman ohjeista etsittävä lisätietoa." #. Tag: title -#: using-d-i.xml:2496 +#: using-d-i.xml:2513 #, no-c-format msgid "palo-installer" msgstr "Käynnistyslataimen palo asennin" #. Tag: para -#: using-d-i.xml:2497 +#: using-d-i.xml:2514 #, no-c-format msgid "" "The bootloader on PA-RISC is palo. PALO is " @@ -4003,19 +4025,19 @@ msgstr "" "mahdollistaa PALO:n kyky lukea Linux-osioiden tiedostoja." #. Tag: para -#: using-d-i.xml:2506 +#: using-d-i.xml:2523 #, no-c-format msgid "hppa FIXME ( need more info )" msgstr "hppa KORJAAMUT ( tarvitaan lisätietoja )" #. Tag: title -#: using-d-i.xml:2518 +#: using-d-i.xml:2535 #, no-c-format msgid "Install the Grub Boot Loader on a Hard Disk" msgstr "Asennetaan käynnistyslatain GRUB kiintolevylle" #. Tag: para -#: using-d-i.xml:2520 +#: using-d-i.xml:2537 #, no-c-format msgid "" "The main &architecture; boot loader is called grub. Grub is a " @@ -4027,7 +4049,7 @@ msgstr "" "aloittelijoille että vanhoille parroille." #. Tag: para -#: using-d-i.xml:2526 +#: using-d-i.xml:2543 #, no-c-format msgid "" "By default, grub will be installed into the Master Boot Record (MBR), where " @@ -4039,7 +4061,7 @@ msgstr "" "Lisätietoja löytyy grub:n man-sivulta." #. Tag: para -#: using-d-i.xml:2532 +#: using-d-i.xml:2549 #, no-c-format msgid "" "If you do not want to install grub, use the &BTN-GOBACK; button to get to " @@ -4050,13 +4072,13 @@ msgstr "" "päävalikkoon, ja valitse siellä haluttu käynnistyslatain." #. Tag: title -#: using-d-i.xml:2545 +#: using-d-i.xml:2562 #, no-c-format msgid "Install the LILO Boot Loader on a Hard Disk" msgstr "Asennetaan käynnistyslatain LILO kiintolevylle" #. Tag: para -#: using-d-i.xml:2547 +#: using-d-i.xml:2564 #, no-c-format msgid "" "The second &architecture; boot loader is called LILO. It is " @@ -4073,7 +4095,7 @@ msgstr "" "howto;\">LILO mini-HOWTO." #. Tag: para -#: using-d-i.xml:2557 +#: using-d-i.xml:2574 #, no-c-format msgid "" "Currently the LILO installation will only create menu entries for other " @@ -4086,7 +4108,7 @@ msgstr "" "lisäämään rivit GNU/Linux- ja GNU/Hurd-järjestelmille asennuksen jälkeen." #. Tag: para -#: using-d-i.xml:2565 +#: using-d-i.xml:2582 #, no-c-format msgid "" "&d-i; offers you three choices on where to install the LILOLILO will take complete control of the boot " @@ -4110,13 +4132,13 @@ msgid "" msgstr "Komento LILO ohjaa käynnistyksen kokonaan." #. Tag: term -#: using-d-i.xml:2579 +#: using-d-i.xml:2596 #, no-c-format msgid "new Debian partition" msgstr "uusi Debianin osio" #. Tag: para -#: using-d-i.xml:2579 +#: using-d-i.xml:2596 #, no-c-format msgid "" "Choose this if you want to use another boot manager. LILO " @@ -4128,13 +4150,13 @@ msgstr "" "toissijaisena käynnistyslataimena." #. Tag: term -#: using-d-i.xml:2588 +#: using-d-i.xml:2605 #, no-c-format msgid "Other choice" msgstr "Muu valinta" #. Tag: para -#: using-d-i.xml:2588 +#: using-d-i.xml:2605 #, no-c-format msgid "" "Useful for advanced users who want to install LILO " @@ -4148,7 +4170,7 @@ msgstr "" "/dev/sda." #. Tag: para -#: using-d-i.xml:2598 +#: using-d-i.xml:2615 #, no-c-format msgid "" "If you can no longer boot into Windows 9x (or DOS) after this step, you'll " @@ -4164,13 +4186,13 @@ msgstr "" "käytettävä jotain muuta keinoa Debianin käynnistämiseen!" #. Tag: title -#: using-d-i.xml:2614 +#: using-d-i.xml:2631 #, no-c-format msgid "Install the ELILO Boot Loader on a Hard Disk" msgstr "Asennetaan käynnistyslatain ELILO kiintolevylle" #. Tag: para -#: using-d-i.xml:2616 +#: using-d-i.xml:2633 #, no-c-format msgid "" "The &architecture; boot loader is called elilo. It is modeled " @@ -4198,7 +4220,7 @@ msgstr "" "käynnistämään Linux-ytimen." #. Tag: para -#: using-d-i.xml:2632 +#: using-d-i.xml:2649 #, no-c-format msgid "" "The elilo configuration and installation is done as the last " @@ -4215,13 +4237,13 @@ msgstr "" "tiedostojärjestelmä." #. Tag: title -#: using-d-i.xml:2644 +#: using-d-i.xml:2661 #, no-c-format msgid "Choose the correct partition!" msgstr "Valitse oikea levyosio!" #. Tag: para -#: using-d-i.xml:2646 +#: using-d-i.xml:2663 #, no-c-format msgid "" "The criteria for selecting a partition is that it is FAT format filesystem " @@ -4240,13 +4262,13 @@ msgstr "" "tiedostojärjestelmän." #. Tag: title -#: using-d-i.xml:2661 +#: using-d-i.xml:2678 #, no-c-format msgid "EFI Partition Contents" msgstr "EFI-osion sisältö" #. Tag: para -#: using-d-i.xml:2663 +#: using-d-i.xml:2680 #, no-c-format msgid "" "The EFI partition is a FAT filesystem format partition on one of the hard " @@ -4286,13 +4308,13 @@ msgstr "" "niitä kertyy järjestelmää päivitettäessä tai asetuksia muokattaessa." #. Tag: filename -#: using-d-i.xml:2685 +#: using-d-i.xml:2702 #, no-c-format msgid "elilo.conf" msgstr "elilo.conf" #. Tag: para -#: using-d-i.xml:2686 +#: using-d-i.xml:2703 #, no-c-format msgid "" "This is the configuration file read by the boot loader when it starts. It is " @@ -4307,13 +4329,13 @@ msgstr "" "tiedostoihin." #. Tag: filename -#: using-d-i.xml:2695 +#: using-d-i.xml:2712 #, no-c-format msgid "elilo.efi" msgstr "elilo.efi" #. Tag: para -#: using-d-i.xml:2696 +#: using-d-i.xml:2713 #, no-c-format msgid "" "This is the boot loader program that the EFI Boot Manager " @@ -4327,13 +4349,13 @@ msgstr "" "valinta." #. Tag: filename -#: using-d-i.xml:2706 +#: using-d-i.xml:2723 #, no-c-format msgid "initrd.img" msgstr "initrd.img" #. Tag: para -#: using-d-i.xml:2707 +#: using-d-i.xml:2724 #, no-c-format msgid "" "This is the initial root filesystem used to boot the kernel. It is a copy of " @@ -4348,13 +4370,13 @@ msgstr "" "hakemistossa /boot." #. Tag: filename -#: using-d-i.xml:2719 +#: using-d-i.xml:2736 #, no-c-format msgid "readme.txt" msgstr "readme.txt" #. Tag: para -#: using-d-i.xml:2720 +#: using-d-i.xml:2737 #, no-c-format msgid "" "This is a small text file warning you that the contents of the directory are " @@ -4366,13 +4388,13 @@ msgstr "" "elilo suoritetaan seuraavan kerran." #. Tag: filename -#: using-d-i.xml:2730 +#: using-d-i.xml:2747 #, no-c-format msgid "vmlinuz" msgstr "vmlinuz" #. Tag: para -#: using-d-i.xml:2731 +#: using-d-i.xml:2748 #, no-c-format msgid "" "This is the compressed kernel itself. It is a copy of the file referenced in " @@ -4386,13 +4408,13 @@ msgstr "" "filename> osoitettu tiedosto hakemistossa /boot." #. Tag: title -#: using-d-i.xml:2751 +#: using-d-i.xml:2768 #, no-c-format msgid "arcboot-installer" msgstr "Käynnistyslataimen arcboot asennin" #. Tag: para -#: using-d-i.xml:2752 +#: using-d-i.xml:2769 #, no-c-format msgid "" "The boot loader on SGI machines is arcboot. It has to be " @@ -4437,13 +4459,13 @@ msgstr "" "sitten boot." #. Tag: replaceable -#: using-d-i.xml:2771 +#: using-d-i.xml:2788 #, no-c-format msgid "scsi" msgstr "scsi" #. Tag: para -#: using-d-i.xml:2772 +#: using-d-i.xml:2789 #, no-c-format msgid "" "is the SCSI bus to be booted from, this is 0 for the " @@ -4453,13 +4475,13 @@ msgstr "" "yhdysrakenteisille ohjaimille" #. Tag: replaceable -#: using-d-i.xml:2780 +#: using-d-i.xml:2797 #, no-c-format msgid "disk" msgstr "levy" #. Tag: para -#: using-d-i.xml:2781 +#: using-d-i.xml:2798 #, no-c-format msgid "" "is the SCSI ID of the hard disk on which arcboot is " @@ -4467,13 +4489,13 @@ msgid "" msgstr "on SCSI ID sille levylle johon arcboot on asennettu" #. Tag: replaceable -#: using-d-i.xml:2789 +#: using-d-i.xml:2806 #, no-c-format msgid "partnr" msgstr "partnr" #. Tag: para -#: using-d-i.xml:2790 +#: using-d-i.xml:2807 #, no-c-format msgid "" "is the number of the partition on which /etc/arcboot.conf/etc/arcboot.conf sijaitsee" #. Tag: replaceable -#: using-d-i.xml:2798 +#: using-d-i.xml:2815 #, no-c-format msgid "config" msgstr "config" #. Tag: para -#: using-d-i.xml:2799 +#: using-d-i.xml:2816 #, no-c-format msgid "" "is the name of the configuration entry in /etc/arcboot.conflinux." #. Tag: title -#: using-d-i.xml:2820 +#: using-d-i.xml:2837 #, no-c-format msgid "Install Yaboot on a Hard Disk" msgstr "Asennetaan käynnistyslatain Yaboot kiintolevylle" #. Tag: para -#: using-d-i.xml:2821 +#: using-d-i.xml:2838 #, no-c-format msgid "" "Newer (mid 1998 and on) PowerMacs use yaboot as their " @@ -4524,13 +4546,13 @@ msgstr "" "käynnistämään &debian;." #. Tag: title -#: using-d-i.xml:2839 +#: using-d-i.xml:2856 #, no-c-format msgid "Install Quik on a Hard Disk" msgstr "Asennetaan käynnistyslatain Quik kiintolevylle" #. Tag: para -#: using-d-i.xml:2840 +#: using-d-i.xml:2857 #, no-c-format msgid "" "The boot loader for OldWorld Power Macintosh machines is quikzipl-installer" msgstr "Käynnistyslataimen zipl asennin" #. Tag: para -#: using-d-i.xml:2857 +#: using-d-i.xml:2874 #, no-c-format msgid "" "The boot loader on &arch-title; is zipl. ZIPLZIPL enemmän." #. Tag: title -#: using-d-i.xml:2874 +#: using-d-i.xml:2891 #, no-c-format msgid "Install the SILO Boot Loader on a Hard Disk" msgstr "Asennetaan käynnistyslatain SILO kiintolevylle" #. Tag: para -#: using-d-i.xml:2876 +#: using-d-i.xml:2893 #, no-c-format msgid "" "The standard &architecture; boot loader is called silo. It is " @@ -4604,13 +4626,13 @@ msgstr "" "SunOS/Solaris-asennuksen rinnalle." #. Tag: title -#: using-d-i.xml:2901 +#: using-d-i.xml:2918 #, no-c-format msgid "Continue Without Boot Loader" msgstr "Jatketaan ilman käynnistyslatainta" #. Tag: para -#: using-d-i.xml:2903 +#: using-d-i.xml:2920 #, no-c-format msgid "" "This option can be used to complete the installation even when no boot " @@ -4623,7 +4645,7 @@ msgstr "" "(esim. käytetään jo asennettua käynnistyslatainta)." #. Tag: para -#: using-d-i.xml:2910 +#: using-d-i.xml:2927 #, no-c-format msgid "" "If you plan to manually configure your bootloader, you should check the name " @@ -4644,13 +4666,13 @@ msgstr "" "osio." #. Tag: title -#: using-d-i.xml:2927 +#: using-d-i.xml:2944 #, no-c-format msgid "Finishing the Installation" msgstr "Päätetään asennus" #. Tag: para -#: using-d-i.xml:2928 +#: using-d-i.xml:2945 #, no-c-format msgid "" "This is the last step in the Debian installation process during which the " @@ -4661,13 +4683,13 @@ msgstr "" "tehtävät. Pääasiassa siistitään työn jälkiä jotka &d-i; jätti." #. Tag: title -#: using-d-i.xml:2941 +#: using-d-i.xml:2958 #, no-c-format msgid "Setting the System Clock" msgstr "Tehdään kellon asetukset" #. Tag: para -#: using-d-i.xml:2943 +#: using-d-i.xml:2960 #, no-c-format msgid "" "The installer may ask you if the computer's clock is set to UTC. Normally " @@ -4680,7 +4702,7 @@ msgstr "" "käyttöjärjestelmien perusteella onko kello maailmanajassa." #. Tag: para -#: using-d-i.xml:2950 +#: using-d-i.xml:2967 #, no-c-format msgid "" "In expert mode you will always be able to choose whether or not the clock is " @@ -4699,7 +4721,7 @@ msgstr "" "paikallinen aika." #. Tag: para -#: using-d-i.xml:2961 +#: using-d-i.xml:2978 #, no-c-format msgid "" "At this point &d-i; will also attempt to save the current time to the " @@ -4711,13 +4733,13 @@ msgstr "" "tehdyn valinnan mukaiseti." #. Tag: title -#: using-d-i.xml:2976 +#: using-d-i.xml:2993 #, no-c-format msgid "Reboot the System" msgstr "Järjestelmän uudelleenkäynnistys" #. Tag: para -#: using-d-i.xml:2978 +#: using-d-i.xml:2995 #, no-c-format msgid "" "You will be prompted to remove the boot media (CD, floppy, etc) that you " @@ -4728,7 +4750,7 @@ msgstr "" "jälkeen laite käynnistetään uudelleen uuteen Debian-järjestelmään." #. Tag: para -#: using-d-i.xml:2984 +#: using-d-i.xml:3001 #, no-c-format msgid "" "After a final prompt the system will be halted because rebooting is not " @@ -4742,13 +4764,13 @@ msgstr "" "juuritiedostojärjestelmäksi asennuksen ensimmäisten vaiheiden aikana." #. Tag: title -#: using-d-i.xml:2997 +#: using-d-i.xml:3014 #, no-c-format msgid "Miscellaneous" msgstr "Sekalaista" #. Tag: para -#: using-d-i.xml:2998 +#: using-d-i.xml:3015 #, no-c-format msgid "" "The components listed in this section are usually not involved in the " @@ -4759,13 +4781,13 @@ msgstr "" "ovat käytettävissä jos jotain menee pieleen." #. Tag: title -#: using-d-i.xml:3011 +#: using-d-i.xml:3028 #, no-c-format msgid "Saving the installation logs" msgstr "Asentimen lokien tallentaminen" #. Tag: para -#: using-d-i.xml:3013 +#: using-d-i.xml:3030 #, no-c-format msgid "" "If the installation is successful, the logfiles created during the " @@ -4777,7 +4799,7 @@ msgstr "" "installer/." #. Tag: para -#: using-d-i.xml:3020 +#: using-d-i.xml:3037 #, no-c-format msgid "" "Choosing Save debug logs from the main menu " @@ -4793,13 +4815,13 @@ msgstr "" "tai liittää lokit asennusraporttiin." #. Tag: title -#: using-d-i.xml:3040 +#: using-d-i.xml:3057 #, no-c-format msgid "Using the Shell and Viewing the Logs" msgstr "Komentotulkin käyttö ja lokien lukeminen" #. Tag: para -#: using-d-i.xml:3042 +#: using-d-i.xml:3059 #, no-c-format msgid "" "There are several methods you can use to get a shell while running an " @@ -4825,14 +4847,14 @@ msgstr "" "F1." #. Tag: para -#: using-d-i.xml:3060 +#: using-d-i.xml:3077 #, no-c-format msgid "For the graphical installer see also ." msgstr "" "Graafista asenninta käytettäessä katso myös ." #. Tag: para -#: using-d-i.xml:3064 +#: using-d-i.xml:3081 #, no-c-format msgid "" "If you cannot switch consoles, there is also an Execute a " @@ -4848,7 +4870,7 @@ msgstr "" "komentotulkin." #. Tag: para -#: using-d-i.xml:3072 +#: using-d-i.xml:3089 #, no-c-format msgid "" "At this point you are booted from the RAM disk, and there is a limited set " @@ -4866,7 +4888,7 @@ msgstr "" "tekstintäydennys ja komentohistoria." #. Tag: para -#: using-d-i.xml:3081 +#: using-d-i.xml:3098 #, no-c-format msgid "" "To edit and view files, use the text editor nano. Log " @@ -4878,7 +4900,7 @@ msgstr "" "filename>." #. Tag: para -#: using-d-i.xml:3088 +#: using-d-i.xml:3105 #, no-c-format msgid "" "Although you can do basically anything in a shell that the available " @@ -4890,7 +4912,7 @@ msgstr "" "käytettäväksi jos jokin menee vikaan ja virheenjäljitykseen." #. Tag: para -#: using-d-i.xml:3094 +#: using-d-i.xml:3111 #, no-c-format msgid "" "Doing things manually from the shell may interfere with the installation " @@ -4904,13 +4926,13 @@ msgstr "" "komentotulkissa." #. Tag: title -#: using-d-i.xml:3109 +#: using-d-i.xml:3126 #, no-c-format msgid "Installation Over the Network" msgstr "Etäasennus" #. Tag: para -#: using-d-i.xml:3111 +#: using-d-i.xml:3128 #, no-c-format msgid "" "One of the more interesting components is network-console.)" #. Tag: para -#: using-d-i.xml:3121 +#: using-d-i.xml:3138 #, no-c-format msgid "" "This component is not loaded into the main installation menu by default, so " @@ -4949,7 +4971,7 @@ msgstr "" "SSH:ta.." #. Tag: para -#: using-d-i.xml:3134 +#: using-d-i.xml:3151 #, no-c-format msgid "" "For installations on &arch-title;, this is the default method after setting " @@ -4959,7 +4981,7 @@ msgstr "" "tultua tehdyksi." #. Tag: para -#: using-d-i.xml:3139 +#: using-d-i.xml:3156 #, no-c-format msgid "" "After selecting this new entry, you " @@ -4981,7 +5003,7 @@ msgstr "" "tietoturvallisesti etäasennuksen tekevälle henkilölle." #. Tag: para -#: using-d-i.xml:3151 +#: using-d-i.xml:3168 #, no-c-format msgid "" "Should you decide to continue with the installation locally, you can always " @@ -4993,7 +5015,7 @@ msgstr "" "toinen asentimen osa." #. Tag: para -#: using-d-i.xml:3157 +#: using-d-i.xml:3174 #, no-c-format msgid "" "Now let's switch to the other side of the wire. As a prerequisite, you need " @@ -5025,7 +5047,7 @@ msgstr "" "on vahvistettava se oikeaksi." #. Tag: para -#: using-d-i.xml:3174 +#: using-d-i.xml:3191 #, no-c-format msgid "" "The ssh server in the installer uses a default " @@ -5049,7 +5071,7 @@ msgstr "" "voiko asennusta jatkaa kun yhteys on muodostettu uudelleen." #. Tag: para -#: using-d-i.xml:3187 +#: using-d-i.xml:3204 #, no-c-format msgid "" "You may be able to avoid the connection being dropped by adding the option " @@ -5071,7 +5093,7 @@ msgstr "" "muuten toipunut). Sitä oli siis käytettävä vain tarvittaessa." #. Tag: para -#: using-d-i.xml:3200 +#: using-d-i.xml:3217 #, no-c-format msgid "" "If you install several computers in turn and they happen to have the same IP " @@ -5095,7 +5117,7 @@ msgstr "" "ja yrittää uudelleen." #. Tag: para -#: using-d-i.xml:3216 +#: using-d-i.xml:3233 #, no-c-format msgid "" "After the login you will be presented with an initial screen where you have " @@ -5115,7 +5137,7 @@ msgstr "" "useampia." #. Tag: para -#: using-d-i.xml:3226 +#: using-d-i.xml:3243 #, no-c-format msgid "" "After you have started the installation remotely over SSH, you should not go " @@ -5131,13 +5153,13 @@ msgstr "" "järjestelmä toimii huonosti." #. Tag: title -#: using-d-i.xml:3246 +#: using-d-i.xml:3263 #, no-c-format msgid "Loading Missing Firmware" msgstr "Puuttuvan laitetiedoston lataaminen" #. Tag: para -#: using-d-i.xml:3247 +#: using-d-i.xml:3264 #, no-c-format msgid "" "As described in , some devices require " @@ -5152,7 +5174,7 @@ msgstr "" "lisäominaisuuksien saamiseen käyttöön." #. Tag: para -#: using-d-i.xml:3255 +#: using-d-i.xml:3272 #, no-c-format msgid "" "If a device driver requests firmware that is not available, &d-i; will " @@ -5170,7 +5192,7 @@ msgstr "" "lib/firmware) ja laiteajuria vastaava moduuli ladataan uudelleen." #. Tag: para -#: using-d-i.xml:3265 +#: using-d-i.xml:3282 #, no-c-format msgid "" "Which devices are scanned and which file systems are supported depends on " @@ -5188,7 +5210,7 @@ msgstr "" "laiteohjelmisto voidaan ladata myös MMC- tai SD-kortilta." #. Tag: para -#: using-d-i.xml:3275 +#: using-d-i.xml:3292 #, no-c-format msgid "" "Note that it is possible to skip loading the firmware if you know the device " @@ -5199,7 +5221,7 @@ msgstr "" "laite toimii ilmankin tai jos laitetta ei tarvita asennuksen aikana." #. Tag: para -#: using-d-i.xml:3282 +#: using-d-i.xml:3299 #, no-c-format msgid "" "Support for loading firmware is still relatively basic and is likely to be " @@ -5216,13 +5238,13 @@ msgstr "" "\"submit-bug\"/>)." #. Tag: title -#: using-d-i.xml:3293 +#: using-d-i.xml:3310 #, no-c-format msgid "Preparing a medium" msgstr "Taltion valmistelu" #. Tag: para -#: using-d-i.xml:3294 +#: using-d-i.xml:3311 #, no-c-format msgid "" "Although in some cases the firmware can also be loaded from a partition on a " @@ -5242,7 +5264,7 @@ msgstr "" "tuettu asennuksen ensimmäisten vaiheiden aikana." #. Tag: para -#: using-d-i.xml:3304 +#: using-d-i.xml:3321 #, no-c-format msgid "" "Tarballs containing current packages for the most common firmware are " @@ -5257,7 +5279,7 @@ msgstr "" "vastaava tar-tiedosto ja pura se taltion tiedostojärjestelmään." #. Tag: para -#: using-d-i.xml:3318 +#: using-d-i.xml:3335 #, no-c-format msgid "" "If the firmware you need is not included in the tarball, you can also " @@ -5274,7 +5296,7 @@ msgstr "" "laiteohjelmistopaketteja." #. Tag: para -#: using-d-i.xml:3332 +#: using-d-i.xml:3349 #, no-c-format msgid "" "It is also possible to copy individual firmware files to the medium. Loose " @@ -5286,13 +5308,13 @@ msgstr "" "laitevalmistajalta." #. Tag: title -#: using-d-i.xml:3341 +#: using-d-i.xml:3358 #, no-c-format msgid "Firmware and the Installed System" msgstr "Laiteohjelmisto ja asennettu järjestelmä" #. Tag: para -#: using-d-i.xml:3342 +#: using-d-i.xml:3359 #, no-c-format msgid "" "Any firmware loaded during the installation will be copied automatically to " @@ -5310,7 +5332,7 @@ msgstr "" "laiteohjelmistoa voida ladata versioerojen vuoksi." #. Tag: para -#: using-d-i.xml:3351 +#: using-d-i.xml:3368 #, no-c-format msgid "" "If the firmware was loaded from a firmware package, &d-i; will also install " @@ -5326,7 +5348,7 @@ msgstr "" "automaattisesti jos uusi versio julkaistaan." #. Tag: para -#: using-d-i.xml:3359 +#: using-d-i.xml:3376 #, no-c-format msgid "" "If loading the firmware was skipped during the installation, the relevant " @@ -5338,7 +5360,7 @@ msgstr "" "laiteohjelmistopaketti) on asennettu käyttäjän toimesta." #. Tag: para -#: using-d-i.xml:3366 +#: using-d-i.xml:3383 #, no-c-format msgid "" "If the firmware was loaded from loose firmware files, the firmware copied to " -- cgit v1.2.3