From 74e594185d4421e862806c29fc0519dd337f1229 Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Sun, 19 Mar 2006 13:43:49 +0000
Subject: Update of original English docs

---
 nl/boot-installer/mips.xml   | 16 ++++++++--------
 nl/boot-installer/mipsel.xml |  8 ++++----
 2 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'nl/boot-installer')

diff --git a/nl/boot-installer/mips.xml b/nl/boot-installer/mips.xml
index f237aa957..f628be2c9 100644
--- a/nl/boot-installer/mips.xml
+++ b/nl/boot-installer/mips.xml
@@ -1,11 +1,11 @@
 <!-- retain these comments for translator revision tracking -->
-<!-- original version: 24663 untranslated -->
+<!-- original version: 35613 untranslated -->
 
 
   <sect2 arch="mips" id="boot-tftp"><title>Booting with TFTP</title>
 
    <sect3>
-   <title>SGI Indys TFTP Booting</title>
+   <title>SGI TFTP Booting</title>
 <para>
 
 After entering the command monitor use
@@ -14,7 +14,7 @@ After entering the command monitor use
 bootp():
 </screen></informalexample>
 
-on SGI Indys to boot linux and to begin installation of the Debian
+on SGI machines to boot linux and to begin installation of the Debian
 Software.  In order to make this
 work you may have to unset the <envar>netaddr</envar> environment
 variable. Type
@@ -29,10 +29,10 @@ in the command monitor to do this.
   </sect3>
 
    <sect3>
-   <title>Broadcom BCM91250A TFTP Booting</title>
+   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
 <para>
 
-On the Broadcom BCM91250A evaluation board, you have to load the SiByl boot
+On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
 loader via TFTP which will then load and start the Debian installer.  In
 most cases, you will first obtain an IP address via DHCP but it is also
 possible to configure a static address.  In order to use DHCP, you can
@@ -60,10 +60,10 @@ command, the installer will be loaded automatically.
   <sect2 arch="mips"><title>Boot Parameters</title>
 
    <sect3>
-   <title>SGI Indys TFTP Booting</title>
+   <title>SGI TFTP Booting</title>
 <para>
 
-On SGI Indys you can append boot parameters to the
+On SGI machines you can append boot parameters to the
 <command>bootp():</command> command in the command monitor.
 
 </para><para>
@@ -86,7 +86,7 @@ bootp(): append="root=/dev/sda1"
   </sect3>
 
    <sect3>
-   <title>Broadcom BCM91250A TFTP Booting</title>
+   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
 <para>
 
 You cannot pass any boot parameters directly from the CFE prompt.  Instead,
diff --git a/nl/boot-installer/mipsel.xml b/nl/boot-installer/mipsel.xml
index a059ba7ce..69245e3fd 100644
--- a/nl/boot-installer/mipsel.xml
+++ b/nl/boot-installer/mipsel.xml
@@ -1,5 +1,5 @@
 <!-- retain these comments for translator revision tracking -->
-<!-- original version: 35328 untranslated -->
+<!-- original version: 35612 untranslated -->
 
   <sect2 arch="mipsel" id="boot-tftp"><title>Booting with TFTP</title>
 
@@ -39,10 +39,10 @@ they have no serial port.
 
    <sect3>
 <!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A TFTP Booting</title>
+   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
 <para>
 
-On the Broadcom BCM91250A evaluation board, you have to load the SiByl boot
+On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
 loader via TFTP which will then load and start the Debian installer.  In
 most cases, you will first obtain an IP address via DHCP but it is also
 possible to configure a static address.  In order to use DHCP, you can
@@ -82,7 +82,7 @@ add your parameters to the <replaceable>args</replaceable> variable.
 
    <sect3>
 <!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A TFTP Booting</title>
+   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
 <para>
 
 You cannot pass any boot parameters directly from the CFE prompt.  Instead,
-- 
cgit v1.2.3