From 5937d2ceb1dc31bd1a6736a5c84a867a554d2f57 Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Sun, 2 Aug 2009 09:08:59 +0000
Subject: Dutch translation update

---
 nl/boot-installer/mipsel.xml | 43 +------------------------------------------
 1 file changed, 1 insertion(+), 42 deletions(-)

(limited to 'nl/boot-installer/mipsel.xml')

diff --git a/nl/boot-installer/mipsel.xml b/nl/boot-installer/mipsel.xml
index 4249e5b4c..7680c9cdb 100644
--- a/nl/boot-installer/mipsel.xml
+++ b/nl/boot-installer/mipsel.xml
@@ -1,5 +1,5 @@
 <!-- retain these comments for translator revision tracking -->
-<!-- original version: 58447 untranslated -->
+<!-- original version: 59840 untranslated -->
 
   <sect2 arch="mipsel" id="boot-tftp"><title>Booting with TFTP</title>
 
@@ -36,34 +36,6 @@ this way.
 </para>
   </sect3>
 
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
-loader via TFTP which will then load and start the Debian installer.  In
-most cases, you will first obtain an IP address via DHCP but it is also
-possible to configure a static address.  In order to use DHCP, you can
-enter the following command on the CFE prompt:
-
-<informalexample><screen>
-ifconfig eth0 -auto
-</screen></informalexample>
-
-Once you have obtained an IP address, you can load SiByl with the following
-command:
-
-<informalexample><screen>
-boot 192.168.1.1:/boot/sibyl
-</screen></informalexample>
-
-You need to substitute the IP address listed in this example with either
-the name or the IP address of your TFTP server.  Once you issue this
-command, the installer will be loaded automatically.
-
-</para>
-</sect3>
   </sect2>
 
   <sect2 arch="mipsel"><title>Boot Parameters</title>
@@ -76,19 +48,6 @@ You cannot pass any boot parameters directly.  Instead, you have to edit
 the <filename>/nfsroot/default.colo</filename> file on the NFS server and
 add your parameters to the <replaceable>args</replaceable> variable.
 
-</para>
-  </sect3>
-
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-You cannot pass any boot parameters directly from the CFE prompt.  Instead,
-you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP
-server and add your parameters to the <replaceable>extra_args</replaceable>
-variable.
-
 </para>
   </sect3>
 
-- 
cgit v1.2.3