From 493014b292f6f65949f3abefc1c155ec69e4c16d Mon Sep 17 00:00:00 2001
From: Luca Monducci <luca.mo@tiscali.it>
Date: Sun, 27 Nov 2016 20:58:27 +0000
Subject: Update italian d-i manual

---
 it/boot-installer/arm.xml | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'it/boot-installer/arm.xml')

diff --git a/it/boot-installer/arm.xml b/it/boot-installer/arm.xml
index 5707826fe..63de06e9f 100644
--- a/it/boot-installer/arm.xml
+++ b/it/boot-installer/arm.xml
@@ -1,5 +1,5 @@
 <!-- retain these comments for translator revision tracking -->
-<!-- original version: 69885 -->
+<!-- original version: 70293 -->
 
   <sect2 arch="armhf;armel" id="boot-image-formats">
   <!-- <title>Boot image formats</title> -->
@@ -190,20 +190,20 @@ macchina.
 Run a serial console at 115200, 8bit no parity, and boot the
 Juno. It should boot from the USB stick to a GRUB menu.
 The console config is not correctly detected on Juno so just hitting
-return will show no kernel output. Set the console to  
+&enterkey; will show no kernel output. Set the console to  
 -->
 
 Attivare la console seriale a 115200, 8 bit, senza parità e poi avviare
 Juno. Dovrebbe avviarsi dalla chiavetta USB e mostrare il menu di GRUB.
 La configurazione della console non è rilevata correttamente quindi
-premere Invio per vedere l'output del kernel. Per impostare la console
+premere &enterkey; per vedere l'output del kernel. Per impostare la console
 
 <informalexample><screen>
 console=ttyAMA0,115200n8
 </screen></informalexample>
 
 <!--
-as described in (<xref linkend="arm64-console-setup"/>). <keycombo><keycap>Control</keycap>
+(as described in <xref linkend="arm64-console-setup"/>). <keycombo><keycap>Control</keycap>
 <keycap>x</keycap></keycombo> to boot should show you the &d-i; screens,
 and allow you to proceed with a standard installation.
 -->
@@ -376,7 +376,7 @@ documentation for appropriate values and set them manually.  For
 systems based on Allwinner SunXi SOCs (e.g.  the Allwinner A10,
 architecture name <quote>sun4i</quote> or the Allwinner A20,
 architecture name <quote>sun7i</quote>), you can e.g.  use the
-follwing values:
+following values:
 -->
 
 Se non sono state definite, è necessario trovare nella documentazione
-- 
cgit v1.2.3