From 1ea73eea5ecc6a8ed901316049259aee737ee554 Mon Sep 17 00:00:00 2001
From: Joey Hess <joeyh@debian.org>
Date: Fri, 7 Oct 2005 19:51:38 +0000
Subject: move manual to top-level directory, split out of debian-installer
 package

---
 fi/hardware/network-cards.xml | 214 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 214 insertions(+)
 create mode 100644 fi/hardware/network-cards.xml

(limited to 'fi/hardware/network-cards.xml')

diff --git a/fi/hardware/network-cards.xml b/fi/hardware/network-cards.xml
new file mode 100644
index 000000000..d296a821e
--- /dev/null
+++ b/fi/hardware/network-cards.xml
@@ -0,0 +1,214 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28672 untranslated -->
+
+ <sect1 id="network-cards">
+ <title>Network Connectivity Hardware</title>
+
+<para arch="i386">
+
+<!-- last updated for kernel-image_2.0.36-2 -->
+
+Most PCI and many older ISA network cards are supported.
+Some network interface cards are not supported by most Debian
+installation disks, such as AX.25 cards and protocols;
+NI16510 EtherBlaster cards; Schneider &amp; Koch G16 cards;
+and the Zenith Z-Note built-in network card. Microchannel (MCA) network
+cards are not supported by the standard installation system, but see
+<ulink url="&url-linux-mca;">Linux on MCA</ulink> for some (old)
+instructions.
+FDDI networks are also not supported by the installation disks, both
+cards and protocols.
+
+<!-- missing-doc FIXME You can create a custom kernel which supports an
+otherwise unsupported card and then substitute in the installer (see
+<xref linkend="rescue-replace-kernel"/>). -->
+
+</para><para arch="i386">
+
+As for ISDN, the D-channel protocol for the (old) German 1TR6 is not
+supported; Spellcaster BRI ISDN boards are also not supported by the
+&d-i;.
+
+</para>
+
+<para arch="m68k">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.  Again, see
+<ulink url="&url-m68k-faq;"></ulink> for complete details.
+
+</para>
+
+<para arch="sparc">
+
+The following network interface cards (NICs) are supported from the bootable
+kernel directly:
+
+<itemizedlist>
+ <listitem><para>
+
+Sun LANCE
+
+
+</para></listitem>
+ <listitem><para>
+
+Sun Happy Meal
+
+
+</para></listitem>
+</itemizedlist>
+
+</para><para arch="sparc">
+
+The following network interface cards are supported as modules.  They
+can be enabled once the drivers are installed during the setup.
+However, due to the magic of OpenPROM, you still should be able to
+boot from these devices:
+
+<itemizedlist>
+ <listitem><para>
+
+Sun BigMAC
+
+
+</para></listitem>
+ <listitem><para>
+
+Sun QuadEthernet
+
+</para></listitem>
+ <listitem><para>
+
+MyriCOM Gigabit Ethernet
+
+</para></listitem>
+</itemizedlist>
+
+</para><para arch="alpha">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.
+
+</para><para arch="powerpc">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.
+
+</para><para arch="hppa">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.
+
+</para><para arch="ia64">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.
+
+</para><para arch="mips">
+
+Any network interface card (NIC) supported by the Linux kernel should
+also be supported by the boot disks.  You may need to load your
+network driver as a module.
+
+</para><para arch="mipsel">
+
+Due to kernel limitations only the onboard network interfaces on
+DECstations are supported, TurboChannel option network cards currently
+do not work.
+
+</para><para arch="s390">
+
+Any network interface card (NIC) supported by the Linux kernel are
+also be supported by the boot disks.  All network drivers are compiled
+as modules so you need to load one first during the initial network
+setup. The list of supported network devices is:
+
+<itemizedlist>
+ <listitem><para>
+
+Channel to Channel (CTC) and ESCON connection (real or emulated)
+
+</para></listitem>
+ <listitem><para>
+
+OSA-2 Token Ring/Ethernet and OSA-Express Fast Ethernet (non-QDIO)
+
+</para></listitem>
+<listitem><para>
+
+Inter-User Communication Vehicle (IUCV) &mdash; available for VM guests only
+
+</para></listitem>
+<listitem><para>
+
+OSA-Express in QDIO mode, HiperSockets and Guest-LANs
+
+</para></listitem>
+</itemizedlist>
+
+</para>
+
+<para arch="arm">
+
+The following network interface cards are supported directly by the
+boot disks on NetWinder and CATS machines:
+
+<itemizedlist>
+ <listitem><para>
+
+    PCI-based NE2000
+
+
+</para></listitem>
+ <listitem><para>
+
+    DECchip Tulip
+
+</para></listitem>
+</itemizedlist>
+
+</para><para arch="arm">
+
+The following network interface cards are supported directly by the
+boot disks on RiscPCs:
+
+<itemizedlist>
+ <listitem><para>
+
+    Ether1
+
+</para></listitem>
+ <listitem><para>
+
+    Ether3
+
+</para></listitem>
+ <listitem><para>
+
+    EtherH
+
+</para></listitem>
+</itemizedlist>
+
+</para><para arch="arm">
+
+If your card is mentioned in the lists above, the complete installation
+can be carried out from the network with no need for CD-ROMs or floppy
+disks.
+
+</para><para arch="arm">
+
+Any other network interface card (NIC) supported by the Linux kernel
+should also be supported by the boot disks.  You may need to load your
+network driver as a module; this means that you will have to install
+the operating system kernel and modules using some other media.
+
+</para>
+
+ </sect1>
-- 
cgit v1.2.3