From addd1628ee1d9c3c65916aa184fee26ee46ab0c8 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 28 Nov 2005 23:58:11 +0000 Subject: Delete obsolete files --- fi/appendix/example-preseed-etch.xml | 374 ----------------------------------- 1 file changed, 374 deletions(-) delete mode 100644 fi/appendix/example-preseed-etch.xml (limited to 'fi/appendix') diff --git a/fi/appendix/example-preseed-etch.xml b/fi/appendix/example-preseed-etch.xml deleted file mode 100644 index 6f653ab2f..000000000 --- a/fi/appendix/example-preseed-etch.xml +++ /dev/null @@ -1,374 +0,0 @@ - - - - -#### Startup. - -# To use a preseed file, you'll first need to boot the installer, -# and tell it what preseed file to use. This is done by passing the -# kernel a boot parameter, either manually at boot or by editing the -# syslinux.cfg (or similar) file and adding the parameter to the end -# of the append line(s) for the kernel. -# -# If you're netbooting, use this: -# preseed/url=http://host/path/to/preseed -# If you're remastering a CD, you could use this: -# preseed/file=/cdrom/preseed -# If you're installing from USB media, use this, and put the preseed file -# in the toplevel directory of the USB stick. -# preseed/file=/hd-media/preseed -# -# If you feel comfortable modifying the installer's initrd image, -# you can also place a preseed file in the root directory of the initrd's -# filesystem, named "preseed.cfg" -- the installer will always use this -# file if it is present. Otherwise, be sure to copy this file to the location -# you specify. -# -# To make sure the installer gets the right preseed file, you can specify -# a checksum for the file. Currently this needs to be a md5sum, and if -# specified it must match the file or the installer will refuse to use the -# file. -# preseed/url/checksum=5da499872becccfeda2c4872f9171c3d -# preseed/file/checksum=5da499872becccfeda2c4872f9171c3d -# -# Some parts of the installation process cannot be automated using -# some forms of preseeding, because the questions are asked before -# the preseed file is loaded. For example, if the preseed file is -# downloaded over the network, the network setup must be done first. -# One reason to use initrd preseeding is that it allows preseeding -# of even these early steps of the installation process. -# -# If a preseed file cannot be used to preseed some steps, the install can -# still be fully automated, since you can pass preseed values to the kernel -# on the command line. Just pass path/to/var=value for any of the preseed -# variables listed below. -# -# While you're at it, you may want to throw a debconf/priority=critical in -# there, to avoid most questions even if the preseeding below misses some. -# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit -# enter to boot the installer. -# -# Note that the 2.4 kernel accepts a maximum of 8 command line options and -# 8 environment options (including any options added by default for the -# installer). If these numbers are exceeded, 2.4 kernels will drop any -# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer, -# you can use 32 command line options and 32 environment options. -# -# Some of the default options, like 'vga=normal' may be safely removed -# for most installations, which may allow you to add more options for -# preseeding. - -# To select your language and country, use this setting, but remember -# that this will only work for initrd based preseeding, for other forms of -# preseeding you must convert it into a kernel parameter, -# such as debian-installer/locale=en_US -d-i debian-installer/locale string en_US - -# To select your keyboard, use this setting. Again it will need to be -# passed as a kernel parameter for most preseed setups. -d-i console-keymaps-at/keymap select us - -#### Network configuration. - -# Of course, this won't work if you're loading your preseed file from the -# network! But it's great if you're booting from CD or USB stick. You can -# also pass network config parameters in on the kernel params if you are -# loading preseed files from the network. - -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# If you have a slow dhcp server and the installer times out waiting for -# it, this might be useful. -#d-i netcfg/dhcp_timeout string 60 - -# If you prefer to configure the network manually, here's how: -#d-i netcfg/disable_dhcp boolean true -#d-i netcfg/get_nameservers string 192.168.1.1 -#d-i netcfg/get_ipaddress string 192.168.1.42 -#d-i netcfg/get_netmask string 255.255.255.0 -#d-i netcfg/get_gateway string 192.168.1.1 -#d-i netcfg/confirm_static boolean true - -# Note that any hostname and domain names assigned from dhcp take -# precedence over values set here. However, setting the values still -# prevents the questions from being shown even if values come from dhcp. -d-i netcfg/get_hostname string unassigned-hostname -d-i netcfg/get_domain string unassigned-domain - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -#### Mirror settings. - -d-i mirror/country string enter information manually -d-i mirror/http/hostname string http.us.debian.org -d-i mirror/http/directory string /debian -d-i mirror/http/proxy string - -# What suite of Debian to install. -#d-i mirror/suite string testing -# What suite of Debian to use for loading installer components. -# (Defaults to same as mirror/suite.) -#d-i mirror/udeb/suite string testing - -#### Partitioning. - -# If the system has free space you can choose to only partition that space. -#d-i partman-auto/init_automatically_partition \ -# select Use the largest continuous free space - -# Alternatively, you can specify a disk to partition. The device name can -# be given in either devfs or traditional non-devfs format. -# For example, to use the first disk devfs knows of: -d-i partman-auto/disk string /dev/discs/disc0/disc - -# You can choose from any of the predefined partitioning recipes: -d-i partman-auto/choose_recipe \ - select All files in one partition (recommended for new users) -#d-i partman-auto/choose_recipe \ -# select Separate /home partition -#d-i partman-auto/choose_recipe \ -# select Separate /home, /usr, /var, and /tmp partitions - -# Or provide a recipe of your own... -# The recipe format is documented in the file devel/partman-auto-recipe.txt. -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe - -# If not, you can put an entire recipe the preseed file in one (logical) -# line. This example creates a small /boot partition, suitable swap, and -# uses the rest of the space for the root partition: -#d-i partman-auto/expert_recipe string \ -# boot-root :: \ -# 40 50 100 ext3 \ -# $primary{ } $bootable{ } \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ /boot } \ -# . \ -# 500 10000 1000000000 ext3 \ -# method{ format } format{ } \ -# use_filesystem{ } filesystem{ ext3 } \ -# mountpoint{ / } \ -# . \ -# 64 512 300% linux-swap \ -# method{ swap } format{ } \ -# . - -# This makes partman automatically partition without confirmation. -d-i partman/confirm_write_new_label boolean true -d-i partman/choose_partition \ - select Finish partitioning and write changes to disk -d-i partman/confirm boolean true - -#### Boot loader installation. - -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the MBR if if finds some other OS -# too, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean true - -# Alternatively, if you want to install to a location other than the mbr, -# uncomment and edit these lines: -#d-i grub-installer/bootdev string (hd0,0) -#d-i grub-installer/only_debian boolean false -#d-i grub-installer/with_other_os boolean false - -#### Finishing up the first stage install. - -# Avoid that last message about the install being complete. -d-i prebaseconfig/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -#### Shell commands. - -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preseed file like this one. Only use preseed files from trusted -# locations! To drive that home, and because it's generally useful, here's -# a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string anna-install some-udeb - -# This command is run just before the install finishes, but when there is -# still a usable /target directory. -#d-i preseed/late_command string echo foo > /target/etc/bar - -# This command is run just as base-config is starting up. -#base-config base-config/early_command string echo hi mom - -# This command is run after base-config is done, just before the login: -# prompt. This is a good way to install a set of packages you want, or to -# tweak the configuration of the system. -#base-config base-config/late_command \ -# string apt-get install zsh; chsh -s /bin/zsh - -###### Preseeding the 2nd stage of the installation. - -#### Preseeding base-config. - -# Avoid the introductory message. -base-config base-config/intro note - -# Avoid the final message. -base-config base-config/login note - -# If you installed a display manager, but don't want to start it immediately -# after base-config finishes. -#base-config base-config/start-display-manager boolean false - -# Some versions of the installer can report back on what you've installed. -# The default is not to report back, but sending reports helps the project -# determine what software is most popular and include it on CDs. -#popularity-contest popularity-contest/participate boolean false - -#### Clock and time zone setup. - -# Controls whether or not the hardware clock is set to UTC. -d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for options. -d-i time/zone string US/Eastern - -#### Account setup. - -# To preseed the root password, you have to put it in the clear in this -# file. That is not a very good idea, use caution! -#passwd passwd/root-password password r00tme -#passwd passwd/root-password-again password r00tme - -# If you want to skip creation of a normal user account. -#passwd passwd/make-user boolean false - -# Alternatively, you can preseed the user's name and login. -#passwd passwd/user-fullname string Debian User -#passwd passwd/username string debian -# And their password, but use caution! -#passwd passwd/user-password password insecure -#passwd passwd/user-password-again password insecure - -#### Apt setup. - -# This question controls what source the second stage installation uses -# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list -# by hand -base-config apt-setup/uri_type select http - -# If you choose ftp or http, you'll be asked for a country and a mirror. -base-config apt-setup/country select enter information manually -base-config apt-setup/hostname string http.us.debian.org -base-config apt-setup/directory string /debian -# Stop after choosing one mirror. -base-config apt-setup/another boolean false - -# You can choose to install non-free and contrib software. -#base-config apt-setup/non-free boolean true -#base-config apt-setup/contrib boolean true - -# Do enable security updates. -base-config apt-setup/security-updates boolean true - -#### Package selection. - -# You can choose to install any combination of tasks that are available. -# Available tasks as of this writing include: Desktop environment, -# Web server, Print server, DNS server, File server, Mail server, -# SQL database, Laptop, Standard system, manual package selection. The -# last of those will run aptitude. You can also choose to install no -# tasks, and force the installation of a set of packages in some other -# way. We recommend always including the Standard system task. -tasksel tasksel/first multiselect Desktop environment, Standard system -#tasksel tasksel/first multiselect Web server, Standard system - -#### Mailer configuration. - -# During a normal install, exim asks only a few questions. Here's how to -# avoid even those. More complicated preseeding is possible. -exim4-config exim4/dc_eximconfig_configtype \ - select no configuration at this time -exim4-config exim4/no_config boolean true -exim4-config exim4/no_config boolean true - -# It's a good idea to set this to whatever user account you choose to -# create. Leaving the value blank results in postmaster mail going to -# /var/mail/mail. -exim4-config exim4/dc_postmaster string - -#### X Configuration. - -# Preseeding Debian's X config is possible, but you probably need to know -# some details about the video hardware of the machine, since Debian's X -# configurator does not do fully automatic configuration of everything. - -# X can detect the right driver for some cards, but if you're preseeding, -# you override whatever it chooses. Still, vesa will work most places. -#xserver-xfree86 xserver-xfree86/config/device/driver select vesa - -# A caveat with mouse autodetection is that if it fails, X will retry it -# over and over. So if it's preseeded to be done, there is a possibility of -# an infinite loop if the mouse is not autodetected. -#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true - -# Monitor autodetection is recommended. -xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true -# Uncomment if you have an LCD display. -#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true -# X has three configuration paths for the monitor. Here's how to preseed -# the "medium" path, which is always available. The "simple" path may not -# be available, and the "advanced" path asks too many questions. -xserver-xfree86 xserver-xfree86/config/monitor/selection-method \ - select medium -xserver-xfree86 xserver-xfree86/config/monitor/mode-list \ - select 1024x768 @ 60 Hz - -#### Everything else. - -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - -# If you like, you can include other preseed files into this one. -# Any settings in those files will override pre-existing settings from this -# file. More that one file can be listed, separated by spaces; all will be -# loaded. The included files can have preseed/include directives of their -# own as well. Note that if the filenames are relative, they are taken from -# the same directory as the preseed file that includes them. -#d-i preseed/include string x.cfg - -# The installer can optionally verify checksums of preseed files before -# using them. Currently only md5sums are supported, list the md5sums -# in the same order as the list of files to include. -#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d - -# More flexibly, this runs a shell command and if it outputs the names of -# preseed files, includes those files. -#d-i preseed/include_command \ -# string echo if [ "`hostname`" = bob ]; then echo bob.cfg; fi - -# To check the format of your preseed file before performing an install, -# you can use debconf-set-selections: -# debconf-set-selections -c preseed.cfg - -- cgit v1.2.3