From aae019d71a095b4bf234a1204e9508ee82167899 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Tue, 1 Sep 2009 17:22:27 +0000 Subject: Remove untranslated and obsolete files for the Basque translation --- eu/hardware/supported/alpha.xml | 432 -------------------------------------- eu/hardware/supported/arm.xml | 96 --------- eu/hardware/supported/hppa.xml | 17 -- eu/hardware/supported/m68k.xml | 39 ---- eu/hardware/supported/mips.xml | 36 ---- eu/hardware/supported/mipsel.xml | 115 ---------- eu/hardware/supported/powerpc.xml | 248 ---------------------- eu/hardware/supported/s390.xml | 21 -- eu/hardware/supported/sparc.xml | 82 -------- 9 files changed, 1086 deletions(-) delete mode 100644 eu/hardware/supported/alpha.xml delete mode 100644 eu/hardware/supported/arm.xml delete mode 100644 eu/hardware/supported/hppa.xml delete mode 100644 eu/hardware/supported/m68k.xml delete mode 100644 eu/hardware/supported/mips.xml delete mode 100644 eu/hardware/supported/mipsel.xml delete mode 100644 eu/hardware/supported/powerpc.xml delete mode 100644 eu/hardware/supported/s390.xml delete mode 100644 eu/hardware/supported/sparc.xml (limited to 'eu/hardware') diff --git a/eu/hardware/supported/alpha.xml b/eu/hardware/supported/alpha.xml deleted file mode 100644 index 816c89c8b..000000000 --- a/eu/hardware/supported/alpha.xml +++ /dev/null @@ -1,432 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -Complete information regarding supported DEC Alphas can be found at -Linux Alpha HOWTO. The -purpose of this section is to describe the systems supported -by the boot disks. - - - -Alpha machines are subdivided into different system types because there -are a number of generations of motherboard and supporting chip-sets. -Different systems (``sub-architectures'') often have radically different -engineering and capabilities. Therefore, the process of installing and, -more to the point, booting, can vary from system to system. - - - -The following table lists the system types supported by the Debian -installation system. The table also indicates the code -name for these system types. You'll need to know this code -name when you actually begin the installation process: - - - - - - - - - - - - Hardware Type - AliasesMILO image - - - - - - ALCOR - AlphaStation 500 5/266.300 - Maverick - alcor - - AlphaStation 500 5/333...500 - Bret - alcor - - AlphaStation 600/266...300 - Alcor - alcor - - AlphaStation 600/300...433 - XLT - xlt - - - - BOOK1 - AlphaBook1 (laptop) - Alphabook1/Burns - book1 - - - - AVANTI - AlphaStation 200 4/100...166 - Mustang - avanti - - AlphaStation 200 4/233 - Mustang+ - avanti - - AlphaStation 205 4/133...333 - LX3 - avanti - - AlphaStation 250 4/300 - M3+ - avanti - - AlphaStation 255 4/133...333 - LX3+ - avanti - - AlphaStation 300 4/266 - Melmac - avanti - - AlphaStation 400 4/166 - Chinet - avanti - - AlphaStation 400 4/233...300 - Avanti - avanti - - - - EB164 - AlphaPC164 - PC164 - pc164 - - AlphaPC164-LX - LX164 - lx164 - - AlphaPC164-SX - SX164 - sx164 - - EB164 - EB164 - eb164 - - - - EB64+ - AlphaPC64 - Cabriolet - cabriolet - - AlphaPCI64 - Cabriolet - cabriolet - - EB64+ - EB64+ - eb64p - - - - EB66 - EB66 - EB66 - eb66 - - EB66+ - EB66+ - eb66p - - - - JENSEN - DEC 2000 Model 300(S) - Jensen - N/A - - DEC 2000 Model 500 - Culzen - N/A - - DECpc 150 - Jensen - N/A - - - - MIATA - Personal WorkStation 433a - Miata - miata - - Personal WorkStation 433au - Miata - miata - - Personal WorkStation 466au - Miata - miata - - Personal WorkStation 500a - Miata - miata - - Personal WorkStation 500au - Miata - miata - - Personal WorkStation 550au - Miata - miata - - Personal WorkStation 600a - Miata - miata - - Personal WorkStation 600au - Miata - miata - - - - MIKASA - AlphaServer 1000 4/200 - Mikasa - mikasa - - AlphaServer 1000 4/233..266 - Mikasa+ - mikasa - - AlphaServer 1000 5/300 - Mikasa-Pinnacle - mikasa - - AlphaServer 1000 5/300 - Mikasa-Primo - mikasa - - - - NAUTILUS - UP1000 - Nautilus - N/A - - UP1100 - Galaxy-Train/Nautilus Jr. - N/A - - - - NONAME - AXPpci33 - Noname - noname - - UDB - Multia - noname - - - - NORITAKE - AlphaServer 1000A 4/233...266 - Noritake - N/A - - AlphaServer 1000A 5/300 - Noritake-Pinnacle - N/A - - AlphaServer 1000A 5/333...500 - Noritake-Primo - N/A - - AlphaServer 800 5/333...500 - Corelle - N/A - - AlphaStation 600 A - Alcor-Primo - N/A - - Digital Server 3300 - Corelle - N/A - - Digital Server 3300R - Corelle - N/A - - - - PLATFORM 2000 - P2K - P2K - p2k - - - - RAWHIDE - AlphaServer 1200 5/xxx - Tincup/DaVinci - N/A - - AlphaServer 4000 5/xxx - Wrangler/Durango - N/A - - AlphaServer 4100 5/xxx - Dodge - N/A - - Digital Server 5300 - Tincup/DaVinci - N/A - - Digital Server 7300 - Dodge - N/A - - - - RUFFIAN - DeskStation AlphaPC164-UX - Ruffian - ruffian - - DeskStation RPL164-2 - Ruffian - ruffian - - DeskStation RPL164-4 - Ruffian - ruffian - - DeskStation RPX164-2 - Ruffian - ruffian - - DeskStation RPX164-4 - Ruffian - ruffian - - Samsung AlphaPC164-BX - Ruffian - ruffian - - - - SABLE - AlphaServer 2000 4/xxx - Demi-Sable - N/A - - AlphaServer 2000 5/xxx - Demi-Gamma-Sable - N/A - - AlphaServer 2100 4/xxx - Sable - N/A - - AlphaServer 2100 5/xxx - Gamma-Sable - N/A - - - - TAKARA - 21164 PICMG SBC - Takara - takara - - - - TITAN - AlphaServer ES45 - Privateer - N/A - - UNKNOWN - Yukon - N/A - - - - TSUNAMI - AlphaServer DS10 - Webbrick - N/A - - AlphaServer DS20 - Catamaran/Goldrush - N/A - - AlphaServer DS20E - Goldrack - N/A - - AlphaServer ES40 - Clipper - N/A - - DP264 - DP264 - N/A - - SMARTengine 21264 PCI/ISA SBC - Eiger - N/A - - UNKNOWN - Warhol - N/A - - UNKNOWN - Windjammer - N/A - - UP2000 - Swordfish - N/A - - XP1000 - Monet/Brisbane - N/A - - XP900 - Webbrick - N/A - - - - WILDFIRE - AlphaServer GS160 - Wildfire - N/A - - AlphaServer GS320 - Wildfire - N/A - - - - XL - XL-233...266 - XL - xl - - - - diff --git a/eu/hardware/supported/arm.xml b/eu/hardware/supported/arm.xml deleted file mode 100644 index 2c330b5bc..000000000 --- a/eu/hardware/supported/arm.xml +++ /dev/null @@ -1,96 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - - -Each distinct ARM architecture requires its own kernel, because of -this the standard Debian distribution only supports installation on -a number of the most common systems. The Debian userland however may be used by any ARM CPU including xscale. - - - - - -Most ARM CPUs may be run in either endian mode, however almost every -current system implementation uses little-endian mode. Debian -currently only supports little-endian ARM systems. - - - - - -The common supported systems are - - - -Netwinder - - -This is actually the name for the group of machines -based upon the StrongARM 110 CPU and Intel 21285 Nothbridge it -comprises machines are: Netwinder (possibly one of the most common ARM -boxes), CATS (also known as the EB110ATX), EBSA 285 and Compaq -personal server (cps, aka skiff). - - - - - -Bast - - -This is a modern ARM 920 board with a 266MHz Samsung -processor. It has integrated IDE, USB, Serial, Parallel, audio, video, -flash and two ethernet ports. This system has a good bootloader which -is also found on the CATS and Riscstation systems. - - - - - -RiscPC - - -This machine is the oldest supported hardware it was released -in 1994. It has RISC OS in ROM, Linux can be booted from that OS using -linloader. The RiscPC has a modular CPU card and typicaly has a 30MHz -610, 40MHz 710 or 233MHz Strongarm 110 CPU fitted. The mainboard has -integrated IDE, SVGA video, parallel port, single serial port, ps 2 -keyboard and proprietay mouse port. The proprietary module expansion -bus allows for up to eight expansion cards to be fitted depending on -configuration, several of these modules have Linux drivers. - - - - - -Riscstation - - -This is an inexpensive 56MHz 7500FE based machine with -integrated video, IDE, PS2 keyboard and mouse and two serial -ports. Its lack of processing power was made up for by its price. It -may be found in two configurations one with RISC OS and one with a -simple bootloader. - - - - - -LART - - -This is a modular open hardware platform intended to be built -be enthusiasts. To be useful to install Debian it requires its KSB -expansion board. - - - - - - - - diff --git a/eu/hardware/supported/hppa.xml b/eu/hardware/supported/hppa.xml deleted file mode 100644 index 6f3c8c8ee..000000000 --- a/eu/hardware/supported/hppa.xml +++ /dev/null @@ -1,17 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -The are two major support &architecture; flavors: -PA-RISC 1.1 and PA-RISC 2.0. The PA-RISC 1.1 architecture is targeted -at 32-bit processors whereas the 2.0 architecture is targeted to -the 64-bit processors. Some systems are able to run either kernel. -In both cases, the userland is 32-bit. There is the possibility of -a 64-bit userland in the future. - - - - diff --git a/eu/hardware/supported/m68k.xml b/eu/hardware/supported/m68k.xml deleted file mode 100644 index 6e165f6e7..000000000 --- a/eu/hardware/supported/m68k.xml +++ /dev/null @@ -1,39 +0,0 @@ - - - - CPU, Main Boards, and Video Support - - -Complete information concerning supported M68000 based -(&architecture;) systems can be found at the -Linux/m68k FAQ. This section merely -outlines the basics. - - - -The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged -Memory Management Unit) and a FPU (floating-point unit). This -includes the 68020 with an external 68851 PMMU, the 68030, and better, -and excludes the ``EC'' line of 680x0 processors. See the -Linux/m68k FAQ for complete details. - - - -There are four major flavors of supported -&architecture; flavors: Amiga, Atari, Macintosh -and VME machines. Amiga and Atari were the first two systems to which -Linux was ported; in keeping, they are also the two most -well-supported Debian ports. The Macintosh line is supported -incompletely, both by Debian and by the Linux kernel; see -Linux m68k for Macintosh for project -status and supported hardware. The BVM and Motorola single board -VMEbus computers are the most recent addition to the list of machines -supported by Debian. Ports to other &architecture; architectures, -such as the Sun3 architecture and NeXT black box, are underway but not -yet supported by Debian. - - - - - - diff --git a/eu/hardware/supported/mips.xml b/eu/hardware/supported/mips.xml deleted file mode 100644 index 89556744b..000000000 --- a/eu/hardware/supported/mips.xml +++ /dev/null @@ -1,36 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -Complete information regarding supported mips/mipsel machines can be -found at Linux MIPS HOWTO. The -purpose of this section is to describe the systems supported by the -boot disks. - - - - CPU - - -Currently the SGI Indy, Indigo 2 and Challenge S with R4000, R4400 and -R5000 processors are supported by the Debian installation system on -big endian MIPS. If you want other subarchitectures supported contact -the -debian-&architecture; mailing list. - - - -Note: whenever this document refers to the SGI Indy the Indigo 2 and -Challenge S are meant as well. - - - -Note: for little endian MIPS please see the mipsel architecture. - - - - - diff --git a/eu/hardware/supported/mipsel.xml b/eu/hardware/supported/mipsel.xml deleted file mode 100644 index 9cf806f6d..000000000 --- a/eu/hardware/supported/mipsel.xml +++ /dev/null @@ -1,115 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -Complete information regarding supported mips/mipsel machines can be -found at Linux MIPS HOWTO. The -purpose of this section is to describe the systems supported by the -boot disks. - - - - CPU/Machine types - - - -Currently only DECstations with R3000 and R4000/R4400 CPUs are -supported by the Debian installation system on little endian MIPS. -The Debian installation system works on the following machines: - - - - - - - - System TypeCPUCode-name - Debian subarchitecture - - - - - - DECstation 5000/1xx - R3000 - 3MIN - r3k-kn02 - - DECstation 5000/150 - R4000 - 3MIN - r4k-kn04 - - DECstation 5000/240 - R3000 - 3MAX+ - r3k-kn02 - - DECstation 5000/260 - R4400 - 3MAX+ - r4k-kn04 - - Personal DECstation 5000/xx - R3000 - Maxine - r3k-kn02 - - Personal DECstation 5000/50 - R4000 - Maxine - r4k-kn04 - - - - - -Linux/MIPS also works on the DECstation 5000/200, but this is not -supported by the Debian installation system currently. - - - - - Supported console options - - -Serial console is available on all supported DECstations (9600 bps, -8N1). For using serial console, you have to boot the installer image -with the "console=ttySx" kernel parameter (with "x" being the number -of the serial port you have your terminal connected to - usually "2", -but "0" for the Personal DECstations). On 3MIN and 3MAX+ (DECstation -5000/1xx, 5000/240 and 5000/260) local console is available with the -PMAG-BA and the PMAGB-B graphics options. - - - -If you would like to have support for other subarchitectures, please -contact the -debian-mips mailing list. - - - -If you have a Linux system to use as serial terminal, an easy way -is to run cu (part of the uucp package) on it. -Example: - - - -cu -l /dev/ttyS1 -s 9600 - - - - - -where the option "-l" (line) sets the serial port to use and "-s" (speed) -sets the speed for the connection (9600 bits per second). - - - - - - - diff --git a/eu/hardware/supported/powerpc.xml b/eu/hardware/supported/powerpc.xml deleted file mode 100644 index 7373a693d..000000000 --- a/eu/hardware/supported/powerpc.xml +++ /dev/null @@ -1,248 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -There are four major supported &architecture; -flavors: PMac (Power-Macintosh) PReP, Apus, and CHRP machines. Ports -to other &architecture; architectures, such as -the Be-Box and MBX architecture, are underway but not yet supported by -Debian. We may have a 64bit port (Power3) in the future. - - - -Apple (and briefly a few other manufacturers - Power Computing, for -example) makes a series of Macintosh computers based on the PowerPC -processor. For purposes of architecture support, they are categorized -as NuBus, OldWorld PCI, and NewWorld. - - - -Macintosh computers using the 680x0 series of processors are not in -the PowerPC family but are instead m68k machines. Those models start -with `Mac II' or have a 3-digit model number such as Centris 650 -or Quadra 950. Apple's pre-iMac PowerPC model numbers have four digits. - - - -NuBus systems are not currently supported by debian/powerpc. The -monolithic Linux/PPC kernel architecture does not have support for -these machines; instead, one must use the MkLinux Mach microkernel, -which Debian does not yet support. These include the following: - - - - -Power Macintosh 6100, 7100, 8100 - - - - -Performa 5200, 6200, 6300 - - - - -Powerbook 1400, 2300, and 5300 - - - - -Workgroup Server 6150, 8150, 9150 - - - - -A linux kernel for these machines and limited support is available at - - - - -OldWorld systems are most Power Macintoshes with a floppy drive and a -PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are -OldWorld machines. The beige colored G3 systems are also OldWorld. - - - -The so called NewWorld PowerMacs are any PowerMacs in translucent -colored plastic cases. That includes all iMacs, iBooks, G4 systems, -blue colored G3 systems, and most PowerBooks manufactured in and after -1999. The NewWorld PowerMacs are also known for using the `ROM in RAM' -system for MacOS, and were manufactured from mid-1998 onwards. - - - -Recently introduced Macintosh systems have hardware which is more well -supported by the 2.4 Linux kernel. For some, the 2.2 kernel just -doesn't work. The new-powermac flavor, which uses the 2.4 kernel, has -been added to keep up with the hardware. The new-powermac flavor may -also be installed on other OldWorld and NewWorld machines. Machines -for which new-powermac is highly recommended are flagged with an -asterisk below. - - - -Specifications for Apple hardware are available at -AppleSpec, -and, for older hardware, -AppleSpec Legacy. - - - - - - - - - - - Model Name/Number - Architecture - - - - - - Apple - iMac Bondi Blue, 5 Flavors, Slot Loading - powermac-NewWorld - - iMac Summer 2000, Early 2001 - powermac-NewWorld - - * iBook, iBook SE, iBook Dual USB - powermac-NewWorld - - * iBook2 - powermac-NewWorld - - Power Macintosh Blue and White (B&W) G3 - powermac-NewWorld - - * Power Macintosh G4 PCI, AGP, Cube - powermac-NewWorld - - * Power Macintosh G4 Gigabit Ethernet - powermac-NewWorld - - * Power Macintosh G4 Digital Audio, Quicksilver - powermac-NewWorld - - PowerBook G3 FireWire Pismo (2000) - powermac-NewWorld - - PowerBook G3 Lombard (1999) - powermac-NewWorld - - * PowerBook G4 Titanium - powermac-NewWorld - - Performa 4400, 54xx, 5500 - powermac-OldWorld - - Performa 6360, 6400, 6500 - powermac-OldWorld - - Power Macintosh 4400, 5400 - powermac-OldWorld - - Power Macintosh 7200, 7300, 7500, 7600 - powermac-OldWorld - - Power Macintosh 8200, 8500, 8600 - powermac-OldWorld - - Power Macintosh 9500, 9600 - powermac-OldWorld - - Power Macintosh (Beige) G3 Minitower - powermac-OldWorld - - Power Macintosh (Beige) Desktop, All-in-One - powermac-OldWorld - - PowerBook 2400, 3400, 3500 - powermac-OldWorld - - PowerBook G3 Wallstreet (1998) - powermac-OldWorld - - Twentieth Anniversary Macintosh - powermac-OldWorld - - Workgroup Server 7250, 7350, 8550, 9650, G3 - powermac-OldWorld - - - - Power Computing - PowerBase, PowerTower / Pro, PowerWave - powermac-OldWorld - - PowerCenter / Pro, PowerCurve - powermac-OldWorld - - - - UMAX - C500, C600, J700, S900 - powermac-OldWorld - - - - APS - APS Tech M*Power 604e/2000 - powermac-OldWorld - - - - Motorola - Starmax 3000, 4000, 5000, 5500 - powermac-OldWorld - - Firepower, PowerStack Series E, PowerStack II - prep - - MPC 7xx, 8xx - prep - - MTX, MTX+ - prep - - MVME2300(SC)/24xx/26xx/27xx/36xx/46xx - prep - - MCP(N)750 - prep - - - - IBM RS/6000 - 40P, 43P - prep - - Power 830/850/860 (6070, 6050) - prep - - 6030, 7025, 7043 - prep - - p640 - prep - - B50, 43P-150, 44P - chrp - - - - Amiga Power-UP Systems (APUS) - A1200, A3000, A4000 - apus - - - - - - diff --git a/eu/hardware/supported/s390.xml b/eu/hardware/supported/s390.xml deleted file mode 100644 index 3de7074d1..000000000 --- a/eu/hardware/supported/s390.xml +++ /dev/null @@ -1,21 +0,0 @@ - - - - - S/390 and zSeries machine types - - -Complete information regarding supported S/390 and zSeries machines can -be found in IBM's Redbook - -Linux for IBM eServer zSeries and S/390: Distributions in -chapter 2.1 or at the -technical details web page at -developerWorks. -In short, G5, Multiprise 3000, G6 and all zSeries are fully supported; -Multiprise 2000, G3 and G4 machines are supported with IEEE floating -point emulation and thus degraded performance. - - - - diff --git a/eu/hardware/supported/sparc.xml b/eu/hardware/supported/sparc.xml deleted file mode 100644 index 4ee2352eb..000000000 --- a/eu/hardware/supported/sparc.xml +++ /dev/null @@ -1,82 +0,0 @@ - - - - - CPU, Main Boards, and Video Support - - -Currently the &architecture; port supports -several types of Sparc systems. The most common identifiers for Sparc -systems are sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not -support very old sun4 hardware. However, the other systems are -supported. Sun4d has been tested the least of these, so expect -possible problems with regard to the kernel stability. Sun4c and -Sun4m, the most common of the older Sparc hardware, includes such -systems as SparcStation 1, 1+, IPC, IPX and the SparcStation LX, 5, -10, and 20, respectively. The UltraSPARC class systems fall under the -sun4u identifier, and are supported using the sun4u set of install -images. Some systems that fall under these supported identifiers are -known to not be supported. Known unsupported systems are the AP1000 -multicomputer and the Tadpole Sparcbook 1. See the -Linux for SPARCProcessors FAQ -for complete information. - - - - Memory Configuration - - -Some older Sun workstations, notably the Sun IPX and Sun IPC have -memory banks located at fixed locations in physical memory. Thus if -the banks are not filled gaps will exist in the physical memory space. -The Linux installation requires a contiguous memory block into which -to load the kernel and the initial RAMdisk. If this is not available a -`Data Access Exception' will result. - - - -Thus you must configure the memory so that the lowest memory block is -contiguous for at least 8Mb. In the IPX and IPC cited above, memory banks -are mapped in at 16Mb boundaries. In effect this means that you must have -a sufficiently large SIMM in bank zero to hold the kernel and RAMdisk. -In this case 4Mb is not sufficient. - - - -Example: -In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM. There are four -SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS -connectors]. You must therefore install the 16Mb SIMM in bank 0; it is -then recommended to install the 4Mb SIMM in bank 2. - - - - - Graphics Configuration - - -Especially in the case of older Sun workstations, it is very common -for there to be an onboard framebuffer which has been superseded (for -example the bwtwo on a sun IPC), and an SBUS card containing a later -probably accelerated buffer is then plugged in to an SBUS slot. -Under Solaris/SunOS this causes no problems because both cards are -initialised. - - - -However with Linux this can cause a problem, in that the boot PROM -monitor may display its output on this additional card; however the -linux kernel boot messages may then be directed to the original on -board framebuffer, leaving no error messages on -the screen, with the machine apparently stuck loading the RAMdisk. - - - -To avoid this problem, connect the monitor (if required) to the video -card in the lowest numbered SBUS slot (on motherboard card counts -as below external slots). Alternatively it is possible to use a serial -console. - - - - -- cgit v1.2.3