From 805d7e1bf2b59dcf03879aafc8997f69989b132d Mon Sep 17 00:00:00 2001
From: Samuel Thibault <sthibault@debian.org>
Date: Fri, 2 Sep 2016 00:24:29 +0000
Subject: Small fixes from victory

---
 en/boot-installer/arm.xml           | 6 +++---
 en/boot-installer/x86.xml           | 2 +-
 en/preparing/bios-setup/powerpc.xml | 5 +++--
 3 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'en')

diff --git a/en/boot-installer/arm.xml b/en/boot-installer/arm.xml
index 784995dac..f0293948c 100644
--- a/en/boot-installer/arm.xml
+++ b/en/boot-installer/arm.xml
@@ -91,9 +91,9 @@
       Run a serial console at 115200, 8bit no parity, and boot the
       Juno. It should boot from the USB stick to a GRUB menu.
       The console config is not correctly detected on Juno so just hitting
-      return will show no kernel output. Set the console to  
+      &enterkey; will show no kernel output. Set the console to  
 <informalexample><screen>console=ttyAMA0,115200n8</screen></informalexample>
-      as described in (<xref linkend="arm64-console-setup"/>). <keycombo><keycap>Control</keycap>
+      (as described in <xref linkend="arm64-console-setup"/>). <keycombo><keycap>Control</keycap>
 <keycap>x</keycap></keycombo> to boot should show you the &d-i; screens,
       and allow you to proceed with a standard installation.
     </para>
@@ -180,7 +180,7 @@ printenv kernel_addr_r ramdisk_addr_r fdt_addr_r
         systems based on Allwinner SunXi SOCs (e.g.  the Allwinner A10,
         architecture name <quote>sun4i</quote> or the Allwinner A20,
         architecture name <quote>sun7i</quote>), you can e.g.  use the
-        follwing values:
+        following values:
 <informalexample><screen>
 setenv kernel_addr_r 0x46000000
 setenv fdt_addr_r 0x47000000
diff --git a/en/boot-installer/x86.xml b/en/boot-installer/x86.xml
index fcda0fa41..0c5024e30 100644
--- a/en/boot-installer/x86.xml
+++ b/en/boot-installer/x86.xml
@@ -308,7 +308,7 @@ When the installer boots, you should be presented with a friendly graphical
 screen showing the &debian; logo and a menu:
 
 <informalexample><screen>
-Installer boot menu
+&debian-gnu; installer boot menu
 
 Graphical install
 Install
diff --git a/en/preparing/bios-setup/powerpc.xml b/en/preparing/bios-setup/powerpc.xml
index 58db25d1d..f03f3d23c 100644
--- a/en/preparing/bios-setup/powerpc.xml
+++ b/en/preparing/bios-setup/powerpc.xml
@@ -96,14 +96,15 @@ Perform the following steps for the update:
 <orderedlist>
 <listitem><para>
     Save the level of the existing firmware before really updating. In
-    ASM, in the system menu, click <command>Service Aids ??? Service Processor
+    ASM, in the system menu, click <command>Service Aids -&gt; Service Processor
     Command Line</command>, and run the following command:
 <informalexample><screen>
      cupdcmd -f
 </screen></informalexample>
 </para></listitem><listitem><para>
     Download the .img file of the level of firmware to be updated to a
-    location in the host filesystem. Refer to IBM Fix Central for downloading
+    location in the host filesystem. Refer to
+    <ulink url="&url-ibm-fixcentral;">IBM Fix Central</ulink> for downloading
     the image file.
 </para><para>
     Verify the image downloaded by running the following command and
-- 
cgit v1.2.3