From 901ed96dbd1f58c817c78492ea5041b2c262f821 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sun, 19 Mar 2006 03:34:30 +0000 Subject: Add support for the Broadcom BCM91480B evaluation board (aka "BigSur"). --- en/boot-installer/mips.xml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'en/boot-installer/mips.xml') diff --git a/en/boot-installer/mips.xml b/en/boot-installer/mips.xml index f03084b73..fd776cbf1 100644 --- a/en/boot-installer/mips.xml +++ b/en/boot-installer/mips.xml @@ -29,10 +29,10 @@ in the command monitor to do this. - Broadcom BCM91250A TFTP Booting + Broadcom BCM91250A and BCM91480B TFTP Booting -On the Broadcom BCM91250A evaluation board, you have to load the SiByl boot +On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot loader via TFTP which will then load and start the Debian installer. In most cases, you will first obtain an IP address via DHCP but it is also possible to configure a static address. In order to use DHCP, you can @@ -86,7 +86,7 @@ bootp(): append="root=/dev/sda1" - Broadcom BCM91250A TFTP Booting + Broadcom BCM91250A and BCM91480B TFTP Booting You cannot pass any boot parameters directly from the CFE prompt. Instead, -- cgit v1.2.3