From 73bfca3a726a0cde805b9d3239af205b17b35651 Mon Sep 17 00:00:00 2001
From: Samuel Thibault <sthibault@debian.org>
Date: Sat, 18 Apr 2015 12:05:56 +0000
Subject: Add missing section

---
 de/boot-installer/arm.xml | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'de')

diff --git a/de/boot-installer/arm.xml b/de/boot-installer/arm.xml
index b59cd6710..60d49ae9c 100644
--- a/de/boot-installer/arm.xml
+++ b/de/boot-installer/arm.xml
@@ -238,8 +238,42 @@ bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
        ${fdt_addr_r}-Parameter einfach weg.
       </para>
     </sect3>
+
+    <sect3 arch="armhf" id="boot-armhf-netboot.tar.gz">
+      <title>Pre-built netboot tarball</title>
+      <para>
+        &debian; provides a pre-built tarball (&armmp-netboot-tarball;)
+        that can simply be unpacked on your tftp server and contains
+        all files necessary for netbooting.  It also includes a boot
+        script that automates all steps to load the installer.  Modern
+        U-Boot versions contain a tftp autoboot feature that becomes
+        active if there is no bootable local storage device (MMC/SD,
+        USB, IDE/SATA/SCSI) and then loads this boot script from the
+        tftp server.  Prerequisite for using this feature is that you
+        have a dhcp server in your network which provides the client
+        with the address of the tftp server.
+      </para>
+      <para>
+        If you would like to trigger the tftp autoboot feature from the
+        U-Boot commandline, you can use the follwing command:
+        <informalexample><screen>run bootcmd_dhcp</screen></informalexample>
+      </para>
+      <para>
+        To manually load the bootscript provided by the tarball, you can
+        alternatively issue the following commands at the U-Boot prompt:
+
+<informalexample><screen>
+setenv autoload no
+dhcp
+tftpboot ${scriptaddr} /debian-installer/armhf/tftpboot.scr
+source ${scriptaddr}
+</screen></informalexample>
+
+      </para>
+    </sect3>
   </sect2> 
 
+
   <sect2 arch="arm64" condition="bootable-usb" id="usb-boot">
   <title>Booten von USB-Stick mit UEFI</title>
 
-- 
cgit v1.2.3