From 325e7229b079ce8367df7a7571aad8bfc8e1e5a9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sat, 22 Aug 2009 15:52:14 +0000 Subject: Remove all untranslated documents for Danish --- da/appendix/files.xml | 214 -------------------------------------------------- 1 file changed, 214 deletions(-) delete mode 100644 da/appendix/files.xml (limited to 'da/appendix/files.xml') diff --git a/da/appendix/files.xml b/da/appendix/files.xml deleted file mode 100644 index 7637513a3..000000000 --- a/da/appendix/files.xml +++ /dev/null @@ -1,214 +0,0 @@ - - - - - Linux Devices - - -In Linux you have various special files in -/dev. These files are called devices files. In -the Unix world accessing hardware is different. There you have a -special file which actually runs a driver which in turn accesses the -hardware. The device file is an interface to the actual system -component. Files under /dev also behave -differently than ordinary files. Below are the most important device -files listed. - - - - - - fd0 - First Floppy Drive - - fd1 - Second Floppy Drive - - - - - - hda - IDE Hard disk / CD-ROM on the first IDE port (Master) - - hdb - IDE Hard disk / CD-ROM on the first IDE port (Slave) - - hdc - IDE Hard disk / CD-ROM on the second IDE port (Master) - - hdd - IDE Hard disk / CD-ROM on the second IDE port (Slave) - - hda1 - First partition of the first IDE hard disk - - hdd15 - Fifteenth partition of the fourth IDE hard disk - - - - - - sda - SCSI Hard disk with lowest SCSI ID (e.g. 0) - - sdb - SCSI Hard disk with next higher SCSI ID (e.g. 1) - - sdc - SCSI Hard disk with next higher SCSI ID (e.g. 2) - - sda1 - First partition of the first SCSI hard disk - - sdd10 - Tenth partition of the fourth SCSI hard disk - - - - - - sr0 - SCSI CD-ROM with the lowest SCSI ID - - sr1 - SCSI CD-ROM with the next higher SCSI ID - - - - - - ttyS0 - Serial port 0, COM1 under MS-DOS - - ttyS1 - Serial port 1, COM2 under MS-DOS - - psaux - PS/2 mouse device - - gpmdata - Pseudo device, repeater data from GPM (mouse) daemon - - - - - - cdrom - Symbolic link to the CD-ROM drive - - mouse - Symbolic link to the mouse device file - - - - - - null - Everything pointed to this device will disappear - - zero - One can endlessly read zeros out of this device - - - - - - -Setting Up Your Mouse - - - -The mouse can be used in both the Linux console (with gpm) and the X window -environment. The two uses can be made compatible if the gpm repeater is used -to allow the signal to flow to the X server as shown: - -mouse => /dev/psaux => gpm => /dev/gpmdata -> /dev/mouse => X - /dev/ttyS0 (repeater) (symlink) - /dev/ttyS1 - - - - -Set the repeater protocol to be raw (in /etc/gpm.conf) while -setting X to the original mouse protocol in /etc/X11/XF86Config -or /etc/X11/XF86Config-4. - - - -This approach to use gpm even in X has advantages when the mouse is -unplugged inadvertently. Simply restarting gpm with - -user@debian:# /etc/init.d/gpm restart - -will re-connect the mouse in software without restarting X. - - - -If gpm is disabled or not installed with some reason, make sure to set X to -read directly from the mouse device such as /dev/psaux. For details, refer -to the 3-Button Mouse mini-Howto at -/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz, -man gpm, -/usr/share/doc/gpm/FAQ.gz, and -README.mouse. - - - -For PowerPC, in /etc/X11/XF86Config or -/etc/X11/XF86Config-4, set the mouse device to -"/dev/input/mice". - - - -Modern kernels give you the capability to emulate a three-button mouse -when your mouse only has one button. Just add the following lines to -/etc/sysctl.conf file. - - - -# 3-button mouse emulation -# turn on emulation -/dev/mac_hid/mouse_button_emulation = 1 -# Send middle mouse button signal with the F11 key -/dev/mac_hid/mouse_button2_keycode = 87 -# Send right mouse button signal with the F12 key -/dev/mac_hid/mouse_button3_keycode = 88 -# For different keys, use showkey to tell you what the code is. - - - - - - - - Disk Space Needed for Tasks - - -The base sarge installation for i386, including all standard packages, -requires 178MB of disk space. - - - -The following table lists sizes reported by aptitude for the tasks listed in -tasksel. Note that some tasks have overlapping constituents, so the total -installed size for two tasks together may be less than the total obtained by -adding the numbers up. - - - - -Task Installed Download Space Needed - Size (MB) Size (MB) To Install (MB) - -Desktop 1537 521 2058 -Web server 71 21 92 -Print server 240 83 323 -Mail server 41 12 53 -File server 85 34 119 -SQL database 108 33 141 - - - - -- cgit v1.2.3