From 1ea73eea5ecc6a8ed901316049259aee737ee554 Mon Sep 17 00:00:00 2001
From: Joey Hess <joeyh@debian.org>
Date: Fri, 7 Oct 2005 19:51:38 +0000
Subject: move manual to top-level directory, split out of debian-installer
 package

---
 ca/install-methods/download/alpha.xml   | 36 ++++++++++++++++++++++++++++++++
 ca/install-methods/download/arm.xml     | 37 +++++++++++++++++++++++++++++++++
 ca/install-methods/download/m68k.xml    | 23 ++++++++++++++++++++
 ca/install-methods/download/powerpc.xml | 28 +++++++++++++++++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 ca/install-methods/download/alpha.xml
 create mode 100644 ca/install-methods/download/arm.xml
 create mode 100644 ca/install-methods/download/m68k.xml
 create mode 100644 ca/install-methods/download/powerpc.xml

(limited to 'ca/install-methods/download')

diff --git a/ca/install-methods/download/alpha.xml b/ca/install-methods/download/alpha.xml
new file mode 100644
index 000000000..ff0250415
--- /dev/null
+++ b/ca/install-methods/download/alpha.xml
@@ -0,0 +1,36 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28997 untranslated -->
+
+
+   <sect3 arch="alpha"><title>Alpha Installation Files</title>
+<para>
+
+If you choose to boot from ARC console firmware using
+<command>MILO</command>, you will also need to prepare a disk
+containing <command>MILO</command> and <command>LINLOAD.EXE</command>
+from the provided disk images. See <xref linkend="alpha-firmware"/>
+for more information on Alpha
+firmware and boot loaders. The floppy images can be found in the
+<filename>MILO</filename> directory as
+<filename>milo_<replaceable>subarchitecture</replaceable>.bin</filename>.
+
+</para><para>
+
+Unfortunately, these <command>MILO</command> images could not be
+tested and might not work for all subarchitectures. If you find it
+doesn't work for you, try copying the appropriate
+<command>MILO</command> binary onto the floppy
+(<ulink url="&disturlftp;main/disks-alpha/current/MILO/"></ulink>).
+Note that those <command>MILO</command>s don't support ext2 <quote>sparse
+superblocks</quote>, so you can't use them to load kernels from newly
+generated ext2 file systems. As a workaround, you can put your kernel
+onto the FAT partition next to the <command>MILO</command>.
+
+</para><para>
+
+<command>MILO</command> binaries are platform-specific.  See
+<xref linkend="alpha-cpus"/> to determine the appropriate
+<command>MILO</command> image for your Alpha platform.
+
+</para>
+   </sect3>
diff --git a/ca/install-methods/download/arm.xml b/ca/install-methods/download/arm.xml
new file mode 100644
index 000000000..447f9c376
--- /dev/null
+++ b/ca/install-methods/download/arm.xml
@@ -0,0 +1,37 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28672 -->
+
+
+   <sect3 arch="arm" id="riscpc-install-files">
+   <title>Fitxers d'instal·lació de RiscPC</title>
+<para>
+
+L'instal·lador de RiscPC s'arrenca inicialment des de RISC OS. Tots els
+fitxers necessaris es proveeixen en un arxiu Zip, &rpc-install-kit;.
+Descarregueu aquest fitxer a la maquina RISC OS, copieu el
+component <filename>linloader.!Boot</filename> a lloc, i executeu
+<filename>!dInstall</filename>.
+
+</para>
+   </sect3>
+
+   <sect3 arch="arm" id="netwinder-install-files">
+   <title>Fitxers d'instal·lació de NetWinder</title>
+<para>
+
+La manera més fàcil d'arrencar un NetWinder és a traves de la xarxa,
+fent servir la imatge de TFTP proveïda &netwinder-boot-img;.
+
+</para>
+   </sect3>
+
+   <sect3 arch="arm" id="cats-install-files">
+   <title>Fitxers d'instal·lació de CATS</title>
+<para>
+
+L'únic mètode d'arrencar per a CATS és fer servir la imatge combinada
+&cats-boot-img;. Això es pot carregar des de qualsevol dispositiu
+accessible per al carregador d'arranc Cyclone.
+
+</para>
+   </sect3>
diff --git a/ca/install-methods/download/m68k.xml b/ca/install-methods/download/m68k.xml
new file mode 100644
index 000000000..4ea3e1845
--- /dev/null
+++ b/ca/install-methods/download/m68k.xml
@@ -0,0 +1,23 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28672 -->
+
+
+   <sect3 arch="m68k" id="kernel-22">
+   <title>Triant un nucli</title>
+
+<para>
+
+Algunes subarquitectures de m68k tenen nuclis a triar per a la instal·lació.
+En general recomanem que proveu primer la versió mes recent. Si la vostra
+subarquitectura o màquina necessita emprar un nucli 2.2.x, estigueu segurs
+que trieu alguna de les imatges que suporten nuclis 2.2.x (vegeu el
+<ulink url="&disturl;/main/installer-&architecture;/current/images/MANIFEST">MANIFEST</ulink>).
+
+</para>
+<para>
+
+Totes les imatges de m68k per a ser emprades amb nuclis 2.2.x necessiten el
+paràmetre de nucli &ramdisksize;.
+
+</para>
+   </sect3>
diff --git a/ca/install-methods/download/powerpc.xml b/ca/install-methods/download/powerpc.xml
new file mode 100644
index 000000000..d1dd228f9
--- /dev/null
+++ b/ca/install-methods/download/powerpc.xml
@@ -0,0 +1,28 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28672 untranslated -->
+
+<!-- commented out as it seems out of date and the links are broken
+
+   <sect3 arch="powerpc" id="newworld-install-files">
+   <title>NewWorld MacOS Installation Files </title>
+<para>
+
+For floppy-less installation on NewWorld Macs, it may be most
+convenient to obtain all the necessary files packaged into one Stuffit
+archive from
+<ulink url="&url-powerpc-of;"></ulink> (separate instructions are
+included in the archive). Otherwise, obtain the normal installation
+files listed above. Retrieve the files to an HFS (not HFS+) partition
+on your system.  You will also need the <filename>yaboot</filename> and
+<filename>yaboot.conf</filename> files from the
+<ulink url="&downloadable-file;new-powermac/">new-powermac</ulink> or
+<ulink url="&downloadable-file;powermac/">powermac</ulink> archive folder.
+However, the newest G4 PowerMacs, and those that work without MacOS 9,
+need the newest version of <command>yaboot</command>; the one in the
+archive will not work. Obtain the newest version from
+<ulink url="http://penguinppc.org/projects/yaboot/"></ulink>.
+
+</para>
+   </sect3>
+
+-->
-- 
cgit v1.2.3